diff options
Diffstat (limited to 'drivers/base')
| -rw-r--r-- | drivers/base/power/main.c | 2 | ||||
| -rw-r--r-- | drivers/base/power/power.h | 19 | ||||
| -rw-r--r-- | drivers/base/power/qos.c | 6 | ||||
| -rw-r--r-- | drivers/base/power/runtime.c | 62 | ||||
| -rw-r--r-- | drivers/base/power/sysfs.c | 6 | ||||
| -rw-r--r-- | drivers/base/power/wakeirq.c | 76 |
6 files changed, 144 insertions, 27 deletions
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 2932a5bd892f..eb474c882ebe 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1460,10 +1460,10 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) dpm_watchdog_clear(&wd); Complete: - complete_all(&dev->power.completion); if (error) async_error = error; + complete_all(&dev->power.completion); TRACE_SUSPEND(error); return error; } diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 50e30e7b059d..a84332aefc2d 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -21,14 +21,22 @@ extern void pm_runtime_init(struct device *dev); extern void pm_runtime_reinit(struct device *dev); extern void pm_runtime_remove(struct device *dev); +#define WAKE_IRQ_DEDICATED_ALLOCATED BIT(0) +#define WAKE_IRQ_DEDICATED_MANAGED BIT(1) +#define WAKE_IRQ_DEDICATED_MASK (WAKE_IRQ_DEDICATED_ALLOCATED | \ + WAKE_IRQ_DEDICATED_MANAGED) + struct wake_irq { struct device *dev; + unsigned int status; int irq; - bool dedicated_irq:1; }; extern void dev_pm_arm_wake_irq(struct wake_irq *wirq); extern void dev_pm_disarm_wake_irq(struct wake_irq *wirq); +extern void dev_pm_enable_wake_irq_check(struct device *dev, + bool can_change_status); +extern void dev_pm_disable_wake_irq_check(struct device *dev); #ifdef CONFIG_PM_SLEEP @@ -104,6 +112,15 @@ static inline void dev_pm_disarm_wake_irq(struct wake_irq *wirq) { } +static inline void dev_pm_enable_wake_irq_check(struct device *dev, + bool can_change_status) +{ +} + +static inline void dev_pm_disable_wake_irq_check(struct device *dev) +{ +} + #endif #ifdef CONFIG_PM_SLEEP diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 7f3646e459cb..58fcc758334e 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -856,7 +856,10 @@ int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val) struct dev_pm_qos_request *req; if (val < 0) { - ret = -EINVAL; + if (val == PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT) + ret = 0; + else + ret = -EINVAL; goto out; } req = kzalloc(sizeof(*req), GFP_KERNEL); @@ -883,6 +886,7 @@ int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val) mutex_unlock(&dev_pm_qos_mtx); return ret; } +EXPORT_SYMBOL_GPL(dev_pm_qos_update_user_latency_tolerance); /** * dev_pm_qos_expose_latency_tolerance - Expose latency tolerance to userspace diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 82a081ea4317..26856d050037 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -241,7 +241,8 @@ static int rpm_check_suspend_allowed(struct device *dev) retval = -EACCES; else if (atomic_read(&dev->power.usage_count) > 0) retval = -EAGAIN; - else if (!pm_children_suspended(dev)) + else if (!dev->power.ignore_children && + atomic_read(&dev->power.child_count)) retval = -EBUSY; /* Pending resume requests take precedence over suspends. */ @@ -515,7 +516,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) callback = RPM_GET_CALLBACK(dev, runtime_suspend); - dev_pm_enable_wake_irq(dev); + dev_pm_enable_wake_irq_check(dev, true); retval = rpm_callback(callback, dev); if (retval) goto fail; @@ -554,7 +555,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) return retval; fail: - dev_pm_disable_wake_irq(dev); + dev_pm_disable_wake_irq_check(dev); __update_runtime_status(dev, RPM_ACTIVE); dev->power.deferred_resume = false; wake_up_all(&dev->power.wait_queue); @@ -712,8 +713,8 @@ static int rpm_resume(struct device *dev, int rpmflags) spin_lock(&parent->power.lock); /* - * We can resume if the parent's runtime PM is disabled or it - * is set to ignore children. + * Resume the parent if it has runtime PM enabled and not been + * set to ignore its children. */ if (!parent->power.disable_depth && !parent->power.ignore_children) { @@ -737,12 +738,12 @@ static int rpm_resume(struct device *dev, int rpmflags) callback = RPM_GET_CALLBACK(dev, runtime_resume); - dev_pm_disable_wake_irq(dev); + dev_pm_disable_wake_irq_check(dev); retval = rpm_callback(callback, dev); if (retval) { __update_runtime_status(dev, RPM_SUSPENDED); pm_runtime_cancel_pending(dev); - dev_pm_enable_wake_irq(dev); + dev_pm_enable_wake_irq_check(dev, false); } else { no_callback: __update_runtime_status(dev, RPM_ACTIVE); @@ -1027,7 +1028,17 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status) goto out_set; if (status == RPM_SUSPENDED) { - /* It always is possible to set the status to 'suspended'. */ + /* + * It is invalid to suspend a device with an active child, + * unless it has been set to ignore its children. + */ + if (!dev->power.ignore_children && + atomic_read(&dev->power.child_count)) { + dev_err(dev, "runtime PM trying to suspend device but active child\n"); + error = -EBUSY; + goto out; + } + if (parent) { atomic_add_unless(&parent->power.child_count, -1, 0); notify_parent = !parent->power.ignore_children; @@ -1478,6 +1489,16 @@ int pm_runtime_force_suspend(struct device *dev) if (ret) goto err; + /* + * Increase the runtime PM usage count for the device's parent, in case + * when we find the device being used when system suspend was invoked. + * This informs pm_runtime_force_resume() to resume the parent + * immediately, which is needed to be able to resume its children, + * when not deferring the resume to be managed via runtime PM. + */ + if (dev->parent && atomic_read(&dev->power.usage_count) > 1) + pm_runtime_get_noresume(dev->parent); + pm_runtime_set_suspended(dev); return 0; err: @@ -1487,16 +1508,20 @@ err: EXPORT_SYMBOL_GPL(pm_runtime_force_suspend); /** - * pm_runtime_force_resume - Force a device into resume state. + * pm_runtime_force_resume - Force a device into resume state if needed. * @dev: Device to resume. * * Prior invoking this function we expect the user to have brought the device * into low power state by a call to pm_runtime_force_suspend(). Here we reverse - * those actions and brings the device into full power. We update the runtime PM - * status and re-enables runtime PM. + * those actions and brings the device into full power, if it is expected to be + * used on system resume. To distinguish that, we check whether the runtime PM + * usage count is greater than 1 (the PM core increases the usage count in the + * system PM prepare phase), as that indicates a real user (such as a subsystem, + * driver, userspace, etc.) is using it. If that is the case, the device is + * expected to be used on system resume as well, so then we resume it. In the + * other case, we defer the resume to be managed via runtime PM. * - * Typically this function may be invoked from a system resume callback to make - * sure the device is put into full power state. + * Typically this function may be invoked from a system resume callback. */ int pm_runtime_force_resume(struct device *dev) { @@ -1513,6 +1538,17 @@ int pm_runtime_force_resume(struct device *dev) if (!pm_runtime_status_suspended(dev)) goto out; + /* + * Decrease the parent's runtime PM usage count, if we increased it + * during system suspend in pm_runtime_force_suspend(). + */ + if (atomic_read(&dev->power.usage_count) > 1) { + if (dev->parent) + pm_runtime_put_noidle(dev->parent); + } else { + goto out; + } + ret = pm_runtime_set_active(dev); if (ret) goto out; diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index a7b46798c81d..33b4b902741a 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -263,7 +263,11 @@ static ssize_t pm_qos_latency_tolerance_store(struct device *dev, s32 value; int ret; - if (kstrtos32(buf, 0, &value)) { + if (kstrtos32(buf, 0, &value) == 0) { + /* Users can't write negative values directly */ + if (value < 0) + return -EINVAL; + } else { if (!strcmp(buf, "auto") || !strcmp(buf, "auto\n")) value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT; else if (!strcmp(buf, "any") || !strcmp(buf, "any\n")) diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c index 0d77cd6fd8d1..404d94c6c8bc 100644 --- a/drivers/base/power/wakeirq.c +++ b/drivers/base/power/wakeirq.c @@ -110,8 +110,10 @@ void dev_pm_clear_wake_irq(struct device *dev) dev->power.wakeirq = NULL; spin_unlock_irqrestore(&dev->power.lock, flags); - if (wirq->dedicated_irq) + if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED) { free_irq(wirq->irq, wirq); + wirq->status &= ~WAKE_IRQ_DEDICATED_MASK; + } kfree(wirq); } EXPORT_SYMBOL_GPL(dev_pm_clear_wake_irq); @@ -179,7 +181,6 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) wirq->dev = dev; wirq->irq = irq; - wirq->dedicated_irq = true; irq_set_status_flags(irq, IRQ_NOAUTOEN); /* @@ -195,6 +196,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) if (err) goto err_free_irq; + wirq->status = WAKE_IRQ_DEDICATED_ALLOCATED; + return err; err_free_irq: @@ -210,9 +213,9 @@ EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq); * dev_pm_enable_wake_irq - Enable device wake-up interrupt * @dev: Device * - * Called from the bus code or the device driver for - * runtime_suspend() to enable the wake-up interrupt while - * the device is running. + * Optionally called from the bus code or the device driver for + * runtime_resume() to override the PM runtime core managed wake-up + * interrupt handling to enable the wake-up interrupt. * * Note that for runtime_suspend()) the wake-up interrupts * should be unconditionally enabled unlike for suspend() @@ -222,7 +225,7 @@ void dev_pm_enable_wake_irq(struct device *dev) { struct wake_irq *wirq = dev->power.wakeirq; - if (wirq && wirq->dedicated_irq) + if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED)) enable_irq(wirq->irq); } EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq); @@ -231,20 +234,73 @@ EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq); * dev_pm_disable_wake_irq - Disable device wake-up interrupt * @dev: Device * - * Called from the bus code or the device driver for - * runtime_resume() to disable the wake-up interrupt while - * the device is running. + * Optionally called from the bus code or the device driver for + * runtime_suspend() to override the PM runtime core managed wake-up + * interrupt handling to disable the wake-up interrupt. */ void dev_pm_disable_wake_irq(struct device *dev) { struct wake_irq *wirq = dev->power.wakeirq; - if (wirq && wirq->dedicated_irq) + if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED)) disable_irq_nosync(wirq->irq); } EXPORT_SYMBOL_GPL(dev_pm_disable_wake_irq); /** + * dev_pm_enable_wake_irq_check - Checks and enables wake-up interrupt + * @dev: Device + * @can_change_status: Can change wake-up interrupt status + * + * Enables wakeirq conditionally. We need to enable wake-up interrupt + * lazily on the first rpm_suspend(). This is needed as the consumer device + * starts in RPM_SUSPENDED state, and the the first pm_runtime_get() would + * otherwise try to disable already disabled wakeirq. The wake-up interrupt + * starts disabled with IRQ_NOAUTOEN set. + * + * Should be only called from rpm_suspend() and rpm_resume() path. + * Caller must hold &dev->power.lock to change wirq->status + */ +void dev_pm_enable_wake_irq_check(struct device *dev, + bool can_change_status) +{ + struct wake_irq *wirq = dev->power.wakeirq; + + if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK))) + return; + + if (likely(wirq->status & WAKE_IRQ_DEDICATED_MANAGED)) { + goto enable; + } else if (can_change_status) { + wirq->status |= WAKE_IRQ_DEDICATED_MANAGED; + goto enable; + } + + return; + +enable: + enable_irq(wirq->irq); +} + +/** + * dev_pm_disable_wake_irq_check - Checks and disables wake-up interrupt + * @dev: Device + * + * Disables wake-up interrupt conditionally based on status. + * Should be only called from rpm_suspend() and rpm_resume() path. + */ +void dev_pm_disable_wake_irq_check(struct device *dev) +{ + struct wake_irq *wirq = dev->power.wakeirq; + + if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK))) + return; + + if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED) + disable_irq_nosync(wirq->irq); +} + +/** * dev_pm_arm_wake_irq - Arm device wake-up * @wirq: Device wake-up interrupt * |