diff options
Diffstat (limited to 'drivers/gpu/drm/pl111/pl111_display.c')
| -rw-r--r-- | drivers/gpu/drm/pl111/pl111_display.c | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c new file mode 100644 index 000000000000..39a5c33bce7d --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -0,0 +1,344 @@ +/* + * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. + * + * Parts of this file were based on sources as follows: + * + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + * + */ + +#include <linux/amba/clcd-regs.h> +#include <linux/clk.h> +#include <linux/version.h> +#include <linux/dma-buf.h> +#include <linux/of_graph.h> + +#include <drm/drmP.h> +#include <drm/drm_panel.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_cma_helper.h> + +#include "pl111_drm.h" + +irqreturn_t pl111_irq(int irq, void *data) +{ + struct pl111_drm_dev_private *priv = data; + u32 irq_stat; + irqreturn_t status = IRQ_NONE; + + irq_stat = readl(priv->regs + CLCD_PL111_MIS); + + if (!irq_stat) + return IRQ_NONE; + + if (irq_stat & CLCD_IRQ_NEXTBASE_UPDATE) { + drm_crtc_handle_vblank(&priv->pipe.crtc); + + status = IRQ_HANDLED; + } + + /* Clear the interrupt once done */ + writel(irq_stat, priv->regs + CLCD_PL111_ICR); + + return status; +} + +static u32 pl111_get_fb_offset(struct drm_plane_state *pstate) +{ + struct drm_framebuffer *fb = pstate->fb; + struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0); + + return (obj->paddr + + fb->offsets[0] + + fb->format->cpp[0] * pstate->src_x + + fb->pitches[0] * pstate->src_y); +} + +static int pl111_display_check(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *pstate, + struct drm_crtc_state *cstate) +{ + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *old_fb = pipe->plane.state->fb; + struct drm_framebuffer *fb = pstate->fb; + + if (mode->hdisplay % 16) + return -EINVAL; + + if (fb) { + u32 offset = pl111_get_fb_offset(pstate); + + /* FB base address must be dword aligned. */ + if (offset & 3) + return -EINVAL; + + /* There's no pitch register -- the mode's hdisplay + * controls it. + */ + if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) + return -EINVAL; + + /* We can't change the FB format in a flicker-free + * manner (and only update it during CRTC enable). + */ + if (old_fb && old_fb->format != fb->format) + cstate->mode_changed = true; + } + + return 0; +} + +static void pl111_display_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *cstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_plane *plane = &pipe->plane; + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *fb = plane->state->fb; + struct drm_connector *connector = &priv->connector.connector; + u32 cntl; + u32 ppl, hsw, hfp, hbp; + u32 lpp, vsw, vfp, vbp; + u32 cpl; + int ret; + + ret = clk_set_rate(priv->clk, mode->clock * 1000); + if (ret) { + dev_err(drm->dev, + "Failed to set pixel clock rate to %d: %d\n", + mode->clock * 1000, ret); + } + + clk_prepare_enable(priv->clk); + + ppl = (mode->hdisplay / 16) - 1; + hsw = mode->hsync_end - mode->hsync_start - 1; + hfp = mode->hsync_start - mode->hdisplay - 1; + hbp = mode->htotal - mode->hsync_end - 1; + + lpp = mode->vdisplay - 1; + vsw = mode->vsync_end - mode->vsync_start - 1; + vfp = mode->vsync_start - mode->vdisplay; + vbp = mode->vtotal - mode->vsync_end; + + cpl = mode->hdisplay - 1; + + writel((ppl << 2) | + (hsw << 8) | + (hfp << 16) | + (hbp << 24), + priv->regs + CLCD_TIM0); + writel(lpp | + (vsw << 10) | + (vfp << 16) | + (vbp << 24), + priv->regs + CLCD_TIM1); + /* XXX: We currently always use CLCDCLK with no divisor. We + * could probably reduce power consumption by using HCLK + * (apb_pclk) with a divisor when it gets us near our target + * pixel clock. + */ + writel(((mode->flags & DRM_MODE_FLAG_NHSYNC) ? TIM2_IHS : 0) | + ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? TIM2_IVS : 0) | + ((connector->display_info.bus_flags & + DRM_BUS_FLAG_DE_LOW) ? TIM2_IOE : 0) | + ((connector->display_info.bus_flags & + DRM_BUS_FLAG_PIXDATA_NEGEDGE) ? TIM2_IPC : 0) | + TIM2_BCD | + (cpl << 16), + priv->regs + CLCD_TIM2); + writel(0, priv->regs + CLCD_TIM3); + + drm_panel_prepare(priv->connector.panel); + + /* Enable and Power Up */ + cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1); + + /* Note that the the hardware's format reader takes 'r' from + * the low bit, while DRM formats list channels from high bit + * to low bit as you read left to right. + */ + switch (fb->format->format) { + case DRM_FORMAT_ABGR8888: + case DRM_FORMAT_XBGR8888: + cntl |= CNTL_LCDBPP24; + break; + case DRM_FORMAT_ARGB8888: + case DRM_FORMAT_XRGB8888: + cntl |= CNTL_LCDBPP24 | CNTL_BGR; + break; + case DRM_FORMAT_BGR565: + cntl |= CNTL_LCDBPP16_565; + break; + case DRM_FORMAT_RGB565: + cntl |= CNTL_LCDBPP16_565 | CNTL_BGR; + break; + case DRM_FORMAT_ABGR1555: + case DRM_FORMAT_XBGR1555: + cntl |= CNTL_LCDBPP16; + break; + case DRM_FORMAT_ARGB1555: + case DRM_FORMAT_XRGB1555: + cntl |= CNTL_LCDBPP16 | CNTL_BGR; + break; + case DRM_FORMAT_ABGR4444: + case DRM_FORMAT_XBGR4444: + cntl |= CNTL_LCDBPP16_444; + break; + case DRM_FORMAT_ARGB4444: + case DRM_FORMAT_XRGB4444: + cntl |= CNTL_LCDBPP16_444 | CNTL_BGR; + break; + default: + WARN_ONCE(true, "Unknown FB format 0x%08x\n", + fb->format->format); + break; + } + + writel(cntl, priv->regs + CLCD_PL111_CNTL); + + drm_panel_enable(priv->connector.panel); + + drm_crtc_vblank_on(crtc); +} + +void pl111_display_disable(struct drm_simple_display_pipe *pipe) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + + drm_crtc_vblank_off(crtc); + + drm_panel_disable(priv->connector.panel); + + /* Disable and Power Down */ + writel(0, priv->regs + CLCD_PL111_CNTL); + + drm_panel_unprepare(priv->connector.panel); + + clk_disable_unprepare(priv->clk); +} + +static void pl111_display_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_pstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + struct drm_pending_vblank_event *event = crtc->state->event; + struct drm_plane *plane = &pipe->plane; + struct drm_plane_state *pstate = plane->state; + struct drm_framebuffer *fb = pstate->fb; + + if (fb) { + u32 addr = pl111_get_fb_offset(pstate); + + writel(addr, priv->regs + CLCD_UBAS); + } + + if (event) { + crtc->state->event = NULL; + + spin_lock_irq(&crtc->dev->event_lock); + if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) + drm_crtc_arm_vblank_event(crtc, event); + else + drm_crtc_send_vblank_event(crtc, event); + spin_unlock_irq(&crtc->dev->event_lock); + } +} + +int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + + writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); + + return 0; +} + +void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + + writel(0, priv->regs + CLCD_PL111_IENB); +} + +static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state) +{ + return drm_fb_cma_prepare_fb(&pipe->plane, plane_state); +} + +const struct drm_simple_display_pipe_funcs pl111_display_funcs = { + .check = pl111_display_check, + .enable = pl111_display_enable, + .disable = pl111_display_disable, + .update = pl111_display_update, + .prepare_fb = pl111_display_prepare_fb, +}; + +int pl111_display_init(struct drm_device *drm) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + struct device *dev = drm->dev; + struct device_node *endpoint; + u32 tft_r0b0g0[3]; + int ret; + static const u32 formats[] = { + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_BGR565, + DRM_FORMAT_RGB565, + DRM_FORMAT_ABGR1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_XRGB1555, + DRM_FORMAT_ABGR4444, + DRM_FORMAT_XBGR4444, + DRM_FORMAT_ARGB4444, + DRM_FORMAT_XRGB4444, + }; + + endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); + if (!endpoint) + return -ENODEV; + + if (of_property_read_u32_array(endpoint, + "arm,pl11x,tft-r0g0b0-pads", + tft_r0b0g0, + ARRAY_SIZE(tft_r0b0g0)) != 0) { + dev_err(dev, "arm,pl11x,tft-r0g0b0-pads should be 3 ints\n"); + of_node_put(endpoint); + return -ENOENT; + } + of_node_put(endpoint); + + if (tft_r0b0g0[0] != 0 || + tft_r0b0g0[1] != 8 || + tft_r0b0g0[2] != 16) { + dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n"); + return -EINVAL; + } + + ret = drm_simple_display_pipe_init(drm, &priv->pipe, + &pl111_display_funcs, + formats, ARRAY_SIZE(formats), + &priv->connector.connector); + if (ret) + return ret; + + return 0; +} |