diff options
Diffstat (limited to 'drivers/usb/host/ohci-hcd.c')
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 104 |
1 files changed, 70 insertions, 34 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 94d8cf4b36c1..b28a9b602066 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -88,7 +88,7 @@ #include <linux/timer.h> #include <linux/list.h> #include <linux/usb.h> -#include <linux/usb_otg.h> +#include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/reboot.h> @@ -101,7 +101,7 @@ #include "../core/hcd.h" -#define DRIVER_VERSION "2005 April 22" +#define DRIVER_VERSION "2006 August 04" #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell" #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver" @@ -110,9 +110,10 @@ #undef OHCI_VERBOSE_DEBUG /* not always helpful */ /* For initializing controller (mask in an HCFS mode too) */ -#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR +#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define OHCI_INTR_INIT \ - (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH) + (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \ + | OHCI_INTR_RD | OHCI_INTR_WDH) #ifdef __hppa__ /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ @@ -128,12 +129,13 @@ static const char hcd_name [] = "ohci_hcd"; +#define STATECHANGE_DELAY msecs_to_jiffies(300) + #include "ohci.h" static void ohci_dump (struct ohci_hcd *ohci, int verbose); static int ohci_init (struct ohci_hcd *ohci); static void ohci_stop (struct usb_hcd *hcd); -static int ohci_reboot (struct notifier_block *, unsigned long , void *); #include "ohci-hub.c" #include "ohci-dbg.c" @@ -259,7 +261,7 @@ static int ohci_urb_enqueue ( if (urb->status != -EINPROGRESS) { spin_unlock (&urb->lock); urb->hcpriv = urb_priv; - finish_urb (ohci, urb, NULL); + finish_urb (ohci, urb); retval = 0; goto fail; } @@ -335,7 +337,7 @@ static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) * any more ... just clean up every urb's memory. */ if (urb->hcpriv) - finish_urb (ohci, urb, NULL); + finish_urb (ohci, urb); } spin_unlock_irqrestore (&ohci->lock, flags); return 0; @@ -367,7 +369,7 @@ rescan: if (!HC_IS_RUNNING (hcd->state)) { sanitize: ed->state = ED_IDLE; - finish_unlinks (ohci, 0, NULL); + finish_unlinks (ohci, 0); } switch (ed->state) { @@ -416,21 +418,20 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); } -/* reboot notifier forcibly disables IRQs and DMA, helping kexec and +/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static int -ohci_reboot (struct notifier_block *block, unsigned long code, void *null) +static void +ohci_shutdown (struct usb_hcd *hcd) { struct ohci_hcd *ohci; - ohci = container_of (block, struct ohci_hcd, reboot_notifier); + ohci = hcd_to_ohci (hcd); ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); ohci_usb_reset (ohci); /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); - return 0; } /*-------------------------------------------------------------------------* @@ -446,7 +447,6 @@ static int ohci_init (struct ohci_hcd *ohci) disable (ohci); ohci->regs = hcd->regs; - ohci->next_statechange = jiffies; /* REVISIT this BIOS handshake is now moved into PCI "quirks", and * was never needed for most non-PCI systems ... remove the code? @@ -502,7 +502,6 @@ static int ohci_init (struct ohci_hcd *ohci) if ((ret = ohci_mem_init (ohci)) < 0) ohci_stop (hcd); else { - register_reboot_notifier (&ohci->reboot_notifier); create_debug_files (ohci); } @@ -637,10 +636,14 @@ retry: return -EOVERFLOW; } - /* start controller operations */ + /* use rhsc irqs after khubd is fully initialized */ + hcd->poll_rh = 1; + hcd->uses_new_polling = 1; + + /* start controller operations */ ohci->hc_control &= OHCI_CTRL_RWC; - ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER; - ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); + ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER; + ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); hcd->state = HC_STATE_RUNNING; /* wake on ConnectStatusChange, matching external hubs */ @@ -648,7 +651,7 @@ retry: /* Choose the interrupts we care about now, others later on demand */ mask = OHCI_INTR_INIT; - ohci_writel (ohci, mask, &ohci->regs->intrstatus); + ohci_writel (ohci, ~0, &ohci->regs->intrstatus); ohci_writel (ohci, mask, &ohci->regs->intrenable); /* handle root hub init quirks ... */ @@ -672,6 +675,7 @@ retry: // flush those writes (void) ohci_readl (ohci, &ohci->regs->control); + ohci->next_statechange = jiffies + STATECHANGE_DELAY; spin_unlock_irq (&ohci->lock); // POTPGT delay is bits 24-31, in 2 ms units. @@ -687,7 +691,7 @@ retry: /* an interrupt happens */ -static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) +static irqreturn_t ohci_irq (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); struct ohci_regs __iomem *regs = ohci->regs; @@ -709,7 +713,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) /* interrupt for some other device? */ } else if ((ints &= ohci_readl (ohci, ®s->intrenable)) == 0) { return IRQ_NOTMINE; - } + } if (ints & OHCI_INTR_UE) { disable (ohci); @@ -720,18 +724,45 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) ohci_usb_reset (ohci); } - if (ints & OHCI_INTR_RD) { - ohci_vdbg (ohci, "resume detect\n"); - ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus); - if (hcd->state != HC_STATE_QUIESCING) + if (ints & OHCI_INTR_RHSC) { + ohci_vdbg(ohci, "rhsc\n"); + ohci->next_statechange = jiffies + STATECHANGE_DELAY; + ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, + ®s->intrstatus); + + /* NOTE: Vendors didn't always make the same implementation + * choices for RHSC. Many followed the spec; RHSC triggers + * on an edge, like setting and maybe clearing a port status + * change bit. With others it's level-triggered, active + * until khubd clears all the port status change bits. We'll + * always disable it here and rely on polling until khubd + * re-enables it. + */ + ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); + usb_hcd_poll_rh_status(hcd); + } + + /* For connect and disconnect events, we expect the controller + * to turn on RHSC along with RD. But for remote wakeup events + * this might not happen. + */ + else if (ints & OHCI_INTR_RD) { + ohci_vdbg(ohci, "resume detect\n"); + ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus); + hcd->poll_rh = 1; + if (ohci->autostop) { + spin_lock (&ohci->lock); + ohci_rh_resume (ohci); + spin_unlock (&ohci->lock); + } else usb_hcd_resume_root_hub(hcd); } if (ints & OHCI_INTR_WDH) { if (HC_IS_RUNNING(hcd->state)) - ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrdisable); + ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrdisable); spin_lock (&ohci->lock); - dl_done_list (ohci, ptregs); + dl_done_list (ohci); spin_unlock (&ohci->lock); if (HC_IS_RUNNING(hcd->state)) ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable); @@ -744,7 +775,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) */ spin_lock (&ohci->lock); if (ohci->ed_rm_list) - finish_unlinks (ohci, ohci_frame_no(ohci), ptregs); + finish_unlinks (ohci, ohci_frame_no(ohci)); if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list && HC_IS_RUNNING(hcd->state)) ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); @@ -775,9 +806,10 @@ static void ohci_stop (struct usb_hcd *hcd) ohci_usb_reset (ohci); ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - + free_irq(hcd->irq, hcd); + hcd->irq = -1; + remove_debug_files (ohci); - unregister_reboot_notifier (&ohci->reboot_notifier); ohci_mem_cleanup (ohci); if (ohci->hcca) { dma_free_coherent (hcd->self.controller, @@ -835,7 +867,7 @@ static int ohci_restart (struct ohci_hcd *ohci) urb->status = -ESHUTDOWN; spin_unlock (&urb->lock); } - finish_unlinks (ohci, 0, NULL); + finish_unlinks (ohci, 0); spin_unlock_irq(&ohci->lock); /* paranoia, in case that didn't work: */ @@ -913,10 +945,14 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) +#ifdef CONFIG_ARCH_AT91 #include "ohci-at91.c" #endif +#ifdef CONFIG_ARCH_PNX4008 +#include "ohci-pnx4008.c" +#endif + #if !(defined(CONFIG_PCI) \ || defined(CONFIG_SA1111) \ || defined(CONFIG_ARCH_S3C2410) \ @@ -926,8 +962,8 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_ARCH_EP93XX) \ || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ - || defined (CONFIG_ARCH_AT91RM9200) \ - || defined (CONFIG_ARCH_AT91SAM9261) \ + || defined (CONFIG_ARCH_AT91) \ + || defined (CONFIG_ARCH_PNX4008) \ ) #error "missing bus glue for ohci-hcd" #endif |