diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/b43/b43.h | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/main.c | 18 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/nphy.c | 15 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/phy_a.c | 11 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/phy_common.c | 91 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/phy_common.h | 75 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/phy_g.c | 218 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/phy_g.h | 22 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/xmit.c | 2 |
9 files changed, 341 insertions, 121 deletions
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fc280157596c..f9c8161671d9 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -173,6 +173,11 @@ enum { #define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */ #define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */ #define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */ +/* TSSI information */ +#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */ /* SHM_SHARED TX FIFO variables */ #define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */ #define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */ @@ -648,6 +653,11 @@ struct b43_wl { struct b43_qos_params qos_params[4]; /* Workqueue for updating QOS parameters in hardware. */ struct work_struct qos_update_work; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; }; /* In-memory representation of a cached microcode file. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index af43f03b3189..63bafc2f3f0a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2805,6 +2805,9 @@ static void b43_periodic_every60sec(struct b43_wldev *dev) if (ops->pwork_60sec) ops->pwork_60sec(dev); + + /* Force check the TX power emission now. */ + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); } static void b43_periodic_every30sec(struct b43_wldev *dev) @@ -2835,8 +2838,6 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) if (phy->ops->pwork_15sec) phy->ops->pwork_15sec(dev); - phy->ops->xmitpower(dev); - atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); } @@ -3382,10 +3383,13 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Adjust the desired TX power level. */ if (conf->power_level != 0) { - if (conf->power_level != phy->power_level) { - phy->power_level = conf->power_level; - phy->ops->xmitpower(dev); + spin_lock_irqsave(&wl->irq_lock, flags); + if (conf->power_level != phy->desired_txpower) { + phy->desired_txpower = conf->power_level; + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | + B43_TXPWR_IGNORE_TSSI); } + spin_unlock_irqrestore(&wl->irq_lock, flags); } /* Antennas for RX and management frame TX. */ @@ -3785,6 +3789,7 @@ static void setup_struct_phy_for_init(struct b43_wldev *dev, struct b43_phy *phy) { phy->hardware_power_control = !!modparam_hwpctl; + phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); } @@ -4204,6 +4209,8 @@ static void b43_op_stop(struct ieee80211_hw *hw) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); mutex_unlock(&wl->mutex); + + cancel_work_sync(&(wl->txpower_adjust_work)); } static int b43_op_set_retry_limit(struct ieee80211_hw *hw, @@ -4581,6 +4588,7 @@ static int b43_wireless_init(struct ssb_device *dev) INIT_LIST_HEAD(&wl->devlist); INIT_WORK(&wl->qos_update_work, b43_qos_update_work); INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); + INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); ssb_set_devtypedata(dev, wl); b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/nphy.c index 831986c459f8..4cfeab8560f6 100644 --- a/drivers/net/wireless/b43/nphy.c +++ b/drivers/net/wireless/b43/nphy.c @@ -34,10 +34,16 @@ void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) {//TODO } -void b43_nphy_xmitpower(struct b43_wldev *dev) +static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev) {//TODO } +static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + static void b43_chantab_radio_upload(struct b43_wldev *dev, const struct b43_nphy_channeltab_entry *e) { @@ -602,10 +608,6 @@ static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev) return 36; } -static void b43_nphy_op_xmitpower(struct b43_wldev *dev) -{//TODO -} - const struct b43_phy_operations b43_phyops_n = { .allocate = b43_nphy_op_allocate, .init = b43_nphy_op_init, @@ -617,5 +619,6 @@ const struct b43_phy_operations b43_phyops_n = { .software_rfkill = b43_nphy_op_software_rfkill, .switch_channel = b43_nphy_op_switch_channel, .get_default_chan = b43_nphy_op_get_default_chan, - .xmitpower = b43_nphy_op_xmitpower, + .recalc_txpower = b43_nphy_op_recalc_txpower, + .adjust_txpower = b43_nphy_op_adjust_txpower, }; diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c index dd347314b76c..4d7d59e30960 100644 --- a/drivers/net/wireless/b43/phy_a.c +++ b/drivers/net/wireless/b43/phy_a.c @@ -505,10 +505,16 @@ static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) b43_hf_write(dev, hf); } -static void b43_aphy_op_xmitpower(struct b43_wldev *dev) +static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev) {//TODO } +static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev) {//TODO } @@ -530,7 +536,8 @@ const struct b43_phy_operations b43_phyops_a = { .switch_channel = b43_aphy_op_switch_channel, .get_default_chan = b43_aphy_op_get_default_chan, .set_rx_antenna = b43_aphy_op_set_rx_antenna, - .xmitpower = b43_aphy_op_xmitpower, + .recalc_txpower = b43_aphy_op_recalc_txpower, + .adjust_txpower = b43_aphy_op_adjust_txpower, .pwork_15sec = b43_aphy_op_pwork_15sec, .pwork_60sec = b43_aphy_op_pwork_60sec, }; diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index 45074c05d51d..5a550a7af2e9 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -274,3 +274,94 @@ void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) phy->ops->software_rfkill(dev, state); phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); } + +/** + * b43_phy_txpower_adjust_work - TX power workqueue. + * + * Workqueue for updating the TX power parameters in hardware. + */ +void b43_phy_txpower_adjust_work(struct work_struct *work) +{ + struct b43_wl *wl = container_of(work, struct b43_wl, + txpower_adjust_work); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + + if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED))) + dev->phy.ops->adjust_txpower(dev); + + mutex_unlock(&wl->mutex); +} + +/* Called with wl->irq_lock locked */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) +{ + struct b43_phy *phy = &dev->phy; + unsigned long now = jiffies; + enum b43_txpwr_result result; + + if (!(flags & B43_TXPWR_IGNORE_TIME)) { + /* Check if it's time for a TXpower check. */ + if (time_before(now, phy->next_txpwr_check_time)) + return; /* Not yet */ + } + /* The next check will be needed in two seconds, or later. */ + phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); + + if ((dev->dev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->bus->boardinfo.type == SSB_BOARD_BU4306)) + return; /* No software txpower adjustment needed */ + + result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); + if (result == B43_TXPWR_RES_DONE) + return; /* We are done. */ + B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST); + B43_WARN_ON(phy->ops->adjust_txpower == NULL); + + /* We must adjust the transmission power in hardware. + * Schedule b43_phy_txpower_adjust_work(). */ + queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work); +} + +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset) +{ + const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK); + unsigned int a, b, c, d; + unsigned int average; + u32 tmp; + + tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset); + a = tmp & 0xFF; + b = (tmp >> 8) & 0xFF; + c = (tmp >> 16) & 0xFF; + d = (tmp >> 24) & 0xFF; + if (a == 0 || a == B43_TSSI_MAX || + b == 0 || b == B43_TSSI_MAX || + c == 0 || c == B43_TSSI_MAX || + d == 0 || d == B43_TSSI_MAX) + return -ENOENT; + /* The values are OK. Clear them. */ + tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) | + (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24); + b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp); + + if (is_ofdm) { + a = (a + 32) & 0x3F; + b = (b + 32) & 0x3F; + c = (c + 32) & 0x3F; + d = (d + 32) & 0x3F; + } + + /* Get the average of the values with 0.5 added to each value. */ + average = (a + b + c + d + 2) / 4; + if (is_ofdm) { + /* Adjust for CCK-boost */ + if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO) + & B43_HF_CCKBOOST) + average = (average >= 13) ? (average - 13) : 0; + } + + return average; +} diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h index 9b9635eda9c4..f8db9f40df5d 100644 --- a/drivers/net/wireless/b43/phy_common.h +++ b/drivers/net/wireless/b43/phy_common.h @@ -61,6 +61,17 @@ enum { }; /** + * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. + * + * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. + * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. + */ +enum b43_txpwr_result { + B43_TXPWR_RES_NEED_ADJUST, + B43_TXPWR_RES_DONE, +}; + +/** * struct b43_phy_operations - Function pointers for PHY ops. * * @prepare: Prepare the PHY. This is called before @init. @@ -96,8 +107,23 @@ enum { * @interf_mitigation: Switch the Interference Mitigation mode. * Can be NULL, if not supported. * - * @xmitpower: FIXME REMOVEME + * @recalc_txpower: Recalculate the transmission power parameters. + * This callback has to recalculate the TX power settings, + * but does not need to write them to the hardware, yet. + * Returns enum b43_txpwr_result to indicate whether the hardware + * needs to be adjusted. + * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower + * will be called later. + * If the parameter "ignore_tssi" is true, the TSSI values should + * be ignored and a recalculation of the power settings should be + * done even if the TSSI values did not change. + * This callback is called with wl->irq_lock held and must not sleep. * Must not be NULL. + * @adjust_txpower: Write the previously calculated TX power settings + * (from @recalc_txpower) to the hardware. + * This function may sleep. + * Can be NULL, if (and ONLY if) @recalc_txpower _always_ + * returns B43_TXPWR_RES_DONE. * * @pwork_15sec: Periodic work. Called every 15 seconds. * Can be NULL, if not required. @@ -127,7 +153,9 @@ struct b43_phy_operations { enum b43_interference_mitigation new_mode); /* Transmission power adjustment */ - void (*xmitpower)(struct b43_wldev *dev); + enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, + bool ignore_tssi); + void (*adjust_txpower)(struct b43_wldev *dev); /* Misc */ void (*pwork_15sec)(struct b43_wldev *dev); @@ -183,11 +211,15 @@ struct b43_phy { /* Desired TX power level (in dBm). * This is set by the user and adjusted in b43_phy_xmitpower(). */ - u8 power_level; + int desired_txpower; /* Hardware Power Control enabled? */ bool hardware_power_control; + /* The time (in absolute jiffies) when the next TX power output + * check is needed. */ + unsigned long next_txpwr_check_time; + /* current channel */ unsigned int channel; @@ -309,4 +341,41 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); */ void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); +/** + * b43_phy_txpower_check - Check TX power output. + * + * Compare the current TX power output to the desired power emission + * and schedule an adjustment in case it mismatches. + * Requires wl->irq_lock locked. + * + * @flags: OR'ed enum b43_phy_txpower_check_flags flags. + * See the docs below. + */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); +/** + * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() + * + * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo + * the check now. + * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average + * TSSI did not change. + */ +enum b43_phy_txpower_check_flags { + B43_TXPWR_IGNORE_TIME = (1 << 0), + B43_TXPWR_IGNORE_TSSI = (1 << 1), +}; + +struct work_struct; +void b43_phy_txpower_adjust_work(struct work_struct *work); + +/** + * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. + * + * @shm_offset: The SHM address to read the values from. + * + * Returns the average of the 4 TSSI values, or a negative error code. + */ +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); + + #endif /* LINUX_B43_PHY_COMMON_H_ */ diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c index bb95c54cd43d..fce84896d34c 100644 --- a/drivers/net/wireless/b43/phy_g.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -2659,6 +2659,7 @@ static int b43_gphy_op_allocate(struct b43_wldev *dev) /* OFDM-table address caching. */ gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; + gphy->average_tssi = 0xFF; lo = kzalloc(sizeof(*lo), GFP_KERNEL); if (!lo) { @@ -3011,113 +3012,20 @@ static void b43_put_attenuation_into_ranges(struct b43_wldev *dev, *_bbatt = clamp_val(bbatt, bb_min, bb_max); } -static void b43_gphy_op_xmitpower(struct b43_wldev *dev) +static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->dev->bus; struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; - u16 tmp; - s8 v0, v1, v2, v3; - s8 average; - int max_pwr; - int desired_pwr, estimated_pwr, pwr_adjust; - int rfatt_delta, bbatt_delta; int rfatt, bbatt; u8 tx_control; - if (gphy->cur_idle_tssi == 0) - return; - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; - - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - tmp = 0; - - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) { - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0070); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0072); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) - return; - v0 = (v0 + 0x20) & 0x3F; - v1 = (v1 + 0x20) & 0x3F; - v2 = (v2 + 0x20) & 0x3F; - v3 = (v3 + 0x20) & 0x3F; - tmp = 1; - } - b43_shm_clear_tssi(dev); - - average = (v0 + v1 + v2 + v3 + 2) / 4; - - if (tmp && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) & 0x8)) - average -= 13; - - estimated_pwr = b43_gphy_estimate_power_out(dev, average); - - max_pwr = dev->dev->bus->sprom.maxpwr_bg; - if ((dev->dev->bus->sprom.boardflags_lo - & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G)) - max_pwr -= 0x3; - if (unlikely(max_pwr <= 0)) { - b43warn(dev->wl, - "Invalid max-TX-power value in SPROM.\n"); - max_pwr = 60; /* fake it */ - dev->dev->bus->sprom.maxpwr_bg = max_pwr; - } - - /*TODO: - max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr) - where REG is the max power as per the regulatory domain - */ - - /* Get desired power (in Q5.2) */ - desired_pwr = INT_TO_Q52(phy->power_level); - /* And limit it. max_pwr already is Q5.2 */ - desired_pwr = clamp_val(desired_pwr, 0, max_pwr); - if (b43_debug(dev, B43_DBG_XMITPOWER)) { - b43dbg(dev->wl, - "Current TX power output: " Q52_FMT - " dBm, " "Desired TX power output: " - Q52_FMT " dBm\n", Q52_ARG(estimated_pwr), - Q52_ARG(desired_pwr)); - } - - /* Calculate the adjustment delta. */ - pwr_adjust = desired_pwr - estimated_pwr; - - /* RF attenuation delta. */ - rfatt_delta = ((pwr_adjust + 7) / 8); - /* Lower attenuation => Bigger power output. Negate it. */ - rfatt_delta = -rfatt_delta; - - /* Baseband attenuation delta. */ - bbatt_delta = pwr_adjust / 2; - /* Lower attenuation => Bigger power output. Negate it. */ - bbatt_delta = -bbatt_delta; - /* RF att affects power level 4 times as much as - * Baseband attennuation. Subtract it. */ - bbatt_delta -= 4 * rfatt_delta; - - /* So do we finally need to adjust something? */ - if ((rfatt_delta == 0) && (bbatt_delta == 0)) - return; + spin_lock_irq(&dev->wl->irq_lock); /* Calculate the new attenuation values. */ bbatt = gphy->bbatt.att; - bbatt += bbatt_delta; + bbatt += gphy->bbatt_delta; rfatt = gphy->rfatt.att; - rfatt += rfatt_delta; + rfatt += gphy->rfatt_delta; b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); tx_control = gphy->tx_control; @@ -3152,6 +3060,14 @@ static void b43_gphy_op_xmitpower(struct b43_wldev *dev) gphy->rfatt.att = rfatt; gphy->bbatt.att = bbatt; + /* We drop the lock early, so we can sleep during hardware + * adjustment. Possible races with op_recalc_txpower are harmless, + * as we will be called once again in case we raced. */ + spin_unlock_irq(&dev->wl->irq_lock); + + if (b43_debug(dev, B43_DBG_XMITPOWER)) + b43dbg(dev->wl, "Adjusting TX power\n"); + /* Adjust the hardware */ b43_phy_lock(dev); b43_radio_lock(dev); @@ -3161,6 +3077,111 @@ static void b43_gphy_op_xmitpower(struct b43_wldev *dev) b43_phy_unlock(dev); } +static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int average_tssi; + int cck_result, ofdm_result; + int estimated_pwr, desired_pwr, pwr_adjust; + int rfatt_delta, bbatt_delta; + unsigned int max_pwr; + + /* First get the average TSSI */ + cck_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_CCK); + ofdm_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_OFDM_G); + if ((cck_result < 0) && (ofdm_result < 0)) { + /* No TSSI information available */ + if (!ignore_tssi) + goto no_adjustment_needed; + cck_result = 0; + ofdm_result = 0; + } + if (cck_result < 0) + average_tssi = ofdm_result; + else if (ofdm_result < 0) + average_tssi = cck_result; + else + average_tssi = (cck_result + ofdm_result) / 2; + /* Merge the average with the stored value. */ + if (likely(gphy->average_tssi != 0xFF)) + average_tssi = (average_tssi + gphy->average_tssi) / 2; + gphy->average_tssi = average_tssi; + B43_WARN_ON(average_tssi >= B43_TSSI_MAX); + + /* Estimate the TX power emission based on the TSSI */ + estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi); + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + max_pwr = dev->dev->bus->sprom.maxpwr_bg; + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + max_pwr -= 3; /* minus 0.75 */ + if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) { + b43warn(dev->wl, + "Invalid max-TX-power value in SPROM.\n"); + max_pwr = INT_TO_Q52(20); /* fake it */ + dev->dev->bus->sprom.maxpwr_bg = max_pwr; + } + + /* Get desired power (in Q5.2) */ + if (phy->desired_txpower < 0) + desired_pwr = INT_TO_Q52(0); + else + desired_pwr = INT_TO_Q52(phy->desired_txpower); + /* And limit it. max_pwr already is Q5.2 */ + desired_pwr = clamp_val(desired_pwr, 0, max_pwr); + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + b43dbg(dev->wl, + "[TX power] current = " Q52_FMT + " dBm, desired = " Q52_FMT + " dBm, max = " Q52_FMT "\n", + Q52_ARG(estimated_pwr), + Q52_ARG(desired_pwr), + Q52_ARG(max_pwr)); + } + + /* Calculate the adjustment delta. */ + pwr_adjust = desired_pwr - estimated_pwr; + if (pwr_adjust == 0) + goto no_adjustment_needed; + + /* RF attenuation delta. */ + rfatt_delta = ((pwr_adjust + 7) / 8); + /* Lower attenuation => Bigger power output. Negate it. */ + rfatt_delta = -rfatt_delta; + + /* Baseband attenuation delta. */ + bbatt_delta = pwr_adjust / 2; + /* Lower attenuation => Bigger power output. Negate it. */ + bbatt_delta = -bbatt_delta; + /* RF att affects power level 4 times as much as + * Baseband attennuation. Subtract it. */ + bbatt_delta -= 4 * rfatt_delta; + + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust; + b43dbg(dev->wl, + "[TX power deltas] %s" Q52_FMT " dBm => " + "bbatt-delta = %d, rfatt-delta = %d\n", + (pwr_adjust < 0 ? "-" : ""), Q52_ARG(dbm), + bbatt_delta, rfatt_delta); + } + /* So do we finally need to adjust something in hardware? */ + if ((rfatt_delta == 0) && (bbatt_delta == 0)) + goto no_adjustment_needed; + + /* Save the deltas for later when we adjust the power. */ + gphy->bbatt_delta = bbatt_delta; + gphy->rfatt_delta = rfatt_delta; + + /* We need to adjust the TX power on the device. */ + return B43_TXPWR_RES_NEED_ADJUST; + +no_adjustment_needed: + return B43_TXPWR_RES_DONE; +} + static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; @@ -3223,7 +3244,8 @@ const struct b43_phy_operations b43_phyops_g = { .get_default_chan = b43_gphy_op_get_default_chan, .set_rx_antenna = b43_gphy_op_set_rx_antenna, .interf_mitigation = b43_gphy_op_interf_mitigation, - .xmitpower = b43_gphy_op_xmitpower, + .recalc_txpower = b43_gphy_op_recalc_txpower, + .adjust_txpower = b43_gphy_op_adjust_txpower, .pwork_15sec = b43_gphy_op_pwork_15sec, .pwork_60sec = b43_gphy_op_pwork_60sec, }; diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h index 1f0daebd6eb6..7f95edea1c63 100644 --- a/drivers/net/wireless/b43/phy_g.h +++ b/drivers/net/wireless/b43/phy_g.h @@ -115,7 +115,6 @@ struct b43_txpower_lo_control; struct b43_phy_g { bool initialised; - bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ /* ACI (adjacent channel interference) flags. */ bool aci_enable; @@ -135,12 +134,26 @@ struct b43_phy_g { u16 minlowsig[2]; u16 minlowsigpos[2]; - /* TSSI to dBm table in use */ + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ const s8 *tssi2dbm; + /* tssi2dbm is kmalloc()ed. Only used for free()ing. */ + bool dyn_tssi_tbl; /* Target idle TSSI */ int tgt_idle_tssi; /* Current idle TSSI */ int cur_idle_tssi; + /* The current average TSSI. + * Needs irq_lock, as it's updated in the IRQ path. */ + u8 average_tssi; + /* Current TX power level attenuation control values */ + struct b43_bbatt bbatt; + struct b43_rfatt rfatt; + u8 tx_control; /* B43_TXCTL_XXX */ + /* The calculated attenuation deltas that are used later + * when adjusting the actual power output. */ + int bbatt_delta; + int rfatt_delta; /* LocalOscillator control values. */ struct b43_txpower_lo_control *lo_control; @@ -151,11 +164,6 @@ struct b43_phy_g { s16 lna_gain; /* LNA */ s16 pga_gain; /* PGA */ - /* Current TX power level attenuation control values */ - struct b43_bbatt bbatt; - struct b43_rfatt rfatt; - u8 tx_control; /* B43_TXCTL_XXX */ - /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index c8a831234e4a..5e0b71c3ad02 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -680,6 +680,8 @@ void b43_handle_txstatus(struct b43_wldev *dev, b43_pio_handle_txstatus(dev, status); else b43_dma_handle_txstatus(dev, status); + + b43_phy_txpower_check(dev, 0); } /* Fill out the mac80211 TXstatus report based on the b43-specific |