diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_reg.h')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 150 |
1 files changed, 129 insertions, 21 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 342f1f336168..b6a58f720f9a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -61,6 +61,12 @@ #define GC_LOW_FREQUENCY_ENABLE (1 << 7) #define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4) #define GC_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define GC_DISPLAY_CLOCK_267_MHZ_PNV (0 << 4) +#define GC_DISPLAY_CLOCK_333_MHZ_PNV (1 << 4) +#define GC_DISPLAY_CLOCK_444_MHZ_PNV (2 << 4) +#define GC_DISPLAY_CLOCK_200_MHZ_PNV (5 << 4) +#define GC_DISPLAY_CLOCK_133_MHZ_PNV (6 << 4) +#define GC_DISPLAY_CLOCK_167_MHZ_PNV (7 << 4) #define GC_DISPLAY_CLOCK_MASK (7 << 4) #define GM45_GC_RENDER_CLOCK_MASK (0xf << 0) #define GM45_GC_RENDER_CLOCK_266_MHZ (8 << 0) @@ -363,6 +369,7 @@ #define PUNIT_REG_GPU_LFM 0xd3 #define PUNIT_REG_GPU_FREQ_REQ 0xd4 #define PUNIT_REG_GPU_FREQ_STS 0xd8 +#define GENFREQSTATUS (1<<0) #define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc #define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */ @@ -680,6 +687,7 @@ #define ERR_INT_FIFO_UNDERRUN_C (1<<6) #define ERR_INT_FIFO_UNDERRUN_B (1<<3) #define ERR_INT_FIFO_UNDERRUN_A (1<<0) +#define ERR_INT_FIFO_UNDERRUN(pipe) (1<<(pipe*3)) #define FPGA_DBG 0x42300 #define FPGA_DBG_RM_NOCLAIM (1<<31) @@ -1127,7 +1135,8 @@ #define _DPLL_B (dev_priv->info->display_mmio_offset + 0x6018) #define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B) #define DPLL_VCO_ENABLE (1 << 31) -#define DPLL_DVO_HIGH_SPEED (1 << 30) +#define DPLL_SDVO_HIGH_SPEED (1 << 30) +#define DPLL_DVO_2X_MODE (1 << 30) #define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30) #define DPLL_SYNCLOCK_ENABLE (1 << 29) #define DPLL_REFA_CLK_ENABLE_VLV (1 << 29) @@ -1440,6 +1449,8 @@ #define MCH_SSKPD_WM0_MASK 0x3f #define MCH_SSKPD_WM0_VAL 0xc +#define MCH_SECP_NRG_STTS (MCHBAR_MIRROR_BASE_SNB + 0x592c) + /* Clocking configuration register */ #define CLKCFG 0x10c00 #define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ @@ -1696,15 +1707,26 @@ */ #define CCID 0x2180 #define CCID_EN (1<<0) +/* + * Notes on SNB/IVB/VLV context size: + * - Power context is saved elsewhere (LLC or stolen) + * - Ring/execlist context is saved on SNB, not on IVB + * - Extended context size already includes render context size + * - We always need to follow the extended context size. + * SNB BSpec has comments indicating that we should use the + * render context size instead if execlists are disabled, but + * based on empirical testing that's just nonsense. + * - Pipelined/VF state is saved on SNB/IVB respectively + * - GT1 size just indicates how much of render context + * doesn't need saving on GT1 + */ #define CXT_SIZE 0x21a0 #define GEN6_CXT_POWER_SIZE(cxt_reg) ((cxt_reg >> 24) & 0x3f) #define GEN6_CXT_RING_SIZE(cxt_reg) ((cxt_reg >> 18) & 0x3f) #define GEN6_CXT_RENDER_SIZE(cxt_reg) ((cxt_reg >> 12) & 0x3f) #define GEN6_CXT_EXTENDED_SIZE(cxt_reg) ((cxt_reg >> 6) & 0x3f) #define GEN6_CXT_PIPELINE_SIZE(cxt_reg) ((cxt_reg >> 0) & 0x3f) -#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_POWER_SIZE(cxt_reg) + \ - GEN6_CXT_RING_SIZE(cxt_reg) + \ - GEN6_CXT_RENDER_SIZE(cxt_reg) + \ +#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_RING_SIZE(cxt_reg) + \ GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \ GEN6_CXT_PIPELINE_SIZE(cxt_reg)) #define GEN7_CXT_SIZE 0x21a8 @@ -1714,11 +1736,7 @@ #define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f) #define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7) #define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f) -#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_POWER_SIZE(ctx_reg) + \ - GEN7_CXT_RING_SIZE(ctx_reg) + \ - GEN7_CXT_RENDER_SIZE(ctx_reg) + \ - GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ - GEN7_CXT_GT1_SIZE(ctx_reg) + \ +#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ GEN7_CXT_VFSTATE_SIZE(ctx_reg)) /* Haswell does have the CXT_SIZE register however it does not appear to be * valid. Now, docs explain in dwords what is in the context object. The full @@ -1778,6 +1796,71 @@ #define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B) #define VSYNCSHIFT(trans) _TRANSCODER(trans, _VSYNCSHIFT_A, _VSYNCSHIFT_B) +/* HSW eDP PSR registers */ +#define EDP_PSR_CTL 0x64800 +#define EDP_PSR_ENABLE (1<<31) +#define EDP_PSR_LINK_DISABLE (0<<27) +#define EDP_PSR_LINK_STANDBY (1<<27) +#define EDP_PSR_MIN_LINK_ENTRY_TIME_MASK (3<<25) +#define EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES (0<<25) +#define EDP_PSR_MIN_LINK_ENTRY_TIME_4_LINES (1<<25) +#define EDP_PSR_MIN_LINK_ENTRY_TIME_2_LINES (2<<25) +#define EDP_PSR_MIN_LINK_ENTRY_TIME_0_LINES (3<<25) +#define EDP_PSR_MAX_SLEEP_TIME_SHIFT 20 +#define EDP_PSR_SKIP_AUX_EXIT (1<<12) +#define EDP_PSR_TP1_TP2_SEL (0<<11) +#define EDP_PSR_TP1_TP3_SEL (1<<11) +#define EDP_PSR_TP2_TP3_TIME_500us (0<<8) +#define EDP_PSR_TP2_TP3_TIME_100us (1<<8) +#define EDP_PSR_TP2_TP3_TIME_2500us (2<<8) +#define EDP_PSR_TP2_TP3_TIME_0us (3<<8) +#define EDP_PSR_TP1_TIME_500us (0<<4) +#define EDP_PSR_TP1_TIME_100us (1<<4) +#define EDP_PSR_TP1_TIME_2500us (2<<4) +#define EDP_PSR_TP1_TIME_0us (3<<4) +#define EDP_PSR_IDLE_FRAME_SHIFT 0 + +#define EDP_PSR_AUX_CTL 0x64810 +#define EDP_PSR_AUX_DATA1 0x64814 +#define EDP_PSR_DPCD_COMMAND 0x80060000 +#define EDP_PSR_AUX_DATA2 0x64818 +#define EDP_PSR_DPCD_NORMAL_OPERATION (1<<24) +#define EDP_PSR_AUX_DATA3 0x6481c +#define EDP_PSR_AUX_DATA4 0x64820 +#define EDP_PSR_AUX_DATA5 0x64824 + +#define EDP_PSR_STATUS_CTL 0x64840 +#define EDP_PSR_STATUS_STATE_MASK (7<<29) +#define EDP_PSR_STATUS_STATE_IDLE (0<<29) +#define EDP_PSR_STATUS_STATE_SRDONACK (1<<29) +#define EDP_PSR_STATUS_STATE_SRDENT (2<<29) +#define EDP_PSR_STATUS_STATE_BUFOFF (3<<29) +#define EDP_PSR_STATUS_STATE_BUFON (4<<29) +#define EDP_PSR_STATUS_STATE_AUXACK (5<<29) +#define EDP_PSR_STATUS_STATE_SRDOFFACK (6<<29) +#define EDP_PSR_STATUS_LINK_MASK (3<<26) +#define EDP_PSR_STATUS_LINK_FULL_OFF (0<<26) +#define EDP_PSR_STATUS_LINK_FULL_ON (1<<26) +#define EDP_PSR_STATUS_LINK_STANDBY (2<<26) +#define EDP_PSR_STATUS_MAX_SLEEP_TIMER_SHIFT 20 +#define EDP_PSR_STATUS_MAX_SLEEP_TIMER_MASK 0x1f +#define EDP_PSR_STATUS_COUNT_SHIFT 16 +#define EDP_PSR_STATUS_COUNT_MASK 0xf +#define EDP_PSR_STATUS_AUX_ERROR (1<<15) +#define EDP_PSR_STATUS_AUX_SENDING (1<<12) +#define EDP_PSR_STATUS_SENDING_IDLE (1<<9) +#define EDP_PSR_STATUS_SENDING_TP2_TP3 (1<<8) +#define EDP_PSR_STATUS_SENDING_TP1 (1<<4) +#define EDP_PSR_STATUS_IDLE_MASK 0xf + +#define EDP_PSR_PERF_CNT 0x64844 +#define EDP_PSR_PERF_CNT_MASK 0xffffff + +#define EDP_PSR_DEBUG_CTL 0x64860 +#define EDP_PSR_DEBUG_MASK_LPSP (1<<27) +#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26) +#define EDP_PSR_DEBUG_MASK_HPD (1<<25) + /* VGA port control */ #define ADPA 0x61100 #define PCH_ADPA 0xe1100 @@ -2053,6 +2136,7 @@ * (Haswell and newer) to see which VIDEO_DIP_DATA byte corresponds to each byte * of the infoframe structure specified by CEA-861. */ #define VIDEO_DIP_DATA_SIZE 32 +#define VIDEO_DIP_VSC_DATA_SIZE 36 #define VIDEO_DIP_CTL 0x61170 /* Pre HSW: */ #define VIDEO_DIP_ENABLE (1 << 31) @@ -2200,6 +2284,8 @@ #define BLC_PWM_CPU_CTL2 0x48250 #define BLC_PWM_CPU_CTL 0x48254 +#define HSW_BLC_PWM2_CTL 0x48350 + /* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ #define BLC_PWM_PCH_CTL1 0xc8250 @@ -2208,6 +2294,12 @@ #define BLM_PCH_POLARITY (1 << 29) #define BLC_PWM_PCH_CTL2 0xc8254 +#define UTIL_PIN_CTL 0x48400 +#define UTIL_PIN_ENABLE (1 << 31) + +#define PCH_GTC_CTL 0xe7000 +#define PCH_GTC_ENABLE (1 << 31) + /* TV port control */ #define TV_CTL 0x68000 /** Enables the TV encoder */ @@ -3121,9 +3213,6 @@ #define MLTR_WM2_SHIFT 8 /* the unit of memory self-refresh latency time is 0.5us */ #define ILK_SRLT_MASK 0x3f -#define ILK_LATENCY(shift) (I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK) -#define ILK_READ_WM1_LATENCY() ILK_LATENCY(MLTR_WM1_SHIFT) -#define ILK_READ_WM2_LATENCY() ILK_LATENCY(MLTR_WM2_SHIFT) /* define the fifo size on Ironlake */ #define ILK_DISPLAY_FIFO 128 @@ -3170,12 +3259,6 @@ #define SSKPD_WM2_SHIFT 16 #define SSKPD_WM3_SHIFT 24 -#define SNB_LATENCY(shift) (I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK) -#define SNB_READ_WM0_LATENCY() SNB_LATENCY(SSKPD_WM0_SHIFT) -#define SNB_READ_WM1_LATENCY() SNB_LATENCY(SSKPD_WM1_SHIFT) -#define SNB_READ_WM2_LATENCY() SNB_LATENCY(SSKPD_WM2_SHIFT) -#define SNB_READ_WM3_LATENCY() SNB_LATENCY(SSKPD_WM3_SHIFT) - /* * The two pipe frame counter registers are not synchronized, so * reading a stable value is somewhat tricky. The following code @@ -3726,6 +3809,9 @@ #define DE_PLANEA_FLIP_DONE_IVB (1<<3) #define DE_PIPEA_VBLANK_IVB (1<<0) +#define DE_PIPE_VBLANK_ILK(pipe) (1 << ((pipe * 8) + 7)) +#define DE_PIPE_VBLANK_IVB(pipe) (1 << (pipe * 5)) + #define VLV_MASTER_IER 0x4400c /* Gunit master IER */ #define MASTER_INTERRUPT_ENABLE (1<<31) @@ -3888,6 +3974,7 @@ #define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6) #define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3) #define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0) +#define SERR_INT_TRANS_FIFO_UNDERRUN(pipe) (1<<(pipe*3)) /* digital port hotplug */ #define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */ @@ -4081,6 +4168,8 @@ _TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B) #define HSW_TVIDEO_DIP_AVI_DATA(trans) \ _TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B) +#define HSW_TVIDEO_DIP_VS_DATA(trans) \ + _TRANSCODER(trans, HSW_VIDEO_DIP_VS_DATA_A, HSW_VIDEO_DIP_VS_DATA_B) #define HSW_TVIDEO_DIP_SPD_DATA(trans) \ _TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B) #define HSW_TVIDEO_DIP_GCP(trans) \ @@ -4088,6 +4177,13 @@ #define HSW_TVIDEO_DIP_VSC_DATA(trans) \ _TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B) +#define HSW_STEREO_3D_CTL_A 0x70020 +#define S3D_ENABLE (1<<31) +#define HSW_STEREO_3D_CTL_B 0x71020 + +#define HSW_STEREO_3D_CTL(trans) \ + _TRANSCODER(trans, HSW_STEREO_3D_CTL_A, HSW_STEREO_3D_CTL_A) + #define _PCH_TRANS_HTOTAL_B 0xe1000 #define _PCH_TRANS_HBLANK_B 0xe1004 #define _PCH_TRANS_HSYNC_B 0xe1008 @@ -4476,6 +4572,10 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define HSW_IDICR 0x9008 +#define IDIHASHMSK(x) (((x) & 0x3f) << 16) +#define HSW_EDRAM_PRESENT 0x120010 + #define GEN6_UCGCTL1 0x9400 # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) # define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) @@ -4744,8 +4844,8 @@ #define HSW_PWR_WELL_DRIVER 0x45404 /* CTL2 */ #define HSW_PWR_WELL_KVMR 0x45408 /* CTL3 */ #define HSW_PWR_WELL_DEBUG 0x4540C /* CTL4 */ -#define HSW_PWR_WELL_ENABLE (1<<31) -#define HSW_PWR_WELL_STATE (1<<30) +#define HSW_PWR_WELL_ENABLE_REQUEST (1<<31) +#define HSW_PWR_WELL_STATE_ENABLED (1<<30) #define HSW_PWR_WELL_CTL5 0x45410 #define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31) #define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20) @@ -4866,7 +4966,8 @@ #define SBI_SSCAUXDIV6 0x0610 #define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4) #define SBI_DBUFF0 0x2a00 -#define SBI_DBUFF0_ENABLE (1<<0) +#define SBI_GEN0 0x1f00 +#define SBI_GEN0_CFG_BUFFENABLE_DISABLE (1<<0) /* LPT PIXCLK_GATE */ #define PIXCLK_GATE 0xC6020 @@ -4932,7 +5033,14 @@ #define LCPLL_CLK_FREQ_450 (0<<26) #define LCPLL_CD_CLOCK_DISABLE (1<<25) #define LCPLL_CD2X_CLOCK_DISABLE (1<<23) +#define LCPLL_POWER_DOWN_ALLOW (1<<22) #define LCPLL_CD_SOURCE_FCLK (1<<21) +#define LCPLL_CD_SOURCE_FCLK_DONE (1<<19) + +#define D_COMP (MCHBAR_MIRROR_BASE_SNB + 0x5F0C) +#define D_COMP_RCOMP_IN_PROGRESS (1<<9) +#define D_COMP_COMP_FORCE (1<<8) +#define D_COMP_COMP_DISABLE (1<<0) /* Pipe WM_LINETIME - watermark line time */ #define PIPE_WM_LINETIME_A 0x45270 |