1 files changed, 312 insertions, 119 deletions

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 3b7c70e6c5dd..32b4bd6a5b55 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -43,6 +43,7 @@ struct phylink {
 	const struct phylink_mac_ops *mac_ops;
 	const struct phylink_pcs_ops *pcs_ops;
 	struct phylink_config *config;
+	struct phylink_pcs *pcs;
 	struct device *dev;
 	unsigned int old_link_state:1;
 
@@ -241,8 +242,10 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 	phylink_set(pl->supported, MII);
 	phylink_set(pl->supported, Pause);
 	phylink_set(pl->supported, Asym_Pause);
+	phylink_set(pl->supported, Autoneg);
 	if (s) {
 		__set_bit(s->bit, pl->supported);
+		__set_bit(s->bit, pl->link_config.lp_advertising);
 	} else {
 		phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
 			     pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
@@ -419,39 +422,102 @@ static void phylink_mac_config(struct phylink *pl,
 	pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, state);
 }
 
-static void phylink_mac_config_up(struct phylink *pl,
-				  const struct phylink_link_state *state)
-{
-	if (state->link)
-		phylink_mac_config(pl, state);
-}
-
 static void phylink_mac_pcs_an_restart(struct phylink *pl)
 {
 	if (pl->link_config.an_enabled &&
-	    phy_interface_mode_is_8023z(pl->link_config.interface)) {
+	    phy_interface_mode_is_8023z(pl->link_config.interface) &&
+	    phylink_autoneg_inband(pl->cur_link_an_mode)) {
 		if (pl->pcs_ops)
-			pl->pcs_ops->pcs_an_restart(pl->config);
+			pl->pcs_ops->pcs_an_restart(pl->pcs);
 		else
 			pl->mac_ops->mac_an_restart(pl->config);
 	}
 }
 
-static void phylink_pcs_config(struct phylink *pl, bool force_restart,
-			       const struct phylink_link_state *state)
+static void phylink_major_config(struct phylink *pl, bool restart,
+				  const struct phylink_link_state *state)
 {
-	bool restart = force_restart;
+	int err;
+
+	phylink_dbg(pl, "major config %s\n", phy_modes(state->interface));
 
-	if (pl->pcs_ops && pl->pcs_ops->pcs_config(pl->config,
-						   pl->cur_link_an_mode,
-						   state->interface,
-						   state->advertising))
-		restart = true;
+	if (pl->mac_ops->mac_prepare) {
+		err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode,
+					       state->interface);
+		if (err < 0) {
+			phylink_err(pl, "mac_prepare failed: %pe\n",
+				    ERR_PTR(err));
+			return;
+		}
+	}
 
 	phylink_mac_config(pl, state);
 
+	if (pl->pcs_ops) {
+		err = pl->pcs_ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
+					      state->interface,
+					      state->advertising,
+					      !!(pl->link_config.pause &
+						 MLO_PAUSE_AN));
+		if (err < 0)
+			phylink_err(pl, "pcs_config failed: %pe\n",
+				    ERR_PTR(err));
+		if (err > 0)
+			restart = true;
+	}
 	if (restart)
 		phylink_mac_pcs_an_restart(pl);
+
+	if (pl->mac_ops->mac_finish) {
+		err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode,
+					      state->interface);
+		if (err < 0)
+			phylink_err(pl, "mac_prepare failed: %pe\n",
+				    ERR_PTR(err));
+	}
+}
+
+/*
+ * Reconfigure for a change of inband advertisement.
+ * If we have a separate PCS, we only need to call its pcs_config() method,
+ * and then restart AN if it indicates something changed. Otherwise, we do
+ * the full MAC reconfiguration.
+ */
+static int phylink_change_inband_advert(struct phylink *pl)
+{
+	int ret;
+
+	if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
+		return 0;
+
+	if (!pl->pcs_ops) {
+		/* Legacy method */
+		phylink_mac_config(pl, &pl->link_config);
+		phylink_mac_pcs_an_restart(pl);
+		return 0;
+	}
+
+	phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__,
+		    phylink_an_mode_str(pl->cur_link_an_mode),
+		    phy_modes(pl->link_config.interface),
+		    __ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising,
+		    pl->link_config.pause);
+
+	/* Modern PCS-based method; update the advert at the PCS, and
+	 * restart negotiation if the pcs_config() helper indicates that
+	 * the programmed advertisement has changed.
+	 */
+	ret = pl->pcs_ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
+				      pl->link_config.interface,
+				      pl->link_config.advertising,
+				      !!(pl->link_config.pause & MLO_PAUSE_AN));
+	if (ret < 0)
+		return ret;
+
+	if (ret > 0)
+		phylink_mac_pcs_an_restart(pl);
+
+	return 0;
 }
 
 static void phylink_mac_pcs_get_state(struct phylink *pl,
@@ -468,7 +534,7 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
 	state->link = 1;
 
 	if (pl->pcs_ops)
-		pl->pcs_ops->pcs_get_state(pl->config, state);
+		pl->pcs_ops->pcs_get_state(pl->pcs, state);
 	else
 		pl->mac_ops->mac_pcs_get_state(pl->config, state);
 }
@@ -514,7 +580,7 @@ static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
 	link_state.link = false;
 
 	phylink_apply_manual_flow(pl, &link_state);
-	phylink_pcs_config(pl, force_restart, &link_state);
+	phylink_major_config(pl, force_restart, &link_state);
 }
 
 static const char *phylink_pause_to_str(int pause)
@@ -539,7 +605,7 @@ static void phylink_link_up(struct phylink *pl,
 	pl->cur_interface = link_state.interface;
 
 	if (pl->pcs_ops && pl->pcs_ops->pcs_link_up)
-		pl->pcs_ops->pcs_link_up(pl->config, pl->cur_link_an_mode,
+		pl->pcs_ops->pcs_link_up(pl->pcs, pl->cur_link_an_mode,
 					 pl->cur_interface,
 					 link_state.speed, link_state.duplex);
 
@@ -575,9 +641,15 @@ static void phylink_resolve(struct work_struct *w)
 	struct phylink *pl = container_of(w, struct phylink, resolve);
 	struct phylink_link_state link_state;
 	struct net_device *ndev = pl->netdev;
-	int link_changed;
+	bool mac_config = false;
+	bool cur_link_state;
 
 	mutex_lock(&pl->state_mutex);
+	if (pl->netdev)
+		cur_link_state = netif_carrier_ok(ndev);
+	else
+		cur_link_state = pl->old_link_state;
+
 	if (pl->phylink_disable_state) {
 		pl->mac_link_dropped = false;
 		link_state.link = false;
@@ -588,12 +660,12 @@ static void phylink_resolve(struct work_struct *w)
 		case MLO_AN_PHY:
 			link_state = pl->phy_state;
 			phylink_apply_manual_flow(pl, &link_state);
-			phylink_mac_config_up(pl, &link_state);
+			mac_config = link_state.link;
 			break;
 
 		case MLO_AN_FIXED:
 			phylink_get_fixed_state(pl, &link_state);
-			phylink_mac_config_up(pl, &link_state);
+			mac_config = link_state.link;
 			break;
 
 		case MLO_AN_INBAND:
@@ -611,21 +683,36 @@ static void phylink_resolve(struct work_struct *w)
 				/* If we have a PHY, we need to update with
 				 * the PHY flow control bits. */
 				link_state.pause = pl->phy_state.pause;
-				phylink_apply_manual_flow(pl, &link_state);
-				phylink_mac_config(pl, &link_state);
-			} else {
-				phylink_apply_manual_flow(pl, &link_state);
+				mac_config = true;
 			}
+			phylink_apply_manual_flow(pl, &link_state);
 			break;
 		}
 	}
 
-	if (pl->netdev)
-		link_changed = (link_state.link != netif_carrier_ok(ndev));
-	else
-		link_changed = (link_state.link != pl->old_link_state);
+	if (mac_config) {
+		if (link_state.interface != pl->link_config.interface) {
+			/* The interface has changed, force the link down and
+			 * then reconfigure.
+			 */
+			if (cur_link_state) {
+				phylink_link_down(pl);
+				cur_link_state = false;
+			}
+			phylink_major_config(pl, false, &link_state);
+			pl->link_config.interface = link_state.interface;
+		} else if (!pl->pcs_ops) {
+			/* The interface remains unchanged, only the speed,
+			 * duplex or pause settings have changed. Call the
+			 * old mac_config() method to configure the MAC/PCS
+			 * only if we do not have a PCS installed (an
+			 * unconverted user.)
+			 */
+			phylink_mac_config(pl, &link_state);
+		}
+	}
 
-	if (link_changed) {
+	if (link_state.link != cur_link_state) {
 		pl->old_link_state = link_state.link;
 		if (!link_state.link)
 			phylink_link_down(pl);
@@ -777,11 +864,26 @@ struct phylink *phylink_create(struct phylink_config *config,
 }
 EXPORT_SYMBOL_GPL(phylink_create);
 
-void phylink_add_pcs(struct phylink *pl, const struct phylink_pcs_ops *ops)
+/**
+ * phylink_set_pcs() - set the current PCS for phylink to use
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @pcs: a pointer to the &struct phylink_pcs
+ *
+ * Bind the MAC PCS to phylink.  This may be called after phylink_create(),
+ * in mac_prepare() or mac_config() methods if it is desired to dynamically
+ * change the PCS.
+ *
+ * Please note that there are behavioural changes with the mac_config()
+ * callback if a PCS is present (denoting a newer setup) so removing a PCS
+ * is not supported, and if a PCS is going to be used, it must be registered
+ * by calling phylink_set_pcs() at the latest in the first mac_config() call.
+ */
+void phylink_set_pcs(struct phylink *pl, struct phylink_pcs *pcs)
 {
-	pl->pcs_ops = ops;
+	pl->pcs = pcs;
+	pl->pcs_ops = pcs->ops;
 }
-EXPORT_SYMBOL_GPL(phylink_add_pcs);
+EXPORT_SYMBOL_GPL(phylink_set_pcs);
 
 /**
  * phylink_destroy() - cleanup and destroy the phylink instance
@@ -1126,6 +1228,8 @@ void phylink_start(struct phylink *pl)
 		break;
 	case MLO_AN_INBAND:
 		poll |= pl->config->pcs_poll;
+		if (pl->pcs)
+			poll |= pl->pcs->poll;
 		break;
 	}
 	if (poll)
@@ -1295,27 +1399,46 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 				  const struct ethtool_link_ksettings *kset)
 {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
-	struct ethtool_link_ksettings our_kset;
 	struct phylink_link_state config;
-	int ret;
+	const struct phy_setting *s;
 
 	ASSERT_RTNL();
 
-	if (kset->base.autoneg != AUTONEG_DISABLE &&
-	    kset->base.autoneg != AUTONEG_ENABLE)
-		return -EINVAL;
+	if (pl->phydev) {
+		/* We can rely on phylib for this update; we also do not need
+		 * to update the pl->link_config settings:
+		 * - the configuration returned via ksettings_get() will come
+		 *   from phylib whenever a PHY is present.
+		 * - link_config.interface will be updated by the PHY calling
+		 *   back via phylink_phy_change() and a subsequent resolve.
+		 * - initial link configuration for PHY mode comes from the
+		 *   last phy state updated via phylink_phy_change().
+		 * - other configuration changes (e.g. pause modes) are
+		 *   performed directly via phylib.
+		 * - if in in-band mode with a PHY, the link configuration
+		 *   is passed on the link from the PHY, and all of
+		 *   link_config.{speed,duplex,an_enabled,pause} are not used.
+		 * - the only possible use would be link_config.advertising
+		 *   pause modes when in 1000base-X mode with a PHY, but in
+		 *   the presence of a PHY, this should not be changed as that
+		 *   should be determined from the media side advertisement.
+		 */
+		return phy_ethtool_ksettings_set(pl->phydev, kset);
+	}
 
 	linkmode_copy(support, pl->supported);
 	config = pl->link_config;
+	config.an_enabled = kset->base.autoneg == AUTONEG_ENABLE;
 
-	/* Mask out unsupported advertisements */
+	/* Mask out unsupported advertisements, and force the autoneg bit */
 	linkmode_and(config.advertising, kset->link_modes.advertising,
 		     support);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising,
+			 config.an_enabled);
 
 	/* FIXME: should we reject autoneg if phy/mac does not support it? */
-	if (kset->base.autoneg == AUTONEG_DISABLE) {
-		const struct phy_setting *s;
-
+	switch (kset->base.autoneg) {
+	case AUTONEG_DISABLE:
 		/* Autonegotiation disabled, select a suitable speed and
 		 * duplex.
 		 */
@@ -1324,90 +1447,73 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 		if (!s)
 			return -EINVAL;
 
-		/* If we have a fixed link (as specified by firmware), refuse
-		 * to change link parameters.
+		/* If we have a fixed link, refuse to change link parameters.
+		 * If the link parameters match, accept them but do nothing.
 		 */
-		if (pl->cur_link_an_mode == MLO_AN_FIXED &&
-		    (s->speed != pl->link_config.speed ||
-		     s->duplex != pl->link_config.duplex))
-			return -EINVAL;
+		if (pl->cur_link_an_mode == MLO_AN_FIXED) {
+			if (s->speed != pl->link_config.speed ||
+			    s->duplex != pl->link_config.duplex)
+				return -EINVAL;
+			return 0;
+		}
 
 		config.speed = s->speed;
 		config.duplex = s->duplex;
-		config.an_enabled = false;
+		break;
 
-		__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
-	} else {
-		/* If we have a fixed link, refuse to enable autonegotiation */
-		if (pl->cur_link_an_mode == MLO_AN_FIXED)
-			return -EINVAL;
+	case AUTONEG_ENABLE:
+		/* If we have a fixed link, allow autonegotiation (since that
+		 * is our default case) but do not allow the advertisement to
+		 * be changed. If the advertisement matches, simply return.
+		 */
+		if (pl->cur_link_an_mode == MLO_AN_FIXED) {
+			if (!linkmode_equal(config.advertising,
+					    pl->link_config.advertising))
+				return -EINVAL;
+			return 0;
+		}
 
 		config.speed = SPEED_UNKNOWN;
 		config.duplex = DUPLEX_UNKNOWN;
-		config.an_enabled = true;
+		break;
 
-		__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
+	default:
+		return -EINVAL;
 	}
 
-	if (pl->phydev) {
-		/* If we have a PHY, we process the kset change via phylib.
-		 * phylib will call our link state function if the PHY
-		 * parameters have changed, which will trigger a resolve
-		 * and update the MAC configuration.
-		 */
-		our_kset = *kset;
-		linkmode_copy(our_kset.link_modes.advertising,
-			      config.advertising);
-		our_kset.base.speed = config.speed;
-		our_kset.base.duplex = config.duplex;
+	/* We have ruled out the case with a PHY attached, and the
+	 * fixed-link cases.  All that is left are in-band links.
+	 */
+	if (phylink_validate(pl, support, &config))
+		return -EINVAL;
 
-		ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
-		if (ret)
-			return ret;
+	/* If autonegotiation is enabled, we must have an advertisement */
+	if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
+		return -EINVAL;
 
-		mutex_lock(&pl->state_mutex);
-		/* Save the new configuration */
-		linkmode_copy(pl->link_config.advertising,
-			      our_kset.link_modes.advertising);
+	mutex_lock(&pl->state_mutex);
+	pl->link_config.speed = config.speed;
+	pl->link_config.duplex = config.duplex;
+	pl->link_config.an_enabled = config.an_enabled;
+
+	if (pl->link_config.interface != config.interface) {
+		/* The interface changed, e.g. 1000base-X <-> 2500base-X */
+		/* We need to force the link down, then change the interface */
+		if (pl->old_link_state) {
+			phylink_link_down(pl);
+			pl->old_link_state = false;
+		}
+		if (!test_bit(PHYLINK_DISABLE_STOPPED,
+			      &pl->phylink_disable_state))
+			phylink_major_config(pl, false, &config);
 		pl->link_config.interface = config.interface;
-		pl->link_config.speed = our_kset.base.speed;
-		pl->link_config.duplex = our_kset.base.duplex;
-		pl->link_config.an_enabled = our_kset.base.autoneg !=
-					     AUTONEG_DISABLE;
-		mutex_unlock(&pl->state_mutex);
-	} else {
-		/* For a fixed link, this isn't able to change any parameters,
-		 * which just leaves inband mode.
-		 */
-		if (phylink_validate(pl, support, &config))
-			return -EINVAL;
-
-		/* If autonegotiation is enabled, we must have an advertisement */
-		if (config.an_enabled &&
-		    phylink_is_empty_linkmode(config.advertising))
-			return -EINVAL;
-
-		mutex_lock(&pl->state_mutex);
 		linkmode_copy(pl->link_config.advertising, config.advertising);
-		pl->link_config.interface = config.interface;
-		pl->link_config.speed = config.speed;
-		pl->link_config.duplex = config.duplex;
-		pl->link_config.an_enabled = kset->base.autoneg !=
-					     AUTONEG_DISABLE;
-
-		if (pl->cur_link_an_mode == MLO_AN_INBAND &&
-		    !test_bit(PHYLINK_DISABLE_STOPPED,
-			      &pl->phylink_disable_state)) {
-			/* If in 802.3z mode, this updates the advertisement.
-			 *
-			 * If we are in SGMII mode without a PHY, there is no
-			 * advertisement; the only thing we have is the pause
-			 * modes which can only come from a PHY.
-			 */
-			phylink_pcs_config(pl, true, &pl->link_config);
-		}
-		mutex_unlock(&pl->state_mutex);
+	} else if (!linkmode_equal(pl->link_config.advertising,
+				   config.advertising)) {
+		linkmode_copy(pl->link_config.advertising, config.advertising);
+		phylink_change_inband_advert(pl);
 	}
+	mutex_unlock(&pl->state_mutex);
 
 	return 0;
 }
@@ -1510,9 +1616,11 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
 
 	config->pause = pause_state;
 
-	if (!pl->phydev && !test_bit(PHYLINK_DISABLE_STOPPED,
-				     &pl->phylink_disable_state))
-		phylink_pcs_config(pl, true, &pl->link_config);
+	/* Update our in-band advertisement, triggering a renegotiation if
+	 * the advertisement changed.
+	 */
+	if (!pl->phydev)
+		phylink_change_inband_advert(pl);
 
 	mutex_unlock(&pl->state_mutex);
 
@@ -1657,11 +1765,11 @@ static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
 		case MII_BMSR:
 		case MII_PHYSID1:
 		case MII_PHYSID2:
-			devad = __ffs(phydev->c45_ids.devices_in_package);
+			devad = __ffs(phydev->c45_ids.mmds_present);
 			break;
 		case MII_ADVERTISE:
 		case MII_LPA:
-			if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN))
+			if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN))
 				return -EINVAL;
 			devad = MDIO_MMD_AN;
 			if (reg == MII_ADVERTISE)
@@ -1697,11 +1805,11 @@ static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
 		case MII_BMSR:
 		case MII_PHYSID1:
 		case MII_PHYSID2:
-			devad = __ffs(phydev->c45_ids.devices_in_package);
+			devad = __ffs(phydev->c45_ids.mmds_present);
 			break;
 		case MII_ADVERTISE:
 		case MII_LPA:
-			if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN))
+			if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN))
 				return -EINVAL;
 			devad = MDIO_MMD_AN;
 			if (reg == MII_ADVERTISE)
@@ -1845,6 +1953,54 @@ int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
 }
 EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
 
+/**
+ * phylink_speed_down() - set the non-SFP PHY to lowest speed supported by both
+ *   link partners
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @sync: perform action synchronously
+ *
+ * If we have a PHY that is not part of a SFP module, then set the speed
+ * as described in the phy_speed_down() function. Please see this function
+ * for a description of the @sync parameter.
+ *
+ * Returns zero if there is no PHY, otherwise as per phy_speed_down().
+ */
+int phylink_speed_down(struct phylink *pl, bool sync)
+{
+	int ret = 0;
+
+	ASSERT_RTNL();
+
+	if (!pl->sfp_bus && pl->phydev)
+		ret = phy_speed_down(pl->phydev, sync);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_speed_down);
+
+/**
+ * phylink_speed_up() - restore the advertised speeds prior to the call to
+ *   phylink_speed_down()
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * If we have a PHY that is not part of a SFP module, then restore the
+ * PHY speeds as per phy_speed_up().
+ *
+ * Returns zero if there is no PHY, otherwise as per phy_speed_up().
+ */
+int phylink_speed_up(struct phylink *pl)
+{
+	int ret = 0;
+
+	ASSERT_RTNL();
+
+	if (!pl->sfp_bus && pl->phydev)
+		ret = phy_speed_up(pl->phydev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_speed_up);
+
 static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
 {
 	struct phylink *pl = upstream;
@@ -2287,6 +2443,43 @@ int phylink_mii_c22_pcs_set_advertisement(struct mdio_device *pcs,
 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_set_advertisement);
 
 /**
+ * phylink_mii_c22_pcs_config() - configure clause 22 PCS
+ * @pcs: a pointer to a &struct mdio_device.
+ * @mode: link autonegotiation mode
+ * @interface: the PHY interface mode being configured
+ * @advertising: the ethtool advertisement mask
+ *
+ * Configure a Clause 22 PCS PHY with the appropriate negotiation
+ * parameters for the @mode, @interface and @advertising parameters.
+ * Returns negative error number on failure, zero if the advertisement
+ * has not changed, or positive if there is a change.
+ */
+int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
+			       phy_interface_t interface,
+			       const unsigned long *advertising)
+{
+	bool changed;
+	u16 bmcr;
+	int ret;
+
+	ret = phylink_mii_c22_pcs_set_advertisement(pcs, interface,
+						    advertising);
+	if (ret < 0)
+		return ret;
+
+	changed = ret > 0;
+
+	bmcr = mode == MLO_AN_INBAND ? BMCR_ANENABLE : 0;
+	ret = mdiobus_modify(pcs->bus, pcs->addr, MII_BMCR,
+			     BMCR_ANENABLE, bmcr);
+	if (ret < 0)
+		return ret;
+
+	return changed ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_config);
+
+/**
  * phylink_mii_c22_pcs_an_restart() - restart 802.3z autonegotiation
  * @pcs: a pointer to a &struct mdio_device.
  *