diff options
Diffstat (limited to 'drivers/usb/phy/phy-msm-usb.c')
| -rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 178 |
1 files changed, 177 insertions, 1 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 72b387d592c2..8a34759727bb 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/device.h> +#include <linux/extcon.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/clk.h> @@ -35,6 +36,8 @@ #include <linux/of_device.h> #include <linux/reboot.h> #include <linux/reset.h> +#include <linux/types.h> +#include <linux/usb/otg.h> #include <linux/usb.h> #include <linux/usb/otg.h> @@ -42,10 +45,183 @@ #include <linux/usb/ulpi.h> #include <linux/usb/gadget.h> #include <linux/usb/hcd.h> -#include <linux/usb/msm_hsusb.h> #include <linux/usb/msm_hsusb_hw.h> #include <linux/regulator/consumer.h> +/** + * OTG control + * + * OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host + * only configuration. + * OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY. + * OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware. + * OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs. + * + */ +enum otg_control_type { + OTG_NO_CONTROL = 0, + OTG_PHY_CONTROL, + OTG_PMIC_CONTROL, + OTG_USER_CONTROL, +}; + +/** + * PHY used in + * + * INVALID_PHY Unsupported PHY + * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY + * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY + * + */ +enum msm_usb_phy_type { + INVALID_PHY = 0, + CI_45NM_INTEGRATED_PHY, + SNPS_28NM_INTEGRATED_PHY, +}; + +#define IDEV_CHG_MAX 1500 +#define IUNIT 100 + +/** + * Different states involved in USB charger detection. + * + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + * + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +/** + * USB charger types + * + * USB_INVALID_CHARGER Invalid USB charger. + * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port + * on USB2.0 compliant host/hub. + * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger). + * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and + * IDEV_CHG_MAX can be drawn irrespective of USB state. + * + */ +enum usb_chg_type { + USB_INVALID_CHARGER = 0, + USB_SDP_CHARGER, + USB_DCP_CHARGER, + USB_CDP_CHARGER, +}; + +/** + * struct msm_otg_platform_data - platform device data + * for msm_otg driver. + * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as + * "do not overwrite default vaule at this address". + * @phy_init_sz: PHY configuration sequence size. + * @vbus_power: VBUS power on/off routine. + * @power_budget: VBUS power budget in mA (0 will be treated as 500mA). + * @mode: Supported mode (OTG/peripheral/host). + * @otg_control: OTG switch controlled by user/Id pin + */ +struct msm_otg_platform_data { + int *phy_init_seq; + int phy_init_sz; + void (*vbus_power)(bool on); + unsigned power_budget; + enum usb_dr_mode mode; + enum otg_control_type otg_control; + enum msm_usb_phy_type phy_type; + void (*setup_gpio)(enum usb_otg_state state); +}; + +/** + * struct msm_usb_cable - structure for exteternal connector cable + * state tracking + * @nb: hold event notification callback + * @conn: used for notification registration + */ +struct msm_usb_cable { + struct notifier_block nb; + struct extcon_dev *extcon; +}; + +/** + * struct msm_otg: OTG driver data. Shared by HCD and DCD. + * @otg: USB OTG Transceiver structure. + * @pdata: otg device platform data. + * @irq: IRQ number assigned for HSUSB controller. + * @clk: clock struct of usb_hs_clk. + * @pclk: clock struct of usb_hs_pclk. + * @core_clk: clock struct of usb_hs_core_clk. + * @regs: ioremapped register base address. + * @inputs: OTG state machine inputs(Id, SessValid etc). + * @sm_work: OTG state machine work. + * @in_lpm: indicates low power mode (LPM) state. + * @async_int: Async interrupt arrived. + * @cur_power: The amount of mA available from downstream port. + * @chg_work: Charger detection work. + * @chg_state: The state of charger detection process. + * @chg_type: The type of charger attached. + * @dcd_retires: The retry count used to track Data contact + * detection process. + * @manual_pullup: true if VBUS is not routed to USB controller/phy + * and controller driver therefore enables pull-up explicitly before + * starting controller using usbcmd run/stop bit. + * @vbus: VBUS signal state trakining, using extcon framework + * @id: ID signal state trakining, using extcon framework + * @switch_gpio: Descriptor for GPIO used to control external Dual + * SPDT USB Switch. + * @reboot: Used to inform the driver to route USB D+/D- line to Device + * connector + */ +struct msm_otg { + struct usb_phy phy; + struct msm_otg_platform_data *pdata; + int irq; + struct clk *clk; + struct clk *pclk; + struct clk *core_clk; + void __iomem *regs; +#define ID 0 +#define B_SESS_VLD 1 + unsigned long inputs; + struct work_struct sm_work; + atomic_t in_lpm; + int async_int; + unsigned cur_power; + int phy_number; + struct delayed_work chg_work; + enum usb_chg_state chg_state; + enum usb_chg_type chg_type; + u8 dcd_retries; + struct regulator *v3p3; + struct regulator *v1p8; + struct regulator *vddcx; + + struct reset_control *phy_rst; + struct reset_control *link_rst; + int vdd_levels[3]; + + bool manual_pullup; + + struct msm_usb_cable vbus; + struct msm_usb_cable id; + + struct gpio_desc *switch_gpio; + struct notifier_block reboot; +}; + #define MSM_USB_BASE (motg->regs) #define DRIVER_NAME "msm_otg" |