diff options
Diffstat (limited to 'drivers/i2c/busses')
37 files changed, 1249 insertions, 957 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7244c8be6063..b4aaa1bd6728 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -133,7 +133,7 @@ config I2C_PIIX4 ATI IXP300 ATI IXP400 ATI SB600 - ATI SB700 + ATI SB700/SP5100 ATI SB800 AMD Hudson-2 Serverworks OSB4 @@ -143,6 +143,10 @@ config I2C_PIIX4 Serverworks HT-1100 SMSC Victory66 + Some AMD chipsets contain two PIIX4-compatible SMBus + controllers. This driver will attempt to use both controllers + on the SB700/SP5100, if they have been initialized by the BIOS. + This driver can also be built as a module. If so, the module will be called i2c-piix4. @@ -458,7 +462,7 @@ config I2C_MPC config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL + depends on (MV64X60 || PLAT_ORION) help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. @@ -479,10 +483,11 @@ config I2C_MXS config I2C_NOMADIK tristate "ST-Ericsson Nomadik/Ux500 I2C Controller" - depends on PLAT_NOMADIK + depends on ARM_AMBA help If you say yes to this option, support will be included for the - I2C interface from ST-Ericsson's Nomadik and Ux500 architectures. + I2C interface from ST-Ericsson's Nomadik and Ux500 architectures, + as well as the STA2X11 PCIe I/O HUB. config I2C_NUC900 tristate "NUC900 I2C Driver" diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index e66d248fc126..125cd8e0ad25 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -531,15 +531,7 @@ static struct pci_driver ali1535_driver = { .remove = __devexit_p(ali1535_remove), }; -static int __init i2c_ali1535_init(void) -{ - return pci_register_driver(&ali1535_driver); -} - -static void __exit i2c_ali1535_exit(void) -{ - pci_unregister_driver(&ali1535_driver); -} +module_pci_driver(ali1535_driver); MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " @@ -547,6 +539,3 @@ MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "and Dan Eaton <dan.eaton@rocketlogix.com>"); MODULE_DESCRIPTION("ALI1535 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_ali1535_init); -module_exit(i2c_ali1535_exit); diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 47ae0091e027..e02d9f86c6a0 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -431,18 +431,6 @@ static struct pci_driver ali1563_pci_driver = { .remove = __devexit_p(ali1563_remove), }; -static int __init ali1563_init(void) -{ - return pci_register_driver(&ali1563_pci_driver); -} - -module_init(ali1563_init); - -static void __exit ali1563_exit(void) -{ - pci_unregister_driver(&ali1563_pci_driver); -} - -module_exit(ali1563_exit); +module_pci_driver(ali1563_pci_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 087ea9caa74d..ce8d26d053a5 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -513,21 +513,10 @@ static struct pci_driver ali15x3_driver = { .remove = __devexit_p(ali15x3_remove), }; -static int __init i2c_ali15x3_init(void) -{ - return pci_register_driver(&ali15x3_driver); -} - -static void __exit i2c_ali15x3_exit(void) -{ - pci_unregister_driver(&ali15x3_driver); -} +module_pci_driver(ali15x3_driver); MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("ALI15X3 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_ali15x3_init); -module_exit(i2c_ali15x3_exit); diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index eb778bf15c18..304aa03b57b2 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -410,21 +410,10 @@ static struct pci_driver amd756_driver = { .remove = __devexit_p(amd756_remove), }; -static int __init amd756_init(void) -{ - return pci_register_driver(&amd756_driver); -} - -static void __exit amd756_exit(void) -{ - pci_unregister_driver(&amd756_driver); -} +module_pci_driver(amd756_driver); MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>"); MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(amd756_smbus); - -module_init(amd756_init) -module_exit(amd756_exit) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index e5ac53b99b04..0919ac1d99aa 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -491,15 +491,4 @@ static struct pci_driver amd8111_driver = { .remove = __devexit_p(amd8111_remove), }; -static int __init i2c_amd8111_init(void) -{ - return pci_register_driver(&amd8111_driver); -} - -static void __exit i2c_amd8111_exit(void) -{ - pci_unregister_driver(&amd8111_driver); -} - -module_init(i2c_amd8111_init); -module_exit(i2c_amd8111_exit); +module_pci_driver(amd8111_driver); diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 1679deef9c89..e24484beef07 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -279,30 +279,31 @@ static int __devexit at91_i2c_remove(struct platform_device *pdev) /* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */ -static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg) +static int at91_i2c_suspend(struct device *dev) { clk_disable(twi_clk); return 0; } -static int at91_i2c_resume(struct platform_device *pdev) +static int at91_i2c_resume(struct device *dev) { return clk_enable(twi_clk); } +static SIMPLE_DEV_PM_OPS(at91_i2c_pm, at91_i2c_suspend, at91_i2c_resume); +#define AT91_I2C_PM (&at91_i2c_pm) + #else -#define at91_i2c_suspend NULL -#define at91_i2c_resume NULL +#define AT91_I2C_PM NULL #endif static struct platform_driver at91_i2c_driver = { .probe = at91_i2c_probe, .remove = __devexit_p(at91_i2c_remove), - .suspend = at91_i2c_suspend, - .resume = at91_i2c_resume, .driver = { .name = "at91_i2c", .owner = THIS_MODULE, + .pm = AT91_I2C_PM, }, }; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index cdb59e5b23f7..0cf780fd6ef1 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -25,6 +25,7 @@ #include <asm/blackfin.h> #include <asm/portmux.h> #include <asm/irq.h> +#include <asm/bfin_twi.h> /* SMBus mode*/ #define TWI_I2C_MODE_STANDARD 1 @@ -32,56 +33,6 @@ #define TWI_I2C_MODE_COMBINED 3 #define TWI_I2C_MODE_REPEAT 4 -struct bfin_twi_iface { - int irq; - spinlock_t lock; - char read_write; - u8 command; - u8 *transPtr; - int readNum; - int writeNum; - int cur_mode; - int manual_stop; - int result; - struct i2c_adapter adap; - struct completion complete; - struct i2c_msg *pmsg; - int msg_num; - int cur_msg; - u16 saved_clkdiv; - u16 saved_control; - void __iomem *regs_base; -}; - - -#define DEFINE_TWI_REG(reg, off) \ -static inline u16 read_##reg(struct bfin_twi_iface *iface) \ - { return bfin_read16(iface->regs_base + (off)); } \ -static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \ - { bfin_write16(iface->regs_base + (off), v); } - -DEFINE_TWI_REG(CLKDIV, 0x00) -DEFINE_TWI_REG(CONTROL, 0x04) -DEFINE_TWI_REG(SLAVE_CTL, 0x08) -DEFINE_TWI_REG(SLAVE_STAT, 0x0C) -DEFINE_TWI_REG(SLAVE_ADDR, 0x10) -DEFINE_TWI_REG(MASTER_CTL, 0x14) -DEFINE_TWI_REG(MASTER_STAT, 0x18) -DEFINE_TWI_REG(MASTER_ADDR, 0x1C) -DEFINE_TWI_REG(INT_STAT, 0x20) -DEFINE_TWI_REG(INT_MASK, 0x24) -DEFINE_TWI_REG(FIFO_CTL, 0x28) -DEFINE_TWI_REG(FIFO_STAT, 0x2C) -DEFINE_TWI_REG(XMT_DATA8, 0x80) -DEFINE_TWI_REG(XMT_DATA16, 0x84) -DEFINE_TWI_REG(RCV_DATA8, 0x88) -DEFINE_TWI_REG(RCV_DATA16, 0x8C) - -static const u16 pin_req[2][3] = { - {P_TWI0_SCL, P_TWI0_SDA, 0}, - {P_TWI1_SCL, P_TWI1_SDA, 0}, -}; - static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, unsigned short twi_int_status) { @@ -99,7 +50,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, */ else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | MDIR | RSTART); + read_MASTER_CTL(iface) | MDIR); else if (iface->manual_stop) write_MASTER_CTL(iface, read_MASTER_CTL(iface) | STOP); @@ -107,10 +58,10 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, iface->cur_msg + 1 < iface->msg_num) { if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | RSTART | MDIR); + read_MASTER_CTL(iface) | MDIR); else write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) | RSTART) & ~MDIR); + read_MASTER_CTL(iface) & ~MDIR); } } if (twi_int_status & RCVSERV) { @@ -130,17 +81,25 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, } iface->transPtr++; iface->readNum--; - } else if (iface->manual_stop) { - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | STOP); - } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg + 1 < iface->msg_num) { - if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | RSTART | MDIR); - else + } + + if (iface->readNum == 0) { + if (iface->manual_stop) { + /* Temporary workaround to avoid possible bus stall - + * Flush FIFO before issuing the STOP condition + */ + read_RCV_DATA16(iface); write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) | RSTART) & ~MDIR); + read_MASTER_CTL(iface) | STOP); + } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && + iface->cur_msg + 1 < iface->msg_num) { + if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) | MDIR); + else + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & ~MDIR); + } } } if (twi_int_status & MERR) { @@ -193,7 +152,8 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, return; } if (twi_int_status & MCOMP) { - if ((read_MASTER_CTL(iface) & MEN) == 0 && + if (twi_int_status & (XMTSERV | RCVSERV) && + (read_MASTER_CTL(iface) & MEN) == 0 && (iface->cur_mode == TWI_I2C_MODE_REPEAT || iface->cur_mode == TWI_I2C_MODE_COMBINED)) { iface->result = -1; @@ -221,7 +181,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, write_MASTER_CTL(iface, read_MASTER_CTL(iface) & ~RSTART); } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg+1 < iface->msg_num) { + iface->cur_msg + 1 < iface->msg_num) { iface->cur_msg++; iface->transPtr = iface->pmsg[iface->cur_msg].buf; iface->writeNum = iface->readNum = @@ -241,27 +201,29 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, } } - if (iface->pmsg[iface->cur_msg].len <= 255) - write_MASTER_CTL(iface, + if (iface->pmsg[iface->cur_msg].len <= 255) { + write_MASTER_CTL(iface, (read_MASTER_CTL(iface) & (~(0xff << 6))) | - (iface->pmsg[iface->cur_msg].len << 6)); - else { + (iface->pmsg[iface->cur_msg].len << 6)); + iface->manual_stop = 0; + } else { write_MASTER_CTL(iface, (read_MASTER_CTL(iface) | (0xff << 6))); iface->manual_stop = 1; } - /* remove restart bit and enable master receive */ - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & ~RSTART); + /* remove restart bit before last message */ + if (iface->cur_msg + 1 == iface->msg_num) + write_MASTER_CTL(iface, + read_MASTER_CTL(iface) & ~RSTART); } else { iface->result = 1; write_INT_MASK(iface, 0); write_MASTER_CTL(iface, 0); } + complete(&iface->complete); } - complete(&iface->complete); } /* Interrupt handler */ @@ -298,8 +260,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, if (!(read_CONTROL(iface) & TWI_ENA)) return -ENXIO; - while (read_MASTER_STAT(iface) & BUSBUSY) - yield(); + if (read_MASTER_STAT(iface) & BUSBUSY) + return -EAGAIN; iface->pmsg = msgs; iface->msg_num = num; @@ -311,7 +273,8 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, return -EINVAL; } - iface->cur_mode = TWI_I2C_MODE_REPEAT; + if (iface->msg_num > 1) + iface->cur_mode = TWI_I2C_MODE_REPEAT; iface->manual_stop = 0; iface->transPtr = pmsg->buf; iface->writeNum = iface->readNum = pmsg->len; @@ -356,6 +319,7 @@ static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, /* Master enable */ write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | + (iface->msg_num > 1 ? RSTART : 0) | ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); SSYNC(); @@ -398,8 +362,8 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr, if (!(read_CONTROL(iface) & TWI_ENA)) return -ENXIO; - while (read_MASTER_STAT(iface) & BUSBUSY) - yield(); + if (read_MASTER_STAT(iface) & BUSBUSY) + return -EAGAIN; iface->writeNum = 0; iface->readNum = 0; @@ -520,7 +484,7 @@ int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr, else write_MASTER_CTL(iface, 0x1 << 6); /* Master enable */ - write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | + write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART | ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); break; default: @@ -611,9 +575,9 @@ static struct i2c_algorithm bfin_twi_algorithm = { .functionality = bfin_twi_functionality, }; -static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state) +static int i2c_bfin_twi_suspend(struct device *dev) { - struct bfin_twi_iface *iface = platform_get_drvdata(pdev); + struct bfin_twi_iface *iface = dev_get_drvdata(dev); iface->saved_clkdiv = read_CLKDIV(iface); iface->saved_control = read_CONTROL(iface); @@ -626,14 +590,14 @@ static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state return 0; } -static int i2c_bfin_twi_resume(struct platform_device *pdev) +static int i2c_bfin_twi_resume(struct device *dev) { - struct bfin_twi_iface *iface = platform_get_drvdata(pdev); + struct bfin_twi_iface *iface = dev_get_drvdata(dev); int rc = request_irq(iface->irq, bfin_twi_interrupt_entry, - 0, pdev->name, iface); + 0, to_platform_device(dev)->name, iface); if (rc) { - dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); + dev_err(dev, "Can't get IRQ %d !\n", iface->irq); return -ENODEV; } @@ -646,6 +610,9 @@ static int i2c_bfin_twi_resume(struct platform_device *pdev) return 0; } +static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm, + i2c_bfin_twi_suspend, i2c_bfin_twi_resume); + static int i2c_bfin_twi_probe(struct platform_device *pdev) { struct bfin_twi_iface *iface; @@ -695,7 +662,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) p_adap->timeout = 5 * HZ; p_adap->retries = 3; - rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi"); + rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data, + "i2c-bfin-twi"); if (rc) { dev_err(&pdev->dev, "Can't setup pin mux!\n"); goto out_error_pin_mux; @@ -742,7 +710,7 @@ out_error_add_adapter: free_irq(iface->irq, iface); out_error_req_irq: out_error_no_irq: - peripheral_free_list(pin_req[pdev->id]); + peripheral_free_list((unsigned short *)pdev->dev.platform_data); out_error_pin_mux: iounmap(iface->regs_base); out_error_ioremap: @@ -760,7 +728,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev) i2c_del_adapter(&(iface->adap)); free_irq(iface->irq, iface); - peripheral_free_list(pin_req[pdev->id]); + peripheral_free_list((unsigned short *)pdev->dev.platform_data); iounmap(iface->regs_base); kfree(iface); @@ -770,11 +738,10 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev) static struct platform_driver i2c_bfin_twi_driver = { .probe = i2c_bfin_twi_probe, .remove = i2c_bfin_twi_remove, - .suspend = i2c_bfin_twi_suspend, - .resume = i2c_bfin_twi_resume, .driver = { .name = "i2c-bfin-twi", .owner = THIS_MODULE, + .pm = &i2c_bfin_twi_pm, }, }; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 00e8f213f56e..92a1e2c15baa 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -374,17 +374,7 @@ static struct pci_driver dw_i2c_driver = { }, }; -static int __init dw_i2c_init_driver(void) -{ - return pci_register_driver(&dw_i2c_driver); -} -module_init(dw_i2c_init_driver); - -static void __exit dw_i2c_exit_driver(void) -{ - pci_unregister_driver(&dw_i2c_driver); -} -module_exit(dw_i2c_exit_driver); +module_pci_driver(dw_i2c_driver); MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index 7eb19a5222f2..aedb94f34bf7 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -517,6 +517,6 @@ static struct usb_driver diolan_u2c_driver = { module_usb_driver(diolan_u2c_driver); -MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); +MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); MODULE_DESCRIPTION(DRIVER_NAME " driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 2f74ae872e1e..259f7697bf25 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -953,17 +953,7 @@ static struct pci_driver pch_pcidriver = { .resume = pch_i2c_resume }; -static int __init pch_pci_init(void) -{ - return pci_register_driver(&pch_pcidriver); -} -module_init(pch_pci_init); - -static void __exit pch_pci_exit(void) -{ - pci_unregister_driver(&pch_pcidriver); -} -module_exit(pch_pci_exit); +module_pci_driver(pch_pcidriver); MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index c527de17db4f..c9f95e1666a8 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -156,23 +156,8 @@ static struct pci_driver hydra_driver = { .remove = __devexit_p(hydra_remove), }; -static int __init i2c_hydra_init(void) -{ - return pci_register_driver(&hydra_driver); -} - - -static void __exit i2c_hydra_exit(void) -{ - pci_unregister_driver(&hydra_driver); -} - - +module_pci_driver(hydra_driver); MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>"); MODULE_DESCRIPTION("i2c for Apple Hydra Mac I/O"); MODULE_LICENSE("GPL"); - -module_init(i2c_hydra_init); -module_exit(i2c_hydra_exit); - diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ae2945a5e007..898dcf9c7ade 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -60,10 +60,12 @@ Block process call transaction no I2C block read transaction yes (doesn't use the block buffer) Slave mode no + Interrupt processing yes See the file Documentation/i2c/busses/i2c-i801 for details. */ +#include <linux/interrupt.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/kernel.h> @@ -76,6 +78,7 @@ #include <linux/io.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <linux/wait.h> /* I801 SMBus address offsets */ #define SMBHSTSTS(p) (0 + (p)->smba) @@ -91,8 +94,12 @@ /* PCI Address Constants */ #define SMBBAR 4 +#define SMBPCISTS 0x006 #define SMBHSTCFG 0x040 +/* Host status bits for SMBPCISTS */ +#define SMBPCISTS_INTS 0x08 + /* Host configuration bits for SMBHSTCFG */ #define SMBHSTCFG_HST_EN 1 #define SMBHSTCFG_SMB_SMI_EN 2 @@ -102,12 +109,8 @@ #define SMBAUXCTL_CRC 1 #define SMBAUXCTL_E32B 2 -/* kill bit for SMBHSTCNT */ -#define SMBHSTCNT_KILL 2 - /* Other settings */ #define MAX_RETRIES 400 -#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ /* I801 command constants */ #define I801_QUICK 0x00 @@ -117,10 +120,13 @@ #define I801_PROC_CALL 0x10 /* unimplemented */ #define I801_BLOCK_DATA 0x14 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ -#define I801_BLOCK_LAST 0x34 -#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */ -#define I801_START 0x40 -#define I801_PEC_EN 0x80 /* ICH3 and later */ + +/* I801 Host Control register bits */ +#define SMBHSTCNT_INTREN 0x01 +#define SMBHSTCNT_KILL 0x02 +#define SMBHSTCNT_LAST_BYTE 0x20 +#define SMBHSTCNT_START 0x40 +#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */ /* I801 Hosts Status register bits */ #define SMBHSTSTS_BYTE_DONE 0x80 @@ -132,9 +138,11 @@ #define SMBHSTSTS_INTR 0x02 #define SMBHSTSTS_HOST_BUSY 0x01 -#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \ - SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ - SMBHSTSTS_INTR) +#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ + SMBHSTSTS_DEV_ERR) + +#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ + STATUS_ERROR_FLAGS) /* Older devices have their ID defined in <linux/pci_ids.h> */ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 @@ -154,6 +162,17 @@ struct i801_priv { unsigned char original_hstcfg; struct pci_dev *pci_dev; unsigned int features; + + /* isr processing */ + wait_queue_head_t waitq; + u8 status; + + /* Command state used by isr for byte-by-byte block transactions */ + u8 cmd; + bool is_read; + int count; + int len; + u8 *data; }; static struct pci_driver i801_driver; @@ -162,6 +181,7 @@ static struct pci_driver i801_driver; #define FEATURE_BLOCK_BUFFER (1 << 1) #define FEATURE_BLOCK_PROC (1 << 2) #define FEATURE_I2C_BLOCK_READ (1 << 3) +#define FEATURE_IRQ (1 << 4) /* Not really a feature, but it's convenient to handle it as such */ #define FEATURE_IDF (1 << 15) @@ -170,6 +190,7 @@ static const char *i801_feature_names[] = { "Block buffer", "Block process call", "I2C block read", + "Interrupt", }; static unsigned int disable_features; @@ -205,13 +226,22 @@ static int i801_check_pre(struct i801_priv *priv) return 0; } -/* Convert the status register to an error code, and clear it. */ -static int i801_check_post(struct i801_priv *priv, int status, int timeout) +/* + * Convert the status register to an error code, and clear it. + * Note that status only contains the bits we want to clear, not the + * actual register value. + */ +static int i801_check_post(struct i801_priv *priv, int status) { int result = 0; - /* If the SMBus is still busy, we give up */ - if (timeout) { + /* + * If the SMBus is still busy, we give up + * Note: This timeout condition only happens when using polling + * transactions. For interrupt operation, NAK/timeout is indicated by + * DEV_ERR. + */ + if (unlikely(status < 0)) { dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); /* try to stop the current command */ dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); @@ -244,64 +274,76 @@ static int i801_check_post(struct i801_priv *priv, int status, int timeout) dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); } - if (result) { - /* Clear error flags */ - outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv)); - status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; - if (status) { - dev_warn(&priv->pci_dev->dev, "Failed clearing status " - "flags at end of transaction (%02x)\n", - status); - } - } + /* Clear status flags except BYTE_DONE, to be cleared by caller */ + outb_p(status, SMBHSTSTS(priv)); return result; } -static int i801_transaction(struct i801_priv *priv, int xact) +/* Wait for BUSY being cleared and either INTR or an error flag being set */ +static int i801_wait_intr(struct i801_priv *priv) { - int status; - int result; int timeout = 0; - - result = i801_check_pre(priv); - if (result < 0) - return result; - - /* the current contents of SMBHSTCNT can be overwritten, since PEC, - * INTREN, SMBSCMD are passed in xact */ - outb_p(xact | I801_START, SMBHSTCNT(priv)); + int status; /* We will always wait for a fraction of a second! */ do { usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); - } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES)); + } while (((status & SMBHSTSTS_HOST_BUSY) || + !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) && + (timeout++ < MAX_RETRIES)); - result = i801_check_post(priv, status, timeout > MAX_RETRIES); - if (result < 0) - return result; - - outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); - return 0; + if (timeout > MAX_RETRIES) { + dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n"); + return -ETIMEDOUT; + } + return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR); } -/* wait for INTR bit as advised by Intel */ -static void i801_wait_hwpec(struct i801_priv *priv) +/* Wait for either BYTE_DONE or an error flag being set */ +static int i801_wait_byte_done(struct i801_priv *priv) { int timeout = 0; int status; + /* We will always wait for a fraction of a second! */ do { usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); - } while ((!(status & SMBHSTSTS_INTR)) - && (timeout++ < MAX_RETRIES)); + } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) && + (timeout++ < MAX_RETRIES)); - if (timeout > MAX_RETRIES) - dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n"); + if (timeout > MAX_RETRIES) { + dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n"); + return -ETIMEDOUT; + } + return status & STATUS_ERROR_FLAGS; +} - outb_p(status, SMBHSTSTS(priv)); +static int i801_transaction(struct i801_priv *priv, int xact) +{ + int status; + int result; + + result = i801_check_pre(priv); + if (result < 0) + return result; + + if (priv->features & FEATURE_IRQ) { + outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, + SMBHSTCNT(priv)); + wait_event(priv->waitq, (status = priv->status)); + priv->status = 0; + return i801_check_post(priv, status); + } + + /* the current contents of SMBHSTCNT can be overwritten, since PEC, + * SMBSCMD are passed in xact */ + outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); + + status = i801_wait_intr(priv); + return i801_check_post(priv, status); } static int i801_block_transaction_by_block(struct i801_priv *priv, @@ -321,8 +363,8 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, outb_p(data->block[i+1], SMBBLKDAT(priv)); } - status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | - I801_PEC_EN * hwpec); + status = i801_transaction(priv, I801_BLOCK_DATA | + (hwpec ? SMBHSTCNT_PEC_EN : 0)); if (status) return status; @@ -338,6 +380,98 @@ static int i801_block_transaction_by_block(struct i801_priv *priv, return 0; } +static void i801_isr_byte_done(struct i801_priv *priv) +{ + if (priv->is_read) { + /* For SMBus block reads, length is received with first byte */ + if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && + (priv->count == 0)) { + priv->len = inb_p(SMBHSTDAT0(priv)); + if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { + dev_err(&priv->pci_dev->dev, + "Illegal SMBus block read size %d\n", + priv->len); + /* FIXME: Recover */ + priv->len = I2C_SMBUS_BLOCK_MAX; + } else { + dev_dbg(&priv->pci_dev->dev, + "SMBus block read size is %d\n", + priv->len); + } + priv->data[-1] = priv->len; + } + + /* Read next byte */ + if (priv->count < priv->len) + priv->data[priv->count++] = inb(SMBBLKDAT(priv)); + else + dev_dbg(&priv->pci_dev->dev, + "Discarding extra byte on block read\n"); + + /* Set LAST_BYTE for last byte of read transaction */ + if (priv->count == priv->len - 1) + outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, + SMBHSTCNT(priv)); + } else if (priv->count < priv->len - 1) { + /* Write next byte, except for IRQ after last byte */ + outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); + } + + /* Clear BYTE_DONE to continue with next byte */ + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); +} + +/* + * There are two kinds of interrupts: + * + * 1) i801 signals transaction completion with one of these interrupts: + * INTR - Success + * DEV_ERR - Invalid command, NAK or communication timeout + * BUS_ERR - SMI# transaction collision + * FAILED - transaction was canceled due to a KILL request + * When any of these occur, update ->status and wake up the waitq. + * ->status must be cleared before kicking off the next transaction. + * + * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt + * occurs for each byte of a byte-by-byte to prepare the next byte. + */ +static irqreturn_t i801_isr(int irq, void *dev_id) +{ + struct i801_priv *priv = dev_id; + u16 pcists; + u8 status; + + /* Confirm this is our interrupt */ + pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); + if (!(pcists & SMBPCISTS_INTS)) + return IRQ_NONE; + + status = inb_p(SMBHSTSTS(priv)); + if (status != 0x42) + dev_dbg(&priv->pci_dev->dev, "irq: status = %02x\n", status); + + if (status & SMBHSTSTS_BYTE_DONE) + i801_isr_byte_done(priv); + + /* + * Clear irq sources and report transaction result. + * ->status must be cleared before the next transaction is started. + */ + status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; + if (status) { + outb_p(status, SMBHSTSTS(priv)); + priv->status |= status; + wake_up(&priv->waitq); + } + + return IRQ_HANDLED; +} + +/* + * For "byte-by-byte" block transactions: + * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 + * I2C read uses cmd=I801_I2C_BLOCK_DATA + */ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, union i2c_smbus_data *data, char read_write, int command, @@ -347,7 +481,6 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, int smbcmd; int status; int result; - int timeout; result = i801_check_pre(priv); if (result < 0) @@ -360,36 +493,39 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, outb_p(data->block[1], SMBBLKDAT(priv)); } + if (command == I2C_SMBUS_I2C_BLOCK_DATA && + read_write == I2C_SMBUS_READ) + smbcmd = I801_I2C_BLOCK_DATA; + else + smbcmd = I801_BLOCK_DATA; + + if (priv->features & FEATURE_IRQ) { + priv->is_read = (read_write == I2C_SMBUS_READ); + if (len == 1 && priv->is_read) + smbcmd |= SMBHSTCNT_LAST_BYTE; + priv->cmd = smbcmd | SMBHSTCNT_INTREN; + priv->len = len; + priv->count = 0; + priv->data = &data->block[1]; + + outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); + wait_event(priv->waitq, (status = priv->status)); + priv->status = 0; + return i801_check_post(priv, status); + } + for (i = 1; i <= len; i++) { - if (i == len && read_write == I2C_SMBUS_READ) { - if (command == I2C_SMBUS_I2C_BLOCK_DATA) - smbcmd = I801_I2C_BLOCK_LAST; - else - smbcmd = I801_BLOCK_LAST; - } else { - if (command == I2C_SMBUS_I2C_BLOCK_DATA - && read_write == I2C_SMBUS_READ) - smbcmd = I801_I2C_BLOCK_DATA; - else - smbcmd = I801_BLOCK_DATA; - } - outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv)); + if (i == len && read_write == I2C_SMBUS_READ) + smbcmd |= SMBHSTCNT_LAST_BYTE; + outb_p(smbcmd, SMBHSTCNT(priv)); if (i == 1) - outb_p(inb(SMBHSTCNT(priv)) | I801_START, + outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START, SMBHSTCNT(priv)); - /* We will always wait for a fraction of a second! */ - timeout = 0; - do { - usleep_range(250, 500); - status = inb_p(SMBHSTSTS(priv)); - } while ((!(status & SMBHSTSTS_BYTE_DONE)) - && (timeout++ < MAX_RETRIES)); - - result = i801_check_post(priv, status, timeout > MAX_RETRIES); - if (result < 0) - return result; + status = i801_wait_byte_done(priv); + if (status) + goto exit; if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) { @@ -416,10 +552,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, outb_p(data->block[i+1], SMBBLKDAT(priv)); /* signals SMBBLKDAT ready */ - outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv)); + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); } - return 0; + status = i801_wait_intr(priv); +exit: + return i801_check_post(priv, status); } static int i801_set_block_buffer_mode(struct i801_priv *priv) @@ -474,9 +612,6 @@ static int i801_block_transaction(struct i801_priv *priv, read_write, command, hwpec); - if (result == 0 && hwpec) - i801_wait_hwpec(priv); - if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) { /* restore saved configuration register value */ @@ -564,7 +699,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, ret = i801_block_transaction(priv, data, read_write, size, hwpec); else - ret = i801_transaction(priv, xact | ENABLE_INT9); + ret = i801_transaction(priv, xact); /* Some BIOSes don't like it when PEC is enabled at reboot or resume time, so we forcibly disable it after every transaction. Turn off @@ -799,6 +934,16 @@ static int __devinit i801_probe(struct pci_dev *dev, break; } + /* IRQ processing tested on CougarPoint PCH, ICH5, ICH7-M and ICH10 */ + if (dev->device == PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS || + dev->device == PCI_DEVICE_ID_INTEL_82801EB_3 || + dev->device == PCI_DEVICE_ID_INTEL_ICH7_17 || + dev->device == PCI_DEVICE_ID_INTEL_ICH8_5 || + dev->device == PCI_DEVICE_ID_INTEL_ICH9_6 || + dev->device == PCI_DEVICE_ID_INTEL_ICH10_4 || + dev->device == PCI_DEVICE_ID_INTEL_ICH10_5) + priv->features |= FEATURE_IRQ; + /* Disable features on user request */ for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { if (priv->features & disable_features & (1 << i)) @@ -846,16 +991,30 @@ static int __devinit i801_probe(struct pci_dev *dev, } pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp); - if (temp & SMBHSTCFG_SMB_SMI_EN) + if (temp & SMBHSTCFG_SMB_SMI_EN) { dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); - else - dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n"); + /* Disable SMBus interrupt feature if SMBus using SMI# */ + priv->features &= ~FEATURE_IRQ; + } /* Clear special mode bits */ if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); + if (priv->features & FEATURE_IRQ) { + init_waitqueue_head(&priv->waitq); + + err = request_irq(dev->irq, i801_isr, IRQF_SHARED, + i801_driver.name, priv); + if (err) { + dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", + dev->irq, err); + goto exit_release; + } + dev_info(&dev->dev, "SMBus using PCI Interrupt\n"); + } + /* set up the sysfs linkage to our parent device */ priv->adapter.dev.parent = &dev->dev; @@ -867,14 +1026,18 @@ static int __devinit i801_probe(struct pci_dev *dev, err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&dev->dev, "Failed to add SMBus adapter\n"); - goto exit_release; + goto exit_free_irq; } i801_probe_optional_slaves(priv); pci_set_drvdata(dev, priv); + return 0; +exit_free_irq: + if (priv->features & FEATURE_IRQ) + free_irq(dev->irq, priv); exit_release: pci_release_region(dev, SMBBAR); exit: @@ -888,7 +1051,11 @@ static void __devexit i801_remove(struct pci_dev *dev) i2c_del_adapter(&priv->adapter); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); + + if (priv->features & FEATURE_IRQ) + free_irq(dev->irq, priv); pci_release_region(dev, SMBBAR); + pci_set_drvdata(dev, NULL); kfree(priv); /* diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 8d6b504d65c4..0722f869465c 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -53,7 +53,6 @@ #include <linux/of_i2c.h> #include <linux/pinctrl/consumer.h> -#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/i2c.h> @@ -118,10 +117,8 @@ static u16 __initdata i2c_clk_div[50][2] = { struct imx_i2c_struct { struct i2c_adapter adapter; - struct resource *res; struct clk *clk; void __iomem *base; - int irq; wait_queue_head_t queue; unsigned long i2csr; unsigned int disable_delay; @@ -473,9 +470,8 @@ static int __init i2c_imx_probe(struct platform_device *pdev) struct imxi2c_platform_data *pdata = pdev->dev.platform_data; struct pinctrl *pinctrl; void __iomem *base; - resource_size_t res_size; - int irq, bitrate; - int ret; + int irq, ret; + u32 bitrate; dev_dbg(&pdev->dev, "<%s>\n", __func__); @@ -490,25 +486,15 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return -ENOENT; } - res_size = resource_size(res); - - if (!request_mem_region(res->start, res_size, DRIVER_NAME)) { - dev_err(&pdev->dev, "request_mem_region failed\n"); + base = devm_request_and_ioremap(&pdev->dev, res); + if (!base) return -EBUSY; - } - - base = ioremap(res->start, res_size); - if (!base) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -EIO; - goto fail1; - } - i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL); + i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct), + GFP_KERNEL); if (!i2c_imx) { dev_err(&pdev->dev, "can't allocate interface\n"); - ret = -ENOMEM; - goto fail2; + return -ENOMEM; } /* Setup i2c_imx driver structure */ @@ -518,29 +504,27 @@ static int __init i2c_imx_probe(struct platform_device *pdev) i2c_imx->adapter.dev.parent = &pdev->dev; i2c_imx->adapter.nr = pdev->id; i2c_imx->adapter.dev.of_node = pdev->dev.of_node; - i2c_imx->irq = irq; i2c_imx->base = base; - i2c_imx->res = res; pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); - goto fail3; + dev_err(&pdev->dev, "can't get/select pinctrl\n"); + return PTR_ERR(pinctrl); } /* Get I2C clock */ - i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk"); + i2c_imx->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(i2c_imx->clk)) { - ret = PTR_ERR(i2c_imx->clk); dev_err(&pdev->dev, "can't get I2C clock\n"); - goto fail3; + return PTR_ERR(i2c_imx->clk); } /* Request IRQ */ - ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx); + ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0, + pdev->name, i2c_imx); if (ret) { - dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq); - goto fail4; + dev_err(&pdev->dev, "can't claim irq %d\n", irq); + return ret; } /* Init queue */ @@ -565,7 +549,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_imx->adapter); if (ret < 0) { dev_err(&pdev->dev, "registration failed\n"); - goto fail5; + return ret; } of_i2c_register_devices(&i2c_imx->adapter); @@ -573,28 +557,16 @@ static int __init i2c_imx_probe(struct platform_device *pdev) /* Set up platform driver data */ platform_set_drvdata(pdev, i2c_imx); - dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq); + dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq); dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n", - i2c_imx->res->start, i2c_imx->res->end); - dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n", - res_size, i2c_imx->res->start); + res->start, res->end); + dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x\n", + resource_size(res), res->start); dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", i2c_imx->adapter.name); dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); return 0; /* Return OK */ - -fail5: - free_irq(i2c_imx->irq, i2c_imx); -fail4: - clk_put(i2c_imx->clk); -fail3: - kfree(i2c_imx); -fail2: - iounmap(base); -fail1: - release_mem_region(res->start, resource_size(res)); - return ret; /* Return error number */ } static int __exit i2c_imx_remove(struct platform_device *pdev) @@ -606,20 +578,12 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) i2c_del_adapter(&i2c_imx->adapter); platform_set_drvdata(pdev, NULL); - /* free interrupt */ - free_irq(i2c_imx->irq, i2c_imx); - /* setup chip registers to defaults */ writeb(0, i2c_imx->base + IMX_I2C_IADR); writeb(0, i2c_imx->base + IMX_I2C_IFDR); writeb(0, i2c_imx->base + IMX_I2C_I2CR); writeb(0, i2c_imx->base + IMX_I2C_I2SR); - clk_put(i2c_imx->clk); - - iounmap(i2c_imx->base); - release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); - kfree(i2c_imx); return 0; } diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c index 365bad5b890b..7c28f10f95ca 100644 --- a/drivers/i2c/busses/i2c-intel-mid.c +++ b/drivers/i2c/busses/i2c-intel-mid.c @@ -1116,18 +1116,7 @@ static struct pci_driver intel_mid_i2c_driver = { .remove = __devexit_p(intel_mid_i2c_remove), }; -static int __init intel_mid_i2c_init(void) -{ - return pci_register_driver(&intel_mid_i2c_driver); -} - -static void __exit intel_mid_i2c_exit(void) -{ - pci_unregister_driver(&intel_mid_i2c_driver); -} - -module_init(intel_mid_i2c_init); -module_exit(intel_mid_i2c_exit); +module_pci_driver(intel_mid_i2c_driver); MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>"); MODULE_DESCRIPTION("I2C driver for Moorestown Platform"); diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 4f44a33017b0..2e9d56719e99 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -18,6 +18,11 @@ #include <linux/mv643xx_i2c.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_i2c.h> +#include <linux/clk.h> +#include <linux/err.h> /* Register defines */ #define MV64XXX_I2C_REG_SLAVE_ADDR 0x00 @@ -98,6 +103,9 @@ struct mv64xxx_i2c_data { int rc; u32 freq_m; u32 freq_n; +#if defined(CONFIG_HAVE_CLK) + struct clk *clk; +#endif wait_queue_head_t waitq; spinlock_t lock; struct i2c_msg *msg; @@ -521,6 +529,82 @@ mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data) drv_data->reg_base_p = 0; } +#ifdef CONFIG_OF +static int __devinit +mv64xxx_calc_freq(const int tclk, const int n, const int m) +{ + return tclk / (10 * (m + 1) * (2 << n)); +} + +static bool __devinit +mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n, + u32 *best_m) +{ + int freq, delta, best_delta = INT_MAX; + int m, n; + + for (n = 0; n <= 7; n++) + for (m = 0; m <= 15; m++) { + freq = mv64xxx_calc_freq(tclk, n, m); + delta = req_freq - freq; + if (delta >= 0 && delta < best_delta) { + *best_m = m; + *best_n = n; + best_delta = delta; + } + if (best_delta == 0) + return true; + } + if (best_delta == INT_MAX) + return false; + return true; +} + +static int __devinit +mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, + struct device_node *np) +{ + u32 bus_freq, tclk; + int rc = 0; + + /* CLK is mandatory when using DT to describe the i2c bus. We + * need to know tclk in order to calculate bus clock + * factors. + */ +#if !defined(CONFIG_HAVE_CLK) + /* Have OF but no CLK */ + return -ENODEV; +#else + if (IS_ERR(drv_data->clk)) { + rc = -ENODEV; + goto out; + } + tclk = clk_get_rate(drv_data->clk); + of_property_read_u32(np, "clock-frequency", &bus_freq); + if (!mv64xxx_find_baud_factors(bus_freq, tclk, + &drv_data->freq_n, &drv_data->freq_m)) { + rc = -EINVAL; + goto out; + } + drv_data->irq = irq_of_parse_and_map(np, 0); + + /* Its not yet defined how timeouts will be specified in device tree. + * So hard code the value to 1 second. + */ + drv_data->adapter.timeout = HZ; +out: + return rc; +#endif +} +#else /* CONFIG_OF */ +static int __devinit +mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, + struct device_node *np) +{ + return -ENODEV; +} +#endif /* CONFIG_OF */ + static int __devinit mv64xxx_i2c_probe(struct platform_device *pd) { @@ -528,7 +612,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data; int rc; - if ((pd->id != 0) || !pdata) + if ((!pdata && !pd->dev.of_node)) return -ENODEV; drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); @@ -546,19 +630,35 @@ mv64xxx_i2c_probe(struct platform_device *pd) init_waitqueue_head(&drv_data->waitq); spin_lock_init(&drv_data->lock); - drv_data->freq_m = pdata->freq_m; - drv_data->freq_n = pdata->freq_n; - drv_data->irq = platform_get_irq(pd, 0); +#if defined(CONFIG_HAVE_CLK) + /* Not all platforms have a clk */ + drv_data->clk = clk_get(&pd->dev, NULL); + if (!IS_ERR(drv_data->clk)) { + clk_prepare(drv_data->clk); + clk_enable(drv_data->clk); + } +#endif + if (pdata) { + drv_data->freq_m = pdata->freq_m; + drv_data->freq_n = pdata->freq_n; + drv_data->irq = platform_get_irq(pd, 0); + drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); + } else if (pd->dev.of_node) { + rc = mv64xxx_of_config(drv_data, pd->dev.of_node); + if (rc) + goto exit_unmap_regs; + } if (drv_data->irq < 0) { rc = -ENXIO; goto exit_unmap_regs; } + drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); drv_data->adapter.nr = pd->id; + drv_data->adapter.dev.of_node = pd->dev.of_node; platform_set_drvdata(pd, drv_data); i2c_set_adapdata(&drv_data->adapter, drv_data); @@ -577,11 +677,20 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_free_irq; } + of_i2c_register_devices(&drv_data->adapter); + return 0; exit_free_irq: free_irq(drv_data->irq, drv_data); exit_unmap_regs: +#if defined(CONFIG_HAVE_CLK) + /* Not all platforms have a clk */ + if (!IS_ERR(drv_data->clk)) { + clk_disable(drv_data->clk); + clk_unprepare(drv_data->clk); + } +#endif mv64xxx_i2c_unmap_regs(drv_data); exit_kfree: kfree(drv_data); @@ -597,17 +706,31 @@ mv64xxx_i2c_remove(struct platform_device *dev) rc = i2c_del_adapter(&drv_data->adapter); free_irq(drv_data->irq, drv_data); mv64xxx_i2c_unmap_regs(drv_data); +#if defined(CONFIG_HAVE_CLK) + /* Not all platforms have a clk */ + if (!IS_ERR(drv_data->clk)) { + clk_disable(drv_data->clk); + clk_unprepare(drv_data->clk); + } +#endif kfree(drv_data); return rc; } +static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata = { + { .compatible = "marvell,mv64xxx-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); + static struct platform_driver mv64xxx_i2c_driver = { .probe = mv64xxx_i2c_probe, .remove = __devexit_p(mv64xxx_i2c_remove), .driver = { .owner = THIS_MODULE, .name = MV64XXX_I2C_CTLR_NAME, + .of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table), }, }; diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 04eb441b6ce1..088c5c1ed17d 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -46,6 +46,10 @@ #define MXS_I2C_CTRL0_DIRECTION 0x00010000 #define MXS_I2C_CTRL0_XFER_COUNT(v) ((v) & 0x0000FFFF) +#define MXS_I2C_TIMING0 (0x10) +#define MXS_I2C_TIMING1 (0x20) +#define MXS_I2C_TIMING2 (0x30) + #define MXS_I2C_CTRL1 (0x40) #define MXS_I2C_CTRL1_SET (0x44) #define MXS_I2C_CTRL1_CLR (0x48) @@ -97,6 +101,35 @@ #define MXS_CMD_I2C_READ (MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \ MXS_I2C_CTRL0_MASTER_MODE) +struct mxs_i2c_speed_config { + uint32_t timing0; + uint32_t timing1; + uint32_t timing2; +}; + +/* + * Timing values for the default 24MHz clock supplied into the i2c block. + * + * The bus can operate at 95kHz or at 400kHz with the following timing + * register configurations. The 100kHz mode isn't present because it's + * values are not stated in the i.MX233/i.MX28 datasheet. The 95kHz mode + * shall be close enough replacement. Therefore when the bus is configured + * for 100kHz operation, 95kHz timing settings are actually loaded. + * + * For details, see i.MX233 [25.4.2 - 25.4.4] and i.MX28 [27.5.2 - 27.5.4]. + */ +static const struct mxs_i2c_speed_config mxs_i2c_95kHz_config = { + .timing0 = 0x00780030, + .timing1 = 0x00800030, + .timing2 = 0x00300030, +}; + +static const struct mxs_i2c_speed_config mxs_i2c_400kHz_config = { + .timing0 = 0x000f0007, + .timing1 = 0x001f000f, + .timing2 = 0x00300030, +}; + /** * struct mxs_i2c_dev - per device, private MXS-I2C data * @@ -112,11 +145,17 @@ struct mxs_i2c_dev { struct completion cmd_complete; u32 cmd_err; struct i2c_adapter adapter; + const struct mxs_i2c_speed_config *speed; }; static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) { stmp_reset_block(i2c->regs); + + writel(i2c->speed->timing0, i2c->regs + MXS_I2C_TIMING0); + writel(i2c->speed->timing1, i2c->regs + MXS_I2C_TIMING1); + writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2); + writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE, i2c->regs + MXS_I2C_QUEUECTRL_SET); @@ -193,7 +232,7 @@ static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c) static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len) { - u32 data; + u32 uninitialized_var(data); int i; for (i = 0; i < len; i++) { @@ -319,6 +358,28 @@ static const struct i2c_algorithm mxs_i2c_algo = { .functionality = mxs_i2c_func, }; +static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) +{ + uint32_t speed; + struct device *dev = i2c->dev; + struct device_node *node = dev->of_node; + int ret; + + if (!node) + return -EINVAL; + + i2c->speed = &mxs_i2c_95kHz_config; + ret = of_property_read_u32(node, "clock-frequency", &speed); + if (ret) + dev_warn(dev, "No I2C speed selected, using 100kHz\n"); + else if (speed == 400000) + i2c->speed = &mxs_i2c_400kHz_config; + else if (speed != 100000) + dev_warn(dev, "Unsupported I2C speed selected, using 100kHz\n"); + + return 0; +} + static int __devinit mxs_i2c_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -358,6 +419,11 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return err; i2c->dev = dev; + + err = mxs_i2c_get_ofdata(i2c); + if (err) + return err; + platform_set_drvdata(pdev, i2c); /* Do reset to enforce correct startup after pinmuxing */ diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 43a96a123920..392303b4be07 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -453,16 +453,4 @@ static struct pci_driver nforce2_driver = { .remove = __devexit_p(nforce2_remove), }; -static int __init nforce2_init(void) -{ - return pci_register_driver(&nforce2_driver); -} - -static void __exit nforce2_exit(void) -{ - pci_unregister_driver(&nforce2_driver); -} - -module_init(nforce2_init); -module_exit(nforce2_exit); - +module_pci_driver(nforce2_driver); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 5267ab93d550..5e6f1eed4f83 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -14,7 +14,8 @@ */ #include <linux/init.h> #include <linux/module.h> -#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/atomic.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/i2c.h> @@ -23,8 +24,7 @@ #include <linux/io.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> - -#include <plat/i2c.h> +#include <linux/platform_data/i2c-nomadik.h> #define DRIVER_NAME "nmk-i2c" @@ -136,7 +136,7 @@ struct i2c_nmk_client { /** * struct nmk_i2c_dev - private data structure of the controller. - * @pdev: parent platform device. + * @adev: parent amba device. * @adap: corresponding I2C adapter. * @irq: interrupt line for the controller. * @virtbase: virtual io memory area. @@ -150,7 +150,7 @@ struct i2c_nmk_client { * @busy: Busy doing transfer. */ struct nmk_i2c_dev { - struct platform_device *pdev; + struct amba_device *adev; struct i2c_adapter adap; int irq; void __iomem *virtbase; @@ -217,7 +217,7 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev) } } - dev_err(&dev->pdev->dev, + dev_err(&dev->adev->dev, "flushing operation timed out giving up after %d attempts", LOOP_ATTEMPTS); @@ -276,15 +276,32 @@ exit: /** * load_i2c_mcr_reg() - load the MCR register * @dev: private data of controller + * @flags: message flags */ -static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev) +static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev, u16 flags) { u32 mcr = 0; + unsigned short slave_adr_3msb_bits; - /* 7-bit address transaction */ - mcr |= GEN_MASK(1, I2C_MCR_AM, 12); mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1); + if (unlikely(flags & I2C_M_TEN)) { + /* 10-bit address transaction */ + mcr |= GEN_MASK(2, I2C_MCR_AM, 12); + /* + * Get the top 3 bits. + * EA10 represents extended address in MCR. This includes + * the extension (MSB bits) of the 7 bit address loaded + * in A7 + */ + slave_adr_3msb_bits = (dev->cli.slave_adr >> 7) & 0x7; + + mcr |= GEN_MASK(slave_adr_3msb_bits, I2C_MCR_EA10, 8); + } else { + /* 7-bit address transaction */ + mcr |= GEN_MASK(1, I2C_MCR_AM, 12); + } + /* start byte procedure not applied */ mcr |= GEN_MASK(0, I2C_MCR_SB, 11); @@ -364,7 +381,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) * and high speed (up to 3.4 Mb/s) */ if (dev->cfg.sm > I2C_FREQ_MODE_FAST) { - dev_err(&dev->pdev->dev, + dev_err(&dev->adev->dev, "do not support this mode defaulting to std. mode\n"); brcr2 = i2c_clk/(100000 * 2) & 0xffff; writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR); @@ -381,19 +398,20 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev) /** * read_i2c() - Read from I2C client device * @dev: private data of I2C Driver + * @flags: message flags * * This function reads from i2c client device when controller is in * master mode. There is a completion timeout. If there is no transfer * before timeout error is returned. */ -static int read_i2c(struct nmk_i2c_dev *dev) +static int read_i2c(struct nmk_i2c_dev *dev, u16 flags) { u32 status = 0; u32 mcr; u32 irq_mask = 0; int timeout; - mcr = load_i2c_mcr_reg(dev); + mcr = load_i2c_mcr_reg(dev, flags); writel(mcr, dev->virtbase + I2C_MCR); /* load the current CR value */ @@ -423,7 +441,7 @@ static int read_i2c(struct nmk_i2c_dev *dev) &dev->xfer_complete, dev->adap.timeout); if (timeout < 0) { - dev_err(&dev->pdev->dev, + dev_err(&dev->adev->dev, "wait_for_completion_timeout " "returned %d waiting for event\n", timeout); status = timeout; @@ -431,7 +449,7 @@ static int read_i2c(struct nmk_i2c_dev *dev) if (timeout == 0) { /* Controller timed out */ - dev_err(&dev->pdev->dev, "read from slave 0x%x timed out\n", + dev_err(&dev->adev->dev, "read from slave 0x%x timed out\n", dev->cli.slave_adr); status = -ETIMEDOUT; } @@ -459,17 +477,18 @@ static void fill_tx_fifo(struct nmk_i2c_dev *dev, int no_bytes) /** * write_i2c() - Write data to I2C client. * @dev: private data of I2C Driver + * @flags: message flags * * This function writes data to I2C client */ -static int write_i2c(struct nmk_i2c_dev *dev) +static int write_i2c(struct nmk_i2c_dev *dev, u16 flags) { u32 status = 0; u32 mcr; u32 irq_mask = 0; int timeout; - mcr = load_i2c_mcr_reg(dev); + mcr = load_i2c_mcr_reg(dev, flags); writel(mcr, dev->virtbase + I2C_MCR); @@ -510,7 +529,7 @@ static int write_i2c(struct nmk_i2c_dev *dev) &dev->xfer_complete, dev->adap.timeout); if (timeout < 0) { - dev_err(&dev->pdev->dev, + dev_err(&dev->adev->dev, "wait_for_completion_timeout " "returned %d waiting for event\n", timeout); status = timeout; @@ -518,7 +537,7 @@ static int write_i2c(struct nmk_i2c_dev *dev) if (timeout == 0) { /* Controller timed out */ - dev_err(&dev->pdev->dev, "write to slave 0x%x timed out\n", + dev_err(&dev->adev->dev, "write to slave 0x%x timed out\n", dev->cli.slave_adr); status = -ETIMEDOUT; } @@ -538,11 +557,11 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags) if (flags & I2C_M_RD) { /* read operation */ dev->cli.operation = I2C_READ; - status = read_i2c(dev); + status = read_i2c(dev, flags); } else { /* write operation */ dev->cli.operation = I2C_WRITE; - status = write_i2c(dev); + status = write_i2c(dev, flags); } if (status || (dev->result)) { @@ -557,7 +576,7 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags) if (((i2c_sr >> 2) & 0x3) == 0x3) { /* get the abort cause */ cause = (i2c_sr >> 4) & 0x7; - dev_err(&dev->pdev->dev, "%s\n", + dev_err(&dev->adev->dev, "%s\n", cause >= ARRAY_SIZE(abort_causes) ? "unknown reason" : abort_causes[cause]); @@ -630,7 +649,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, if (dev->regulator) regulator_enable(dev->regulator); - pm_runtime_get_sync(&dev->pdev->dev); + pm_runtime_get_sync(&dev->adev->dev); clk_enable(dev->clk); @@ -644,13 +663,6 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, setup_i2c_controller(dev); for (i = 0; i < num_msgs; i++) { - if (unlikely(msgs[i].flags & I2C_M_TEN)) { - dev_err(&dev->pdev->dev, - "10 bit addressing not supported\n"); - - status = -EINVAL; - goto out; - } dev->cli.slave_adr = msgs[i].addr; dev->cli.buffer = msgs[i].buf; dev->cli.count = msgs[i].len; @@ -667,7 +679,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap, out: clk_disable(dev->clk); - pm_runtime_put_sync(&dev->pdev->dev); + pm_runtime_put_sync(&dev->adev->dev); if (dev->regulator) regulator_disable(dev->regulator); @@ -790,7 +802,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) if (dev->cli.count) { dev->result = -EIO; - dev_err(&dev->pdev->dev, + dev_err(&dev->adev->dev, "%lu bytes still remain to be xfered\n", dev->cli.count); (void) init_hw(dev); @@ -834,7 +846,7 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) dev->result = -EIO; (void) init_hw(dev); - dev_err(&dev->pdev->dev, "Tx Fifo Over run\n"); + dev_err(&dev->adev->dev, "Tx Fifo Over run\n"); complete(&dev->xfer_complete); break; @@ -847,10 +859,10 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) case I2C_IT_RFSE: case I2C_IT_WTSR: case I2C_IT_STD: - dev_err(&dev->pdev->dev, "unhandled Interrupt\n"); + dev_err(&dev->adev->dev, "unhandled Interrupt\n"); break; default: - dev_err(&dev->pdev->dev, "spurious Interrupt..\n"); + dev_err(&dev->adev->dev, "spurious Interrupt..\n"); break; } @@ -861,8 +873,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg) #ifdef CONFIG_PM static int nmk_i2c_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct nmk_i2c_dev *nmk_i2c = platform_get_drvdata(pdev); + struct amba_device *adev = to_amba_device(dev); + struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev); if (nmk_i2c->busy) return -EBUSY; @@ -891,7 +903,7 @@ static const struct dev_pm_ops nmk_i2c_pm = { static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; } static const struct i2c_algorithm nmk_i2c_algo = { @@ -899,79 +911,69 @@ static const struct i2c_algorithm nmk_i2c_algo = { .functionality = nmk_i2c_functionality }; -static int __devinit nmk_i2c_probe(struct platform_device *pdev) +static atomic_t adapter_id = ATOMIC_INIT(0); + +static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - struct resource *res; struct nmk_i2c_controller *pdata = - pdev->dev.platform_data; + adev->dev.platform_data; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; + if (!pdata) { + dev_warn(&adev->dev, "no platform data\n"); + return -ENODEV; + } dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL); if (!dev) { - dev_err(&pdev->dev, "cannot allocate memory\n"); + dev_err(&adev->dev, "cannot allocate memory\n"); ret = -ENOMEM; goto err_no_mem; } dev->busy = false; - dev->pdev = pdev; - platform_set_drvdata(pdev, dev); + dev->adev = adev; + amba_set_drvdata(adev, dev); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto err_no_resource; - } - - if (request_mem_region(res->start, resource_size(res), - DRIVER_NAME "I/O region") == NULL) { - ret = -EBUSY; - goto err_no_region; - } - - dev->virtbase = ioremap(res->start, resource_size(res)); + dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); if (!dev->virtbase) { ret = -ENOMEM; goto err_no_ioremap; } - dev->irq = platform_get_irq(pdev, 0); + dev->irq = adev->irq[0]; ret = request_irq(dev->irq, i2c_irq_handler, 0, DRIVER_NAME, dev); if (ret) { - dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq); + dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq); goto err_irq; } - dev->regulator = regulator_get(&pdev->dev, "v-i2c"); + dev->regulator = regulator_get(&adev->dev, "v-i2c"); if (IS_ERR(dev->regulator)) { - dev_warn(&pdev->dev, "could not get i2c regulator\n"); + dev_warn(&adev->dev, "could not get i2c regulator\n"); dev->regulator = NULL; } - pm_suspend_ignore_children(&pdev->dev, true); - pm_runtime_enable(&pdev->dev); + pm_suspend_ignore_children(&adev->dev, true); - dev->clk = clk_get(&pdev->dev, NULL); + dev->clk = clk_get(&adev->dev, NULL); if (IS_ERR(dev->clk)) { - dev_err(&pdev->dev, "could not get i2c clock\n"); + dev_err(&adev->dev, "could not get i2c clock\n"); ret = PTR_ERR(dev->clk); goto err_no_clk; } adap = &dev->adap; - adap->dev.parent = &pdev->dev; + adap->dev.parent = &adev->dev; adap->owner = THIS_MODULE; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &nmk_i2c_algo; - adap->timeout = pdata->timeout ? msecs_to_jiffies(pdata->timeout) : - msecs_to_jiffies(20000); + adap->timeout = msecs_to_jiffies(pdata->timeout); + adap->nr = atomic_read(&adapter_id); snprintf(adap->name, sizeof(adap->name), - "Nomadik I2C%d at %lx", pdev->id, (unsigned long)res->start); - - /* fetch the controller id */ - adap->nr = pdev->id; + "Nomadik I2C%d at %pR", adap->nr, &adev->res); + atomic_inc(&adapter_id); /* fetch the controller configuration from machine */ dev->cfg.clk_freq = pdata->clk_freq; @@ -982,16 +984,18 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, dev); - dev_info(&pdev->dev, + dev_info(&adev->dev, "initialize %s on virtual base %p\n", adap->name, dev->virtbase); ret = i2c_add_numbered_adapter(adap); if (ret) { - dev_err(&pdev->dev, "failed to add adapter\n"); + dev_err(&adev->dev, "failed to add adapter\n"); goto err_add_adap; } + pm_runtime_put(&adev->dev); + return 0; err_add_adap: @@ -999,25 +1003,21 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev) err_no_clk: if (dev->regulator) regulator_put(dev->regulator); - pm_runtime_disable(&pdev->dev); free_irq(dev->irq, dev); err_irq: iounmap(dev->virtbase); err_no_ioremap: - release_mem_region(res->start, resource_size(res)); - err_no_region: - platform_set_drvdata(pdev, NULL); - err_no_resource: + amba_set_drvdata(adev, NULL); kfree(dev); err_no_mem: return ret; } -static int __devexit nmk_i2c_remove(struct platform_device *pdev) +static int nmk_i2c_remove(struct amba_device *adev) { - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - struct nmk_i2c_dev *dev = platform_get_drvdata(pdev); + struct resource *res = &adev->res; + struct nmk_i2c_dev *dev = amba_get_drvdata(adev); i2c_del_adapter(&dev->adap); flush_i2c_fifo(dev); @@ -1032,31 +1032,46 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev) clk_put(dev->clk); if (dev->regulator) regulator_put(dev->regulator); - pm_runtime_disable(&pdev->dev); - platform_set_drvdata(pdev, NULL); + pm_runtime_disable(&adev->dev); + amba_set_drvdata(adev, NULL); kfree(dev); return 0; } -static struct platform_driver nmk_i2c_driver = { - .driver = { +static struct amba_id nmk_i2c_ids[] = { + { + .id = 0x00180024, + .mask = 0x00ffffff, + }, + { + .id = 0x00380024, + .mask = 0x00ffffff, + }, + {}, +}; + +MODULE_DEVICE_TABLE(amba, nmk_i2c_ids); + +static struct amba_driver nmk_i2c_driver = { + .drv = { .owner = THIS_MODULE, .name = DRIVER_NAME, .pm = &nmk_i2c_pm, }, + .id_table = nmk_i2c_ids, .probe = nmk_i2c_probe, - .remove = __devexit_p(nmk_i2c_remove), + .remove = nmk_i2c_remove, }; static int __init nmk_i2c_init(void) { - return platform_driver_register(&nmk_i2c_driver); + return amba_driver_register(&nmk_i2c_driver); } static void __exit nmk_i2c_exit(void) { - platform_driver_unregister(&nmk_i2c_driver); + amba_driver_unregister(&nmk_i2c_driver); } subsys_initcall(nmk_i2c_init); @@ -1065,4 +1080,3 @@ module_exit(nmk_i2c_exit); MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR"); MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 75194c579b6d..bffd5501ac2d 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -10,40 +10,9 @@ */ /* - * Device tree configuration: - * - * Required properties: - * - compatible : "opencores,i2c-ocores" - * - reg : bus address start and address range size of device - * - interrupts : interrupt number - * - regstep : size of device registers in bytes - * - clock-frequency : frequency of bus clock in Hz - * - * Example: - * - * i2c0: ocores@a0000000 { - * compatible = "opencores,i2c-ocores"; - * reg = <0xa0000000 0x8>; - * interrupts = <10>; - * - * regstep = <1>; - * clock-frequency = <20000000>; - * - * -- Devices connected on this I2C bus get - * -- defined here; address- and size-cells - * -- apply to these child devices - * - * #address-cells = <1>; - * #size-cells = <0>; - * - * dummy@60 { - * compatible = "dummy"; - * reg = <60>; - * }; - * }; - * + * This driver can be used from the device tree, see + * Documentation/devicetree/bindings/i2c/ocore-i2c.txt */ - #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -56,10 +25,12 @@ #include <linux/slab.h> #include <linux/io.h> #include <linux/of_i2c.h> +#include <linux/log2.h> struct ocores_i2c { void __iomem *base; - int regstep; + u32 reg_shift; + u32 reg_io_width; wait_queue_head_t wait; struct i2c_adapter adap; struct i2c_msg *msg; @@ -102,12 +73,22 @@ struct ocores_i2c { static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) { - iowrite8(value, i2c->base + reg * i2c->regstep); + if (i2c->reg_io_width == 4) + iowrite32(value, i2c->base + (reg << i2c->reg_shift)); + else if (i2c->reg_io_width == 2) + iowrite16(value, i2c->base + (reg << i2c->reg_shift)); + else + iowrite8(value, i2c->base + (reg << i2c->reg_shift)); } static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg) { - return ioread8(i2c->base + reg * i2c->regstep); + if (i2c->reg_io_width == 4) + return ioread32(i2c->base + (reg << i2c->reg_shift)); + else if (i2c->reg_io_width == 2) + return ioread16(i2c->base + (reg << i2c->reg_shift)); + else + return ioread8(i2c->base + (reg << i2c->reg_shift)); } static void ocores_process(struct ocores_i2c *i2c) @@ -247,26 +228,35 @@ static struct i2c_adapter ocores_adapter = { }; #ifdef CONFIG_OF -static int ocores_i2c_of_probe(struct platform_device* pdev, - struct ocores_i2c* i2c) +static int ocores_i2c_of_probe(struct platform_device *pdev, + struct ocores_i2c *i2c) { - const __be32* val; - - val = of_get_property(pdev->dev.of_node, "regstep", NULL); - if (!val) { - dev_err(&pdev->dev, "Missing required parameter 'regstep'"); - return -ENODEV; + struct device_node *np = pdev->dev.of_node; + u32 val; + + if (of_property_read_u32(np, "reg-shift", &i2c->reg_shift)) { + /* no 'reg-shift', check for deprecated 'regstep' */ + if (!of_property_read_u32(np, "regstep", &val)) { + if (!is_power_of_2(val)) { + dev_err(&pdev->dev, "invalid regstep %d\n", + val); + return -EINVAL; + } + i2c->reg_shift = ilog2(val); + dev_warn(&pdev->dev, + "regstep property deprecated, use reg-shift\n"); + } } - i2c->regstep = be32_to_cpup(val); - val = of_get_property(pdev->dev.of_node, "clock-frequency", NULL); - if (!val) { + if (of_property_read_u32(np, "clock-frequency", &val)) { dev_err(&pdev->dev, - "Missing required parameter 'clock-frequency'"); + "Missing required parameter 'clock-frequency'\n"); return -ENODEV; } - i2c->clock_khz = be32_to_cpup(val) / 1000; + i2c->clock_khz = val / 1000; + of_property_read_u32(pdev->dev.of_node, "reg-io-width", + &i2c->reg_io_width); return 0; } #else @@ -308,7 +298,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (pdata) { - i2c->regstep = pdata->regstep; + i2c->reg_shift = pdata->reg_shift; + i2c->reg_io_width = pdata->reg_io_width; i2c->clock_khz = pdata->clock_khz; } else { ret = ocores_i2c_of_probe(pdev, i2c); @@ -316,6 +307,9 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) return ret; } + if (i2c->reg_io_width == 0) + i2c->reg_io_width = 1; /* Set to default value */ + ocores_init(i2c); init_waitqueue_head(&i2c->wait); @@ -351,7 +345,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) return 0; } -static int __devexit ocores_i2c_remove(struct platform_device* pdev) +static int __devexit ocores_i2c_remove(struct platform_device *pdev) { struct ocores_i2c *i2c = platform_get_drvdata(pdev); @@ -367,9 +361,9 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev) } #ifdef CONFIG_PM -static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state) +static int ocores_i2c_suspend(struct device *dev) { - struct ocores_i2c *i2c = platform_get_drvdata(pdev); + struct ocores_i2c *i2c = dev_get_drvdata(dev); u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); /* make sure the device is disabled */ @@ -378,17 +372,19 @@ static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int ocores_i2c_resume(struct platform_device *pdev) +static int ocores_i2c_resume(struct device *dev) { - struct ocores_i2c *i2c = platform_get_drvdata(pdev); + struct ocores_i2c *i2c = dev_get_drvdata(dev); ocores_init(i2c); return 0; } + +static SIMPLE_DEV_PM_OPS(ocores_i2c_pm, ocores_i2c_suspend, ocores_i2c_resume); +#define OCORES_I2C_PM (&ocores_i2c_pm) #else -#define ocores_i2c_suspend NULL -#define ocores_i2c_resume NULL +#define OCORES_I2C_PM NULL #endif static struct of_device_id ocores_i2c_match[] = { @@ -400,12 +396,11 @@ MODULE_DEVICE_TABLE(of, ocores_i2c_match); static struct platform_driver ocores_i2c_driver = { .probe = ocores_i2c_probe, .remove = __devexit_p(ocores_i2c_remove), - .suspend = ocores_i2c_suspend, - .resume = ocores_i2c_resume, .driver = { .owner = THIS_MODULE, .name = "ocores-i2c", .of_match_table = ocores_i2c_match, + .pm = OCORES_I2C_PM, }, }; diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index ee139a598814..f44c83549fe5 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -2,7 +2,7 @@ * (C) Copyright 2009-2010 * Nokia Siemens Networks, michael.lawnick.ext@nsn.com * - * Portions Copyright (C) 2010 Cavium Networks, Inc. + * Portions Copyright (C) 2010, 2011 Cavium Networks, Inc. * * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors. * @@ -11,17 +11,18 @@ * warranty of any kind, whether express or implied. */ +#include <linux/platform_device.h> +#include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_i2c.h> +#include <linux/delay.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/init.h> - -#include <linux/io.h> #include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/of.h> #include <asm/octeon/octeon.h> @@ -65,7 +66,7 @@ struct octeon_i2c { wait_queue_head_t queue; struct i2c_adapter adap; int irq; - int twsi_freq; + u32 twsi_freq; int sys_freq; resource_size_t twsi_phys; void __iomem *twsi_base; @@ -121,10 +122,8 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) */ static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) { - u64 tmp; - __raw_writeq(data, i2c->twsi_base + TWSI_INT); - tmp = __raw_readq(i2c->twsi_base + TWSI_INT); + __raw_readq(i2c->twsi_base + TWSI_INT); } /** @@ -515,7 +514,6 @@ static int __devinit octeon_i2c_probe(struct platform_device *pdev) { int irq, result = 0; struct octeon_i2c *i2c; - struct octeon_i2c_data *i2c_data; struct resource *res_mem; /* All adaptors have an irq. */ @@ -523,86 +521,90 @@ static int __devinit octeon_i2c_probe(struct platform_device *pdev) if (irq < 0) return irq; - i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) { dev_err(&pdev->dev, "kzalloc failed\n"); result = -ENOMEM; goto out; } i2c->dev = &pdev->dev; - i2c_data = pdev->dev.platform_data; res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res_mem == NULL) { dev_err(i2c->dev, "found no memory resource\n"); result = -ENXIO; - goto fail_region; + goto out; } + i2c->twsi_phys = res_mem->start; + i2c->regsize = resource_size(res_mem); - if (i2c_data == NULL) { - dev_err(i2c->dev, "no I2C frequency data\n"); + /* + * "clock-rate" is a legacy binding, the official binding is + * "clock-frequency". Try the official one first and then + * fall back if it doesn't exist. + */ + if (of_property_read_u32(pdev->dev.of_node, + "clock-frequency", &i2c->twsi_freq) && + of_property_read_u32(pdev->dev.of_node, + "clock-rate", &i2c->twsi_freq)) { + dev_err(i2c->dev, + "no I2C 'clock-rate' or 'clock-frequency' property\n"); result = -ENXIO; - goto fail_region; + goto out; } - i2c->twsi_phys = res_mem->start; - i2c->regsize = resource_size(res_mem); - i2c->twsi_freq = i2c_data->i2c_freq; - i2c->sys_freq = i2c_data->sys_freq; + i2c->sys_freq = octeon_get_io_clock_rate(); - if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) { + if (!devm_request_mem_region(&pdev->dev, i2c->twsi_phys, i2c->regsize, + res_mem->name)) { dev_err(i2c->dev, "request_mem_region failed\n"); - goto fail_region; + goto out; } - i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize); + i2c->twsi_base = devm_ioremap(&pdev->dev, i2c->twsi_phys, i2c->regsize); init_waitqueue_head(&i2c->queue); i2c->irq = irq; - result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c); + result = devm_request_irq(&pdev->dev, i2c->irq, + octeon_i2c_isr, 0, DRV_NAME, i2c); if (result < 0) { dev_err(i2c->dev, "failed to attach interrupt\n"); - goto fail_irq; + goto out; } result = octeon_i2c_initlowlevel(i2c); if (result) { dev_err(i2c->dev, "init low level failed\n"); - goto fail_add; + goto out; } result = octeon_i2c_setclock(i2c); if (result) { dev_err(i2c->dev, "clock init failed\n"); - goto fail_add; + goto out; } i2c->adap = octeon_i2c_ops; i2c->adap.dev.parent = &pdev->dev; - i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; + i2c->adap.dev.of_node = pdev->dev.of_node; i2c_set_adapdata(&i2c->adap, i2c); platform_set_drvdata(pdev, i2c); - result = i2c_add_numbered_adapter(&i2c->adap); + result = i2c_add_adapter(&i2c->adap); if (result < 0) { dev_err(i2c->dev, "failed to add adapter\n"); goto fail_add; } - dev_info(i2c->dev, "version %s\n", DRV_VERSION); - return result; + of_i2c_register_devices(&i2c->adap); + + return 0; fail_add: platform_set_drvdata(pdev, NULL); - free_irq(i2c->irq, i2c); -fail_irq: - iounmap(i2c->twsi_base); - release_mem_region(i2c->twsi_phys, i2c->regsize); -fail_region: - kfree(i2c); out: return result; }; @@ -613,19 +615,24 @@ static int __devexit octeon_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&i2c->adap); platform_set_drvdata(pdev, NULL); - free_irq(i2c->irq, i2c); - iounmap(i2c->twsi_base); - release_mem_region(i2c->twsi_phys, i2c->regsize); - kfree(i2c); return 0; }; +static struct of_device_id octeon_i2c_match[] = { + { + .compatible = "cavium,octeon-3860-twsi", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, octeon_i2c_match); + static struct platform_driver octeon_i2c_driver = { .probe = octeon_i2c_probe, .remove = __devexit_p(octeon_i2c_remove), .driver = { .owner = THIS_MODULE, .name = DRV_NAME, + .of_match_table = octeon_i2c_match, }, }; @@ -635,4 +642,3 @@ MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>"); MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 801df6000e9b..6849635b268a 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -49,8 +49,8 @@ /* I2C controller revisions present on specific hardware */ #define OMAP_I2C_REV_ON_2430 0x36 -#define OMAP_I2C_REV_ON_3430 0x3C -#define OMAP_I2C_REV_ON_3530_4430 0x40 +#define OMAP_I2C_REV_ON_3430_3530 0x3C +#define OMAP_I2C_REV_ON_3630_4430 0x40 /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -173,7 +173,7 @@ enum { /* Errata definitions */ #define I2C_OMAP_ERRATA_I207 (1 << 0) -#define I2C_OMAP3_1P153 (1 << 1) +#define I2C_OMAP_ERRATA_I462 (1 << 1) struct omap_i2c_dev { struct device *dev; @@ -269,47 +269,6 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) (i2c_dev->regs[reg] << i2c_dev->reg_shift)); } -static void omap_i2c_unidle(struct omap_i2c_dev *dev) -{ - if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) { - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); - omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate); - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); - omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate); - omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate); - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate); - omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); - } - - /* - * Don't write to this register if the IE state is 0 as it can - * cause deadlock. - */ - if (dev->iestate) - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); -} - -static void omap_i2c_idle(struct omap_i2c_dev *dev) -{ - u16 iv; - - dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); - if (dev->dtrev == OMAP_I2C_IP_VERSION_2) - omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1); - else - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); - - if (dev->rev < OMAP_I2C_OMAP1_REV_2) { - iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ - } else { - omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate); - - /* Flush posted write */ - omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); - } -} - static int omap_i2c_init(struct omap_i2c_dev *dev) { u16 psc = 0, scll = 0, sclh = 0, buf = 0; @@ -346,7 +305,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_AUTOIDLE_MASK); - } else if (dev->rev >= OMAP_I2C_REV_ON_3430) { + } else if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) { dev->syscstate = SYSC_AUTOIDLE_MASK; dev->syscstate |= SYSC_ENAWAKEUP_MASK; dev->syscstate |= (SYSC_IDLEMODE_SMART << @@ -468,11 +427,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) /* Take the I2C module out of reset: */ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); - dev->errata = 0; - - if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207) - dev->errata |= I2C_OMAP_ERRATA_I207; - /* Enable interrupts */ dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | @@ -514,7 +468,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct omap_i2c_dev *dev = i2c_get_adapdata(adap); - int r; + unsigned long timeout; u16 w; dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", @@ -536,7 +490,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w); - init_completion(&dev->cmd_complete); + INIT_COMPLETION(dev->cmd_complete); dev->cmd_err = 0; w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; @@ -545,6 +499,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, if (dev->speed > 400) w |= OMAP_I2C_CON_OPMODE_HS; + if (msg->flags & I2C_M_STOP) + stop = 1; if (msg->flags & I2C_M_TEN) w |= OMAP_I2C_CON_XA; if (!(msg->flags & I2C_M_RD)) @@ -582,12 +538,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, * REVISIT: We should abort the transfer on signals, but the bus goes * into arbitration and we're currently unable to recover from it. */ - r = wait_for_completion_timeout(&dev->cmd_complete, - OMAP_I2C_TIMEOUT); + timeout = wait_for_completion_timeout(&dev->cmd_complete, + OMAP_I2C_TIMEOUT); dev->buf_len = 0; - if (r < 0) - return r; - if (r == 0) { + if (timeout == 0) { dev_err(dev->dev, "controller timed out\n"); omap_i2c_init(dev); return -ETIMEDOUT; @@ -628,7 +582,9 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) int i; int r; - pm_runtime_get_sync(dev->dev); + r = pm_runtime_get_sync(dev->dev); + if (IS_ERR_VALUE(r)) + return r; r = omap_i2c_wait_for_bb(dev); if (r < 0) @@ -658,7 +614,8 @@ out: static u32 omap_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | + I2C_FUNC_PROTOCOL_MANGLING; } static inline void @@ -764,11 +721,11 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id) #endif /* - * OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing + * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing * data to DATA_REG. Otherwise some data bytes can be lost while transferring * them from the memory to the I2C interface. */ -static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err) +static int errata_omap3_i462(struct omap_i2c_dev *dev, u16 *stat, int *err) { unsigned long timeout = 10000; @@ -776,7 +733,6 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err) if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); - *err |= OMAP_I2C_STAT_XUDF; return -ETIMEDOUT; } @@ -789,6 +745,7 @@ static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err) return 0; } + *err |= OMAP_I2C_STAT_XUDF; return 0; } @@ -927,8 +884,8 @@ complete: break; } - if ((dev->errata & I2C_OMAP3_1P153) && - errata_omap3_1p153(dev, &stat, &err)) + if ((dev->errata & I2C_OMAP_ERRATA_I462) && + errata_omap3_i462(dev, &stat, &err)) goto complete; omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); @@ -1045,6 +1002,7 @@ omap_i2c_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, dev); + init_completion(&dev->cmd_complete); dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3; @@ -1054,12 +1012,19 @@ omap_i2c_probe(struct platform_device *pdev) dev->regs = (u8 *)reg_map_ip_v1; pm_runtime_enable(dev->dev); - pm_runtime_get_sync(dev->dev); + r = pm_runtime_get_sync(dev->dev); + if (IS_ERR_VALUE(r)) + goto err_free_mem; dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; - if (dev->rev <= OMAP_I2C_REV_ON_3430) - dev->errata |= I2C_OMAP3_1P153; + dev->errata = 0; + + if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207) + dev->errata |= I2C_OMAP_ERRATA_I207; + + if (dev->rev <= OMAP_I2C_REV_ON_3430_3530) + dev->errata |= I2C_OMAP_ERRATA_I462; if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) { u16 s; @@ -1076,7 +1041,7 @@ omap_i2c_probe(struct platform_device *pdev) dev->fifo_size = (dev->fifo_size / 2); - if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) + if (dev->rev >= OMAP_I2C_REV_ON_3630_4430) dev->b_hw = 0; /* Disable hardware fixes */ else dev->b_hw = 1; /* Enable hardware fixes */ @@ -1092,7 +1057,7 @@ omap_i2c_probe(struct platform_device *pdev) isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr : omap_i2c_isr; - r = request_irq(dev->irq, isr, 0, pdev->name, dev); + r = request_irq(dev->irq, isr, IRQF_NO_SUSPEND, pdev->name, dev); if (r) { dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); @@ -1102,8 +1067,6 @@ omap_i2c_probe(struct platform_device *pdev) dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); - pm_runtime_put(dev->dev); - adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; @@ -1123,6 +1086,8 @@ omap_i2c_probe(struct platform_device *pdev) of_i2c_register_devices(adap); + pm_runtime_put(dev->dev); + return 0; err_free_irq: @@ -1131,6 +1096,7 @@ err_unuse_clocks: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); pm_runtime_put(dev->dev); iounmap(dev->base); + pm_runtime_disable(&pdev->dev); err_free_mem: platform_set_drvdata(pdev, NULL); kfree(dev); @@ -1140,17 +1106,23 @@ err_release_region: return r; } -static int -omap_i2c_remove(struct platform_device *pdev) +static int __devexit omap_i2c_remove(struct platform_device *pdev) { struct omap_i2c_dev *dev = platform_get_drvdata(pdev); struct resource *mem; + int ret; platform_set_drvdata(pdev, NULL); free_irq(dev->irq, dev); i2c_del_adapter(&dev->adapter); + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) + return ret; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); iounmap(dev->base); kfree(dev); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1158,13 +1130,26 @@ omap_i2c_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM #ifdef CONFIG_PM_RUNTIME static int omap_i2c_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct omap_i2c_dev *_dev = platform_get_drvdata(pdev); + u16 iv; + + _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG); + + omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0); - omap_i2c_idle(_dev); + if (_dev->rev < OMAP_I2C_OMAP1_REV_2) { + iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */ + } else { + omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate); + + /* Flush posted write */ + omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG); + } return 0; } @@ -1174,23 +1159,40 @@ static int omap_i2c_runtime_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct omap_i2c_dev *_dev = platform_get_drvdata(pdev); - omap_i2c_unidle(_dev); + if (_dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) { + omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, 0); + omap_i2c_write_reg(_dev, OMAP_I2C_PSC_REG, _dev->pscstate); + omap_i2c_write_reg(_dev, OMAP_I2C_SCLL_REG, _dev->scllstate); + omap_i2c_write_reg(_dev, OMAP_I2C_SCLH_REG, _dev->sclhstate); + omap_i2c_write_reg(_dev, OMAP_I2C_BUF_REG, _dev->bufstate); + omap_i2c_write_reg(_dev, OMAP_I2C_SYSC_REG, _dev->syscstate); + omap_i2c_write_reg(_dev, OMAP_I2C_WE_REG, _dev->westate); + omap_i2c_write_reg(_dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); + } + + /* + * Don't write to this register if the IE state is 0 as it can + * cause deadlock. + */ + if (_dev->iestate) + omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, _dev->iestate); return 0; } +#endif /* CONFIG_PM_RUNTIME */ static struct dev_pm_ops omap_i2c_pm_ops = { - .runtime_suspend = omap_i2c_runtime_suspend, - .runtime_resume = omap_i2c_runtime_resume, + SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend, + omap_i2c_runtime_resume, NULL) }; #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) #else #define OMAP_I2C_PM_OPS NULL -#endif +#endif /* CONFIG_PM */ static struct platform_driver omap_i2c_driver = { .probe = omap_i2c_probe, - .remove = omap_i2c_remove, + .remove = __devexit_p(omap_i2c_remove), .driver = { .name = "omap_i2c", .owner = THIS_MODULE, diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index eaaea73209c5..12edefd4183a 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -415,19 +415,8 @@ static struct pci_driver pasemi_smb_driver = { .remove = __devexit_p(pasemi_smb_remove), }; -static int __init pasemi_smb_init(void) -{ - return pci_register_driver(&pasemi_smb_driver); -} - -static void __exit pasemi_smb_exit(void) -{ - pci_unregister_driver(&pasemi_smb_driver); -} +module_pci_driver(pasemi_smb_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>"); MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); - -module_init(pasemi_smb_init); -module_exit(pasemi_smb_exit); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c14d48dd601a..ef511df2c965 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -21,11 +21,12 @@ Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 - ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 + ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 AMD Hudson-2 SMSC Victory66 - Note: we assume there can only be one device, with one SMBus interface. + Note: we assume there can only be one device, with one or more + SMBus interfaces. */ #include <linux/module.h> @@ -94,10 +95,8 @@ MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); -static unsigned short piix4_smba; static int srvrworks_csb5_delay; static struct pci_driver piix4_driver; -static struct i2c_adapter piix4_adapter; static struct dmi_system_id __devinitdata piix4_dmi_blacklist[] = { { @@ -127,10 +126,15 @@ static struct dmi_system_id __devinitdata piix4_dmi_ibm[] = { { }, }; +struct i2c_piix4_adapdata { + unsigned short smba; +}; + static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { unsigned char temp; + unsigned short piix4_smba; if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) @@ -206,7 +210,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, dev_err(&PIIX4_dev->dev, "Host SMBus controller not enabled!\n"); release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; return -ENODEV; } } @@ -224,12 +227,13 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, temp); - return 0; + return piix4_smba; } static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { + unsigned short piix4_smba; unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; @@ -273,7 +277,6 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " "0x%x already in use!\n", piix4_smba + i2ccfg_offset); release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; return -EBUSY; } i2ccfg = inb_p(piix4_smba + i2ccfg_offset); @@ -288,30 +291,72 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, i2ccfg >> 4); - return 0; + return piix4_smba; +} + +static int __devinit piix4_setup_aux(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id, + unsigned short base_reg_addr) +{ + /* Set up auxiliary SMBus controllers found on some + * AMD chipsets e.g. SP5100 (SB700 derivative) */ + + unsigned short piix4_smba; + + /* Read address of auxiliary SMBus controller */ + pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); + if ((piix4_smba & 1) == 0) { + dev_dbg(&PIIX4_dev->dev, + "Auxiliary SMBus controller not enabled\n"); + return -ENODEV; + } + + piix4_smba &= 0xfff0; + if (piix4_smba == 0) { + dev_dbg(&PIIX4_dev->dev, + "Auxiliary SMBus base address uninitialized\n"); + return -ENODEV; + } + + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -ENODEV; + + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { + dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " + "already in use!\n", piix4_smba); + return -EBUSY; + } + + dev_info(&PIIX4_dev->dev, + "Auxiliary SMBus Host Controller at 0x%x\n", + piix4_smba); + + return piix4_smba; } -static int piix4_transaction(void) +static int piix4_transaction(struct i2c_adapter *piix4_adapter) { + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter); + unsigned short piix4_smba = adapdata->smba; int temp; int result = 0; int timeout = 0; - dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) != 0x00) { - dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). " + dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { - dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); + dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); return -EBUSY; } else { - dev_dbg(&piix4_adapter.dev, "Successful!\n"); + dev_dbg(&piix4_adapter->dev, "Successful!\n"); } } @@ -330,35 +375,35 @@ static int piix4_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout == MAX_TIMEOUT) { - dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); + dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } if (temp & 0x10) { result = -EIO; - dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); + dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); } if (temp & 0x08) { result = -EIO; - dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " + dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " "locked until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & 0x04) { result = -ENXIO; - dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); + dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); } if (inb_p(SMBHSTSTS) != 0x00) outb_p(inb(SMBHSTSTS), SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { - dev_err(&piix4_adapter.dev, "Failed reset at end of " + dev_err(&piix4_adapter->dev, "Failed reset at end of " "transaction (%02x)\n", temp); } - dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); @@ -370,6 +415,8 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + unsigned short piix4_smba = adapdata->smba; int i, len; int status; @@ -426,7 +473,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); - status = piix4_transaction(); + status = piix4_transaction(adap); if (status) return status; @@ -466,12 +513,6 @@ static const struct i2c_algorithm smbus_algorithm = { .functionality = piix4_func, }; -static struct i2c_adapter piix4_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .algo = &smbus_algorithm, -}; - static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, @@ -496,6 +537,57 @@ static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { MODULE_DEVICE_TABLE (pci, piix4_ids); +static struct i2c_adapter *piix4_main_adapter; +static struct i2c_adapter *piix4_aux_adapter; + +static int __devinit piix4_add_adapter(struct pci_dev *dev, + unsigned short smba, + struct i2c_adapter **padap) +{ + struct i2c_adapter *adap; + struct i2c_piix4_adapdata *adapdata; + int retval; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (adap == NULL) { + release_region(smba, SMBIOSIZE); + return -ENOMEM; + } + + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adap->algo = &smbus_algorithm; + + adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); + if (adapdata == NULL) { + kfree(adap); + release_region(smba, SMBIOSIZE); + return -ENOMEM; + } + + adapdata->smba = smba; + + /* set up the sysfs linkage to our parent device */ + adap->dev.parent = &dev->dev; + + snprintf(adap->name, sizeof(adap->name), + "SMBus PIIX4 adapter at %04x", smba); + + i2c_set_adapdata(adap, adapdata); + + retval = i2c_add_adapter(adap); + if (retval) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + kfree(adapdata); + kfree(adap); + release_region(smba, SMBIOSIZE); + return retval; + } + + *padap = adap; + return 0; +} + static int __devinit piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) { @@ -510,30 +602,52 @@ static int __devinit piix4_probe(struct pci_dev *dev, else retval = piix4_setup(dev, id); - if (retval) + /* If no main SMBus found, give up */ + if (retval < 0) return retval; - /* set up the sysfs linkage to our parent device */ - piix4_adapter.dev.parent = &dev->dev; - - snprintf(piix4_adapter.name, sizeof(piix4_adapter.name), - "SMBus PIIX4 adapter at %04x", piix4_smba); + /* Try to register main SMBus adapter, give up if we can't */ + retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); + if (retval < 0) + return retval; - if ((retval = i2c_add_adapter(&piix4_adapter))) { - dev_err(&dev->dev, "Couldn't register adapter!\n"); - release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; + /* Check for auxiliary SMBus on some AMD chipsets */ + if (dev->vendor == PCI_VENDOR_ID_ATI && + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && + dev->revision < 0x40) { + retval = piix4_setup_aux(dev, id, 0x58); + if (retval > 0) { + /* Try to add the aux adapter if it exists, + * piix4_add_adapter will clean up if this fails */ + piix4_add_adapter(dev, retval, &piix4_aux_adapter); + } } - return retval; + return 0; +} + +static void __devexit piix4_adap_remove(struct i2c_adapter *adap) +{ + struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + + if (adapdata->smba) { + i2c_del_adapter(adap); + release_region(adapdata->smba, SMBIOSIZE); + kfree(adapdata); + kfree(adap); + } } static void __devexit piix4_remove(struct pci_dev *dev) { - if (piix4_smba) { - i2c_del_adapter(&piix4_adapter); - release_region(piix4_smba, SMBIOSIZE); - piix4_smba = 0; + if (piix4_main_adapter) { + piix4_adap_remove(piix4_main_adapter); + piix4_main_adapter = NULL; + } + + if (piix4_aux_adapter) { + piix4_adap_remove(piix4_aux_adapter); + piix4_aux_adapter = NULL; } } @@ -544,20 +658,9 @@ static struct pci_driver piix4_driver = { .remove = __devexit_p(piix4_remove), }; -static int __init i2c_piix4_init(void) -{ - return pci_register_driver(&piix4_driver); -} - -static void __exit i2c_piix4_exit(void) -{ - pci_unregister_driver(&piix4_driver); -} +module_pci_driver(piix4_driver); MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " "Philip Edelbrock <phil@netroedge.com>"); MODULE_DESCRIPTION("PIIX4 SMBus driver"); MODULE_LICENSE("GPL"); - -module_init(i2c_piix4_init); -module_exit(i2c_piix4_exit); diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index 07b7447ecbc9..3d71395ae1f7 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -306,8 +306,7 @@ static int __devinit pmcmsptwi_probe(struct platform_device *pldev) pmcmsptwi_data.irq = platform_get_irq(pldev, 0); if (pmcmsptwi_data.irq) { rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - pldev->name, &pmcmsptwi_data); + IRQF_SHARED, pldev->name, &pmcmsptwi_data); if (rc == 0) { /* * Enable 'DONE' interrupt only. diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 99389d2eae51..5d54416770b0 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -587,25 +587,27 @@ static struct i2c_algorithm pnx_algorithm = { }; #ifdef CONFIG_PM -static int i2c_pnx_controller_suspend(struct platform_device *pdev, - pm_message_t state) +static int i2c_pnx_controller_suspend(struct device *dev) { - struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); + struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev); clk_disable(alg_data->clk); return 0; } -static int i2c_pnx_controller_resume(struct platform_device *pdev) +static int i2c_pnx_controller_resume(struct device *dev) { - struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); + struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev); return clk_enable(alg_data->clk); } + +static SIMPLE_DEV_PM_OPS(i2c_pnx_pm, + i2c_pnx_controller_suspend, i2c_pnx_controller_resume); +#define PNX_I2C_PM (&i2c_pnx_pm) #else -#define i2c_pnx_controller_suspend NULL -#define i2c_pnx_controller_resume NULL +#define PNX_I2C_PM NULL #endif static int __devinit i2c_pnx_probe(struct platform_device *pdev) @@ -783,11 +785,10 @@ static struct platform_driver i2c_pnx_driver = { .name = "pnx-i2c", .owner = THIS_MODULE, .of_match_table = of_match_ptr(i2c_pnx_of_match), + .pm = PNX_I2C_PM, }, .probe = i2c_pnx_probe, .remove = __devexit_p(i2c_pnx_remove), - .suspend = i2c_pnx_controller_suspend, - .resume = i2c_pnx_controller_resume, }; static int __init i2c_adap_pnx_init(void) diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 31c47e18d83c..5285f8565de4 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -227,28 +227,138 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev) return 0; } +static u32 __devinit i2c_powermac_get_addr(struct i2c_adapter *adap, + struct pmac_i2c_bus *bus, + struct device_node *node) +{ + const __be32 *prop; + int len; + + /* First check for valid "reg" */ + prop = of_get_property(node, "reg", &len); + if (prop && (len >= sizeof(int))) + return (be32_to_cpup(prop) & 0xff) >> 1; + + /* Then check old-style "i2c-address" */ + prop = of_get_property(node, "i2c-address", &len); + if (prop && (len >= sizeof(int))) + return (be32_to_cpup(prop) & 0xff) >> 1; + + /* Now handle some devices with missing "reg" properties */ + if (!strcmp(node->name, "cereal")) + return 0x60; + else if (!strcmp(node->name, "deq")) + return 0x34; + + dev_warn(&adap->dev, "No i2c address for %s\n", node->full_name); + + return 0xffffffff; +} + +static void __devinit i2c_powermac_create_one(struct i2c_adapter *adap, + const char *type, + u32 addr) +{ + struct i2c_board_info info = {}; + struct i2c_client *newdev; + + strncpy(info.type, type, sizeof(info.type)); + info.addr = addr; + newdev = i2c_new_device(adap, &info); + if (!newdev) + dev_err(&adap->dev, + "i2c-powermac: Failure to register missing %s\n", + type); +} + +static void __devinit i2c_powermac_add_missing(struct i2c_adapter *adap, + struct pmac_i2c_bus *bus, + bool found_onyx) +{ + struct device_node *busnode = pmac_i2c_get_bus_node(bus); + int rc; + + /* Check for the onyx audio codec */ +#define ONYX_REG_CONTROL 67 + if (of_device_is_compatible(busnode, "k2-i2c") && !found_onyx) { + union i2c_smbus_data data; + + rc = i2c_smbus_xfer(adap, 0x46, 0, I2C_SMBUS_READ, + ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA, + &data); + if (rc >= 0) + i2c_powermac_create_one(adap, "MAC,pcm3052", 0x46); + + rc = i2c_smbus_xfer(adap, 0x47, 0, I2C_SMBUS_READ, + ONYX_REG_CONTROL, I2C_SMBUS_BYTE_DATA, + &data); + if (rc >= 0) + i2c_powermac_create_one(adap, "MAC,pcm3052", 0x47); + } +} + +static bool __devinit i2c_powermac_get_type(struct i2c_adapter *adap, + struct device_node *node, + u32 addr, char *type, int type_size) +{ + char tmp[16]; + + /* Note: we to _NOT_ want the standard + * i2c drivers to match with any of our powermac stuff + * unless they have been specifically modified to handle + * it on a case by case basis. For example, for thermal + * control, things like lm75 etc... shall match with their + * corresponding windfarm drivers, _NOT_ the generic ones, + * so we force a prefix of AAPL, onto the modalias to + * make that happen + */ + + /* First try proper modalias */ + if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) { + snprintf(type, type_size, "MAC,%s", tmp); + return true; + } + + /* Now look for known workarounds */ + if (!strcmp(node->name, "deq")) { + /* Apple uses address 0x34 for TAS3001 and 0x35 for TAS3004 */ + if (addr == 0x34) { + snprintf(type, type_size, "MAC,tas3001"); + return true; + } else if (addr == 0x35) { + snprintf(type, type_size, "MAC,tas3004"); + return true; + } + } + + dev_err(&adap->dev, "i2c-powermac: modalias failure" + " on %s\n", node->full_name); + return false; +} + static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, struct pmac_i2c_bus *bus) { struct i2c_client *newdev; struct device_node *node; + bool found_onyx = 0; + + /* + * In some cases we end up with the via-pmu node itself, in this + * case we skip this function completely as the device-tree will + * not contain anything useful. + */ + if (!strcmp(adap->dev.of_node->name, "via-pmu")) + return; for_each_child_of_node(adap->dev.of_node, node) { struct i2c_board_info info = {}; - struct dev_archdata dev_ad = {}; - const __be32 *reg; - char tmp[16]; u32 addr; - int len; /* Get address & channel */ - reg = of_get_property(node, "reg", &len); - if (!reg || (len < sizeof(int))) { - dev_err(&adap->dev, "i2c-powermac: invalid reg on %s\n", - node->full_name); + addr = i2c_powermac_get_addr(adap, bus, node); + if (addr == 0xffffffff) continue; - } - addr = be32_to_cpup(reg); /* Multibus setup, check channel */ if (!pmac_i2c_match_adapter(node, adap)) @@ -257,27 +367,23 @@ static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, dev_dbg(&adap->dev, "i2c-powermac: register %s\n", node->full_name); - /* Make up a modalias. Note: we to _NOT_ want the standard - * i2c drivers to match with any of our powermac stuff - * unless they have been specifically modified to handle - * it on a case by case basis. For example, for thermal - * control, things like lm75 etc... shall match with their - * corresponding windfarm drivers, _NOT_ the generic ones, - * so we force a prefix of AAPL, onto the modalias to - * make that happen + /* + * Keep track of some device existence to handle + * workarounds later. */ - if (of_modalias_node(node, tmp, sizeof(tmp)) < 0) { - dev_err(&adap->dev, "i2c-powermac: modalias failure" - " on %s\n", node->full_name); + if (of_device_is_compatible(node, "pcm3052")) + found_onyx = true; + + /* Make up a modalias */ + if (!i2c_powermac_get_type(adap, node, addr, + info.type, sizeof(info.type))) { continue; } - snprintf(info.type, sizeof(info.type), "MAC,%s", tmp); /* Fill out the rest of the info structure */ - info.addr = (addr & 0xff) >> 1; + info.addr = addr; info.irq = irq_of_parse_and_map(node, 0); info.of_node = of_node_get(node); - info.archdata = &dev_ad; newdev = i2c_new_device(adap, &info); if (!newdev) { @@ -292,6 +398,9 @@ static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap, continue; } } + + /* Additional workarounds */ + i2c_powermac_add_missing(adap, bus, found_onyx); } static int __devinit i2c_powermac_probe(struct platform_device *dev) diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c index 93709fbe30eb..d8515be00b98 100644 --- a/drivers/i2c/busses/i2c-puv3.c +++ b/drivers/i2c/busses/i2c-puv3.c @@ -254,7 +254,7 @@ static int __devexit puv3_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state) +static int puv3_i2c_suspend(struct device *dev) { int poll_count; /* Disable the IIC */ @@ -267,23 +267,20 @@ static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state) return 0; } -static int puv3_i2c_resume(struct platform_device *dev) -{ - return 0 ; -} +static SIMPLE_DEV_PM_OPS(puv3_i2c_pm, puv3_i2c_suspend, NULL); +#define PUV3_I2C_PM (&puv3_i2c_pm) + #else -#define puv3_i2c_suspend NULL -#define puv3_i2c_resume NULL +#define PUV3_I2C_PM NULL #endif static struct platform_driver puv3_i2c_driver = { .probe = puv3_i2c_probe, .remove = __devexit_p(puv3_i2c_remove), - .suspend = puv3_i2c_suspend, - .resume = puv3_i2c_resume, .driver = { .name = "PKUnity-v3-I2C", .owner = THIS_MODULE, + .pm = PUV3_I2C_PM, } }; diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c index a05817980556..4dc9bef17d77 100644 --- a/drivers/i2c/busses/i2c-pxa-pci.c +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -163,17 +163,7 @@ static struct pci_driver ce4100_i2c_driver = { .remove = __devexit_p(ce4100_i2c_remove), }; -static int __init ce4100_i2c_init(void) -{ - return pci_register_driver(&ce4100_i2c_driver); -} -module_init(ce4100_i2c_init); - -static void __exit ce4100_i2c_exit(void) -{ - pci_unregister_driver(&ce4100_i2c_driver); -} -module_exit(ce4100_i2c_exit); +module_pci_driver(ce4100_i2c_driver); MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index a997c7d3f95d..1034d93fb838 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -41,13 +41,6 @@ #include <asm/irq.h> -#ifndef CONFIG_HAVE_CLK -#define clk_get(dev, id) NULL -#define clk_put(clk) do { } while (0) -#define clk_disable(clk) do { } while (0) -#define clk_enable(clk) do { } while (0) -#endif - struct pxa_reg_layout { u32 ibmr; u32 idbr; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 01959154572d..5ae3b0236bd3 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -122,7 +122,7 @@ static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pde { if (pdev->dev.of_node) { const struct of_device_id *match; - match = of_match_node(&s3c24xx_i2c_match, pdev->dev.of_node); + match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node); return (unsigned int)match->data; } @@ -609,7 +609,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, if (ret != -EAGAIN) { clk_disable(i2c->clk); - pm_runtime_put_sync(&adap->dev); + pm_runtime_put(&adap->dev); return ret; } @@ -619,7 +619,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, } clk_disable(i2c->clk); - pm_runtime_put_sync(&adap->dev); + pm_runtime_put(&adap->dev); return -EREMOTEIO; } diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 15cf78f65ce0..5d6723b7525e 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -513,21 +513,8 @@ static struct pci_driver sis630_driver = { .remove = __devexit_p(sis630_remove), }; -static int __init i2c_sis630_init(void) -{ - return pci_register_driver(&sis630_driver); -} - - -static void __exit i2c_sis630_exit(void) -{ - pci_unregister_driver(&sis630_driver); -} - +module_pci_driver(sis630_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Malysh <amalysh@web.de>"); MODULE_DESCRIPTION("SIS630 SMBus driver"); - -module_init(i2c_sis630_init); -module_exit(i2c_sis630_exit); diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index cc5d149413f7..7b72614a9bc0 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -324,21 +324,8 @@ static struct pci_driver sis96x_driver = { .remove = __devexit_p(sis96x_remove), }; -static int __init i2c_sis96x_init(void) -{ - return pci_register_driver(&sis96x_driver); -} - -static void __exit i2c_sis96x_exit(void) -{ - pci_unregister_driver(&sis96x_driver); -} +module_pci_driver(sis96x_driver); MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); MODULE_DESCRIPTION("SiS96x SMBus driver"); MODULE_LICENSE("GPL"); - -/* Register initialization functions using helper macros */ -module_init(i2c_sis96x_init); -module_exit(i2c_sis96x_exit); - diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 4d44af181f37..580a0c04cb42 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007-2009 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 * ST DDC I2C master mode driver, used in e.g. U300 series platforms. * Author: Linus Walleij <linus.walleij@stericsson.com> @@ -139,8 +139,6 @@ module_param(scl_frequency, uint, 0644); * struct stu300_dev - the stu300 driver state holder * @pdev: parent platform device * @adapter: corresponding I2C adapter - * @phybase: location of I/O area in memory - * @physize: size of I/O area in memory * @clk: hardware block clock * @irq: assigned interrupt line * @cmd_issue_lock: this locks the following cmd_ variables @@ -155,8 +153,6 @@ module_param(scl_frequency, uint, 0644); struct stu300_dev { struct platform_device *pdev; struct i2c_adapter adapter; - resource_size_t phybase; - resource_size_t physize; void __iomem *virtbase; struct clk *clk; int irq; @@ -873,64 +869,44 @@ stu300_probe(struct platform_device *pdev) int ret = 0; char clk_name[] = "I2C0"; - dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL); + dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL); if (!dev) { dev_err(&pdev->dev, "could not allocate device struct\n"); - ret = -ENOMEM; - goto err_no_devmem; + return -ENOMEM; } bus_nr = pdev->id; clk_name[3] += (char)bus_nr; - dev->clk = clk_get(&pdev->dev, clk_name); + dev->clk = devm_clk_get(&pdev->dev, clk_name); if (IS_ERR(dev->clk)) { - ret = PTR_ERR(dev->clk); dev_err(&pdev->dev, "could not retrieve i2c bus clock\n"); - goto err_no_clk; + return PTR_ERR(dev->clk); } dev->pdev = pdev; - platform_set_drvdata(pdev, dev); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto err_no_resource; - } - - dev->phybase = res->start; - dev->physize = resource_size(res); - - if (request_mem_region(dev->phybase, dev->physize, - NAME " I/O Area") == NULL) { - ret = -EBUSY; - goto err_no_ioregion; - } + if (!res) + return -ENOENT; - dev->virtbase = ioremap(dev->phybase, dev->physize); + dev->virtbase = devm_request_and_ioremap(&pdev->dev, res); dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual " "base %p\n", bus_nr, dev->virtbase); - if (!dev->virtbase) { - ret = -ENOMEM; - goto err_no_ioremap; - } + if (!dev->virtbase) + return -ENOMEM; dev->irq = platform_get_irq(pdev, 0); - if (request_irq(dev->irq, stu300_irh, 0, - NAME, dev)) { - ret = -EIO; - goto err_no_irq; - } + ret = devm_request_irq(&pdev->dev, dev->irq, stu300_irh, 0, NAME, dev); + if (ret < 0) + return ret; dev->speed = scl_frequency; - clk_enable(dev->clk); + clk_prepare_enable(dev->clk); ret = stu300_init_hw(dev); clk_disable(dev->clk); - if (ret != 0) { dev_err(&dev->pdev->dev, "error initializing hardware.\n"); - goto err_init_hw; + return -EIO; } /* IRQ event handling initialization */ @@ -952,57 +928,43 @@ stu300_probe(struct platform_device *pdev) /* i2c device drivers may be active on return from add_adapter() */ ret = i2c_add_numbered_adapter(adap); if (ret) { - dev_err(&dev->pdev->dev, "failure adding ST Micro DDC " + dev_err(&pdev->dev, "failure adding ST Micro DDC " "I2C adapter\n"); - goto err_add_adapter; + return ret; } - return 0; - err_add_adapter: - err_init_hw: - free_irq(dev->irq, dev); - err_no_irq: - iounmap(dev->virtbase); - err_no_ioremap: - release_mem_region(dev->phybase, dev->physize); - err_no_ioregion: - platform_set_drvdata(pdev, NULL); - err_no_resource: - clk_put(dev->clk); - err_no_clk: - kfree(dev); - err_no_devmem: - dev_err(&pdev->dev, "failed to add " NAME " adapter: %d\n", - pdev->id); - return ret; + platform_set_drvdata(pdev, dev); + return 0; } #ifdef CONFIG_PM -static int stu300_suspend(struct platform_device *pdev, pm_message_t state) +static int stu300_suspend(struct device *device) { - struct stu300_dev *dev = platform_get_drvdata(pdev); + struct stu300_dev *dev = dev_get_drvdata(device); /* Turn off everything */ stu300_wr8(0x00, dev->virtbase + I2C_CR); return 0; } -static int stu300_resume(struct platform_device *pdev) +static int stu300_resume(struct device *device) { int ret = 0; - struct stu300_dev *dev = platform_get_drvdata(pdev); + struct stu300_dev *dev = dev_get_drvdata(device); clk_enable(dev->clk); ret = stu300_init_hw(dev); clk_disable(dev->clk); if (ret != 0) - dev_err(&pdev->dev, "error re-initializing hardware.\n"); + dev_err(device, "error re-initializing hardware.\n"); return ret; } + +static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume); +#define STU300_I2C_PM (&stu300_pm) #else -#define stu300_suspend NULL -#define stu300_resume NULL +#define STU300_I2C_PM NULL #endif static int __exit @@ -1013,12 +975,7 @@ stu300_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); /* Turn off everything */ stu300_wr8(0x00, dev->virtbase + I2C_CR); - free_irq(dev->irq, dev); - iounmap(dev->virtbase); - release_mem_region(dev->phybase, dev->physize); - clk_put(dev->clk); platform_set_drvdata(pdev, NULL); - kfree(dev); return 0; } @@ -1026,10 +983,9 @@ static struct platform_driver stu300_i2c_driver = { .driver = { .name = NAME, .owner = THIS_MODULE, + .pm = STU300_I2C_PM, }, .remove = __exit_p(stu300_remove), - .suspend = stu300_suspend, - .resume = stu300_resume, }; diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 8b2e555a9563..66eb53fac202 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -97,8 +97,21 @@ #define I2C_HEADER_10BIT_ADDR (1<<18) #define I2C_HEADER_IE_ENABLE (1<<17) #define I2C_HEADER_REPEAT_START (1<<16) +#define I2C_HEADER_CONTINUE_XFER (1<<15) #define I2C_HEADER_MASTER_ADDR_SHIFT 12 #define I2C_HEADER_SLAVE_ADDR_SHIFT 1 +/* + * msg_end_type: The bus control which need to be send at end of transfer. + * @MSG_END_STOP: Send stop pulse at end of transfer. + * @MSG_END_REPEAT_START: Send repeat start at end of transfer. + * @MSG_END_CONTINUE: The following on message is coming and so do not send + * stop or repeat start. + */ +enum msg_end_type { + MSG_END_STOP, + MSG_END_REPEAT_START, + MSG_END_CONTINUE, +}; /** * struct tegra_i2c_dev - per device i2c context @@ -106,7 +119,6 @@ * @adapter: core i2c layer adapter information * @clk: clock reference for i2c controller * @i2c_clk: clock reference for i2c bus - * @iomem: memory resource for registers * @base: ioremapped registers cookie * @cont_id: i2c controller id, used for for packet header * @irq: irq number of transfer complete interrupt @@ -124,7 +136,6 @@ struct tegra_i2c_dev { struct i2c_adapter adapter; struct clk *clk; struct clk *i2c_clk; - struct resource *iomem; void __iomem *base; int cont_id; int irq; @@ -165,6 +176,10 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg) { writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); + + /* Read back register to make sure that register writes completed */ + if (reg != I2C_TX_FIFO) + readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); } static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg) @@ -341,7 +356,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) u32 val; int err = 0; - clk_enable(i2c_dev->clk); + clk_prepare_enable(i2c_dev->clk); tegra_periph_reset_assert(i2c_dev->clk); udelay(2); @@ -372,7 +387,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (tegra_i2c_flush_fifos(i2c_dev)) err = -ETIMEDOUT; - clk_disable(i2c_dev->clk); + clk_disable_unprepare(i2c_dev->clk); if (i2c_dev->irq_disabled) { i2c_dev->irq_disabled = 0; @@ -449,7 +464,7 @@ err: } static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, - struct i2c_msg *msg, int stop) + struct i2c_msg *msg, enum msg_end_type end_state) { u32 packet_header; u32 int_mask; @@ -476,7 +491,9 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); packet_header = I2C_HEADER_IE_ENABLE; - if (!stop) + if (end_state == MSG_END_CONTINUE) + packet_header |= I2C_HEADER_CONTINUE_XFER; + else if (end_state == MSG_END_REPEAT_START) packet_header |= I2C_HEADER_REPEAT_START; if (msg->flags & I2C_M_TEN) { packet_header |= msg->addr; @@ -546,20 +563,27 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (i2c_dev->is_suspended) return -EBUSY; - clk_enable(i2c_dev->clk); + clk_prepare_enable(i2c_dev->clk); for (i = 0; i < num; i++) { - int stop = (i == (num - 1)) ? 1 : 0; - ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], stop); + enum msg_end_type end_type = MSG_END_STOP; + if (i < (num - 1)) { + if (msgs[i + 1].flags & I2C_M_NOSTART) + end_type = MSG_END_CONTINUE; + else + end_type = MSG_END_REPEAT_START; + } + ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type); if (ret) break; } - clk_disable(i2c_dev->clk); + clk_disable_unprepare(i2c_dev->clk); return ret ?: i; } static u32 tegra_i2c_func(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | + I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART; } static const struct i2c_algorithm tegra_i2c_algo = { @@ -572,7 +596,6 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) struct tegra_i2c_dev *i2c_dev; struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data; struct resource *res; - struct resource *iomem; struct clk *clk; struct clk *i2c_clk; const unsigned int *prop; @@ -585,50 +608,41 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no mem resource\n"); return -EINVAL; } - iomem = request_mem_region(res->start, resource_size(res), pdev->name); - if (!iomem) { - dev_err(&pdev->dev, "I2C region already claimed\n"); - return -EBUSY; - } - base = ioremap(iomem->start, resource_size(iomem)); + base = devm_request_and_ioremap(&pdev->dev, res); if (!base) { - dev_err(&pdev->dev, "Cannot ioremap I2C region\n"); - return -ENOMEM; + dev_err(&pdev->dev, "Cannot request/ioremap I2C registers\n"); + return -EADDRNOTAVAIL; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { dev_err(&pdev->dev, "no irq resource\n"); - ret = -EINVAL; - goto err_iounmap; + return -EINVAL; } irq = res->start; - clk = clk_get(&pdev->dev, NULL); + clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "missing controller clock"); - ret = PTR_ERR(clk); - goto err_release_region; + return PTR_ERR(clk); } - i2c_clk = clk_get(&pdev->dev, "i2c"); + i2c_clk = devm_clk_get(&pdev->dev, "i2c"); if (IS_ERR(i2c_clk)) { dev_err(&pdev->dev, "missing bus clock"); - ret = PTR_ERR(i2c_clk); - goto err_clk_put; + return PTR_ERR(i2c_clk); } - i2c_dev = kzalloc(sizeof(struct tegra_i2c_dev), GFP_KERNEL); + i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); if (!i2c_dev) { - ret = -ENOMEM; - goto err_i2c_clk_put; + dev_err(&pdev->dev, "Could not allocate struct tegra_i2c_dev"); + return -ENOMEM; } i2c_dev->base = base; i2c_dev->clk = clk; i2c_dev->i2c_clk = i2c_clk; - i2c_dev->iomem = iomem; i2c_dev->adapter.algo = &tegra_i2c_algo; i2c_dev->irq = irq; i2c_dev->cont_id = pdev->id; @@ -657,16 +671,17 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) ret = tegra_i2c_init(i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to initialize i2c controller"); - goto err_free; + return ret; } - ret = request_irq(i2c_dev->irq, tegra_i2c_isr, 0, pdev->name, i2c_dev); + ret = devm_request_irq(&pdev->dev, i2c_dev->irq, + tegra_i2c_isr, 0, pdev->name, i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); - goto err_free; + return ret; } - clk_enable(i2c_dev->i2c_clk); + clk_prepare_enable(i2c_dev->i2c_clk); i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); i2c_dev->adapter.owner = THIS_MODULE; @@ -681,45 +696,26 @@ static int __devinit tegra_i2c_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_dev->adapter); if (ret) { dev_err(&pdev->dev, "Failed to add I2C adapter\n"); - goto err_free_irq; + clk_disable_unprepare(i2c_dev->i2c_clk); + return ret; } of_i2c_register_devices(&i2c_dev->adapter); return 0; -err_free_irq: - free_irq(i2c_dev->irq, i2c_dev); -err_free: - kfree(i2c_dev); -err_i2c_clk_put: - clk_put(i2c_clk); -err_clk_put: - clk_put(clk); -err_release_region: - release_mem_region(iomem->start, resource_size(iomem)); -err_iounmap: - iounmap(base); - return ret; } static int __devexit tegra_i2c_remove(struct platform_device *pdev) { struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); i2c_del_adapter(&i2c_dev->adapter); - free_irq(i2c_dev->irq, i2c_dev); - clk_put(i2c_dev->i2c_clk); - clk_put(i2c_dev->clk); - release_mem_region(i2c_dev->iomem->start, - resource_size(i2c_dev->iomem)); - iounmap(i2c_dev->base); - kfree(i2c_dev); return 0; } #ifdef CONFIG_PM -static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state) +static int tegra_i2c_suspend(struct device *dev) { - struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); i2c_lock_adapter(&i2c_dev->adapter); i2c_dev->is_suspended = true; @@ -728,9 +724,9 @@ static int tegra_i2c_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int tegra_i2c_resume(struct platform_device *pdev) +static int tegra_i2c_resume(struct device *dev) { - struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); + struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); int ret; i2c_lock_adapter(&i2c_dev->adapter); @@ -748,6 +744,11 @@ static int tegra_i2c_resume(struct platform_device *pdev) return 0; } + +static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume); +#define TEGRA_I2C_PM (&tegra_i2c_pm) +#else +#define TEGRA_I2C_PM NULL #endif #if defined(CONFIG_OF) @@ -758,21 +759,16 @@ static const struct of_device_id tegra_i2c_of_match[] __devinitconst = { {}, }; MODULE_DEVICE_TABLE(of, tegra_i2c_of_match); -#else -#define tegra_i2c_of_match NULL #endif static struct platform_driver tegra_i2c_driver = { .probe = tegra_i2c_probe, .remove = __devexit_p(tegra_i2c_remove), -#ifdef CONFIG_PM - .suspend = tegra_i2c_suspend, - .resume = tegra_i2c_resume, -#endif .driver = { .name = "tegra-i2c", .owner = THIS_MODULE, - .of_match_table = tegra_i2c_of_match, + .of_match_table = of_match_ptr(tegra_i2c_of_match), + .pm = TEGRA_I2C_PM, }, }; diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index f07307ff360d..05106368d405 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -143,6 +143,7 @@ static const struct i2c_algorithm usb_algorithm = { static const struct usb_device_id i2c_tiny_usb_table[] = { { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */ { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */ + { USB_DEVICE(0x1964, 0x0001) }, /* Robofuzz OSIF */ { } /* Terminating entry */ }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 713d31ade26b..7ffee71ca190 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -161,20 +161,8 @@ static struct pci_driver vt586b_driver = { .remove = __devexit_p(vt586b_remove), }; -static int __init i2c_vt586b_init(void) -{ - return pci_register_driver(&vt586b_driver); -} - -static void __exit i2c_vt586b_exit(void) -{ - pci_unregister_driver(&vt586b_driver); -} - +module_pci_driver(vt586b_driver); MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>"); MODULE_DESCRIPTION("i2c for Via vt82c586b southbridge"); MODULE_LICENSE("GPL"); - -module_init(i2c_vt586b_init); -module_exit(i2c_vt586b_exit); |