diff options
Diffstat (limited to 'drivers/net/usb/qmi_wwan.c')
| -rw-r--r-- | drivers/net/usb/qmi_wwan.c | 152 |
1 files changed, 148 insertions, 4 deletions
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 5fccc5a8153f..23e9880791fc 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -14,7 +14,9 @@ #include <linux/netdevice.h> #include <linux/ethtool.h> #include <linux/etherdevice.h> +#include <linux/if_arp.h> #include <linux/mii.h> +#include <linux/rtnetlink.h> #include <linux/usb.h> #include <linux/usb/cdc.h> #include <linux/usb/usbnet.h> @@ -48,11 +50,100 @@ struct qmi_wwan_state { struct usb_driver *subdriver; atomic_t pmcount; - unsigned long unused; + unsigned long flags; struct usb_interface *control; struct usb_interface *data; }; +enum qmi_wwan_flags { + QMI_WWAN_FLAG_RAWIP = 1 << 0, +}; + +static void qmi_wwan_netdev_setup(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct qmi_wwan_state *info = (void *)&dev->data; + + if (info->flags & QMI_WWAN_FLAG_RAWIP) { + net->header_ops = NULL; /* No header */ + net->type = ARPHRD_NONE; + net->hard_header_len = 0; + net->addr_len = 0; + net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + netdev_dbg(net, "mode: raw IP\n"); + } else if (!net->header_ops) { /* don't bother if already set */ + ether_setup(net); + netdev_dbg(net, "mode: Ethernet\n"); + } + + /* recalculate buffers after changing hard_header_len */ + usbnet_change_mtu(net, net->mtu); +} + +static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf) +{ + struct usbnet *dev = netdev_priv(to_net_dev(d)); + struct qmi_wwan_state *info = (void *)&dev->data; + + return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N'); +} + +static ssize_t raw_ip_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len) +{ + struct usbnet *dev = netdev_priv(to_net_dev(d)); + struct qmi_wwan_state *info = (void *)&dev->data; + bool enable; + int ret; + + if (strtobool(buf, &enable)) + return -EINVAL; + + /* no change? */ + if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP)) + return len; + + if (!rtnl_trylock()) + return restart_syscall(); + + /* we don't want to modify a running netdev */ + if (netif_running(dev->net)) { + netdev_err(dev->net, "Cannot change a running device\n"); + ret = -EBUSY; + goto err; + } + + /* let other drivers deny the change */ + ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net); + ret = notifier_to_errno(ret); + if (ret) { + netdev_err(dev->net, "Type change was refused\n"); + goto err; + } + + if (enable) + info->flags |= QMI_WWAN_FLAG_RAWIP; + else + info->flags &= ~QMI_WWAN_FLAG_RAWIP; + qmi_wwan_netdev_setup(dev->net); + call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net); + ret = len; +err: + rtnl_unlock(); + return ret; +} + +static DEVICE_ATTR_RW(raw_ip); + +static struct attribute *qmi_wwan_sysfs_attrs[] = { + &dev_attr_raw_ip.attr, + NULL, +}; + +static struct attribute_group qmi_wwan_sysfs_attr_group = { + .name = "qmi", + .attrs = qmi_wwan_sysfs_attrs, +}; + /* default ethernet address used by the modem */ static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3}; @@ -80,6 +171,8 @@ static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00}; */ static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb) { + struct qmi_wwan_state *info = (void *)&dev->data; + bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP; __be16 proto; /* This check is no longer done by usbnet */ @@ -94,15 +187,25 @@ static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb) proto = htons(ETH_P_IPV6); break; case 0x00: + if (rawip) + return 0; if (is_multicast_ether_addr(skb->data)) return 1; /* possibly bogus destination - rewrite just in case */ skb_reset_mac_header(skb); goto fix_dest; default: + if (rawip) + return 0; /* pass along other packets without modifications */ return 1; } + if (rawip) { + skb->dev = dev->net; /* normally set by eth_type_trans */ + skb->protocol = proto; + return 1; + } + if (skb_headroom(skb) < ETH_HLEN) return 0; skb_push(skb, ETH_HLEN); @@ -223,6 +326,20 @@ err: return rv; } +/* Send CDC SetControlLineState request, setting or clearing the DTR. + * "Required for Autoconnect and 9x30 to wake up" according to the + * GobiNet driver. The requirement has been verified on an MDM9230 + * based Sierra Wireless MC7455 + */ +static int qmi_wwan_change_dtr(struct usbnet *dev, bool on) +{ + u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber; + + return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + on ? 0x01 : 0x00, intf, NULL, 0); +} + static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) { int status = -1; @@ -257,7 +374,10 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) "bogus CDC Union: master=%u, slave=%u\n", cdc_union->bMasterInterface0, cdc_union->bSlaveInterface0); - goto err; + + /* ignore and continue... */ + cdc_union = NULL; + info->data = intf; } } @@ -280,6 +400,24 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) usb_driver_release_interface(driver, info->data); } + /* disabling remote wakeup on MDM9x30 devices has the same + * effect as clearing DTR. The device will not respond to QMI + * requests until we set DTR again. This is similar to a + * QMI_CTL SYNC request, clearing a lot of firmware state + * including the client ID allocations. + * + * Our usage model allows a session to span multiple + * open/close events, so we must prevent the firmware from + * clearing out state the clients might need. + * + * MDM9x30 is the first QMI chipset with USB3 support. Abuse + * this fact to enable the quirk. + */ + if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) { + qmi_wwan_manage_power(dev, 1); + qmi_wwan_change_dtr(dev, true); + } + /* Never use the same address on both ends of the link, even if the * buggy firmware told us to. Or, if device is assigned the well-known * buggy firmware MAC address, replace it with a random address, @@ -294,6 +432,7 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->dev_addr[0] &= 0xbf; /* clear "IP" bit */ } dev->net->netdev_ops = &qmi_wwan_netdev_ops; + dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group; err: return status; } @@ -307,6 +446,12 @@ static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) if (info->subdriver && info->subdriver->disconnect) info->subdriver->disconnect(info->control); + /* disable MDM9x30 quirk */ + if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) { + qmi_wwan_change_dtr(dev, false); + qmi_wwan_manage_power(dev, 0); + } + /* allow user to unbind using either control or data */ if (intf == info->control) other = info->data; @@ -715,8 +860,6 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */ {QMI_FIXED_INTF(0x1199, 0x9057, 8)}, {QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */ - {QMI_FIXED_INTF(0x1199, 0x9070, 8)}, /* Sierra Wireless MC74xx/EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x9070, 10)}, /* Sierra Wireless MC74xx/EM74xx */ {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx/EM74xx */ {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx/EM74xx */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ @@ -743,6 +886,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b1, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ + {QMI_FIXED_INTF(0x1e0e, 0x9001, 5)}, /* SIMCom 7230E */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ |