diff options
Diffstat (limited to 'drivers/spi/spi-cadence-quadspi.c')
| -rw-r--r-- | drivers/spi/spi-cadence-quadspi.c | 51 |
1 files changed, 35 insertions, 16 deletions
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 7a00346ff9b9..101cc71bffa7 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -309,6 +309,9 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) { unsigned int dummy_clk; + if (!op->dummy.nbytes) + return 0; + dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); if (dtr) dummy_clk /= 2; @@ -322,7 +325,15 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE; f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE; f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; - f_pdata->dtr = op->data.dtr && op->cmd.dtr && op->addr.dtr; + + /* + * For an op to be DTR, cmd phase along with every other non-empty + * phase should have dtr field set to 1. If an op phase has zero + * nbytes, ignore its dtr field; otherwise, check its dtr field. + */ + f_pdata->dtr = op->cmd.dtr && + (!op->addr.nbytes || op->addr.dtr) && + (!op->data.nbytes || op->data.dtr); switch (op->data.buswidth) { case 0: @@ -797,19 +808,20 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, reg = cqspi_calc_rdreg(f_pdata); writel(reg, reg_base + CQSPI_REG_RD_INSTR); - if (f_pdata->dtr) { - /* - * Some flashes like the cypress Semper flash expect a 4-byte - * dummy address with the Read SR command in DTR mode, but this - * controller does not support sending address with the Read SR - * command. So, disable write completion polling on the - * controller's side. spi-nor will take care of polling the - * status register. - */ - reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL); - reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL; - writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL); - } + /* + * SPI NAND flashes require the address of the status register to be + * passed in the Read SR command. Also, some SPI NOR flashes like the + * cypress Semper flash expect a 4-byte dummy address in the Read SR + * command in DTR mode. + * + * But this controller does not support address phase in the Read SR + * command when doing auto-HW polling. So, disable write completion + * polling on the controller's side. spinand and spi-nor will take + * care of polling the status register. + */ + reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL); + reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL; + writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL); reg = readl(reg_base + CQSPI_REG_SIZE); reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; @@ -1224,8 +1236,15 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem, { bool all_true, all_false; - all_true = op->cmd.dtr && op->addr.dtr && op->dummy.dtr && - op->data.dtr; + /* + * op->dummy.dtr is required for converting nbytes into ncycles. + * Also, don't check the dtr field of the op phase having zero nbytes. + */ + all_true = op->cmd.dtr && + (!op->addr.nbytes || op->addr.dtr) && + (!op->dummy.nbytes || op->dummy.dtr) && + (!op->data.nbytes || op->data.dtr); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && !op->data.dtr; |