diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/genet/bcmmii.c')
-rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 24 |
1 files changed, 11 insertions, 13 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 457c3bc8cfff..e907acd81da9 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -86,7 +86,7 @@ static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id, void bcmgenet_mii_setup(struct net_device *dev) { struct bcmgenet_priv *priv = netdev_priv(dev); - struct phy_device *phydev = priv->phydev; + struct phy_device *phydev = dev->phydev; u32 reg, cmd_bits = 0; bool status_changed = false; @@ -183,9 +183,9 @@ void bcmgenet_mii_reset(struct net_device *dev) if (GENET_IS_V4(priv)) return; - if (priv->phydev) { - phy_init_hw(priv->phydev); - phy_start_aneg(priv->phydev); + if (dev->phydev) { + phy_init_hw(dev->phydev); + phy_start_aneg(dev->phydev); } } @@ -236,6 +236,7 @@ static void bcmgenet_internal_phy_setup(struct net_device *dev) static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) { + struct net_device *ndev = priv->dev; u32 reg; /* Speed settings are set in bcmgenet_mii_setup() */ @@ -244,14 +245,14 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL); if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET) - fixed_phy_set_link_update(priv->phydev, + fixed_phy_set_link_update(ndev->phydev, bcmgenet_fixed_phy_link_update); } int bcmgenet_mii_config(struct net_device *dev) { struct bcmgenet_priv *priv = netdev_priv(dev); - struct phy_device *phydev = priv->phydev; + struct phy_device *phydev = dev->phydev; struct device *kdev = &priv->pdev->dev; const char *phy_name = NULL; u32 id_mode_dis = 0; @@ -302,7 +303,7 @@ int bcmgenet_mii_config(struct net_device *dev) * capabilities, use that knowledge to also configure the * Reverse MII interface correctly. */ - if ((priv->phydev->supported & PHY_BASIC_FEATURES) == + if ((phydev->supported & PHY_BASIC_FEATURES) == PHY_BASIC_FEATURES) port_ctrl = PORT_MODE_EXT_RVMII_25; else @@ -371,7 +372,7 @@ int bcmgenet_mii_probe(struct net_device *dev) return -ENODEV; } } else { - phydev = priv->phydev; + phydev = dev->phydev; phydev->dev_flags = phy_flags; ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, @@ -382,8 +383,6 @@ int bcmgenet_mii_probe(struct net_device *dev) } } - priv->phydev = phydev; - /* Configure port multiplexer based on what the probed PHY device since * reading the 'max-speed' property determines the maximum supported * PHY speed which is needed for bcmgenet_mii_config() to configure @@ -391,7 +390,7 @@ int bcmgenet_mii_probe(struct net_device *dev) */ ret = bcmgenet_mii_config(dev); if (ret) { - phy_disconnect(priv->phydev); + phy_disconnect(phydev); return ret; } @@ -401,7 +400,7 @@ int bcmgenet_mii_probe(struct net_device *dev) * Ethernet MAC ISRs */ if (priv->internal_phy) - priv->phydev->irq = PHY_IGNORE_INTERRUPT; + phydev->irq = PHY_IGNORE_INTERRUPT; return 0; } @@ -606,7 +605,6 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv) } - priv->phydev = phydev; priv->phy_interface = pd->phy_interface; return 0; |