diff options
Diffstat (limited to 'drivers/net/phy/at803x.c')
| -rw-r--r-- | drivers/net/phy/at803x.c | 44 |
1 files changed, 7 insertions, 37 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 656136628ffd..c1f307d90518 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -304,7 +304,6 @@ struct at803x_priv { bool is_1000basex; struct regulator_dev *vddio_rdev; struct regulator_dev *vddh_rdev; - struct regulator *vddio; u64 stats[ARRAY_SIZE(at803x_hw_stats)]; }; @@ -824,11 +823,11 @@ static int at803x_parse_dt(struct phy_device *phydev) if (ret < 0) return ret; - priv->vddio = devm_regulator_get_optional(&phydev->mdio.dev, - "vddio"); - if (IS_ERR(priv->vddio)) { + ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, + "vddio"); + if (ret) { phydev_err(phydev, "failed to get VDDIO regulator\n"); - return PTR_ERR(priv->vddio); + return ret; } /* Only AR8031/8033 support 1000Base-X for SFP modules */ @@ -856,12 +855,6 @@ static int at803x_probe(struct phy_device *phydev) if (ret) return ret; - if (priv->vddio) { - ret = regulator_enable(priv->vddio); - if (ret < 0) - return ret; - } - if (phydev->drv->phy_id == ATH8031_PHY_ID) { int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); int mode_cfg; @@ -869,10 +862,8 @@ static int at803x_probe(struct phy_device *phydev) .wolopts = 0, }; - if (ccr < 0) { - ret = ccr; - goto err; - } + if (ccr < 0) + return ccr; mode_cfg = ccr & AT803X_MODE_CFG_MASK; switch (mode_cfg) { @@ -890,25 +881,11 @@ static int at803x_probe(struct phy_device *phydev) ret = at803x_set_wol(phydev, &wol); if (ret < 0) { phydev_err(phydev, "failed to disable WOL on probe: %d\n", ret); - goto err; + return ret; } } return 0; - -err: - if (priv->vddio) - regulator_disable(priv->vddio); - - return ret; -} - -static void at803x_remove(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - - if (priv->vddio) - regulator_disable(priv->vddio); } static int at803x_get_features(struct phy_device *phydev) @@ -2021,7 +1998,6 @@ static struct phy_driver at803x_driver[] = { .name = "Qualcomm Atheros AR8035", .flags = PHY_POLL_CABLE_TEST, .probe = at803x_probe, - .remove = at803x_remove, .config_aneg = at803x_config_aneg, .config_init = at803x_config_init, .soft_reset = genphy_soft_reset, @@ -2043,7 +2019,6 @@ static struct phy_driver at803x_driver[] = { .name = "Qualcomm Atheros AR8030", .phy_id_mask = AT8030_PHY_ID_MASK, .probe = at803x_probe, - .remove = at803x_remove, .config_init = at803x_config_init, .link_change_notify = at803x_link_change_notify, .set_wol = at803x_set_wol, @@ -2059,7 +2034,6 @@ static struct phy_driver at803x_driver[] = { .name = "Qualcomm Atheros AR8031/AR8033", .flags = PHY_POLL_CABLE_TEST, .probe = at803x_probe, - .remove = at803x_remove, .config_init = at803x_config_init, .config_aneg = at803x_config_aneg, .soft_reset = genphy_soft_reset, @@ -2082,7 +2056,6 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), .name = "Qualcomm Atheros AR8032", .probe = at803x_probe, - .remove = at803x_remove, .flags = PHY_POLL_CABLE_TEST, .config_init = at803x_config_init, .link_change_notify = at803x_link_change_notify, @@ -2100,7 +2073,6 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), .name = "Qualcomm Atheros AR9331 built-in PHY", .probe = at803x_probe, - .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, @@ -2117,7 +2089,6 @@ static struct phy_driver at803x_driver[] = { PHY_ID_MATCH_EXACT(QCA9561_PHY_ID), .name = "Qualcomm Atheros QCA9561 built-in PHY", .probe = at803x_probe, - .remove = at803x_remove, .suspend = at803x_suspend, .resume = at803x_resume, .flags = PHY_POLL_CABLE_TEST, @@ -2183,7 +2154,6 @@ static struct phy_driver at803x_driver[] = { .name = "Qualcomm QCA8081", .flags = PHY_POLL_CABLE_TEST, .probe = at803x_probe, - .remove = at803x_remove, .config_intr = at803x_config_intr, .handle_interrupt = at803x_handle_interrupt, .get_tunable = at803x_get_tunable, |