diff options
Diffstat (limited to 'drivers/net/wireless')
80 files changed, 141 insertions, 141 deletions
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 57a79b0475f6..4e5c7a11f04a 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -1884,7 +1884,7 @@ static int airo_open(struct net_device *dev) { /* Make sure the card is configured. * Wireless Extensions may postpone config changes until the card * is open (to pipeline changes and speed-up card setup). If - * those changes are not yet commited, do it now - Jean II */ + * those changes are not yet committed, do it now - Jean II */ if (test_bit(FLAG_COMMIT, &ai->flags)) { disable_MAC(ai, 1); writeConfigRid(ai, 1); @@ -1992,7 +1992,7 @@ static int mpi_send_packet (struct net_device *dev) /* * Magic, the cards firmware needs a length count (2 bytes) in the host buffer * right after TXFID_HDR.The TXFID_HDR contains the status short so payloadlen - * is immediatly after it. ------------------------------------------------ + * is immediately after it. ------------------------------------------------ * |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA| * ------------------------------------------------ */ @@ -2006,7 +2006,7 @@ static int mpi_send_packet (struct net_device *dev) sizeof(wifictlhdr8023) + 2 ; /* - * Firmware automaticly puts 802 header on so + * Firmware automatically puts 802 header on so * we don't need to account for it in the length */ if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled && @@ -2531,7 +2531,7 @@ static int mpi_init_descriptors (struct airo_info *ai) /* * We are setting up three things here: * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid. - * 2) Map PCI memory for issueing commands. + * 2) Map PCI memory for issuing commands. * 3) Allocate memory (shared) to send and receive ethernet frames. */ static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci) @@ -3947,7 +3947,7 @@ static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) { if ( max_tries == -1 ) { airo_print_err(ai->dev->name, - "Max tries exceeded when issueing command"); + "Max tries exceeded when issuing command"); if (IN4500(ai, COMMAND) & COMMAND_BUSY) OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); return ERROR; @@ -4173,7 +4173,7 @@ done: } /* Note, that we are using BAP1 which is also used by transmit, so - * make sure this isnt called when a transmit is happening */ + * make sure this isn't called when a transmit is happening */ static int PC4500_writerid(struct airo_info *ai, u16 rid, const void *pBuf, int len, int lock) { @@ -4776,7 +4776,7 @@ static int proc_stats_rid_open( struct inode *inode, if (!statsLabels[i]) continue; if (j+strlen(statsLabels[i])+16>4096) { airo_print_warn(apriv->dev->name, - "Potentially disasterous buffer overflow averted!"); + "Potentially disastrous buffer overflow averted!"); break; } j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i], diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index b761fec0d721..ccc2edaaeda0 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -974,7 +974,7 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb) if (ar->rx_failover_missing <= 0) { /* * nested ar9170_rx call! - * termination is guranteed, even when the + * termination is guaranteed, even when the * combined frame also have a element with * a bad tag. */ diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index 0dbfcf79ac96..aa8d06ba1ee4 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -424,7 +424,7 @@ static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz) /* * initialize some phy regs from eeprom values in modal_header[] - * acc. to band and bandwith + * acc. to band and bandwidth */ static int ar9170_init_phy_from_eeprom(struct ar9170 *ar, bool is_2ghz, bool is_40mhz) diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h index d0a664039c87..034015397093 100644 --- a/drivers/net/wireless/ath/ath5k/ani.h +++ b/drivers/net/wireless/ath/ath5k/ani.h @@ -27,7 +27,7 @@ #define ATH5K_ANI_RSSI_THR_HIGH 40 #define ATH5K_ANI_RSSI_THR_LOW 7 -/* maximum availabe levels */ +/* maximum available levels */ #define ATH5K_ANI_MAX_FIRSTEP_LVL 2 #define ATH5K_ANI_MAX_NOISE_IMM_LVL 1 diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 4d7f21ee111c..349a5963931b 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1953,7 +1953,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) #define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3 /* We use FUDGE to make sure the next TBTT is ahead of the current TU. - * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer + * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer * configuration we need to make sure it is bigger than that. */ if (bc_tsf == -1) { @@ -1971,7 +1971,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf) intval |= AR5K_BEACON_RESET_TSF; } else if (bc_tsf > hw_tsf) { /* - * beacon received, SW merge happend but HW TSF not yet updated. + * beacon received, SW merge happened but HW TSF not yet updated. * not possible to reconfigure timers yet, but next time we * receive a beacon with the same BSSID, the hardware will * automatically update the TSF and then we need to reconfigure @@ -2651,7 +2651,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, synchronize_irq(sc->irq); stop_tasklets(sc); - /* Save ani mode and disable ANI durring + /* Save ani mode and disable ANI during * reset. If we don't we might get false * PHY error interrupts. */ ani_mode = ah->ah_sc->ani_state.ani_mode; diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 16b44ff7dd3e..a8fcc94269f7 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -51,7 +51,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, /* * Validate input * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends + * - A zero rate will put the HW into a mode where it continuously sends * noise on the channel, so it is important to avoid this. */ if (unlikely(tx_tries0 == 0)) { @@ -190,7 +190,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, /* * Validate input * - Zero retries don't make sense. - * - A zero rate will put the HW into a mode where it continously sends + * - A zero rate will put the HW into a mode where it continuously sends * noise on the channel, so it is important to avoid this. */ if (unlikely(tx_tries0 == 0)) { @@ -300,7 +300,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, /* * Rates can be 0 as long as the retry count is 0 too. * A zero rate and nonzero retry count will put the HW into a mode where - * it continously sends noise on the channel, so it is important to + * it continuously sends noise on the channel, so it is important to * avoid this. */ if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) || @@ -342,7 +342,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, \***********************/ /* - * Proccess the tx status descriptor on 5210/5211 + * Process the tx status descriptor on 5210/5211 */ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, struct ath5k_tx_status *ts) @@ -394,7 +394,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah, } /* - * Proccess a tx status descriptor on 5212 + * Process a tx status descriptor on 5212 */ static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, struct ath5k_tx_status *ts) @@ -519,7 +519,7 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, } /* - * Proccess the rx status descriptor on 5210/5211 + * Process the rx status descriptor on 5210/5211 */ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, struct ath5k_rx_status *rs) @@ -602,7 +602,7 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah, } /* - * Proccess the rx status descriptor on 5212 + * Process the rx status descriptor on 5212 */ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah, struct ath5k_desc *desc, diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index b6561f785c6e..efb672cb31e4 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -1080,7 +1080,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) * * To recreate the curves we read here the points and interpolate * later. Note that in most cases only 2 (higher and lower) curves are - * used (like RF5112) but vendors have the oportunity to include all + * used (like RF5112) but vendors have the opportunity to include all * 4 curves on eeprom. The final curve (higher power) has an extra * point for better accuracy like RF5112. */ @@ -1302,7 +1302,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) /* * Pd gain 0 is not the last pd gain * so it only has 2 pd points. - * Continue wih pd gain 1. + * Continue with pd gain 1. */ pcinfo->pwr_i[1] = (val >> 10) & 0x1f; diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index 66598a0d1df0..3c44689a700b 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -57,7 +57,7 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) *csz = (int)u8tmp; /* - * This check was put in to avoid "unplesant" consequences if + * This check was put in to avoid "unpleasant" consequences if * the bootrom has not fully initialized all PCI devices. * Sometimes the cache line size register is not set */ diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index a702817daf72..d9b3f828455a 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -472,7 +472,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) } /* - * The AR5210 uses promiscous mode to detect radar activity + * The AR5210 uses promiscuous mode to detect radar activity */ if (ah->ah_version == AR5K_AR5210 && (filter & AR5K_RX_FILTER_RADARERR)) { @@ -706,8 +706,8 @@ ath5k_check_timer_win(int a, int b, int window, int intval) * The need for this function arises from the fact that we have 4 separate * HW timer registers (TIMER0 - TIMER3), which are closely related to the * next beacon target time (NBTT), and that the HW updates these timers - * seperately based on the current TSF value. The hardware increments each - * timer by the beacon interval, when the local TSF coverted to TU is equal + * separately based on the current TSF value. The hardware increments each + * timer by the beacon interval, when the local TSF converted to TU is equal * to the value stored in the timer. * * The reception of a beacon with the same BSSID can update the local HW TSF diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 62ce2f4e8605..55441913344d 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -335,11 +335,11 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, * http://madwifi-project.org/ticket/1659 * with various measurements and diagrams * - * TODO: Deal with power drops due to probes by setting an apropriate + * TODO: Deal with power drops due to probes by setting an appropriate * tx power on the probe packets ! Make this part of the calibration process. */ -/* Initialize ah_gain durring attach */ +/* Initialize ah_gain during attach */ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) { /* Initialize the gain optimization values */ @@ -1049,7 +1049,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, \**************************/ /* - * Convertion needed for RF5110 + * Conversion needed for RF5110 */ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel) { @@ -1088,7 +1088,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, } /* - * Convertion needed for 5111 + * Conversion needed for 5111 */ static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, struct ath5k_athchan_2ghz *athchan) @@ -2201,7 +2201,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax, /* * Get the surrounding per-channel power calibration piers * for a given frequency so that we can interpolate between - * them and come up with an apropriate dataset for our current + * them and come up with an appropriate dataset for our current * channel. */ static void @@ -2618,7 +2618,7 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah) /* * Set the gain boundaries and create final Power to PDADC table * - * We can have up to 4 pd curves, we need to do a simmilar process + * We can have up to 4 pd curves, we need to do a similar process * as we do for RF5112. This time we don't have an edge_flag but we * set the gain boundaries on a separate register. */ @@ -2826,13 +2826,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, u32 target = channel->center_freq; int pdg, i; - /* Get surounding freq piers for this channel */ + /* Get surrounding freq piers for this channel */ ath5k_get_chan_pcal_surrounding_piers(ah, channel, &pcinfo_L, &pcinfo_R); /* Loop over pd gain curves on - * surounding freq piers by index */ + * surrounding freq piers by index */ for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) { /* Fill curves in reverse order @@ -2923,7 +2923,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, } /* Interpolate between curves - * of surounding freq piers to + * of surrounding freq piers to * get the final curve for this * pd gain. Re-use tmpL for interpolation * output */ @@ -2947,7 +2947,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah, /* Fill min and max power levels for this * channel by interpolating the values on - * surounding channels to complete the dataset */ + * surrounding channels to complete the dataset */ ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, (s16) pcinfo_L->freq, (s16) pcinfo_R->freq, @@ -3179,7 +3179,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* FIXME: TPC scale reduction */ - /* Get surounding channels for per-rate power table + /* Get surrounding channels for per-rate power table * calibration */ ath5k_get_rate_pcal_data(ah, channel, &rate_info); diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index e1c9abd8c879..d12b827033c1 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -132,8 +132,8 @@ * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). - * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i - * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what + * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i + * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. */ #define AR5K_BSR 0x002c /* Register Address */ @@ -283,7 +283,7 @@ */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */ #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ @@ -372,12 +372,12 @@ /* * Interrupt Mask Registers * - * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary + * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. */ #define AR5K_IMR 0x0020 /* Register Address [5210] */ #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/ #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ @@ -895,7 +895,7 @@ #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ #define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ -#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even with pending interrupts*/ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index ffcf44a4058b..106c0b06cf55 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -142,7 +142,7 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq) /** * ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios - * @ah: atheros hardware stucture + * @ah: atheros hardware structure * @chan: * * For the external AR2133/AR5133 radios, takes the MHz channel value and set diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 4a9271802991..6eadf975ae48 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3240,7 +3240,7 @@ static int ar9300_compress_decision(struct ath_hw *ah, eep = ar9003_eeprom_struct_find_by_id(reference); if (eep == NULL) { ath_dbg(common, ATH_DBG_EEPROM, - "cant find reference eeprom struct %d\n", + "can't find reference eeprom struct %d\n", reference); return -1; } diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index c41ab8c30161..62e139a30a74 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -360,7 +360,7 @@ ret: * HTC Messages are handled directly here and the obtained SKB * is freed. * - * Sevice messages (Data, WMI) passed to the corresponding + * Service messages (Data, WMI) passed to the corresponding * endpoint RX handlers, which have to free the SKB. */ void ath9k_htc_rx_msg(struct htc_target *htc_handle, diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index e83128c50f7b..9c65459be100 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -44,7 +44,7 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz) *csz = (int)u8tmp; /* - * This check was put in to avoid "unplesant" consequences if + * This check was put in to avoid "unpleasant" consequences if * the bootrom has not fully initialized all PCI devices. * Sometimes the cache line size register is not set */ diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index a3241cd089b1..4c0d36a6980f 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -792,7 +792,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; } else { - /* Set the choosen rate. No RTS for first series entry. */ + /* Set the chosen rate. No RTS for first series entry. */ ath_rc_rate_set_series(rate_table, &rates[i++], txrc, try_per_rate, rix, 0); } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 26734e53b37f..88fa7fdffd05 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -628,8 +628,8 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, (u32)ATH_AMPDU_LIMIT_MAX); /* - * h/w can accept aggregates upto 16 bit lengths (65535). - * The IE, however can hold upto 65536, which shows up here + * h/w can accept aggregates up to 16 bit lengths (65535). + * The IE, however can hold up to 65536, which shows up here * as zero. Ignore 65536 since we are constrained by hw. */ if (tid->an->maxampdu) diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index c6a5fae634a0..c01c43d8e61b 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -161,7 +161,7 @@ struct carl9170_sta_tid { * Naturally: The higher the limit, the faster the device CAN send. * However, even a slight over-commitment at the wrong time and the * hardware is doomed to send all already-queued frames at suboptimal - * rates. This in turn leads to an enourmous amount of unsuccessful + * rates. This in turn leads to an enormous amount of unsuccessful * retries => Latency goes up, whereas the throughput goes down. CRASH! */ #define CARL9170_NUM_TX_LIMIT_HARD ((AR9170_TXQ_DEPTH * 3) / 2) diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c index b6b0de600506..b6ae0e179c8d 100644 --- a/drivers/net/wireless/ath/carl9170/phy.c +++ b/drivers/net/wireless/ath/carl9170/phy.c @@ -427,7 +427,7 @@ static u32 carl9170_def_val(u32 reg, bool is_2ghz, bool is_40mhz) /* * initialize some phy regs from eeprom values in modal_header[] - * acc. to band and bandwith + * acc. to band and bandwidth */ static int carl9170_init_phy_from_eeprom(struct ar9170 *ar, bool is_2ghz, bool is_40mhz) diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c index 84866a4b8350..ec21ea9fd8d5 100644 --- a/drivers/net/wireless/ath/carl9170/rx.c +++ b/drivers/net/wireless/ath/carl9170/rx.c @@ -849,7 +849,7 @@ static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len) /* * nested carl9170_rx_stream call! * - * termination is guranteed, even when the + * termination is guaranteed, even when the * combined frame also have an element with * a bad tag. */ diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index f82c400be288..2fb53d067512 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -430,7 +430,7 @@ static void carl9170_usb_rx_complete(struct urb *urb) * The system is too slow to cope with * the enormous workload. We have simply * run out of active rx urbs and this - * unfortunatly leads to an unpredictable + * unfortunately leads to an unpredictable * device. */ diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c index 183c28281385..cc11d66f15bc 100644 --- a/drivers/net/wireless/ath/hw.c +++ b/drivers/net/wireless/ath/hw.c @@ -86,7 +86,7 @@ * IFRAME-01: 0110 * * An easy eye-inspeciton of this already should tell you that this frame - * will not pass our check. This is beacuse the bssid_mask tells the + * will not pass our check. This is because the bssid_mask tells the * hardware to only look at the second least significant bit and the * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB * as 1, which does not match 0. diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index f828f294ba89..0e1b8793c864 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -268,7 +268,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, } /* - * If a country IE has been recieved check its rule for this + * If a country IE has been received check its rule for this * channel first before enabling active scan. The passive scan * would have been enforced by the initial processing of our * custom regulatory domain. @@ -476,7 +476,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg, wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY; } else { /* - * This gets applied in the case of the absense of CRDA, + * This gets applied in the case of the absence of CRDA, * it's our own custom world regulatory domain, similar to * cfg80211's but we enable passive scanning. */ diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 46e382ed46aa..39a11e8af4fa 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -439,7 +439,7 @@ static u8 mac_reader[] = { }; struct atmel_private { - void *card; /* Bus dependent stucture varies for PCcard */ + void *card; /* Bus dependent structure varies for PCcard */ int (*present_callback)(void *); /* And callback which uses it */ char firmware_id[32]; AtmelFWType firmware_type; @@ -3895,7 +3895,7 @@ static int reset_atmel_card(struct net_device *dev) This routine is also responsible for initialising some hardware-specific fields in the atmel_private structure, - including a copy of the firmware's hostinfo stucture + including a copy of the firmware's hostinfo structure which is the route into the rest of the firmware datastructures. */ struct atmel_private *priv = netdev_priv(dev); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index c96e19da2949..05263516c113 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -99,7 +99,7 @@ static void atmel_detach(struct pcmcia_device *link) } /* Call-back function to interrogate PCMCIA-specific information - about the current existance of the card */ + about the current existence of the card */ static int card_present(void *arg) { struct pcmcia_device *link = (struct pcmcia_device *)arg; diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index bd4cb75b6ca3..229f4388f790 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -648,7 +648,7 @@ struct b43_request_fw_context { char errors[B43_NR_FWTYPES][128]; /* Temporary buffer for storing the firmware name. */ char fwname[64]; - /* A fatal error occured while requesting. Firmware reqest + /* A fatal error occurred while requesting. Firmware reqest * can not continue, as any other reqest will also fail. */ int fatal_failure; }; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 57eb5b649730..d59b0168c14a 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4010,7 +4010,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev) b43_mac_enable(dev); b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask); - /* Start maintainance work */ + /* Start maintenance work */ b43_periodic_tasks_setup(dev); b43_leds_init(dev); diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h index 8569fdd4c6be..5413c906a3e7 100644 --- a/drivers/net/wireless/b43/phy_g.h +++ b/drivers/net/wireless/b43/phy_g.h @@ -164,7 +164,7 @@ struct b43_phy_g { /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: + * Each value in the stack is laid out as follows: * bit 0-11: offset * bit 12-15: register ID * bit 16-32: value diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h index 001e841f118c..e789a89f1047 100644 --- a/drivers/net/wireless/b43/phy_n.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -703,7 +703,7 @@ #define B43_NPHY_CHAN_ESTHANG B43_PHY_N(0x21D) /* Channel estimate hang */ #define B43_NPHY_FINERX2_CGC B43_PHY_N(0x221) /* Fine RX 2 clock gate control */ #define B43_NPHY_FINERX2_CGC_DECGC 0x0008 /* Decode gated clocks */ -#define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power controll init */ +#define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power control init */ #define B43_NPHY_TXPCTL_INIT_PIDXI1 0x00FF /* Power index init 1 */ #define B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT 0 #define B43_NPHY_PAPD_EN0 B43_PHY_N(0x297) /* PAPD Enable0 TBD */ diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h index c81b2f53b0c5..23583be1ee0b 100644 --- a/drivers/net/wireless/b43legacy/b43legacy.h +++ b/drivers/net/wireless/b43legacy/b43legacy.h @@ -488,7 +488,7 @@ struct b43legacy_phy { /* Current Interference Mitigation mode */ int interfmode; /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: + * Each value in the stack is laid out as follows: * bit 0-11: offset * bit 12-15: register ID * bit 16-32: value diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 18d63f57777d..3d05dc15c6b8 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -2359,7 +2359,7 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], } -/* Translate our list of Access Points & Stations to a card independant +/* Translate our list of Access Points & Stations to a card independent * format that the Wireless Tools will understand - Jean II */ int prism2_ap_translate_scan(struct net_device *dev, struct iw_request_info *info, char *buffer) diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h index 655ceeba9612..334e2d0b8e11 100644 --- a/drivers/net/wireless/hostap/hostap_ap.h +++ b/drivers/net/wireless/hostap/hostap_ap.h @@ -114,7 +114,7 @@ struct sta_info { * has passed since last received frame from the station, a nullfunc data * frame is sent to the station. If this frame is not acknowledged and no other * frames have been received, the station will be disassociated after - * AP_DISASSOC_DELAY. Similarily, a the station will be deauthenticated after + * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with * max inactivity timer. */ #define AP_MAX_INACTIVITY_SEC (5 * 60) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 6038633ef361..12de46407c71 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1945,7 +1945,7 @@ static char * __prism2_translate_scan(local_info_t *local, } -/* Translate scan data returned from the card to a card independant +/* Translate scan data returned from the card to a card independent * format that the Wireless Tools will understand - Jean II */ static inline int prism2_translate_scan(local_info_t *local, struct iw_request_info *info, @@ -2043,7 +2043,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev, * until results are ready for various reasons. * First, managing wait queues is complex and racy * (there may be multiple simultaneous callers). - * Second, we grab some rtnetlink lock before comming + * Second, we grab some rtnetlink lock before coming * here (in dev_ioctl()). * Third, the caller can wait on the Wireless Event * - Jean II */ diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index 1c66b3c1030d..88dc6a52bdf1 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -853,7 +853,7 @@ struct local_info { struct work_struct comms_qual_update; /* RSSI to dBm adjustment (for RX descriptor fields) */ - int rssi_to_dBm; /* substract from RSSI to get approximate dBm value */ + int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */ /* BSS list / protected by local->lock */ struct list_head bss_list; diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 4b97f918daff..44307753587d 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -63,7 +63,7 @@ When data is sent to the firmware, the first TBD is used to indicate to the firmware if a Command or Data is being sent. If it is Command, all of the command information is contained within the physical address referred to by the TBD. If it is Data, the first TBD indicates the type of data packet, number -of fragments, etc. The next TBD then referrs to the actual packet location. +of fragments, etc. The next TBD then refers to the actual packet location. The Tx flow cycle is as follows: diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 160881f234cc..42c3fe37af64 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -1181,7 +1181,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv) /* * The following adds a new attribute to the sysfs representation * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/) - * used for controling the debug level. + * used for controlling the debug level. * * See the level definitions in ipw for details. */ @@ -3763,7 +3763,7 @@ static int ipw_queue_tx_init(struct ipw_priv *priv, q->txb = kmalloc(sizeof(q->txb[0]) * count, GFP_KERNEL); if (!q->txb) { - IPW_ERROR("vmalloc for auxilary BD structures failed\n"); + IPW_ERROR("vmalloc for auxiliary BD structures failed\n"); return -ENOMEM; } @@ -5581,7 +5581,7 @@ static int ipw_find_adhoc_network(struct ipw_priv *priv, return 0; } - /* Verify privacy compatability */ + /* Verify privacy compatibility */ if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) != ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) { IPW_DEBUG_MERGE("Network '%s (%pM)' excluded " @@ -5808,7 +5808,7 @@ static int ipw_best_network(struct ipw_priv *priv, return 0; } - /* Verify privacy compatability */ + /* Verify privacy compatibility */ if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) != ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) { IPW_DEBUG_ASSOC("Network '%s (%pM)' excluded " @@ -8184,7 +8184,7 @@ static void ipw_handle_promiscuous_rx(struct ipw_priv *priv, static int is_network_packet(struct ipw_priv *priv, struct libipw_hdr_4addr *header) { - /* Filter incoming packets to determine if they are targetted toward + /* Filter incoming packets to determine if they are targeted toward * this network, discarding packets coming from ourselves */ switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: /* Header: Dest. | Source | BSSID */ @@ -8340,9 +8340,9 @@ static void ipw_handle_mgmt_packet(struct ipw_priv *priv, } /* - * Main entry function for recieving a packet with 80211 headers. This + * Main entry function for receiving a packet with 80211 headers. This * should be called when ever the FW has notified us that there is a new - * skb in the recieve queue. + * skb in the receive queue. */ static void ipw_rx(struct ipw_priv *priv) { @@ -8683,7 +8683,7 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * functions defined in ipw_main to provide the HW interaction. * * The exception to this is the use of the ipw_get_ordinal() - * function used to poll the hardware vs. making unecessary calls. + * function used to poll the hardware vs. making unnecessary calls. * */ @@ -10419,7 +10419,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv, memset(&dummystats, 0, sizeof(dummystats)); - /* Filtering of fragment chains is done agains the first fragment */ + /* Filtering of fragment chains is done against the first fragment */ hdr = (void *)txb->fragments[0]->data; if (libipw_is_management(le16_to_cpu(hdr->frame_control))) { if (filter & IPW_PROM_NO_MGMT) diff --git a/drivers/net/wireless/ipw2x00/libipw_rx.c b/drivers/net/wireless/ipw2x00/libipw_rx.c index 0de1b1893220..e5ad76cd77da 100644 --- a/drivers/net/wireless/ipw2x00/libipw_rx.c +++ b/drivers/net/wireless/ipw2x00/libipw_rx.c @@ -925,7 +925,7 @@ drop_free: static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 }; /* -* Make ther structure we read from the beacon packet has +* Make the structure we read from the beacon packet to have * the right values */ static int libipw_verify_qos_info(struct libipw_qos_information_element diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index d418b647be80..1c3a8cb186bf 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -1030,7 +1030,7 @@ int iwl_legacy_apm_init(struct iwl_priv *priv) /* * Enable HAP INTA (interrupt from management bus) to * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existant bit) + * NOTE: This is no-op for 3945 (non-existent bit) */ iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); diff --git a/drivers/net/wireless/iwlegacy/iwl-fh.h b/drivers/net/wireless/iwlegacy/iwl-fh.h index 4e20c7e5c883..6e6091816e36 100644 --- a/drivers/net/wireless/iwlegacy/iwl-fh.h +++ b/drivers/net/wireless/iwlegacy/iwl-fh.h @@ -436,7 +436,7 @@ * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame - * which was transfered + * which was transferred */ struct iwl_rb_status { __le16 closed_rb_num; diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c index 60f597f796ca..353234a02c6d 100644 --- a/drivers/net/wireless/iwlegacy/iwl-scan.c +++ b/drivers/net/wireless/iwlegacy/iwl-scan.c @@ -143,7 +143,7 @@ static void iwl_legacy_do_scan_abort(struct iwl_priv *priv) IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); iwl_legacy_force_scan_end(priv); } else - IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n"); + IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); } /** diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c index 47c9da3834ea..66f0fb2bbe00 100644 --- a/drivers/net/wireless/iwlegacy/iwl-sta.c +++ b/drivers/net/wireless/iwlegacy/iwl-sta.c @@ -110,7 +110,7 @@ static int iwl_legacy_process_add_sta_resp(struct iwl_priv *priv, /* * XXX: The MAC address in the command buffer is often changed from * the original sent to the device. That is, the MAC address - * written to the command buffer often is not the same MAC adress + * written to the command buffer often is not the same MAC address * read from the command buffer when the command returns. This * issue has not yet been resolved and this debugging is left to * observe the problem. diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c index b5cb3be0eb4b..ed0148d714de 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c @@ -69,7 +69,7 @@ int iwl_alloc_isr_ict(struct iwl_priv *priv) if (!priv->_agn.ict_tbl_vir) return -ENOMEM; - /* align table to PAGE_SIZE boundry */ + /* align table to PAGE_SIZE boundary */ priv->_agn.aligned_ict_tbl_dma = ALIGN(priv->_agn.ict_tbl_dma, PAGE_SIZE); IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n", diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 6c30fa652e27..bafbe57c9602 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1040,7 +1040,7 @@ int iwl_apm_init(struct iwl_priv *priv) /* * Enable HAP INTA (interrupt from management bus) to * wake device's PCI Express link L1a -> L0s - * NOTE: This is no-op for 3945 (non-existant bit) + * NOTE: This is no-op for 3945 (non-existent bit) */ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 55b8370bc6d4..474009a244d4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -436,7 +436,7 @@ * @finished_rb_num [0:11] - Indicates the index of the current RB * in which the last frame was written to * @finished_fr_num [0:11] - Indicates the index of the RX Frame - * which was transfered + * which was transferred */ struct iwl_rb_status { __le16 closed_rb_num; diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 3a4d9e6b0421..914c77e44588 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -143,7 +143,7 @@ static void iwl_do_scan_abort(struct iwl_priv *priv) IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); iwl_force_scan_end(priv); } else - IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n"); + IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); } /** diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c index 907ac890997c..1cabcb39643f 100644 --- a/drivers/net/wireless/iwmc3200wifi/hal.c +++ b/drivers/net/wireless/iwmc3200wifi/hal.c @@ -57,7 +57,7 @@ * This is due to the fact the host talks exclusively * to the UMAC and so there needs to be a special UMAC * command for talking to the LMAC. - * This is how a wifi command is layed out: + * This is how a wifi command is laid out: * ------------------------ * | iwm_udma_out_wifi_hdr | * ------------------------ @@ -72,7 +72,7 @@ * Those commands are handled by the device's bootrom, * and are typically sent when the UMAC and the LMAC * are not yet available. - * * This is how a non-wifi command is layed out: + * * This is how a non-wifi command is laid out: * --------------------------- * | iwm_udma_out_nonwifi_hdr | * --------------------------- diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c index 3216621fc55a..be98074c0608 100644 --- a/drivers/net/wireless/iwmc3200wifi/tx.c +++ b/drivers/net/wireless/iwmc3200wifi/tx.c @@ -197,7 +197,7 @@ int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb) spin_lock(&iwm->tx_credit.lock); if (!iwm_tx_credit_ok(iwm, id, nb)) { - IWM_DBG_TX(iwm, DBG, "No credit avaliable for pool[%d]\n", id); + IWM_DBG_TX(iwm, DBG, "No credit available for pool[%d]\n", id); ret = -ENOSPC; goto out; } diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README index 60fd1afe89ac..1453eec82a99 100644 --- a/drivers/net/wireless/libertas/README +++ b/drivers/net/wireless/libertas/README @@ -70,7 +70,7 @@ rdrf These commands are used to read the MAC, BBP and RF registers from the card. These commands take one parameter that specifies the offset location that is to be read. This parameter must be specified in - hexadecimal (its possible to preceed preceding the number with a "0x"). + hexadecimal (its possible to precede preceding the number with a "0x"). Path: /sys/kernel/debug/libertas_wireless/ethX/registers/ @@ -84,7 +84,7 @@ wrrf These commands are used to write the MAC, BBP and RF registers in the card. These commands take two parameters that specify the offset location and the value that is to be written. This parameters must - be specified in hexadecimal (its possible to preceed the number + be specified in hexadecimal (its possible to precede the number with a "0x"). Usage: diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 30ef0351bfc4..5caa2ac14d61 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1350,7 +1350,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, * we remove all keys like in the WPA/WPA2 setup, * we just don't set RSN. * - * Therefore: fall-throught + * Therefore: fall-through */ case WLAN_CIPHER_SUITE_TKIP: case WLAN_CIPHER_SUITE_CCMP: diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index fc8121190d38..8712cb213f2f 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -913,7 +913,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out3; } - /* Clear any interrupt cause that happend while sending + /* Clear any interrupt cause that happened while sending * firmware/initializing card */ if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK); if_cs_enable_ints(card); diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h index 8b1417d3b71b..d2ac1dcd7e2e 100644 --- a/drivers/net/wireless/libertas/if_spi.h +++ b/drivers/net/wireless/libertas/if_spi.h @@ -66,7 +66,7 @@ #define IF_SPI_HOST_INT_CTRL_REG 0x40 /* Host interrupt controller reg */ #define IF_SPI_CARD_INT_CAUSE_REG 0x44 /* Card interrupt cause reg */ -#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */ +#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */ #define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */ #define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */ diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 56f439d58013..f4f4257a9d67 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -62,7 +62,7 @@ MODULE_PARM_DESC(fake_hw_scan, "Install fake (no-op) hw-scan handler"); * an intersection to occur but each device will still use their * respective regulatory requested domains. Subsequent radios will * use the resulting intersection. - * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We acomplish + * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We accomplish * this by using a custom beacon-capable regulatory domain for the first * radio. All other device world roam. * @HWSIM_REGTEST_CUSTOM_WORLD: Used for testing the custom world regulatory diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index b4772c1c6135..3c7877a7c31c 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -1031,7 +1031,7 @@ int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx, else buf.tsc[4] = 0x10; - /* Wait upto 100ms for tx queue to empty */ + /* Wait up to 100ms for tx queue to empty */ for (k = 100; k > 0; k--) { udelay(1000); ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index 356e6bb443a6..a946991989c6 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -465,7 +465,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, if (slot < 0) { /* - * The device supports the choosen algorithm, but the + * The device supports the chosen algorithm, but the * firmware does not provide enough key slots to store * all of them. * But encryption offload for outgoing frames is always diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 7ecc0bda57b3..6d9204fef90b 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -287,7 +287,7 @@ static void p54spi_power_on(struct p54s_priv *priv) enable_irq(gpio_to_irq(p54spi_gpio_irq)); /* - * need to wait a while before device can be accessed, the lenght + * need to wait a while before device can be accessed, the length * is just a guess */ msleep(10); diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index d44f8e20cce0..266d45bf86f5 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -113,7 +113,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes * and add WDS address information */ if (likely(((long) skb->data & 0x03) | init_wds)) { - /* get the number of bytes to add and re-allign */ + /* get the number of bytes to add and re-align */ offset = (4 - (long) skb->data) & 0x03; offset += init_wds ? 6 : 0; @@ -342,7 +342,7 @@ islpci_eth_receive(islpci_private *priv) priv->pci_map_rx_address[index], MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE); - /* update the skb structure and allign the buffer */ + /* update the skb structure and align the buffer */ skb_put(skb, size); if (offset) { /* shift the buffer allocation offset bytes to get the right frame */ diff --git a/drivers/net/wireless/rayctl.h b/drivers/net/wireless/rayctl.h index 49d9b267bc0f..d7646f299bd3 100644 --- a/drivers/net/wireless/rayctl.h +++ b/drivers/net/wireless/rayctl.h @@ -578,7 +578,7 @@ struct tx_msg { UCHAR var[1]; }; -/****** ECF Receive Control Stucture (RCS) Area at Shared RAM offset 0x0800 */ +/****** ECF Receive Control Structure (RCS) Area at Shared RAM offset 0x0800 */ /* Structures for command specific parameters (rcs.var) */ struct rx_packet_cmd { UCHAR rx_data_ptr[2]; diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 70b9abbdeb9e..8fbc5fa965e0 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -616,7 +616,7 @@ * READ_CONTROL: 0 write BBP, 1 read BBP * BUSY: ASIC is busy executing BBP commands * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks - * BBP_RW_MODE: 0 serial, 1 paralell + * BBP_RW_MODE: 0 serial, 1 parallel */ #define BBP_CSR_CFG 0x101c #define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2ee6cebb9b25..dbf74d07d947 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1518,7 +1518,7 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, if (rf->channel > 14) { /* * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). + * make it a positive value (Minimum value is -7). * However this means that values between 0 and 7 have * double meaning, and we should set a 7DBm boost flag. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index a3940d7300a4..7f10239f56a8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -484,13 +484,13 @@ struct rt2x00intf_conf { enum nl80211_iftype type; /* - * TSF sync value, this is dependant on the operation type. + * TSF sync value, this is dependent on the operation type. */ enum tsf_sync sync; /* - * The MAC and BSSID addressess are simple array of bytes, - * these arrays are little endian, so when sending the addressess + * The MAC and BSSID addresses are simple array of bytes, + * these arrays are little endian, so when sending the addresses * to the drivers, copy the it into a endian-signed variable. * * Note that all devices (except rt2500usb) have 32 bits @@ -1131,7 +1131,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue); * @drop: True to drop all pending frames. * * This function will flush the queue. After this call - * the queue is guarenteed to be empty. + * the queue is guaranteed to be empty. */ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop); diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index e7f67d5eda52..9416e36de29e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -60,7 +60,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, * Note that when NULL is passed as address we will send * 00:00:00:00:00 to the device to clear the address. * This will prevent the device being confused when it wants - * to ACK frames or consideres itself associated. + * to ACK frames or considers itself associated. */ memset(conf.mac, 0, sizeof(conf.mac)); if (mac) diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 5e9074bf2b8e..3f5688fbf3f7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -237,7 +237,7 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, } /* - * NOTE: Always count the payload as transfered, + * NOTE: Always count the payload as transferred, * even when alignment was set to zero. This is required * for determining the correct offset for the ICV data. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h index 5d6e0b83151f..063ebcce97f8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dump.h +++ b/drivers/net/wireless/rt2x00/rt2x00dump.h @@ -51,7 +51,7 @@ * [rt2x00dump header][hardware descriptor][ieee802.11 frame] * * rt2x00dump header: The description of the dumped frame, as well as - * additional information usefull for debugging. See &rt2x00dump_hdr. + * additional information useful for debugging. See &rt2x00dump_hdr. * hardware descriptor: Descriptor that was used to receive or transmit * the frame. * ieee802.11 frame: The actual frame that was received or transmitted. diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c975b0a12e95..29abfdeb0b65 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -283,7 +283,7 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) /** * While scanning, link tuning is disabled. By default * the most sensitive settings will be used to make sure - * that all beacons and probe responses will be recieved + * that all beacons and probe responses will be received * during the scan. */ if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 4b3c70eeef1f..4358051bfe1a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -546,7 +546,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, } /* - * When DMA allocation is required we should guarentee to the + * When DMA allocation is required we should guarantee to the * driver that the DMA is aligned to a 4-byte boundary. * However some drivers require L2 padding to pad the payload * rather then the header. This could be a requirement for @@ -689,7 +689,7 @@ void rt2x00queue_for_each_entry(struct data_queue *queue, spin_unlock_irqrestore(&queue->index_lock, irqflags); /* - * Start from the TX done pointer, this guarentees that we will + * Start from the TX done pointer, this guarantees that we will * send out all frames in the correct order. */ if (index_start < index_end) { @@ -883,7 +883,7 @@ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) } /* - * Check if driver supports flushing, we can only guarentee + * Check if driver supports flushing, we can only guarantee * full support for flushing if the driver is able * to cancel all pending frames (drop = true). */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 0c8b0c699679..217861f8d95f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -344,8 +344,8 @@ struct txentry_desc { * only be touched after the device has signaled it is done with it. * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting * for the signal to start sending. - * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured - * while transfering the data to the hardware. No TX status report will + * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred + * while transferring the data to the hardware. No TX status report will * be expected from the hardware. * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and * returned. It is now waiting for the status reporting before the @@ -365,7 +365,7 @@ enum queue_entry_flags { * @flags: Entry flags, see &enum queue_entry_flags. * @queue: The data queue (&struct data_queue) to which this entry belongs. * @skb: The buffer which is currently being transmitted (for TX queue), - * or used to directly recieve data in (for RX queue). + * or used to directly receive data in (for RX queue). * @entry_idx: The entry index number. * @priv_data: Private data belonging to this queue entry. The pointer * points to data specific to a particular driver and queue type. @@ -388,7 +388,7 @@ struct queue_entry { * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is * owned by the hardware then the queue is considered to be full. * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been - * transfered to the hardware. + * transferred to the hardware. * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by * the hardware and for which we need to run the txdone handler. If this * entry is not owned by the hardware the queue is considered to be empty. @@ -627,7 +627,7 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) } /** - * rt2x00queue_status_timeout - Check if a timeout occured for STATUS reports + * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports * @queue: Queue to check. */ static inline int rt2x00queue_status_timeout(struct data_queue *queue) @@ -637,7 +637,7 @@ static inline int rt2x00queue_status_timeout(struct data_queue *queue) } /** - * rt2x00queue_timeout - Check if a timeout occured for DMA transfers + * rt2x00queue_timeout - Check if a timeout occurred for DMA transfers * @queue: Queue to check. */ static inline int rt2x00queue_dma_timeout(struct data_queue *queue) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index fbe735f5b352..36f388f97d65 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -173,7 +173,7 @@ static void rt2x00usb_work_txdone_entry(struct queue_entry *entry) /* * If the transfer to hardware succeeded, it does not mean the * frame was send out correctly. It only means the frame - * was succesfully pushed to the hardware, we have no + * was successfully pushed to the hardware, we have no * way to determine the transmission status right now. * (Only indirectly by looking at the failed TX counters * in the register). diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 6aaf51fc7ad8..e11c759ac9ed 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -400,7 +400,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue); * @rt2x00dev: Pointer to &struct rt2x00_dev * * Check the health of the USB communication and determine - * if timeouts have occured. If this is the case, this function + * if timeouts have occurred. If this is the case, this function * will reset all communication to restore functionality again. */ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index bb0c781f4a1b..0d7d93e1d398 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -520,7 +520,7 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw, *because hw will nerver use hw_rate *when tcb_desc->use_driver_rate = false *so we never set highest N rate here, - *and N rate will all be controled by FW + *and N rate will all be controlled by FW *when tcb_desc->use_driver_rate = false */ if (rtlmac->ht_enable) { diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 9cd7703c2a30..5938f6ee21e4 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -395,7 +395,7 @@ static void rtl_pci_init_aspm(struct ieee80211_hw *hw) * 0 - Disable ASPM, * 1 - Enable ASPM without Clock Req, * 2 - Enable ASPM with Clock Req, - * 3 - Alwyas Enable ASPM with Clock Req, + * 3 - Always Enable ASPM with Clock Req, * 4 - Always Enable ASPM without Clock Req. * set defult to RTL8192CE:3 RTL8192E:2 * */ diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index 3336ca999dfd..d26f957981ad 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -179,7 +179,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, } /* - *If a country IE has been recieved check its rule for this + *If a country IE has been received check its rule for this *channel first before enabling active scan. The passive scan *would have been enforced by the initial processing of our *custom regulatory domain. diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index 01226f8e70f9..07db95ff9bc5 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -1555,7 +1555,7 @@ struct rtl_priv { /*************************************** - Bluetooth Co-existance Related + Bluetooth Co-existence Related ****************************************/ enum bt_ant_num { diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c index 0ade4bd617c0..81f164bc4888 100644 --- a/drivers/net/wireless/wl1251/cmd.c +++ b/drivers/net/wireless/wl1251/cmd.c @@ -104,7 +104,7 @@ int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer) * @wl: wl struct * @id: acx id * @buf: buffer for the response, including all headers, must work with dma - * @len: lenght of buf + * @len: length of buf */ int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len) { diff --git a/drivers/net/wireless/wl1251/rx.c b/drivers/net/wireless/wl1251/rx.c index c1b3b3f03da2..6af35265c900 100644 --- a/drivers/net/wireless/wl1251/rx.c +++ b/drivers/net/wireless/wl1251/rx.c @@ -179,7 +179,7 @@ static void wl1251_rx_body(struct wl1251 *wl, rx_buffer = skb_put(skb, length); wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length); - /* The actual lenght doesn't include the target's alignment */ + /* The actual length doesn't include the target's alignment */ skb->len = desc->length - PLCP_HEADER_LENGTH; fc = (u16 *)skb->data; diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c index f0aa7ab97bf7..96324336f936 100644 --- a/drivers/net/wireless/wl12xx/cmd.c +++ b/drivers/net/wireless/wl12xx/cmd.c @@ -359,7 +359,7 @@ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) * @wl: wl struct * @id: acx id * @buf: buffer for the response, including all headers, must work with dma - * @len: lenght of buf + * @len: length of buf */ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) { diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 856a8a2fff4f..8a8323896eec 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -497,7 +497,7 @@ struct conf_rx_settings { #define CONF_TX_RATE_RETRY_LIMIT 10 /* - * Rates supported for data packets when operating as AP. Note the absense + * Rates supported for data packets when operating as AP. Note the absence * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop * one. The rate dropped is not mandatory under any operating mode. */ @@ -572,7 +572,7 @@ enum conf_tx_ac { CONF_TX_AC_BK = 1, /* background */ CONF_TX_AC_VI = 2, /* video */ CONF_TX_AC_VO = 3, /* voice */ - CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ + CONF_TX_AC_CTS2SELF = 4, /* fictitious AC, follows AC_VO */ CONF_TX_AC_ANY_TID = 0x1f }; @@ -1169,7 +1169,7 @@ struct conf_memory_settings { /* * Minimum required free tx memory blocks in order to assure optimum - * performence + * performance * * Range: 0-120 */ @@ -1177,7 +1177,7 @@ struct conf_memory_settings { /* * Minimum required free rx memory blocks in order to assure optimum - * performence + * performance * * Range: 0-120 */ diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h index c1aac8292089..00c771ea70bf 100644 --- a/drivers/net/wireless/wl12xx/io.h +++ b/drivers/net/wireless/wl12xx/io.h @@ -94,7 +94,7 @@ static inline int wl1271_translate_addr(struct wl1271 *wl, int addr) * translated region. * * The translated regions occur next to each other in physical device - * memory, so just add the sizes of the preceeding address regions to + * memory, so just add the sizes of the preceding address regions to * get the offset to the new region. * * Currently, only the two first regions are addressed, and the diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 3e5befe4d03b..fc08f36fe1f5 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -290,7 +290,7 @@ static void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest, * \ \- IEEE 802.11 -/ \-------------- len --------------/ * \-struct wl3501_80211_tx_hdr--/ \-------- Ethernet Frame -------/ * - * Return = Postion in Card + * Return = Position in Card */ static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len) { @@ -1932,7 +1932,7 @@ static int wl3501_config(struct pcmcia_device *link) this->base_addr = dev->base_addr; if (!wl3501_get_flash_mac_addr(this)) { - printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n", + printk(KERN_WARNING "%s: Can't read MAC addr in flash ROM?\n", dev->name); unregister_netdev(dev); goto failed; diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c index 0597d862fbd2..e36117486c91 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c +++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c @@ -169,7 +169,7 @@ static int rf2959_init_hw(struct zd_rf *rf) { CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A }, { CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 }, /* { CR91, 0x18 }, */ - /* should solve continous CTS frame problems */ + /* should solve continuous CTS frame problems */ { CR91, 0x00 }, { CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 }, { CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 }, diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c index 9e74eb1b67d5..ba0a0ccb1fa0 100644 --- a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c +++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c @@ -353,7 +353,7 @@ static int uw2453_init_hw(struct zd_rf *rf) }; static const u32 rv[] = { - UW2453_REGWRITE(4, 0x2b), /* configure reciever gain */ + UW2453_REGWRITE(4, 0x2b), /* configure receiver gain */ UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */ UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */ UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */ |