diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/db8500-prcmu-regs.h | 194 | ||||
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 1843 |
2 files changed, 1802 insertions, 235 deletions
diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h index c1226da19bfb..3bbf04d58043 100644 --- a/drivers/mfd/db8500-prcmu-regs.h +++ b/drivers/mfd/db8500-prcmu-regs.h @@ -9,86 +9,158 @@ * * PRCM Unit registers */ +#ifndef __DB8500_PRCMU_REGS_H +#define __DB8500_PRCMU_REGS_H -#ifndef __MACH_PRCMU_REGS_H -#define __MACH_PRCMU_REGS_H - +#include <linux/bitops.h> #include <mach/hardware.h> -#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) -#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) -#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) -#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) -#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) -#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) -#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) +#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end)) + +#define PRCM_ARM_PLLDIVPS 0x118 +#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE BITS(0, 5) +#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xF + +#define PRCM_PLLARM_LOCKP 0x0A8 +#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1) + +#define PRCM_ARM_CHGCLKREQ 0x114 +#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0) + +#define PRCM_PLLARM_ENABLE 0x98 +#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE BIT(0) +#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON BIT(8) + +#define PRCM_ARMCLKFIX_MGT 0x0 +#define PRCM_A9_RESETN_CLR 0x1f4 +#define PRCM_A9_RESETN_SET 0x1f0 +#define PRCM_ARM_LS_CLAMP 0x30C +#define PRCM_SRAM_A9 0x308 /* ARM WFI Standby signal register */ -#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) -#define PRCMU_IOCR (_PRCMU_BASE + 0x310) +#define PRCM_ARM_WFI_STANDBY 0x130 +#define PRCM_IOCR 0x310 +#define PRCM_IOCR_IOFORCE BIT(0) /* CPU mailbox registers */ -#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) -#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) -#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) +#define PRCM_MBOX_CPU_VAL 0x0FC +#define PRCM_MBOX_CPU_SET 0x100 /* Dual A9 core interrupt management unit registers */ -#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) -#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) -#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) -#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) -#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) -#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) -#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) -#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) -#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) -#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) -#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) - -#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) -#define ARM_WAKEUP_MODEM 0x1 - -#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) -#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) -#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) - -#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) -#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) -#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) -#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) -#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) -#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) -#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) -#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) +#define PRCM_A9_MASK_REQ 0x328 +#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0) + +#define PRCM_A9_MASK_ACK 0x32C +#define PRCM_ARMITMSK31TO0 0x11C +#define PRCM_ARMITMSK63TO32 0x120 +#define PRCM_ARMITMSK95TO64 0x124 +#define PRCM_ARMITMSK127TO96 0x128 +#define PRCM_POWER_STATE_VAL 0x25C +#define PRCM_ARMITVAL31TO0 0x260 +#define PRCM_ARMITVAL63TO32 0x264 +#define PRCM_ARMITVAL95TO64 0x268 +#define PRCM_ARMITVAL127TO96 0x26C + +#define PRCM_HOSTACCESS_REQ 0x334 +#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0) + +#define PRCM_ARM_IT1_CLR 0x48C +#define PRCM_ARM_IT1_VAL 0x494 + +#define PRCM_ITSTATUS0 0x148 +#define PRCM_ITSTATUS1 0x150 +#define PRCM_ITSTATUS2 0x158 +#define PRCM_ITSTATUS3 0x160 +#define PRCM_ITSTATUS4 0x168 +#define PRCM_ITSTATUS5 0x484 +#define PRCM_ITCLEAR5 0x488 +#define PRCM_ARMIT_MASKXP70_IT 0x1018 /* System reset register */ -#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) +#define PRCM_APE_SOFTRST 0x228 /* Level shifter and clamp control registers */ -#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) -#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) +#define PRCM_MMIP_LS_CLAMP_SET 0x420 +#define PRCM_MMIP_LS_CLAMP_CLR 0x424 + +/* PRCMU HW semaphore */ +#define PRCM_SEM 0x400 +#define PRCM_SEM_PRCM_SEM BIT(0) /* PRCMU clock/PLL/reset registers */ -#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) -#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) -#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) -#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) -#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) -#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) +#define PRCM_PLLDSI_FREQ 0x500 +#define PRCM_PLLDSI_ENABLE 0x504 +#define PRCM_PLLDSI_LOCKP 0x508 +#define PRCM_DSI_PLLOUT_SEL 0x530 +#define PRCM_DSITVCLK_DIV 0x52C +#define PRCM_APE_RESETN_SET 0x1E4 +#define PRCM_APE_RESETN_CLR 0x1E8 + +#define PRCM_TCR 0x1C8 +#define PRCM_TCR_TENSEL_MASK BITS(0, 7) +#define PRCM_TCR_STOP_TIMERS BIT(16) +#define PRCM_TCR_DOZE_MODE BIT(17) + +#define PRCM_CLKOCR 0x1CC +#define PRCM_CLKOCR_CLKODIV0_SHIFT 0 +#define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5) +#define PRCM_CLKOCR_CLKOSEL0_SHIFT 6 +#define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8) +#define PRCM_CLKOCR_CLKODIV1_SHIFT 16 +#define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21) +#define PRCM_CLKOCR_CLKOSEL1_SHIFT 22 +#define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24) +#define PRCM_CLKOCR_CLK1TYPE BIT(28) + +#define PRCM_SGACLK_MGT 0x014 +#define PRCM_UARTCLK_MGT 0x018 +#define PRCM_MSP02CLK_MGT 0x01C +#define PRCM_MSP1CLK_MGT 0x288 +#define PRCM_I2CCLK_MGT 0x020 +#define PRCM_SDMMCCLK_MGT 0x024 +#define PRCM_SLIMCLK_MGT 0x028 +#define PRCM_PER1CLK_MGT 0x02C +#define PRCM_PER2CLK_MGT 0x030 +#define PRCM_PER3CLK_MGT 0x034 +#define PRCM_PER5CLK_MGT 0x038 +#define PRCM_PER6CLK_MGT 0x03C +#define PRCM_PER7CLK_MGT 0x040 +#define PRCM_LCDCLK_MGT 0x044 +#define PRCM_BMLCLK_MGT 0x04C +#define PRCM_HSITXCLK_MGT 0x050 +#define PRCM_HSIRXCLK_MGT 0x054 +#define PRCM_HDMICLK_MGT 0x058 +#define PRCM_APEATCLK_MGT 0x05C +#define PRCM_APETRACECLK_MGT 0x060 +#define PRCM_MCDECLK_MGT 0x064 +#define PRCM_IPI2CCLK_MGT 0x068 +#define PRCM_DSIALTCLK_MGT 0x06C +#define PRCM_DMACLK_MGT 0x074 +#define PRCM_B2R2CLK_MGT 0x078 +#define PRCM_TVCLK_MGT 0x07C +#define PRCM_UNIPROCLK_MGT 0x278 +#define PRCM_SSPCLK_MGT 0x280 +#define PRCM_RNGCLK_MGT 0x284 +#define PRCM_UICCCLK_MGT 0x27C + +#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) +#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) +#define PRCM_CLK_MGT_CLKEN BIT(8) /* ePOD and memory power signal control registers */ -#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) -#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) +#define PRCM_EPOD_C_SET 0x410 +#define PRCM_SRAM_LS_SLEEP 0x304 /* Debug power control unit registers */ -#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) +#define PRCM_POWER_STATE_SET 0x254 /* Miscellaneous unit registers */ -#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) +#define PRCM_DSI_SW_RESET 0x324 +#define PRCM_GPIOCR 0x138 + +/* GPIOCR register */ +#define PRCM_GPIOCR_SPI2_SELECT BIT(23) + +#define PRCM_DDR_SUBSYS_APE_MINBW 0x438 -#endif /* __MACH_PRCMU_REGS_H */ +#endif /* __DB8500_PRCMU_REGS_H */ diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 31f18c8c6bf8..c44725bd8b9a 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -10,94 +10,1355 @@ * U8500 PRCM Unit interface driver * */ -#include <linux/kernel.h> #include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> #include <linux/errno.h> #include <linux/err.h> +#include <linux/spinlock.h> #include <linux/io.h> +#include <linux/slab.h> #include <linux/mutex.h> #include <linux/completion.h> +#include <linux/irq.h> #include <linux/jiffies.h> #include <linux/bitops.h> -#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/mfd/core.h> #include <linux/mfd/db8500-prcmu.h> - #include <mach/hardware.h> - +#include <mach/irqs.h> +#include <mach/db8500-regs.h> +#include <mach/id.h> #include "db8500-prcmu-regs.h" -/* Global var to runtime determine TCDM base for v2 or v1 */ -static __iomem void *tcdm_base; +/* Offset for the firmware version within the TCPM */ +#define PRCMU_FW_VERSION_OFFSET 0xA4 -#define _MBOX_HEADER (tcdm_base + 0xFE8) -#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) +/* PRCMU project numbers, defined by PRCMU FW */ +#define PRCMU_PROJECT_ID_8500V1_0 1 +#define PRCMU_PROJECT_ID_8500V2_0 2 +#define PRCMU_PROJECT_ID_8400V2_0 3 -#define REQ_MB1 (tcdm_base + 0xFD0) -#define REQ_MB5 (tcdm_base + 0xE44) +/* Index of different voltages to be used when accessing AVSData */ +#define PRCM_AVS_BASE 0x2FC +#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) +#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1) +#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2) +#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3) +#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4) +#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5) +#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6) +#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7) +#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8) +#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9) +#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA) +#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB) +#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC) -#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) -#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) -#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) +#define PRCM_AVS_VOLTAGE 0 +#define PRCM_AVS_VOLTAGE_MASK 0x3f +#define PRCM_AVS_ISSLOWSTARTUP 6 +#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP) +#define PRCM_AVS_ISMODEENABLE 7 +#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) -#define ACK_MB1 (tcdm_base + 0xE04) -#define ACK_MB5 (tcdm_base + 0xDF4) +#define PRCM_BOOT_STATUS 0xFFF +#define PRCM_ROMCODE_A2P 0xFFE +#define PRCM_ROMCODE_P2A 0xFFD +#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */ -#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) -#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) +#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */ -#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) -#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) -#define REQ_MB5_I2C_REG (REQ_MB5 + 2) -#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) +#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */ +#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0) +#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1) +#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2) +#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3) +#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4) +#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5) +#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8) -#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) -#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) +/* Req Mailboxes */ +#define PRCM_REQ_MB0 0xFDC /* 12 bytes */ +#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */ +#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */ +#define PRCM_REQ_MB3 0xE4C /* 372 bytes */ +#define PRCM_REQ_MB4 0xE48 /* 4 bytes */ +#define PRCM_REQ_MB5 0xE44 /* 4 bytes */ -#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) -#define PRCM_AVS_ISMODEENABLE 7 -#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) +/* Ack Mailboxes */ +#define PRCM_ACK_MB0 0xE08 /* 52 bytes */ +#define PRCM_ACK_MB1 0xE04 /* 4 bytes */ +#define PRCM_ACK_MB2 0xE00 /* 4 bytes */ +#define PRCM_ACK_MB3 0xDFC /* 4 bytes */ +#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */ +#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */ + +/* Mailbox 0 headers */ +#define MB0H_POWER_STATE_TRANS 0 +#define MB0H_CONFIG_WAKEUPS_EXE 1 +#define MB0H_READ_WAKEUP_ACK 3 +#define MB0H_CONFIG_WAKEUPS_SLEEP 4 + +#define MB0H_WAKEUP_EXE 2 +#define MB0H_WAKEUP_SLEEP 5 + +/* Mailbox 0 REQs */ +#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0) +#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1) +#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2) +#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3) +#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4) +#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8) + +/* Mailbox 0 ACKs */ +#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0) +#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1) +#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4) +#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8) +#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C) +#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20) +#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20 + +/* Mailbox 1 headers */ +#define MB1H_ARM_APE_OPP 0x0 +#define MB1H_RESET_MODEM 0x2 +#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3 +#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4 +#define MB1H_RELEASE_USB_WAKEUP 0x5 + +/* Mailbox 1 Requests */ +#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) +#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) +#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4) +#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8) + +/* Mailbox 1 ACKs */ +#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0) +#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1) +#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2) +#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3) + +/* Mailbox 2 headers */ +#define MB2H_DPS 0x0 +#define MB2H_AUTO_PWR 0x1 + +/* Mailbox 2 REQs */ +#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0) +#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1) +#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2) +#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3) +#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4) +#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5) +#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6) +#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7) +#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8) +#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC) -#define I2C_WRITE(slave) \ +/* Mailbox 2 ACKs */ +#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0) +#define HWACC_PWR_ST_OK 0xFE + +/* Mailbox 3 headers */ +#define MB3H_ANC 0x0 +#define MB3H_SIDETONE 0x1 +#define MB3H_SYSCLK 0xE + +/* Mailbox 3 Requests */ +#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0) +#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20) +#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60) +#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64) +#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68) +#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C) +#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C) + +/* Mailbox 4 headers */ +#define MB4H_DDR_INIT 0x0 +#define MB4H_MEM_ST 0x1 +#define MB4H_HOTDOG 0x12 +#define MB4H_HOTMON 0x13 +#define MB4H_HOT_PERIOD 0x14 + +/* Mailbox 4 Requests */ +#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3) +#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0) +#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1) +#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2) +#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0) +#define HOTMON_CONFIG_LOW BIT(0) +#define HOTMON_CONFIG_HIGH BIT(1) + +/* Mailbox 5 Requests */ +#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0) +#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1) +#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2) +#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3) +#define PRCMU_I2C_WRITE(slave) \ (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define I2C_READ(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) -#define I2C_STOP_EN BIT(3) - -enum mb1_h { - MB1H_ARM_OPP = 1, - MB1H_APE_OPP, - MB1H_ARM_APE_OPP, +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_STOP_EN BIT(3) + +/* Mailbox 5 ACKs */ +#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1) +#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3) +#define I2C_WR_OK 0x1 +#define I2C_RD_OK 0x2 + +#define NUM_MB 8 +#define MBOX_BIT BIT +#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1) + +/* + * Wakeups/IRQs + */ + +#define WAKEUP_BIT_RTC BIT(0) +#define WAKEUP_BIT_RTT0 BIT(1) +#define WAKEUP_BIT_RTT1 BIT(2) +#define WAKEUP_BIT_HSI0 BIT(3) +#define WAKEUP_BIT_HSI1 BIT(4) +#define WAKEUP_BIT_CA_WAKE BIT(5) +#define WAKEUP_BIT_USB BIT(6) +#define WAKEUP_BIT_ABB BIT(7) +#define WAKEUP_BIT_ABB_FIFO BIT(8) +#define WAKEUP_BIT_SYSCLK_OK BIT(9) +#define WAKEUP_BIT_CA_SLEEP BIT(10) +#define WAKEUP_BIT_AC_WAKE_ACK BIT(11) +#define WAKEUP_BIT_SIDE_TONE_OK BIT(12) +#define WAKEUP_BIT_ANC_OK BIT(13) +#define WAKEUP_BIT_SW_ERROR BIT(14) +#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15) +#define WAKEUP_BIT_ARM BIT(17) +#define WAKEUP_BIT_HOTMON_LOW BIT(18) +#define WAKEUP_BIT_HOTMON_HIGH BIT(19) +#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20) +#define WAKEUP_BIT_GPIO0 BIT(23) +#define WAKEUP_BIT_GPIO1 BIT(24) +#define WAKEUP_BIT_GPIO2 BIT(25) +#define WAKEUP_BIT_GPIO3 BIT(26) +#define WAKEUP_BIT_GPIO4 BIT(27) +#define WAKEUP_BIT_GPIO5 BIT(28) +#define WAKEUP_BIT_GPIO6 BIT(29) +#define WAKEUP_BIT_GPIO7 BIT(30) +#define WAKEUP_BIT_GPIO8 BIT(31) + +/* + * This vector maps irq numbers to the bits in the bit field used in + * communication with the PRCMU firmware. + * + * The reason for having this is to keep the irq numbers contiguous even though + * the bits in the bit field are not. (The bits also have a tendency to move + * around, to further complicate matters.) + */ +#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE) +#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name) +static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = { + IRQ_ENTRY(RTC), + IRQ_ENTRY(RTT0), + IRQ_ENTRY(RTT1), + IRQ_ENTRY(HSI0), + IRQ_ENTRY(HSI1), + IRQ_ENTRY(CA_WAKE), + IRQ_ENTRY(USB), + IRQ_ENTRY(ABB), + IRQ_ENTRY(ABB_FIFO), + IRQ_ENTRY(CA_SLEEP), + IRQ_ENTRY(ARM), + IRQ_ENTRY(HOTMON_LOW), + IRQ_ENTRY(HOTMON_HIGH), + IRQ_ENTRY(MODEM_SW_RESET_REQ), + IRQ_ENTRY(GPIO0), + IRQ_ENTRY(GPIO1), + IRQ_ENTRY(GPIO2), + IRQ_ENTRY(GPIO3), + IRQ_ENTRY(GPIO4), + IRQ_ENTRY(GPIO5), + IRQ_ENTRY(GPIO6), + IRQ_ENTRY(GPIO7), + IRQ_ENTRY(GPIO8) +}; + +#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1) +#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name) +static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = { + WAKEUP_ENTRY(RTC), + WAKEUP_ENTRY(RTT0), + WAKEUP_ENTRY(RTT1), + WAKEUP_ENTRY(HSI0), + WAKEUP_ENTRY(HSI1), + WAKEUP_ENTRY(USB), + WAKEUP_ENTRY(ABB), + WAKEUP_ENTRY(ABB_FIFO), + WAKEUP_ENTRY(ARM) }; +/* + * mb0_transfer - state needed for mailbox 0 communication. + * @lock: The transaction lock. + * @dbb_events_lock: A lock used to handle concurrent access to (parts of) + * the request data. + * @mask_work: Work structure used for (un)masking wakeup interrupts. + * @req: Request data that need to persist between requests. + */ +static struct { + spinlock_t lock; + spinlock_t dbb_irqs_lock; + struct work_struct mask_work; + struct mutex ac_wake_lock; + struct completion ac_wake_work; + struct { + u32 dbb_irqs; + u32 dbb_wakeups; + u32 abb_events; + } req; +} mb0_transfer; + +/* + * mb1_transfer - state needed for mailbox 1 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ static struct { struct mutex lock; struct completion work; struct { + u8 header; u8 arm_opp; u8 ape_opp; - u8 arm_status; - u8 ape_status; + u8 ape_voltage_status; } ack; } mb1_transfer; -enum ack_mb5_status { - I2C_WR_OK = 0x01, - I2C_RD_OK = 0x02, -}; +/* + * mb2_transfer - state needed for mailbox 2 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @auto_pm_lock: The autonomous power management configuration lock. + * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled. + * @req: Request data that need to persist between requests. + * @ack: Reply ("acknowledge") data. + */ +static struct { + struct mutex lock; + struct completion work; + spinlock_t auto_pm_lock; + bool auto_pm_enabled; + struct { + u8 status; + } ack; +} mb2_transfer; -#define MBOX_BIT BIT -#define NUM_MBOX 8 +/* + * mb3_transfer - state needed for mailbox 3 communication. + * @lock: The request lock. + * @sysclk_lock: A lock used to handle concurrent sysclk requests. + * @sysclk_work: Work structure used for sysclk requests. + */ +static struct { + spinlock_t lock; + struct mutex sysclk_lock; + struct completion sysclk_work; +} mb3_transfer; +/* + * mb4_transfer - state needed for mailbox 4 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + */ +static struct { + struct mutex lock; + struct completion work; +} mb4_transfer; + +/* + * mb5_transfer - state needed for mailbox 5 communication. + * @lock: The transaction lock. + * @work: The transaction completion structure. + * @ack: Reply ("acknowledge") data. + */ static struct { struct mutex lock; struct completion work; - bool failed; struct { u8 status; u8 value; } ack; } mb5_transfer; +static atomic_t ac_wake_req_state = ATOMIC_INIT(0); + +/* Spinlocks */ +static DEFINE_SPINLOCK(clkout_lock); +static DEFINE_SPINLOCK(gpiocr_lock); + +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; + +struct clk_mgt { + unsigned int offset; + u32 pllsw; +}; + +static DEFINE_SPINLOCK(clk_mgt_lock); + +#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 } +struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { + CLK_MGT_ENTRY(SGACLK), + CLK_MGT_ENTRY(UARTCLK), + CLK_MGT_ENTRY(MSP02CLK), + CLK_MGT_ENTRY(MSP1CLK), + CLK_MGT_ENTRY(I2CCLK), + CLK_MGT_ENTRY(SDMMCCLK), + CLK_MGT_ENTRY(SLIMCLK), + CLK_MGT_ENTRY(PER1CLK), + CLK_MGT_ENTRY(PER2CLK), + CLK_MGT_ENTRY(PER3CLK), + CLK_MGT_ENTRY(PER5CLK), + CLK_MGT_ENTRY(PER6CLK), + CLK_MGT_ENTRY(PER7CLK), + CLK_MGT_ENTRY(LCDCLK), + CLK_MGT_ENTRY(BMLCLK), + CLK_MGT_ENTRY(HSITXCLK), + CLK_MGT_ENTRY(HSIRXCLK), + CLK_MGT_ENTRY(HDMICLK), + CLK_MGT_ENTRY(APEATCLK), + CLK_MGT_ENTRY(APETRACECLK), + CLK_MGT_ENTRY(MCDECLK), + CLK_MGT_ENTRY(IPI2CCLK), + CLK_MGT_ENTRY(DSIALTCLK), + CLK_MGT_ENTRY(DMACLK), + CLK_MGT_ENTRY(B2R2CLK), + CLK_MGT_ENTRY(TVCLK), + CLK_MGT_ENTRY(SSPCLK), + CLK_MGT_ENTRY(RNGCLK), + CLK_MGT_ENTRY(UICCCLK), +}; + +/* +* Used by MCDE to setup all necessary PRCMU registers +*/ +#define PRCMU_RESET_DSIPLL 0x00004000 +#define PRCMU_UNCLAMP_DSIPLL 0x00400800 + +#define PRCMU_CLK_PLL_DIV_SHIFT 0 +#define PRCMU_CLK_PLL_SW_SHIFT 5 +#define PRCMU_CLK_38 (1 << 9) +#define PRCMU_CLK_38_SRC (1 << 10) +#define PRCMU_CLK_38_DIV (1 << 11) + +/* PLLDIV=12, PLLSW=4 (PLLDDR) */ +#define PRCMU_DSI_CLOCK_SETTING 0x0000008C + +/* PLLDIV=8, PLLSW=4 (PLLDDR) */ +#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088 + +/* DPI 50000000 Hz */ +#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \ + (16 << PRCMU_CLK_PLL_DIV_SHIFT)) +#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00 + +/* D=101, N=1, R=4, SELDIV2=0 */ +#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165 + +/* D=70, N=1, R=3, SELDIV2=0 */ +#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146 + +#define PRCMU_ENABLE_PLLDSI 0x00000001 +#define PRCMU_DISABLE_PLLDSI 0x00000000 +#define PRCMU_RELEASE_RESET_DSS 0x0000400C +#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202 +/* ESC clk, div0=1, div1=1, div2=3 */ +#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101 +#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101 +#define PRCMU_DSI_RESET_SW 0x00000007 + +#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 + +static struct { + u8 project_number; + u8 api_version; + u8 func_version; + u8 errata; +} prcmu_version; + + +int prcmu_enable_dsipll(void) +{ + int i; + unsigned int plldsifreq; + + /* Clear DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR)); + /* Unclamp DSIPLL in/out */ + writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR)); + + if (prcmu_is_u8400()) + plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; + else + plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; + /* Set DSI PLL FREQ */ + writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ)); + writel(PRCMU_DSI_PLLOUT_SEL_SETTING, + (_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL)); + /* Enable Escape clocks */ + writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, + (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + + /* Start DSI PLL */ + writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + /* Reset DSI PLL */ + writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET)); + for (i = 0; i < 10; i++) { + if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) & + PRCMU_PLLDSI_LOCKP_LOCKED) + == PRCMU_PLLDSI_LOCKP_LOCKED) + break; + udelay(100); + } + /* Set DSIPLL_RESETN */ + writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET)); + return 0; +} + +int prcmu_disable_dsipll(void) +{ + /* Disable dsi pll */ + writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE)); + /* Disable escapeclock */ + writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, + (_PRCMU_BASE + PRCM_DSITVCLK_DIV)); + return 0; +} + +int prcmu_set_display_clocks(void) +{ + unsigned long flags; + unsigned int dsiclk; + + if (prcmu_is_u8400()) + dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400; + else + dsiclk = PRCMU_DSI_CLOCK_SETTING; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT)); + writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT)); + writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. + */ +void prcmu_enable_spi2(void) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpiocr_lock, flags); + reg = readl(_PRCMU_BASE + PRCM_GPIOCR); + writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + spin_unlock_irqrestore(&gpiocr_lock, flags); +} + +/** + * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. + */ +void prcmu_disable_spi2(void) +{ + u32 reg; + unsigned long flags; + + spin_lock_irqsave(&gpiocr_lock, flags); + reg = readl(_PRCMU_BASE + PRCM_GPIOCR); + writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR); + spin_unlock_irqrestore(&gpiocr_lock, flags); +} + +bool prcmu_has_arm_maxopp(void) +{ + return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & + PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; +} + +bool prcmu_is_u8400(void) +{ + return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0; +} + +/** + * prcmu_get_boot_status - PRCMU boot status checking + * Returns: the current PRCMU boot status + */ +int prcmu_get_boot_status(void) +{ + return readb(tcdm_base + PRCM_BOOT_STATUS); +} + +/** + * prcmu_set_rc_a2p - This function is used to run few power state sequences + * @val: Value to be set, i.e. transition requested + * Returns: 0 on success, -EINVAL on invalid argument + * + * This function is used to run the following power state sequences - + * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep + */ +int prcmu_set_rc_a2p(enum romcode_write val) +{ + if (val < RDY_2_DS || val > RDY_2_XP70_RST) + return -EINVAL; + writeb(val, (tcdm_base + PRCM_ROMCODE_A2P)); + return 0; +} + +/** + * prcmu_get_rc_p2a - This function is used to get power state sequences + * Returns: the power transition that has last happened + * + * This function can return the following transitions- + * any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep + */ +enum romcode_read prcmu_get_rc_p2a(void) +{ + return readb(tcdm_base + PRCM_ROMCODE_P2A); +} + +/** + * prcmu_get_current_mode - Return the current XP70 power mode + * Returns: Returns the current AP(ARM) power mode: init, + * apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset + */ +enum ap_pwrst prcmu_get_xp70_current_state(void) +{ + return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE); +} + +/** + * prcmu_config_clkout - Configure one of the programmable clock outputs. + * @clkout: The CLKOUT number (0 or 1). + * @source: The clock to be used (one of the PRCMU_CLKSRC_*). + * @div: The divider to be applied. + * + * Configures one of the programmable clock outputs (CLKOUTs). + * @div should be in the range [1,63] to request a configuration, or 0 to + * inform that the configuration is no longer requested. + */ +int prcmu_config_clkout(u8 clkout, u8 source, u8 div) +{ + static int requests[2]; + int r = 0; + unsigned long flags; + u32 val; + u32 bits; + u32 mask; + u32 div_mask; + + BUG_ON(clkout > 1); + BUG_ON(div > 63); + BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009)); + + if (!div && !requests[clkout]) + return -EINVAL; + + switch (clkout) { + case 0: + div_mask = PRCM_CLKOCR_CLKODIV0_MASK; + mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK); + bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) | + (div << PRCM_CLKOCR_CLKODIV0_SHIFT)); + break; + case 1: + div_mask = PRCM_CLKOCR_CLKODIV1_MASK; + mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK | + PRCM_CLKOCR_CLK1TYPE); + bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) | + (div << PRCM_CLKOCR_CLKODIV1_SHIFT)); + break; + } + bits &= mask; + + spin_lock_irqsave(&clkout_lock, flags); + + val = readl(_PRCMU_BASE + PRCM_CLKOCR); + if (val & div_mask) { + if (div) { + if ((val & mask) != bits) { + r = -EBUSY; + goto unlock_and_return; + } + } else { + if ((val & mask & ~div_mask) != bits) { + r = -EINVAL; + goto unlock_and_return; + } + } + } + writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR)); + requests[clkout] += (div ? 1 : -1); + +unlock_and_return: + spin_unlock_irqrestore(&clkout_lock, flags); + + return r; +} + +int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) +{ + unsigned long flags; + + BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state)); + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE)); + writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE)); + writeb((keep_ulp_clk ? 1 : 0), + (tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE)); + writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); + + return 0; +} + +/* This function should only be called while mb0_transfer.lock is held. */ +static void config_wakeups(void) +{ + const u8 header[2] = { + MB0H_CONFIG_WAKEUPS_EXE, + MB0H_CONFIG_WAKEUPS_SLEEP + }; + static u32 last_dbb_events; + static u32 last_abb_events; + u32 dbb_events; + u32 abb_events; + unsigned int i; + + dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups; + dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK); + + abb_events = mb0_transfer.req.abb_events; + + if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events)) + return; + + for (i = 0; i < 2; i++) { + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500)); + writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500)); + writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + } + last_dbb_events = dbb_events; + last_abb_events = abb_events; +} + +void prcmu_enable_wakeups(u32 wakeups) +{ + unsigned long flags; + u32 bits; + int i; + + BUG_ON(wakeups != (wakeups & VALID_WAKEUPS)); + + for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) { + if (wakeups & BIT(i)) + bits |= prcmu_wakeup_bit[i]; + } + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + mb0_transfer.req.dbb_wakeups = bits; + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +void prcmu_config_abb_event_readout(u32 abb_events) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + mb0_transfer.req.abb_events = abb_events; + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +void prcmu_get_abb_event_buffer(void __iomem **buf) +{ + if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) + *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500); + else + *buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500); +} + +/** + * prcmu_set_arm_opp - set the appropriate ARM OPP + * @opp: The new ARM operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the the operating point of the ARM. + */ +int prcmu_set_arm_opp(u8 opp) +{ + int r; + + if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK) + return -EINVAL; + + r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); + writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || + (mb1_transfer.ack.arm_opp != opp)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_get_arm_opp - get the current ARM OPP + * + * Returns: the current ARM OPP + */ +int prcmu_get_arm_opp(void) +{ + return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP); +} + +/** + * prcmu_get_ddr_opp - get the current DDR OPP + * + * Returns: the current DDR OPP + */ +int prcmu_get_ddr_opp(void) +{ + return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW); +} + +/** + * set_ddr_opp - set the appropriate DDR OPP + * @opp: The new DDR operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the operating point of the DDR. + */ +int prcmu_set_ddr_opp(u8 opp) +{ + if (opp < DDR_100_OPP || opp > DDR_25_OPP) + return -EINVAL; + /* Changing the DDR OPP can hang the hardware pre-v21 */ + if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20()) + writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW)); + + return 0; +} +/** + * set_ape_opp - set the appropriate APE OPP + * @opp: The new APE operating point to which transition is to be made + * Returns: 0 on success, non-zero on failure + * + * This function sets the operating point of the APE. + */ +int prcmu_set_ape_opp(u8 opp) +{ + int r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); + writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) || + (mb1_transfer.ack.ape_opp != opp)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_get_ape_opp - get the current APE OPP + * + * Returns: the current APE OPP + */ +int prcmu_get_ape_opp(void) +{ + return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP); +} + +/** + * prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage + * @enable: true to request the higher voltage, false to drop a request. + * + * Calls to this function to enable and disable requests must be balanced. + */ +int prcmu_request_ape_opp_100_voltage(bool enable) +{ + int r = 0; + u8 header; + static unsigned int requests; + + mutex_lock(&mb1_transfer.lock); + + if (enable) { + if (0 != requests++) + goto unlock_and_return; + header = MB1H_REQUEST_APE_OPP_100_VOLT; + } else { + if (requests == 0) { + r = -EIO; + goto unlock_and_return; + } else if (1 != requests--) { + goto unlock_and_return; + } + header = MB1H_RELEASE_APE_OPP_100_VOLT; + } + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != header) || + ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0)) + r = -EIO; + +unlock_and_return: + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_release_usb_wakeup_state - release the state required by a USB wakeup + * + * This function releases the power state requirements of a USB wakeup. + */ +int prcmu_release_usb_wakeup_state(void) +{ + int r = 0; + + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_RELEASE_USB_WAKEUP, + (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) || + ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0)) + r = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return r; +} + +/** + * prcmu_set_epod - set the state of a EPOD (power domain) + * @epod_id: The EPOD to set + * @epod_state: The new EPOD state + * + * This function sets the state of a EPOD (power domain). It may not be called + * from interrupt context. + */ +int prcmu_set_epod(u16 epod_id, u8 epod_state) +{ + int r = 0; + bool ram_retention = false; + int i; + + /* check argument */ + BUG_ON(epod_id >= NUM_EPOD_ID); + + /* set flag if retention is possible */ + switch (epod_id) { + case EPOD_ID_SVAMMDSP: + case EPOD_ID_SIAMMDSP: + case EPOD_ID_ESRAM12: + case EPOD_ID_ESRAM34: + ram_retention = true; + break; + } + + /* check argument */ + BUG_ON(epod_state > EPOD_STATE_ON); + BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention); + + /* get lock */ + mutex_lock(&mb2_transfer.lock); + + /* wait for mailbox */ + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2)) + cpu_relax(); + + /* fill in mailbox */ + for (i = 0; i < NUM_EPOD_ID; i++) + writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i)); + writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id)); + + writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2)); + + writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + /* + * The current firmware version does not handle errors correctly, + * and we cannot recover if there is an error. + * This is expected to change when the firmware is updated. + */ + if (!wait_for_completion_timeout(&mb2_transfer.work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + goto unlock_and_return; + } + + if (mb2_transfer.ack.status != HWACC_PWR_ST_OK) + r = -EIO; + +unlock_and_return: + mutex_unlock(&mb2_transfer.lock); + return r; +} + +/** + * prcmu_configure_auto_pm - Configure autonomous power management. + * @sleep: Configuration for ApSleep. + * @idle: Configuration for ApIdle. + */ +void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle) +{ + u32 sleep_cfg; + u32 idle_cfg; + unsigned long flags; + + BUG_ON((sleep == NULL) || (idle == NULL)); + + sleep_cfg = (sleep->sva_auto_pm_enable & 0xF); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF)); + sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF)); + sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF)); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF)); + sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF)); + + idle_cfg = (idle->sva_auto_pm_enable & 0xF); + idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF)); + idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF)); + idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF)); + idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF)); + idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF)); + + spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags); + + /* + * The autonomous power management configuration is done through + * fields in mailbox 2, but these fields are only used as shared + * variables - i.e. there is no need to send a message. + */ + writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP)); + writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE)); + + mb2_transfer.auto_pm_enabled = + ((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) || + (idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON)); + + spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags); +} +EXPORT_SYMBOL(prcmu_configure_auto_pm); + +bool prcmu_is_auto_pm_enabled(void) +{ + return mb2_transfer.auto_pm_enabled; +} + +static int request_sysclk(bool enable) +{ + int r; + unsigned long flags; + + r = 0; + + mutex_lock(&mb3_transfer.sysclk_lock); + + spin_lock_irqsave(&mb3_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3)) + cpu_relax(); + + writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT)); + + writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3)); + writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb3_transfer.lock, flags); + + /* + * The firmware only sends an ACK if we want to enable the + * SysClk, and it succeeds. + */ + if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + r = -EIO; + } + + mutex_unlock(&mb3_transfer.sysclk_lock); + + return r; +} + +static int request_timclk(bool enable) +{ + u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK); + + if (!enable) + val |= PRCM_TCR_STOP_TIMERS; + writel(val, (_PRCMU_BASE + PRCM_TCR)); + + return 0; +} + +static int request_reg_clock(u8 clock, bool enable) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + if (enable) { + val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw); + } else { + clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); + val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK); + } + writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + +/** + * prcmu_request_clock() - Request for a clock to be enabled or disabled. + * @clock: The clock for which the request is made. + * @enable: Whether the clock should be enabled (true) or disabled (false). + * + * This function should only be used by the clock implementation. + * Do not use it from any other place! + */ +int prcmu_request_clock(u8 clock, bool enable) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return request_reg_clock(clock, enable); + else if (clock == PRCMU_TIMCLK) + return request_timclk(enable); + else if (clock == PRCMU_SYSCLK) + return request_sysclk(enable); + else + return -EINVAL; +} + +int prcmu_config_esram0_deep_sleep(u8 state) +{ + if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) || + (state < ESRAM0_DEEP_SLEEP_STATE_OFF)) + return -EINVAL; + + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON), + (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE)); + writeb(DDR_PWR_STATE_ON, + (tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE)); + writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_config_hotdog(u8 threshold) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD)); + writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_config_hotmon(u8 low, u8 high) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW)); + writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH)); + writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH), + (tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG)); + writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +static int config_hot_period(u16 val) +{ + mutex_lock(&mb4_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4)) + cpu_relax(); + + writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD)); + writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4)); + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb4_transfer.work); + + mutex_unlock(&mb4_transfer.lock); + + return 0; +} + +int prcmu_start_temp_sense(u16 cycles32k) +{ + if (cycles32k == 0xFFFF) + return -EINVAL; + + return config_hot_period(cycles32k); +} + +int prcmu_stop_temp_sense(void) +{ + return config_hot_period(0xFFFF); +} + +/** + * prcmu_set_clock_divider() - Configure the clock divider. + * @clock: The clock for which the request is made. + * @divider: The clock divider. (< 32) + * + * This function should only be used by the clock implementation. + * Do not use it from any other place! + */ +int prcmu_set_clock_divider(u8 clock, u8 divider) +{ + u32 val; + unsigned long flags; + + if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider)) + return -EINVAL; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK); + val |= (u32)divider; + writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + + /* Release the HW semaphore. */ + writel(0, (_PRCMU_BASE + PRCM_SEM)); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); + + return 0; +} + /** * prcmu_abb_read() - Read register value(s) from the ABB. * @slave: The I2C slave address. @@ -115,33 +1376,34 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) if (size != 1) return -EINVAL; - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; + mutex_lock(&mb5_transfer.lock); - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); - writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); + writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); + writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); + writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); + writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); + + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_read timed out.\n"); + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); r = -EIO; - goto unlock_and_return; + } else { + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); } - r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) *value = mb5_transfer.ack.value; -unlock_and_return: mutex_unlock(&mb5_transfer.lock); + return r; } -EXPORT_SYMBOL(prcmu_abb_read); /** * prcmu_abb_write() - Write register value(s) to the ABB. @@ -160,179 +1422,262 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) if (size != 1) return -EINVAL; - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - + mutex_lock(&mb5_transfer.lock); - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); - writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - writeb(*value, REQ_MB5_I2C_VAL); + writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); + writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); + writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); + writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL)); + + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_write timed out.\n"); + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); r = -EIO; - goto unlock_and_return; + } else { + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); } - r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); -unlock_and_return: mutex_unlock(&mb5_transfer.lock); + return r; } -EXPORT_SYMBOL(prcmu_abb_write); -static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) +/** + * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem + */ +void prcmu_ac_wake_req(void) { - bool do_ape; - bool do_arm; - int err = 0; + u32 val; - do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); - do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); + mutex_lock(&mb0_transfer.ac_wake_lock); - mutex_lock(&mb1_transfer.lock); + val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ) + goto unlock_and_return; - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) - cpu_relax(); + atomic_set(&ac_wake_req_state, 1); - writeb(0, MBOX_HEADER_REQ_MB0); - writeb(cpu_opp, REQ_MB1_ARMOPP); - writeb(ape_opp, REQ_MB1_APEOPP); - writeb(0, REQ_MB1_BOOSTOPP); - writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb1_transfer.work); - if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) - err = -EIO; - if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) - err = -EIO; + writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), + (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); - mutex_unlock(&mb1_transfer.lock); + if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + } - return err; +unlock_and_return: + mutex_unlock(&mb0_transfer.ac_wake_lock); } /** - * prcmu_set_ape_opp() - Set the OPP of the APE. - * @opp: The OPP to set. - * - * This function sets the OPP of the APE. + * prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem */ -int prcmu_set_ape_opp(enum prcmu_ape_opp opp) +void prcmu_ac_sleep_req() { - return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); + u32 val; + + mutex_lock(&mb0_transfer.ac_wake_lock); + + val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ); + if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)) + goto unlock_and_return; + + writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), + (_PRCMU_BASE + PRCM_HOSTACCESS_REQ)); + + if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work, + msecs_to_jiffies(20000))) { + pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n", + __func__); + } + + atomic_set(&ac_wake_req_state, 0); + +unlock_and_return: + mutex_unlock(&mb0_transfer.ac_wake_lock); } -EXPORT_SYMBOL(prcmu_set_ape_opp); -/** - * prcmu_set_cpu_opp() - Set the OPP of the CPU. - * @opp: The OPP to set. - * - * This function sets the OPP of the CPU. - */ -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) +bool prcmu_is_ac_wake_requested(void) { - return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); + return (atomic_read(&ac_wake_req_state) != 0); } -EXPORT_SYMBOL(prcmu_set_cpu_opp); /** - * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. - * @ape_opp: The APE OPP to set. - * @cpu_opp: The CPU OPP to set. + * prcmu_system_reset - System reset * - * This function sets the OPPs of the APE and the CPU. + * Saves the reset reason code and then sets the APE_SOFRST register which + * fires interrupt to fw */ -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) +void prcmu_system_reset(u16 reset_code) { - return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); + writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON)); + writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST)); } -EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); /** - * prcmu_get_ape_opp() - Get the OPP of the APE. - * - * This function gets the OPP of the APE. + * prcmu_reset_modem - ask the PRCMU to reset modem */ -enum prcmu_ape_opp prcmu_get_ape_opp(void) +void prcmu_modem_reset(void) { - return readb(ACK_MB1_CURR_APEOPP); + mutex_lock(&mb1_transfer.lock); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + wait_for_completion(&mb1_transfer.work); + + /* + * No need to check return from PRCMU as modem should go in reset state + * This state is already managed by upper layer + */ + + mutex_unlock(&mb1_transfer.lock); } -EXPORT_SYMBOL(prcmu_get_ape_opp); -/** - * prcmu_get_cpu_opp() - Get the OPP of the CPU. - * - * This function gets the OPP of the CPU. The OPP is specified in %%. - * PRCMU_OPP_EXT is a special OPP value, not specified in %%. - */ -int prcmu_get_cpu_opp(void) +static void ack_dbb_wakeup(void) { - return readb(ACK_MB1_CURR_ARMOPP); + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) + cpu_relax(); + + writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0)); + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET)); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); } -EXPORT_SYMBOL(prcmu_get_cpu_opp); -bool prcmu_has_arm_maxopp(void) +static inline void print_unknown_header_warning(u8 n, u8 header) { - return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) - == PRCM_AVS_ISMODEENABLE_MASK; + pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n", + header, n); } -static void read_mailbox_0(void) +static bool read_mailbox_0(void) { - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); + bool r; + u32 ev; + unsigned int n; + u8 header; + + header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0); + switch (header) { + case MB0H_WAKEUP_EXE: + case MB0H_WAKEUP_SLEEP: + if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1) + ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500); + else + ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500); + + if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK)) + complete(&mb0_transfer.ac_wake_work); + if (ev & WAKEUP_BIT_SYSCLK_OK) + complete(&mb3_transfer.sysclk_work); + + ev &= mb0_transfer.req.dbb_irqs; + + for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) { + if (ev & prcmu_irq_bit[n]) + generic_handle_irq(IRQ_PRCMU_BASE + n); + } + r = true; + break; + default: + print_unknown_header_warning(0, header); + r = false; + break; + } + writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return r; } -static void read_mailbox_1(void) +static bool read_mailbox_1(void) { - mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); - mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); + mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1); + mb1_transfer.ack.arm_opp = readb(tcdm_base + + PRCM_ACK_MB1_CURRENT_ARM_OPP); + mb1_transfer.ack.ape_opp = readb(tcdm_base + + PRCM_ACK_MB1_CURRENT_APE_OPP); + mb1_transfer.ack.ape_voltage_status = readb(tcdm_base + + PRCM_ACK_MB1_APE_VOLTAGE_STATUS); + writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); complete(&mb1_transfer.work); - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); + return false; } -static void read_mailbox_2(void) +static bool read_mailbox_2(void) { - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); + mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS); + writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + complete(&mb2_transfer.work); + return false; } -static void read_mailbox_3(void) +static bool read_mailbox_3(void) { - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); + writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; } -static void read_mailbox_4(void) +static bool read_mailbox_4(void) { - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); + u8 header; + bool do_complete = true; + + header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4); + switch (header) { + case MB4H_MEM_ST: + case MB4H_HOTDOG: + case MB4H_HOTMON: + case MB4H_HOT_PERIOD: + break; + default: + print_unknown_header_warning(4, header); + do_complete = false; + break; + } + + writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + + if (do_complete) + complete(&mb4_transfer.work); + + return false; } -static void read_mailbox_5(void) +static bool read_mailbox_5(void) { - mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); - mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL); + writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); complete(&mb5_transfer.work); - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); + return false; } -static void read_mailbox_6(void) +static bool read_mailbox_6(void) { - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); + writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; } -static void read_mailbox_7(void) +static bool read_mailbox_7(void) { - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); + writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + return false; } -static void (* const read_mailbox[NUM_MBOX])(void) = { +static bool (* const read_mailbox[NUM_MB])(void) = { read_mailbox_0, read_mailbox_1, read_mailbox_2, @@ -347,49 +1692,199 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data) { u32 bits; u8 n; + irqreturn_t r; - bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); if (unlikely(!bits)) return IRQ_NONE; + r = IRQ_HANDLED; for (n = 0; bits; n++) { if (bits & MBOX_BIT(n)) { bits -= MBOX_BIT(n); - read_mailbox[n](); + if (read_mailbox[n]()) + r = IRQ_WAKE_THREAD; } } + return r; +} + +static irqreturn_t prcmu_irq_thread_fn(int irq, void *data) +{ + ack_dbb_wakeup(); return IRQ_HANDLED; } +static void prcmu_mask_work(struct work_struct *work) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.lock, flags); + + config_wakeups(); + + spin_unlock_irqrestore(&mb0_transfer.lock, flags); +} + +static void prcmu_irq_mask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags); + + mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE]; + + spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags); + + if (d->irq != IRQ_PRCMU_CA_SLEEP) + schedule_work(&mb0_transfer.mask_work); +} + +static void prcmu_irq_unmask(struct irq_data *d) +{ + unsigned long flags; + + spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags); + + mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE]; + + spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags); + + if (d->irq != IRQ_PRCMU_CA_SLEEP) + schedule_work(&mb0_transfer.mask_work); +} + +static void noop(struct irq_data *d) +{ +} + +static struct irq_chip prcmu_irq_chip = { + .name = "prcmu", + .irq_disable = prcmu_irq_mask, + .irq_ack = noop, + .irq_mask = prcmu_irq_mask, + .irq_unmask = prcmu_irq_unmask, +}; + void __init prcmu_early_init(void) { - if (cpu_is_u8500v11() || cpu_is_u8500ed()) { + unsigned int i; + + if (cpu_is_u8500v1()) { tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); } else if (cpu_is_u8500v2()) { + void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K); + + if (tcpm_base != NULL) { + int version; + version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); + prcmu_version.project_number = version & 0xFF; + prcmu_version.api_version = (version >> 8) & 0xFF; + prcmu_version.func_version = (version >> 16) & 0xFF; + prcmu_version.errata = (version >> 24) & 0xFF; + pr_info("PRCMU firmware version %d.%d.%d\n", + (version >> 8) & 0xFF, (version >> 16) & 0xFF, + (version >> 24) & 0xFF); + iounmap(tcpm_base); + } + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); } else { pr_err("prcmu: Unsupported chip version\n"); BUG(); } -} - -static int __init prcmu_init(void) -{ - if (cpu_is_u8500ed()) { - pr_err("prcmu: Unsupported chip version\n"); - return 0; - } + spin_lock_init(&mb0_transfer.lock); + spin_lock_init(&mb0_transfer.dbb_irqs_lock); + mutex_init(&mb0_transfer.ac_wake_lock); + init_completion(&mb0_transfer.ac_wake_work); mutex_init(&mb1_transfer.lock); init_completion(&mb1_transfer.work); + mutex_init(&mb2_transfer.lock); + init_completion(&mb2_transfer.work); + spin_lock_init(&mb2_transfer.auto_pm_lock); + spin_lock_init(&mb3_transfer.lock); + mutex_init(&mb3_transfer.sysclk_lock); + init_completion(&mb3_transfer.sysclk_work); + mutex_init(&mb4_transfer.lock); + init_completion(&mb4_transfer.work); mutex_init(&mb5_transfer.lock); init_completion(&mb5_transfer.work); + INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work); + + /* Initalize irqs. */ + for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) { + unsigned int irq; + + irq = IRQ_PRCMU_BASE + i; + irq_set_chip_and_handler(irq, &prcmu_irq_chip, + handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + } +} + +static struct mfd_cell db8500_prcmu_devs[] = { + { + .name = "db8500-prcmu-regulators", + }, + { + .name = "cpufreq-u8500", + }, +}; + +/** + * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic + * + */ +static int __init db8500_prcmu_probe(struct platform_device *pdev) +{ + int err = 0; + + if (ux500_is_svp()) + return -ENODEV; + /* Clean up the mailbox interrupts after pre-kernel code. */ - writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR)); + + err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, + prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); + if (err < 0) { + pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n"); + err = -EBUSY; + goto no_irq_return; + } + + if (cpu_is_u8500v20_or_later()) + prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); - return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, - "prcmu", NULL); + err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, + ARRAY_SIZE(db8500_prcmu_devs), NULL, + 0); + + if (err) + pr_err("prcmu: Failed to add subdevices\n"); + else + pr_info("DB8500 PRCMU initialized\n"); + +no_irq_return: + return err; } -arch_initcall(prcmu_init); +static struct platform_driver db8500_prcmu_driver = { + .driver = { + .name = "db8500-prcmu", + .owner = THIS_MODULE, + }, +}; + +static int __init db8500_prcmu_init(void) +{ + return platform_driver_probe(&db8500_prcmu_driver, db8500_prcmu_probe); +} + +arch_initcall(db8500_prcmu_init); + +MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>"); +MODULE_DESCRIPTION("DB8500 PRCM Unit driver"); +MODULE_LICENSE("GPL v2"); |