summaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/libata-core.c32
-rw-r--r--drivers/scsi/libata.h4
-rw-r--r--drivers/scsi/sata_sil24.c2
3 files changed, 19 insertions, 19 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 509178c3700c..196c09ff5e71 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1465,7 +1465,7 @@ static int ata_bus_probe(struct ata_port *ap)
tries[dev->devno] = 0;
break;
case -EIO:
- ata_down_sata_spd_limit(ap);
+ sata_down_spd_limit(ap);
/* fall through */
default:
tries[dev->devno]--;
@@ -1640,12 +1640,12 @@ void ata_port_disable(struct ata_port *ap)
}
/**
- * ata_down_sata_spd_limit - adjust SATA spd limit downward
+ * sata_down_spd_limit - adjust SATA spd limit downward
* @ap: Port to adjust SATA spd limit for
*
* Adjust SATA spd limit of @ap downward. Note that this
* function only adjusts the limit. The change must be applied
- * using ata_set_sata_spd().
+ * using sata_set_spd().
*
* LOCKING:
* Inherited from caller.
@@ -1653,7 +1653,7 @@ void ata_port_disable(struct ata_port *ap)
* RETURNS:
* 0 on success, negative errno on failure
*/
-int ata_down_sata_spd_limit(struct ata_port *ap)
+int sata_down_spd_limit(struct ata_port *ap)
{
u32 spd, mask;
int highbit;
@@ -1683,7 +1683,7 @@ int ata_down_sata_spd_limit(struct ata_port *ap)
return 0;
}
-static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
+static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol)
{
u32 spd, limit;
@@ -1699,7 +1699,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
}
/**
- * ata_set_sata_spd_needed - is SATA spd configuration needed
+ * sata_set_spd_needed - is SATA spd configuration needed
* @ap: Port in question
*
* Test whether the spd limit in SControl matches
@@ -1713,7 +1713,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
-int ata_set_sata_spd_needed(struct ata_port *ap)
+int sata_set_spd_needed(struct ata_port *ap)
{
u32 scontrol;
@@ -1722,11 +1722,11 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
scontrol = scr_read(ap, SCR_CONTROL);
- return __ata_set_sata_spd_needed(ap, &scontrol);
+ return __sata_set_spd_needed(ap, &scontrol);
}
/**
- * ata_set_sata_spd - set SATA spd according to spd limit
+ * sata_set_spd - set SATA spd according to spd limit
* @ap: Port to set SATA spd for
*
* Set SATA spd of @ap according to sata_spd_limit.
@@ -1738,7 +1738,7 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
* 0 if spd doesn't need to be changed, 1 if spd has been
* changed. -EOPNOTSUPP if SCR registers are inaccessible.
*/
-int ata_set_sata_spd(struct ata_port *ap)
+int sata_set_spd(struct ata_port *ap)
{
u32 scontrol;
@@ -1746,7 +1746,7 @@ int ata_set_sata_spd(struct ata_port *ap)
return -EOPNOTSUPP;
scontrol = scr_read(ap, SCR_CONTROL);
- if (!__ata_set_sata_spd_needed(ap, &scontrol))
+ if (!__sata_set_spd_needed(ap, &scontrol))
return 0;
scr_write(ap, SCR_CONTROL, scontrol);
@@ -2464,7 +2464,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
DPRINTK("ENTER\n");
- if (ata_set_sata_spd_needed(ap)) {
+ if (sata_set_spd_needed(ap)) {
/* SATA spec says nothing about how to reconfigure
* spd. To be on the safe side, turn off phy during
* reconfiguration. This works for at least ICH7 AHCI
@@ -2474,7 +2474,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
scontrol = (scontrol & 0x0f0) | 0x302;
scr_write_flush(ap, SCR_CONTROL, scontrol);
- ata_set_sata_spd(ap);
+ sata_set_spd(ap);
}
/* issue phy wake/reset */
@@ -2657,7 +2657,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
if (probeinit)
probeinit(ap);
- if (softreset && !ata_set_sata_spd_needed(ap)) {
+ if (softreset && !sata_set_spd_needed(ap)) {
rc = ata_do_reset(ap, softreset, postreset, classes);
if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
goto done;
@@ -2677,7 +2677,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
break;
}
- if (ata_down_sata_spd_limit(ap))
+ if (sata_down_spd_limit(ap))
goto done;
printk(KERN_INFO "ata%u: hardreset failed, will retry "
@@ -5113,7 +5113,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
EXPORT_SYMBOL_GPL(ata_bmdma_status);
EXPORT_SYMBOL_GPL(ata_bmdma_stop);
EXPORT_SYMBOL_GPL(ata_port_probe);
-EXPORT_SYMBOL_GPL(ata_set_sata_spd);
+EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3f8b0a863781..26975df9a3fc 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -51,8 +51,8 @@ extern void ata_port_flush_task(struct ata_port *ap);
extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen);
-extern int ata_down_sata_spd_limit(struct ata_port *ap);
-extern int ata_set_sata_spd_needed(struct ata_port *ap);
+extern int sata_down_spd_limit(struct ata_port *ap);
+extern int sata_set_spd_needed(struct ata_port *ap);
extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
int force_pio0);
extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index e9fd869140c5..8c167250f4c9 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -528,7 +528,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
u32 tmp;
/* sil24 does the right thing(tm) without any protection */
- ata_set_sata_spd(ap);
+ sata_set_spd(ap);
tout_msec = 100;
if (sata_dev_present(ap))