diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500pci.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2500pci.c | 34 |
1 files changed, 23 insertions, 11 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 58277878889e..d27d7b8ba3b6 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1446,8 +1446,8 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, } } -static void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) +static inline void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, + struct rt2x00_field32 irq_field) { u32 reg; @@ -1500,8 +1500,10 @@ static void rt2500pci_tbtt_tasklet(unsigned long data) static void rt2500pci_rxdone_tasklet(unsigned long data) { struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00pci_rxdone(rt2x00dev); - rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); + if (rt2x00pci_rxdone(rt2x00dev)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); + else + rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); } static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) @@ -1685,14 +1687,14 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Detect if this device has an hardware controlled radio. */ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); + __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); /* * Check if the BBP tuning should be enabled. */ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) - __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); + __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); /* * Read the RSSI <-> dBm offset information. @@ -1956,9 +1958,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) /* * This device requires the atim queue and DMA-mapped skbs. */ - __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); - __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); - __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags); + __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); /* * Set the rssi offset. @@ -2011,6 +2013,9 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = { .tx_last_beacon = rt2500pci_tx_last_beacon, .rfkill_poll = rt2x00mac_rfkill_poll, .flush = rt2x00mac_flush, + .set_antenna = rt2x00mac_set_antenna, + .get_antenna = rt2x00mac_get_antenna, + .get_ringparam = rt2x00mac_get_ringparam, }; static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { @@ -2031,6 +2036,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .start_queue = rt2500pci_start_queue, .kick_queue = rt2500pci_kick_queue, .stop_queue = rt2500pci_stop_queue, + .flush_queue = rt2x00pci_flush_queue, .write_tx_desc = rt2500pci_write_tx_desc, .write_beacon = rt2500pci_write_beacon, .fill_rxdone = rt2500pci_fill_rxdone, @@ -2092,7 +2098,7 @@ static const struct rt2x00_ops rt2500pci_ops = { * RT2500pci module information. */ static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = { - { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) }, + { PCI_DEVICE(0x1814, 0x0201) }, { 0, } }; @@ -2103,10 +2109,16 @@ MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards"); MODULE_DEVICE_TABLE(pci, rt2500pci_device_table); MODULE_LICENSE("GPL"); +static int rt2500pci_probe(struct pci_dev *pci_dev, + const struct pci_device_id *id) +{ + return rt2x00pci_probe(pci_dev, &rt2500pci_ops); +} + static struct pci_driver rt2500pci_driver = { .name = KBUILD_MODNAME, .id_table = rt2500pci_device_table, - .probe = rt2x00pci_probe, + .probe = rt2500pci_probe, .remove = __devexit_p(rt2x00pci_remove), .suspend = rt2x00pci_suspend, .resume = rt2x00pci_resume, |