diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/dwc3/core.c | 48 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 11 | ||||
-rw-r--r-- | drivers/usb/gadget/composite.c | 8 | ||||
-rw-r--r-- | drivers/usb/gadget/function/f_midi.c | 9 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/atmel_usba_udc.c | 14 | ||||
-rw-r--r-- | drivers/usb/phy/phy-qcom-8x16-usb.c | 72 |
6 files changed, 51 insertions, 111 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 17fd81447c9f..fa20f5a99d12 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; + int retries = 1000; int ret; - /* Before Resetting PHY, put Core in Reset */ - reg = dwc3_readl(dwc->regs, DWC3_GCTL); - reg |= DWC3_GCTL_CORESOFTRESET; - dwc3_writel(dwc->regs, DWC3_GCTL, reg); - - /* Assert USB3 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - - /* Assert USB2 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); ret = phy_init(dwc->usb2_generic_phy); @@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) phy_exit(dwc->usb2_generic_phy); return ret; } - mdelay(100); - /* Clear USB3 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + /* + * We're resetting only the device side because, if we're in host mode, + * XHCI driver will reset the host block. If dwc3 was configured for + * host-only mode, then we can return early. + */ + if (dwc->dr_mode == USB_DR_MODE_HOST) + return 0; - /* Clear USB2 PHY reset */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg |= DWC3_DCTL_CSFTRST; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); - mdelay(100); + do { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (!(reg & DWC3_DCTL_CSFTRST)) + return 0; - /* After PHYs are stable we can take Core out of reset state */ - reg = dwc3_readl(dwc->regs, DWC3_GCTL); - reg &= ~DWC3_GCTL_CORESOFTRESET; - dwc3_writel(dwc->regs, DWC3_GCTL, reg); + udelay(1); + } while (--retries); - return 0; + return -ETIMEDOUT; } /** diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3ac170f9d94d..d54a028cdfeb 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -568,7 +568,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); if (!usb_endpoint_xfer_isoc(desc)) - return 0; + goto out; /* Link TRB for ISOC. The HWO bit is never reset */ trb_st_hw = &dep->trb_pool[0]; @@ -582,9 +582,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, trb_link->ctrl |= DWC3_TRB_CTRL_HWO; } +out: switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: - strlcat(dep->name, "-control", sizeof(dep->name)); + /* don't change name */ break; case USB_ENDPOINT_XFER_ISOC: strlcat(dep->name, "-isoc", sizeof(dep->name)); @@ -2487,7 +2488,11 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc) * implemented. */ - dwc->gadget_driver->resume(&dwc->gadget); + if (dwc->gadget_driver && dwc->gadget_driver->resume) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->resume(&dwc->gadget); + spin_lock(&dwc->lock); + } } static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a5c62093c26c..de9ffd60fcfa 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -656,7 +656,8 @@ static int bos_desc(struct usb_composite_dev *cdev) ssp_cap->bmAttributes = cpu_to_le32(1); /* Min RX/TX Lane Count = 1 */ - ssp_cap->wFunctionalitySupport = (1 << 8) | (1 << 12); + ssp_cap->wFunctionalitySupport = + cpu_to_le16((1 << 8) | (1 << 12)); /* * bmSublinkSpeedAttr[0]: @@ -666,7 +667,7 @@ static int bos_desc(struct usb_composite_dev *cdev) * LSM = 10 (10 Gbps) */ ssp_cap->bmSublinkSpeedAttr[0] = - (3 << 4) | (1 << 14) | (0xa << 16); + cpu_to_le32((3 << 4) | (1 << 14) | (0xa << 16)); /* * bmSublinkSpeedAttr[1] = * ST = Symmetric, TX @@ -675,7 +676,8 @@ static int bos_desc(struct usb_composite_dev *cdev) * LSM = 10 (10 Gbps) */ ssp_cap->bmSublinkSpeedAttr[1] = - (3 << 4) | (1 << 14) | (0xa << 16) | (1 << 7); + cpu_to_le32((3 << 4) | (1 << 14) | + (0xa << 16) | (1 << 7)); } return le16_to_cpu(bos->wTotalLength); diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 84c0ee5ebd1e..56e2dde99b03 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -24,6 +24,7 @@ #include <linux/slab.h> #include <linux/device.h> #include <linux/kfifo.h> +#include <linux/spinlock.h> #include <sound/core.h> #include <sound/initval.h> @@ -89,6 +90,7 @@ struct f_midi { unsigned int buflen, qlen; /* This fifo is used as a buffer ring for pre-allocated IN usb_requests */ DECLARE_KFIFO_PTR(in_req_fifo, struct usb_request *); + spinlock_t transmit_lock; unsigned int in_last_port; struct gmidi_in_port in_ports_array[/* in_ports */]; @@ -597,17 +599,22 @@ static void f_midi_transmit(struct f_midi *midi) { struct usb_ep *ep = midi->in_ep; int ret; + unsigned long flags; /* We only care about USB requests if IN endpoint is enabled */ if (!ep || !ep->enabled) goto drop_out; + spin_lock_irqsave(&midi->transmit_lock, flags); + do { ret = f_midi_do_transmit(midi, ep); if (ret < 0) goto drop_out; } while (ret); + spin_unlock_irqrestore(&midi->transmit_lock, flags); + return; drop_out: @@ -1201,6 +1208,8 @@ static struct usb_function *f_midi_alloc(struct usb_function_instance *fi) if (status) goto setup_fail; + spin_lock_init(&midi->transmit_lock); + ++opts->refcnt; mutex_unlock(&opts->lock); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 81d42cce885a..18569de06b04 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1045,20 +1045,6 @@ static void reset_all_endpoints(struct usba_udc *udc) list_del_init(&req->queue); request_complete(ep, req, -ECONNRESET); } - - /* NOTE: normally, the next call to the gadget driver is in - * charge of disabling endpoints... usually disconnect(). - * The exception would be entering a high speed test mode. - * - * FIXME remove this code ... and retest thoroughly. - */ - list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { - if (ep->ep.desc) { - spin_unlock(&udc->lock); - usba_ep_disable(&ep->ep); - spin_lock(&udc->lock); - } - } } static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c index 579587d97217..3d7af85aecb9 100644 --- a/drivers/usb/phy/phy-qcom-8x16-usb.c +++ b/drivers/usb/phy/phy-qcom-8x16-usb.c @@ -65,9 +65,7 @@ struct phy_8x16 { void __iomem *regs; struct clk *core_clk; struct clk *iface_clk; - struct regulator *v3p3; - struct regulator *v1p8; - struct regulator *vdd; + struct regulator_bulk_data regulator[3]; struct reset_control *phy_reset; @@ -78,51 +76,6 @@ struct phy_8x16 { struct notifier_block reboot_notify; }; -static int phy_8x16_regulators_enable(struct phy_8x16 *qphy) -{ - int ret; - - ret = regulator_set_voltage(qphy->vdd, HSPHY_VDD_MIN, HSPHY_VDD_MAX); - if (ret) - return ret; - - ret = regulator_enable(qphy->vdd); - if (ret) - return ret; - - ret = regulator_set_voltage(qphy->v3p3, HSPHY_3P3_MIN, HSPHY_3P3_MAX); - if (ret) - goto off_vdd; - - ret = regulator_enable(qphy->v3p3); - if (ret) - goto off_vdd; - - ret = regulator_set_voltage(qphy->v1p8, HSPHY_1P8_MIN, HSPHY_1P8_MAX); - if (ret) - goto off_3p3; - - ret = regulator_enable(qphy->v1p8); - if (ret) - goto off_3p3; - - return 0; - -off_3p3: - regulator_disable(qphy->v3p3); -off_vdd: - regulator_disable(qphy->vdd); - - return ret; -} - -static void phy_8x16_regulators_disable(struct phy_8x16 *qphy) -{ - regulator_disable(qphy->v1p8); - regulator_disable(qphy->v3p3); - regulator_disable(qphy->vdd); -} - static int phy_8x16_notify_connect(struct usb_phy *phy, enum usb_device_speed speed) { @@ -261,7 +214,6 @@ static void phy_8x16_shutdown(struct usb_phy *phy) static int phy_8x16_read_devicetree(struct phy_8x16 *qphy) { - struct regulator_bulk_data regs[3]; struct device *dev = qphy->phy.dev; int ret; @@ -273,18 +225,15 @@ static int phy_8x16_read_devicetree(struct phy_8x16 *qphy) if (IS_ERR(qphy->iface_clk)) return PTR_ERR(qphy->iface_clk); - regs[0].supply = "v3p3"; - regs[1].supply = "v1p8"; - regs[2].supply = "vddcx"; + qphy->regulator[0].supply = "v3p3"; + qphy->regulator[1].supply = "v1p8"; + qphy->regulator[2].supply = "vddcx"; - ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(regs), regs); + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator), + qphy->regulator); if (ret) return ret; - qphy->v3p3 = regs[0].consumer; - qphy->v1p8 = regs[1].consumer; - qphy->vdd = regs[2].consumer; - qphy->phy_reset = devm_reset_control_get(dev, "phy"); if (IS_ERR(qphy->phy_reset)) return PTR_ERR(qphy->phy_reset); @@ -364,8 +313,9 @@ static int phy_8x16_probe(struct platform_device *pdev) if (ret < 0) goto off_core; - ret = phy_8x16_regulators_enable(qphy); - if (0 && ret) + ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator), + qphy->regulator); + if (WARN_ON(ret)) goto off_clks; qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify; @@ -387,7 +337,7 @@ off_extcon: extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB, &qphy->vbus_notify); off_power: - phy_8x16_regulators_disable(qphy); + regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); off_clks: clk_disable_unprepare(qphy->iface_clk); off_core: @@ -413,7 +363,7 @@ static int phy_8x16_remove(struct platform_device *pdev) clk_disable_unprepare(qphy->iface_clk); clk_disable_unprepare(qphy->core_clk); - phy_8x16_regulators_disable(qphy); + regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); return 0; } |