diff options
Diffstat (limited to 'drivers/video/fbdev/Kconfig')
| -rw-r--r-- | drivers/video/fbdev/Kconfig | 381 |
1 files changed, 58 insertions, 323 deletions
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 6df9bd09454a..5d93ecc01f6a 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -3,13 +3,10 @@ # fbdev configuration # -config FB_NOTIFY - bool - menuconfig FB - tristate "Support for frame buffer devices" + tristate "Support for frame buffer device drivers" + select FB_CORE select FB_NOTIFY - select VIDEO_CMDLINE help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and @@ -33,6 +30,12 @@ menuconfig FB <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. + This enables support for native frame buffer device (fbdev) drivers. + + The DRM subsystem provides support for emulated frame buffer devices + on top of KMS drivers, but this option allows legacy fbdev drivers to + be enabled as well. + Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. @@ -42,147 +45,10 @@ menuconfig FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. -config FIRMWARE_EDID - bool "Enable firmware EDID" - depends on FB - help - This enables access to the EDID transferred from the firmware. - On the i386, this is from the Video BIOS. Enable this if DDC/I2C - transfers do not work for your driver and if you are using - nvidiafb, i810fb or savagefb. - - In general, choosing Y for this option is safe. If you - experience extremely long delays while booting before you get - something on your display, try setting this to N. Matrox cards in - combination with certain motherboards and monitors are known to - suffer from this problem. - -config FB_DDC - tristate - depends on FB - select I2C_ALGOBIT - select I2C - -config FB_CFB_FILLRECT - tristate - depends on FB - help - Include the cfb_fillrect function for generic software rectangle - filling. This is used by drivers that don't provide their own - (accelerated) version. - -config FB_CFB_COPYAREA - tristate - depends on FB - help - Include the cfb_copyarea function for generic software area copying. - This is used by drivers that don't provide their own (accelerated) - version. - -config FB_CFB_IMAGEBLIT - tristate - depends on FB - help - Include the cfb_imageblit function for generic software image - blitting. This is used by drivers that don't provide their own - (accelerated) version. - -config FB_CFB_REV_PIXELS_IN_BYTE - bool - depends on FB - help - Allow generic frame-buffer functions to work on displays with 1, 2 - and 4 bits per pixel depths which has opposite order of pixels in - byte order to bytes in long order. - -config FB_SYS_FILLRECT - tristate - depends on FB - help - Include the sys_fillrect function for generic software rectangle - filling. This is used by drivers that don't provide their own - (accelerated) version and the framebuffer is in system RAM. - -config FB_SYS_COPYAREA - tristate - depends on FB - help - Include the sys_copyarea function for generic software area copying. - This is used by drivers that don't provide their own (accelerated) - version and the framebuffer is in system RAM. - -config FB_SYS_IMAGEBLIT - tristate - depends on FB - help - Include the sys_imageblit function for generic software image - blitting. This is used by drivers that don't provide their own - (accelerated) version and the framebuffer is in system RAM. - -config FB_PROVIDE_GET_FB_UNMAPPED_AREA - bool - depends on FB - help - Allow generic frame-buffer to provide get_fb_unmapped_area - function to provide shareable character device support on nommu. - -menuconfig FB_FOREIGN_ENDIAN - bool "Framebuffer foreign endianness support" - depends on FB - help - This menu will let you enable support for the framebuffers with - non-native endianness (e.g. Little-Endian framebuffer on a - Big-Endian machine). Most probably you don't have such hardware, - so it's safe to say "n" here. - -choice - prompt "Choice endianness support" - depends on FB_FOREIGN_ENDIAN - -config FB_BOTH_ENDIAN - bool "Support for Big- and Little-Endian framebuffers" - -config FB_BIG_ENDIAN - bool "Support for Big-Endian framebuffers only" - -config FB_LITTLE_ENDIAN - bool "Support for Little-Endian framebuffers only" - -endchoice - -config FB_SYS_FOPS - tristate - depends on FB - -config FB_DEFERRED_IO - bool - depends on FB - -config FB_IO_HELPERS - bool - depends on FB - select FB_CFB_COPYAREA - select FB_CFB_FILLRECT - select FB_CFB_IMAGEBLIT - -config FB_SYS_HELPERS - bool - depends on FB - select FB_SYS_COPYAREA - select FB_SYS_FILLRECT - select FB_SYS_FOPS - select FB_SYS_IMAGEBLIT - -config FB_SYS_HELPERS_DEFERRED - bool - depends on FB - select FB_DEFERRED_IO - select FB_SYS_HELPERS - config FB_HECUBA tristate depends on FB - depends on FB_DEFERRED_IO + select FB_SYSMEM_HELPERS_DEFERRED config FB_SVGALIB tristate @@ -195,47 +61,10 @@ config FB_MACMODES tristate depends on FB -config FB_BACKLIGHT - tristate - depends on FB - select BACKLIGHT_CLASS_DEVICE - -config FB_MODE_HELPERS - bool "Enable Video Mode Handling Helpers" - depends on FB - help - This enables functions for handling video modes using the - Generalized Timing Formula and the EDID parser. A few drivers rely - on this feature such as the radeonfb, rivafb, and the i810fb. If - your driver does not take advantage of this feature, choosing Y will - just increase the kernel size by about 5K. - -config FB_TILEBLITTING - bool "Enable Tile Blitting Support" - depends on FB - help - This enables tile blitting. Tile blitting is a drawing technique - where the screen is divided into rectangular sections (tiles), whereas - the standard blitting divides the screen into pixels. Because the - default drawing element is a tile, drawing functions will be passed - parameters in terms of number of tiles instead of number of pixels. - For example, to draw a single character, instead of using bitmaps, - an index to an array of bitmaps will be used. To clear or move a - rectangular section of a screen, the rectangle will be described in - terms of number of tiles in the x- and y-axis. - - This is particularly important to one driver, matroxfb. If - unsure, say N. - -comment "Frame buffer hardware drivers" - depends on FB - config FB_GRVGA tristate "Aeroflex Gaisler framebuffer support" depends on FB && SPARC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. @@ -308,9 +137,7 @@ config FB_ARMCLCD config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -348,9 +175,7 @@ config FB_IMX depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_MXC || COMPILE_TEST select LCD_CLASS_DEVICE - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS @@ -397,9 +222,7 @@ config FB_Q40 bool depends on (FB = y) && Q40 default y - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS config FB_AMIGA tristate "Amiga native chipset support" @@ -440,9 +263,7 @@ config FB_AMIGA_AGA config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -478,9 +299,7 @@ config FB_OF depends on FB && PPC && (!PPC_PSERIES || PCI) depends on !DRM_OFDRM select APERTURE_HELPERS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics @@ -500,9 +319,7 @@ config FB_CONTROL config FB_PLATINUM bool "Apple \"platinum\" display support" depends on (FB = y) && PPC_PMAC && PPC32 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics @@ -511,9 +328,7 @@ config FB_PLATINUM config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics @@ -522,9 +337,7 @@ config FB_VALKYRIE config FB_CT65550 bool "Chips 65550 display support" depends on (FB = y) && PPC32 && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help This is the frame buffer device driver for the Chips & Technologies @@ -533,9 +346,7 @@ config FB_CT65550 config FB_ASILIANT bool "Asiliant (Chips) 69000 display support" depends on (FB = y) && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help This is the frame buffer device driver for the Asiliant 69030 chipset @@ -588,9 +399,7 @@ config FB_STI config FB_MAC bool "Generic Macintosh display support" depends on (FB = y) && MAC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MACMODES config FB_HP300 @@ -627,9 +436,7 @@ config FB_UVESA tristate "Userspace VESA VGA graphics support" depends on FB && CONNECTOR depends on !UML - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MODE_HELPERS help This is the frame buffer driver for generic VBE 2.0 compliant @@ -646,9 +453,7 @@ config FB_VESA bool "VESA VGA graphics support" depends on (FB = y) && X86 select APERTURE_HELPERS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select SYSFB help This is the frame buffer device driver for generic VESA 2.0 @@ -661,9 +466,7 @@ config FB_EFI depends on (FB = y) && !IA64 && EFI select APERTURE_HELPERS select DRM_PANEL_ORIENTATION_QUIRKS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select SYSFB help This is the EFI frame buffer device driver. If the firmware on @@ -673,11 +476,6 @@ config FB_EFI config FB_N411 tristate "N411 Apollo/Hecuba devkit support" depends on FB && X86 && MMU - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_SYS_FOPS - select FB_DEFERRED_IO select FB_HECUBA help This enables support for the Apollo display controller in its @@ -813,9 +611,7 @@ config FB_XVR500 config FB_XVR2500 bool "Sun XVR-2500 3DLABS Wildcat support" depends on (FB = y) && PCI && SPARC64 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help This is the framebuffer device for the Sun XVR-2500 and similar @@ -827,9 +623,7 @@ config FB_XVR2500 config FB_XVR1000 bool "Sun XVR-1000 support" depends on (FB = y) && SPARC64 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help This is the framebuffer device for the Sun XVR-1000 and similar graphics cards. The driver only works on sparc64 systems where @@ -862,9 +656,7 @@ config FB_PVR2 config FB_OPENCORES tristate "OpenCores VGA/LCD core 2.0 framebuffer support" depends on FB && HAS_DMA - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help This enables support for the OpenCores VGA/LCD core. @@ -891,9 +683,7 @@ config FB_ATMEL depends on FB && OF && HAVE_CLK && HAS_IOMEM depends on HAVE_FB_ATMEL || COMPILE_TEST select FB_BACKLIGHT - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS help @@ -997,10 +787,8 @@ config FB_RIVA_BACKLIGHT config FB_I740 tristate "Intel740 support" depends on FB && PCI + select FB_IOMEM_HELPERS select FB_MODE_HELPERS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT select VGASTATE select VIDEO_NOMODESET select FB_DDC @@ -1278,10 +1066,8 @@ config FB_RADEON_DEBUG config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT select FB_BACKLIGHT if FB_ATY128_BACKLIGHT + select FB_IOMEM_HELPERS select FB_MACMODES if PPC_PMAC select VIDEO_NOMODESET help @@ -1500,9 +1286,7 @@ config FB_NEOMAGIC config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based @@ -1545,9 +1329,8 @@ config FB_3DFX_I2C config FB_VOODOO1 tristate "3Dfx Voodoo Graphics (sst1) support" depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + depends on FB_DEVICE + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or @@ -1630,9 +1413,7 @@ config FB_PM3 config FB_CARMINE tristate "Fujitsu carmine frame buffer support" depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help This is the frame buffer device driver for the Fujitsu Carmine chip. @@ -1724,9 +1505,7 @@ config FB_HIT config FB_PMAG_AA tristate "PMAG-AA TURBOchannel framebuffer support" depends on FB && TC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) used mainly in the MIPS-based DECstation series. @@ -1734,9 +1513,7 @@ config FB_PMAG_AA config FB_PMAG_BA tristate "PMAG-BA TURBOchannel framebuffer support" depends on FB && TC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) used mainly in the MIPS-based DECstation series. @@ -1744,9 +1521,7 @@ config FB_PMAG_BA config FB_PMAGB_B tristate "PMAGB-B TURBOchannel framebuffer support" depends on FB && TC - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Support for the PMAGB-B TURBOchannel framebuffer card used mainly in the MIPS-based DECstation series. The card is currently only @@ -1755,9 +1530,7 @@ config FB_PMAGB_B config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer support" depends on (FB = y) && MACH_DECSTATION - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Support for the onboard framebuffer (1024x768x8) in the Personal DECstation series (Personal DECstation 5000/20, /25, /33, /50, @@ -1766,9 +1539,7 @@ config FB_MAXINE config FB_G364 bool "G364 frame buffer support" depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help The G364 driver is the framebuffer used in MIPS Magnum 4000 and Olivetti M700-10 systems. @@ -1787,9 +1558,7 @@ config FB_PXA168 tristate "PXA168/910 LCD framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM depends on CPU_PXA168 || CPU_PXA910 || COMPILE_TEST - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Frame buffer driver for the built-in LCD controller in the Marvell MMP processor. @@ -1797,9 +1566,7 @@ config FB_PXA168 config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEOMODE_HELPERS if OF select FB_MODE_HELPERS if OF help @@ -1850,10 +1617,8 @@ config PXA3XX_GCU config FB_FSL_DIU tristate "Freescale DIU framebuffer support" depends on FB && FSL_SOC + select FB_IOMEM_HELPERS select FB_MODE_HELPERS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT select PPC_LIB_RHEAP help Framebuffer driver for the Freescale SoC DIU @@ -1862,6 +1627,7 @@ config FB_SH_MOBILE_LCDC tristate "SuperH Mobile LCDC framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM depends on SUPERH || ARCH_RENESAS || COMPILE_TEST + depends on FB_DEVICE select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT @@ -1875,9 +1641,7 @@ config FB_S3C tristate "Samsung S3C framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_S3C64XX || COMPILE_TEST - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Frame buffer driver for the built-in FB controller in the Samsung SoC line such as the S3C6400 and S3C6410. @@ -1930,6 +1694,7 @@ config FB_SMSCUFX config FB_UDL tristate "Displaylink USB Framebuffer support" depends on FB && USB + depends on FB_DEVICE select FB_MODE_HELPERS select FB_SYS_FILLRECT select FB_SYS_COPYAREA @@ -1945,9 +1710,7 @@ config FB_UDL config FB_IBM_GXT4500 tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors" depends on FB - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help Say Y here to enable support for the IBM GXT4000P/6000P and @@ -1979,9 +1742,7 @@ config FB_PS3_DEFAULT_SIZE_M config FB_XILINX tristate "Xilinx frame buffer support" depends on FB && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Include support for the Xilinx ML300/ML403 reference design framebuffer. ML300 carries a 640*480 LCD display on the board, @@ -1991,9 +1752,7 @@ config FB_GOLDFISH tristate "Goldfish Framebuffer" depends on FB depends on GOLDFISH || COMPILE_TEST - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Framebuffer driver for Goldfish Virtual Platform @@ -2005,9 +1764,7 @@ config FB_SH7760 bool "SH7760/SH7763/SH7720/SH7721 LCDC support" depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \ || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Support for the SH7760/SH7763/SH7720/SH7721 integrated (D)STN/TFT LCD Controller. @@ -2020,10 +1777,8 @@ config FB_DA8XX tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support" depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_DAVINCI_DA8XX || SOC_AM33XX || COMPILE_TEST - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT select FB_CFB_REV_PIXELS_IN_BYTE + select FB_IOMEM_HELPERS select FB_MODE_HELPERS select VIDEOMODE_HELPERS help @@ -2057,11 +1812,7 @@ config FB_VIRTUAL config XEN_FBDEV_FRONTEND tristate "Xen virtual frame buffer support" depends on FB && XEN - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_SYS_FOPS - select FB_DEFERRED_IO + select FB_SYSMEM_HELPERS_DEFERRED select XEN_XENBUS_FRONTEND default y help @@ -2072,11 +1823,7 @@ config XEN_FBDEV_FRONTEND config FB_METRONOME tristate "E-Ink Metronome/8track controller support" depends on FB - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_SYS_FOPS - select FB_DEFERRED_IO + select FB_SYSMEM_HELPERS_DEFERRED help This driver implements support for the E-Ink Metronome controller. The pre-release name for this device was 8track @@ -2086,9 +1833,7 @@ config FB_MB862XX tristate "Fujitsu MB862xx GDC support" depends on FB depends on PCI || (OF && PPC) - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS select VIDEO_NOMODESET help Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. @@ -2146,9 +1891,7 @@ config FB_MX3 tristate "MX3 Framebuffer support" depends on FB && MX3_IPU select BACKLIGHT_CLASS_DEVICE - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS default y help This is a framebuffer device for the i.MX31 LCD Controller. So @@ -2158,11 +1901,7 @@ config FB_MX3 config FB_BROADSHEET tristate "E-Ink Broadsheet/Epson S1D13521 controller support" depends on FB && (ARCH_PXA || COMPILE_TEST) - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_SYS_FOPS - select FB_DEFERRED_IO + select FB_SYSMEM_HELPERS_DEFERRED help This driver implements support for the E-Ink Broadsheet controller. The release name for this device was Epson S1D13521 @@ -2186,9 +1925,7 @@ config FB_SIMPLE depends on FB depends on !DRM_SIMPLEDRM select APERTURE_HELPERS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_IOMEM_HELPERS help Say Y if you want support for a simple frame-buffer. @@ -2203,12 +1940,8 @@ config FB_SSD1307 tristate "Solomon SSD1307 framebuffer support" depends on FB && I2C depends on GPIOLIB || COMPILE_TEST - select FB_SYS_FOPS - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_DEFERRED_IO select FB_BACKLIGHT + select FB_SYSMEM_HELPERS_DEFERRED help This driver implements support for the Solomon SSD1307 OLED controller over I2C. @@ -2231,3 +1964,5 @@ config FB_SM712 source "drivers/video/fbdev/omap/Kconfig" source "drivers/video/fbdev/omap2/Kconfig" source "drivers/video/fbdev/mmp/Kconfig" + +source "drivers/video/fbdev/core/Kconfig" |