summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-s3c2400/gpio.c4
-rw-r--r--arch/arm/mach-s3c2410/gpio.c4
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c24
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-core.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-fns.h8
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-nrs.h21
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h122
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c6
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c50
-rw-r--r--arch/arm/mach-s3c2410/mach-qt2410.c18
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c10
-rw-r--r--arch/arm/mach-s3c2410/pm.c4
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c10
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c42
-rw-r--r--arch/arm/mach-s3c2412/mach-smdk2413.c8
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-at2440evb.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c16
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c8
-rw-r--r--arch/arm/plat-s3c24xx/common-smdk.c24
-rw-r--r--arch/arm/plat-s3c24xx/gpio.c14
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c14
-rw-r--r--arch/arm/plat-s3c24xx/pm.c8
-rw-r--r--arch/arm/plat-s3c24xx/setup-i2c.c4
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c20
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c20
28 files changed, 185 insertions, 286 deletions
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed4174c8c..81ebe2f09901 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
int s3c2400_gpio_getirq(unsigned int pin)
{
- if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
+ if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE7_EINT7)
return -1; /* not valid interrupts */
- return (pin - S3C2410_GPE0) + IRQ_EINT0;
+ return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
}
EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132f39e7..bf7fbfe7e4d8 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned long flags;
unsigned long val;
- if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+ if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
return -1;
config &= 0xff;
- pin -= S3C2410_GPG8;
+ pin -= S3C2410_GPG(8);
reg += pin & ~3;
local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 9bbea8a73ddc..5aabf117cbb0 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -43,9 +43,9 @@ static void h1940bt_enable(int on)
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
state = 1;
}
@@ -54,9 +54,9 @@ static void h1940bt_enable(int on)
led_trigger_event(bt_led_trigger, 0);
#endif
- s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
@@ -89,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
static int __init h1940bt_probe(struct platform_device *pdev)
{
/* Configures BT serial port GPIOs */
- s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
- s3c2410_gpio_pullup(S3C2410_GPH0, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_pullup(S3C2410_GPH1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
- s3c2410_gpio_pullup(S3C2410_GPH2, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
- s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+ s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
#ifdef CONFIG_LEDS_H1940
led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb99ef14..8fe192081d3a 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
{
struct s3c_gpio_chip *chip;
- if (pin > S3C2410_GPG10)
+ if (pin > S3C2410_GPG(10))
return NULL;
chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index b4f39558beda..801dff13858d 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -30,8 +30,8 @@
* set the configuration of the given pin to the value passed.
*
* eg:
- * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+ * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
*/
extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
@@ -80,8 +80,8 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
*
* eg;
*
- * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+ * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 5213e453df1c..2edbb9c88ab3 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -68,5 +68,26 @@ enum s3c_gpio_number {
#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0 S3C2410_GPA(0)
+#define S3C2410_GPA1 S3C2410_GPA(1)
+#define S3C2410_GPA3 S3C2410_GPA(3)
+#define S3C2410_GPA7 S3C2410_GPA(7)
+
+#define S3C2410_GPE0 S3C2410_GPE(0)
+#define S3C2410_GPE1 S3C2410_GPE(1)
+#define S3C2410_GPE2 S3C2410_GPE(2)
+#define S3C2410_GPE3 S3C2410_GPE(3)
+#define S3C2410_GPE4 S3C2410_GPE(4)
+#define S3C2410_GPE5 S3C2410_GPE(5)
+#define S3C2410_GPE6 S3C2410_GPE(6)
+#define S3C2410_GPE7 S3C2410_GPE(7)
+#define S3C2410_GPE8 S3C2410_GPE(8)
+#define S3C2410_GPE9 S3C2410_GPE(9)
+#define S3C2410_GPE10 S3C2410_GPE(10)
+
+#define S3C2410_GPH10 S3C2410_GPH(10)
+
#endif /* __MACH_GPIONRS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 90cefebd2937..b278d0c45ccf 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,81 +69,58 @@
#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
-#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
#define S3C2410_GPA0_ADDR0 (1<<0)
-#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
#define S3C2410_GPA1_ADDR16 (1<<1)
-#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
#define S3C2410_GPA2_ADDR17 (1<<2)
-#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
#define S3C2410_GPA3_ADDR18 (1<<3)
-#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
#define S3C2410_GPA4_ADDR19 (1<<4)
-#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
#define S3C2410_GPA5_ADDR20 (1<<5)
-#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
#define S3C2410_GPA6_ADDR21 (1<<6)
-#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
#define S3C2410_GPA7_ADDR22 (1<<7)
-#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
#define S3C2410_GPA8_ADDR23 (1<<8)
-#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
#define S3C2410_GPA9_ADDR24 (1<<9)
-#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
#define S3C2410_GPA10_ADDR25 (1<<10)
#define S3C2400_GPA10_SCKE (1<<10)
-#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
#define S3C2410_GPA11_ADDR26 (1<<11)
#define S3C2400_GPA11_nCAS0 (1<<11)
-#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
#define S3C2410_GPA12_nGCS1 (1<<12)
#define S3C2400_GPA12_nCAS1 (1<<12)
-#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
#define S3C2410_GPA13_nGCS2 (1<<13)
#define S3C2400_GPA13_nGCS1 (1<<13)
-#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
#define S3C2410_GPA14_nGCS3 (1<<14)
#define S3C2400_GPA14_nGCS2 (1<<14)
-#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
#define S3C2410_GPA15_nGCS4 (1<<15)
#define S3C2400_GPA15_nGCS3 (1<<15)
-#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
#define S3C2410_GPA16_nGCS5 (1<<16)
#define S3C2400_GPA16_nGCS4 (1<<16)
-#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
#define S3C2410_GPA17_CLE (1<<17)
#define S3C2400_GPA17_nGCS5 (1<<17)
-#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
#define S3C2410_GPA18_ALE (1<<18)
-#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
#define S3C2410_GPA19_nFWE (1<<19)
-#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
#define S3C2410_GPA20_nFRE (1<<20)
-#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
@@ -171,85 +148,69 @@
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
#define S3C2400_GPB0_DATA16 (0x02 << 0)
-#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
#define S3C2400_GPB1_DATA17 (0x02 << 2)
-#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
#define S3C2400_GPB2_DATA18 (0x02 << 4)
#define S3C2400_GPB2_TCLK1 (0x03 << 4)
-#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
#define S3C2400_GPB3_DATA19 (0x02 << 6)
#define S3C2400_GPB3_TXD1 (0x03 << 6)
-#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
#define S3C2400_GPB4_RXD1 (0x03 << 8)
#define S3C2400_GPB4_MASK (0x03 << 8)
-#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
-#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
-#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
-#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
#define S3C2400_GPB8_DATA24 (0x02 << 16)
-#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
-#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
-#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
#define S3C2400_GPB11_INP (0x00 << 22)
#define S3C2400_GPB11_OUTP (0x01 << 22)
#define S3C2400_GPB11_DATA27 (0x02 << 22)
-#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
#define S3C2400_GPB12_INP (0x00 << 24)
#define S3C2400_GPB12_OUTP (0x01 << 24)
#define S3C2400_GPB12_DATA28 (0x02 << 24)
-#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
#define S3C2400_GPB13_INP (0x00 << 26)
#define S3C2400_GPB13_OUTP (0x01 << 26)
#define S3C2400_GPB13_DATA29 (0x02 << 26)
-#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
#define S3C2400_GPB14_INP (0x00 << 28)
#define S3C2400_GPB14_OUTP (0x01 << 28)
#define S3C2400_GPB14_DATA30 (0x02 << 28)
-#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
#define S3C2400_GPB15_INP (0x00 << 30)
#define S3C2400_GPB15_OUTP (0x01 << 30)
#define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -270,67 +231,51 @@
#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
-#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
#define S3C2400_GPC0_VD0 (0x02 << 0)
-#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
#define S3C2410_GPC1_VCLK (0x02 << 2)
#define S3C2400_GPC1_VD1 (0x02 << 2)
-#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
#define S3C2410_GPC2_VLINE (0x02 << 4)
#define S3C2400_GPC2_VD2 (0x02 << 4)
-#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
#define S3C2400_GPC3_VD3 (0x02 << 6)
-#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
#define S3C2410_GPC4_VM (0x02 << 8)
#define S3C2400_GPC4_VD4 (0x02 << 8)
-#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
#define S3C2400_GPC5_VD5 (0x02 << 10)
-#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
#define S3C2400_GPC6_VD6 (0x02 << 12)
-#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
#define S3C2400_GPC7_VD7 (0x02 << 14)
-#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
#define S3C2410_GPC8_VD0 (0x02 << 16)
#define S3C2400_GPC8_VD8 (0x02 << 16)
-#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
#define S3C2410_GPC9_VD1 (0x02 << 18)
#define S3C2400_GPC9_VD9 (0x02 << 18)
-#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
#define S3C2410_GPC10_VD2 (0x02 << 20)
#define S3C2400_GPC10_VD10 (0x02 << 20)
-#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
#define S3C2410_GPC11_VD3 (0x02 << 22)
#define S3C2400_GPC11_VD11 (0x02 << 22)
-#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
#define S3C2410_GPC12_VD4 (0x02 << 24)
#define S3C2400_GPC12_VD12 (0x02 << 24)
-#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
#define S3C2410_GPC13_VD5 (0x02 << 26)
#define S3C2400_GPC13_VD13 (0x02 << 26)
-#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
#define S3C2410_GPC14_VD6 (0x02 << 28)
#define S3C2400_GPC14_VD14 (0x02 << 28)
-#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
#define S3C2410_GPC15_VD7 (0x02 << 30)
#define S3C2400_GPC15_VD15 (0x02 << 30)
@@ -355,67 +300,51 @@
#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
-#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
-#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
#define S3C2410_GPD1_VD9 (0x02 << 2)
#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
-#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
#define S3C2410_GPD2_VD10 (0x02 << 4)
#define S3C2400_GPD2_VLINE (0x02 << 4)
-#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
#define S3C2410_GPD3_VD11 (0x02 << 6)
#define S3C2400_GPD3_VCLK (0x02 << 6)
-#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
#define S3C2410_GPD4_VD12 (0x02 << 8)
#define S3C2400_GPD4_LEND (0x02 << 8)
-#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
#define S3C2410_GPD5_VD13 (0x02 << 10)
#define S3C2400_GPD5_TOUT0 (0x02 << 10)
-#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
#define S3C2410_GPD6_VD14 (0x02 << 12)
#define S3C2400_GPD6_TOUT1 (0x02 << 12)
-#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
#define S3C2410_GPD7_VD15 (0x02 << 14)
#define S3C2400_GPD7_TOUT2 (0x02 << 14)
-#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
-#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2410_GPD9_MASK (0x03 << 18)
-#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
-#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
#define S3C2410_GPD11_VD19 (0x02 << 22)
-#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
#define S3C2410_GPD12_VD20 (0x02 << 24)
-#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
#define S3C2410_GPD13_VD21 (0x02 << 26)
-#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
#define S3C2410_GPD14_VD22 (0x02 << 28)
#define S3C2410_GPD14_nSS1 (0x03 << 28)
-#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
#define S3C2410_GPD15_VD23 (0x02 << 30)
#define S3C2410_GPD15_nSS0 (0x03 << 30)
@@ -441,26 +370,22 @@
#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
-#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
-#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
-#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
-#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
@@ -468,7 +393,6 @@
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
-#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
@@ -476,59 +400,48 @@
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
-#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
-#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
-#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
-#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
-#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
-#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
-#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
#define S3C2400_GPE11_nXBREQ (0x03 << 22)
-#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
-#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
#define S3C2410_GPE14_IICSCL (0x02 << 28)
#define S3C2410_GPE14_MASK (0x03 << 28)
-#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
#define S3C2410_GPE15_IICSDA (0x02 << 30)
#define S3C2410_GPE15_MASK (0x03 << 30)
@@ -564,39 +477,31 @@
#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
-#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
#define S3C2400_GPF0_RXD0 (0x02 << 0)
-#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
#define S3C2400_GPF1_RXD1 (0x02 << 2)
#define S3C2400_GPF1_IICSDA (0x03 << 2)
-#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
#define S3C2400_GPF2_TXD0 (0x02 << 4)
-#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
#define S3C2400_GPF3_TXD1 (0x02 << 6)
#define S3C2400_GPF3_IICSCL (0x03 << 6)
-#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
#define S3C2400_GPF4_nRTS0 (0x02 << 8)
#define S3C2400_GPF4_nXBACK (0x03 << 8)
-#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
#define S3C2400_GPF5_nCTS0 (0x02 << 10)
#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
@@ -621,85 +526,69 @@
#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
-#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
-#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
-#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
#define S3C2400_GPG2_CDCLK (0x02 << 4)
-#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
#define S3C2400_GPG3_I2SSDO (0x02 << 6)
#define S3C2400_GPG3_I2SSDI (0x03 << 6)
-#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
-#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
#define S3C2400_GPG6_MMCDAT (0x02 << 12)
#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
#define S3C2400_GPG7_SPIMISO (0x02 << 14)
#define S3C2400_GPG7_IICSDA (0x03 << 14)
-#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
#define S3C2400_GPG8_IICSCL (0x03 << 16)
-#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
#define S3C2400_GPG9_SPICLK (0x02 << 18)
#define S3C2400_GPG9_MMCCLK (0x03 << 18)
-#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
-#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
#define S3C2443_GPG12_nINPACK (0x03 << 24)
-#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
#define S3C2443_GPG15_CF_PWR (0x03 << 30)
@@ -718,40 +607,29 @@
#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
-#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
-#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
-#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
-#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
-#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
-#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
-#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
-#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
-#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
#define S3C2410_GPH8_UCLK (0x02 << 16)
-#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
-#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 43f7536c5291..06a84adfb13f 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -225,8 +225,8 @@ static void amlm5900_init_pm(void)
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
}
}
static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 3410caefb869..496463768de7 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -213,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
{
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
static int bast_pm_resume(struct sys_device *sd)
{
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da4c256..d9cd5ddecf4a 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.udc_command = h1940_udc_pullup,
- .vbus_pin = S3C2410_GPG5,
+ .vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
};
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 83705036ca6b..0f6ed61af415 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -86,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@@ -100,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
.udc_command = n30_udc_pullup,
- .vbus_pin = S3C2410_GPG1,
+ .vbus_pin = S3C2410_GPG(1),
.vbus_pin_inverted = 0,
};
static struct gpio_keys_button n30_buttons[] = {
{
- .gpio = S3C2410_GPF0,
+ .gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG9,
+ .gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Thumbwheel Up",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG8,
+ .gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Thumbwheel Down",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG7,
+ .gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Thumbwheel Press",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
@@ -170,73 +170,73 @@ static struct platform_device n30_button_device = {
static struct gpio_keys_button n35_buttons[] = {
{
- .gpio = S3C2410_GPF0,
+ .gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG9,
+ .gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Joystick Up",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG8,
+ .gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Joystick Down",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG6,
+ .gpio = S3C2410_GPG(6),
.code = KEY_DOWN,
.desc = "Joystick Left",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG5,
+ .gpio = S3C2410_GPG(5),
.code = KEY_DOWN,
.desc = "Joystick Right",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG7,
+ .gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Joystick Press",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF3,
+ .gpio = S3C2410_GPF(3),
.code = SW_RADIO,
.desc = "GPS Antenna",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG2,
+ .gpio = S3C2410_GPG(2),
.code = SW_HEADPHONE_INSERT,
.desc = "Headphone",
.active_low = 0,
@@ -260,7 +260,7 @@ static struct platform_device n35_button_device = {
/* This is the bluetooth LED on the device. */
static struct s3c24xx_led_platdata n30_blue_led_pdata = {
.name = "blue_led",
- .gpio = S3C2410_GPG6,
+ .gpio = S3C2410_GPG(6),
.def_trigger = "",
};
@@ -271,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
static struct s3c24xx_led_platdata n30_warning_led_pdata = {
.name = "warning_led",
.flags = S3C24XX_LEDF_ACTLOW,
- .gpio = S3C2410_GPD9,
+ .gpio = S3C2410_GPD(9),
.def_trigger = "",
};
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 7520aee3c9e1..2cc9849eb448 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -199,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
/* LED */
static struct s3c24xx_led_platdata qt2410_pdata_led = {
- .gpio = S3C2410_GPB0,
+ .gpio = S3C2410_GPB(0),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led",
.def_trigger = "timer",
@@ -219,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
{
switch (cs) {
case BITBANG_CS_ACTIVE:
- s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
break;
case BITBANG_CS_INACTIVE:
- s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
break;
}
}
static struct s3c2410_spigpio_info spi_gpio_cfg = {
- .pin_clk = S3C2410_GPG7,
- .pin_mosi = S3C2410_GPG6,
- .pin_miso = S3C2410_GPG5,
+ .pin_clk = S3C2410_GPG(7),
+ .pin_mosi = S3C2410_GPG(6),
+ .pin_miso = S3C2410_GPG(5),
.chip_select = &spi_gpio_cs,
};
@@ -347,13 +347,13 @@ static void __init qt2410_machine_init(void)
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
- s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
- s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0507a7ec18ce..1628cc773a2c 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -278,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
static struct s3c24xx_led_platdata vr1000_led1_pdata = {
.name = "led1",
- .gpio = S3C2410_GPB0,
+ .gpio = S3C2410_GPB(0),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led2_pdata = {
.name = "led2",
- .gpio = S3C2410_GPB1,
+ .gpio = S3C2410_GPB(1),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led3_pdata = {
.name = "led3",
- .gpio = S3C2410_GPB2,
+ .gpio = S3C2410_GPB(2),
.def_trigger = "",
};
@@ -356,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
static void vr1000_power_off(void)
{
- s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
}
static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 726cfc093886..143e08a599d4 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -77,7 +77,7 @@ static void s3c2410_pm_prepare(void)
}
if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
}
@@ -92,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
__raw_writel(tmp, S3C2410_GSTATUS2);
if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
return 0;
}
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 506252b33fef..dd45eb4a6f0c 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -54,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
power_state[port] = to;
if (power_state[0] && power_state[1])
- s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(4), 0);
else
- s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
}
static irqreturn_t
@@ -64,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
{
struct s3c2410_hcd_info *info = pw;
- if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+ if (s3c2410_gpio_getpin(S3C2410_GPG(10)) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
s3c2410_usb_report_oc(info, 3);
} else {
@@ -110,7 +110,7 @@ int usb_simtec_init(void)
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
s3c_device_usb.dev.platform_data = &usb_simtec_info;
- s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(4), 1);
return 0;
}
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 56d12b56c9d9..8df506eac903 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -357,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
{
printk(KERN_DEBUG "%s(%d)\n", __func__, set);
- s3c2410_gpio_setpin(S3C2410_GPG13, set);
- s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
}
#undef LCD_UPPER_MARGIN
@@ -391,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
- s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_lcd_spi = {
.bus_num = 1,
- .pin_clk = S3C2410_GPG8,
- .pin_mosi = S3C2410_GPB8,
+ .pin_clk = S3C2410_GPG(8),
+ .pin_mosi = S3C2410_GPB(8),
.num_chipselect = 1,
.chip_select = jive_lcd_spi_chipselect,
};
@@ -413,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
- s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_wm8750_spi = {
.bus_num = 2,
- .pin_clk = S3C2410_GPB4,
- .pin_mosi = S3C2410_GPB9,
+ .pin_clk = S3C2410_GPB(4),
+ .pin_mosi = S3C2410_GPB(9),
.num_chipselect = 1,
.chip_select = jive_wm8750_chipselect,
};
@@ -480,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */
+ .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
};
/* Jive power management device */
@@ -530,8 +530,8 @@ static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
- s3c2410_gpio_setpin(S3C2410_GPC5, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
}
static void __init jive_machine_init(void)
@@ -635,22 +635,22 @@ static void __init jive_machine_init(void)
/* initialise the spi */
- s3c2410_gpio_setpin(S3C2410_GPG13, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB7, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB6, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPG8, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
/* initialise the WM8750 spi */
- s3c2410_gpio_setpin(S3C2410_GPH10, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 753aaedae551..9a5e43419722 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@@ -135,8 +135,8 @@ static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d363b6f9000c..68f3870991bf 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -469,7 +469,7 @@ static void __init anubis_map_io(void)
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
}
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e31278..dfc7010935da 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
- .gpio_detect = S3C2410_GPG10,
+ .gpio_detect = S3C2410_GPG(10),
};
/* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 4b2088cb05e7..d43edede590e 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -121,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+ s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+ s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index ad0fdc4a794a..cba064b49a64 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -292,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
@@ -305,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
@@ -385,7 +385,7 @@ static void __init osiris_map_io(void)
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index fe658c48f724..aa119863c5ce 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -48,27 +48,27 @@
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led4",
.def_trigger = "timer",
};
static struct s3c24xx_led_platdata smdk_pdata_led5 = {
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led5",
.def_trigger = "nand-disk",
};
static struct s3c24xx_led_platdata smdk_pdata_led6 = {
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led6",
};
static struct s3c24xx_led_platdata smdk_pdata_led7 = {
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led7",
};
@@ -185,15 +185,15 @@ void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPF4, 1);
- s3c2410_gpio_setpin(S3C2410_GPF5, 1);
- s3c2410_gpio_setpin(S3C2410_GPF6, 1);
- s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 65ebbaff7d50..ae0b9d6f3fb8 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,19 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
int s3c2410_gpio_getirq(unsigned int pin)
{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+ if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
return -1; /* not valid interrupts */
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+ if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
return -1; /* not valid pin */
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
+ if (pin < S3C2410_GPF(4))
+ return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
+ if (pin < S3C2410_GPG(0))
+ return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
+ return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 60a9f7247205..a82adc3c98a5 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -82,7 +82,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPACON,
.pm = __gpio_pm(&s3c_gpio_pm_1bit),
.chip = {
- .base = S3C2410_GPA0,
+ .base = S3C2410_GPA(0),
.owner = THIS_MODULE,
.label = "GPIOA",
.ngpio = 24,
@@ -94,7 +94,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPBCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPB0,
+ .base = S3C2410_GPB(0),
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
@@ -104,7 +104,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPCCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPC0,
+ .base = S3C2410_GPC(0),
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
@@ -114,7 +114,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPDCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPD0,
+ .base = S3C2410_GPD(0),
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
@@ -124,7 +124,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPECON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPE0,
+ .base = S3C2410_GPE(0),
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
@@ -134,7 +134,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPFCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPF0,
+ .base = S3C2410_GPF(0),
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
@@ -145,7 +145,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.base = S3C2410_GPGCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPG0,
+ .base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 10,
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 16aaf36b6e5a..56e5253ca02c 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -124,12 +124,12 @@ void s3c_pm_configure_extint(void)
* and then configure it as an input if it is not
*/
- for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+ for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+ s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
}
- for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+ s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
}
}
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index e0d18530555e..71a6accf114e 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -21,6 +21,6 @@ struct platform_device;
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cbb53d2..9edf7894eedd 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
- s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
- s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
- s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
- s3c2410_gpio_pullup(S3C2410_GPE11, 0);
- s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+ s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+ s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
} else {
- s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
- s3c2410_gpio_pullup(S3C2410_GPE11, 1);
- s3c2410_gpio_pullup(S3C2410_GPE12, 1);
- s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+ s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+ s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
}
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e549f0..f34d0fc69ad8 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
- s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
- s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPG5, 0);
- s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+ s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
} else {
- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
- s3c2410_gpio_pullup(S3C2410_GPG5, 1);
- s3c2410_gpio_pullup(S3C2410_GPG6, 1);
- s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+ s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+ s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
}
}