diff options
Diffstat (limited to 'drivers/pnp/quirks.c')
-rw-r--r-- | drivers/pnp/quirks.c | 163 |
1 files changed, 29 insertions, 134 deletions
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 7c3236690cc3..6b0cf0c2a088 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include "base.h" - static void quirk_awe32_resources(struct pnp_dev *dev) { struct pnp_port *port, *port2, *port3; @@ -31,7 +30,7 @@ static void quirk_awe32_resources(struct pnp_dev *dev) * two extra ports (at offset 0x400 and 0x800 from the one given) by * hand. */ - for ( ; res ; res = res->next ) { + for (; res; res = res->next) { port2 = pnp_alloc(sizeof(struct pnp_port)); if (!port2) return; @@ -58,18 +57,19 @@ static void quirk_cmi8330_resources(struct pnp_dev *dev) struct pnp_option *res = dev->dependent; unsigned long tmp; - for ( ; res ; res = res->next ) { + for (; res; res = res->next) { struct pnp_irq *irq; struct pnp_dma *dma; - for( irq = res->irq; irq; irq = irq->next ) { // Valid irqs are 5, 7, 10 + for (irq = res->irq; irq; irq = irq->next) { // Valid irqs are 5, 7, 10 tmp = 0x04A0; bitmap_copy(irq->map, &tmp, 16); // 0000 0100 1010 0000 } - for( dma = res->dma; dma; dma = dma->next ) // Valid 8bit dma channels are 1,3 - if( ( dma->flags & IORESOURCE_DMA_TYPE_MASK ) == IORESOURCE_DMA_8BIT ) + for (dma = res->dma; dma; dma = dma->next) // Valid 8bit dma channels are 1,3 + if ((dma->flags & IORESOURCE_DMA_TYPE_MASK) == + IORESOURCE_DMA_8BIT) dma->map = 0x000A; } printk(KERN_INFO "pnp: CMI8330 quirk - fixing interrupts and dma\n"); @@ -79,7 +79,7 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) { struct pnp_port *port; struct pnp_option *res = dev->dependent; - int changed = 0; + int changed = 0; /* * The default range on the mpu port for these devices is 0x388-0x388. @@ -87,129 +87,26 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) * auto-configured. */ - for( ; res ; res = res->next ) { + for (; res; res = res->next) { port = res->port; - if(!port) + if (!port) continue; port = port->next; - if(!port) + if (!port) continue; port = port->next; - if(!port) + if (!port) continue; - if(port->min != port->max) + if (port->min != port->max) continue; port->max += 0x70; changed = 1; } - if(changed) - printk(KERN_INFO "pnp: SB audio device quirk - increasing port range\n"); - return; -} - -static int quirk_smc_fir_enabled(struct pnp_dev *dev) -{ - unsigned long firbase; - u8 bank, high, low, chip; - - if (!pnp_port_valid(dev, 1)) - return 0; - - firbase = pnp_port_start(dev, 1); - - /* Select register bank 3 */ - bank = inb(firbase + 7); - bank &= 0xf0; - bank |= 3; - outb(bank, firbase + 7); - - high = inb(firbase + 0); - low = inb(firbase + 1); - chip = inb(firbase + 2); - - /* This corresponds to the check in smsc_ircc_present() */ - if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2)) - return 1; - - return 0; + if (changed) + printk(KERN_INFO + "pnp: SB audio device quirk - increasing port range\n"); } -static void quirk_smc_enable(struct pnp_dev *dev) -{ - struct resource fir, sir, irq; - - pnp_activate_dev(dev); - if (quirk_smc_fir_enabled(dev)) - return; - - /* - * Sometimes the BIOS claims the device is enabled, but it reports - * the wrong FIR resources or doesn't properly configure ISA or LPC - * bridges on the way to the device. - * - * HP nc6000 and nc8000/nw8000 laptops have known problems like - * this. Fortunately, they do fix things up if we auto-configure - * the device using its _PRS and _SRS methods. - */ - dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; " - "auto-configuring\n", dev->id->id, - (unsigned long) pnp_port_start(dev, 0), - (unsigned long) pnp_port_start(dev, 1)); - - pnp_disable_dev(dev); - pnp_init_resource_table(&dev->res); - pnp_auto_config_dev(dev); - pnp_activate_dev(dev); - if (quirk_smc_fir_enabled(dev)) { - dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", - (unsigned long) pnp_port_start(dev, 0), - (unsigned long) pnp_port_start(dev, 1)); - return; - } - - /* - * The Toshiba Portege 4000 _CRS reports the FIR region first, - * followed by the SIR region. The BIOS will configure the bridge, - * but only if we call _SRS with SIR first, then FIR. It also - * reports the IRQ as active high, when it is really active low. - */ - dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; " - "swapping SIR/FIR and reconfiguring\n", - (unsigned long) pnp_port_start(dev, 0), - (unsigned long) pnp_port_start(dev, 1)); - - /* - * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign - * these resources any more. - */ - fir = dev->res.port_resource[0]; - sir = dev->res.port_resource[1]; - fir.flags &= ~IORESOURCE_AUTO; - sir.flags &= ~IORESOURCE_AUTO; - - irq = dev->res.irq_resource[0]; - irq.flags &= ~IORESOURCE_AUTO; - irq.flags &= ~IORESOURCE_BITS; - irq.flags |= IORESOURCE_IRQ_LOWEDGE; - - pnp_disable_dev(dev); - dev->res.port_resource[0] = sir; - dev->res.port_resource[1] = fir; - dev->res.irq_resource[0] = irq; - pnp_activate_dev(dev); - - if (quirk_smc_fir_enabled(dev)) { - dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", - (unsigned long) pnp_port_start(dev, 0), - (unsigned long) pnp_port_start(dev, 1)); - return; - } - - dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and " - "email bjorn.helgaas@hp.com\n"); -} - - /* * PnP Quirks * Cards or devices that need some tweaking due to incomplete resource info @@ -217,21 +114,20 @@ static void quirk_smc_enable(struct pnp_dev *dev) static struct pnp_fixup pnp_fixups[] = { /* Soundblaster awe io port quirk */ - { "CTL0021", quirk_awe32_resources }, - { "CTL0022", quirk_awe32_resources }, - { "CTL0023", quirk_awe32_resources }, + {"CTL0021", quirk_awe32_resources}, + {"CTL0022", quirk_awe32_resources}, + {"CTL0023", quirk_awe32_resources}, /* CMI 8330 interrupt and dma fix */ - { "@X@0001", quirk_cmi8330_resources }, + {"@X@0001", quirk_cmi8330_resources}, /* Soundblaster audio device io port range quirk */ - { "CTL0001", quirk_sb16audio_resources }, - { "CTL0031", quirk_sb16audio_resources }, - { "CTL0041", quirk_sb16audio_resources }, - { "CTL0042", quirk_sb16audio_resources }, - { "CTL0043", quirk_sb16audio_resources }, - { "CTL0044", quirk_sb16audio_resources }, - { "CTL0045", quirk_sb16audio_resources }, - { "SMCf010", quirk_smc_enable }, - { "" } + {"CTL0001", quirk_sb16audio_resources}, + {"CTL0031", quirk_sb16audio_resources}, + {"CTL0041", quirk_sb16audio_resources}, + {"CTL0042", quirk_sb16audio_resources}, + {"CTL0043", quirk_sb16audio_resources}, + {"CTL0044", quirk_sb16audio_resources}, + {"CTL0045", quirk_sb16audio_resources}, + {""} }; void pnp_fixup_device(struct pnp_dev *dev) @@ -239,9 +135,8 @@ void pnp_fixup_device(struct pnp_dev *dev) int i = 0; while (*pnp_fixups[i].id) { - if (compare_pnp_id(dev->id,pnp_fixups[i].id)) { - pnp_dbg("Calling quirk for %s", - dev->dev.bus_id); + if (compare_pnp_id(dev->id, pnp_fixups[i].id)) { + pnp_dbg("Calling quirk for %s", dev->dev.bus_id); pnp_fixups[i].quirk_function(dev); } i++; |