diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 1386 |
1 files changed, 1383 insertions, 3 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 57d48da709fb..7ca9201f7dcb 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -1,9 +1,10 @@ /* * drivers/net/ethernet/mellanox/mlxsw/reg.h * Copyright (c) 2015 Mellanox Technologies. All rights reserved. - * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com> + * Copyright (c) 2015-2016 Ido Schimmel <idosch@mellanox.com> * Copyright (c) 2015 Elad Raz <eladr@mellanox.com> - * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com> + * Copyright (c) 2015-2016 Jiri Pirko <jiri@mellanox.com> + * Copyright (c) 2016 Yotam Gigi <yotamg@mellanox.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -386,7 +387,9 @@ enum mlxsw_reg_sfd_rec_action { /* forward and trap, trap_id is FDB_TRAP */ MLXSW_REG_SFD_REC_ACTION_MIRROR_TO_CPU = 1, /* trap and do not forward, trap_id is FDB_TRAP */ - MLXSW_REG_SFD_REC_ACTION_TRAP = 3, + MLXSW_REG_SFD_REC_ACTION_TRAP = 2, + /* forward to IP router */ + MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER = 3, MLXSW_REG_SFD_REC_ACTION_DISCARD_ERROR = 15, }; @@ -2500,6 +2503,7 @@ MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2); enum mlxsw_reg_ppcnt_grp { MLXSW_REG_PPCNT_IEEE_8023_CNT = 0x0, MLXSW_REG_PPCNT_PRIO_CNT = 0x10, + MLXSW_REG_PPCNT_TC_CNT = 0x11, }; /* reg_ppcnt_grp @@ -2700,6 +2704,23 @@ MLXSW_ITEM64(reg, ppcnt, tx_pause_duration, 0x08 + 0x68, 0, 64); */ MLXSW_ITEM64(reg, ppcnt, tx_pause_transition, 0x08 + 0x70, 0, 64); +/* Ethernet Per Traffic Group Counters */ + +/* reg_ppcnt_tc_transmit_queue + * Contains the transmit queue depth in cells of traffic class + * selected by prio_tc and the port selected by local_port. + * The field cannot be cleared. + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tc_transmit_queue, 0x08 + 0x00, 0, 64); + +/* reg_ppcnt_tc_no_buffer_discard_uc + * The number of unicast packets dropped due to lack of shared + * buffer resources. + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tc_no_buffer_discard_uc, 0x08 + 0x08, 0, 64); + static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port, enum mlxsw_reg_ppcnt_grp grp, u8 prio_tc) @@ -3201,6 +3222,1183 @@ static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action, u16 trap_id) mlxsw_reg_hpkt_ctrl_set(payload, MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT); } +/* RGCR - Router General Configuration Register + * -------------------------------------------- + * The register is used for setting up the router configuration. + */ +#define MLXSW_REG_RGCR_ID 0x8001 +#define MLXSW_REG_RGCR_LEN 0x28 + +static const struct mlxsw_reg_info mlxsw_reg_rgcr = { + .id = MLXSW_REG_RGCR_ID, + .len = MLXSW_REG_RGCR_LEN, +}; + +/* reg_rgcr_ipv4_en + * IPv4 router enable. + * Access: RW + */ +MLXSW_ITEM32(reg, rgcr, ipv4_en, 0x00, 31, 1); + +/* reg_rgcr_ipv6_en + * IPv6 router enable. + * Access: RW + */ +MLXSW_ITEM32(reg, rgcr, ipv6_en, 0x00, 30, 1); + +/* reg_rgcr_max_router_interfaces + * Defines the maximum number of active router interfaces for all virtual + * routers. + * Access: RW + */ +MLXSW_ITEM32(reg, rgcr, max_router_interfaces, 0x10, 0, 16); + +/* reg_rgcr_usp + * Update switch priority and packet color. + * 0 - Preserve the value of Switch Priority and packet color. + * 1 - Recalculate the value of Switch Priority and packet color. + * Access: RW + * + * Note: Not supported by SwitchX and SwitchX-2. + */ +MLXSW_ITEM32(reg, rgcr, usp, 0x18, 20, 1); + +/* reg_rgcr_pcp_rw + * Indicates how to handle the pcp_rewrite_en value: + * 0 - Preserve the value of pcp_rewrite_en. + * 2 - Disable PCP rewrite. + * 3 - Enable PCP rewrite. + * Access: RW + * + * Note: Not supported by SwitchX and SwitchX-2. + */ +MLXSW_ITEM32(reg, rgcr, pcp_rw, 0x18, 16, 2); + +/* reg_rgcr_activity_dis + * Activity disable: + * 0 - Activity will be set when an entry is hit (default). + * 1 - Activity will not be set when an entry is hit. + * + * Bit 0 - Disable activity bit in Router Algorithmic LPM Unicast Entry + * (RALUE). + * Bit 1 - Disable activity bit in Router Algorithmic LPM Unicast Host + * Entry (RAUHT). + * Bits 2:7 are reserved. + * Access: RW + * + * Note: Not supported by SwitchX, SwitchX-2 and Switch-IB. + */ +MLXSW_ITEM32(reg, rgcr, activity_dis, 0x20, 0, 8); + +static inline void mlxsw_reg_rgcr_pack(char *payload, bool ipv4_en) +{ + MLXSW_REG_ZERO(rgcr, payload); + mlxsw_reg_rgcr_ipv4_en_set(payload, ipv4_en); +} + +/* RITR - Router Interface Table Register + * -------------------------------------- + * The register is used to configure the router interface table. + */ +#define MLXSW_REG_RITR_ID 0x8002 +#define MLXSW_REG_RITR_LEN 0x40 + +static const struct mlxsw_reg_info mlxsw_reg_ritr = { + .id = MLXSW_REG_RITR_ID, + .len = MLXSW_REG_RITR_LEN, +}; + +/* reg_ritr_enable + * Enables routing on the router interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, enable, 0x00, 31, 1); + +/* reg_ritr_ipv4 + * IPv4 routing enable. Enables routing of IPv4 traffic on the router + * interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv4, 0x00, 29, 1); + +/* reg_ritr_ipv6 + * IPv6 routing enable. Enables routing of IPv6 traffic on the router + * interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv6, 0x00, 28, 1); + +enum mlxsw_reg_ritr_if_type { + MLXSW_REG_RITR_VLAN_IF, + MLXSW_REG_RITR_FID_IF, + MLXSW_REG_RITR_SP_IF, +}; + +/* reg_ritr_type + * Router interface type. + * 0 - VLAN interface. + * 1 - FID interface. + * 2 - Sub-port interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, type, 0x00, 23, 3); + +enum { + MLXSW_REG_RITR_RIF_CREATE, + MLXSW_REG_RITR_RIF_DEL, +}; + +/* reg_ritr_op + * Opcode: + * 0 - Create or edit RIF. + * 1 - Delete RIF. + * Reserved for SwitchX-2. For Spectrum, editing of interface properties + * is not supported. An interface must be deleted and re-created in order + * to update properties. + * Access: WO + */ +MLXSW_ITEM32(reg, ritr, op, 0x00, 20, 2); + +/* reg_ritr_rif + * Router interface index. A pointer to the Router Interface Table. + * Access: Index + */ +MLXSW_ITEM32(reg, ritr, rif, 0x00, 0, 16); + +/* reg_ritr_ipv4_fe + * IPv4 Forwarding Enable. + * Enables routing of IPv4 traffic on the router interface. When disabled, + * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. + * Not supported in SwitchX-2. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv4_fe, 0x04, 29, 1); + +/* reg_ritr_ipv6_fe + * IPv6 Forwarding Enable. + * Enables routing of IPv6 traffic on the router interface. When disabled, + * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. + * Not supported in SwitchX-2. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, ipv6_fe, 0x04, 28, 1); + +/* reg_ritr_virtual_router + * Virtual router ID associated with the router interface. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, virtual_router, 0x04, 0, 16); + +/* reg_ritr_mtu + * Router interface MTU. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, mtu, 0x34, 0, 16); + +/* reg_ritr_if_swid + * Switch partition ID. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, if_swid, 0x08, 24, 8); + +/* reg_ritr_if_mac + * Router interface MAC address. + * In Spectrum, all MAC addresses must have the same 38 MSBits. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, ritr, if_mac, 0x12, 6); + +/* VLAN Interface */ + +/* reg_ritr_vlan_if_vid + * VLAN ID. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, vlan_if_vid, 0x08, 0, 12); + +/* FID Interface */ + +/* reg_ritr_fid_if_fid + * Filtering ID. Used to connect a bridge to the router. Only FIDs from + * the vFID range are supported. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, fid_if_fid, 0x08, 0, 16); + +static inline void mlxsw_reg_ritr_fid_set(char *payload, + enum mlxsw_reg_ritr_if_type rif_type, + u16 fid) +{ + if (rif_type == MLXSW_REG_RITR_FID_IF) + mlxsw_reg_ritr_fid_if_fid_set(payload, fid); + else + mlxsw_reg_ritr_vlan_if_vid_set(payload, fid); +} + +/* Sub-port Interface */ + +/* reg_ritr_sp_if_lag + * LAG indication. When this bit is set the system_port field holds the + * LAG identifier. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, sp_if_lag, 0x08, 24, 1); + +/* reg_ritr_sp_system_port + * Port unique indentifier. When lag bit is set, this field holds the + * lag_id in bits 0:9. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, sp_if_system_port, 0x08, 0, 16); + +/* reg_ritr_sp_if_vid + * VLAN ID. + * Access: RW + */ +MLXSW_ITEM32(reg, ritr, sp_if_vid, 0x18, 0, 12); + +static inline void mlxsw_reg_ritr_rif_pack(char *payload, u16 rif) +{ + MLXSW_REG_ZERO(ritr, payload); + mlxsw_reg_ritr_rif_set(payload, rif); +} + +static inline void mlxsw_reg_ritr_sp_if_pack(char *payload, bool lag, + u16 system_port, u16 vid) +{ + mlxsw_reg_ritr_sp_if_lag_set(payload, lag); + mlxsw_reg_ritr_sp_if_system_port_set(payload, system_port); + mlxsw_reg_ritr_sp_if_vid_set(payload, vid); +} + +static inline void mlxsw_reg_ritr_pack(char *payload, bool enable, + enum mlxsw_reg_ritr_if_type type, + u16 rif, u16 mtu, const char *mac) +{ + bool op = enable ? MLXSW_REG_RITR_RIF_CREATE : MLXSW_REG_RITR_RIF_DEL; + + MLXSW_REG_ZERO(ritr, payload); + mlxsw_reg_ritr_enable_set(payload, enable); + mlxsw_reg_ritr_ipv4_set(payload, 1); + mlxsw_reg_ritr_type_set(payload, type); + mlxsw_reg_ritr_op_set(payload, op); + mlxsw_reg_ritr_rif_set(payload, rif); + mlxsw_reg_ritr_ipv4_fe_set(payload, 1); + mlxsw_reg_ritr_mtu_set(payload, mtu); + mlxsw_reg_ritr_if_mac_memcpy_to(payload, mac); +} + +/* RATR - Router Adjacency Table Register + * -------------------------------------- + * The RATR register is used to configure the Router Adjacency (next-hop) + * Table. + */ +#define MLXSW_REG_RATR_ID 0x8008 +#define MLXSW_REG_RATR_LEN 0x2C + +static const struct mlxsw_reg_info mlxsw_reg_ratr = { + .id = MLXSW_REG_RATR_ID, + .len = MLXSW_REG_RATR_LEN, +}; + +enum mlxsw_reg_ratr_op { + /* Read */ + MLXSW_REG_RATR_OP_QUERY_READ = 0, + /* Read and clear activity */ + MLXSW_REG_RATR_OP_QUERY_READ_CLEAR = 2, + /* Write Adjacency entry */ + MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY = 1, + /* Write Adjacency entry only if the activity is cleared. + * The write may not succeed if the activity is set. There is not + * direct feedback if the write has succeeded or not, however + * the get will reveal the actual entry (SW can compare the get + * response to the set command). + */ + MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY_ON_ACTIVITY = 3, +}; + +/* reg_ratr_op + * Note that Write operation may also be used for updating + * counter_set_type and counter_index. In this case all other + * fields must not be updated. + * Access: OP + */ +MLXSW_ITEM32(reg, ratr, op, 0x00, 28, 4); + +/* reg_ratr_v + * Valid bit. Indicates if the adjacency entry is valid. + * Note: the device may need some time before reusing an invalidated + * entry. During this time the entry can not be reused. It is + * recommended to use another entry before reusing an invalidated + * entry (e.g. software can put it at the end of the list for + * reusing). Trying to access an invalidated entry not yet cleared + * by the device results with failure indicating "Try Again" status. + * When valid is '0' then egress_router_interface,trap_action, + * adjacency_parameters and counters are reserved + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, v, 0x00, 24, 1); + +/* reg_ratr_a + * Activity. Set for new entries. Set if a packet lookup has hit on + * the specific entry. To clear the a bit, use "clear activity". + * Access: RO + */ +MLXSW_ITEM32(reg, ratr, a, 0x00, 16, 1); + +/* reg_ratr_adjacency_index_low + * Bits 15:0 of index into the adjacency table. + * For SwitchX and SwitchX-2, the adjacency table is linear and + * used for adjacency entries only. + * For Spectrum, the index is to the KVD linear. + * Access: Index + */ +MLXSW_ITEM32(reg, ratr, adjacency_index_low, 0x04, 0, 16); + +/* reg_ratr_egress_router_interface + * Range is 0 .. cap_max_router_interfaces - 1 + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, egress_router_interface, 0x08, 0, 16); + +enum mlxsw_reg_ratr_trap_action { + MLXSW_REG_RATR_TRAP_ACTION_NOP, + MLXSW_REG_RATR_TRAP_ACTION_TRAP, + MLXSW_REG_RATR_TRAP_ACTION_MIRROR_TO_CPU, + MLXSW_REG_RATR_TRAP_ACTION_MIRROR, + MLXSW_REG_RATR_TRAP_ACTION_DISCARD_ERRORS, +}; + +/* reg_ratr_trap_action + * see mlxsw_reg_ratr_trap_action + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, trap_action, 0x0C, 28, 4); + +enum mlxsw_reg_ratr_trap_id { + MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS0 = 0, + MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS1 = 1, +}; + +/* reg_ratr_adjacency_index_high + * Bits 23:16 of the adjacency_index. + * Access: Index + */ +MLXSW_ITEM32(reg, ratr, adjacency_index_high, 0x0C, 16, 8); + +/* reg_ratr_trap_id + * Trap ID to be reported to CPU. + * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. + * For trap_action of NOP, MIRROR and DISCARD_ERROR + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, trap_id, 0x0C, 0, 8); + +/* reg_ratr_eth_destination_mac + * MAC address of the destination next-hop. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, ratr, eth_destination_mac, 0x12, 6); + +static inline void +mlxsw_reg_ratr_pack(char *payload, + enum mlxsw_reg_ratr_op op, bool valid, + u32 adjacency_index, u16 egress_rif) +{ + MLXSW_REG_ZERO(ratr, payload); + mlxsw_reg_ratr_op_set(payload, op); + mlxsw_reg_ratr_v_set(payload, valid); + mlxsw_reg_ratr_adjacency_index_low_set(payload, adjacency_index); + mlxsw_reg_ratr_adjacency_index_high_set(payload, adjacency_index >> 16); + mlxsw_reg_ratr_egress_router_interface_set(payload, egress_rif); +} + +static inline void mlxsw_reg_ratr_eth_entry_pack(char *payload, + const char *dest_mac) +{ + mlxsw_reg_ratr_eth_destination_mac_memcpy_to(payload, dest_mac); +} + +/* RALTA - Router Algorithmic LPM Tree Allocation Register + * ------------------------------------------------------- + * RALTA is used to allocate the LPM trees of the SHSPM method. + */ +#define MLXSW_REG_RALTA_ID 0x8010 +#define MLXSW_REG_RALTA_LEN 0x04 + +static const struct mlxsw_reg_info mlxsw_reg_ralta = { + .id = MLXSW_REG_RALTA_ID, + .len = MLXSW_REG_RALTA_LEN, +}; + +/* reg_ralta_op + * opcode (valid for Write, must be 0 on Read) + * 0 - allocate a tree + * 1 - deallocate a tree + * Access: OP + */ +MLXSW_ITEM32(reg, ralta, op, 0x00, 28, 2); + +enum mlxsw_reg_ralxx_protocol { + MLXSW_REG_RALXX_PROTOCOL_IPV4, + MLXSW_REG_RALXX_PROTOCOL_IPV6, +}; + +/* reg_ralta_protocol + * Protocol. + * Deallocation opcode: Reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, ralta, protocol, 0x00, 24, 4); + +/* reg_ralta_tree_id + * An identifier (numbered from 1..cap_shspm_max_trees-1) representing + * the tree identifier (managed by software). + * Note that tree_id 0 is allocated for a default-route tree. + * Access: Index + */ +MLXSW_ITEM32(reg, ralta, tree_id, 0x00, 0, 8); + +static inline void mlxsw_reg_ralta_pack(char *payload, bool alloc, + enum mlxsw_reg_ralxx_protocol protocol, + u8 tree_id) +{ + MLXSW_REG_ZERO(ralta, payload); + mlxsw_reg_ralta_op_set(payload, !alloc); + mlxsw_reg_ralta_protocol_set(payload, protocol); + mlxsw_reg_ralta_tree_id_set(payload, tree_id); +} + +/* RALST - Router Algorithmic LPM Structure Tree Register + * ------------------------------------------------------ + * RALST is used to set and query the structure of an LPM tree. + * The structure of the tree must be sorted as a sorted binary tree, while + * each node is a bin that is tagged as the length of the prefixes the lookup + * will refer to. Therefore, bin X refers to a set of entries with prefixes + * of X bits to match with the destination address. The bin 0 indicates + * the default action, when there is no match of any prefix. + */ +#define MLXSW_REG_RALST_ID 0x8011 +#define MLXSW_REG_RALST_LEN 0x104 + +static const struct mlxsw_reg_info mlxsw_reg_ralst = { + .id = MLXSW_REG_RALST_ID, + .len = MLXSW_REG_RALST_LEN, +}; + +/* reg_ralst_root_bin + * The bin number of the root bin. + * 0<root_bin=<(length of IP address) + * For a default-route tree configure 0xff + * Access: RW + */ +MLXSW_ITEM32(reg, ralst, root_bin, 0x00, 16, 8); + +/* reg_ralst_tree_id + * Tree identifier numbered from 1..(cap_shspm_max_trees-1). + * Access: Index + */ +MLXSW_ITEM32(reg, ralst, tree_id, 0x00, 0, 8); + +#define MLXSW_REG_RALST_BIN_NO_CHILD 0xff +#define MLXSW_REG_RALST_BIN_OFFSET 0x04 +#define MLXSW_REG_RALST_BIN_COUNT 128 + +/* reg_ralst_left_child_bin + * Holding the children of the bin according to the stored tree's structure. + * For trees composed of less than 4 blocks, the bins in excess are reserved. + * Note that tree_id 0 is allocated for a default-route tree, bins are 0xff + * Access: RW + */ +MLXSW_ITEM16_INDEXED(reg, ralst, left_child_bin, 0x04, 8, 8, 0x02, 0x00, false); + +/* reg_ralst_right_child_bin + * Holding the children of the bin according to the stored tree's structure. + * For trees composed of less than 4 blocks, the bins in excess are reserved. + * Note that tree_id 0 is allocated for a default-route tree, bins are 0xff + * Access: RW + */ +MLXSW_ITEM16_INDEXED(reg, ralst, right_child_bin, 0x04, 0, 8, 0x02, 0x00, + false); + +static inline void mlxsw_reg_ralst_pack(char *payload, u8 root_bin, u8 tree_id) +{ + MLXSW_REG_ZERO(ralst, payload); + + /* Initialize all bins to have no left or right child */ + memset(payload + MLXSW_REG_RALST_BIN_OFFSET, + MLXSW_REG_RALST_BIN_NO_CHILD, MLXSW_REG_RALST_BIN_COUNT * 2); + + mlxsw_reg_ralst_root_bin_set(payload, root_bin); + mlxsw_reg_ralst_tree_id_set(payload, tree_id); +} + +static inline void mlxsw_reg_ralst_bin_pack(char *payload, u8 bin_number, + u8 left_child_bin, + u8 right_child_bin) +{ + int bin_index = bin_number - 1; + + mlxsw_reg_ralst_left_child_bin_set(payload, bin_index, left_child_bin); + mlxsw_reg_ralst_right_child_bin_set(payload, bin_index, + right_child_bin); +} + +/* RALTB - Router Algorithmic LPM Tree Binding Register + * ---------------------------------------------------- + * RALTB is used to bind virtual router and protocol to an allocated LPM tree. + */ +#define MLXSW_REG_RALTB_ID 0x8012 +#define MLXSW_REG_RALTB_LEN 0x04 + +static const struct mlxsw_reg_info mlxsw_reg_raltb = { + .id = MLXSW_REG_RALTB_ID, + .len = MLXSW_REG_RALTB_LEN, +}; + +/* reg_raltb_virtual_router + * Virtual Router ID + * Range is 0..cap_max_virtual_routers-1 + * Access: Index + */ +MLXSW_ITEM32(reg, raltb, virtual_router, 0x00, 16, 16); + +/* reg_raltb_protocol + * Protocol. + * Access: Index + */ +MLXSW_ITEM32(reg, raltb, protocol, 0x00, 12, 4); + +/* reg_raltb_tree_id + * Tree to be used for the {virtual_router, protocol} + * Tree identifier numbered from 1..(cap_shspm_max_trees-1). + * By default, all Unicast IPv4 and IPv6 are bound to tree_id 0. + * Access: RW + */ +MLXSW_ITEM32(reg, raltb, tree_id, 0x00, 0, 8); + +static inline void mlxsw_reg_raltb_pack(char *payload, u16 virtual_router, + enum mlxsw_reg_ralxx_protocol protocol, + u8 tree_id) +{ + MLXSW_REG_ZERO(raltb, payload); + mlxsw_reg_raltb_virtual_router_set(payload, virtual_router); + mlxsw_reg_raltb_protocol_set(payload, protocol); + mlxsw_reg_raltb_tree_id_set(payload, tree_id); +} + +/* RALUE - Router Algorithmic LPM Unicast Entry Register + * ----------------------------------------------------- + * RALUE is used to configure and query LPM entries that serve + * the Unicast protocols. + */ +#define MLXSW_REG_RALUE_ID 0x8013 +#define MLXSW_REG_RALUE_LEN 0x38 + +static const struct mlxsw_reg_info mlxsw_reg_ralue = { + .id = MLXSW_REG_RALUE_ID, + .len = MLXSW_REG_RALUE_LEN, +}; + +/* reg_ralue_protocol + * Protocol. + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, protocol, 0x00, 24, 4); + +enum mlxsw_reg_ralue_op { + /* Read operation. If entry doesn't exist, the operation fails. */ + MLXSW_REG_RALUE_OP_QUERY_READ = 0, + /* Clear on read operation. Used to read entry and + * clear Activity bit. + */ + MLXSW_REG_RALUE_OP_QUERY_CLEAR = 1, + /* Write operation. Used to write a new entry to the table. All RW + * fields are written for new entry. Activity bit is set + * for new entries. + */ + MLXSW_REG_RALUE_OP_WRITE_WRITE = 0, + /* Update operation. Used to update an existing route entry and + * only update the RW fields that are detailed in the field + * op_u_mask. If entry doesn't exist, the operation fails. + */ + MLXSW_REG_RALUE_OP_WRITE_UPDATE = 1, + /* Clear activity. The Activity bit (the field a) is cleared + * for the entry. + */ + MLXSW_REG_RALUE_OP_WRITE_CLEAR = 2, + /* Delete operation. Used to delete an existing entry. If entry + * doesn't exist, the operation fails. + */ + MLXSW_REG_RALUE_OP_WRITE_DELETE = 3, +}; + +/* reg_ralue_op + * Operation. + * Access: OP + */ +MLXSW_ITEM32(reg, ralue, op, 0x00, 20, 3); + +/* reg_ralue_a + * Activity. Set for new entries. Set if a packet lookup has hit on the + * specific entry, only if the entry is a route. To clear the a bit, use + * "clear activity" op. + * Enabled by activity_dis in RGCR + * Access: RO + */ +MLXSW_ITEM32(reg, ralue, a, 0x00, 16, 1); + +/* reg_ralue_virtual_router + * Virtual Router ID + * Range is 0..cap_max_virtual_routers-1 + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, virtual_router, 0x04, 16, 16); + +#define MLXSW_REG_RALUE_OP_U_MASK_ENTRY_TYPE BIT(0) +#define MLXSW_REG_RALUE_OP_U_MASK_BMP_LEN BIT(1) +#define MLXSW_REG_RALUE_OP_U_MASK_ACTION BIT(2) + +/* reg_ralue_op_u_mask + * opcode update mask. + * On read operation, this field is reserved. + * This field is valid for update opcode, otherwise - reserved. + * This field is a bitmask of the fields that should be updated. + * Access: WO + */ +MLXSW_ITEM32(reg, ralue, op_u_mask, 0x04, 8, 3); + +/* reg_ralue_prefix_len + * Number of bits in the prefix of the LPM route. + * Note that for IPv6 prefixes, if prefix_len>64 the entry consumes + * two entries in the physical HW table. + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, prefix_len, 0x08, 0, 8); + +/* reg_ralue_dip* + * The prefix of the route or of the marker that the object of the LPM + * is compared with. The most significant bits of the dip are the prefix. + * The list significant bits must be '0' if the prefix_len is smaller + * than 128 for IPv6 or smaller than 32 for IPv4. + * IPv4 address uses bits dip[31:0] and bits dip[127:32] are reserved. + * Access: Index + */ +MLXSW_ITEM32(reg, ralue, dip4, 0x18, 0, 32); + +enum mlxsw_reg_ralue_entry_type { + MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_ENTRY = 1, + MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY = 2, + MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_AND_ROUTE_ENTRY = 3, +}; + +/* reg_ralue_entry_type + * Entry type. + * Note - for Marker entries, the action_type and action fields are reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, entry_type, 0x1C, 30, 2); + +/* reg_ralue_bmp_len + * The best match prefix length in the case that there is no match for + * longer prefixes. + * If (entry_type != MARKER_ENTRY), bmp_len must be equal to prefix_len + * Note for any update operation with entry_type modification this + * field must be set. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, bmp_len, 0x1C, 16, 8); + +enum mlxsw_reg_ralue_action_type { + MLXSW_REG_RALUE_ACTION_TYPE_REMOTE, + MLXSW_REG_RALUE_ACTION_TYPE_LOCAL, + MLXSW_REG_RALUE_ACTION_TYPE_IP2ME, +}; + +/* reg_ralue_action_type + * Action Type + * Indicates how the IP address is connected. + * It can be connected to a local subnet through local_erif or can be + * on a remote subnet connected through a next-hop router, + * or transmitted to the CPU. + * Reserved when entry_type = MARKER_ENTRY + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, action_type, 0x1C, 0, 2); + +enum mlxsw_reg_ralue_trap_action { + MLXSW_REG_RALUE_TRAP_ACTION_NOP, + MLXSW_REG_RALUE_TRAP_ACTION_TRAP, + MLXSW_REG_RALUE_TRAP_ACTION_MIRROR_TO_CPU, + MLXSW_REG_RALUE_TRAP_ACTION_MIRROR, + MLXSW_REG_RALUE_TRAP_ACTION_DISCARD_ERROR, +}; + +/* reg_ralue_trap_action + * Trap action. + * For IP2ME action, only NOP and MIRROR are possible. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, trap_action, 0x20, 28, 4); + +/* reg_ralue_trap_id + * Trap ID to be reported to CPU. + * Trap ID is RTR_INGRESS0 or RTR_INGRESS1. + * For trap_action of NOP, MIRROR and DISCARD_ERROR, trap_id is reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, trap_id, 0x20, 0, 9); + +/* reg_ralue_adjacency_index + * Points to the first entry of the group-based ECMP. + * Only relevant in case of REMOTE action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, adjacency_index, 0x24, 0, 24); + +/* reg_ralue_ecmp_size + * Amount of sequential entries starting + * from the adjacency_index (the number of ECMPs). + * The valid range is 1-64, 512, 1024, 2048 and 4096. + * Reserved when trap_action is TRAP or DISCARD_ERROR. + * Only relevant in case of REMOTE action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, ecmp_size, 0x28, 0, 13); + +/* reg_ralue_local_erif + * Egress Router Interface. + * Only relevant in case of LOCAL action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, local_erif, 0x24, 0, 16); + +/* reg_ralue_v + * Valid bit for the tunnel_ptr field. + * If valid = 0 then trap to CPU as IP2ME trap ID. + * If valid = 1 and the packet format allows NVE or IPinIP tunnel + * decapsulation then tunnel decapsulation is done. + * If valid = 1 and packet format does not allow NVE or IPinIP tunnel + * decapsulation then trap as IP2ME trap ID. + * Only relevant in case of IP2ME action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, v, 0x24, 31, 1); + +/* reg_ralue_tunnel_ptr + * Tunnel Pointer for NVE or IPinIP tunnel decapsulation. + * For Spectrum, pointer to KVD Linear. + * Only relevant in case of IP2ME action. + * Access: RW + */ +MLXSW_ITEM32(reg, ralue, tunnel_ptr, 0x24, 0, 24); + +static inline void mlxsw_reg_ralue_pack(char *payload, + enum mlxsw_reg_ralxx_protocol protocol, + enum mlxsw_reg_ralue_op op, + u16 virtual_router, u8 prefix_len) +{ + MLXSW_REG_ZERO(ralue, payload); + mlxsw_reg_ralue_protocol_set(payload, protocol); + mlxsw_reg_ralue_virtual_router_set(payload, virtual_router); + mlxsw_reg_ralue_prefix_len_set(payload, prefix_len); + mlxsw_reg_ralue_entry_type_set(payload, + MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY); + mlxsw_reg_ralue_bmp_len_set(payload, prefix_len); +} + +static inline void mlxsw_reg_ralue_pack4(char *payload, + enum mlxsw_reg_ralxx_protocol protocol, + enum mlxsw_reg_ralue_op op, + u16 virtual_router, u8 prefix_len, + u32 dip) +{ + mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len); + mlxsw_reg_ralue_dip4_set(payload, dip); +} + +static inline void +mlxsw_reg_ralue_act_remote_pack(char *payload, + enum mlxsw_reg_ralue_trap_action trap_action, + u16 trap_id, u32 adjacency_index, u16 ecmp_size) +{ + mlxsw_reg_ralue_action_type_set(payload, + MLXSW_REG_RALUE_ACTION_TYPE_REMOTE); + mlxsw_reg_ralue_trap_action_set(payload, trap_action); + mlxsw_reg_ralue_trap_id_set(payload, trap_id); + mlxsw_reg_ralue_adjacency_index_set(payload, adjacency_index); + mlxsw_reg_ralue_ecmp_size_set(payload, ecmp_size); +} + +static inline void +mlxsw_reg_ralue_act_local_pack(char *payload, + enum mlxsw_reg_ralue_trap_action trap_action, + u16 trap_id, u16 local_erif) +{ + mlxsw_reg_ralue_action_type_set(payload, + MLXSW_REG_RALUE_ACTION_TYPE_LOCAL); + mlxsw_reg_ralue_trap_action_set(payload, trap_action); + mlxsw_reg_ralue_trap_id_set(payload, trap_id); + mlxsw_reg_ralue_local_erif_set(payload, local_erif); +} + +static inline void +mlxsw_reg_ralue_act_ip2me_pack(char *payload) +{ + mlxsw_reg_ralue_action_type_set(payload, + MLXSW_REG_RALUE_ACTION_TYPE_IP2ME); +} + +/* RAUHT - Router Algorithmic LPM Unicast Host Table Register + * ---------------------------------------------------------- + * The RAUHT register is used to configure and query the Unicast Host table in + * devices that implement the Algorithmic LPM. + */ +#define MLXSW_REG_RAUHT_ID 0x8014 +#define MLXSW_REG_RAUHT_LEN 0x74 + +static const struct mlxsw_reg_info mlxsw_reg_rauht = { + .id = MLXSW_REG_RAUHT_ID, + .len = MLXSW_REG_RAUHT_LEN, +}; + +enum mlxsw_reg_rauht_type { + MLXSW_REG_RAUHT_TYPE_IPV4, + MLXSW_REG_RAUHT_TYPE_IPV6, +}; + +/* reg_rauht_type + * Access: Index + */ +MLXSW_ITEM32(reg, rauht, type, 0x00, 24, 2); + +enum mlxsw_reg_rauht_op { + MLXSW_REG_RAUHT_OP_QUERY_READ = 0, + /* Read operation */ + MLXSW_REG_RAUHT_OP_QUERY_CLEAR_ON_READ = 1, + /* Clear on read operation. Used to read entry and clear + * activity bit. + */ + MLXSW_REG_RAUHT_OP_WRITE_ADD = 0, + /* Add. Used to write a new entry to the table. All R/W fields are + * relevant for new entry. Activity bit is set for new entries. + */ + MLXSW_REG_RAUHT_OP_WRITE_UPDATE = 1, + /* Update action. Used to update an existing route entry and + * only update the following fields: + * trap_action, trap_id, mac, counter_set_type, counter_index + */ + MLXSW_REG_RAUHT_OP_WRITE_CLEAR_ACTIVITY = 2, + /* Clear activity. A bit is cleared for the entry. */ + MLXSW_REG_RAUHT_OP_WRITE_DELETE = 3, + /* Delete entry */ + MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL = 4, + /* Delete all host entries on a RIF. In this command, dip + * field is reserved. + */ +}; + +/* reg_rauht_op + * Access: OP + */ +MLXSW_ITEM32(reg, rauht, op, 0x00, 20, 3); + +/* reg_rauht_a + * Activity. Set for new entries. Set if a packet lookup has hit on + * the specific entry. + * To clear the a bit, use "clear activity" op. + * Enabled by activity_dis in RGCR + * Access: RO + */ +MLXSW_ITEM32(reg, rauht, a, 0x00, 16, 1); + +/* reg_rauht_rif + * Router Interface + * Access: Index + */ +MLXSW_ITEM32(reg, rauht, rif, 0x00, 0, 16); + +/* reg_rauht_dip* + * Destination address. + * Access: Index + */ +MLXSW_ITEM32(reg, rauht, dip4, 0x1C, 0x0, 32); + +enum mlxsw_reg_rauht_trap_action { + MLXSW_REG_RAUHT_TRAP_ACTION_NOP, + MLXSW_REG_RAUHT_TRAP_ACTION_TRAP, + MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR_TO_CPU, + MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR, + MLXSW_REG_RAUHT_TRAP_ACTION_DISCARD_ERRORS, +}; + +/* reg_rauht_trap_action + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, trap_action, 0x60, 28, 4); + +enum mlxsw_reg_rauht_trap_id { + MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS0, + MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS1, +}; + +/* reg_rauht_trap_id + * Trap ID to be reported to CPU. + * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. + * For trap_action of NOP, MIRROR and DISCARD_ERROR, + * trap_id is reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, trap_id, 0x60, 0, 9); + +/* reg_rauht_counter_set_type + * Counter set type for flow counters + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, counter_set_type, 0x68, 24, 8); + +/* reg_rauht_counter_index + * Counter index for flow counters + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, counter_index, 0x68, 0, 24); + +/* reg_rauht_mac + * MAC address. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, rauht, mac, 0x6E, 6); + +static inline void mlxsw_reg_rauht_pack(char *payload, + enum mlxsw_reg_rauht_op op, u16 rif, + const char *mac) +{ + MLXSW_REG_ZERO(rauht, payload); + mlxsw_reg_rauht_op_set(payload, op); + mlxsw_reg_rauht_rif_set(payload, rif); + mlxsw_reg_rauht_mac_memcpy_to(payload, mac); +} + +static inline void mlxsw_reg_rauht_pack4(char *payload, + enum mlxsw_reg_rauht_op op, u16 rif, + const char *mac, u32 dip) +{ + mlxsw_reg_rauht_pack(payload, op, rif, mac); + mlxsw_reg_rauht_dip4_set(payload, dip); +} + +/* RALEU - Router Algorithmic LPM ECMP Update Register + * --------------------------------------------------- + * The register enables updating the ECMP section in the action for multiple + * LPM Unicast entries in a single operation. The update is executed to + * all entries of a {virtual router, protocol} tuple using the same ECMP group. + */ +#define MLXSW_REG_RALEU_ID 0x8015 +#define MLXSW_REG_RALEU_LEN 0x28 + +static const struct mlxsw_reg_info mlxsw_reg_raleu = { + .id = MLXSW_REG_RALEU_ID, + .len = MLXSW_REG_RALEU_LEN, +}; + +/* reg_raleu_protocol + * Protocol. + * Access: Index + */ +MLXSW_ITEM32(reg, raleu, protocol, 0x00, 24, 4); + +/* reg_raleu_virtual_router + * Virtual Router ID + * Range is 0..cap_max_virtual_routers-1 + * Access: Index + */ +MLXSW_ITEM32(reg, raleu, virtual_router, 0x00, 0, 16); + +/* reg_raleu_adjacency_index + * Adjacency Index used for matching on the existing entries. + * Access: Index + */ +MLXSW_ITEM32(reg, raleu, adjacency_index, 0x10, 0, 24); + +/* reg_raleu_ecmp_size + * ECMP Size used for matching on the existing entries. + * Access: Index + */ +MLXSW_ITEM32(reg, raleu, ecmp_size, 0x14, 0, 13); + +/* reg_raleu_new_adjacency_index + * New Adjacency Index. + * Access: WO + */ +MLXSW_ITEM32(reg, raleu, new_adjacency_index, 0x20, 0, 24); + +/* reg_raleu_new_ecmp_size + * New ECMP Size. + * Access: WO + */ +MLXSW_ITEM32(reg, raleu, new_ecmp_size, 0x24, 0, 13); + +static inline void mlxsw_reg_raleu_pack(char *payload, + enum mlxsw_reg_ralxx_protocol protocol, + u16 virtual_router, + u32 adjacency_index, u16 ecmp_size, + u32 new_adjacency_index, + u16 new_ecmp_size) +{ + MLXSW_REG_ZERO(raleu, payload); + mlxsw_reg_raleu_protocol_set(payload, protocol); + mlxsw_reg_raleu_virtual_router_set(payload, virtual_router); + mlxsw_reg_raleu_adjacency_index_set(payload, adjacency_index); + mlxsw_reg_raleu_ecmp_size_set(payload, ecmp_size); + mlxsw_reg_raleu_new_adjacency_index_set(payload, new_adjacency_index); + mlxsw_reg_raleu_new_ecmp_size_set(payload, new_ecmp_size); +} + +/* RAUHTD - Router Algorithmic LPM Unicast Host Table Dump Register + * ---------------------------------------------------------------- + * The RAUHTD register allows dumping entries from the Router Unicast Host + * Table. For a given session an entry is dumped no more than one time. The + * first RAUHTD access after reset is a new session. A session ends when the + * num_rec response is smaller than num_rec request or for IPv4 when the + * num_entries is smaller than 4. The clear activity affect the current session + * or the last session if a new session has not started. + */ +#define MLXSW_REG_RAUHTD_ID 0x8018 +#define MLXSW_REG_RAUHTD_BASE_LEN 0x20 +#define MLXSW_REG_RAUHTD_REC_LEN 0x20 +#define MLXSW_REG_RAUHTD_REC_MAX_NUM 32 +#define MLXSW_REG_RAUHTD_LEN (MLXSW_REG_RAUHTD_BASE_LEN + \ + MLXSW_REG_RAUHTD_REC_MAX_NUM * MLXSW_REG_RAUHTD_REC_LEN) +#define MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC 4 + +static const struct mlxsw_reg_info mlxsw_reg_rauhtd = { + .id = MLXSW_REG_RAUHTD_ID, + .len = MLXSW_REG_RAUHTD_LEN, +}; + +#define MLXSW_REG_RAUHTD_FILTER_A BIT(0) +#define MLXSW_REG_RAUHTD_FILTER_RIF BIT(3) + +/* reg_rauhtd_filter_fields + * if a bit is '0' then the relevant field is ignored and dump is done + * regardless of the field value + * Bit0 - filter by activity: entry_a + * Bit3 - filter by entry rip: entry_rif + * Access: Index + */ +MLXSW_ITEM32(reg, rauhtd, filter_fields, 0x00, 0, 8); + +enum mlxsw_reg_rauhtd_op { + MLXSW_REG_RAUHTD_OP_DUMP, + MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR, +}; + +/* reg_rauhtd_op + * Access: OP + */ +MLXSW_ITEM32(reg, rauhtd, op, 0x04, 24, 2); + +/* reg_rauhtd_num_rec + * At request: number of records requested + * At response: number of records dumped + * For IPv4, each record has 4 entries at request and up to 4 entries + * at response + * Range is 0..MLXSW_REG_RAUHTD_REC_MAX_NUM + * Access: Index + */ +MLXSW_ITEM32(reg, rauhtd, num_rec, 0x04, 0, 8); + +/* reg_rauhtd_entry_a + * Dump only if activity has value of entry_a + * Reserved if filter_fields bit0 is '0' + * Access: Index + */ +MLXSW_ITEM32(reg, rauhtd, entry_a, 0x08, 16, 1); + +enum mlxsw_reg_rauhtd_type { + MLXSW_REG_RAUHTD_TYPE_IPV4, + MLXSW_REG_RAUHTD_TYPE_IPV6, +}; + +/* reg_rauhtd_type + * Dump only if record type is: + * 0 - IPv4 + * 1 - IPv6 + * Access: Index + */ +MLXSW_ITEM32(reg, rauhtd, type, 0x08, 0, 4); + +/* reg_rauhtd_entry_rif + * Dump only if RIF has value of entry_rif + * Reserved if filter_fields bit3 is '0' + * Access: Index + */ +MLXSW_ITEM32(reg, rauhtd, entry_rif, 0x0C, 0, 16); + +static inline void mlxsw_reg_rauhtd_pack(char *payload, + enum mlxsw_reg_rauhtd_type type) +{ + MLXSW_REG_ZERO(rauhtd, payload); + mlxsw_reg_rauhtd_filter_fields_set(payload, MLXSW_REG_RAUHTD_FILTER_A); + mlxsw_reg_rauhtd_op_set(payload, MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR); + mlxsw_reg_rauhtd_num_rec_set(payload, MLXSW_REG_RAUHTD_REC_MAX_NUM); + mlxsw_reg_rauhtd_entry_a_set(payload, 1); + mlxsw_reg_rauhtd_type_set(payload, type); +} + +/* reg_rauhtd_ipv4_rec_num_entries + * Number of valid entries in this record: + * 0 - 1 valid entry + * 1 - 2 valid entries + * 2 - 3 valid entries + * 3 - 4 valid entries + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_rec_num_entries, + MLXSW_REG_RAUHTD_BASE_LEN, 28, 2, + MLXSW_REG_RAUHTD_REC_LEN, 0x00, false); + +/* reg_rauhtd_rec_type + * Record type. + * 0 - IPv4 + * 1 - IPv6 + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, rauhtd, rec_type, MLXSW_REG_RAUHTD_BASE_LEN, 24, 2, + MLXSW_REG_RAUHTD_REC_LEN, 0x00, false); + +#define MLXSW_REG_RAUHTD_IPV4_ENT_LEN 0x8 + +/* reg_rauhtd_ipv4_ent_a + * Activity. Set for new entries. Set if a packet lookup has hit on the + * specific entry. + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_a, MLXSW_REG_RAUHTD_BASE_LEN, 16, 1, + MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false); + +/* reg_rauhtd_ipv4_ent_rif + * Router interface. + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_rif, MLXSW_REG_RAUHTD_BASE_LEN, 0, + 16, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false); + +/* reg_rauhtd_ipv4_ent_dip + * Destination IPv4 address. + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_dip, MLXSW_REG_RAUHTD_BASE_LEN, 0, + 32, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x04, false); + +static inline void mlxsw_reg_rauhtd_ent_ipv4_unpack(char *payload, + int ent_index, u16 *p_rif, + u32 *p_dip) +{ + *p_rif = mlxsw_reg_rauhtd_ipv4_ent_rif_get(payload, ent_index); + *p_dip = mlxsw_reg_rauhtd_ipv4_ent_dip_get(payload, ent_index); +} + /* MFCR - Management Fan Control Register * -------------------------------------- * This register controls the settings of the Fan Speed PWM mechanism. @@ -3435,6 +4633,123 @@ static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp, mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name); } +/* MPAT - Monitoring Port Analyzer Table + * ------------------------------------- + * MPAT Register is used to query and configure the Switch PortAnalyzer Table. + * For an enabled analyzer, all fields except e (enable) cannot be modified. + */ +#define MLXSW_REG_MPAT_ID 0x901A +#define MLXSW_REG_MPAT_LEN 0x78 + +static const struct mlxsw_reg_info mlxsw_reg_mpat = { + .id = MLXSW_REG_MPAT_ID, + .len = MLXSW_REG_MPAT_LEN, +}; + +/* reg_mpat_pa_id + * Port Analyzer ID. + * Access: Index + */ +MLXSW_ITEM32(reg, mpat, pa_id, 0x00, 28, 4); + +/* reg_mpat_system_port + * A unique port identifier for the final destination of the packet. + * Access: RW + */ +MLXSW_ITEM32(reg, mpat, system_port, 0x00, 0, 16); + +/* reg_mpat_e + * Enable. Indicating the Port Analyzer is enabled. + * Access: RW + */ +MLXSW_ITEM32(reg, mpat, e, 0x04, 31, 1); + +/* reg_mpat_qos + * Quality Of Service Mode. + * 0: CONFIGURED - QoS parameters (Switch Priority, and encapsulation + * PCP, DEI, DSCP or VL) are configured. + * 1: MAINTAIN - QoS parameters (Switch Priority, Color) are the + * same as in the original packet that has triggered the mirroring. For + * SPAN also the pcp,dei are maintained. + * Access: RW + */ +MLXSW_ITEM32(reg, mpat, qos, 0x04, 26, 1); + +/* reg_mpat_be + * Best effort mode. Indicates mirroring traffic should not cause packet + * drop or back pressure, but will discard the mirrored packets. Mirrored + * packets will be forwarded on a best effort manner. + * 0: Do not discard mirrored packets + * 1: Discard mirrored packets if causing congestion + * Access: RW + */ +MLXSW_ITEM32(reg, mpat, be, 0x04, 25, 1); + +static inline void mlxsw_reg_mpat_pack(char *payload, u8 pa_id, + u16 system_port, bool e) +{ + MLXSW_REG_ZERO(mpat, payload); + mlxsw_reg_mpat_pa_id_set(payload, pa_id); + mlxsw_reg_mpat_system_port_set(payload, system_port); + mlxsw_reg_mpat_e_set(payload, e); + mlxsw_reg_mpat_qos_set(payload, 1); + mlxsw_reg_mpat_be_set(payload, 1); +} + +/* MPAR - Monitoring Port Analyzer Register + * ---------------------------------------- + * MPAR register is used to query and configure the port analyzer port mirroring + * properties. + */ +#define MLXSW_REG_MPAR_ID 0x901B +#define MLXSW_REG_MPAR_LEN 0x08 + +static const struct mlxsw_reg_info mlxsw_reg_mpar = { + .id = MLXSW_REG_MPAR_ID, + .len = MLXSW_REG_MPAR_LEN, +}; + +/* reg_mpar_local_port + * The local port to mirror the packets from. + * Access: Index + */ +MLXSW_ITEM32(reg, mpar, local_port, 0x00, 16, 8); + +enum mlxsw_reg_mpar_i_e { + MLXSW_REG_MPAR_TYPE_EGRESS, + MLXSW_REG_MPAR_TYPE_INGRESS, +}; + +/* reg_mpar_i_e + * Ingress/Egress + * Access: Index + */ +MLXSW_ITEM32(reg, mpar, i_e, 0x00, 0, 4); + +/* reg_mpar_enable + * Enable mirroring + * By default, port mirroring is disabled for all ports. + * Access: RW + */ +MLXSW_ITEM32(reg, mpar, enable, 0x04, 31, 1); + +/* reg_mpar_pa_id + * Port Analyzer ID. + * Access: RW + */ +MLXSW_ITEM32(reg, mpar, pa_id, 0x04, 0, 4); + +static inline void mlxsw_reg_mpar_pack(char *payload, u8 local_port, + enum mlxsw_reg_mpar_i_e i_e, + bool enable, u8 pa_id) +{ + MLXSW_REG_ZERO(mpar, payload); + mlxsw_reg_mpar_local_port_set(payload, local_port); + mlxsw_reg_mpar_enable_set(payload, enable); + mlxsw_reg_mpar_i_e_set(payload, i_e); + mlxsw_reg_mpar_pa_id_set(payload, pa_id); +} + /* MLCR - Management LED Control Register * -------------------------------------- * Controls the system LEDs. @@ -3864,6 +5179,45 @@ static inline void mlxsw_reg_sbsr_rec_unpack(char *payload, int rec_index, mlxsw_reg_sbsr_rec_max_buff_occupancy_get(payload, rec_index); } +/* SBIB - Shared Buffer Internal Buffer Register + * --------------------------------------------- + * The SBIB register configures per port buffers for internal use. The internal + * buffers consume memory on the port buffers (note that the port buffers are + * used also by PBMC). + * + * For Spectrum this is used for egress mirroring. + */ +#define MLXSW_REG_SBIB_ID 0xB006 +#define MLXSW_REG_SBIB_LEN 0x10 + +static const struct mlxsw_reg_info mlxsw_reg_sbib = { + .id = MLXSW_REG_SBIB_ID, + .len = MLXSW_REG_SBIB_LEN, +}; + +/* reg_sbib_local_port + * Local port number + * Not supported for CPU port and router port + * Access: Index + */ +MLXSW_ITEM32(reg, sbib, local_port, 0x00, 16, 8); + +/* reg_sbib_buff_size + * Units represented in cells + * Allowed range is 0 to (cap_max_headroom_size - 1) + * Default is 0 + * Access: RW + */ +MLXSW_ITEM32(reg, sbib, buff_size, 0x08, 0, 24); + +static inline void mlxsw_reg_sbib_pack(char *payload, u8 local_port, + u32 buff_size) +{ + MLXSW_REG_ZERO(sbib, payload); + mlxsw_reg_sbib_local_port_set(payload, local_port); + mlxsw_reg_sbib_buff_size_set(payload, buff_size); +} + static inline const char *mlxsw_reg_id_str(u16 reg_id) { switch (reg_id) { @@ -3939,6 +5293,26 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "HTGT"; case MLXSW_REG_HPKT_ID: return "HPKT"; + case MLXSW_REG_RGCR_ID: + return "RGCR"; + case MLXSW_REG_RITR_ID: + return "RITR"; + case MLXSW_REG_RATR_ID: + return "RATR"; + case MLXSW_REG_RALTA_ID: + return "RALTA"; + case MLXSW_REG_RALST_ID: + return "RALST"; + case MLXSW_REG_RALTB_ID: + return "RALTB"; + case MLXSW_REG_RALUE_ID: + return "RALUE"; + case MLXSW_REG_RAUHT_ID: + return "RAUHT"; + case MLXSW_REG_RALEU_ID: + return "RALEU"; + case MLXSW_REG_RAUHTD_ID: + return "RAUHTD"; case MLXSW_REG_MFCR_ID: return "MFCR"; case MLXSW_REG_MFSC_ID: @@ -3947,6 +5321,10 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "MFSM"; case MLXSW_REG_MTCAP_ID: return "MTCAP"; + case MLXSW_REG_MPAT_ID: + return "MPAT"; + case MLXSW_REG_MPAR_ID: + return "MPAR"; case MLXSW_REG_MTMP_ID: return "MTMP"; case MLXSW_REG_MLCR_ID: @@ -3961,6 +5339,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "SBMM"; case MLXSW_REG_SBSR_ID: return "SBSR"; + case MLXSW_REG_SBIB_ID: + return "SBIB"; default: return "*UNKNOWN*"; } |