diff options
Diffstat (limited to 'drivers/usb/media/Kconfig')
| -rw-r--r-- | drivers/usb/media/Kconfig | 226 |
1 files changed, 0 insertions, 226 deletions
diff --git a/drivers/usb/media/Kconfig b/drivers/usb/media/Kconfig deleted file mode 100644 index 0d3d2cc5d7be..000000000000 --- a/drivers/usb/media/Kconfig +++ /dev/null @@ -1,226 +0,0 @@ -# -# USB Multimedia device configuration -# -comment "USB Multimedia devices" - depends on USB - -config USB_DABUSB - tristate "DABUSB driver" - depends on USB - ---help--- - A Digital Audio Broadcasting (DAB) Receiver for USB and Linux - brought to you by the DAB-Team - <http://wwwbode.cs.tum.edu/Par/arch/dab/>. This driver can be taken - as an example for URB-based bulk, control, and isochronous - transactions. URB's are explained in - <file:Documentation/usb/URB.txt>. - - To compile this driver as a module, choose M here: the - module will be called dabusb. - -comment "Video4Linux support is needed for USB Multimedia device support" - depends on USB && VIDEO_DEV=n - -config USB_VICAM - tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" - depends on USB && VIDEO_DEV && EXPERIMENTAL - ---help--- - Say Y here if you have 3com homeconnect camera (vicam). - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Multimedia Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called vicam. - -config USB_DSBR - tristate "D-Link USB FM radio support (EXPERIMENTAL)" - depends on USB && VIDEO_DEV && EXPERIMENTAL - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - This driver uses the Video For Linux API. You must enable - (Y or M in config) Video For Linux (under Character Devices) - to use this driver. Information on this API and pointers to - "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - -config USB_ET61X251 - tristate "USB ET61X[12]51 PC Camera Controller support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for cameras based on Etoms ET61X151 - or ET61X251 PC Camera Controllers. - - See <file:Documentation/usb/et61x251.txt> for more informations. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. - - To compile this driver as a module, choose M here: the - module will be called et61x251. - -config USB_IBMCAM - tristate "USB IBM (Xirlink) C-it Camera support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want to connect a IBM "C-It" camera, also known as - "Xirlink PC Camera" to your computer's USB port. For more - information, read <file:Documentation/usb/ibmcam.txt>. - - This driver uses the Video For Linux API. You must enable - (Y or M in config) Video For Linux (under Character Devices) - to use this driver. Information on this API and pointers to - "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called ibmcam. - - This camera has several configuration options which - can be specified when you load the module. Read - <file:Documentation/usb/ibmcam.txt> to learn more. - -config USB_KONICAWC - tristate "USB Konica Webcam support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for webcams based on a Konica - chipset. This is known to work with the Intel YC76 webcam. - - This driver uses the Video For Linux API. You must enable - (Y or M in config) Video For Linux (under Character Devices) - to use this driver. Information on this API and pointers to - "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called konicawc. - -config USB_OV511 - tristate "USB OV511 Camera support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want to connect this type of camera to your - computer's USB port. See <file:Documentation/usb/ov511.txt> for more - information and for a list of supported cameras. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Character Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called ov511. - -config USB_SE401 - tristate "USB SE401 Camera support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want to connect this type of camera to your - computer's USB port. See <file:Documentation/usb/se401.txt> for more - information and for a list of supported cameras. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Multimedia Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called se401. - -config USB_SN9C102 - tristate "USB SN9C10x PC Camera Controller support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want support for cameras based on SONiX SN9C101, - SN9C102 or SN9C103 PC Camera Controllers. - - See <file:Documentation/usb/sn9c102.txt> for more informations. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. - - To compile this driver as a module, choose M here: the - module will be called sn9c102. - -config USB_STV680 - tristate "USB STV680 (Pencam) Camera support" - depends on USB && VIDEO_DEV - ---help--- - Say Y here if you want to connect this type of camera to your - computer's USB port. This includes the Pencam line of cameras. - See <file:Documentation/usb/stv680.txt> for more information and for - a list of supported cameras. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Multimedia Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called stv680. - -config USB_W9968CF - tristate "USB W996[87]CF JPEG Dual Mode Camera support" - depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP - ---help--- - Say Y here if you want support for cameras based on OV681 or - Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. - - This driver has an optional plugin, which is distributed as a - separate module only (released under GPL). It allows to use higher - resolutions and framerates, but cannot be included in the official - Linux kernel for performance purposes. - - See <file:Documentation/usb/w9968cf.txt> for more informations. - - This driver uses the Video For Linux and the I2C APIs. It needs the - OmniVision Camera Chip support as well. You must say Y or M to - "Video For Linux", "I2C Support" and "OmniVision Camera Chip - support" to use this driver. - - To compile this driver as a module, choose M here: the - module will be called w9968cf. - -config USB_PWC - tristate "USB Philips Cameras" - depends on USB && VIDEO_DEV - ---help--- - Say Y or M here if you want to use one of these Philips & OEM - webcams: - * Philips PCA645, PCA646 - * Philips PCVC675, PCVC680, PCVC690 - * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 - * Askey VC010 - * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' - and 'Orbit'/'Sphere' - * Samsung MPC-C10, MPC-C30 - * Creative Webcam 5, Pro Ex - * SOTEC Afina Eye - * Visionite VCS-UC300, VCS-UM100 - - The PCA635, PCVC665 and PCVC720/20 are not supported by this driver - and never will be, but the 665 and 720/20 are supported by other - drivers. - - See <file:Documentation/usb/philips.txt> for more information and - installation instructions. - - The built-in microphone is enabled by selecting USB Audio support. - - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" (under Character Devices) to use this driver. - Information on this API and pointers to "v4l" programs may be found - at <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called pwc. |