diff options
Diffstat (limited to 'arch/x86/kernel')
81 files changed, 1024 insertions, 11409 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 7338ef2218bc..250806472a7e 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -36,7 +36,7 @@ obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o ldt.o dumpstack.o obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o obj-$(CONFIG_IRQ_WORK) += irq_work.o -obj-$(CONFIG_X86_32) += probe_roms_32.o +obj-y += probe_roms.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o @@ -117,7 +117,7 @@ obj-$(CONFIG_OF) += devicetree.o ifeq ($(CONFIG_X86_64),y) obj-$(CONFIG_AUDIT) += audit_64.o - obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o + obj-$(CONFIG_GART_IOMMU) += amd_gart_64.o aperture_64.o obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_AMD_IOMMU) += amd_iommu_init.o amd_iommu.o diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index ff93bc1b09c3..18a857ba7a25 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -112,11 +112,6 @@ static int __init acpi_sleep_setup(char *str) #ifdef CONFIG_HIBERNATION if (strncmp(str, "s4_nohwsig", 10) == 0) acpi_no_s4_hw_signature(); - if (strncmp(str, "s4_nonvs", 8) == 0) { - pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, " - "please use acpi_sleep=nonvs instead"); - acpi_nvs_nosave(); - } #endif if (strncmp(str, "nonvs", 5) == 0) acpi_nvs_nosave(); diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 4a234677e213..a81f2d52f869 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -67,17 +67,30 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt); #define DPRINTK(fmt, args...) if (debug_alternative) \ printk(KERN_DEBUG fmt, args) +/* + * Each GENERIC_NOPX is of X bytes, and defined as an array of bytes + * that correspond to that nop. Getting from one nop to the next, we + * add to the array the offset that is equal to the sum of all sizes of + * nops preceding the one we are after. + * + * Note: The GENERIC_NOP5_ATOMIC is at the end, as it breaks the + * nice symmetry of sizes of the previous nops. + */ #if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64) -/* Use inline assembly to define this because the nops are defined - as inline assembly strings in the include files and we cannot - get them easily into strings. */ -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: " - GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 - GENERIC_NOP7 GENERIC_NOP8 - "\t.previous"); -extern const unsigned char intelnops[]; -static const unsigned char *const __initconst_or_module -intel_nops[ASM_NOP_MAX+1] = { +static const unsigned char intelnops[] = +{ + GENERIC_NOP1, + GENERIC_NOP2, + GENERIC_NOP3, + GENERIC_NOP4, + GENERIC_NOP5, + GENERIC_NOP6, + GENERIC_NOP7, + GENERIC_NOP8, + GENERIC_NOP5_ATOMIC +}; +static const unsigned char * const intel_nops[ASM_NOP_MAX+2] = +{ NULL, intelnops, intelnops + 1, @@ -87,17 +100,25 @@ intel_nops[ASM_NOP_MAX+1] = { intelnops + 1 + 2 + 3 + 4 + 5, intelnops + 1 + 2 + 3 + 4 + 5 + 6, intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif #ifdef K8_NOP1 -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: " - K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 - K8_NOP7 K8_NOP8 - "\t.previous"); -extern const unsigned char k8nops[]; -static const unsigned char *const __initconst_or_module -k8_nops[ASM_NOP_MAX+1] = { +static const unsigned char k8nops[] = +{ + K8_NOP1, + K8_NOP2, + K8_NOP3, + K8_NOP4, + K8_NOP5, + K8_NOP6, + K8_NOP7, + K8_NOP8, + K8_NOP5_ATOMIC +}; +static const unsigned char * const k8_nops[ASM_NOP_MAX+2] = +{ NULL, k8nops, k8nops + 1, @@ -107,17 +128,25 @@ k8_nops[ASM_NOP_MAX+1] = { k8nops + 1 + 2 + 3 + 4 + 5, k8nops + 1 + 2 + 3 + 4 + 5 + 6, k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif #if defined(K7_NOP1) && !defined(CONFIG_X86_64) -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: " - K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 - K7_NOP7 K7_NOP8 - "\t.previous"); -extern const unsigned char k7nops[]; -static const unsigned char *const __initconst_or_module -k7_nops[ASM_NOP_MAX+1] = { +static const unsigned char k7nops[] = +{ + K7_NOP1, + K7_NOP2, + K7_NOP3, + K7_NOP4, + K7_NOP5, + K7_NOP6, + K7_NOP7, + K7_NOP8, + K7_NOP5_ATOMIC +}; +static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = +{ NULL, k7nops, k7nops + 1, @@ -127,17 +156,25 @@ k7_nops[ASM_NOP_MAX+1] = { k7nops + 1 + 2 + 3 + 4 + 5, k7nops + 1 + 2 + 3 + 4 + 5 + 6, k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif #ifdef P6_NOP1 -asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: " - P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6 - P6_NOP7 P6_NOP8 - "\t.previous"); -extern const unsigned char p6nops[]; -static const unsigned char *const __initconst_or_module -p6_nops[ASM_NOP_MAX+1] = { +static const unsigned char __initconst_or_module p6nops[] = +{ + P6_NOP1, + P6_NOP2, + P6_NOP3, + P6_NOP4, + P6_NOP5, + P6_NOP6, + P6_NOP7, + P6_NOP8, + P6_NOP5_ATOMIC +}; +static const unsigned char * const p6_nops[ASM_NOP_MAX+2] = +{ NULL, p6nops, p6nops + 1, @@ -147,47 +184,65 @@ p6_nops[ASM_NOP_MAX+1] = { p6nops + 1 + 2 + 3 + 4 + 5, p6nops + 1 + 2 + 3 + 4 + 5 + 6, p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, + p6nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, }; #endif +/* Initialize these to a safe default */ #ifdef CONFIG_X86_64 +const unsigned char * const *ideal_nops = p6_nops; +#else +const unsigned char * const *ideal_nops = intel_nops; +#endif -extern char __vsyscall_0; -static const unsigned char *const *__init_or_module find_nop_table(void) +void __init arch_init_ideal_nops(void) { - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && - boot_cpu_has(X86_FEATURE_NOPL)) - return p6_nops; - else - return k8_nops; -} - -#else /* CONFIG_X86_64 */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + /* + * Due to a decoder implementation quirk, some + * specific Intel CPUs actually perform better with + * the "k8_nops" than with the SDM-recommended NOPs. + */ + if (boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model >= 0x0f && + boot_cpu_data.x86_model != 0x1c && + boot_cpu_data.x86_model != 0x26 && + boot_cpu_data.x86_model != 0x27 && + boot_cpu_data.x86_model < 0x30) { + ideal_nops = k8_nops; + } else if (boot_cpu_has(X86_FEATURE_NOPL)) { + ideal_nops = p6_nops; + } else { +#ifdef CONFIG_X86_64 + ideal_nops = k8_nops; +#else + ideal_nops = intel_nops; +#endif + } -static const unsigned char *const *__init_or_module find_nop_table(void) -{ - if (boot_cpu_has(X86_FEATURE_K8)) - return k8_nops; - else if (boot_cpu_has(X86_FEATURE_K7)) - return k7_nops; - else if (boot_cpu_has(X86_FEATURE_NOPL)) - return p6_nops; - else - return intel_nops; + default: +#ifdef CONFIG_X86_64 + ideal_nops = k8_nops; +#else + if (boot_cpu_has(X86_FEATURE_K8)) + ideal_nops = k8_nops; + else if (boot_cpu_has(X86_FEATURE_K7)) + ideal_nops = k7_nops; + else + ideal_nops = intel_nops; +#endif + } } -#endif /* CONFIG_X86_64 */ - /* Use this to add nops to a buffer, then text_poke the whole buffer. */ static void __init_or_module add_nops(void *insns, unsigned int len) { - const unsigned char *const *noptable = find_nop_table(); - while (len > 0) { unsigned int noplen = len; if (noplen > ASM_NOP_MAX) noplen = ASM_NOP_MAX; - memcpy(insns, noptable[noplen], noplen); + memcpy(insns, ideal_nops[noplen], noplen); insns += noplen; len -= noplen; } @@ -195,6 +250,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len) extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; extern s32 __smp_locks[], __smp_locks_end[]; +extern char __vsyscall_0; void *text_poke_early(void *addr, const void *opcode, size_t len); /* Replace instructions with better alternatives for this CPU type. @@ -210,6 +266,15 @@ void __init_or_module apply_alternatives(struct alt_instr *start, u8 insnbuf[MAX_PATCH_LEN]; DPRINTK("%s: alt table %p -> %p\n", __func__, start, end); + /* + * The scan order should be from start to end. A later scanned + * alternative code can overwrite a previous scanned alternative code. + * Some kernel functions (e.g. memcpy, memset, etc) use this order to + * patch code. + * + * So be careful if you want to change the scan order to any other + * order. + */ for (a = start; a < end; a++) { u8 *instr = a->instr; BUG_ON(a->replacementlen > a->instrlen); @@ -678,29 +743,3 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n) wrote_text = 0; __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL); } - -#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL) - -#ifdef CONFIG_X86_64 -unsigned char ideal_nop5[5] = { 0x66, 0x66, 0x66, 0x66, 0x90 }; -#else -unsigned char ideal_nop5[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 }; -#endif - -void __init arch_init_ideal_nop5(void) -{ - /* - * There is no good nop for all x86 archs. This selection - * algorithm should be unified with the one in find_nop_table(), - * but this should be good enough for now. - * - * For cases other than the ones below, use the safe (as in - * always functional) defaults above. - */ -#ifdef CONFIG_X86_64 - /* Don't use these on 32 bits due to broken virtualizers */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - memcpy(ideal_nop5, p6_nops[5], 5); -#endif -} -#endif diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/amd_gart_64.c index b117efd24f71..b117efd24f71 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 57ca77787220..cd8cbeb5fa34 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -18,6 +18,7 @@ */ #include <linux/pci.h> +#include <linux/pci-ats.h> #include <linux/bitmap.h> #include <linux/slab.h> #include <linux/debugfs.h> @@ -25,6 +26,7 @@ #include <linux/dma-mapping.h> #include <linux/iommu-helper.h> #include <linux/iommu.h> +#include <linux/delay.h> #include <asm/proto.h> #include <asm/iommu.h> #include <asm/gart.h> @@ -34,7 +36,7 @@ #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28)) -#define EXIT_LOOP_COUNT 10000000 +#define LOOP_TIMEOUT 100000 static DEFINE_RWLOCK(amd_iommu_devtable_lock); @@ -57,7 +59,6 @@ struct iommu_cmd { u32 data[4]; }; -static void reset_iommu_command_buffer(struct amd_iommu *iommu); static void update_domain(struct protection_domain *domain); /**************************************************************************** @@ -322,8 +323,6 @@ static void iommu_print_event(struct amd_iommu *iommu, void *__evt) break; case EVENT_TYPE_ILL_CMD: printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address); - iommu->reset_in_progress = true; - reset_iommu_command_buffer(iommu); dump_command(address); break; case EVENT_TYPE_CMD_HARD_ERR: @@ -367,7 +366,7 @@ static void iommu_poll_events(struct amd_iommu *iommu) spin_unlock_irqrestore(&iommu->lock, flags); } -irqreturn_t amd_iommu_int_handler(int irq, void *data) +irqreturn_t amd_iommu_int_thread(int irq, void *data) { struct amd_iommu *iommu; @@ -377,192 +376,300 @@ irqreturn_t amd_iommu_int_handler(int irq, void *data) return IRQ_HANDLED; } +irqreturn_t amd_iommu_int_handler(int irq, void *data) +{ + return IRQ_WAKE_THREAD; +} + /**************************************************************************** * * IOMMU command queuing functions * ****************************************************************************/ -/* - * Writes the command to the IOMMUs command buffer and informs the - * hardware about the new command. Must be called with iommu->lock held. - */ -static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) +static int wait_on_sem(volatile u64 *sem) +{ + int i = 0; + + while (*sem == 0 && i < LOOP_TIMEOUT) { + udelay(1); + i += 1; + } + + if (i == LOOP_TIMEOUT) { + pr_alert("AMD-Vi: Completion-Wait loop timed out\n"); + return -EIO; + } + + return 0; +} + +static void copy_cmd_to_buffer(struct amd_iommu *iommu, + struct iommu_cmd *cmd, + u32 tail) { - u32 tail, head; u8 *target; - WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED); - tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); target = iommu->cmd_buf + tail; - memcpy_toio(target, cmd, sizeof(*cmd)); - tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; - head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); - if (tail == head) - return -ENOMEM; + tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; + + /* Copy command to buffer */ + memcpy(target, cmd, sizeof(*cmd)); + + /* Tell the IOMMU about it */ writel(tail, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); +} - return 0; +static void build_completion_wait(struct iommu_cmd *cmd, u64 address) +{ + WARN_ON(address & 0x7ULL); + + memset(cmd, 0, sizeof(*cmd)); + cmd->data[0] = lower_32_bits(__pa(address)) | CMD_COMPL_WAIT_STORE_MASK; + cmd->data[1] = upper_32_bits(__pa(address)); + cmd->data[2] = 1; + CMD_SET_TYPE(cmd, CMD_COMPL_WAIT); +} + +static void build_inv_dte(struct iommu_cmd *cmd, u16 devid) +{ + memset(cmd, 0, sizeof(*cmd)); + cmd->data[0] = devid; + CMD_SET_TYPE(cmd, CMD_INV_DEV_ENTRY); +} + +static void build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address, + size_t size, u16 domid, int pde) +{ + u64 pages; + int s; + + pages = iommu_num_pages(address, size, PAGE_SIZE); + s = 0; + + if (pages > 1) { + /* + * If we have to flush more than one page, flush all + * TLB entries for this domain + */ + address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + s = 1; + } + + address &= PAGE_MASK; + + memset(cmd, 0, sizeof(*cmd)); + cmd->data[1] |= domid; + cmd->data[2] = lower_32_bits(address); + cmd->data[3] = upper_32_bits(address); + CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES); + if (s) /* size bit - we flush more than one 4kb page */ + cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; + if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ + cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; +} + +static void build_inv_iotlb_pages(struct iommu_cmd *cmd, u16 devid, int qdep, + u64 address, size_t size) +{ + u64 pages; + int s; + + pages = iommu_num_pages(address, size, PAGE_SIZE); + s = 0; + + if (pages > 1) { + /* + * If we have to flush more than one page, flush all + * TLB entries for this domain + */ + address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + s = 1; + } + + address &= PAGE_MASK; + + memset(cmd, 0, sizeof(*cmd)); + cmd->data[0] = devid; + cmd->data[0] |= (qdep & 0xff) << 24; + cmd->data[1] = devid; + cmd->data[2] = lower_32_bits(address); + cmd->data[3] = upper_32_bits(address); + CMD_SET_TYPE(cmd, CMD_INV_IOTLB_PAGES); + if (s) + cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; +} + +static void build_inv_all(struct iommu_cmd *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + CMD_SET_TYPE(cmd, CMD_INV_ALL); } /* - * General queuing function for commands. Takes iommu->lock and calls - * __iommu_queue_command(). + * Writes the command to the IOMMUs command buffer and informs the + * hardware about the new command. */ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) { + u32 left, tail, head, next_tail; unsigned long flags; - int ret; + WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED); + +again: spin_lock_irqsave(&iommu->lock, flags); - ret = __iommu_queue_command(iommu, cmd); - if (!ret) - iommu->need_sync = true; - spin_unlock_irqrestore(&iommu->lock, flags); - return ret; -} + head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET); + tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET); + next_tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size; + left = (head - next_tail) % iommu->cmd_buf_size; -/* - * This function waits until an IOMMU has completed a completion - * wait command - */ -static void __iommu_wait_for_completion(struct amd_iommu *iommu) -{ - int ready = 0; - unsigned status = 0; - unsigned long i = 0; + if (left <= 2) { + struct iommu_cmd sync_cmd; + volatile u64 sem = 0; + int ret; + + build_completion_wait(&sync_cmd, (u64)&sem); + copy_cmd_to_buffer(iommu, &sync_cmd, tail); - INC_STATS_COUNTER(compl_wait); + spin_unlock_irqrestore(&iommu->lock, flags); + + if ((ret = wait_on_sem(&sem)) != 0) + return ret; - while (!ready && (i < EXIT_LOOP_COUNT)) { - ++i; - /* wait for the bit to become one */ - status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET); - ready = status & MMIO_STATUS_COM_WAIT_INT_MASK; + goto again; } - /* set bit back to zero */ - status &= ~MMIO_STATUS_COM_WAIT_INT_MASK; - writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET); + copy_cmd_to_buffer(iommu, cmd, tail); + + /* We need to sync now to make sure all commands are processed */ + iommu->need_sync = true; + + spin_unlock_irqrestore(&iommu->lock, flags); - if (unlikely(i == EXIT_LOOP_COUNT)) - iommu->reset_in_progress = true; + return 0; } /* * This function queues a completion wait command into the command * buffer of an IOMMU */ -static int __iommu_completion_wait(struct amd_iommu *iommu) +static int iommu_completion_wait(struct amd_iommu *iommu) { struct iommu_cmd cmd; + volatile u64 sem = 0; + int ret; + + if (!iommu->need_sync) + return 0; - memset(&cmd, 0, sizeof(cmd)); - cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; - CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT); + build_completion_wait(&cmd, (u64)&sem); - return __iommu_queue_command(iommu, &cmd); + ret = iommu_queue_command(iommu, &cmd); + if (ret) + return ret; + + return wait_on_sem(&sem); } -/* - * This function is called whenever we need to ensure that the IOMMU has - * completed execution of all commands we sent. It sends a - * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs - * us about that by writing a value to a physical address we pass with - * the command. - */ -static int iommu_completion_wait(struct amd_iommu *iommu) +static int iommu_flush_dte(struct amd_iommu *iommu, u16 devid) { - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&iommu->lock, flags); + struct iommu_cmd cmd; - if (!iommu->need_sync) - goto out; + build_inv_dte(&cmd, devid); - ret = __iommu_completion_wait(iommu); + return iommu_queue_command(iommu, &cmd); +} - iommu->need_sync = false; +static void iommu_flush_dte_all(struct amd_iommu *iommu) +{ + u32 devid; - if (ret) - goto out; + for (devid = 0; devid <= 0xffff; ++devid) + iommu_flush_dte(iommu, devid); - __iommu_wait_for_completion(iommu); + iommu_completion_wait(iommu); +} -out: - spin_unlock_irqrestore(&iommu->lock, flags); +/* + * This function uses heavy locking and may disable irqs for some time. But + * this is no issue because it is only called during resume. + */ +static void iommu_flush_tlb_all(struct amd_iommu *iommu) +{ + u32 dom_id; - if (iommu->reset_in_progress) - reset_iommu_command_buffer(iommu); + for (dom_id = 0; dom_id <= 0xffff; ++dom_id) { + struct iommu_cmd cmd; + build_inv_iommu_pages(&cmd, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, + dom_id, 1); + iommu_queue_command(iommu, &cmd); + } - return 0; + iommu_completion_wait(iommu); } -static void iommu_flush_complete(struct protection_domain *domain) +static void iommu_flush_all(struct amd_iommu *iommu) { - int i; + struct iommu_cmd cmd; - for (i = 0; i < amd_iommus_present; ++i) { - if (!domain->dev_iommu[i]) - continue; + build_inv_all(&cmd); - /* - * Devices of this domain are behind this IOMMU - * We need to wait for completion of all commands. - */ - iommu_completion_wait(amd_iommus[i]); + iommu_queue_command(iommu, &cmd); + iommu_completion_wait(iommu); +} + +void iommu_flush_all_caches(struct amd_iommu *iommu) +{ + if (iommu_feature(iommu, FEATURE_IA)) { + iommu_flush_all(iommu); + } else { + iommu_flush_dte_all(iommu); + iommu_flush_tlb_all(iommu); } } /* - * Command send function for invalidating a device table entry + * Command send function for flushing on-device TLB */ -static int iommu_flush_device(struct device *dev) +static int device_flush_iotlb(struct device *dev, u64 address, size_t size) { + struct pci_dev *pdev = to_pci_dev(dev); struct amd_iommu *iommu; struct iommu_cmd cmd; u16 devid; + int qdep; + qdep = pci_ats_queue_depth(pdev); devid = get_device_id(dev); iommu = amd_iommu_rlookup_table[devid]; - /* Build command */ - memset(&cmd, 0, sizeof(cmd)); - CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY); - cmd.data[0] = devid; + build_inv_iotlb_pages(&cmd, devid, qdep, address, size); return iommu_queue_command(iommu, &cmd); } -static void __iommu_build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address, - u16 domid, int pde, int s) -{ - memset(cmd, 0, sizeof(*cmd)); - address &= PAGE_MASK; - CMD_SET_TYPE(cmd, CMD_INV_IOMMU_PAGES); - cmd->data[1] |= domid; - cmd->data[2] = lower_32_bits(address); - cmd->data[3] = upper_32_bits(address); - if (s) /* size bit - we flush more than one 4kb page */ - cmd->data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; - if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ - cmd->data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; -} - /* - * Generic command send function for invalidaing TLB entries + * Command send function for invalidating a device table entry */ -static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, - u64 address, u16 domid, int pde, int s) +static int device_flush_dte(struct device *dev) { - struct iommu_cmd cmd; + struct amd_iommu *iommu; + struct pci_dev *pdev; + u16 devid; int ret; - __iommu_build_inv_iommu_pages(&cmd, address, domid, pde, s); + pdev = to_pci_dev(dev); + devid = get_device_id(dev); + iommu = amd_iommu_rlookup_table[devid]; - ret = iommu_queue_command(iommu, &cmd); + ret = iommu_flush_dte(iommu, devid); + if (ret) + return ret; + + if (pci_ats_enabled(pdev)) + ret = device_flush_iotlb(dev, 0, ~0UL); return ret; } @@ -572,23 +679,14 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, * It invalidates a single PTE if the range to flush is within a single * page. Otherwise it flushes the whole TLB of the IOMMU. */ -static void __iommu_flush_pages(struct protection_domain *domain, - u64 address, size_t size, int pde) +static void __domain_flush_pages(struct protection_domain *domain, + u64 address, size_t size, int pde) { - int s = 0, i; - unsigned long pages = iommu_num_pages(address, size, PAGE_SIZE); - - address &= PAGE_MASK; - - if (pages > 1) { - /* - * If we have to flush more than one page, flush all - * TLB entries for this domain - */ - address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; - s = 1; - } + struct iommu_dev_data *dev_data; + struct iommu_cmd cmd; + int ret = 0, i; + build_inv_iommu_pages(&cmd, address, size, domain->id, pde); for (i = 0; i < amd_iommus_present; ++i) { if (!domain->dev_iommu[i]) @@ -598,101 +696,70 @@ static void __iommu_flush_pages(struct protection_domain *domain, * Devices of this domain are behind this IOMMU * We need a TLB flush */ - iommu_queue_inv_iommu_pages(amd_iommus[i], address, - domain->id, pde, s); + ret |= iommu_queue_command(amd_iommus[i], &cmd); + } + + list_for_each_entry(dev_data, &domain->dev_list, list) { + struct pci_dev *pdev = to_pci_dev(dev_data->dev); + + if (!pci_ats_enabled(pdev)) + continue; + + ret |= device_flush_iotlb(dev_data->dev, address, size); } - return; + WARN_ON(ret); } -static void iommu_flush_pages(struct protection_domain *domain, - u64 address, size_t size) +static void domain_flush_pages(struct protection_domain *domain, + u64 address, size_t size) { - __iommu_flush_pages(domain, address, size, 0); + __domain_flush_pages(domain, address, size, 0); } /* Flush the whole IO/TLB for a given protection domain */ -static void iommu_flush_tlb(struct protection_domain *domain) +static void domain_flush_tlb(struct protection_domain *domain) { - __iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0); + __domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0); } /* Flush the whole IO/TLB for a given protection domain - including PDE */ -static void iommu_flush_tlb_pde(struct protection_domain *domain) +static void domain_flush_tlb_pde(struct protection_domain *domain) { - __iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1); -} - - -/* - * This function flushes the DTEs for all devices in domain - */ -static void iommu_flush_domain_devices(struct protection_domain *domain) -{ - struct iommu_dev_data *dev_data; - unsigned long flags; - - spin_lock_irqsave(&domain->lock, flags); - - list_for_each_entry(dev_data, &domain->dev_list, list) - iommu_flush_device(dev_data->dev); - - spin_unlock_irqrestore(&domain->lock, flags); + __domain_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1); } -static void iommu_flush_all_domain_devices(void) +static void domain_flush_complete(struct protection_domain *domain) { - struct protection_domain *domain; - unsigned long flags; + int i; - spin_lock_irqsave(&amd_iommu_pd_lock, flags); + for (i = 0; i < amd_iommus_present; ++i) { + if (!domain->dev_iommu[i]) + continue; - list_for_each_entry(domain, &amd_iommu_pd_list, list) { - iommu_flush_domain_devices(domain); - iommu_flush_complete(domain); + /* + * Devices of this domain are behind this IOMMU + * We need to wait for completion of all commands. + */ + iommu_completion_wait(amd_iommus[i]); } - - spin_unlock_irqrestore(&amd_iommu_pd_lock, flags); } -void amd_iommu_flush_all_devices(void) -{ - iommu_flush_all_domain_devices(); -} /* - * This function uses heavy locking and may disable irqs for some time. But - * this is no issue because it is only called during resume. + * This function flushes the DTEs for all devices in domain */ -void amd_iommu_flush_all_domains(void) +static void domain_flush_devices(struct protection_domain *domain) { - struct protection_domain *domain; + struct iommu_dev_data *dev_data; unsigned long flags; - spin_lock_irqsave(&amd_iommu_pd_lock, flags); - - list_for_each_entry(domain, &amd_iommu_pd_list, list) { - spin_lock(&domain->lock); - iommu_flush_tlb_pde(domain); - iommu_flush_complete(domain); - spin_unlock(&domain->lock); - } - - spin_unlock_irqrestore(&amd_iommu_pd_lock, flags); -} - -static void reset_iommu_command_buffer(struct amd_iommu *iommu) -{ - pr_err("AMD-Vi: Resetting IOMMU command buffer\n"); - - if (iommu->reset_in_progress) - panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n"); + spin_lock_irqsave(&domain->lock, flags); - amd_iommu_reset_cmd_buffer(iommu); - amd_iommu_flush_all_devices(); - amd_iommu_flush_all_domains(); + list_for_each_entry(dev_data, &domain->dev_list, list) + device_flush_dte(dev_data->dev); - iommu->reset_in_progress = false; + spin_unlock_irqrestore(&domain->lock, flags); } /**************************************************************************** @@ -1410,17 +1477,22 @@ static bool dma_ops_domain(struct protection_domain *domain) return domain->flags & PD_DMA_OPS_MASK; } -static void set_dte_entry(u16 devid, struct protection_domain *domain) +static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats) { u64 pte_root = virt_to_phys(domain->pt_root); + u32 flags = 0; pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK) << DEV_ENTRY_MODE_SHIFT; pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV; - amd_iommu_dev_table[devid].data[2] = domain->id; - amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root); - amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root); + if (ats) + flags |= DTE_FLAG_IOTLB; + + amd_iommu_dev_table[devid].data[3] |= flags; + amd_iommu_dev_table[devid].data[2] = domain->id; + amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root); + amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root); } static void clear_dte_entry(u16 devid) @@ -1437,23 +1509,29 @@ static void do_attach(struct device *dev, struct protection_domain *domain) { struct iommu_dev_data *dev_data; struct amd_iommu *iommu; + struct pci_dev *pdev; + bool ats = false; u16 devid; devid = get_device_id(dev); iommu = amd_iommu_rlookup_table[devid]; dev_data = get_dev_data(dev); + pdev = to_pci_dev(dev); + + if (amd_iommu_iotlb_sup) + ats = pci_ats_enabled(pdev); /* Update data structures */ dev_data->domain = domain; list_add(&dev_data->list, &domain->dev_list); - set_dte_entry(devid, domain); + set_dte_entry(devid, domain, ats); /* Do reference counting */ domain->dev_iommu[iommu->index] += 1; domain->dev_cnt += 1; /* Flush the DTE entry */ - iommu_flush_device(dev); + device_flush_dte(dev); } static void do_detach(struct device *dev) @@ -1476,7 +1554,7 @@ static void do_detach(struct device *dev) clear_dte_entry(devid); /* Flush the DTE entry */ - iommu_flush_device(dev); + device_flush_dte(dev); } /* @@ -1539,9 +1617,13 @@ out_unlock: static int attach_device(struct device *dev, struct protection_domain *domain) { + struct pci_dev *pdev = to_pci_dev(dev); unsigned long flags; int ret; + if (amd_iommu_iotlb_sup) + pci_enable_ats(pdev, PAGE_SHIFT); + write_lock_irqsave(&amd_iommu_devtable_lock, flags); ret = __attach_device(dev, domain); write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); @@ -1551,7 +1633,7 @@ static int attach_device(struct device *dev, * left the caches in the IOMMU dirty. So we have to flush * here to evict all dirty stuff. */ - iommu_flush_tlb_pde(domain); + domain_flush_tlb_pde(domain); return ret; } @@ -1598,12 +1680,16 @@ static void __detach_device(struct device *dev) */ static void detach_device(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); unsigned long flags; /* lock device table */ write_lock_irqsave(&amd_iommu_devtable_lock, flags); __detach_device(dev); write_unlock_irqrestore(&amd_iommu_devtable_lock, flags); + + if (amd_iommu_iotlb_sup && pci_ats_enabled(pdev)) + pci_disable_ats(pdev); } /* @@ -1615,10 +1701,9 @@ static struct protection_domain *domain_for_device(struct device *dev) struct protection_domain *dom; struct iommu_dev_data *dev_data, *alias_data; unsigned long flags; - u16 devid, alias; + u16 devid; devid = get_device_id(dev); - alias = amd_iommu_alias_table[devid]; dev_data = get_dev_data(dev); alias_data = get_dev_data(dev_data->alias); if (!alias_data) @@ -1692,7 +1777,7 @@ static int device_change_notifier(struct notifier_block *nb, goto out; } - iommu_flush_device(dev); + device_flush_dte(dev); iommu_completion_wait(iommu); out: @@ -1753,8 +1838,9 @@ static void update_device_table(struct protection_domain *domain) struct iommu_dev_data *dev_data; list_for_each_entry(dev_data, &domain->dev_list, list) { + struct pci_dev *pdev = to_pci_dev(dev_data->dev); u16 devid = get_device_id(dev_data->dev); - set_dte_entry(devid, domain); + set_dte_entry(devid, domain, pci_ats_enabled(pdev)); } } @@ -1764,8 +1850,9 @@ static void update_domain(struct protection_domain *domain) return; update_device_table(domain); - iommu_flush_domain_devices(domain); - iommu_flush_tlb_pde(domain); + + domain_flush_devices(domain); + domain_flush_tlb_pde(domain); domain->updated = false; } @@ -1924,10 +2011,10 @@ retry: ADD_STATS_COUNTER(alloced_io_mem, size); if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) { - iommu_flush_tlb(&dma_dom->domain); + domain_flush_tlb(&dma_dom->domain); dma_dom->need_flush = false; } else if (unlikely(amd_iommu_np_cache)) - iommu_flush_pages(&dma_dom->domain, address, size); + domain_flush_pages(&dma_dom->domain, address, size); out: return address; @@ -1976,7 +2063,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom, dma_ops_free_addresses(dma_dom, dma_addr, pages); if (amd_iommu_unmap_flush || dma_dom->need_flush) { - iommu_flush_pages(&dma_dom->domain, flush_addr, size); + domain_flush_pages(&dma_dom->domain, flush_addr, size); dma_dom->need_flush = false; } } @@ -2012,7 +2099,7 @@ static dma_addr_t map_page(struct device *dev, struct page *page, if (addr == DMA_ERROR_CODE) goto out; - iommu_flush_complete(domain); + domain_flush_complete(domain); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -2039,7 +2126,7 @@ static void unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, __unmap_single(domain->priv, dma_addr, size, dir); - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); } @@ -2104,7 +2191,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist, goto unmap; } - iommu_flush_complete(domain); + domain_flush_complete(domain); out: spin_unlock_irqrestore(&domain->lock, flags); @@ -2150,7 +2237,7 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist, s->dma_address = s->dma_length = 0; } - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); } @@ -2200,7 +2287,7 @@ static void *alloc_coherent(struct device *dev, size_t size, goto out_free; } - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); @@ -2232,7 +2319,7 @@ static void free_coherent(struct device *dev, size_t size, __unmap_single(domain->priv, dma_addr, size, DMA_BIDIRECTIONAL); - iommu_flush_complete(domain); + domain_flush_complete(domain); spin_unlock_irqrestore(&domain->lock, flags); @@ -2476,7 +2563,7 @@ static void amd_iommu_detach_device(struct iommu_domain *dom, if (!iommu) return; - iommu_flush_device(dev); + device_flush_dte(dev); iommu_completion_wait(iommu); } @@ -2542,7 +2629,7 @@ static int amd_iommu_unmap(struct iommu_domain *dom, unsigned long iova, unmap_size = iommu_unmap_page(domain, iova, page_size); mutex_unlock(&domain->api_lock); - iommu_flush_tlb_pde(domain); + domain_flush_tlb_pde(domain); return get_order(unmap_size); } diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 246d727b65b7..9179c21120a8 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -137,6 +137,7 @@ int amd_iommus_present; /* IOMMUs have a non-present cache? */ bool amd_iommu_np_cache __read_mostly; +bool amd_iommu_iotlb_sup __read_mostly = true; /* * The ACPI table parsing functions set this variable on an error @@ -180,6 +181,12 @@ static u32 dev_table_size; /* size of the device table */ static u32 alias_table_size; /* size of the alias table */ static u32 rlookup_table_size; /* size if the rlookup table */ +/* + * This function flushes all internal caches of + * the IOMMU used by this driver. + */ +extern void iommu_flush_all_caches(struct amd_iommu *iommu); + static inline void update_last_devid(u16 devid) { if (devid > amd_iommu_last_bdf) @@ -293,9 +300,23 @@ static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit) /* Function to enable the hardware */ static void iommu_enable(struct amd_iommu *iommu) { - printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n", + static const char * const feat_str[] = { + "PreF", "PPR", "X2APIC", "NX", "GT", "[5]", + "IA", "GA", "HE", "PC", NULL + }; + int i; + + printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx", dev_name(&iommu->dev->dev), iommu->cap_ptr); + if (iommu->cap & (1 << IOMMU_CAP_EFR)) { + printk(KERN_CONT " extended features: "); + for (i = 0; feat_str[i]; ++i) + if (iommu_feature(iommu, (1ULL << i))) + printk(KERN_CONT " %s", feat_str[i]); + } + printk(KERN_CONT "\n"); + iommu_feature_enable(iommu, CONTROL_IOMMU_EN); } @@ -651,7 +672,7 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) static void __init init_iommu_from_pci(struct amd_iommu *iommu) { int cap_ptr = iommu->cap_ptr; - u32 range, misc; + u32 range, misc, low, high; int i, j; pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET, @@ -667,6 +688,15 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu) MMIO_GET_LD(range)); iommu->evt_msi_num = MMIO_MSI_NUM(misc); + if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB))) + amd_iommu_iotlb_sup = false; + + /* read extended feature bits */ + low = readl(iommu->mmio_base + MMIO_EXT_FEATURES); + high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4); + + iommu->features = ((u64)high << 32) | low; + if (!is_rd890_iommu(iommu->dev)) return; @@ -1004,10 +1034,11 @@ static int iommu_setup_msi(struct amd_iommu *iommu) if (pci_enable_msi(iommu->dev)) return 1; - r = request_irq(iommu->dev->irq, amd_iommu_int_handler, - IRQF_SAMPLE_RANDOM, - "AMD-Vi", - NULL); + r = request_threaded_irq(iommu->dev->irq, + amd_iommu_int_handler, + amd_iommu_int_thread, + 0, "AMD-Vi", + iommu->dev); if (r) { pci_disable_msi(iommu->dev); @@ -1244,6 +1275,7 @@ static void enable_iommus(void) iommu_set_exclusion_range(iommu); iommu_init_msi(iommu); iommu_enable(iommu); + iommu_flush_all_caches(iommu); } } @@ -1274,8 +1306,8 @@ static void amd_iommu_resume(void) * we have to flush after the IOMMUs are enabled because a * disabled IOMMU will never execute the commands we send */ - amd_iommu_flush_all_devices(); - amd_iommu_flush_all_domains(); + for_each_iommu(iommu) + iommu_flush_all_caches(iommu); } static int amd_iommu_suspend(void) diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index cd1ffed4ee22..289e92862fd9 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -177,7 +177,6 @@ static struct clocksource clocksource_apbt = { .rating = APBT_CLOCKSOURCE_RATING, .read = apbt_read_clocksource, .mask = APBT_MASK, - .shift = APBT_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, .resume = apbt_restart_clocksource, }; @@ -543,14 +542,7 @@ static int apbt_clocksource_register(void) if (t1 == apbt_read_clocksource(&clocksource_apbt)) panic("APBT counter not counting. APBT disabled\n"); - /* - * initialize and register APBT clocksource - * convert that to ns/clock cycle - * mult = (ns/c) * 2^APBT_SHIFT - */ - clocksource_apbt.mult = div_sc(MSEC_PER_SEC, - (unsigned long) apbt_freq, APBT_SHIFT); - clocksource_register(&clocksource_apbt); + clocksource_register_khz(&clocksource_apbt, (u32)apbt_freq*1000); return 0; } diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 73fb469908c6..3d2661ca6542 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -30,6 +30,22 @@ #include <asm/amd_nb.h> #include <asm/x86_init.h> +/* + * Using 512M as goal, in case kexec will load kernel_big + * that will do the on-position decompress, and could overlap with + * with the gart aperture that is used. + * Sequence: + * kernel_small + * ==> kexec (with kdump trigger path or gart still enabled) + * ==> kernel_small (gart area become e820_reserved) + * ==> kexec (with kdump trigger path or gart still enabled) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * So don't use 512M below as gart iommu, leave the space for kernel + * code for safe. + */ +#define GART_MIN_ADDR (512ULL << 20) +#define GART_MAX_ADDR (1ULL << 32) + int gart_iommu_aperture; int gart_iommu_aperture_disabled __initdata; int gart_iommu_aperture_allowed __initdata; @@ -70,21 +86,9 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - /* - * using 512M as goal, in case kexec will load kernel_big - * that will do the on position decompress, and could overlap with - * that position with gart that is used. - * sequende: - * kernel_small - * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) - * ==> kernel_small(gart area become e820_reserved) - * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) - * ==> kerne_big (uncompressed size will be big than 64M or 128M) - * so don't use 512M below as gart iommu, leave the space for kernel - * code for safe - */ - addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20); - if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) { + addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR, + aper_size, aper_size); + if (addr == MEMBLOCK_ERROR || addr + aper_size > GART_MAX_ADDR) { printk(KERN_ERR "Cannot allocate aperture memory hole (%lx,%uK)\n", addr, aper_size>>10); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index fabf01eff771..f92a8e5d1e21 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -505,7 +505,7 @@ static void __cpuinit setup_APIC_timer(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); - if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) { + if (this_cpu_has(X86_FEATURE_ARAT)) { lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP; /* Make LAPIC timer preferrable over percpu HPET */ lapic_clockevent.rating = 150; @@ -1237,6 +1237,17 @@ void __cpuinit setup_local_APIC(void) /* always use the value from LDR */ early_per_cpu(x86_cpu_to_logical_apicid, cpu) = logical_smp_processor_id(); + + /* + * Some NUMA implementations (NUMAQ) don't initialize apicid to + * node mapping during NUMA init. Now that logical apicid is + * guaranteed to be known, give it another chance. This is already + * a bit too late - percpu allocation has already happened without + * proper NUMA affinity. + */ + if (apic->x86_32_numa_cpu_node) + set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu), + apic->x86_32_numa_cpu_node(cpu)); #endif /* @@ -1812,30 +1823,41 @@ void smp_spurious_interrupt(struct pt_regs *regs) */ void smp_error_interrupt(struct pt_regs *regs) { - u32 v, v1; + u32 v0, v1; + u32 i = 0; + static const char * const error_interrupt_reason[] = { + "Send CS error", /* APIC Error Bit 0 */ + "Receive CS error", /* APIC Error Bit 1 */ + "Send accept error", /* APIC Error Bit 2 */ + "Receive accept error", /* APIC Error Bit 3 */ + "Redirectable IPI", /* APIC Error Bit 4 */ + "Send illegal vector", /* APIC Error Bit 5 */ + "Received illegal vector", /* APIC Error Bit 6 */ + "Illegal register address", /* APIC Error Bit 7 */ + }; exit_idle(); irq_enter(); /* First tickle the hardware, only then report what went on. -- REW */ - v = apic_read(APIC_ESR); + v0 = apic_read(APIC_ESR); apic_write(APIC_ESR, 0); v1 = apic_read(APIC_ESR); ack_APIC_irq(); atomic_inc(&irq_err_count); - /* - * Here is what the APIC error bits mean: - * 0: Send CS error - * 1: Receive CS error - * 2: Send accept error - * 3: Receive accept error - * 4: Reserved - * 5: Send illegal vector - * 6: Received illegal vector - * 7: Illegal register address - */ - pr_debug("APIC error on CPU%d: %02x(%02x)\n", - smp_processor_id(), v , v1); + apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)", + smp_processor_id(), v0 , v1); + + v1 = v1 & 0xff; + while (v1) { + if (v1 & 0x1) + apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]); + i++; + v1 >>= 1; + }; + + apic_printk(APIC_DEBUG, KERN_CONT "\n"); + irq_exit(); } @@ -2003,21 +2025,6 @@ void default_init_apic_ldr(void) apic_write(APIC_LDR, val); } -#ifdef CONFIG_X86_32 -int default_x86_32_numa_cpu_node(int cpu) -{ -#ifdef CONFIG_NUMA - int apicid = early_per_cpu(x86_cpu_to_apicid, cpu); - - if (apicid != BAD_APICID) - return __apicid_to_node[apicid]; - return NUMA_NO_NODE; -#else - return 0; -#endif -} -#endif - /* * Power management */ diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index f1baa2dc087a..775b82bc655c 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -119,14 +119,6 @@ static void noop_apic_write(u32 reg, u32 v) WARN_ON_ONCE(cpu_has_apic && !disable_apic); } -#ifdef CONFIG_X86_32 -static int noop_x86_32_numa_cpu_node(int cpu) -{ - /* we're always on node 0 */ - return 0; -} -#endif - struct apic apic_noop = { .name = "noop", .probe = noop_probe, @@ -195,6 +187,5 @@ struct apic apic_noop = { #ifdef CONFIG_X86_32 .x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node, #endif }; diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 541a2e431659..d84ac5a584b5 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -253,5 +253,4 @@ struct apic apic_bigsmp = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = bigsmp_early_logical_apicid, - .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 3e9de4854c5b..70533de5bd29 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -510,11 +510,6 @@ static void es7000_setup_apic_routing(void) nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); } -static int es7000_numa_cpu_node(int cpu) -{ - return 0; -} - static int es7000_cpu_present_to_apicid(int mps_cpu) { if (!mps_cpu) @@ -688,7 +683,6 @@ struct apic __refdata apic_es7000_cluster = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = es7000_early_logical_apicid, - .x86_32_numa_cpu_node = es7000_numa_cpu_node, }; struct apic __refdata apic_es7000 = { @@ -752,5 +746,4 @@ struct apic __refdata apic_es7000 = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = es7000_early_logical_apicid, - .x86_32_numa_cpu_node = es7000_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 68df09bba92e..45fd33d1fd3a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -128,8 +128,8 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr); +static int io_apic_setup_irq_pin(unsigned int irq, int node, + struct io_apic_irq_attr *attr); /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) @@ -3570,7 +3570,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) } #endif /* CONFIG_HT_IRQ */ -int +static int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) { struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); @@ -3585,8 +3585,8 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return ret; } -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr) +int io_apic_setup_irq_pin_once(unsigned int irq, int node, + struct io_apic_irq_attr *attr) { unsigned int id = attr->ioapic, pin = attr->ioapic_pin; int ret; diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 6273eee5134b..30f13319e24b 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -48,8 +48,6 @@ #include <asm/e820.h> #include <asm/ipi.h> -#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) - int found_numaq; /* @@ -79,31 +77,20 @@ int quad_local_to_mp_bus_id[NR_CPUS/4][4]; static inline void numaq_register_node(int node, struct sys_cfg_data *scd) { struct eachquadmem *eq = scd->eq + node; + u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20; + u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20; + int ret; - node_set_online(node); - - /* Convert to pages */ - node_start_pfn[node] = - MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size); - - node_end_pfn[node] = - MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size); - - memblock_x86_register_active_regions(node, node_start_pfn[node], - node_end_pfn[node]); - - memory_present(node, node_start_pfn[node], node_end_pfn[node]); - - node_remap_size[node] = node_memmap_size_bytes(node, - node_start_pfn[node], - node_end_pfn[node]); + node_set(node, numa_nodes_parsed); + ret = numa_add_memblk(node, start, end); + BUG_ON(ret < 0); } /* * Function: smp_dump_qct() * * Description: gets memory layout from the quad config table. This - * function also updates node_online_map with the nodes (quads) present. + * function also updates numa_nodes_parsed with the nodes (quads) present. */ static void __init smp_dump_qct(void) { @@ -112,7 +99,6 @@ static void __init smp_dump_qct(void) scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR); - nodes_clear(node_online_map); for_each_node(node) { if (scd->quads_present31_0 & (1 << node)) numaq_register_node(node, scd); @@ -282,14 +268,14 @@ static __init void early_check_numaq(void) } } -int __init get_memcfg_numaq(void) +int __init numaq_numa_init(void) { early_check_numaq(); if (!found_numaq) - return 0; + return -ENOENT; smp_dump_qct(); - return 1; + return 0; } #define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER) diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index fc84c7b61108..6541e471fd91 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -172,7 +172,6 @@ struct apic apic_default = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = default_x86_32_early_logical_apicid, - .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; extern struct apic apic_numaq; diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index e4b8059b414a..35bcd7d995a1 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -551,5 +551,4 @@ struct apic apic_summit = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, .x86_32_early_logical_apicid = summit_early_logical_apicid, - .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, }; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 33b10a0fc095..7acd2d2ac965 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -37,6 +37,13 @@ #include <asm/smp.h> #include <asm/x86_init.h> #include <asm/emergency-restart.h> +#include <asm/nmi.h> + +/* BMC sets a bit this MMR non-zero before sending an NMI */ +#define UVH_NMI_MMR UVH_SCRATCH5 +#define UVH_NMI_MMR_CLEAR (UVH_NMI_MMR + 8) +#define UV_NMI_PENDING_MASK (1UL << 63) +DEFINE_PER_CPU(unsigned long, cpu_last_nmi_count); DEFINE_PER_CPU(int, x2apic_extra_bits); @@ -642,18 +649,46 @@ void __cpuinit uv_cpu_init(void) */ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) { + unsigned long real_uv_nmi; + int bid; + if (reason != DIE_NMIUNKNOWN) return NOTIFY_OK; if (in_crash_kexec) /* do nothing if entering the crash kernel */ return NOTIFY_OK; + /* - * Use a lock so only one cpu prints at a time - * to prevent intermixed output. + * Each blade has an MMR that indicates when an NMI has been sent + * to cpus on the blade. If an NMI is detected, atomically + * clear the MMR and update a per-blade NMI count used to + * cause each cpu on the blade to notice a new NMI. + */ + bid = uv_numa_blade_id(); + real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK); + + if (unlikely(real_uv_nmi)) { + spin_lock(&uv_blade_info[bid].nmi_lock); + real_uv_nmi = (uv_read_local_mmr(UVH_NMI_MMR) & UV_NMI_PENDING_MASK); + if (real_uv_nmi) { + uv_blade_info[bid].nmi_count++; + uv_write_local_mmr(UVH_NMI_MMR_CLEAR, UV_NMI_PENDING_MASK); + } + spin_unlock(&uv_blade_info[bid].nmi_lock); + } + + if (likely(__get_cpu_var(cpu_last_nmi_count) == uv_blade_info[bid].nmi_count)) + return NOTIFY_DONE; + + __get_cpu_var(cpu_last_nmi_count) = uv_blade_info[bid].nmi_count; + + /* + * Use a lock so only one cpu prints at a time. + * This prevents intermixed output. */ spin_lock(&uv_nmi_lock); - pr_info("NMI stack dump cpu %u:\n", smp_processor_id()); + pr_info("UV NMI stack dump cpu %u:\n", smp_processor_id()); dump_stack(); spin_unlock(&uv_nmi_lock); @@ -661,7 +696,8 @@ int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data) } static struct notifier_block uv_dump_stack_nmi_nb = { - .notifier_call = uv_handle_nmi + .notifier_call = uv_handle_nmi, + .priority = NMI_LOCAL_LOW_PRIOR - 1, }; void uv_register_nmi_notifier(void) @@ -720,8 +756,9 @@ void __init uv_system_init(void) printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); - uv_blade_info = kmalloc(bytes, GFP_KERNEL); + uv_blade_info = kzalloc(bytes, GFP_KERNEL); BUG_ON(!uv_blade_info); + for (blade = 0; blade < uv_num_possible_blades(); blade++) uv_blade_info[blade].memory_nid = -1; @@ -747,6 +784,7 @@ void __init uv_system_init(void) uv_blade_info[blade].pnode = pnode; uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + spin_lock_init(&uv_blade_info[blade].nmi_lock); max_pnode = max(pnode, max_pnode); blade++; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index adee12e0da1f..3bfa02235965 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1238,7 +1238,6 @@ static int suspend(int vetoable) dpm_suspend_noirq(PMSG_SUSPEND); local_irq_disable(); - sysdev_suspend(PMSG_SUSPEND); syscore_suspend(); local_irq_enable(); @@ -1258,7 +1257,6 @@ static int suspend(int vetoable) err = (err == APM_SUCCESS) ? 0 : -EIO; syscore_resume(); - sysdev_resume(); local_irq_enable(); dpm_resume_noirq(PMSG_RESUME); @@ -1282,7 +1280,6 @@ static void standby(void) dpm_suspend_noirq(PMSG_SUSPEND); local_irq_disable(); - sysdev_suspend(PMSG_SUSPEND); syscore_suspend(); local_irq_enable(); @@ -1292,7 +1289,6 @@ static void standby(void) local_irq_disable(); syscore_resume(); - sysdev_resume(); local_irq_enable(); dpm_resume_noirq(PMSG_RESUME); diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 3f0ebe429a01..6042981d0309 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_X86_MCE) += mcheck/ obj-$(CONFIG_MTRR) += mtrr/ -obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 3532d3bf8105..8f5cabb3c5b0 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -613,7 +613,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #endif /* As a rule processors have APIC timer running in deep C states */ - if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400)) + if (c->x86 > 0xf && !cpu_has_amd_erratum(amd_erratum_400)) set_cpu_cap(c, X86_FEATURE_ARAT); /* @@ -629,10 +629,13 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012 */ u64 mask; + int err; - rdmsrl(MSR_AMD64_MCx_MASK(4), mask); - mask |= (1 << 10); - wrmsrl(MSR_AMD64_MCx_MASK(4), mask); + err = rdmsrl_safe(MSR_AMD64_MCx_MASK(4), &mask); + if (err == 0) { + mask |= (1 << 10); + checking_wrmsrl(MSR_AMD64_MCx_MASK(4), mask); + } } } diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index e2ced0074a45..c8b41623377f 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -254,6 +254,25 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) } #endif +static int disable_smep __cpuinitdata; +static __init int setup_disable_smep(char *arg) +{ + disable_smep = 1; + return 1; +} +__setup("nosmep", setup_disable_smep); + +static __cpuinit void setup_smep(struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_SMEP)) { + if (unlikely(disable_smep)) { + setup_clear_cpu_cap(X86_FEATURE_SMEP); + clear_in_cr4(X86_CR4_SMEP); + } else + set_in_cr4(X86_CR4_SMEP); + } +} + /* * Some CPU features depend on higher CPUID levels, which may not always * be available due to CPUID level capping or broken virtualization @@ -565,8 +584,7 @@ void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx); - if (eax > 0) - c->x86_capability[9] = ebx; + c->x86_capability[9] = ebx; } /* AMD-defined flags: level 0x80000001 */ @@ -668,6 +686,8 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c) c->cpu_index = 0; #endif filter_cpuid_features(c, false); + + setup_smep(c); } void __init early_cpu_init(void) @@ -753,6 +773,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c) #endif } + setup_smep(c); + get_model_name(c); /* Default name */ detect_nopl(c); diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig deleted file mode 100644 index 870e6cc6ad28..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ /dev/null @@ -1,266 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_PCC_CPUFREQ - tristate "Processor Clocking Control interface driver" - depends on ACPI && ACPI_PROCESSOR - help - This driver adds support for the PCC interface. - - For details, take a look at: - <file:Documentation/cpu-freq/pcc-cpufreq.txt>. - - To compile this driver as a module, choose M here: the - module will be called pcc-cpufreq. - - If in doubt, say N. - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - To compile this driver as a module, choose M here: the - module will be called acpi-cpufreq. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config ELAN_CPUFREQ - tristate "AMD Elan SC400 and SC410" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC400 and SC410 - processors. - - You need to specify the processor maximum speed as boot - parameter: elanfreq=maxspeed (in kHz) or as module - parameter "max_freq". - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config SC520_CPUFREQ - tristate "AMD Elan SC520" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC520 processor. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - - -config X86_POWERNOW_K6 - tristate "AMD Mobile K6-2/K6-3 PowerNow!" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for mobile AMD K6-2+ and mobile - AMD K6-3+ processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7 - tristate "AMD Mobile Athlon/Duron PowerNow!" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for mobile AMD K7 mobile processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7_ACPI - bool - depends on X86_POWERNOW_K7 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) - depends on X86_32 - default y - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - depends on ACPI && ACPI_PROCESSOR - help - This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. - - To compile this driver as a module, choose M here: the - module will be called powernow-k8. - - For details, take a look at <file:Documentation/cpu-freq/>. - -config X86_GX_SUSPMOD - tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on X86_32 && PCI - help - This add the CPUFreq driver for NatSemi Geode processors which - support suspend modulation. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 - depends on X86_32 || (X86_64 && ACPI_PROCESSOR) - help - This is deprecated and this functionality is now merged into - acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of - speedstep_centrino. - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs - or 64bit enabled Intel Xeons. - - To compile this driver as a module, choose M here: the - module will be called speedstep-centrino. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO_TABLE - bool "Built-in tables for Banias CPUs" - depends on X86_32 && X86_SPEEDSTEP_CENTRINO - default y - help - Use built-in tables for Banias CPUs if ACPI encoding - is not available. - - If in doubt, say N. - -config X86_SPEEDSTEP_ICH - tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" - select CPU_FREQ_TABLE - depends on X86_32 - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, - ICH3 or ICH4 southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_SMI - tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" - select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) - on systems which have an Intel 440BX/ZX/MX southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. When enabled it will lower CPU temperature by skipping - clocks. - - This driver should be only used in exceptional - circumstances when very low power is needed because it causes severe - slowdowns and noticeable latencies. Normally Speedstep should be used - instead. - - To compile this driver as a module, choose M here: the - module will be called p4-clockmod. - - For details, take a look at <file:Documentation/cpu-freq/>. - - Unless you are absolutely sure say N. - -config X86_CPUFREQ_NFORCE2 - tristate "nVidia nForce2 FSB changing" - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for FSB changing on nVidia nForce2 - platforms. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGRUN - tristate "Transmeta LongRun" - depends on X86_32 - help - This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors - which support LongRun. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGHAUL - tristate "VIA Cyrix III Longhaul" - select CPU_FREQ_TABLE - depends on X86_32 && ACPI_PROCESSOR - help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T - processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" - select CPU_FREQ_TABLE - depends on X86_32 && EXPERIMENTAL - help - This adds the CPUFreq driver for VIA C7 processors. However, this driver - does not have any safeguards to prevent operating the CPU out of spec - and is thus considered dangerous. Please use the regular ACPI cpufreq - driver, enabled by CONFIG_X86_ACPI_CPUFREQ. - - If in doubt, say N. - -comment "shared options" - -config X86_SPEEDSTEP_LIB - tristate - default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD) - -config X86_SPEEDSTEP_RELAXED_CAP_CHECK - bool "Relaxed speedstep capability checks" - depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) - help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This - option lets the probing code bypass some of those checks if the - parameter "relaxed_check=1" is passed to the module. - -endif # CPU_FREQ - -endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile deleted file mode 100644 index bd54bf67e6fb..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Link order matters. K8 is preferred to ACPI because of firmware bugs in early -# K8 systems. ACPI is preferred to all other hardware-specific drivers. -# speedstep-* is preferred over p4-clockmod. - -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o mperf.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o mperf.o -obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o -obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o -obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_LONGHAUL) += longhaul.o -obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o -obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o -obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o -obj-$(CONFIG_X86_LONGRUN) += longrun.o -obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o -obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o -obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o -obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o -obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o -obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c deleted file mode 100644 index a2baafb2fe6d..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ /dev/null @@ -1,776 +0,0 @@ -/* - * acpi-cpufreq.c - ACPI Processor P-States Driver - * - * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> - * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> - * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> - * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/dmi.h> -#include <linux/slab.h> - -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/uaccess.h> - -#include <acpi/processor.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> -#include "mperf.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "acpi-cpufreq", msg) - -MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); -MODULE_DESCRIPTION("ACPI Processor P-States Driver"); -MODULE_LICENSE("GPL"); - -enum { - UNDEFINED_CAPABLE = 0, - SYSTEM_INTEL_MSR_CAPABLE, - SYSTEM_IO_CAPABLE, -}; - -#define INTEL_MSR_RANGE (0xffff) - -struct acpi_cpufreq_data { - struct acpi_processor_performance *acpi_data; - struct cpufreq_frequency_table *freq_table; - unsigned int resume; - unsigned int cpu_feature; -}; - -static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); - -/* acpi_perf_data is a pointer to percpu data. */ -static struct acpi_processor_performance __percpu *acpi_perf_data; - -static struct cpufreq_driver acpi_cpufreq_driver; - -static unsigned int acpi_pstate_strict; - -static int check_est_cpu(unsigned int cpuid) -{ - struct cpuinfo_x86 *cpu = &cpu_data(cpuid); - - return cpu_has(cpu, X86_FEATURE_EST); -} - -static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) -{ - struct acpi_processor_performance *perf; - int i; - - perf = data->acpi_data; - - for (i = 0; i < perf->state_count; i++) { - if (value == perf->states[i].status) - return data->freq_table[i].frequency; - } - return 0; -} - -static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) -{ - int i; - struct acpi_processor_performance *perf; - - msr &= INTEL_MSR_RANGE; - perf = data->acpi_data; - - for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) - return data->freq_table[i].frequency; - } - return data->freq_table[0].frequency; -} - -static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) -{ - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - return extract_msr(val, data); - case SYSTEM_IO_CAPABLE: - return extract_io(val, data); - default: - return 0; - } -} - -struct msr_addr { - u32 reg; -}; - -struct io_addr { - u16 port; - u8 bit_width; -}; - -struct drv_cmd { - unsigned int type; - const struct cpumask *mask; - union { - struct msr_addr msr; - struct io_addr io; - } addr; - u32 val; -}; - -/* Called via smp_call_function_single(), on the target CPU */ -static void do_drv_read(void *_cmd) -{ - struct drv_cmd *cmd = _cmd; - u32 h; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, cmd->val, h); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_read_port((acpi_io_address)cmd->addr.io.port, - &cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -/* Called via smp_call_function_many(), on the target CPUs */ -static void do_drv_write(void *_cmd) -{ - struct drv_cmd *cmd = _cmd; - u32 lo, hi; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, lo, hi); - lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); - wrmsr(cmd->addr.msr.reg, lo, hi); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_write_port((acpi_io_address)cmd->addr.io.port, - cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -static void drv_read(struct drv_cmd *cmd) -{ - int err; - cmd->val = 0; - - err = smp_call_function_any(cmd->mask, do_drv_read, cmd, 1); - WARN_ON_ONCE(err); /* smp_call_function_any() was buggy? */ -} - -static void drv_write(struct drv_cmd *cmd) -{ - int this_cpu; - - this_cpu = get_cpu(); - if (cpumask_test_cpu(this_cpu, cmd->mask)) - do_drv_write(cmd); - smp_call_function_many(cmd->mask, do_drv_write, cmd, 1); - put_cpu(); -} - -static u32 get_cur_val(const struct cpumask *mask) -{ - struct acpi_processor_performance *perf; - struct drv_cmd cmd; - - if (unlikely(cpumask_empty(mask))) - return 0; - - switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - break; - default: - return 0; - } - - cmd.mask = mask; - drv_read(&cmd); - - dprintk("get_cur_val = %u\n", cmd.val); - - return cmd.val; -} - -static unsigned int get_cur_freq_on_cpu(unsigned int cpu) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu); - unsigned int freq; - unsigned int cached_freq; - - dprintk("get_cur_freq_on_cpu (%d)\n", cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return 0; - } - - cached_freq = data->freq_table[data->acpi_data->state].frequency; - freq = extract_freq(get_cur_val(cpumask_of(cpu)), data); - if (freq != cached_freq) { - /* - * The dreaded BIOS frequency change behind our back. - * Force set the frequency on next target call. - */ - data->resume = 1; - } - - dprintk("cur freq = %u\n", freq); - - return freq; -} - -static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, - struct acpi_cpufreq_data *data) -{ - unsigned int cur_freq; - unsigned int i; - - for (i = 0; i < 100; i++) { - cur_freq = extract_freq(get_cur_val(mask), data); - if (cur_freq == freq) - return 1; - udelay(10); - } - return 0; -} - -static int acpi_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - struct acpi_processor_performance *perf; - struct cpufreq_freqs freqs; - struct drv_cmd cmd; - unsigned int next_state = 0; /* Index into freq_table */ - unsigned int next_perf_state = 0; /* Index into perf table */ - unsigned int i; - int result = 0; - - dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return -ENODEV; - } - - perf = data->acpi_data; - result = cpufreq_frequency_table_target(policy, - data->freq_table, - target_freq, - relation, &next_state); - if (unlikely(result)) { - result = -ENODEV; - goto out; - } - - next_perf_state = data->freq_table[next_state].index; - if (perf->state == next_perf_state) { - if (unlikely(data->resume)) { - dprintk("Called after resume, resetting to P%d\n", - next_perf_state); - data->resume = 0; - } else { - dprintk("Already at target state (P%d)\n", - next_perf_state); - goto out; - } - } - - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_CTL; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - default: - result = -ENODEV; - goto out; - } - - /* cpufreq holds the hotplug lock, so we are safe from here on */ - if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) - cmd.mask = policy->cpus; - else - cmd.mask = cpumask_of(policy->cpu); - - freqs.old = perf->states[perf->state].core_frequency * 1000; - freqs.new = data->freq_table[next_state].frequency; - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - drv_write(&cmd); - - if (acpi_pstate_strict) { - if (!check_freqs(cmd.mask, freqs.new, data)) { - dprintk("acpi_cpufreq_target failed (%d)\n", - policy->cpu); - result = -EAGAIN; - goto out; - } - } - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - perf->state = next_perf_state; - -out: - return result; -} - -static int acpi_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_verify\n"); - - return cpufreq_frequency_table_verify(policy, data->freq_table); -} - -static unsigned long -acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) -{ - struct acpi_processor_performance *perf = data->acpi_data; - - if (cpu_khz) { - /* search the closest match to cpu_khz */ - unsigned int i; - unsigned long freq; - unsigned long freqn = perf->states[0].core_frequency * 1000; - - for (i = 0; i < (perf->state_count-1); i++) { - freq = freqn; - freqn = perf->states[i+1].core_frequency * 1000; - if ((2 * cpu_khz) > (freqn + freq)) { - perf->state = i; - return freq; - } - } - perf->state = perf->state_count-1; - return freqn; - } else { - /* assume CPU is at P0... */ - perf->state = 0; - return perf->states[0].core_frequency * 1000; - } -} - -static void free_acpi_perf_data(void) -{ - unsigned int i; - - /* Freeing a NULL pointer is OK, and alloc_percpu zeroes. */ - for_each_possible_cpu(i) - free_cpumask_var(per_cpu_ptr(acpi_perf_data, i) - ->shared_cpu_map); - free_percpu(acpi_perf_data); -} - -/* - * acpi_cpufreq_early_init - initialize ACPI P-States library - * - * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) - * in order to determine correct frequency and voltage pairings. We can - * do _PDC and _PSD and find out the processor dependency for the - * actual init that will happen later... - */ -static int __init acpi_cpufreq_early_init(void) -{ - unsigned int i; - dprintk("acpi_cpufreq_early_init\n"); - - acpi_perf_data = alloc_percpu(struct acpi_processor_performance); - if (!acpi_perf_data) { - dprintk("Memory allocation error for acpi_perf_data.\n"); - return -ENOMEM; - } - for_each_possible_cpu(i) { - if (!zalloc_cpumask_var_node( - &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, - GFP_KERNEL, cpu_to_node(i))) { - - /* Freeing a NULL pointer is OK: alloc_percpu zeroes. */ - free_acpi_perf_data(); - return -ENOMEM; - } - } - - /* Do initialization in ACPI core */ - acpi_processor_preregister_performance(acpi_perf_data); - return 0; -} - -#ifdef CONFIG_SMP -/* - * Some BIOSes do SW_ANY coordination internally, either set it up in hw - * or do it in BIOS firmware and won't inform about it to OS. If not - * detected, this has a side effect of making CPU run at a different speed - * than OS intended it to run at. Detect it and handle it cleanly. - */ -static int bios_with_sw_any_bug; - -static int sw_any_bug_found(const struct dmi_system_id *d) -{ - bios_with_sw_any_bug = 1; - return 0; -} - -static const struct dmi_system_id sw_any_bug_dmi_table[] = { - { - .callback = sw_any_bug_found, - .ident = "Supermicro Server X6DLP", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_BIOS_VERSION, "080010"), - DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), - }, - }, - { } -}; - -static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) -{ - /* Intel Xeon Processor 7100 Series Specification Update - * http://www.intel.com/Assets/PDF/specupdate/314554.pdf - * AL30: A Machine Check Exception (MCE) Occurring during an - * Enhanced Intel SpeedStep Technology Ratio Change May Cause - * Both Processor Cores to Lock Up. */ - if (c->x86_vendor == X86_VENDOR_INTEL) { - if ((c->x86 == 15) && - (c->x86_model == 6) && - (c->x86_mask == 8)) { - printk(KERN_INFO "acpi-cpufreq: Intel(R) " - "Xeon(R) 7100 Errata AL30, processors may " - "lock up on frequency changes: disabling " - "acpi-cpufreq.\n"); - return -ENODEV; - } - } - return 0; -} -#endif - -static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - unsigned int valid_states = 0; - unsigned int cpu = policy->cpu; - struct acpi_cpufreq_data *data; - unsigned int result = 0; - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - struct acpi_processor_performance *perf; -#ifdef CONFIG_SMP - static int blacklisted; -#endif - - dprintk("acpi_cpufreq_cpu_init\n"); - -#ifdef CONFIG_SMP - if (blacklisted) - return blacklisted; - blacklisted = acpi_cpufreq_blacklist(c); - if (blacklisted) - return blacklisted; -#endif - - data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); - per_cpu(acfreq_data, cpu) = data; - - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) - acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; - - result = acpi_processor_register_performance(data->acpi_data, cpu); - if (result) - goto err_free; - - perf = data->acpi_data; - policy->shared_type = perf->shared_type; - - /* - * Will let policy->cpus know about dependency only when software - * coordination is required. - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || - policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - cpumask_copy(policy->cpus, perf->shared_cpu_map); - } - cpumask_copy(policy->related_cpus, perf->shared_cpu_map); - -#ifdef CONFIG_SMP - dmi_check_system(sw_any_bug_dmi_table); - if (bios_with_sw_any_bug && cpumask_weight(policy->cpus) == 1) { - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - cpumask_copy(policy->cpus, cpu_core_mask(cpu)); - } -#endif - - /* capability check */ - if (perf->state_count <= 1) { - dprintk("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if (perf->control_register.space_id != perf->status_register.space_id) { - result = -ENODEV; - goto err_unreg; - } - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - dprintk("SYSTEM IO addr space\n"); - data->cpu_feature = SYSTEM_IO_CAPABLE; - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - dprintk("HARDWARE addr space\n"); - if (!check_est_cpu(cpu)) { - result = -ENODEV; - goto err_unreg; - } - data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; - break; - default: - dprintk("Unknown addr space %d\n", - (u32) (perf->control_register.space_id)); - result = -ENODEV; - goto err_unreg; - } - - data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * - (perf->state_count+1), GFP_KERNEL); - if (!data->freq_table) { - result = -ENOMEM; - goto err_unreg; - } - - /* detect transition latency */ - policy->cpuinfo.transition_latency = 0; - for (i = 0; i < perf->state_count; i++) { - if ((perf->states[i].transition_latency * 1000) > - policy->cpuinfo.transition_latency) - policy->cpuinfo.transition_latency = - perf->states[i].transition_latency * 1000; - } - - /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ - if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && - policy->cpuinfo.transition_latency > 20 * 1000) { - policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO - "P-state transition latency capped at 20 uS\n"); - } - - /* table init */ - for (i = 0; i < perf->state_count; i++) { - if (i > 0 && perf->states[i].core_frequency >= - data->freq_table[valid_states-1].frequency / 1000) - continue; - - data->freq_table[valid_states].index = i; - data->freq_table[valid_states].frequency = - perf->states[i].core_frequency * 1000; - valid_states++; - } - data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; - perf->state = 0; - - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); - if (result) - goto err_freqfree; - - if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) - printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - /* Current speed is unknown and not detectable by IO port */ - policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - acpi_cpufreq_driver.get = get_cur_freq_on_cpu; - policy->cur = get_cur_freq_on_cpu(cpu); - break; - default: - break; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf; - - dprintk("CPU%u - ACPI performance management activated.\n", cpu); - for (i = 0; i < perf->state_count; i++) - dprintk(" %cP%d: %d MHz, %d mW, %d uS\n", - (i == perf->state ? '*' : ' '), i, - (u32) perf->states[i].core_frequency, - (u32) perf->states[i].power, - (u32) perf->states[i].transition_latency); - - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - - /* - * the first call to ->target() should result in us actually - * writing something to the appropriate registers. - */ - data->resume = 1; - - return result; - -err_freqfree: - kfree(data->freq_table); -err_unreg: - acpi_processor_unregister_performance(perf, cpu); -err_free: - kfree(data); - per_cpu(acfreq_data, cpu) = NULL; - - return result; -} - -static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_cpu_exit\n"); - - if (data) { - cpufreq_frequency_table_put_attr(policy->cpu); - per_cpu(acfreq_data, policy->cpu) = NULL; - acpi_processor_unregister_performance(data->acpi_data, - policy->cpu); - kfree(data->freq_table); - kfree(data); - } - - return 0; -} - -static int acpi_cpufreq_resume(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - dprintk("acpi_cpufreq_resume\n"); - - data->resume = 1; - - return 0; -} - -static struct freq_attr *acpi_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .bios_limit = acpi_processor_get_bios_limit, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .resume = acpi_cpufreq_resume, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, -}; - -static int __init acpi_cpufreq_init(void) -{ - int ret; - - if (acpi_disabled) - return 0; - - dprintk("acpi_cpufreq_init\n"); - - ret = acpi_cpufreq_early_init(); - if (ret) - return ret; - - ret = cpufreq_register_driver(&acpi_cpufreq_driver); - if (ret) - free_acpi_perf_data(); - - return ret; -} - -static void __exit acpi_cpufreq_exit(void) -{ - dprintk("acpi_cpufreq_exit\n"); - - cpufreq_unregister_driver(&acpi_cpufreq_driver); - - free_percpu(acpi_perf_data); -} - -module_param(acpi_pstate_strict, uint, 0644); -MODULE_PARM_DESC(acpi_pstate_strict, - "value 0 or non-zero. non-zero -> strict ACPI checks are " - "performed during frequency changes."); - -late_initcall(acpi_cpufreq_init); -module_exit(acpi_cpufreq_exit); - -MODULE_ALIAS("acpi"); diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c deleted file mode 100644 index 141abebc4516..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/delay.h> - -#define NFORCE2_XTAL 25 -#define NFORCE2_BOOTFSB 0x48 -#define NFORCE2_PLLENABLE 0xa8 -#define NFORCE2_PLLREG 0xa4 -#define NFORCE2_PLLADR 0xa0 -#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) - -#define NFORCE2_MIN_FSB 50 -#define NFORCE2_SAFE_DISTANCE 50 - -/* Delay in ms between FSB changes */ -/* #define NFORCE2_DELAY 10 */ - -/* - * nforce2_chipset: - * FSB is changed using the chipset - */ -static struct pci_dev *nforce2_dev; - -/* fid: - * multiplier * 10 - */ -static int fid; - -/* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) - */ -static int min_fsb; -static int max_fsb; - -MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); -MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); -MODULE_LICENSE("GPL"); - -module_param(fid, int, 0444); -module_param(min_fsb, int, 0444); - -MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); -MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); - -#define PFX "cpufreq-nforce2: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "cpufreq-nforce2", msg) - -/** - * nforce2_calc_fsb - calculate FSB - * @pll: PLL value - * - * Calculates FSB from PLL value - */ -static int nforce2_calc_fsb(int pll) -{ - unsigned char mul, div; - - mul = (pll >> 8) & 0xff; - div = pll & 0xff; - - if (div > 0) - return NFORCE2_XTAL * mul / div; - - return 0; -} - -/** - * nforce2_calc_pll - calculate PLL value - * @fsb: FSB - * - * Calculate PLL value for given FSB - */ -static int nforce2_calc_pll(unsigned int fsb) -{ - unsigned char xmul, xdiv; - unsigned char mul = 0, div = 0; - int tried = 0; - - /* Try to calculate multiplier and divider up to 4 times */ - while (((mul == 0) || (div == 0)) && (tried <= 3)) { - for (xdiv = 2; xdiv <= 0x80; xdiv++) - for (xmul = 1; xmul <= 0xfe; xmul++) - if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == - fsb + tried) { - mul = xmul; - div = xdiv; - } - tried++; - } - - if ((mul == 0) || (div == 0)) - return -1; - - return NFORCE2_PLL(mul, div); -} - -/** - * nforce2_write_pll - write PLL value to chipset - * @pll: PLL value - * - * Writes new FSB PLL value to chipset - */ -static void nforce2_write_pll(int pll) -{ - int temp; - - /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); - - /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); - - return; -} - -/** - * nforce2_fsb_read - Read FSB - * - * Read FSB from chipset - * If bootfsb != 0, return FSB at boot-time - */ -static unsigned int nforce2_fsb_read(int bootfsb) -{ - struct pci_dev *nforce2_sub5; - u32 fsb, temp = 0; - - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, - PCI_ANY_ID, PCI_ANY_ID, NULL); - if (!nforce2_sub5) - return 0; - - pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); - fsb /= 1000000; - - /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - - if (bootfsb || !temp) - return fsb; - - /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); - fsb = nforce2_calc_fsb(temp); - - return fsb; -} - -/** - * nforce2_set_fsb - set new FSB - * @fsb: New FSB - * - * Sets new FSB - */ -static int nforce2_set_fsb(unsigned int fsb) -{ - u32 temp = 0; - unsigned int tfsb; - int diff; - int pll = 0; - - if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); - return -EINVAL; - } - - tfsb = nforce2_fsb_read(0); - if (!tfsb) { - printk(KERN_ERR PFX "Error while reading the FSB\n"); - return -EINVAL; - } - - /* First write? Then set actual value */ - pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if (!temp) { - pll = nforce2_calc_pll(tfsb); - - if (pll < 0) - return -EINVAL; - - nforce2_write_pll(pll); - } - - /* Enable write access */ - temp = 0x01; - pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); - - diff = tfsb - fsb; - - if (!diff) - return 0; - - while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { - if (diff < 0) - tfsb++; - else - tfsb--; - - /* Calculate the PLL reg. value */ - pll = nforce2_calc_pll(tfsb); - if (pll == -1) - return -EINVAL; - - nforce2_write_pll(pll); -#ifdef NFORCE2_DELAY - mdelay(NFORCE2_DELAY); -#endif - } - - temp = 0x40; - pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); - - return 0; -} - -/** - * nforce2_get - get the CPU frequency - * @cpu: CPU number - * - * Returns the CPU frequency - */ -static unsigned int nforce2_get(unsigned int cpu) -{ - if (cpu) - return 0; - return nforce2_fsb_read(0) * fid * 100; -} - -/** - * nforce2_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int nforce2_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ -/* unsigned long flags; */ - struct cpufreq_freqs freqs; - unsigned int target_fsb; - - if ((target_freq > policy->max) || (target_freq < policy->min)) - return -EINVAL; - - target_fsb = target_freq / (fid * 100); - - freqs.old = nforce2_get(policy->cpu); - freqs.new = target_fsb * fid * 100; - freqs.cpu = 0; /* Only one CPU on nForce2 platforms */ - - if (freqs.old == freqs.new) - return 0; - - dprintk("Old CPU frequency %d kHz, new %d kHz\n", - freqs.old, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Disable IRQs */ - /* local_irq_save(flags); */ - - if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR PFX "Changing FSB to %d failed\n", - target_fsb); - else - dprintk("Changed FSB successfully to %d\n", - target_fsb); - - /* Enable IRQs */ - /* local_irq_restore(flags); */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -/** - * nforce2_verify - verifies a new CPUFreq policy - * @policy: new policy - */ -static int nforce2_verify(struct cpufreq_policy *policy) -{ - unsigned int fsb_pol_max; - - fsb_pol_max = policy->max / (fid * 100); - - if (policy->min < (fsb_pol_max * fid * 100)) - policy->max = (fsb_pol_max + 1) * fid * 100; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static int nforce2_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int fsb; - unsigned int rfid; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* Get current FSB */ - fsb = nforce2_fsb_read(0); - - if (!fsb) - return -EIO; - - /* FIX: Get FID from CPU */ - if (!fid) { - if (!cpu_khz) { - printk(KERN_WARNING PFX - "cpu_khz not set, can't calculate multiplier!\n"); - return -ENODEV; - } - - fid = cpu_khz / (fsb * 100); - rfid = fid % 5; - - if (rfid) { - if (rfid > 2) - fid += 5 - rfid; - else - fid -= rfid; - } - } - - printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, - fid / 10, fid % 10); - - /* Set maximum FSB to FSB at boot time */ - max_fsb = nforce2_fsb_read(1); - - if (!max_fsb) - return -EIO; - - if (!min_fsb) - min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; - - if (min_fsb < NFORCE2_MIN_FSB) - min_fsb = NFORCE2_MIN_FSB; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = min_fsb * fid * 100; - policy->cpuinfo.max_freq = max_fsb * fid * 100; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = nforce2_get(policy->cpu); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - - return 0; -} - -static int nforce2_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver nforce2_driver = { - .name = "nforce2", - .verify = nforce2_verify, - .target = nforce2_target, - .get = nforce2_get, - .init = nforce2_cpu_init, - .exit = nforce2_cpu_exit, - .owner = THIS_MODULE, -}; - -/** - * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic - * - * Detects nForce2 A2 and C1 stepping - * - */ -static int nforce2_detect_chipset(void) -{ - nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, PCI_ANY_ID, NULL); - - if (nforce2_dev == NULL) - return -ENODEV; - - printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", - nforce2_dev->revision); - printk(KERN_INFO PFX - "FSB changing is maybe unstable and can lead to " - "crashes and data loss.\n"); - - return 0; -} - -/** - * nforce2_init - initializes the nForce2 CPUFreq driver - * - * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init nforce2_init(void) -{ - /* TODO: do we need to detect the processor? */ - - /* detect chipset */ - if (nforce2_detect_chipset()) { - printk(KERN_INFO PFX "No nForce2 chipset.\n"); - return -ENODEV; - } - - return cpufreq_register_driver(&nforce2_driver); -} - -/** - * nforce2_exit - unregisters cpufreq module - * - * Unregisters nForce2 FSB change support. - */ -static void __exit nforce2_exit(void) -{ - cpufreq_unregister_driver(&nforce2_driver); -} - -module_init(nforce2_init); -module_exit(nforce2_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c deleted file mode 100644 index 35a257dd4bb7..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * Based on documentation provided by Dave Jones. Thanks! - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/msr.h> -#include <asm/tsc.h> - -#define EPS_BRAND_C7M 0 -#define EPS_BRAND_C7 1 -#define EPS_BRAND_EDEN 2 -#define EPS_BRAND_C3 3 -#define EPS_BRAND_C7D 4 - -struct eps_cpu_data { - u32 fsb; - struct cpufreq_frequency_table freq_table[]; -}; - -static struct eps_cpu_data *eps_cpu[NR_CPUS]; - - -static unsigned int eps_get(unsigned int cpu) -{ - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (cpu) - return 0; - centaur = eps_cpu[cpu]; - if (centaur == NULL) - return 0; - - /* Return current frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - return centaur->fsb * ((lo >> 8) & 0xff); -} - -static int eps_set_state(struct eps_cpu_data *centaur, - unsigned int cpu, - u32 dest_state) -{ - struct cpufreq_freqs freqs; - u32 lo, hi; - int err = 0; - int i; - - freqs.old = eps_get(cpu); - freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Wait while CPU is busy */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i = 0; - while (lo & ((1 << 16) | (1 << 17))) { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } - /* Set new multiplier and voltage */ - wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); - /* Wait until transition end */ - i = 0; - do { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } while (lo & ((1 << 16) | (1 << 17))); - - /* Return current frequency */ -postchange: - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - freqs.new = centaur->fsb * ((lo >> 8) & 0xff); - -#ifdef DEBUG - { - u8 current_multiplier, current_voltage; - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", - current_multiplier); - } -#endif - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - return err; -} - -static int eps_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct eps_cpu_data *centaur; - unsigned int newstate = 0; - unsigned int cpu = policy->cpu; - unsigned int dest_state; - int ret; - - if (unlikely(eps_cpu[cpu] == NULL)) - return -ENODEV; - centaur = eps_cpu[cpu]; - - if (unlikely(cpufreq_frequency_table_target(policy, - &eps_cpu[cpu]->freq_table[0], - target_freq, - relation, - &newstate))) { - return -EINVAL; - } - - /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; - ret = eps_set_state(centaur, cpu, dest_state); - if (ret) - printk(KERN_ERR "eps: Timeout!\n"); - return ret; -} - -static int eps_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &eps_cpu[policy->cpu]->freq_table[0]); -} - -static int eps_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - u32 lo, hi; - u64 val; - u8 current_multiplier, current_voltage; - u8 max_multiplier, max_voltage; - u8 min_multiplier, min_voltage; - u8 brand = 0; - u32 fsb; - struct eps_cpu_data *centaur; - struct cpuinfo_x86 *c = &cpu_data(0); - struct cpufreq_frequency_table *f_table; - int k, step, voltage; - int ret; - int states; - - if (policy->cpu != 0) - return -ENODEV; - - /* Check brand */ - printk(KERN_INFO "eps: Detected VIA "); - - switch (c->x86_model) { - case 10: - rdmsr(0x1153, lo, hi); - brand = (((lo >> 2) ^ lo) >> 18) & 3; - printk(KERN_CONT "Model A "); - break; - case 13: - rdmsr(0x1154, lo, hi); - brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff; - printk(KERN_CONT "Model D "); - break; - } - - switch (brand) { - case EPS_BRAND_C7M: - printk(KERN_CONT "C7-M\n"); - break; - case EPS_BRAND_C7: - printk(KERN_CONT "C7\n"); - break; - case EPS_BRAND_EDEN: - printk(KERN_CONT "Eden\n"); - break; - case EPS_BRAND_C7D: - printk(KERN_CONT "C7-D\n"); - break; - case EPS_BRAND_C3: - printk(KERN_CONT "C3\n"); - return -ENODEV; - break; - } - /* Enable Enhanced PowerSaver */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - val |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; - wrmsrl(MSR_IA32_MISC_ENABLE, val); - /* Can be locked at 0 */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n"); - return -ENODEV; - } - } - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", - current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); - - /* Print limits */ - max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", - max_voltage * 16 + 700); - max_multiplier = (hi >> 8) & 0xff; - printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); - min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", - min_voltage * 16 + 700); - min_multiplier = (hi >> 24) & 0xff; - printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); - - /* Sanity checks */ - if (current_multiplier == 0 || max_multiplier == 0 - || min_multiplier == 0) - return -EINVAL; - if (current_multiplier > max_multiplier - || max_multiplier <= min_multiplier) - return -EINVAL; - if (current_voltage > 0x1f || max_voltage > 0x1f) - return -EINVAL; - if (max_voltage < min_voltage) - return -EINVAL; - - /* Calc FSB speed */ - fsb = cpu_khz / current_multiplier; - /* Calc number of p-states supported */ - if (brand == EPS_BRAND_C7M) - states = max_multiplier - min_multiplier + 1; - else - states = 2; - - /* Allocate private data and frequency table for current cpu */ - centaur = kzalloc(sizeof(struct eps_cpu_data) - + (states + 1) * sizeof(struct cpufreq_frequency_table), - GFP_KERNEL); - if (!centaur) - return -ENOMEM; - eps_cpu[0] = centaur; - - /* Copy basic values */ - centaur->fsb = fsb; - - /* Fill frequency and MSR value table */ - f_table = ¢aur->freq_table[0]; - if (brand != EPS_BRAND_C7M) { - f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; - f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; - f_table[2].frequency = CPUFREQ_TABLE_END; - } else { - k = 0; - step = ((max_voltage - min_voltage) * 256) - / (max_multiplier - min_multiplier); - for (i = min_multiplier; i <= max_multiplier; i++) { - voltage = (k * step) / 256 + min_voltage; - f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; - k++; - } - f_table[k].frequency = CPUFREQ_TABLE_END; - } - - policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ - policy->cur = fsb * current_multiplier; - - ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); - if (ret) { - kfree(centaur); - return ret; - } - - cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); - return 0; -} - -static int eps_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (eps_cpu[cpu] == NULL) - return -ENODEV; - centaur = eps_cpu[cpu]; - - /* Get max frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - /* Set max frequency */ - eps_set_state(centaur, cpu, hi & 0xffff); - /* Bye */ - cpufreq_frequency_table_put_attr(policy->cpu); - kfree(eps_cpu[cpu]); - eps_cpu[cpu] = NULL; - return 0; -} - -static struct freq_attr *eps_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver eps_driver = { - .verify = eps_verify, - .target = eps_target, - .init = eps_cpu_init, - .exit = eps_cpu_exit, - .get = eps_get, - .name = "e_powersaver", - .owner = THIS_MODULE, - .attr = eps_attr, -}; - -static int __init eps_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - /* This driver will work only on Centaur C7 processors with - * Enhanced SpeedStep/PowerSaver registers */ - if (c->x86_vendor != X86_VENDOR_CENTAUR - || c->x86 != 6 || c->x86_model < 10) - return -ENODEV; - if (!cpu_has(c, X86_FEATURE_EST)) - return -ENODEV; - - if (cpufreq_register_driver(&eps_driver)) - return -EINVAL; - return 0; -} - -static void __exit eps_exit(void) -{ - cpufreq_unregister_driver(&eps_driver); -} - -MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); -MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); -MODULE_LICENSE("GPL"); - -module_init(eps_init); -module_exit(eps_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c deleted file mode 100644 index c587db472a75..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * elanfreq: cpufreq driver for the AMD ELAN family - * - * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> - * - * Parts of this code are (c) Sven Geggus <sven@geggus.net> - * - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <linux/timex.h> -#include <linux/io.h> - -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ -#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ - -/* Module parameter */ -static int max_freq; - -struct s_elan_multiplier { - int clock; /* frequency in kHz */ - int val40h; /* PMU Force Mode register */ - int val80h; /* CPU Clock Speed Register */ -}; - -/* - * It is important that the frequencies - * are listed in ascending order here! - */ -static struct s_elan_multiplier elan_multiplier[] = { - {1000, 0x02, 0x18}, - {2000, 0x02, 0x10}, - {4000, 0x02, 0x08}, - {8000, 0x00, 0x00}, - {16000, 0x00, 0x02}, - {33000, 0x00, 0x04}, - {66000, 0x01, 0x04}, - {99000, 0x01, 0x05} -}; - -static struct cpufreq_frequency_table elanfreq_table[] = { - {0, 1000}, - {1, 2000}, - {2, 4000}, - {3, 8000}, - {4, 16000}, - {5, 33000}, - {6, 66000}, - {7, 99000}, - {0, CPUFREQ_TABLE_END}, -}; - - -/** - * elanfreq_get_cpu_frequency: determine current cpu speed - * - * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated - * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. - */ - -static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg; /* Clock Speed Register */ - - local_irq_disable(); - outb_p(0x80, REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); - local_irq_enable(); - - if ((clockspeed_reg & 0xE0) == 0xE0) - return 0; - - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) - return 66000; - else - return 99000; - } - - /* 33 MHz is not 32 MHz... */ - if ((clockspeed_reg & 0xE0) == 0xA0) - return 33000; - - return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; -} - - -/** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number - * @freq: frequency in kHz - * - * This function takes a frequency value and changes the CPU frequency - * according to this. Note that the frequency has to be checked by - * elanfreq_validatespeed() for correctness! - * - * There is no return value. - */ - -static void elanfreq_set_cpu_state(unsigned int state) -{ - struct cpufreq_freqs freqs; - - freqs.old = elanfreq_get_cpu_frequency(0); - freqs.new = elan_multiplier[state].clock; - freqs.cpu = 0; /* elanfreq.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", - elan_multiplier[state].clock); - - - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) - * - */ - - /* - * 0x40 is the Power Management Unit's Force Mode Register. - * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) - */ - - local_irq_disable(); - outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ - outb_p(0x00, REG_CSCDR); - local_irq_enable(); /* wait till internal pipelines and */ - udelay(1000); /* buffers have cleaned up */ - - local_irq_disable(); - - /* now, set the CPU clock speed register (0x80) */ - outb_p(0x80, REG_CSCIR); - outb_p(elan_multiplier[state].val80h, REG_CSCDR); - - /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ - outb_p(0x40, REG_CSCIR); - outb_p(elan_multiplier[state].val40h, REG_CSCDR); - udelay(10000); - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - - -/** - * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int elanfreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); -} - -static int elanfreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - elanfreq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int elanfreq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - unsigned int i; - int result; - - /* capability check */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model != 10)) - return -ENODEV; - - /* max freq */ - if (!max_freq) - max_freq = elanfreq_get_cpu_frequency(0); - - /* table init */ - for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if (elanfreq_table[i].frequency > max_freq) - elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; - } - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = elanfreq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - return 0; -} - - -static int elanfreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -#ifndef MODULE -/** - * elanfreq_setup - elanfreq command line parameter parsing - * - * elanfreq command line parameter. Use: - * elanfreq=66000 - * to set the maximum CPU frequency to 66 MHz. Note that in - * case you do not give this boot parameter, the maximum - * frequency will fall back to _current_ CPU frequency which - * might be lower. If you build this as a module, use the - * max_freq module parameter instead. - */ -static int __init elanfreq_setup(char *str) -{ - max_freq = simple_strtoul(str, &str, 0); - printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); - return 1; -} -__setup("elanfreq=", elanfreq_setup); -#endif - - -static struct freq_attr *elanfreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, - .init = elanfreq_cpu_init, - .exit = elanfreq_cpu_exit, - .name = "elanfreq", - .owner = THIS_MODULE, - .attr = elanfreq_attr, -}; - - -static int __init elanfreq_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - /* Test if we have the right hardware */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model != 10)) { - printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); - return -ENODEV; - } - return cpufreq_register_driver(&elanfreq_driver); -} - - -static void __exit elanfreq_exit(void) -{ - cpufreq_unregister_driver(&elanfreq_driver); -} - - -module_param(max_freq, int, 0444); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " - "Sven Geggus <sven@geggus.net>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); - -module_init(elanfreq_init); -module_exit(elanfreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c deleted file mode 100644 index 32974cf84232..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ /dev/null @@ -1,517 +0,0 @@ -/* - * Cyrix MediaGX and NatSemi Geode Suspend Modulation - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Hiroshi Miura <miura@da-cha.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Theoretical note: - * - * (see Geode(tm) CS5530 manual (rev.4.1) page.56) - * - * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 - * are based on Suspend Modulation. - * - * Suspend Modulation works by asserting and de-asserting the SUSP# pin - * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is - * asserted then power consumption is reduced. - * - * Suspend Modulation's OFF/ON duration are configurable - * with 'Suspend Modulation OFF Count Register' - * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of - * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) - * to the processor. - * - * These counters define a ratio which is the effective frequency - * of operation of the system. - * - * OFF Count - * F_eff = Fgx * ---------------------- - * OFF Count + ON Count - * - * 0 <= On Count, Off Count <= 255 - * - * From these limits, we can get register values - * - * off_duration + on_duration <= MAX_DURATION - * on_duration = off_duration * (stock_freq - freq) / freq - * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration - * - * - *--------------------------------------------------------------------------- - * - * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. - * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and - * NatSemi Geode Cs5530(A). - * - * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * - cs5530_mod patch for 2.4.19-rc1. - * - *--------------------------------------------------------------------------- - * - * Todo - * Test on machines with 5510, 5530, 5530A - */ - -/************************************************************************ - * Suspend Modulation - Definitions * - ************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/slab.h> - -#include <asm/processor-cyrix.h> - -/* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ - -/* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ - -/* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the below is supported only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ - -struct gxfreq_params { - u8 on_duration; - u8 off_duration; - u8 pci_suscfg; - u8 pci_pmer1; - u8 pci_pmer2; - struct pci_dev *cs55x0; -}; - -static struct gxfreq_params *gx_params; -static int stock_freq; - -/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk; -module_param(pci_busclk, int, 0444); - -/* maximum duration for which the cpu may be suspended - * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. - * Note that this leads to a maximum of 8 ms(!) where the CPU clock - * is suspended -- processing power is just 0.39% of what it used to be, - * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ -static int max_duration = 255; -module_param(max_duration, int, 0444); - -/* For the default policy, we want at least some processing power - * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) - */ -#define POLICY_MIN_DIV 20 - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "gx-suspmod", msg) - -/** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 - * of 33.3MHz - **/ -static int gx_freq_mult[16] = { - 4, 10, 4, 6, 9, 5, 7, 8, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - - -/**************************************************************** - * Low Level chipset interface * - ****************************************************************/ -static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY), }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), }, - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), }, - { 0, }, -}; - -static void gx_write_byte(int reg, int value) -{ - pci_write_config_byte(gx_params->cs55x0, reg, value); -} - -/** - * gx_detect_chipset: - * - **/ -static __init struct pci_dev *gx_detect_chipset(void) -{ - struct pci_dev *gx_pci = NULL; - - /* check if CPU is a MediaGX or a Geode. */ - if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) && - (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { - dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; - } - - /* detect which companion chip is used */ - for_each_pci_dev(gx_pci) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) - return gx_pci; - } - - dprintk("error: no supported chipset found!\n"); - return NULL; -} - -/** - * gx_get_cpuspeed: - * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi - * Geode CPU runs. - */ -static unsigned int gx_get_cpuspeed(unsigned int cpu) -{ - if ((gx_params->pci_suscfg & SUSMOD) == 0) - return stock_freq; - - return (stock_freq * gx_params->off_duration) - / (gx_params->on_duration + gx_params->off_duration); -} - -/** - * gx_validate_speed: - * determine current cpu speed - * - **/ - -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, - u8 *off_duration) -{ - unsigned int i; - u8 tmp_on, tmp_off; - int old_tmp_freq = stock_freq; - int tmp_freq; - - *off_duration = 1; - *on_duration = 0; - - for (i = max_duration; i > 0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; - tmp_on = i - tmp_off; - tmp_freq = (stock_freq * tmp_off) / i; - /* if this relation is closer to khz, use this. If it's equal, - * prefer it, too - lower latency */ - if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { - *on_duration = tmp_on; - *off_duration = tmp_off; - old_tmp_freq = tmp_freq; - } - } - - return old_tmp_freq; -} - - -/** - * gx_set_cpuspeed: - * set cpu speed in khz. - **/ - -static void gx_set_cpuspeed(unsigned int khz) -{ - u8 suscfg, pmer1; - unsigned int new_khz; - unsigned long flags; - struct cpufreq_freqs freqs; - - freqs.cpu = 0; - freqs.old = gx_get_cpuspeed(0); - - new_khz = gx_validate_speed(khz, &gx_params->on_duration, - &gx_params->off_duration); - - freqs.new = new_khz; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - - - - if (new_khz != stock_freq) { - /* if new khz == 100% of CPU speed, it is special case */ - switch (gx_params->cs55x0->device) { - case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; - /* FIXME: need to test other values -- Zwane,Miura */ - /* typical 2 to 4ms */ - gx_write_byte(PCI_IRQTC, 4); - /* typical 50 to 100ms */ - gx_write_byte(PCI_VIDTC, 100); - gx_write_byte(PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { - /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg|SUSMOD; - } else { - /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; - } - break; - case PCI_DEVICE_ID_CYRIX_5520: - case PCI_DEVICE_ID_CYRIX_5510: - suscfg = gx_params->pci_suscfg | SUSMOD; - break; - default: - local_irq_restore(flags); - dprintk("fatal: try to set unknown chipset.\n"); - return; - } - } else { - suscfg = gx_params->pci_suscfg & ~(SUSMOD); - gx_params->off_duration = 0; - gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100%% speed.\n"); - } - - gx_write_byte(PCI_MODOFF, gx_params->off_duration); - gx_write_byte(PCI_MODON, gx_params->on_duration); - - gx_write_byte(PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - - local_irq_restore(flags); - - gx_params->pci_suscfg = suscfg; - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); -} - -/**************************************************************** - * High level functions * - ****************************************************************/ - -/* - * cpufreq_gx_verify: test if frequency range is valid - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int cpufreq_gx_verify(struct cpufreq_policy *policy) -{ - unsigned int tmp_freq = 0; - u8 tmp1, tmp2; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), - stock_freq); - - /* it needs to be assured that at least one supported frequency is - * within policy->min and policy->max. If it is not, policy->max - * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a - * specific processing capacity. - */ - tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) - tmp_freq += stock_freq / max_duration; - policy->min = tmp_freq; - if (policy->min > policy->max) - policy->max = tmp_freq; - tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); - if (tmp_freq > policy->max) - tmp_freq -= stock_freq / max_duration; - policy->max = tmp_freq; - if (policy->max < policy->min) - policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), - stock_freq); - - return 0; -} - -/* - * cpufreq_gx_target: - * - */ -static int cpufreq_gx_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - u8 tmp1, tmp2; - unsigned int tmp_freq; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - - tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); - while (tmp_freq < policy->min) { - tmp_freq += stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - while (tmp_freq > policy->max) { - tmp_freq -= stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - - gx_set_cpuspeed(tmp_freq); - - return 0; -} - -static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int maxfreq, curfreq; - - if (!policy || policy->cpu != 0) - return -ENODEV; - - /* determine maximum frequency */ - if (pci_busclk) - maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - else if (cpu_khz) - maxfreq = cpu_khz; - else - maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - - stock_freq = maxfreq; - curfreq = gx_get_cpuspeed(0); - - dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n", curfreq); - - /* setup basic struct for cpufreq API */ - policy->cpu = 0; - - if (max_duration < POLICY_MIN_DIV) - policy->min = maxfreq / max_duration; - else - policy->min = maxfreq / POLICY_MIN_DIV; - policy->max = maxfreq; - policy->cur = curfreq; - policy->cpuinfo.min_freq = maxfreq / max_duration; - policy->cpuinfo.max_freq = maxfreq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - - return 0; -} - -/* - * cpufreq_gx_init: - * MediaGX/Geode GX initialize cpufreq driver - */ -static struct cpufreq_driver gx_suspmod_driver = { - .get = gx_get_cpuspeed, - .verify = cpufreq_gx_verify, - .target = cpufreq_gx_target, - .init = cpufreq_gx_cpu_init, - .name = "gx-suspmod", - .owner = THIS_MODULE, -}; - -static int __init cpufreq_gx_init(void) -{ - int ret; - struct gxfreq_params *params; - struct pci_dev *gx_pci; - - /* Test if we have the right hardware */ - gx_pci = gx_detect_chipset(); - if (gx_pci == NULL) - return -ENODEV; - - /* check whether module parameters are sane */ - if (max_duration > 0xff) - max_duration = 0xff; - - dprintk("geode suspend modulation available.\n"); - - params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); - if (params == NULL) - return -ENOMEM; - - params->cs55x0 = gx_pci; - gx_params = params; - - /* keep cs55x0 configurations */ - pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); - pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); - pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); - pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, - &(params->off_duration)); - - ret = cpufreq_register_driver(&gx_suspmod_driver); - if (ret) { - kfree(params); - return ret; /* register error! */ - } - - return 0; -} - -static void __exit cpufreq_gx_exit(void) -{ - cpufreq_unregister_driver(&gx_suspmod_driver); - pci_dev_put(gx_params->cs55x0); - kfree(gx_params); -} - -MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); -MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE("GPL"); - -module_init(cpufreq_gx_init); -module_exit(cpufreq_gx_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c deleted file mode 100644 index cf48cdd6907d..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ /dev/null @@ -1,1029 +0,0 @@ -/* - * (C) 2001-2004 Dave Jones. <davej@redhat.com> - * (C) 2002 Padraig Brady. <padraig@antefacto.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by VIA. - * - * VIA have currently 3 different versions of Longhaul. - * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. - * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is backward compatible with v1, but adds - * LONGHAUL MSR for purpose of both frequency and voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). - * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use only the POWERSAVER MSR at 0x110a. - * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. - * It's pretty much the same feature wise to longhaul v2, though - * there is provision for scaling FSB too, but this doesn't work - * too well in practice so we don't even try to use this. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/timex.h> -#include <linux/io.h> -#include <linux/acpi.h> - -#include <asm/msr.h> -#include <acpi/processor.h> - -#include "longhaul.h" - -#define PFX "longhaul: " - -#define TYPE_LONGHAUL_V1 1 -#define TYPE_LONGHAUL_V2 2 -#define TYPE_POWERSAVER 3 - -#define CPU_SAMUEL 1 -#define CPU_SAMUEL2 2 -#define CPU_EZRA 3 -#define CPU_EZRA_T 4 -#define CPU_NEHEMIAH 5 -#define CPU_NEHEMIAH_C 6 - -/* Flags */ -#define USE_ACPI_C3 (1 << 1) -#define USE_NORTHBRIDGE (1 << 2) - -static int cpu_model; -static unsigned int numscales = 16; -static unsigned int fsb; - -static const struct mV_pos *vrm_mV_table; -static const unsigned char *mV_vrm_table; - -static unsigned int highest_speed, lowest_speed; /* kHz */ -static unsigned int minmult, maxmult; -static int can_scale_voltage; -static struct acpi_processor *pr; -static struct acpi_processor_cx *cx; -static u32 acpi_regs_addr; -static u8 longhaul_flags; -static unsigned int longhaul_index; - -/* Module parameters */ -static int scale_voltage; -static int disable_acpi_c3; -static int revid_errata; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "longhaul", msg) - - -/* Clock ratios multiplied by 10 */ -static int mults[32]; -static int eblcr[32]; -static int longhaul_version; -static struct cpufreq_frequency_table *longhaul_table; - -#ifdef CONFIG_CPU_FREQ_DEBUG -static char speedbuffer[8]; - -static char *print_speed(int speed) -{ - if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); - return speedbuffer; - } - - if (speed%1000 == 0) - snprintf(speedbuffer, sizeof(speedbuffer), - "%dGHz", speed/1000); - else - snprintf(speedbuffer, sizeof(speedbuffer), - "%d.%dGHz", speed/1000, (speed%1000)/100); - - return speedbuffer; -} -#endif - - -static unsigned int calc_speed(int mult) -{ - int khz; - khz = (mult/10)*fsb; - if (mult%10) - khz += fsb/2; - khz *= 1000; - return khz; -} - - -static int longhaul_get_cpu_mult(void) -{ - unsigned long invalue = 0, lo, hi; - - rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; - if (longhaul_version == TYPE_LONGHAUL_V2 || - longhaul_version == TYPE_POWERSAVER) { - if (lo & (1<<27)) - invalue += 16; - } - return eblcr[invalue]; -} - -/* For processor with BCR2 MSR */ - -static void do_longhaul1(unsigned int mults_index) -{ - union msr_bcr2 bcr2; - - rdmsrl(MSR_VIA_BCR2, bcr2.val); - /* Enable software clock multiplier */ - bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = mults_index & 0xff; - - /* Sync to timer tick */ - safe_halt(); - /* Change frequency on next halt or sleep */ - wrmsrl(MSR_VIA_BCR2, bcr2.val); - /* Invoke transition */ - ACPI_FLUSH_CPU_CACHE(); - halt(); - - /* Disable software clock multiplier */ - local_irq_disable(); - rdmsrl(MSR_VIA_BCR2, bcr2.val); - bcr2.bits.ESOFTBF = 0; - wrmsrl(MSR_VIA_BCR2, bcr2.val); -} - -/* For processor with Longhaul MSR */ - -static void do_powersaver(int cx_address, unsigned int mults_index, - unsigned int dir) -{ - union msr_longhaul longhaul; - u32 t; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Setup new frequency */ - if (!revid_errata) - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; - else - longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = mults_index & 0xf; - longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; - /* Setup new voltage */ - if (can_scale_voltage) - longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; - /* Sync to timer tick */ - safe_halt(); - /* Raise voltage if necessary */ - if (can_scale_voltage && dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } - - /* Change frequency on next halt or sleep */ - longhaul.bits.EnableSoftBusRatio = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - /* Disable bus ratio bit */ - longhaul.bits.EnableSoftBusRatio = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - - /* Reduce voltage if necessary */ - if (can_scale_voltage && !dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } -} - -/** - * longhaul_set_cpu_frequency() - * @mults_index : bitpattern of the new multiplier. - * - * Sets a new clock ratio. - */ - -static void longhaul_setstate(unsigned int table_index) -{ - unsigned int mults_index; - int speed, mult; - struct cpufreq_freqs freqs; - unsigned long flags; - unsigned int pic1_mask, pic2_mask; - u16 bm_status = 0; - u32 bm_timeout = 1000; - unsigned int dir = 0; - - mults_index = longhaul_table[table_index].index; - /* Safety precautions */ - mult = mults[mults_index & 0x1f]; - if (mult == -1) - return; - speed = calc_speed(mult); - if ((speed > highest_speed) || (speed < lowest_speed)) - return; - /* Voltage transition before frequency transition? */ - if (can_scale_voltage && longhaul_index < table_index) - dir = 1; - - freqs.old = calc_speed(longhaul_get_cpu_mult()); - freqs.new = speed; - freqs.cpu = 0; /* longhaul.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", - fsb, mult/10, mult%10, print_speed(speed/1000)); -retry_loop: - preempt_disable(); - local_irq_save(flags); - - pic2_mask = inb(0xA1); - pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF, 0xA1); /* Overkill */ - outb(0xFE, 0x21); /* TMR0 only */ - - /* Wait while PCI bus is busy. */ - if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE - || ((pr != NULL) && pr->flags.bm_control))) { - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - while (bm_status && bm_timeout) { - outw(1 << 4, acpi_regs_addr); - bm_timeout--; - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - } - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Disable AGP and PCI arbiters */ - outb(3, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Disable bus master arbitration */ - acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); - } - switch (longhaul_version) { - - /* - * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) - * Software controlled multipliers only. - */ - case TYPE_LONGHAUL_V1: - do_longhaul1(mults_index); - break; - - /* - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] - * - * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * Nehemiah can do FSB scaling too, but this has never been proven - * to work in practice. - */ - case TYPE_LONGHAUL_V2: - case TYPE_POWERSAVER: - if (longhaul_flags & USE_ACPI_C3) { - /* Don't allow wakeup */ - acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, mults_index, dir); - } else { - do_powersaver(0, mults_index, dir); - } - break; - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Enable arbiters */ - outb(0, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Enable bus master arbitration */ - acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); - } - outb(pic2_mask, 0xA1); /* restore mask */ - outb(pic1_mask, 0x21); - - local_irq_restore(flags); - preempt_enable(); - - freqs.new = calc_speed(longhaul_get_cpu_mult()); - /* Check if requested frequency is set. */ - if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); - /* Revision ID = 1 but processor is expecting revision key - * equal to 0. Jumpers at the bottom of processor will change - * multiplier and FSB, but will not change bits in Longhaul - * MSR nor enable voltage scaling. */ - if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); - revid_errata = 1; - msleep(200); - goto retry_loop; - } - /* Why ACPI C3 sometimes doesn't work is a mystery for me. - * But it does happen. Processor is entering ACPI C3 state, - * but it doesn't change frequency. I tried poking various - * bits in northbridge registers, but without success. */ - if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); - longhaul_flags &= ~USE_ACPI_C3; - if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); - revid_errata = 0; - } - msleep(200); - goto retry_loop; - } - /* This shouldn't happen. Longhaul ver. 2 was reported not - * working on processors without voltage scaling, but with - * RevID = 1. RevID errata will make things right. Just - * to be 100% sure. */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); - longhaul_version = TYPE_LONGHAUL_V1; - msleep(200); - goto retry_loop; - } - } - /* Report true CPU frequency */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); -} - -/* - * Centaur decided to make life a little more tricky. - * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. - * Samuel2 and above have to try and guess what the FSB is. - * We do this by assuming we booted at maximum multiplier, and interpolate - * between that value multiplied by possible FSBs and cpu_mhz which - * was calculated at boot time. Really ugly, but no other way to do this. - */ - -#define ROUNDING 0xf - -static int guess_fsb(int mult) -{ - int speed = cpu_khz / 1000; - int i; - int speeds[] = { 666, 1000, 1333, 2000 }; - int f_max, f_min; - - for (i = 0; i < 4; i++) { - f_max = ((speeds[i] * mult) + 50) / 100; - f_max += (ROUNDING / 2); - f_min = f_max - ROUNDING; - if ((speed <= f_max) && (speed >= f_min)) - return speeds[i] / 10; - } - return 0; -} - - -static int __cpuinit longhaul_get_ranges(void) -{ - unsigned int i, j, k = 0; - unsigned int ratio; - int mult; - - /* Get current frequency */ - mult = longhaul_get_cpu_mult(); - if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); - return -EINVAL; - } - fsb = guess_fsb(mult); - if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - /* Get max multiplier - as we always did. - * Longhaul MSR is useful only when voltage scaling is enabled. - * C3 is booting at max anyway. */ - maxmult = mult; - /* Get min multiplier */ - switch (cpu_model) { - case CPU_NEHEMIAH: - minmult = 50; - break; - case CPU_NEHEMIAH_C: - minmult = 40; - break; - default: - minmult = 30; - break; - } - - dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n", - minmult/10, minmult%10, maxmult/10, maxmult%10); - - highest_speed = calc_speed(maxmult); - lowest_speed = calc_speed(minmult); - dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, - print_speed(lowest_speed/1000), - print_speed(highest_speed/1000)); - - if (lowest_speed == highest_speed) { - printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); - return -EINVAL; - } - if (lowest_speed > highest_speed) { - printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", - lowest_speed, highest_speed); - return -EINVAL; - } - - longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table), - GFP_KERNEL); - if (!longhaul_table) - return -ENOMEM; - - for (j = 0; j < numscales; j++) { - ratio = mults[j]; - if (ratio == -1) - continue; - if (ratio > maxmult || ratio < minmult) - continue; - longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; - k++; - } - if (k <= 1) { - kfree(longhaul_table); - return -ENODEV; - } - /* Sort */ - for (j = 0; j < k - 1; j++) { - unsigned int min_f, min_i; - min_f = longhaul_table[j].frequency; - min_i = j; - for (i = j + 1; i < k; i++) { - if (longhaul_table[i].frequency < min_f) { - min_f = longhaul_table[i].frequency; - min_i = i; - } - } - if (min_i != j) { - swap(longhaul_table[j].frequency, - longhaul_table[min_i].frequency); - swap(longhaul_table[j].index, - longhaul_table[min_i].index); - } - } - - longhaul_table[k].frequency = CPUFREQ_TABLE_END; - - /* Find index we are running on */ - for (j = 0; j < k; j++) { - if (mults[longhaul_table[j].index & 0x1f] == mult) { - longhaul_index = j; - break; - } - } - return 0; -} - - -static void __cpuinit longhaul_setup_voltagescaling(void) -{ - union msr_longhaul longhaul; - struct mV_pos minvid, maxvid, vid; - unsigned int j, speed, pos, kHz_step, numvscales; - int min_vid_speed; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); - return; - } - - if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); - vrm_mV_table = &vrm85_mV[0]; - mV_vrm_table = &mV_vrm85[0]; - } else { - printk(KERN_INFO PFX "Mobile VRM\n"); - if (cpu_model < CPU_NEHEMIAH) - return; - vrm_mV_table = &mobilevrm_mV[0]; - mV_vrm_table = &mV_mobilevrm[0]; - } - - minvid = vrm_mV_table[longhaul.bits.MinimumVID]; - maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - - if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - if (minvid.mV == maxvid.mV) { - printk(KERN_INFO PFX "Claims to support voltage scaling but " - "min & max are both %d.%03d. " - "Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - /* How many voltage steps*/ - numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", - maxvid.mV/1000, maxvid.mV%1000, - minvid.mV/1000, minvid.mV%1000, - numvscales); - - /* Calculate max frequency at min voltage */ - j = longhaul.bits.MinMHzBR; - if (longhaul.bits.MinMHzBR4) - j += 16; - min_vid_speed = eblcr[j]; - if (min_vid_speed == -1) - return; - switch (longhaul.bits.MinMHzFSB) { - case 0: - min_vid_speed *= 13333; - break; - case 1: - min_vid_speed *= 10000; - break; - case 3: - min_vid_speed *= 6666; - break; - default: - return; - break; - } - if (min_vid_speed >= highest_speed) - return; - /* Calculate kHz for one voltage step */ - kHz_step = (highest_speed - min_vid_speed) / numvscales; - - j = 0; - while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { - speed = longhaul_table[j].frequency; - if (speed > min_vid_speed) - pos = (speed - min_vid_speed) / kHz_step + minvid.pos; - else - pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; - vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", - speed, j, vid.mV); - j++; - } - - can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); -} - - -static int longhaul_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, longhaul_table); -} - - -static int longhaul_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int table_index = 0; - unsigned int i; - unsigned int dir = 0; - u8 vid, current_vid; - - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, - relation, &table_index)) - return -EINVAL; - - /* Don't set same frequency again */ - if (longhaul_index == table_index) - return 0; - - if (!can_scale_voltage) - longhaul_setstate(table_index); - else { - /* On test system voltage transitions exceeding single - * step up or down were turning motherboard off. Both - * "ondemand" and "userspace" are unsafe. C7 is doing - * this in hardware, C3 is old and we need to do this - * in software. */ - i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8); - current_vid &= 0x1f; - if (table_index > longhaul_index) - dir = 1; - while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; - if (vid != current_vid) { - longhaul_setstate(i); - current_vid = vid; - msleep(200); - } - if (dir) - i++; - else - i--; - } - longhaul_setstate(table_index); - } - longhaul_index = table_index; - return 0; -} - - -static unsigned int longhaul_get(unsigned int cpu) -{ - if (cpu) - return 0; - return calc_speed(longhaul_get_cpu_mult()); -} - -static acpi_status longhaul_walk_callback(acpi_handle obj_handle, - u32 nesting_level, - void *context, void **return_value) -{ - struct acpi_device *d; - - if (acpi_bus_get_device(obj_handle, &d)) - return 0; - - *return_value = acpi_driver_data(d); - return 1; -} - -/* VIA don't support PM2 reg, but have something similar */ -static int enable_arbiter_disable(void) -{ - struct pci_dev *dev; - int status = 1; - int reg; - u8 pci_cmd; - - /* Find PLE133 host bridge */ - reg = 0x78; - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, - NULL); - /* Find PM133/VT8605 host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8605_0, NULL); - /* Find CLE266 host bridge */ - if (dev == NULL) { - reg = 0x76; - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_862X_0, NULL); - /* Find CN400 V-Link host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); - } - if (dev != NULL) { - /* Enable access to port 0x22 */ - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - pci_cmd |= 1<<7; - pci_write_config_byte(dev, reg, pci_cmd); - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); - status = 0; - } - } - pci_dev_put(dev); - return status; - } - return 0; -} - -static int longhaul_setup_southbridge(void) -{ - struct pci_dev *dev; - u8 pci_cmd; - - /* Find VT8235 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); - if (dev == NULL) - /* Find VT8237 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8237, NULL); - if (dev != NULL) { - /* Set transition time to max */ - pci_read_config_byte(dev, 0xec, &pci_cmd); - pci_cmd &= ~(1 << 2); - pci_write_config_byte(dev, 0xec, pci_cmd); - pci_read_config_byte(dev, 0xe4, &pci_cmd); - pci_cmd &= ~(1 << 7); - pci_write_config_byte(dev, 0xe4, pci_cmd); - pci_read_config_byte(dev, 0xe5, &pci_cmd); - pci_cmd |= 1 << 7; - pci_write_config_byte(dev, 0xe5, pci_cmd); - /* Get address of ACPI registers block*/ - pci_read_config_byte(dev, 0x81, &pci_cmd); - if (pci_cmd & 1 << 7) { - pci_read_config_dword(dev, 0x88, &acpi_regs_addr); - acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", - acpi_regs_addr); - } - - pci_dev_put(dev); - return 1; - } - return 0; -} - -static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - char *cpuname = NULL; - int ret; - u32 lo, hi; - - /* Check what we have on this motherboard */ - switch (c->x86_model) { - case 6: - cpu_model = CPU_SAMUEL; - cpuname = "C3 'Samuel' [C5A]"; - longhaul_version = TYPE_LONGHAUL_V1; - memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); - memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); - break; - - case 7: - switch (c->x86_mask) { - case 0: - longhaul_version = TYPE_LONGHAUL_V1; - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had - * Samuel1 ratios. */ - memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); - memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); - break; - case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V2; - if (c->x86_mask < 8) { - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - } else { - cpu_model = CPU_EZRA; - cpuname = "C3 'Ezra' [C5C]"; - } - memcpy(mults, ezra_mults, sizeof(ezra_mults)); - memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); - break; - } - break; - - case 8: - cpu_model = CPU_EZRA_T; - cpuname = "C3 'Ezra-T' [C5M]"; - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); - memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); - break; - - case 9: - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); - memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); - switch (c->x86_mask) { - case 0 ... 1: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah A' [C5XLOE]"; - break; - case 2 ... 4: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah B' [C5XLOH]"; - break; - case 5 ... 15: - cpu_model = CPU_NEHEMIAH_C; - cpuname = "C3 'Nehemiah C' [C5P]"; - break; - } - break; - - default: - cpuname = "Unknown"; - break; - } - /* Check Longhaul ver. 2 */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - rdmsr(MSR_VIA_LONGHAUL, lo, hi); - if (lo == 0 && hi == 0) - /* Looks like MSR isn't present */ - longhaul_version = TYPE_LONGHAUL_V1; - } - - printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); - break; - case TYPE_POWERSAVER: - printk(KERN_CONT "Powersaver supported.\n"); - break; - }; - - /* Doesn't hurt */ - longhaul_setup_southbridge(); - - /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, &longhaul_walk_callback, NULL, - NULL, (void *)&pr); - - /* Check ACPI support for C3 state */ - if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { - cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && cx->latency <= 1000) - longhaul_flags |= USE_ACPI_C3; - } - /* Disable if it isn't working */ - if (disable_acpi_c3) - longhaul_flags &= ~USE_ACPI_C3; - /* Check if northbridge is friendly */ - if (enable_arbiter_disable()) - longhaul_flags |= USE_NORTHBRIDGE; - - /* Check ACPI support for bus master arbiter disable */ - if (!(longhaul_flags & USE_ACPI_C3 - || longhaul_flags & USE_NORTHBRIDGE) - && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); - return -ENODEV; - } - - if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); - if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); - - ret = longhaul_get_ranges(); - if (ret != 0) - return ret; - - if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) - longhaul_setup_voltagescaling(); - - policy->cpuinfo.transition_latency = 200000; /* nsec */ - policy->cur = calc_speed(longhaul_get_cpu_mult()); - - ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); - if (ret) - return ret; - - cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); - - return 0; -} - -static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *longhaul_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver longhaul_driver = { - .verify = longhaul_verify, - .target = longhaul_target, - .get = longhaul_get, - .init = longhaul_cpu_init, - .exit = __devexit_p(longhaul_cpu_exit), - .name = "longhaul", - .owner = THIS_MODULE, - .attr = longhaul_attr, -}; - - -static int __init longhaul_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6) - return -ENODEV; - -#ifdef CONFIG_SMP - if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, " - "longhaul disabled.\n"); - return -ENODEV; - } -#endif -#ifdef CONFIG_X86_IO_APIC - if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently " - "broken in this configuration.\n"); - return -ENODEV; - } -#endif - switch (c->x86_model) { - case 6 ... 9: - return cpufreq_register_driver(&longhaul_driver); - case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); - default: - ; - } - - return -ENODEV; -} - - -static void __exit longhaul_exit(void) -{ - int i; - - for (i = 0; i < numscales; i++) { - if (mults[i] == maxmult) { - longhaul_setstate(i); - break; - } - } - - cpufreq_unregister_driver(&longhaul_driver); - kfree(longhaul_table); -} - -/* Even if BIOS is exporting ACPI C3 state, and it is used - * with success when CPU is idle, this state doesn't - * trigger frequency transition in some cases. */ -module_param(disable_acpi_c3, int, 0644); -MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); -/* Change CPU voltage with frequency. Very useful to save - * power, but most VIA C3 processors aren't supporting it. */ -module_param(scale_voltage, int, 0644); -MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -/* Force revision key to 0 for processors which doesn't - * support voltage scaling, but are introducing itself as - * such. */ -module_param(revid_errata, int, 0644); -MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE("GPL"); - -late_initcall(longhaul_init); -module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h deleted file mode 100644 index cbf48fbca881..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - * longhaul.h - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * VIA-specific information - */ - -union msr_bcr2 { - struct { - unsigned Reseved:19, // 18:0 - ESOFTBF:1, // 19 - Reserved2:3, // 22:20 - CLOCKMUL:4, // 26:23 - Reserved3:5; // 31:27 - } bits; - unsigned long val; -}; - -union msr_longhaul { - struct { - unsigned RevisionID:4, // 3:0 - RevisionKey:4, // 7:4 - EnableSoftBusRatio:1, // 8 - EnableSoftVID:1, // 9 - EnableSoftBSEL:1, // 10 - Reserved:3, // 11:13 - SoftBusRatio4:1, // 14 - VRMRev:1, // 15 - SoftBusRatio:4, // 19:16 - SoftVID:5, // 24:20 - Reserved2:3, // 27:25 - SoftBSEL:2, // 29:28 - Reserved3:2, // 31:30 - MaxMHzBR:4, // 35:32 - MaximumVID:5, // 40:36 - MaxMHzFSB:2, // 42:41 - MaxMHzBR4:1, // 43 - Reserved4:4, // 47:44 - MinMHzBR:4, // 51:48 - MinimumVID:5, // 56:52 - MinMHzFSB:2, // 58:57 - MinMHzBR4:1, // 59 - Reserved5:4; // 63:60 - } bits; - unsigned long long val; -}; - -/* - * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr values specify the ratio read from the CPU. - * The mults values specify what to write to the CPU. - */ - -/* - * VIA C3 Samuel 1 & Samuel 2 (stepping 0) - */ -static const int __cpuinitdata samuel1_mults[16] = { - -1, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - -1, /* 0100 -> RESERVED */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - -1, /* 1111 -> RESERVED */ -}; - -static const int __cpuinitdata samuel1_eblcr[16] = { - 50, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - -1, /* 0111 -> RESERVED */ - -1, /* 1000 -> RESERVED */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - -1, /* 1100 -> RESERVED */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Samuel2 Stepping 1->15 - */ -static const int __cpuinitdata samuel2_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 110, /* 0111 -> 11.0x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 130, /* 1110 -> 13.0x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Ezra - */ -static const int __cpuinitdata ezra_mults[16] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ -}; - -static const int __cpuinitdata ezra_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 (Ezra-T) [C5M]. - */ -static const int __cpuinitdata ezrat_mults[32] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - - -1, /* 0000 -> RESERVED (10.0x) */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (9.0x)*/ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> RESERVED (12.0x) */ -}; - -static const int __cpuinitdata ezrat_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - - -1, /* 0000 -> RESERVED (9.0x) */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (10.0x)*/ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - -1, /* 1100 -> RESERVED (12.0x) */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145, /* 1111 -> 14.5x */ -}; - -/* - * VIA C3 Nehemiah */ - -static const int __cpuinitdata nehemiah_mults[32] = { - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - -1, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> 12.0x */ -}; - -static const int __cpuinitdata nehemiah_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ -}; - -/* - * Voltage scales. Div/Mod by 1000 to get actual voltage. - * Which scale to use depends on the VRM type in use. - */ - -struct mV_pos { - unsigned short mV; - unsigned short pos; -}; - -static const struct mV_pos __cpuinitdata vrm85_mV[32] = { - {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, - {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, - {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, - {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, - {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, - {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, - {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, - {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} -}; - -static const unsigned char __cpuinitdata mV_vrm85[32] = { - 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, - 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, - 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, - 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 -}; - -static const struct mV_pos __cpuinitdata mobilevrm_mV[32] = { - {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, - {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, - {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, - {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, - {975, 15}, {950, 14}, {925, 13}, {900, 12}, - {875, 11}, {850, 10}, {825, 9}, {800, 8}, - {775, 7}, {750, 6}, {725, 5}, {700, 4}, - {675, 3}, {650, 2}, {625, 1}, {600, 0} -}; - -static const unsigned char __cpuinitdata mV_mobilevrm[32] = { - 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, - 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, - 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, - 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 -}; - diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c deleted file mode 100644 index d9f51367666b..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/timex.h> - -#include <asm/msr.h> -#include <asm/processor.h> - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "longrun", msg) - -static struct cpufreq_driver longrun_driver; - -/** - * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz - * values into per cent values. In TMTA microcode, the following is valid: - * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - */ -static unsigned int longrun_low_freq, longrun_high_freq; - - -/** - * longrun_get_policy - get the current LongRun policy - * @policy: struct cpufreq_policy where current policy is written into - * - * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS - * and MSR_TMTA_LONGRUN_CTRL - */ -static void __cpuinit longrun_get_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi); - if (msr_lo & 0x01) - policy->policy = CPUFREQ_POLICY_PERFORMANCE; - else - policy->policy = CPUFREQ_POLICY_POWERSAVE; - - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi); - msr_lo &= 0x0000007F; - msr_hi &= 0x0000007F; - - if (longrun_high_freq <= longrun_low_freq) { - /* Assume degenerate Longrun table */ - policy->min = policy->max = longrun_high_freq; - } else { - policy->min = longrun_low_freq + msr_lo * - ((longrun_high_freq - longrun_low_freq) / 100); - policy->max = longrun_low_freq + msr_hi * - ((longrun_high_freq - longrun_low_freq) / 100); - } - policy->cpu = 0; -} - - -/** - * longrun_set_policy - sets a new CPUFreq policy - * @policy: new policy - * - * Sets a new CPUFreq policy on LongRun-capable processors. This function - * has to be called with cpufreq_driver locked. - */ -static int longrun_set_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - u32 pctg_lo, pctg_hi; - - if (!policy) - return -EINVAL; - - if (longrun_high_freq <= longrun_low_freq) { - /* Assume degenerate Longrun table */ - pctg_lo = pctg_hi = 100; - } else { - pctg_lo = (policy->min - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - pctg_hi = (policy->max - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - } - - if (pctg_hi > 100) - pctg_hi = 100; - if (pctg_lo > pctg_hi) - pctg_lo = pctg_hi; - - /* performance or economy mode */ - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - msr_lo &= 0xFFFFFFFE; - switch (policy->policy) { - case CPUFREQ_POLICY_PERFORMANCE: - msr_lo |= 0x00000001; - break; - case CPUFREQ_POLICY_POWERSAVE: - break; - } - wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - - /* lower and upper boundary */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_lo |= pctg_lo; - msr_hi |= pctg_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - return 0; -} - - -/** - * longrun_verify_poliy - verifies a new CPUFreq policy - * @policy: the policy to verify - * - * Validates a new CPUFreq policy. This function has to be called with - * cpufreq_driver locked. - */ -static int longrun_verify_policy(struct cpufreq_policy *policy) -{ - if (!policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && - (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) - return -EINVAL; - - return 0; -} - -static unsigned int longrun_get(unsigned int cpu) -{ - u32 eax, ebx, ecx, edx; - - if (cpu) - return 0; - - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - dprintk("cpuid eax is %u\n", eax); - - return eax * 1000; -} - -/** - * longrun_determine_freqs - determines the lowest and highest possible core frequency - * @low_freq: an int to put the lowest frequency into - * @high_freq: an int to put the highest frequency into - * - * Determines the lowest and highest possible core frequencies on this CPU. - * This is necessary to calculate the performance percentage according to - * TMTA rules: - * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) - */ -static int __cpuinit longrun_determine_freqs(unsigned int *low_freq, - unsigned int *high_freq) -{ - u32 msr_lo, msr_hi; - u32 save_lo, save_hi; - u32 eax, ebx, ecx, edx; - u32 try_hi; - struct cpuinfo_x86 *c = &cpu_data(0); - - if (!low_freq || !high_freq) - return -EINVAL; - - if (cpu_has(c, X86_FEATURE_LRTI)) { - /* if the LongRun Table Interface is present, the - * detection is a bit easier: - * For minimum frequency, read out the maximum - * level (msr_hi), write that into "currently - * selected level", and read out the frequency. - * For maximum frequency, read out level zero. - */ - /* minimum */ - rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); - wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *low_freq = msr_lo * 1000; /* to kHz */ - - /* maximum */ - wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *high_freq = msr_lo * 1000; /* to kHz */ - - dprintk("longrun table interface told %u - %u kHz\n", - *low_freq, *high_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - return 0; - } - - /* set the upper border to the value determined during TSC init */ - *high_freq = (cpu_khz / 1000); - *high_freq = *high_freq * 1000; - dprintk("high frequency is %u kHz\n", *high_freq); - - /* get current borders */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - save_lo = msr_lo & 0x0000007F; - save_hi = msr_hi & 0x0000007F; - - /* if current perf_pctg is larger than 90%, we need to decrease the - * upper limit to make the calculation more accurate. - */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - /* try decreasing in 10% steps, some processors react only - * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { - /* set to 0 to try_hi perf_pctg */ - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_hi |= try_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - /* read out current core MHz and current perf_pctg */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - - /* restore values */ - wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); - } - dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax); - - /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - * eqals - * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) - * - * high_freq * perf_pctg is stored tempoarily into "ebx". - */ - ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ - - if ((ecx > 95) || (ecx == 0) || (eax < ebx)) - return -EIO; - - edx = ((eax - ebx) * 100) / (100 - ecx); - *low_freq = edx * 1000; /* back to kHz */ - - dprintk("low frequency is %u kHz\n", *low_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - - return 0; -} - - -static int __cpuinit longrun_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* detect low and high frequency */ - result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); - if (result) - return result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = longrun_low_freq; - policy->cpuinfo.max_freq = longrun_high_freq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - longrun_get_policy(policy); - - return 0; -} - - -static struct cpufreq_driver longrun_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .verify = longrun_verify_policy, - .setpolicy = longrun_set_policy, - .get = longrun_get, - .init = longrun_cpu_init, - .name = "longrun", - .owner = THIS_MODULE, -}; - - -/** - * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver - * - * Initializes the LongRun support. - */ -static int __init longrun_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if (c->x86_vendor != X86_VENDOR_TRANSMETA || - !cpu_has(c, X86_FEATURE_LONGRUN)) - return -ENODEV; - - return cpufreq_register_driver(&longrun_driver); -} - - -/** - * longrun_exit - unregisters LongRun support - */ -static void __exit longrun_exit(void) -{ - cpufreq_unregister_driver(&longrun_driver); -} - - -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " - "Efficeon processors."); -MODULE_LICENSE("GPL"); - -module_init(longrun_init); -module_exit(longrun_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/arch/x86/kernel/cpu/cpufreq/mperf.c deleted file mode 100644 index 911e193018ae..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/mperf.c +++ /dev/null @@ -1,51 +0,0 @@ -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> - -#include "mperf.h" - -static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf); - -/* Called via smp_call_function_single(), on the target CPU */ -static void read_measured_perf_ctrs(void *_cur) -{ - struct aperfmperf *am = _cur; - - get_aperfmperf(am); -} - -/* - * Return the measured active (C0) frequency on this CPU since last call - * to this function. - * Input: cpu number - * Return: Average CPU frequency in terms of max frequency (zero on error) - * - * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance - * over a period of time, while CPU is in C0 state. - * IA32_MPERF counts at the rate of max advertised frequency - * IA32_APERF counts at the rate of actual CPU frequency - * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and - * no meaning should be associated with absolute values of these MSRs. - */ -unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy, - unsigned int cpu) -{ - struct aperfmperf perf; - unsigned long ratio; - unsigned int retval; - - if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1)) - return 0; - - ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf); - per_cpu(acfreq_old_perf, cpu) = perf; - - retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT; - - return retval; -} -EXPORT_SYMBOL_GPL(cpufreq_get_measured_perf); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/arch/x86/kernel/cpu/cpufreq/mperf.h deleted file mode 100644 index 5dbf2950dc22..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/mperf.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * (c) 2010 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy, - unsigned int cpu); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c deleted file mode 100644 index 52c93648e492..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Pentium 4/Xeon CPU on demand clock modulation/speed scaling - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Arjan van de Ven <arjanv@redhat.com> - * (C) 2002 Tora T. Engstad - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Date Errata Description - * 20020525 N44, O17 12.5% or 25% DC causes lockup - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/cpumask.h> -#include <linux/timex.h> - -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/timer.h> - -#include "speedstep-lib.h" - -#define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "p4-clockmod", msg) - -/* - * Duty Cycle (3bits), note DC_DISABLE is not specified in - * intel docs i just use it to mean disable - */ -enum { - DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, - DC_64PT, DC_75PT, DC_88PT, DC_DISABLE -}; - -#define DC_ENTRIES 8 - - -static int has_N44_O17_errata[NR_CPUS]; -static unsigned int stock_freq; -static struct cpufreq_driver p4clockmod_driver; -static unsigned int cpufreq_p4_get(unsigned int cpu); - -static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) -{ - u32 l, h; - - if (!cpu_online(cpu) || - (newstate > DC_DISABLE) || (newstate == DC_RESV)) - return -EINVAL; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); - - if (l & 0x01) - dprintk("CPU#%d currently thermal throttled\n", cpu); - - if (has_N44_O17_errata[cpu] && - (newstate == DC_25PT || newstate == DC_DFLT)) - newstate = DC_38PT; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - if (newstate == DC_DISABLE) { - dprintk("CPU#%d disabling modulation\n", cpu); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); - } else { - dprintk("CPU#%d setting duty cycle to %d%%\n", - cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved - * bit 4 : enable/disable - * bits 3-1 : duty cycle - * bit 0 : reserved - */ - l = (l & ~14); - l = l | (1<<4) | ((newstate & 0x7)<<1); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); - } - - return 0; -} - - -static struct cpufreq_frequency_table p4clockmod_table[] = { - {DC_RESV, CPUFREQ_ENTRY_INVALID}, - {DC_DFLT, 0}, - {DC_25PT, 0}, - {DC_38PT, 0}, - {DC_50PT, 0}, - {DC_64PT, 0}, - {DC_75PT, 0}, - {DC_88PT, 0}, - {DC_DISABLE, 0}, - {DC_RESV, CPUFREQ_TABLE_END}, -}; - - -static int cpufreq_p4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = DC_RESV; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; - - if (freqs.new == freqs.old) - return 0; - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - /* run on each logical CPU, - * see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 - */ - for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); - - /* notifiers */ - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -static int cpufreq_p4_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); -} - - -static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x06) { - if (cpu_has(c, X86_FEATURE_EST)) - printk_once(KERN_WARNING PFX "Warning: EST-capable " - "CPU detected. The acpi-cpufreq module offers " - "voltage scaling in addition to frequency " - "scaling. You should use that instead of " - "p4-clockmod, if possible.\n"); - switch (c->x86_model) { - case 0x0E: /* Core */ - case 0x0F: /* Core Duo */ - case 0x16: /* Celeron Core */ - case 0x1C: /* Atom */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); - case 0x0D: /* Pentium M (Dothan) */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - /* fall through */ - case 0x09: /* Pentium M (Banias) */ - return speedstep_get_frequency(SPEEDSTEP_CPU_PM); - } - } - - if (c->x86 != 0xF) - return 0; - - /* on P-4s, the TSC runs with constant frequency independent whether - * throttling is active or not. */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { - printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " - "The speedstep-ich or acpi cpufreq modules offer " - "voltage scaling in addition of frequency scaling. " - "You should use either one instead of p4-clockmod, " - "if possible.\n"); - return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); - } - - return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); -} - - - -static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(policy->cpu); - int cpuid = 0; - unsigned int i; - -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - - /* Errata workaround */ - cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; - switch (cpuid) { - case 0x0f07: - case 0x0f0a: - case 0x0f11: - case 0x0f12: - has_N44_O17_errata[policy->cpu] = 1; - dprintk("has errata -- disabling low frequencies\n"); - } - - if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && - c->x86_model < 2) { - /* switch to maximum frequency and measure result */ - cpufreq_p4_setdc(policy->cpu, DC_DISABLE); - recalibrate_cpu_khz(); - } - /* get max frequency */ - stock_freq = cpufreq_p4_get_frequency(c); - if (!stock_freq) - return -EINVAL; - - /* table init */ - for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i < 2) && (has_N44_O17_errata[policy->cpu])) - p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else - p4clockmod_table[i].frequency = (stock_freq * i)/8; - } - cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - - /* cpuinfo and default policy values */ - - /* the transition latency is set to be 1 higher than the maximum - * transition latency of the ondemand governor */ - policy->cpuinfo.transition_latency = 10000001; - policy->cur = stock_freq; - - return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); -} - - -static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int cpufreq_p4_get(unsigned int cpu) -{ - u32 l, h; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - - if (l & 0x10) { - l = l >> 1; - l &= 0x7; - } else - l = DC_DISABLE; - - if (l != DC_DISABLE) - return stock_freq * l / 8; - - return stock_freq; -} - -static struct freq_attr *p4clockmod_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, - .target = cpufreq_p4_target, - .init = cpufreq_p4_cpu_init, - .exit = cpufreq_p4_cpu_exit, - .get = cpufreq_p4_get, - .name = "p4-clockmod", - .owner = THIS_MODULE, - .attr = p4clockmod_attr, -}; - - -static int __init cpufreq_p4_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int ret; - - /* - * THERM_CONTROL is architectural for IA32 now, so - * we can rely on the capability checks - */ - if (c->x86_vendor != X86_VENDOR_INTEL) - return -ENODEV; - - if (!test_cpu_cap(c, X86_FEATURE_ACPI) || - !test_cpu_cap(c, X86_FEATURE_ACC)) - return -ENODEV; - - ret = cpufreq_register_driver(&p4clockmod_driver); - if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " - "Modulation available\n"); - - return ret; -} - - -static void __exit cpufreq_p4_exit(void) -{ - cpufreq_unregister_driver(&p4clockmod_driver); -} - - -MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); -MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE("GPL"); - -late_initcall(cpufreq_p4_init); -module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c deleted file mode 100644 index 755a31e0f5b0..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c +++ /dev/null @@ -1,624 +0,0 @@ -/* - * pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface - * - * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com> - * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. - * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON - * INFRINGEMENT. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/slab.h> - -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/uaccess.h> - -#include <acpi/processor.h> - -#define PCC_VERSION "1.00.00" -#define POLL_LOOPS 300 - -#define CMD_COMPLETE 0x1 -#define CMD_GET_FREQ 0x0 -#define CMD_SET_FREQ 0x1 - -#define BUF_SZ 4 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "pcc-cpufreq", msg) - -struct pcc_register_resource { - u8 descriptor; - u16 length; - u8 space_id; - u8 bit_width; - u8 bit_offset; - u8 access_size; - u64 address; -} __attribute__ ((packed)); - -struct pcc_memory_resource { - u8 descriptor; - u16 length; - u8 space_id; - u8 resource_usage; - u8 type_specific; - u64 granularity; - u64 minimum; - u64 maximum; - u64 translation_offset; - u64 address_length; -} __attribute__ ((packed)); - -static struct cpufreq_driver pcc_cpufreq_driver; - -struct pcc_header { - u32 signature; - u16 length; - u8 major; - u8 minor; - u32 features; - u16 command; - u16 status; - u32 latency; - u32 minimum_time; - u32 maximum_time; - u32 nominal; - u32 throttled_frequency; - u32 minimum_frequency; -}; - -static void __iomem *pcch_virt_addr; -static struct pcc_header __iomem *pcch_hdr; - -static DEFINE_SPINLOCK(pcc_lock); - -static struct acpi_generic_address doorbell; - -static u64 doorbell_preserve; -static u64 doorbell_write; - -static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f, - 0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46}; - -struct pcc_cpu { - u32 input_offset; - u32 output_offset; -}; - -static struct pcc_cpu __percpu *pcc_cpu_info; - -static int pcc_cpufreq_verify(struct cpufreq_policy *policy) -{ - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static inline void pcc_cmd(void) -{ - u64 doorbell_value; - int i; - - acpi_read(&doorbell_value, &doorbell); - acpi_write((doorbell_value & doorbell_preserve) | doorbell_write, - &doorbell); - - for (i = 0; i < POLL_LOOPS; i++) { - if (ioread16(&pcch_hdr->status) & CMD_COMPLETE) - break; - } -} - -static inline void pcc_clear_mapping(void) -{ - if (pcch_virt_addr) - iounmap(pcch_virt_addr); - pcch_virt_addr = NULL; -} - -static unsigned int pcc_get_freq(unsigned int cpu) -{ - struct pcc_cpu *pcc_cpu_data; - unsigned int curr_freq; - unsigned int freq_limit; - u16 status; - u32 input_buffer; - u32 output_buffer; - - spin_lock(&pcc_lock); - - dprintk("get: get_freq for CPU %d\n", cpu); - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - input_buffer = 0x1; - iowrite32(input_buffer, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - iowrite16(CMD_GET_FREQ, &pcch_hdr->command); - - pcc_cmd(); - - output_buffer = - ioread32(pcch_virt_addr + pcc_cpu_data->output_offset); - - /* Clear the input buffer - we are done with the current command */ - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - - status = ioread16(&pcch_hdr->status); - if (status != CMD_COMPLETE) { - dprintk("get: FAILED: for CPU %d, status is %d\n", - cpu, status); - goto cmd_incomplete; - } - iowrite16(0, &pcch_hdr->status); - curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff)) - / 100) * 1000); - - dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is " - "0x%x, contains a value of: 0x%x. Speed is: %d MHz\n", - cpu, (pcch_virt_addr + pcc_cpu_data->output_offset), - output_buffer, curr_freq); - - freq_limit = (output_buffer >> 8) & 0xff; - if (freq_limit != 0xff) { - dprintk("get: frequency for cpu %d is being temporarily" - " capped at %d\n", cpu, curr_freq); - } - - spin_unlock(&pcc_lock); - return curr_freq; - -cmd_incomplete: - iowrite16(0, &pcch_hdr->status); - spin_unlock(&pcc_lock); - return 0; -} - -static int pcc_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct pcc_cpu *pcc_cpu_data; - struct cpufreq_freqs freqs; - u16 status; - u32 input_buffer; - int cpu; - - spin_lock(&pcc_lock); - cpu = policy->cpu; - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - dprintk("target: CPU %d should go to target freq: %d " - "(virtual) input_offset is 0x%x\n", - cpu, target_freq, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - - freqs.new = target_freq; - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - input_buffer = 0x1 | (((target_freq * 100) - / (ioread32(&pcch_hdr->nominal) * 1000)) << 8); - iowrite32(input_buffer, - (pcch_virt_addr + pcc_cpu_data->input_offset)); - iowrite16(CMD_SET_FREQ, &pcch_hdr->command); - - pcc_cmd(); - - /* Clear the input buffer - we are done with the current command */ - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - - status = ioread16(&pcch_hdr->status); - if (status != CMD_COMPLETE) { - dprintk("target: FAILED for cpu %d, with status: 0x%x\n", - cpu, status); - goto cmd_incomplete; - } - iowrite16(0, &pcch_hdr->status); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("target: was SUCCESSFUL for cpu %d\n", cpu); - spin_unlock(&pcc_lock); - - return 0; - -cmd_incomplete: - iowrite16(0, &pcch_hdr->status); - spin_unlock(&pcc_lock); - return -EINVAL; -} - -static int pcc_get_offset(int cpu) -{ - acpi_status status; - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *pccp, *offset; - struct pcc_cpu *pcc_cpu_data; - struct acpi_processor *pr; - int ret = 0; - - pr = per_cpu(processors, cpu); - pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); - - status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); - if (ACPI_FAILURE(status)) - return -ENODEV; - - pccp = buffer.pointer; - if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) { - ret = -ENODEV; - goto out_free; - }; - - offset = &(pccp->package.elements[0]); - if (!offset || offset->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto out_free; - } - - pcc_cpu_data->input_offset = offset->integer.value; - - offset = &(pccp->package.elements[1]); - if (!offset || offset->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto out_free; - } - - pcc_cpu_data->output_offset = offset->integer.value; - - memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ); - memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ); - - dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data " - "input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n", - cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset); -out_free: - kfree(buffer.pointer); - return ret; -} - -static int __init pcc_cpufreq_do_osc(acpi_handle *handle) -{ - acpi_status status; - struct acpi_object_list input; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object in_params[4]; - union acpi_object *out_obj; - u32 capabilities[2]; - u32 errors; - u32 supported; - int ret = 0; - - input.count = 4; - input.pointer = in_params; - in_params[0].type = ACPI_TYPE_BUFFER; - in_params[0].buffer.length = 16; - in_params[0].buffer.pointer = OSC_UUID; - in_params[1].type = ACPI_TYPE_INTEGER; - in_params[1].integer.value = 1; - in_params[2].type = ACPI_TYPE_INTEGER; - in_params[2].integer.value = 2; - in_params[3].type = ACPI_TYPE_BUFFER; - in_params[3].buffer.length = 8; - in_params[3].buffer.pointer = (u8 *)&capabilities; - - capabilities[0] = OSC_QUERY_ENABLE; - capabilities[1] = 0x1; - - status = acpi_evaluate_object(*handle, "_OSC", &input, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (!output.length) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) { - ret = -ENODEV; - goto out_free; - } - - supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) { - ret = -ENODEV; - goto out_free; - } - - kfree(output.pointer); - capabilities[0] = 0x0; - capabilities[1] = 0x1; - - status = acpi_evaluate_object(*handle, "_OSC", &input, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - if (!output.length) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); - if (errors) { - ret = -ENODEV; - goto out_free; - } - - supported = *((u32 *)(out_obj->buffer.pointer + 4)); - if (!(supported & 0x1)) { - ret = -ENODEV; - goto out_free; - } - -out_free: - kfree(output.pointer); - return ret; -} - -static int __init pcc_cpufreq_probe(void) -{ - acpi_status status; - struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; - struct pcc_memory_resource *mem_resource; - struct pcc_register_resource *reg_resource; - union acpi_object *out_obj, *member; - acpi_handle handle, osc_handle, pcch_handle; - int ret = 0; - - status = acpi_get_handle(NULL, "\\_SB", &handle); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = acpi_get_handle(handle, "PCCH", &pcch_handle); - if (ACPI_FAILURE(status)) - return -ENODEV; - - status = acpi_get_handle(handle, "_OSC", &osc_handle); - if (ACPI_SUCCESS(status)) { - ret = pcc_cpufreq_do_osc(&osc_handle); - if (ret) - dprintk("probe: _OSC evaluation did not succeed\n"); - /* Firmware's use of _OSC is optional */ - ret = 0; - } - - status = acpi_evaluate_object(handle, "PCCH", NULL, &output); - if (ACPI_FAILURE(status)) - return -ENODEV; - - out_obj = output.pointer; - if (out_obj->type != ACPI_TYPE_PACKAGE) { - ret = -ENODEV; - goto out_free; - } - - member = &out_obj->package.elements[0]; - if (member->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto out_free; - } - - mem_resource = (struct pcc_memory_resource *)member->buffer.pointer; - - dprintk("probe: mem_resource descriptor: 0x%x," - " length: %d, space_id: %d, resource_usage: %d," - " type_specific: %d, granularity: 0x%llx," - " minimum: 0x%llx, maximum: 0x%llx," - " translation_offset: 0x%llx, address_length: 0x%llx\n", - mem_resource->descriptor, mem_resource->length, - mem_resource->space_id, mem_resource->resource_usage, - mem_resource->type_specific, mem_resource->granularity, - mem_resource->minimum, mem_resource->maximum, - mem_resource->translation_offset, - mem_resource->address_length); - - if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) { - ret = -ENODEV; - goto out_free; - } - - pcch_virt_addr = ioremap_nocache(mem_resource->minimum, - mem_resource->address_length); - if (pcch_virt_addr == NULL) { - dprintk("probe: could not map shared mem region\n"); - goto out_free; - } - pcch_hdr = pcch_virt_addr; - - dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr); - dprintk("probe: PCCH header is at physical address: 0x%llx," - " signature: 0x%x, length: %d bytes, major: %d, minor: %d," - " supported features: 0x%x, command field: 0x%x," - " status field: 0x%x, nominal latency: %d us\n", - mem_resource->minimum, ioread32(&pcch_hdr->signature), - ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major), - ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features), - ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status), - ioread32(&pcch_hdr->latency)); - - dprintk("probe: min time between commands: %d us," - " max time between commands: %d us," - " nominal CPU frequency: %d MHz," - " minimum CPU frequency: %d MHz," - " minimum CPU frequency without throttling: %d MHz\n", - ioread32(&pcch_hdr->minimum_time), - ioread32(&pcch_hdr->maximum_time), - ioread32(&pcch_hdr->nominal), - ioread32(&pcch_hdr->throttled_frequency), - ioread32(&pcch_hdr->minimum_frequency)); - - member = &out_obj->package.elements[1]; - if (member->type != ACPI_TYPE_BUFFER) { - ret = -ENODEV; - goto pcch_free; - } - - reg_resource = (struct pcc_register_resource *)member->buffer.pointer; - - doorbell.space_id = reg_resource->space_id; - doorbell.bit_width = reg_resource->bit_width; - doorbell.bit_offset = reg_resource->bit_offset; - doorbell.access_width = 64; - doorbell.address = reg_resource->address; - - dprintk("probe: doorbell: space_id is %d, bit_width is %d, " - "bit_offset is %d, access_width is %d, address is 0x%llx\n", - doorbell.space_id, doorbell.bit_width, doorbell.bit_offset, - doorbell.access_width, reg_resource->address); - - member = &out_obj->package.elements[2]; - if (member->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto pcch_free; - } - - doorbell_preserve = member->integer.value; - - member = &out_obj->package.elements[3]; - if (member->type != ACPI_TYPE_INTEGER) { - ret = -ENODEV; - goto pcch_free; - } - - doorbell_write = member->integer.value; - - dprintk("probe: doorbell_preserve: 0x%llx," - " doorbell_write: 0x%llx\n", - doorbell_preserve, doorbell_write); - - pcc_cpu_info = alloc_percpu(struct pcc_cpu); - if (!pcc_cpu_info) { - ret = -ENOMEM; - goto pcch_free; - } - - printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency" - " limits: %d MHz, %d MHz\n", PCC_VERSION, - ioread32(&pcch_hdr->minimum_frequency), - ioread32(&pcch_hdr->nominal)); - kfree(output.pointer); - return ret; -pcch_free: - pcc_clear_mapping(); -out_free: - kfree(output.pointer); - return ret; -} - -static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - unsigned int result = 0; - - if (!pcch_virt_addr) { - result = -1; - goto out; - } - - result = pcc_get_offset(cpu); - if (result) { - dprintk("init: PCCP evaluation failed\n"); - goto out; - } - - policy->max = policy->cpuinfo.max_freq = - ioread32(&pcch_hdr->nominal) * 1000; - policy->min = policy->cpuinfo.min_freq = - ioread32(&pcch_hdr->minimum_frequency) * 1000; - policy->cur = pcc_get_freq(cpu); - - if (!policy->cur) { - dprintk("init: Unable to get current CPU frequency\n"); - result = -EINVAL; - goto out; - } - - dprintk("init: policy->max is %d, policy->min is %d\n", - policy->max, policy->min); -out: - return result; -} - -static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver pcc_cpufreq_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .get = pcc_get_freq, - .verify = pcc_cpufreq_verify, - .target = pcc_cpufreq_target, - .init = pcc_cpufreq_cpu_init, - .exit = pcc_cpufreq_cpu_exit, - .name = "pcc-cpufreq", - .owner = THIS_MODULE, -}; - -static int __init pcc_cpufreq_init(void) -{ - int ret; - - if (acpi_disabled) - return 0; - - ret = pcc_cpufreq_probe(); - if (ret) { - dprintk("pcc_cpufreq_init: PCCH evaluation failed\n"); - return ret; - } - - ret = cpufreq_register_driver(&pcc_cpufreq_driver); - - return ret; -} - -static void __exit pcc_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pcc_cpufreq_driver); - - pcc_clear_mapping(); - - free_percpu(pcc_cpu_info); -} - -MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar"); -MODULE_VERSION(PCC_VERSION); -MODULE_DESCRIPTION("Processor Clocking Control interface driver"); -MODULE_LICENSE("GPL"); - -late_initcall(pcc_cpufreq_init); -module_exit(pcc_cpufreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c deleted file mode 100644 index b3379d6a5c57..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, - * Dominik Brodowski. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/msr.h> - -#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long - as it is unused */ - -#define PFX "powernow-k6: " -static unsigned int busfreq; /* FSB, in 10 kHz */ -static unsigned int max_multiplier; - - -/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ -static struct cpufreq_frequency_table clock_ratio[] = { - {45, /* 000 -> 4.5x */ 0}, - {50, /* 001 -> 5.0x */ 0}, - {40, /* 010 -> 4.0x */ 0}, - {55, /* 011 -> 5.5x */ 0}, - {20, /* 100 -> 2.0x */ 0}, - {30, /* 101 -> 3.0x */ 0}, - {60, /* 110 -> 6.0x */ 0}, - {35, /* 111 -> 3.5x */ 0}, - {0, CPUFREQ_TABLE_END} -}; - - -/** - * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier - * - * Returns the current setting of the frequency multiplier. Core clock - * speed is frequency of the Front-Side Bus multiplied with this value. - */ -static int powernow_k6_get_cpu_multiplier(void) -{ - u64 invalue = 0; - u32 msrval; - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue = inl(POWERNOW_IOPORT + 0x8); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - return clock_ratio[(invalue >> 5)&7].index; -} - - -/** - * powernow_k6_set_state - set the PowerNow! multiplier - * @best_i: clock_ratio[best_i] is the target multiplier - * - * Tries to change the PowerNow! multiplier - */ -static void powernow_k6_set_state(unsigned int best_i) -{ - unsigned long outvalue = 0, invalue = 0; - unsigned long msrval; - struct cpufreq_freqs freqs; - - if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR PFX "invalid target frequency\n"); - return; - } - - freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; - freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* we now need to transform best_i to the BVC format, see AMD#23446 */ - - outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5); - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue = inl(POWERNOW_IOPORT + 0x8); - invalue = invalue & 0xf; - outvalue = outvalue | invalue; - outl(outvalue , (POWERNOW_IOPORT + 0x8)); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return; -} - - -/** - * powernow_k6_verify - verifies a new CPUfreq policy - * @policy: new policy - * - * Policy must be within lowest and highest possible CPU Frequency, - * and at least one possible state must be within min and max. - */ -static int powernow_k6_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &clock_ratio[0]); -} - - -/** - * powernow_k6_setpolicy - sets a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * sets a new CPUFreq policy - */ -static int powernow_k6_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], - target_freq, relation, &newstate)) - return -EINVAL; - - powernow_k6_set_state(newstate); - - return 0; -} - - -static int powernow_k6_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i, f; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - /* get frequencies */ - max_multiplier = powernow_k6_get_cpu_multiplier(); - busfreq = cpu_khz / max_multiplier; - - /* table init */ - for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - f = clock_ratio[i].index; - if (f > max_multiplier) - clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; - else - clock_ratio[i].frequency = busfreq * f; - } - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 200000; - policy->cur = busfreq * max_multiplier; - - result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); - if (result) - return result; - - cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); - - return 0; -} - - -static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int i; - for (i = 0; i < 8; i++) { - if (i == max_multiplier) - powernow_k6_set_state(i); - } - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int powernow_k6_get(unsigned int cpu) -{ - unsigned int ret; - ret = (busfreq * powernow_k6_get_cpu_multiplier()); - return ret; -} - -static struct freq_attr *powernow_k6_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, - .init = powernow_k6_cpu_init, - .exit = powernow_k6_cpu_exit, - .get = powernow_k6_get, - .name = "powernow-k6", - .owner = THIS_MODULE, - .attr = powernow_k6_attr, -}; - - -/** - * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver - * - * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported - * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero - * on success. - */ -static int __init powernow_k6_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || - ((c->x86_model != 12) && (c->x86_model != 13))) - return -ENODEV; - - if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); - return -EIO; - } - - if (cpufreq_register_driver(&powernow_k6_driver)) { - release_region(POWERNOW_IOPORT, 16); - return -EINVAL; - } - - return 0; -} - - -/** - * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support - * - * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. - */ -static void __exit powernow_k6_exit(void) -{ - cpufreq_unregister_driver(&powernow_k6_driver); - release_region(POWERNOW_IOPORT, 16); -} - - -MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, " - "Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); -MODULE_LICENSE("GPL"); - -module_init(powernow_k6_init); -module_exit(powernow_k6_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c deleted file mode 100644 index 4a45fd6e41ba..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ /dev/null @@ -1,752 +0,0 @@ -/* - * AMD K7 Powernow driver. - * (C) 2003 Dave Jones on behalf of SuSE Labs. - * (C) 2003-2004 Dave Jones <davej@redhat.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Errata 5: - * CPU may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: - * CPU with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/dmi.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ -#include <asm/msr.h> -#include <asm/system.h> - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -#include <linux/acpi.h> -#include <acpi/processor.h> -#endif - -#include "powernow-k7.h" - -#define PFX "powernow: " - - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags; - u16 settlingtime; - u8 reserved1; - u8 numpst; -}; - -struct pst_s { - u32 cpuid; - u8 fsbspeed; - u8 maxfid; - u8 startvid; - u8 numpstates; -}; - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -union powernow_acpi_control_t { - struct { - unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; - } bits; - unsigned long val; -}; -#endif - -#ifdef CONFIG_CPU_FREQ_DEBUG -/* divide by 1000 to get VCore voltage in V. */ -static const int mobile_vid_table[32] = { - 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, - 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, - 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, - 1075, 1050, 1025, 1000, 975, 950, 925, 0, -}; -#endif - -/* divide by 10 to get FID. */ -static const int fid_codes[32] = { - 110, 115, 120, 125, 50, 55, 60, 65, - 70, 75, 80, 85, 90, 95, 100, 105, - 30, 190, 40, 200, 130, 135, 140, 210, - 150, 225, 160, 165, 170, 180, -1, -1, -}; - -/* This parameter is used in order to force ACPI instead of legacy method for - * configuration purpose. - */ - -static int acpi_force; - -static struct cpufreq_frequency_table *powernow_table; - -static unsigned int can_scale_bus; -static unsigned int can_scale_vid; -static unsigned int minimum_speed = -1; -static unsigned int maximum_speed; -static unsigned int number_scales; -static unsigned int fsb; -static unsigned int latency; -static char have_a0; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "powernow-k7", msg) - -static int check_fsb(unsigned int fsbspeed) -{ - int delta; - unsigned int f = fsb / 1000; - - delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return delta < 5; -} - -static int check_powernow(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - unsigned int maxei, eax, ebx, ecx, edx; - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) { -#ifdef MODULE - printk(KERN_INFO PFX "This module only works with " - "AMD K7 CPUs\n"); -#endif - return 0; - } - - /* Get maximum capabilities */ - maxei = cpuid_eax(0x80000000); - if (maxei < 0x80000007) { /* Any powernow info ? */ -#ifdef MODULE - printk(KERN_INFO PFX "No powernow capabilities detected\n"); -#endif - return 0; - } - - if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk(KERN_INFO PFX "K7 660[A0] core detected, " - "enabling errata workarounds\n"); - have_a0 = 1; - } - - cpuid(0x80000007, &eax, &ebx, &ecx, &edx); - - /* Check we can actually do something before we say anything.*/ - if (!(edx & (1 << 1 | 1 << 2))) - return 0; - - printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); - - if (edx & 1 << 1) { - printk("frequency"); - can_scale_bus = 1; - } - - if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk(" and "); - - if (edx & 1 << 2) { - printk("voltage"); - can_scale_vid = 1; - } - - printk(".\n"); - return 1; -} - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -static void invalidate_entry(unsigned int entry) -{ - powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; -} -#endif - -static int get_ranges(unsigned char *pst) -{ - unsigned int j; - unsigned int speed; - u8 fid, vid; - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * - (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) - return -ENOMEM; - - for (j = 0 ; j < number_scales; j++) { - fid = *pst++; - - powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ - - speed = powernow_table[j].frequency; - - if ((fid_codes[fid] % 10) == 5) { -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (have_a0 == 1) - invalidate_entry(j); -#endif - } - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - - vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - - dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - } - powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; - - return 0; -} - - -static void change_FID(int fid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.FID != fid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.FID = fid; - fidvidctl.bits.VIDC = 0; - fidvidctl.bits.FIDC = 1; - wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_VID(int vid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.VID != vid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.VID = vid; - fidvidctl.bits.FIDC = 0; - fidvidctl.bits.VIDC = 1; - wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_speed(unsigned int index) -{ - u8 fid, vid; - struct cpufreq_freqs freqs; - union msr_fidvidstatus fidvidstatus; - int cfid; - - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in powernow_decode_bios, - * vid are the upper 8 bits. - */ - - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; - - freqs.cpu = 0; - - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - freqs.old = fsb * fid_codes[cfid] / 10; - - freqs.new = powernow_table[index].frequency; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Now do the magic poking into the MSRs. */ - - if (have_a0 == 1) /* A0 errata 5 */ - local_irq_disable(); - - if (freqs.old > freqs.new) { - /* Going down, so change FID first */ - change_FID(fid); - change_VID(vid); - } else { - /* Going up, so change VID first */ - change_VID(vid); - change_FID(fid); - } - - - if (have_a0 == 1) - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -} - - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - -static struct acpi_processor_performance *acpi_processor_perf; - -static int powernow_acpi_init(void) -{ - int i; - int retval = 0; - union powernow_acpi_control_t pc; - - if (acpi_processor_perf != NULL && powernow_table != NULL) { - retval = -EINVAL; - goto err0; - } - - acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), - GFP_KERNEL); - if (!acpi_processor_perf) { - retval = -ENOMEM; - goto err0; - } - - if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, - GFP_KERNEL)) { - retval = -ENOMEM; - goto err05; - } - - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { - retval = -EIO; - goto err1; - } - - if (acpi_processor_perf->control_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - if (acpi_processor_perf->status_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - number_scales = acpi_processor_perf->state_count; - - if (number_scales < 2) { - retval = -ENODEV; - goto err2; - } - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * - (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) { - retval = -ENOMEM; - goto err2; - } - - pc.val = (unsigned long) acpi_processor_perf->states[0].control; - for (i = 0; i < number_scales; i++) { - u8 fid, vid; - struct acpi_processor_px *state = - &acpi_processor_perf->states[i]; - unsigned int speed, speed_mhz; - - pc.val = (unsigned long) state->control; - dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", - i, - (u32) state->core_frequency, - (u32) state->power, - (u32) state->transition_latency, - (u32) state->control, - pc.bits.sgtc); - - vid = pc.bits.vid; - fid = pc.bits.fid; - - powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - - speed = powernow_table[i].frequency; - speed_mhz = speed / 1000; - - /* processor_perflib will multiply the MHz value by 1000 to - * get a KHz value (e.g. 1266000). However, powernow-k7 works - * with true KHz values (e.g. 1266768). To ensure that all - * powernow frequencies are available, we must ensure that - * ACPI doesn't restrict them, so we round up the MHz value - * to ensure that perflib's computed KHz value is greater than - * or equal to powernow's KHz value. - */ - if (speed % 1000 > 0) - speed_mhz++; - - if ((fid_codes[fid] % 10) == 5) { - if (have_a0 == 1) - invalidate_entry(i); - } - - dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed_mhz, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - - if (state->core_frequency != speed_mhz) { - state->core_frequency = speed_mhz; - dprintk(" Corrected ACPI frequency to %d\n", - speed_mhz); - } - - if (latency < pc.bits.sgtc) - latency = pc.bits.sgtc; - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - } - - powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - return 0; - -err2: - acpi_processor_unregister_performance(acpi_processor_perf, 0); -err1: - free_cpumask_var(acpi_processor_perf->shared_cpu_map); -err05: - kfree(acpi_processor_perf); -err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used on " - "this platform\n"); - acpi_processor_perf = NULL; - return retval; -} -#else -static int powernow_acpi_init(void) -{ - printk(KERN_INFO PFX "no support for ACPI processor found." - " Please recompile your kernel with ACPI processor\n"); - return -EINVAL; -} -#endif - -static void print_pst_entry(struct pst_s *pst, unsigned int j) -{ - dprintk("PST:%d (@%p)\n", j, pst); - dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); -} - -static int powernow_decode_bios(int maxfid, int startvid) -{ - struct psb_s *psb; - struct pst_s *pst; - unsigned int i, j; - unsigned char *p; - unsigned int etuple; - unsigned int ret; - - etuple = cpuid_eax(0x80000001); - - for (i = 0xC0000; i < 0xffff0 ; i += 16) { - - p = phys_to_virt(i); - - if (memcmp(p, "AMDK7PNOW!", 10) == 0) { - dprintk("Found PSB header at %p\n", p); - psb = (struct psb_s *) p; - dprintk("Table version: 0x%x\n", psb->tableversion); - if (psb->tableversion != 0x12) { - printk(KERN_INFO PFX "Sorry, only v1.2 tables" - " supported right now\n"); - return -ENODEV; - } - - dprintk("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1) == 0) - dprintk("Mobile voltage regulator\n"); - else - dprintk("Desktop voltage regulator\n"); - - latency = psb->settlingtime; - if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time " - "to %d microseconds. " - "Should be at least 100. " - "Correcting.\n", latency); - latency = 100; - } - dprintk("Settling Time: %d microseconds.\n", - psb->settlingtime); - dprintk("Has %d PST tables. (Only dumping ones " - "relevant to this CPU).\n", - psb->numpst); - - p += sizeof(struct psb_s); - - pst = (struct pst_s *) p; - - for (j = 0; j < psb->numpst; j++) { - pst = (struct pst_s *) p; - number_scales = pst->numpstates; - - if ((etuple == pst->cpuid) && - check_fsb(pst->fsbspeed) && - (maxfid == pst->maxfid) && - (startvid == pst->startvid)) { - print_pst_entry(pst, j); - p = (char *)pst + sizeof(struct pst_s); - ret = get_ranges(p); - return ret; - } else { - unsigned int k; - p = (char *)pst + sizeof(struct pst_s); - for (k = 0; k < number_scales; k++) - p += 2; - } - } - printk(KERN_INFO PFX "No PST tables match this cpuid " - "(0x%x)\n", etuple); - printk(KERN_INFO PFX "This is indicative of a broken " - "BIOS.\n"); - - return -EINVAL; - } - p++; - } - - return -ENODEV; -} - - -static int powernow_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate; - - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, - relation, &newstate)) - return -EINVAL; - - change_speed(newstate); - - return 0; -} - - -static int powernow_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, powernow_table); -} - -/* - * We use the fact that the bus frequency is somehow - * a multiple of 100000/3 khz, then we compute sgtc according - * to this multiple. - * That way, we match more how AMD thinks all of that work. - * We will then get the same kind of behaviour already tested under - * the "well-known" other OS. - */ -static int __cpuinit fixup_sgtc(void) -{ - unsigned int sgtc; - unsigned int m; - - m = fsb / 3333; - if ((m % 10) >= 5) - m += 5; - - m /= 10; - - sgtc = 100 * m * latency; - sgtc = sgtc / 3; - if (sgtc > 0xfffff) { - printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); - sgtc = 0xfffff; - } - return sgtc; -} - -static unsigned int powernow_get(unsigned int cpu) -{ - union msr_fidvidstatus fidvidstatus; - unsigned int cfid; - - if (cpu) - return 0; - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - - return fsb * fid_codes[cfid] / 10; -} - - -static int __cpuinit acer_cpufreq_pst(const struct dmi_system_id *d) -{ - printk(KERN_WARNING PFX - "%s laptop with broken PST tables in BIOS detected.\n", - d->ident); - printk(KERN_WARNING PFX - "You need to downgrade to 3A21 (09/09/2002), or try a newer " - "BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING PFX - "cpufreq scaling has been disabled as a result of this.\n"); - return 0; -} - -/* - * Some Athlon laptops have really fucked PST tables. - * A BIOS update is all that can save them. - * Mention this, and disable cpufreq. - */ -static struct dmi_system_id __cpuinitdata powernow_dmi_table[] = { - { - .callback = acer_cpufreq_pst, - .ident = "Acer Aspire", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), - DMI_MATCH(DMI_BIOS_VERSION, "3A71"), - }, - }, - { } -}; - -static int __cpuinit powernow_cpu_init(struct cpufreq_policy *policy) -{ - union msr_fidvidstatus fidvidstatus; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); - - recalibrate_cpu_khz(); - - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; - if (!fsb) { - printk(KERN_WARNING PFX "can not determine bus frequency\n"); - return -EINVAL; - } - dprintk("FSB: %3dMHz\n", fsb/1000); - - if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk(KERN_INFO PFX "PSB/PST known to be broken. " - "Trying ACPI instead\n"); - result = powernow_acpi_init(); - } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, - fidvidstatus.bits.SVID); - if (result) { - printk(KERN_INFO PFX "Trying ACPI perflib\n"); - maximum_speed = 0; - minimum_speed = -1; - latency = 0; - result = powernow_acpi_init(); - if (result) { - printk(KERN_INFO PFX - "ACPI and legacy methods failed\n"); - } - } else { - /* SGTC use the bus clock as timer */ - latency = fixup_sgtc(); - printk(KERN_INFO PFX "SGTC: %d\n", latency); - } - } - - if (result) - return result; - - printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", - minimum_speed/1000, maximum_speed/1000); - - policy->cpuinfo.transition_latency = - cpufreq_scale(2000000UL, fsb, latency); - - policy->cur = powernow_get(0); - - cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, powernow_table); -} - -static int powernow_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (acpi_processor_perf) { - acpi_processor_unregister_performance(acpi_processor_perf, 0); - free_cpumask_var(acpi_processor_perf->shared_cpu_map); - kfree(acpi_processor_perf); - } -#endif - - kfree(powernow_table); - return 0; -} - -static struct freq_attr *powernow_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, - .get = powernow_get, -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - .bios_limit = acpi_processor_get_bios_limit, -#endif - .init = powernow_cpu_init, - .exit = powernow_cpu_exit, - .name = "powernow-k7", - .owner = THIS_MODULE, - .attr = powernow_table_attr, -}; - -static int __init powernow_init(void) -{ - if (check_powernow() == 0) - return -ENODEV; - return cpufreq_register_driver(&powernow_driver); -} - - -static void __exit powernow_exit(void) -{ - cpufreq_unregister_driver(&powernow_driver); -} - -module_param(acpi_force, int, 0444); -MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); -MODULE_LICENSE("GPL"); - -late_initcall(powernow_init); -module_exit(powernow_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h deleted file mode 100644 index 35fb4eaf6e1c..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * AMD-specific information - * - */ - -union msr_fidvidctl { - struct { - unsigned FID:5, // 4:0 - reserved1:3, // 7:5 - VID:5, // 12:8 - reserved2:3, // 15:13 - FIDC:1, // 16 - VIDC:1, // 17 - reserved3:2, // 19:18 - FIDCHGRATIO:1, // 20 - reserved4:11, // 31-21 - SGTC:20, // 32:51 - reserved5:12; // 63:52 - } bits; - unsigned long long val; -}; - -union msr_fidvidstatus { - struct { - unsigned CFID:5, // 4:0 - reserved1:3, // 7:5 - SFID:5, // 12:8 - reserved2:3, // 15:13 - MFID:5, // 20:16 - reserved3:11, // 31:21 - CVID:5, // 36:32 - reserved4:3, // 39:37 - SVID:5, // 44:40 - reserved5:3, // 47:45 - MVID:5, // 52:48 - reserved6:11; // 63:53 - } bits; - unsigned long long val; -}; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c deleted file mode 100644 index 2368e38327b3..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ /dev/null @@ -1,1607 +0,0 @@ -/* - * (c) 2003-2010 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Support : mark.langsdorf@amd.com - * - * Based on the powernow-k7.c module written by Dave Jones. - * (C) 2003 Dave Jones on behalf of SuSE Labs - * (C) 2004 Dominik Brodowski <linux@brodo.de> - * (C) 2004 Pavel Machek <pavel@ucw.cz> - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Valuable input gratefully received from Dave Jones, Pavel Machek, - * Dominik Brodowski, Jacob Shin, and others. - * Originally developed by Paul Devriendt. - * Processor information obtained from Chapter 9 (Power and Thermal Management) - * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD - * Opteron Processors" available for download from www.amd.com - * - * Tables for specific CPUs can be inferred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/cpumask.h> -#include <linux/sched.h> /* for current / set_cpus_allowed() */ -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/msr.h> - -#include <linux/acpi.h> -#include <linux/mutex.h> -#include <acpi/processor.h> - -#define PFX "powernow-k8: " -#define VERSION "version 2.20.00" -#include "powernow-k8.h" -#include "mperf.h" - -/* serialize freq changes */ -static DEFINE_MUTEX(fidvid_mutex); - -static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data); - -static int cpu_family = CPU_OPTERON; - -/* core performance boost */ -static bool cpb_capable, cpb_enabled; -static struct msr __percpu *msrs; - -static struct cpufreq_driver cpufreq_amd64_driver; - -#ifndef CONFIG_SMP -static inline const struct cpumask *cpu_core_mask(int cpu) -{ - return cpumask_of(0); -} -#endif - -/* Return a frequency in MHz, given an input fid */ -static u32 find_freq_from_fid(u32 fid) -{ - return 800 + (fid * 100); -} - -/* Return a frequency in KHz, given an input fid */ -static u32 find_khz_freq_from_fid(u32 fid) -{ - return 1000 * find_freq_from_fid(fid); -} - -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, - u32 pstate) -{ - return data[pstate].frequency; -} - -/* Return the vco fid for an input fid - * - * Each "low" fid has corresponding "high" fid, and you can get to "low" fids - * only from corresponding high fids. This returns "high" fid corresponding to - * "low" one. - */ -static u32 convert_fid_to_vco_fid(u32 fid) -{ - if (fid < HI_FID_TABLE_BOTTOM) - return 8 + (2 * fid); - else - return fid; -} - -/* - * Return 1 if the pending bit is set. Unless we just instructed the processor - * to transition to a new state, seeing this bit set is really bad news. - */ -static int pending_bit_stuck(void) -{ - u32 lo, hi; - - if (cpu_family == CPU_HW_PSTATE) - return 0; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; -} - -/* - * Update the global current fid / vid values from the status msr. - * Returns 1 on error. - */ -static int query_current_values_with_pending_wait(struct powernow_k8_data *data) -{ - u32 lo, hi; - u32 i = 0; - - if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; - - /* - * a workaround for family 11h erratum 311 might cause - * an "out-of-range Pstate if the core is in Pstate-0 - */ - if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps)) - data->currpstate = HW_PSTATE_0; - - return 0; - } - do { - if (i++ > 10000) { - dprintk("detected change pending stuck\n"); - return 1; - } - rdmsr(MSR_FIDVID_STATUS, lo, hi); - } while (lo & MSR_S_LO_CHANGE_PENDING); - - data->currvid = hi & MSR_S_HI_CURRENT_VID; - data->currfid = lo & MSR_S_LO_CURRENT_FID; - - return 0; -} - -/* the isochronous relief time */ -static void count_off_irt(struct powernow_k8_data *data) -{ - udelay((1 << data->irt) * 10); - return; -} - -/* the voltage stabilization time */ -static void count_off_vst(struct powernow_k8_data *data) -{ - udelay(data->vstable * VST_UNITS_20US); - return; -} - -/* need to init the control msr to a safe value (for each cpu) */ -static void fidvid_msr_init(void) -{ - u32 lo, hi; - u8 fid, vid; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - vid = hi & MSR_S_HI_CURRENT_VID; - fid = lo & MSR_S_LO_CURRENT_FID; - lo = fid | (vid << MSR_C_LO_VID_SHIFT); - hi = MSR_C_HI_STP_GNT_BENIGN; - dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); - wrmsr(MSR_FIDVID_CTL, lo, hi); -} - -/* write the new fid value along with the other control fields to the msr */ -static int write_new_fid(struct powernow_k8_data *data, u32 fid) -{ - u32 lo; - u32 savevid = data->currvid; - u32 i = 0; - - if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on fid write\n"); - return 1; - } - - lo = fid; - lo |= (data->currvid << MSR_C_LO_VID_SHIFT); - lo |= MSR_C_LO_INIT_FID_VID; - - dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", - fid, lo, data->plllock * PLL_LOCK_CONVERSION); - - do { - wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); - if (i++ > 100) { - printk(KERN_ERR PFX - "Hardware error - pending bit very stuck - " - "no further pstate changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - count_off_irt(data); - - if (savevid != data->currvid) { - printk(KERN_ERR PFX - "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); - return 1; - } - - if (fid != data->currfid) { - printk(KERN_ERR PFX - "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); - return 1; - } - - return 0; -} - -/* Write a new vid to the hardware */ -static int write_new_vid(struct powernow_k8_data *data, u32 vid) -{ - u32 lo; - u32 savefid = data->currfid; - int i = 0; - - if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on vid write\n"); - return 1; - } - - lo = data->currfid; - lo |= (vid << MSR_C_LO_VID_SHIFT); - lo |= MSR_C_LO_INIT_FID_VID; - - dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", - vid, lo, STOP_GRANT_5NS); - - do { - wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); - if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit " - "very stuck - no further pstate " - "changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old " - "0x%x new 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " - "curr 0x%x\n", - vid, data->currvid); - return 1; - } - - return 0; -} - -/* - * Reduce the vid by the max of step or reqvid. - * Decreasing vid codes represent increasing voltages: - * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. - */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, - u32 reqvid, u32 step) -{ - if ((data->currvid - reqvid) > step) - reqvid = data->currvid - step; - - if (write_new_vid(data, reqvid)) - return 1; - - count_off_vst(data); - - return 0; -} - -/* Change hardware pstate by single MSR write */ -static int transition_pstate(struct powernow_k8_data *data, u32 pstate) -{ - wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currpstate = pstate; - return 0; -} - -/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, - u32 reqfid, u32 reqvid) -{ - if (core_voltage_pre_transition(data, reqvid, reqfid)) - return 1; - - if (core_frequency_transition(data, reqfid)) - return 1; - - if (core_voltage_post_transition(data, reqvid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " - "curr 0x%x 0x%x\n", - smp_processor_id(), - reqfid, reqvid, data->currfid, data->currvid); - return 1; - } - - dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", - smp_processor_id(), data->currfid, data->currvid); - - return 0; -} - -/* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid, u32 reqfid) -{ - u32 rvosteps = data->rvo; - u32 savefid = data->currfid; - u32 maxvid, lo, rvomult = 1; - - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " - "reqvid 0x%x, rvo 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqvid, data->rvo); - - if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP)) - rvomult = 2; - rvosteps *= rvomult; - rdmsr(MSR_FIDVID_STATUS, lo, maxvid); - maxvid = 0x1f & (maxvid >> 16); - dprintk("ph1 maxvid=0x%x\n", maxvid); - if (reqvid < maxvid) /* lower numbers are higher voltages */ - reqvid = maxvid; - - while (data->currvid > reqvid) { - dprintk("ph1: curr 0x%x, req vid 0x%x\n", - data->currvid, reqvid); - if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) - return 1; - } - - while ((rvosteps > 0) && - ((rvomult * data->rvo + data->currvid) > reqvid)) { - if (data->currvid == maxvid) { - rvosteps = 0; - } else { - dprintk("ph1: changing vid for rvo, req 0x%x\n", - data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid-1, 1)) - return 1; - rvosteps--; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 2 - core frequency transition */ -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) -{ - u32 vcoreqfid, vcocurrfid, vcofiddiff; - u32 fid_interval, savevid = data->currvid; - - if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", - data->currfid); - return 0; - } - - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " - "reqfid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqfid); - - vcoreqfid = convert_fid_to_vco_fid(reqfid); - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - - if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP)) - vcofiddiff = 0; - - while (vcofiddiff > 2) { - (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); - - if (reqfid > data->currfid) { - if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, - data->currfid + fid_interval)) - return 1; - } else { - if (write_new_fid - (data, - 2 + convert_fid_to_vco_fid(data->currfid))) - return 1; - } - } else { - if (write_new_fid(data, data->currfid - fid_interval)) - return 1; - } - - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - } - - if (write_new_fid(data, reqfid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (data->currfid != reqfid) { - printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, " - "curr 0x%x, req 0x%x\n", - data->currfid, reqfid); - return 1; - } - - if (savevid != data->currvid) { - printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n", - savevid, data->currvid); - return 1; - } - - dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, - u32 reqvid) -{ - u32 savefid = data->currfid; - u32 savereqvid = reqvid; - - dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid); - - if (reqvid != data->currvid) { - if (write_new_vid(data, reqvid)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX - "ph3: bad fid change, save 0x%x, curr 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (data->currvid != reqvid) { - printk(KERN_ERR PFX - "ph3: failed vid transition\n, " - "req 0x%x, curr 0x%x", - reqvid, data->currvid); - return 1; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savereqvid != data->currvid) { - dprintk("ph3 failed, currvid 0x%x\n", data->currvid); - return 1; - } - - if (savefid != data->currfid) { - dprintk("ph3 failed, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -static void check_supported_cpu(void *_rc) -{ - u32 eax, ebx, ecx, edx; - int *rc = _rc; - - *rc = -ENODEV; - - if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD) - return; - - eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) && - ((eax & CPUID_XFAM) < CPUID_XFAM_10H)) - return; - - if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { - if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || - ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX - "Processor cpuid %x not supported\n", eax); - return; - } - - eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); - if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { - printk(KERN_INFO PFX - "No frequency change capabilities detected\n"); - return; - } - - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) - != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX - "Power state transitions not supported\n"); - return; - } - } else { /* must be a HW Pstate capable processor */ - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) - cpu_family = CPU_HW_PSTATE; - else - return; - } - - *rc = 0; -} - -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, - u8 maxvid) -{ - unsigned int j; - u8 lastfid = 0xff; - - for (j = 0; j < data->numps; j++) { - if (pst[j].vid > LEAST_VID) { - printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n", - j, pst[j].vid); - return -EINVAL; - } - if (pst[j].vid < data->rvo) { - /* vid + rvo >= 0 */ - printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (pst[j].vid < maxvid + data->rvo) { - /* vid + rvo >= maxvid */ - printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (pst[j].fid > MAX_FID) { - printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate" - " %d\n", j); - return -ENODEV; - } - if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { - /* Only first fid is allowed to be in "low" range */ - printk(KERN_ERR FW_BUG PFX "two low fids - %d : " - "0x%x\n", j, pst[j].fid); - return -EINVAL; - } - if (pst[j].fid < lastfid) - lastfid = pst[j].fid; - } - if (lastfid & 1) { - printk(KERN_ERR FW_BUG PFX "lastfid invalid\n"); - return -EINVAL; - } - if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO FW_BUG PFX - "first fid not from lo freq table\n"); - - return 0; -} - -static void invalidate_entry(struct cpufreq_frequency_table *powernow_table, - unsigned int entry) -{ - powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; -} - -static void print_basics(struct powernow_k8_data *data) -{ - int j; - for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != - CPUFREQ_ENTRY_INVALID) { - if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX - " %d : pstate %d (%d MHz)\n", j, - data->powernow_table[j].index, - data->powernow_table[j].frequency/1000); - } else { - printk(KERN_INFO PFX - "fid 0x%x (%d MHz), vid 0x%x\n", - data->powernow_table[j].index & 0xff, - data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); - } - } - } - if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", - data->batps); -} - -static u32 freq_from_fid_did(u32 fid, u32 did) -{ - u32 mhz = 0; - - if (boot_cpu_data.x86 == 0x10) - mhz = (100 * (fid + 0x10)) >> did; - else if (boot_cpu_data.x86 == 0x11) - mhz = (100 * (fid + 8)) >> did; - else - BUG(); - - return mhz * 1000; -} - -static int fill_powernow_table(struct powernow_k8_data *data, - struct pst_s *pst, u8 maxvid) -{ - struct cpufreq_frequency_table *powernow_table; - unsigned int j; - - if (data->batps) { - /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX - "Only %d pstates usable (use ACPI driver for full " - "range\n", data->batps); - data->numps = data->batps; - } - - for (j = 1; j < data->numps; j++) { - if (pst[j-1].fid >= pst[j].fid) { - printk(KERN_ERR PFX "PST out of sequence\n"); - return -EINVAL; - } - } - - if (data->numps < 2) { - printk(KERN_ERR PFX "no p states to transition\n"); - return -ENODEV; - } - - if (check_pst_table(data, pst, maxvid)) - return -EINVAL; - - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->numps + 1)), GFP_KERNEL); - if (!powernow_table) { - printk(KERN_ERR PFX "powernow_table memory alloc failure\n"); - return -ENOMEM; - } - - for (j = 0; j < data->numps; j++) { - int freq; - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - freq = find_khz_freq_from_fid(pst[j].fid); - powernow_table[j].frequency = freq; - } - powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; - - if (query_current_values_with_pending_wait(data)) { - kfree(powernow_table); - return -EIO; - } - - dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); - data->powernow_table = powernow_table; - if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) - print_basics(data); - - for (j = 0; j < data->numps; j++) - if ((pst[j].fid == data->currfid) && - (pst[j].vid == data->currvid)) - return 0; - - dprintk("currfid/vid do not match PST, ignoring\n"); - return 0; -} - -/* Find and validate the PSB/PST table in BIOS. */ -static int find_psb_table(struct powernow_k8_data *data) -{ - struct psb_s *psb; - unsigned int i; - u32 mvs; - u8 maxvid; - u32 cpst = 0; - u32 thiscpuid; - - for (i = 0xc0000; i < 0xffff0; i += 0x10) { - /* Scan BIOS looking for the signature. */ - /* It can not be at ffff0 - it is too big. */ - - psb = phys_to_virt(i); - if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) - continue; - - dprintk("found PSB header at 0x%p\n", psb); - - dprintk("table vers: 0x%x\n", psb->tableversion); - if (psb->tableversion != PSB_VERSION_1_4) { - printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n"); - return -ENODEV; - } - - dprintk("flags: 0x%x\n", psb->flags1); - if (psb->flags1) { - printk(KERN_ERR FW_BUG PFX "unknown flags\n"); - return -ENODEV; - } - - data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", - data->vstable); - - dprintk("flags2: 0x%x\n", psb->flags2); - data->rvo = psb->flags2 & 3; - data->irt = ((psb->flags2) >> 2) & 3; - mvs = ((psb->flags2) >> 4) & 3; - data->vidmvs = 1 << mvs; - data->batps = ((psb->flags2) >> 6) & 3; - - dprintk("ramp voltage offset: %d\n", data->rvo); - dprintk("isochronous relief time: %d\n", data->irt); - dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); - - dprintk("numpst: 0x%x\n", psb->num_tables); - cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || - (psb->cpuid == 0x00000fe0)) { - thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || - (thiscpuid == 0x00000fe0)) - cpst = 1; - } - if (cpst != 1) { - printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); - return -ENODEV; - } - - data->plllock = psb->plllocktime; - dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); - dprintk("maxfid: 0x%x\n", psb->maxfid); - dprintk("maxvid: 0x%x\n", psb->maxvid); - maxvid = psb->maxvid; - - data->numps = psb->numps; - dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, - (struct pst_s *)(psb+1), maxvid); - } - /* - * If you see this message, complain to BIOS manufacturer. If - * he tells you "we do not support Linux" or some similar - * nonsense, remember that Windows 2000 uses the same legacy - * mechanism that the old Linux PSB driver uses. Tell them it - * is broken with Windows 2000. - * - * The reference to the AMD documentation is chapter 9 in the - * BIOS and Kernel Developer's Guide, which is available on - * www.amd.com - */ - printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); - printk(KERN_ERR PFX "Make sure that your BIOS is up to date" - " and Cool'N'Quiet support is enabled in BIOS setup\n"); - return -ENODEV; -} - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, - unsigned int index) -{ - u64 control; - - if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) - return; - - control = data->acpi_data.states[index].control; - data->irt = (control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (control >> VST_SHIFT) & VST_MASK; -} - -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) -{ - struct cpufreq_frequency_table *powernow_table; - int ret_val = -ENODEV; - u64 control, status; - - if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed: bad ACPI data\n"); - return -EIO; - } - - /* verify the data contained in the ACPI structures */ - if (data->acpi_data.state_count <= 1) { - dprintk("No ACPI P-States\n"); - goto err_out; - } - - control = data->acpi_data.control_register.space_id; - status = data->acpi_data.status_register.space_id; - - if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Invalid control/status registers (%x - %x)\n", - control, status); - goto err_out; - } - - /* fill in data->powernow_table */ - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->acpi_data.state_count + 1)), GFP_KERNEL); - if (!powernow_table) { - dprintk("powernow_table memory alloc failure\n"); - goto err_out; - } - - /* fill in data */ - data->numps = data->acpi_data.state_count; - powernow_k8_acpi_pst_values(data, 0); - - if (cpu_family == CPU_HW_PSTATE) - ret_val = fill_powernow_table_pstate(data, powernow_table); - else - ret_val = fill_powernow_table_fidvid(data, powernow_table); - if (ret_val) - goto err_out_mem; - - powernow_table[data->acpi_data.state_count].frequency = - CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; - data->powernow_table = powernow_table; - - if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) - print_basics(data); - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { - printk(KERN_ERR PFX - "unable to alloc powernow_k8_data cpumask\n"); - ret_val = -ENOMEM; - goto err_out_mem; - } - - return 0; - -err_out_mem: - kfree(powernow_table); - -err_out: - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - - /* data->acpi_data.state_count informs us at ->exit() - * whether ACPI was used */ - data->acpi_data.state_count = 0; - - return ret_val; -} - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - u32 hi = 0, lo = 0; - rdmsr(MSR_PSTATE_CUR_LIMIT, lo, hi); - data->max_hw_pstate = (lo & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 index; - - index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - " - "bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS " - "manufacturer\n"); - invalidate_entry(powernow_table, i); - continue; - } - rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); - if (!(hi & HW_PSTATE_VALID_MASK)) { - dprintk("invalid pstate %d, ignoring\n", index); - invalidate_entry(powernow_table, i); - continue; - } - - powernow_table[i].index = index; - - /* Frequency may be rounded for these */ - if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) - || boot_cpu_data.x86 == 0x11) { - powernow_table[i].frequency = - freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); - } else - powernow_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; - } - return 0; -} - -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, - struct cpufreq_frequency_table *powernow_table) -{ - int i; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 fid; - u32 vid; - u32 freq, index; - u64 status, control; - - if (data->exttype) { - status = data->acpi_data.states[i].status; - fid = status & EXT_FID_MASK; - vid = (status >> VID_SHIFT) & EXT_VID_MASK; - } else { - control = data->acpi_data.states[i].control; - fid = control & FID_MASK; - vid = (control >> VID_SHIFT) & VID_MASK; - } - - dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - - index = fid | (vid<<8); - powernow_table[i].index = index; - - freq = find_khz_freq_from_fid(fid); - powernow_table[i].frequency = freq; - - /* verify frequency is OK */ - if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", freq); - invalidate_entry(powernow_table, i); - continue; - } - - /* verify voltage is OK - - * BIOSs are using "off" to indicate invalid */ - if (vid == VID_OFF) { - dprintk("invalid vid %u, ignoring\n", vid); - invalidate_entry(powernow_table, i); - continue; - } - - if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries " - "%u kHz vs. %u kHz\n", freq, - (unsigned int) - (data->acpi_data.states[i].core_frequency - * 1000)); - invalidate_entry(powernow_table, i); - continue; - } - } - return 0; -} - -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) -{ - if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, - data->cpu); - free_cpumask_var(data->acpi_data.shared_cpu_map); -} - -static int get_transition_latency(struct powernow_k8_data *data) -{ - int max_latency = 0; - int i; - for (i = 0; i < data->acpi_data.state_count; i++) { - int cur_latency = data->acpi_data.states[i].transition_latency - + data->acpi_data.states[i].bus_master_latency; - if (cur_latency > max_latency) - max_latency = cur_latency; - } - if (max_latency == 0) { - /* - * Fam 11h and later may return 0 as transition latency. This - * is intended and means "very fast". While cpufreq core and - * governors currently can handle that gracefully, better set it - * to 1 to avoid problems in the future. - */ - if (boot_cpu_data.x86 < 0x11) - printk(KERN_ERR FW_WARN PFX "Invalid zero transition " - "latency\n"); - max_latency = 1; - } - /* value in usecs, needs to be in nanoseconds */ - return 1000 * max_latency; -} - -/* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, - unsigned int index) -{ - u32 fid = 0; - u32 vid = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* fid/vid correctness check for k8 */ - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid - * are the upper 8 bits. - */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; - - dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((data->currvid == vid) && (data->currfid == fid)) { - dprintk("target matches current values (fid 0x%x, vid 0x%x)\n", - fid, vid); - return 0; - } - - dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", - smp_processor_id(), fid, vid); - freqs.old = find_khz_freq_from_fid(data->currfid); - freqs.new = find_khz_freq_from_fid(fid); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_fid_vid(data, fid, vid); - freqs.new = find_khz_freq_from_fid(data->currfid); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, - unsigned int index) -{ - u32 pstate = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* get MSR index for hardware pstate transition */ - pstate = index & HW_PSTATE_MASK; - if (pstate > data->max_hw_pstate) - return 0; - freqs.old = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_pstate(data, pstate); - freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); - - for_each_cpu(i, data->available_cores) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) -{ - cpumask_var_t oldmask; - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - u32 checkfid; - u32 checkvid; - unsigned int newstate; - int ret = -EIO; - - if (!data) - return -EINVAL; - - checkfid = data->currfid; - checkvid = data->currvid; - - /* only run on specific CPU from here on. */ - /* This is poor form: use a workqueue or smp_call_function_single */ - if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_copy(oldmask, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; - } - - dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", - pol->cpu, targfreq, pol->min, pol->max, relation); - - if (query_current_values_with_pending_wait(data)) - goto err_out; - - if (cpu_family != CPU_HW_PSTATE) { - dprintk("targ: curr fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - if ((checkvid != data->currvid) || - (checkfid != data->currfid)) { - printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, " - "vid 0x%x 0x%x\n", - checkfid, data->currfid, - checkvid, data->currvid); - } - } - - if (cpufreq_frequency_table_target(pol, data->powernow_table, - targfreq, relation, &newstate)) - goto err_out; - - mutex_lock(&fidvid_mutex); - - powernow_k8_acpi_pst_values(data, newstate); - - if (cpu_family == CPU_HW_PSTATE) - ret = transition_frequency_pstate(data, newstate); - else - ret = transition_frequency_fidvid(data, newstate); - if (ret) { - printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; - mutex_unlock(&fidvid_mutex); - goto err_out; - } - mutex_unlock(&fidvid_mutex); - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - newstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; - -err_out: - set_cpus_allowed_ptr(current, oldmask); - free_cpumask_var(oldmask); - return ret; -} - -/* Driver entry point to verify the policy and range of frequencies */ -static int powernowk8_verify(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - return cpufreq_frequency_table_verify(pol, data->powernow_table); -} - -struct init_on_cpu { - struct powernow_k8_data *data; - int rc; -}; - -static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu) -{ - struct init_on_cpu *init_on_cpu = _init_on_cpu; - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing init, change pending bit set\n"); - init_on_cpu->rc = -ENODEV; - return; - } - - if (query_current_values_with_pending_wait(init_on_cpu->data)) { - init_on_cpu->rc = -ENODEV; - return; - } - - if (cpu_family == CPU_OPTERON) - fidvid_msr_init(); - - init_on_cpu->rc = 0; -} - -/* per CPU init entry point to the driver */ -static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) -{ - static const char ACPI_PSS_BIOS_BUG_MSG[] = - KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" - FW_BUG PFX "Try again with latest BIOS.\n"; - struct powernow_k8_data *data; - struct init_on_cpu init_on_cpu; - int rc; - struct cpuinfo_x86 *c = &cpu_data(pol->cpu); - - if (!cpu_online(pol->cpu)) - return -ENODEV; - - smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); - if (rc) - return -ENODEV; - - data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); - if (!data) { - printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); - return -ENOMEM; - } - - data->cpu = pol->cpu; - data->currpstate = HW_PSTATE_INVALID; - - if (powernow_k8_cpu_init_acpi(data)) { - /* - * Use the PSB BIOS structure. This is only available on - * an UP version, and is deprecated by AMD. - */ - if (num_online_cpus() != 1) { - printk_once(ACPI_PSS_BIOS_BUG_MSG); - goto err_out; - } - if (pol->cpu != 0) { - printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " - "CPU other than CPU0. Complain to your BIOS " - "vendor.\n"); - goto err_out; - } - rc = find_psb_table(data); - if (rc) - goto err_out; - - /* Take a crude guess here. - * That guess was in microseconds, so multiply with 1000 */ - pol->cpuinfo.transition_latency = ( - ((data->rvo + 8) * data->vstable * VST_UNITS_20US) + - ((1 << data->irt) * 30)) * 1000; - } else /* ACPI _PSS objects available */ - pol->cpuinfo.transition_latency = get_transition_latency(data); - - /* only run on specific CPU from here on */ - init_on_cpu.data = data; - smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu, - &init_on_cpu, 1); - rc = init_on_cpu.rc; - if (rc != 0) - goto err_out_exit_acpi; - - if (cpu_family == CPU_HW_PSTATE) - cpumask_copy(pol->cpus, cpumask_of(pol->cpu)); - else - cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); - data->available_cores = pol->cpus; - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - dprintk("policy current frequency %d kHz\n", pol->cur); - - /* min/max the cpu is capable of */ - if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { - printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n"); - powernow_k8_cpu_exit_acpi(data); - kfree(data->powernow_table); - kfree(data); - return -EINVAL; - } - - /* Check for APERF/MPERF support in hardware */ - if (cpu_has(c, X86_FEATURE_APERFMPERF)) - cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf; - - cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - - if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current pstate 0x%x\n", - data->currpstate); - else - dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - per_cpu(powernow_data, pol->cpu) = data; - - return 0; - -err_out_exit_acpi: - powernow_k8_cpu_exit_acpi(data); - -err_out: - kfree(data); - return -ENODEV; -} - -static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - powernow_k8_cpu_exit_acpi(data); - - cpufreq_frequency_table_put_attr(pol->cpu); - - kfree(data->powernow_table); - kfree(data); - per_cpu(powernow_data, pol->cpu) = NULL; - - return 0; -} - -static void query_values_on_cpu(void *_err) -{ - int *err = _err; - struct powernow_k8_data *data = __this_cpu_read(powernow_data); - - *err = query_current_values_with_pending_wait(data); -} - -static unsigned int powernowk8_get(unsigned int cpu) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, cpu); - unsigned int khz = 0; - int err; - - if (!data) - return 0; - - smp_call_function_single(cpu, query_values_on_cpu, &err, true); - if (err) - goto out; - - if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_pstate(data->powernow_table, - data->currpstate); - else - khz = find_khz_freq_from_fid(data->currfid); - - -out: - return khz; -} - -static void _cpb_toggle_msrs(bool t) -{ - int cpu; - - get_online_cpus(); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - if (t) - reg->l &= ~BIT(25); - else - reg->l |= BIT(25); - } - wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - put_online_cpus(); -} - -/* - * Switch on/off core performance boosting. - * - * 0=disable - * 1=enable. - */ -static void cpb_toggle(bool t) -{ - if (!cpb_capable) - return; - - if (t && !cpb_enabled) { - cpb_enabled = true; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting enabled.\n"); - } else if (!t && cpb_enabled) { - cpb_enabled = false; - _cpb_toggle_msrs(t); - printk(KERN_INFO PFX "Core Boosting disabled.\n"); - } -} - -static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf, - size_t count) -{ - int ret = -EINVAL; - unsigned long val = 0; - - ret = strict_strtoul(buf, 10, &val); - if (!ret && (val == 0 || val == 1) && cpb_capable) - cpb_toggle(val); - else - return -EINVAL; - - return count; -} - -static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf) -{ - return sprintf(buf, "%u\n", cpb_enabled); -} - -#define define_one_rw(_name) \ -static struct freq_attr _name = \ -__ATTR(_name, 0644, show_##_name, store_##_name) - -define_one_rw(cpb); - -static struct freq_attr *powernow_k8_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - &cpb, - NULL, -}; - -static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, - .bios_limit = acpi_processor_get_bios_limit, - .init = powernowk8_cpu_init, - .exit = __devexit_p(powernowk8_cpu_exit), - .get = powernowk8_get, - .name = "powernow-k8", - .owner = THIS_MODULE, - .attr = powernow_k8_attr, -}; - -/* - * Clear the boost-disable flag on the CPU_DOWN path so that this cpu - * cannot block the remaining ones from boosting. On the CPU_UP path we - * simply keep the boost-disable flag in sync with the current global - * state. - */ -static int cpb_notify(struct notifier_block *nb, unsigned long action, - void *hcpu) -{ - unsigned cpu = (long)hcpu; - u32 lo, hi; - - switch (action) { - case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: - - if (!cpb_enabled) { - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo |= BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - } - break; - - case CPU_DOWN_PREPARE: - case CPU_DOWN_PREPARE_FROZEN: - rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi); - lo &= ~BIT(25); - wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi); - break; - - default: - break; - } - - return NOTIFY_OK; -} - -static struct notifier_block cpb_nb = { - .notifier_call = cpb_notify, -}; - -/* driver entry point for init */ -static int __cpuinit powernowk8_init(void) -{ - unsigned int i, supported_cpus = 0, cpu; - int rv; - - for_each_online_cpu(i) { - int rc; - smp_call_function_single(i, check_supported_cpu, &rc, 1); - if (rc == 0) - supported_cpus++; - } - - if (supported_cpus != num_online_cpus()) - return -ENODEV; - - printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n", - num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - - cpb_capable = true; - - msrs = msrs_alloc(); - if (!msrs) { - printk(KERN_ERR "%s: Error allocating msrs!\n", __func__); - return -ENOMEM; - } - - register_cpu_notifier(&cpb_nb); - - rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs); - - for_each_cpu(cpu, cpu_online_mask) { - struct msr *reg = per_cpu_ptr(msrs, cpu); - cpb_enabled |= !(!!(reg->l & BIT(25))); - } - - printk(KERN_INFO PFX "Core Performance Boosting: %s.\n", - (cpb_enabled ? "on" : "off")); - } - - rv = cpufreq_register_driver(&cpufreq_amd64_driver); - if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) { - unregister_cpu_notifier(&cpb_nb); - msrs_free(msrs); - msrs = NULL; - } - return rv; -} - -/* driver entry point for term */ -static void __exit powernowk8_exit(void) -{ - dprintk("exit\n"); - - if (boot_cpu_has(X86_FEATURE_CPB)) { - msrs_free(msrs); - msrs = NULL; - - unregister_cpu_notifier(&cpb_nb); - } - - cpufreq_unregister_driver(&cpufreq_amd64_driver); -} - -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and " - "Mark Langsdorf <mark.langsdorf@amd.com>"); -MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); -MODULE_LICENSE("GPL"); - -late_initcall(powernowk8_init); -module_exit(powernowk8_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h deleted file mode 100644 index df3529b1c02d..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * (c) 2003-2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -enum pstate { - HW_PSTATE_INVALID = 0xff, - HW_PSTATE_0 = 0, - HW_PSTATE_1 = 1, - HW_PSTATE_2 = 2, - HW_PSTATE_3 = 3, - HW_PSTATE_4 = 4, - HW_PSTATE_5 = 5, - HW_PSTATE_6 = 6, - HW_PSTATE_7 = 7, -}; - -struct powernow_k8_data { - unsigned int cpu; - - u32 numps; /* number of p-states */ - u32 batps; /* number of p-states supported on battery */ - u32 max_hw_pstate; /* maximum legal hardware pstate */ - - /* these values are constant when the PSB is used to determine - * vid/fid pairings, but are modified during the ->target() call - * when ACPI is used */ - u32 rvo; /* ramp voltage offset */ - u32 irt; /* isochronous relief time */ - u32 vidmvs; /* usable value calculated from mvs */ - u32 vstable; /* voltage stabilization time, units 20 us */ - u32 plllock; /* pll lock time, units 1 us */ - u32 exttype; /* extended interface = 1 */ - - /* keep track of the current fid / vid or pstate */ - u32 currvid; - u32 currfid; - enum pstate currpstate; - - /* the powernow_table includes all frequency and vid/fid pairings: - * fid are the lower 8 bits of the index, vid are the upper 8 bits. - * frequency is in kHz */ - struct cpufreq_frequency_table *powernow_table; - - /* the acpi table needs to be kept. it's only available if ACPI was - * used to determine valid frequency/vid/fid states */ - struct acpi_processor_performance acpi_data; - - /* we need to keep track of associated cores, but let cpufreq - * handle hotplug events - so just point at cpufreq pol->cpus - * structure */ - struct cpumask *available_cores; -}; - -/* processor's cpuid instruction support */ -#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ -#define CPUID_XFAM 0x0ff00000 /* extended family */ -#define CPUID_XFAM_K8 0 -#define CPUID_XMOD 0x000f0000 /* extended model */ -#define CPUID_XMOD_REV_MASK 0x000c0000 -#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ -#define CPUID_USE_XFAM_XMOD 0x00000f00 -#define CPUID_GET_MAX_CAPABILITIES 0x80000000 -#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 -#define P_STATE_TRANSITION_CAPABLE 6 - -/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ -/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ -/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ -/* the register number is placed in ecx, and the data is returned in edx:eax. */ - -#define MSR_FIDVID_CTL 0xc0010041 -#define MSR_FIDVID_STATUS 0xc0010042 - -/* Field definitions within the FID VID Low Control MSR : */ -#define MSR_C_LO_INIT_FID_VID 0x00010000 -#define MSR_C_LO_NEW_VID 0x00003f00 -#define MSR_C_LO_NEW_FID 0x0000003f -#define MSR_C_LO_VID_SHIFT 8 - -/* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff - -/* Field definitions within the FID VID Low Status MSR : */ -#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ -#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 -#define MSR_S_LO_MAX_FID 0x003f0000 -#define MSR_S_LO_START_FID 0x00003f00 -#define MSR_S_LO_CURRENT_FID 0x0000003f - -/* Field definitions within the FID VID High Status MSR : */ -#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 -#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 -#define MSR_S_HI_START_VID 0x00003f00 -#define MSR_S_HI_CURRENT_VID 0x0000003f -#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 - - -/* Hardware Pstate _PSS and MSR definitions */ -#define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_MASK 0x00000007 -#define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_PSTATE_MAX_MASK 0x000000f0 -#define HW_PSTATE_MAX_SHIFT 4 -#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ -#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ -#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ -#define MSR_PSTATE_CUR_LIMIT 0xc0010061 /* pstate current limit MSR */ - -/* define the two driver architectures */ -#define CPU_OPTERON 0 -#define CPU_HW_PSTATE 1 - - -/* - * There are restrictions frequencies have to follow: - * - only 1 entry in the low fid table ( <=1.4GHz ) - * - lowest entry in the high fid table must be >= 2 * the entry in the - * low fid table - * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry - * in the low fid table - * - the parts can only step at <= 200 MHz intervals, odd fid values are - * supported in revision G and later revisions. - * - lowest frequency must be >= interprocessor hypertransport link speed - * (only applies to MP systems obviously) - */ - -/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ -#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ -#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ - -#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ -#define HI_VCOFREQ_TABLE_BOTTOM 1600 - -#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ - -#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ -#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ - -#define MIN_FREQ 800 /* Min and max freqs, per spec */ -#define MAX_FREQ 5000 - -#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ -#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ - -#define VID_OFF 0x3f - -#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ - -#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ - -#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ -#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ - -/* - * Most values of interest are encoded in a single field of the _PSS - * entries: the "control" value. - */ - -#define IRT_SHIFT 30 -#define RVO_SHIFT 28 -#define EXT_TYPE_SHIFT 27 -#define PLL_L_SHIFT 20 -#define MVS_SHIFT 18 -#define VST_SHIFT 11 -#define VID_SHIFT 6 -#define IRT_MASK 3 -#define RVO_MASK 3 -#define EXT_TYPE_MASK 1 -#define PLL_L_MASK 0x7f -#define MVS_MASK 3 -#define VST_MASK 0x7f -#define VID_MASK 0x1f -#define FID_MASK 0x1f -#define EXT_VID_MASK 0x3f -#define EXT_FID_MASK 0x3f - - -/* - * Version 1.4 of the PSB table. This table is constructed by BIOS and is - * to tell the OS's power management driver which VIDs and FIDs are - * supported by this particular processor. - * If the data in the PSB / PST is wrong, then this driver will program the - * wrong values into hardware, which is very likely to lead to a crash. - */ - -#define PSB_ID_STRING "AMDK7PNOW!" -#define PSB_ID_STRING_LEN 10 - -#define PSB_VERSION_1_4 0x14 - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags1; - u16 vstable; - u8 flags2; - u8 num_tables; - u32 cpuid; - u8 plllocktime; - u8 maxfid; - u8 maxvid; - u8 numps; -}; - -/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ -struct pst_s { - u8 fid; - u8 vid; -}; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) - -static int core_voltage_pre_transition(struct powernow_k8_data *data, - u32 reqvid, u32 regfid); -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c deleted file mode 100644 index 435a996a613a..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * sc520_freq.c: cpufreq driver for the AMD Elan sc520 - * - * Copyright (C) 2005 Sean Young <sean@mess.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Based on elanfreq.c - * - * 2005-03-30: - initial revision - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> -#include <linux/timex.h> -#include <linux/io.h> - -#include <asm/msr.h> - -#define MMCR_BASE 0xfffef000 /* The default base address */ -#define OFFS_CPUCTL 0x2 /* CPU Control Register */ - -static __u8 __iomem *cpuctl; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "sc520_freq", msg) -#define PFX "sc520_freq: " - -static struct cpufreq_frequency_table sc520_freq_table[] = { - {0x01, 100000}, - {0x02, 133000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg = *cpuctl; - - switch (clockspeed_reg & 0x03) { - default: - printk(KERN_ERR PFX "error: cpuctl register has unexpected " - "value %02x\n", clockspeed_reg); - case 0x01: - return 100000; - case 0x02: - return 133000; - } -} - -static void sc520_freq_set_cpu_state(unsigned int state) -{ - - struct cpufreq_freqs freqs; - u8 clockspeed_reg; - - freqs.old = sc520_freq_get_cpu_frequency(0); - freqs.new = sc520_freq_table[state].frequency; - freqs.cpu = 0; /* AMD Elan is UP */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("attempting to set frequency to %i kHz\n", - sc520_freq_table[state].frequency); - - local_irq_disable(); - - clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; - - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - -static int sc520_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); -} - -static int sc520_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, sc520_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - sc520_freq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int sc520_freq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int result; - - /* capability check */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) - return -ENODEV; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = sc520_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); - - return 0; -} - - -static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -static struct freq_attr *sc520_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver sc520_freq_driver = { - .get = sc520_freq_get_cpu_frequency, - .verify = sc520_freq_verify, - .target = sc520_freq_target, - .init = sc520_freq_cpu_init, - .exit = sc520_freq_cpu_exit, - .name = "sc520_freq", - .owner = THIS_MODULE, - .attr = sc520_freq_attr, -}; - - -static int __init sc520_freq_init(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - int err; - - /* Test if we have the right hardware */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { - dprintk("no Elan SC520 processor found!\n"); - return -ENODEV; - } - cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if (!cpuctl) { - printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); - return -ENOMEM; - } - - err = cpufreq_register_driver(&sc520_freq_driver); - if (err) - iounmap(cpuctl); - - return err; -} - - -static void __exit sc520_freq_exit(void) -{ - cpufreq_unregister_driver(&sc520_freq_driver); - iounmap(cpuctl); -} - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sean Young <sean@mess.org>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); - -module_init(sc520_freq_init); -module_exit(sc520_freq_exit); - diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c deleted file mode 100644 index 9b1ff37de46a..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ /dev/null @@ -1,636 +0,0 @@ -/* - * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium - * M (part of the Centrino chipset). - * - * Since the original Pentium M, most new Intel CPUs support Enhanced - * SpeedStep. - * - * Despite the "SpeedStep" in the name, this is almost entirely unlike - * traditional SpeedStep. - * - * Modelled on speedstep.c - * - * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> /* current */ -#include <linux/delay.h> -#include <linux/compiler.h> -#include <linux/gfp.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> - -#define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@vger.kernel.org" - -#define dprintk(msg...) \ - cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) - -#define INTEL_MSR_RANGE (0xffff) - -struct cpu_id -{ - __u8 x86; /* CPU family */ - __u8 x86_model; /* model */ - __u8 x86_mask; /* stepping */ -}; - -enum { - CPU_BANIAS, - CPU_DOTHAN_A1, - CPU_DOTHAN_A2, - CPU_DOTHAN_B0, - CPU_MP4HT_D0, - CPU_MP4HT_E0, -}; - -static const struct cpu_id cpu_ids[] = { - [CPU_BANIAS] = { 6, 9, 5 }, - [CPU_DOTHAN_A1] = { 6, 13, 1 }, - [CPU_DOTHAN_A2] = { 6, 13, 2 }, - [CPU_DOTHAN_B0] = { 6, 13, 6 }, - [CPU_MP4HT_D0] = {15, 3, 4 }, - [CPU_MP4HT_E0] = {15, 4, 1 }, -}; -#define N_IDS ARRAY_SIZE(cpu_ids) - -struct cpu_model -{ - const struct cpu_id *cpu_id; - const char *model_name; - unsigned max_freq; /* max clock in kHz */ - - struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ -}; -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, - const struct cpu_id *x); - -/* Operating points for current CPU */ -static DEFINE_PER_CPU(struct cpu_model *, centrino_model); -static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu); - -static struct cpufreq_driver centrino_driver; - -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE - -/* Computes the correct form for IA32_PERF_CTL MSR for a particular - frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ -#define OP(mhz, mv) \ - { \ - .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ - } - -/* - * These voltage tables were derived from the Intel Pentium M - * datasheet, document 25261202.pdf, Table 5. I have verified they - * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium - * M. - */ - -/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ -static struct cpufreq_frequency_table banias_900[] = -{ - OP(600, 844), - OP(800, 988), - OP(900, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ -static struct cpufreq_frequency_table banias_1000[] = -{ - OP(600, 844), - OP(800, 972), - OP(900, 988), - OP(1000, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ -static struct cpufreq_frequency_table banias_1100[] = -{ - OP( 600, 956), - OP( 800, 1020), - OP( 900, 1100), - OP(1000, 1164), - OP(1100, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - - -/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ -static struct cpufreq_frequency_table banias_1200[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP( 900, 1020), - OP(1000, 1100), - OP(1100, 1164), - OP(1200, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.30GHz (Banias) */ -static struct cpufreq_frequency_table banias_1300[] = -{ - OP( 600, 956), - OP( 800, 1260), - OP(1000, 1292), - OP(1200, 1356), - OP(1300, 1388), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.40GHz (Banias) */ -static struct cpufreq_frequency_table banias_1400[] = -{ - OP( 600, 956), - OP( 800, 1180), - OP(1000, 1308), - OP(1200, 1436), - OP(1400, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.50GHz (Banias) */ -static struct cpufreq_frequency_table banias_1500[] = -{ - OP( 600, 956), - OP( 800, 1116), - OP(1000, 1228), - OP(1200, 1356), - OP(1400, 1452), - OP(1500, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.60GHz (Banias) */ -static struct cpufreq_frequency_table banias_1600[] = -{ - OP( 600, 956), - OP( 800, 1036), - OP(1000, 1164), - OP(1200, 1276), - OP(1400, 1420), - OP(1600, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.70GHz (Banias) */ -static struct cpufreq_frequency_table banias_1700[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP(1000, 1116), - OP(1200, 1228), - OP(1400, 1308), - OP(1700, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; -#undef OP - -#define _BANIAS(cpuid, max, name) \ -{ .cpu_id = cpuid, \ - .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ - .max_freq = (max)*1000, \ - .op_points = banias_##max, \ -} -#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) - -/* CPU models, their operating frequency range, and freq/voltage - operating points */ -static struct cpu_model models[] = -{ - _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), - BANIAS(1000), - BANIAS(1100), - BANIAS(1200), - BANIAS(1300), - BANIAS(1400), - BANIAS(1500), - BANIAS(1600), - BANIAS(1700), - - /* NULL model_name is a wildcard */ - { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, - - { NULL, } -}; -#undef _BANIAS -#undef BANIAS - -static int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - struct cpu_model *model; - - for(model = models; model->cpu_id != NULL; model++) - if (centrino_verify_cpu_id(cpu, model->cpu_id) && - (model->model_name == NULL || - strcmp(cpu->x86_model_id, model->model_name) == 0)) - break; - - if (model->cpu_id == NULL) { - /* No match at all */ - dprintk("no support for CPU model \"%s\": " - "send /proc/cpuinfo to " MAINTAINER "\n", - cpu->x86_model_id); - return -ENOENT; - } - - if (model->op_points == NULL) { - /* Matched a non-match */ - dprintk("no table support for CPU model \"%s\"\n", - cpu->x86_model_id); - dprintk("try using the acpi-cpufreq driver\n"); - return -ENOENT; - } - - per_cpu(centrino_model, policy->cpu) = model; - - dprintk("found \"%s\": max frequency: %dkHz\n", - model->model_name, model->max_freq); - - return 0; -} - -#else -static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - return -ENODEV; -} -#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ - -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, - const struct cpu_id *x) -{ - if ((c->x86 == x->x86) && - (c->x86_model == x->x86_model) && - (c->x86_mask == x->x86_mask)) - return 1; - return 0; -} - -/* To be called only after centrino_model is initialized */ -static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) -{ - int i; - - /* - * Extract clock in kHz from PERF_CTL value - * for centrino, as some DSDTs are buggy. - * Ideally, this can be done using the acpi_data structure. - */ - if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) || - (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) || - (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) { - msr = (msr >> 8) & 0xff; - return msr * 100000; - } - - if ((!per_cpu(centrino_model, cpu)) || - (!per_cpu(centrino_model, cpu)->op_points)) - return 0; - - msr &= 0xffff; - for (i = 0; - per_cpu(centrino_model, cpu)->op_points[i].frequency - != CPUFREQ_TABLE_END; - i++) { - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) - return per_cpu(centrino_model, cpu)-> - op_points[i].frequency; - } - if (failsafe) - return per_cpu(centrino_model, cpu)->op_points[i-1].frequency; - else - return 0; -} - -/* Return the current CPU frequency in kHz */ -static unsigned int get_cur_freq(unsigned int cpu) -{ - unsigned l, h; - unsigned clock_freq; - - rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h); - clock_freq = extract_clock(l, cpu, 0); - - if (unlikely(clock_freq == 0)) { - /* - * On some CPUs, we can see transient MSR values (which are - * not present in _PSS), while CPU is doing some automatic - * P-state transition (like TM2). Get the last freq set - * in PERF_CTL. - */ - rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h); - clock_freq = extract_clock(l, cpu, 1); - } - return clock_freq; -} - - -static int centrino_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - unsigned freq; - unsigned l, h; - int ret; - int i; - - /* Only Intel makes Enhanced Speedstep-capable CPUs */ - if (cpu->x86_vendor != X86_VENDOR_INTEL || - !cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) - centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (policy->cpu != 0) - return -ENODEV; - - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i]; - - if (!per_cpu(centrino_cpu, policy->cpu)) { - dprintk("found unsupported CPU with " - "Enhanced SpeedStep: send /proc/cpuinfo to " - MAINTAINER "\n"); - return -ENODEV; - } - - if (centrino_cpu_init_table(policy)) { - return -ENODEV; - } - - /* Check to see if Enhanced SpeedStep is enabled, and try to - enable it if not. */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - - if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP; - dprintk("trying to enable Enhanced SpeedStep (%x)\n", l); - wrmsr(MSR_IA32_MISC_ENABLE, l, h); - - /* check to see if it stuck */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) { - printk(KERN_INFO PFX - "couldn't enable Enhanced SpeedStep\n"); - return -ENODEV; - } - } - - freq = get_cur_freq(policy->cpu); - policy->cpuinfo.transition_latency = 10000; - /* 10uS transition latency */ - policy->cur = freq; - - dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); - - ret = cpufreq_frequency_table_cpuinfo(policy, - per_cpu(centrino_model, policy->cpu)->op_points); - if (ret) - return (ret); - - cpufreq_frequency_table_get_attr( - per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu); - - return 0; -} - -static int centrino_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - - if (!per_cpu(centrino_model, cpu)) - return -ENODEV; - - cpufreq_frequency_table_put_attr(cpu); - - per_cpu(centrino_model, cpu) = NULL; - - return 0; -} - -/** - * centrino_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within this model's frequency range at least one - * border included. - */ -static int centrino_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - per_cpu(centrino_model, policy->cpu)->op_points); -} - -/** - * centrino_setpolicy - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int centrino_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; - struct cpufreq_freqs freqs; - int retval = 0; - unsigned int j, k, first_cpu, tmp; - cpumask_var_t covered_cpus; - - if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) - return -ENOMEM; - - if (unlikely(per_cpu(centrino_model, cpu) == NULL)) { - retval = -ENODEV; - goto out; - } - - if (unlikely(cpufreq_frequency_table_target(policy, - per_cpu(centrino_model, cpu)->op_points, - target_freq, - relation, - &newstate))) { - retval = -EINVAL; - goto out; - } - - first_cpu = 1; - for_each_cpu(j, policy->cpus) { - int good_cpu; - - /* cpufreq holds the hotplug lock, so we are safe here */ - if (!cpu_online(j)) - continue; - - /* - * Support for SMP systems. - * Make sure we are running on CPU that wants to change freq - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - good_cpu = cpumask_any_and(policy->cpus, - cpu_online_mask); - else - good_cpu = j; - - if (good_cpu >= nr_cpu_ids) { - dprintk("couldn't limit to CPUs in this domain\n"); - retval = -EAGAIN; - if (first_cpu) { - /* We haven't started the transition yet. */ - goto out; - } - break; - } - - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; - - if (first_cpu) { - rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); - if (msr == (oldmsr & 0xffff)) { - dprintk("no change needed - msr was and needs " - "to be %x\n", oldmsr); - retval = 0; - goto out; - } - - freqs.old = extract_clock(oldmsr, cpu, 0); - freqs.new = extract_clock(msr, cpu, 0); - - dprintk("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); - - for_each_cpu(k, policy->cpus) { - if (!cpu_online(k)) - continue; - freqs.cpu = k; - cpufreq_notify_transition(&freqs, - CPUFREQ_PRECHANGE); - } - - first_cpu = 0; - /* all but 16 LSB are reserved, treat them with care */ - oldmsr &= ~0xffff; - msr &= 0xffff; - oldmsr |= msr; - } - - wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - break; - - cpumask_set_cpu(j, covered_cpus); - } - - for_each_cpu(k, policy->cpus) { - if (!cpu_online(k)) - continue; - freqs.cpu = k; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - if (unlikely(retval)) { - /* - * We have failed halfway through the frequency change. - * We have sent callbacks to policy->cpus and - * MSRs have already been written on coverd_cpus. - * Best effort undo.. - */ - - for_each_cpu(j, covered_cpus) - wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h); - - tmp = freqs.new; - freqs.new = freqs.old; - freqs.old = tmp; - for_each_cpu(j, policy->cpus) { - if (!cpu_online(j)) - continue; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - } - retval = 0; - -out: - free_cpumask_var(covered_cpus); - return retval; -} - -static struct freq_attr* centrino_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver centrino_driver = { - .name = "centrino", /* should be speedstep-centrino, - but there's a 16 char limit */ - .init = centrino_cpu_init, - .exit = centrino_cpu_exit, - .verify = centrino_verify, - .target = centrino_target, - .get = get_cur_freq, - .attr = centrino_attr, - .owner = THIS_MODULE, -}; - - -/** - * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver - * - * Initializes the Enhanced SpeedStep support. Returns -ENODEV on - * unsupported devices, -ENOENT if there's no voltage table for this - * particular CPU model, -EINVAL on problems during initiatization, - * and zero on success. - * - * This is quite picky. Not only does the CPU have to advertise the - * "est" flag in the cpuid capability flags, we look for a specific - * CPU model and stepping, and we need to have the exact model name in - * our voltage tables. That is, be paranoid about not releasing - * someone's valuable magic smoke. - */ -static int __init centrino_init(void) -{ - struct cpuinfo_x86 *cpu = &cpu_data(0); - - if (!cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - return cpufreq_register_driver(¢rino_driver); -} - -static void __exit centrino_exit(void) -{ - cpufreq_unregister_driver(¢rino_driver); -} - -MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); -MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); -MODULE_LICENSE ("GPL"); - -late_initcall(centrino_init); -module_exit(centrino_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c deleted file mode 100644 index 561758e95180..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ /dev/null @@ -1,452 +0,0 @@ -/* - * (C) 2001 Dave Jones, Arjan van de ven. - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information, and on Intel documentation - * for chipsets ICH2-M and ICH3-M. - * - * Many thanks to Ducrot Bruno for finding and fixing the last - * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler - * for extensive testing. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/sched.h> - -#include "speedstep-lib.h" - - -/* speedstep_chipset: - * It is necessary to know which chipset is used. As accesses to - * this device occur at various places in this module, we need a - * static struct pci_dev * pointing to that device. - */ -static struct pci_dev *speedstep_chipset_dev; - - -/* speedstep_processor - */ -static enum speedstep_processor speedstep_processor; - -static u32 pmbase; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-ich", msg) - - -/** - * speedstep_find_register - read the PMBASE address - * - * Returns: -ENODEV if no register could be found - */ -static int speedstep_find_register(void) -{ - if (!speedstep_chipset_dev) - return -ENODEV; - - /* get PMBASE */ - pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); - if (!(pmbase & 0x01)) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - pmbase &= 0xFFFFFFFE; - if (!pmbase) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - dprintk("pmbase is 0x%x\n", pmbase); - return 0; -} - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - * Tries to change the SpeedStep state. Can be called from - * smp_call_function_single. - */ -static void speedstep_set_state(unsigned int state) -{ - u8 pm2_blk; - u8 value; - unsigned long flags; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - /* read state */ - value = inb(pmbase + 0x50); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - /* write new state */ - value &= 0xFE; - value |= state; - - dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); - - /* Disable bus master arbitration */ - pm2_blk = inb(pmbase + 0x20); - pm2_blk |= 0x01; - outb(pm2_blk, (pmbase + 0x20)); - - /* Actual transition */ - outb(value, (pmbase + 0x50)); - - /* Restore bus master arbitration */ - pm2_blk &= 0xfe; - outb(pm2_blk, (pmbase + 0x20)); - - /* check if transition was successful */ - value = inb(pmbase + 0x50); - - /* Enable IRQs */ - local_irq_restore(flags); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - if (state == (value & 0x1)) - dprintk("change to %u MHz succeeded\n", - speedstep_get_frequency(speedstep_processor) / 1000); - else - printk(KERN_ERR "cpufreq: change failed - I/O error\n"); - - return; -} - -/* Wrapper for smp_call_function_single. */ -static void _speedstep_set_state(void *_state) -{ - speedstep_set_state(*(unsigned int *)_state); -} - -/** - * speedstep_activate - activate SpeedStep control in the chipset - * - * Tries to activate the SpeedStep status and control registers. - * Returns -EINVAL on an unsupported chipset, and zero on success. - */ -static int speedstep_activate(void) -{ - u16 value = 0; - - if (!speedstep_chipset_dev) - return -EINVAL; - - pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); - if (!(value & 0x08)) { - value |= 0x08; - dprintk("activating SpeedStep (TM) registers\n"); - pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); - } - - return 0; -} - - -/** - * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic - * - * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to - * the LPC bridge / PM module which contains all power-management - * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected - * chipset, or zero on failure. - */ -static unsigned int speedstep_detect_chipset(void) -{ - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 4; /* 4-M */ - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 3; /* 3-M */ - - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) { - /* speedstep.c causes lockups on Dell Inspirons 8000 and - * 8100 which use a pretty old revision of the 82815 - * host brige. Abort on these systems. - */ - static struct pci_dev *hostbridge; - - hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, PCI_ANY_ID, - NULL); - - if (!hostbridge) - return 2; /* 2-M */ - - if (hostbridge->revision < 5) { - dprintk("hostbridge does not support speedstep\n"); - speedstep_chipset_dev = NULL; - pci_dev_put(hostbridge); - return 0; - } - - pci_dev_put(hostbridge); - return 2; /* 2-M */ - } - - return 0; -} - -static void get_freq_data(void *_speed) -{ - unsigned int *speed = _speed; - - *speed = speedstep_get_frequency(speedstep_processor); -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - unsigned int speed; - - /* You're supposed to ensure CPU is online. */ - if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) - BUG(); - - dprintk("detected %u kHz as current frequency\n", speed); - return speed; -} - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0, policy_cpu; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); - freqs.old = speedstep_get(policy_cpu); - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = policy->cpu; - - dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new); - - /* no transition necessary */ - if (freqs.old == freqs.new) - return 0; - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate, - true); - - for_each_cpu(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - -struct get_freqs { - struct cpufreq_policy *policy; - int ret; -}; - -static void get_freqs_on_cpu(void *_get_freqs) -{ - struct get_freqs *get_freqs = _get_freqs; - - get_freqs->ret = - speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, - &get_freqs->policy->cpuinfo.transition_latency, - &speedstep_set_state); -} - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int policy_cpu, speed; - struct get_freqs gf; - - /* only run on CPU to be set, or on its sibling */ -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); - - /* detect low and high frequency and transition latency */ - gf.policy = policy; - smp_call_function_single(policy_cpu, get_freqs_on_cpu, &gf, 1); - if (gf.ret) - return gf.ret; - - /* get current speed setting */ - speed = speedstep_get(policy_cpu); - if (!speed) - return -EIO; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-ich", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - /* detect processor */ - speedstep_processor = speedstep_detect_processor(); - if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor " - "not found\n"); - return -ENODEV; - } - - /* detect chipset */ - if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not " - "(yet) available.\n"); - return -ENODEV; - } - - /* activate speedstep support */ - if (speedstep_activate()) { - pci_dev_put(speedstep_chipset_dev); - return -EINVAL; - } - - if (speedstep_find_register()) - return -ENODEV; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - pci_dev_put(speedstep_chipset_dev); - cpufreq_unregister_driver(&speedstep_driver); -} - - -MODULE_AUTHOR("Dave Jones <davej@redhat.com>, " - "Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " - "with ICH-M southbridges."); -MODULE_LICENSE("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c deleted file mode 100644 index a94ec6be69fa..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <asm/tsc.h> -#include "speedstep-lib.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-lib", msg) - -#define PFX "speedstep-lib: " - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check; -#else -#define relaxed_check 0 -#endif - -/********************************************************************* - * GET PROCESSOR CORE SPEED IN KHZ * - *********************************************************************/ - -static unsigned int pentium3_get_frequency(enum speedstep_processor processor) -{ - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ - struct { - unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult[] = { - { 30, 0x01 }, - { 35, 0x05 }, - { 40, 0x02 }, - { 45, 0x06 }, - { 50, 0x00 }, - { 55, 0x04 }, - { 60, 0x0b }, - { 65, 0x0f }, - { 70, 0x09 }, - { 75, 0x0d }, - { 80, 0x0a }, - { 85, 0x26 }, - { 90, 0x20 }, - { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ - }; - - /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ - struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ - } msr_decode_fsb[] = { - { 66, 0x0 }, - { 100, 0x2 }, - { 133, 0x1 }, - { 0, 0xff} - }; - - u32 msr_lo, msr_tmp; - int i = 0, j = 0; - - /* read MSR 0x2a - we only need the low 32 bits */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - msr_tmp = msr_lo; - - /* decode the FSB */ - msr_tmp &= 0x00c0000; - msr_tmp >>= 18; - while (msr_tmp != msr_decode_fsb[i].bitmap) { - if (msr_decode_fsb[i].bitmap == 0xff) - return 0; - i++; - } - - /* decode the multiplier */ - if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { - dprintk("workaround for early PIIIs\n"); - msr_lo &= 0x03c00000; - } else - msr_lo &= 0x0bc00000; - msr_lo >>= 22; - while (msr_lo != msr_decode_mult[j].bitmap) { - if (msr_decode_mult[j].bitmap == 0xff) - return 0; - j++; - } - - dprintk("speed is %u\n", - (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - - return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; -} - - -static unsigned int pentiumM_get_frequency(void) -{ - u32 msr_lo, msr_tmp; - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - - /* see table B-2 of 24547212.pdf */ - if (msr_lo & 0x00040000) { - printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", - msr_lo, msr_tmp); - return 0; - } - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", - msr_tmp, (msr_tmp * 100 * 1000)); - - return msr_tmp * 100 * 1000; -} - -static unsigned int pentium_core_get_frequency(void) -{ - u32 fsb = 0; - u32 msr_lo, msr_tmp; - int ret; - - rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); - /* see table B-2 of 25366920.pdf */ - switch (msr_lo & 0x07) { - case 5: - fsb = 100000; - break; - case 1: - fsb = 133333; - break; - case 3: - fsb = 166667; - break; - case 2: - fsb = 200000; - break; - case 0: - fsb = 266667; - break; - case 4: - fsb = 333333; - break; - default: - printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); - } - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", - msr_lo, msr_tmp); - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", - msr_tmp, (msr_tmp * fsb)); - - ret = (msr_tmp * fsb); - return ret; -} - - -static unsigned int pentium4_get_frequency(void) -{ - struct cpuinfo_x86 *c = &boot_cpu_data; - u32 msr_lo, msr_hi, mult; - unsigned int fsb = 0; - unsigned int ret; - u8 fsb_code; - - /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency - * to System Bus Frequency Ratio Field in the Processor Frequency - * Configuration Register of the MSR. Therefore the current - * frequency cannot be calculated and has to be measured. - */ - if (c->x86_model < 2) - return cpu_khz; - - rdmsr(0x2c, msr_lo, msr_hi); - - dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - - /* decode the FSB: see IA-32 Intel (C) Architecture Software - * Developer's Manual, Volume 3: System Prgramming Guide, - * revision #12 in Table B-1: MSRs in the Pentium 4 and - * Intel Xeon Processors, on page B-4 and B-5. - */ - fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } - - if (!fsb) - printk(KERN_DEBUG PFX "couldn't detect FSB speed. " - "Please send an e-mail to <linux@brodo.de>\n"); - - /* Multiplier. */ - mult = msr_lo >> 24; - - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", - fsb, mult, (fsb * mult)); - - ret = (fsb * mult); - return ret; -} - - -/* Warning: may get called from smp_call_function_single. */ -unsigned int speedstep_get_frequency(enum speedstep_processor processor) -{ - switch (processor) { - case SPEEDSTEP_CPU_PCORE: - return pentium_core_get_frequency(); - case SPEEDSTEP_CPU_PM: - return pentiumM_get_frequency(); - case SPEEDSTEP_CPU_P4D: - case SPEEDSTEP_CPU_P4M: - return pentium4_get_frequency(); - case SPEEDSTEP_CPU_PIII_T: - case SPEEDSTEP_CPU_PIII_C: - case SPEEDSTEP_CPU_PIII_C_EARLY: - return pentium3_get_frequency(processor); - default: - return 0; - }; - return 0; -} -EXPORT_SYMBOL_GPL(speedstep_get_frequency); - - -/********************************************************************* - * DETECT SPEEDSTEP-CAPABLE PROCESSOR * - *********************************************************************/ - -unsigned int speedstep_detect_processor(void) -{ - struct cpuinfo_x86 *c = &cpu_data(0); - u32 ebx, msr_lo, msr_hi; - - dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - - if ((c->x86_vendor != X86_VENDOR_INTEL) || - ((c->x86 != 6) && (c->x86 != 0xF))) - return 0; - - if (c->x86 == 0xF) { - /* Intel Mobile Pentium 4-M - * or Intel Mobile Pentium 4 with 533 MHz FSB */ - if (c->x86_model != 2) - return 0; - - ebx = cpuid_ebx(0x00000001); - ebx &= 0x000000FF; - - dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); - - switch (c->x86_mask) { - case 4: - /* - * B-stepping [M-P4-M] - * sample has ebx = 0x0f, production has 0x0e. - */ - if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_CPU_P4M; - break; - case 7: - /* - * C-stepping [M-P4-M] - * needs to have ebx=0x0e, else it's a celeron: - * cf. 25130917.pdf / page 7, footnote 5 even - * though 25072120.pdf / page 7 doesn't say - * samples are only of B-stepping... - */ - if (ebx == 0x0e) - return SPEEDSTEP_CPU_P4M; - break; - case 9: - /* - * D-stepping [M-P4-M or M-P4/533] - * - * this is totally strange: CPUID 0x0F29 is - * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. - * The latter need to be sorted out as they don't - * support speedstep. - * Celerons with CPUID 0x0F29 may have either - * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything - * specific. - * M-P4-Ms may have either ebx=0xe or 0xf [see above] - * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] - * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id - * string - */ - if ((ebx == 0x0e) || - (strstr(c->x86_model_id, - "Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_CPU_P4M; - break; - default: - break; - } - return 0; - } - - switch (c->x86_model) { - case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, - * 0x06 for mobile PIII-M */ - ebx = cpuid_ebx(0x00000001); - dprintk("ebx is %x\n", ebx); - - ebx &= 0x000000FF; - - if (ebx != 0x06) - return 0; - - /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 - */ - return SPEEDSTEP_CPU_PIII_T; - - case 0x08: /* Intel PIII [Coppermine] */ - - /* all mobile PIII Coppermines have FSB 100 MHz - * ==> sort out a few desktop PIIIs. */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", - msr_lo, msr_hi); - msr_lo &= 0x00c0000; - if (msr_lo != 0x0080000) - return 0; - - /* - * If the processor is a mobile version, - * platform ID has bit 50 set - * it has SpeedStep technology if either - * bit 56 or 57 is set - */ - rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", - msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && - (relaxed_check ? 1 : (msr_hi & (3<<24)))) { - if (c->x86_mask == 0x01) { - dprintk("early PIII version\n"); - return SPEEDSTEP_CPU_PIII_C_EARLY; - } else - return SPEEDSTEP_CPU_PIII_C; - } - - default: - return 0; - } -} -EXPORT_SYMBOL_GPL(speedstep_detect_processor); - - -/********************************************************************* - * DETECT SPEEDSTEP SPEEDS * - *********************************************************************/ - -unsigned int speedstep_get_freqs(enum speedstep_processor processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)) -{ - unsigned int prev_speed; - unsigned int ret = 0; - unsigned long flags; - struct timeval tv1, tv2; - - if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) - return -EINVAL; - - dprintk("trying to determine both speeds\n"); - - /* get current speed */ - prev_speed = speedstep_get_frequency(processor); - if (!prev_speed) - return -EIO; - - dprintk("previous speed is %u\n", prev_speed); - - local_irq_save(flags); - - /* switch to low state */ - set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_frequency(processor); - if (!*low_speed) { - ret = -EIO; - goto out; - } - - dprintk("low speed is %u\n", *low_speed); - - /* start latency measurement */ - if (transition_latency) - do_gettimeofday(&tv1); - - /* switch to high state */ - set_state(SPEEDSTEP_HIGH); - - /* end latency measurement */ - if (transition_latency) - do_gettimeofday(&tv2); - - *high_speed = speedstep_get_frequency(processor); - if (!*high_speed) { - ret = -EIO; - goto out; - } - - dprintk("high speed is %u\n", *high_speed); - - if (*low_speed == *high_speed) { - ret = -ENODEV; - goto out; - } - - /* switch to previous state, if necessary */ - if (*high_speed != prev_speed) - set_state(SPEEDSTEP_LOW); - - if (transition_latency) { - *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC + - tv2.tv_usec - tv1.tv_usec; - dprintk("transition latency is %u uSec\n", *transition_latency); - - /* convert uSec to nSec and add 20% for safety reasons */ - *transition_latency *= 1200; - - /* check if the latency measurement is too high or too low - * and set it to a safe value (500uSec) in that case - */ - if (*transition_latency > 10000000 || - *transition_latency < 50000) { - printk(KERN_WARNING PFX "frequency transition " - "measured seems out of range (%u " - "nSec), falling back to a safe one of" - "%u nSec.\n", - *transition_latency, 500000); - *transition_latency = 500000; - } - } - -out: - local_irq_restore(flags); - return ret; -} -EXPORT_SYMBOL_GPL(speedstep_get_freqs); - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, - "Don't do all checks for speedstep capability."); -#endif - -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h deleted file mode 100644 index 70d9cea1219d..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - - -/* processors */ -enum speedstep_processor { - SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ - SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ - SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ - SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ -/* the following processors are not speedstep-capable and are not auto-detected - * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_frequency() call. */ - SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ - SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ - SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ -}; - -/* speedstep states -- only two of them */ - -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 - - -/* detect a speedstep-capable processor */ -extern enum speedstep_processor speedstep_detect_processor(void); - -/* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); - - -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no - * cpufreq_notify_transition calls are initiated. - */ -extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c deleted file mode 100644 index 91bc25b67bc1..000000000000 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ /dev/null @@ -1,467 +0,0 @@ -/* - * Intel SpeedStep SMI driver. - * - * (C) 2003 Hiroshi Miura <miura@da-cha.org> - * - * Licensed under the terms of the GNU GPL License version 2. - * - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <asm/ist.h> - -#include "speedstep-lib.h" - -/* speedstep system management interface port/command. - * - * These parameters are got from IST-SMI BIOS call. - * If user gives it, these are used. - * - */ -static int smi_port; -static int smi_cmd; -static unsigned int smi_sig; - -/* info about the processor */ -static enum speedstep_processor speedstep_processor; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -#define GET_SPEEDSTEP_OWNER 0 -#define GET_SPEEDSTEP_STATE 1 -#define SET_SPEEDSTEP_STATE 2 -#define GET_SPEEDSTEP_FREQS 4 - -/* how often shall the SMI call be tried if it failed, e.g. because - * of DMA activity going on? */ -#define SMI_TRIES 5 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ - "speedstep-smi", msg) - -/** - * speedstep_smi_ownership - */ -static int speedstep_smi_ownership(void) -{ - u32 command, result, magic, dummy; - u32 function = GET_SPEEDSTEP_OWNER; - unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - magic = virt_to_phys(magic_data); - - dprintk("trying to obtain ownership with command %x at port %x\n", - command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp\n" - : "=D" (result), - "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), - "=S" (dummy) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) - : "memory" - ); - - dprintk("result is %x\n", result); - - return result; -} - -/** - * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. - * @low: the low frequency value is placed here - * @high: the high frequency value is placed here - * - * Only available on later SpeedStep-enabled systems, returns false results or - * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing - * shows that the latter occurs if !(ist_info.event & 0xFFFF). - */ -static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) -{ - u32 command, result = 0, edi, high_mhz, low_mhz, dummy; - u32 state = 0; - u32 function = GET_SPEEDSTEP_FREQS; - - if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n"); - return -ENODEV; - } - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine frequencies with command %x at port %x\n", - command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp" - : "=a" (result), - "=b" (high_mhz), - "=c" (low_mhz), - "=d" (state), "=D" (edi), "=S" (dummy) - : "a" (command), - "b" (function), - "c" (state), - "d" (smi_port), "S" (0), "D" (0) - ); - - dprintk("result %x, low_freq %u, high_freq %u\n", - result, low_mhz, high_mhz); - - /* abort if results are obviously incorrect... */ - if ((high_mhz + low_mhz) < 600) - return -EINVAL; - - *high = high_mhz * 1000; - *low = low_mhz * 1000; - - return result; -} - -/** - * speedstep_get_state - set the SpeedStep state - * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static int speedstep_get_state(void) -{ - u32 function = GET_SPEEDSTEP_STATE; - u32 result, state, edi, command, dummy; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine current setting with command %x " - "at port %x\n", command, smi_port); - - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp\n" - : "=a" (result), - "=b" (state), "=D" (edi), - "=c" (dummy), "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (0), - "d" (smi_port), "S" (0), "D" (0) - ); - - dprintk("state is %x, result is %x\n", state, result); - - return state & 1; -} - - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static void speedstep_set_state(unsigned int state) -{ - unsigned int result = 0, command, new_state, dummy; - unsigned long flags; - unsigned int function = SET_SPEEDSTEP_STATE; - unsigned int retry = 0; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to set frequency to state %u " - "with command %x at port %x\n", - state, command, smi_port); - - do { - if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", - retry, result); - mdelay(retry * 50); - } - retry++; - __asm__ __volatile__( - "push %%ebp\n" - "out %%al, (%%dx)\n" - "pop %%ebp" - : "=b" (new_state), "=D" (result), - "=c" (dummy), "=a" (dummy), - "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), - "d" (smi_port), "S" (0), "D" (0) - ); - } while ((new_state != state) && (retry <= SMI_TRIES)); - - /* enable IRQs */ - local_irq_restore(flags); - - if (new_state == state) - dprintk("change to %u MHz succeeded after %u tries " - "with result %u\n", - (speedstep_freqs[new_state].frequency / 1000), - retry, result); - else - printk(KERN_ERR "cpufreq: change to state %u " - "failed with new_state %u and result %u\n", - state, new_state, result); - - return; -} - - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: new freq - * @relation: - * - * Sets a new CPUFreq policy/freq. - */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = speedstep_freqs[speedstep_get_state()].frequency; - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = 0; /* speedstep.c is UP only driver */ - - if (freqs.old == freqs.new) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - speedstep_set_state(newstate); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int speed, state; - unsigned int *low, *high; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - result = speedstep_smi_ownership(); - if (result) { - dprintk("fails in acquiring ownership of a SMI interface.\n"); - return -EINVAL; - } - - /* detect low and high frequency */ - low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; - high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; - - result = speedstep_smi_get_freqs(low, high); - if (result) { - /* fall back to speedstep_lib.c dection mechanism: - * try both states out */ - dprintk("could not detect low and high frequencies " - "by SMI call.\n"); - result = speedstep_get_freqs(speedstep_processor, - low, high, - NULL, - &speedstep_set_state); - - if (result) { - dprintk("could not detect two different speeds" - " -- aborting.\n"); - return result; - } else - dprintk("workaround worked.\n"); - } - - /* get current speed setting */ - state = speedstep_get_state(); - speed = speedstep_freqs[state].frequency; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - if (cpu) - return -ENODEV; - return speedstep_get_frequency(speedstep_processor); -} - - -static int speedstep_resume(struct cpufreq_policy *policy) -{ - int result = speedstep_smi_ownership(); - - if (result) - dprintk("fails in re-acquiring ownership of a SMI interface.\n"); - - return result; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .resume = speedstep_resume, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * BIOS, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - speedstep_processor = speedstep_detect_processor(); - - switch (speedstep_processor) { - case SPEEDSTEP_CPU_PIII_T: - case SPEEDSTEP_CPU_PIII_C: - case SPEEDSTEP_CPU_PIII_C_EARLY: - break; - default: - speedstep_processor = 0; - } - - if (!speedstep_processor) { - dprintk("No supported Intel CPU detected.\n"); - return -ENODEV; - } - - dprintk("signature:0x%.8lx, command:0x%.8lx, " - "event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, - ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM - sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( - (smi_port == 0) || (smi_cmd == 0))) - return -ENODEV; - - if (smi_sig == 1) - smi_sig = 0x47534943; - else - smi_sig = ist_info.signature; - - /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) - return -EINVAL; - else if (smi_port == 0) - smi_port = ist_info.command & 0xff; - - if ((smi_cmd > 0xff) || (smi_cmd < 0)) - return -EINVAL; - else if (smi_cmd == 0) - smi_cmd = (ist_info.command >> 16) & 0xff; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - cpufreq_unregister_driver(&speedstep_driver); -} - -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); - -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " - "-- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " - "-- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " - "SMI interface."); - -MODULE_AUTHOR("Hiroshi Miura"); -MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index df86bc8c859d..1edf5ba4fb2b 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -29,10 +29,10 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { + u64 misc_enable; + /* Unmask CPUID levels if masked: */ if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { - u64 misc_enable; - rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) { @@ -118,8 +118,6 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) * (model 2) with the same problem. */ if (c->x86 == 15) { - u64 misc_enable; - rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); if (misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING) { @@ -130,6 +128,19 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) } } #endif + + /* + * If fast string is not enabled in IA32_MISC_ENABLE for any reason, + * clear the fast string and enhanced fast string CPU capabilities. + */ + if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { + rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); + if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) { + printk(KERN_INFO "Disabled fast string operations\n"); + setup_clear_cpu_cap(X86_FEATURE_REP_GOOD); + setup_clear_cpu_cap(X86_FEATURE_ERMS); + } + } } #ifdef CONFIG_X86_32 @@ -400,12 +411,10 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) switch (c->x86_model) { case 5: - if (c->x86_mask == 0) { - if (l2 == 0) - p = "Celeron (Covington)"; - else if (l2 == 256) - p = "Mobile Pentium II (Dixon)"; - } + if (l2 == 0) + p = "Celeron (Covington)"; + else if (l2 == 256) + p = "Mobile Pentium II (Dixon)"; break; case 6: diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 1ce1af2899df..c105c533ed94 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -327,7 +327,6 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3) l3->subcaches[2] = sc2 = !(val & BIT(8)) + !(val & BIT(9)); l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13)); - l3->indices = (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1; l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1; } @@ -454,27 +453,16 @@ int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot, { int ret = 0; -#define SUBCACHE_MASK (3UL << 20) -#define SUBCACHE_INDEX 0xfff - - /* - * check whether this slot is already used or - * the index is already disabled - */ + /* check if @slot is already used or the index is already disabled */ ret = amd_get_l3_disable_slot(l3, slot); if (ret >= 0) return -EINVAL; - /* - * check whether the other slot has disabled the - * same index already - */ - if (index == amd_get_l3_disable_slot(l3, !slot)) + if (index > l3->indices) return -EINVAL; - /* do not allow writes outside of allowed bits */ - if ((index & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) || - ((index & SUBCACHE_INDEX) > l3->indices)) + /* check whether the other slot has disabled the same index already */ + if (index == amd_get_l3_disable_slot(l3, !slot)) return -EINVAL; amd_l3_disable_index(l3, cpu, slot, index); diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 3385ea26f684..ff1ae9b6464d 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -105,20 +105,6 @@ static int cpu_missing; ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain); EXPORT_SYMBOL_GPL(x86_mce_decoder_chain); -static int default_decode_mce(struct notifier_block *nb, unsigned long val, - void *data) -{ - pr_emerg(HW_ERR "No human readable MCE decoding support on this CPU type.\n"); - pr_emerg(HW_ERR "Run the message through 'mcelog --ascii' to decode.\n"); - - return NOTIFY_STOP; -} - -static struct notifier_block mce_dec_nb = { - .notifier_call = default_decode_mce, - .priority = -1, -}; - /* MCA banks polled by the period polling timer for corrected events */ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL @@ -212,6 +198,8 @@ void mce_log(struct mce *mce) static void print_mce(struct mce *m) { + int ret = 0; + pr_emerg(HW_ERR "CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n", m->extcpu, m->mcgstatus, m->bank, m->status); @@ -239,7 +227,11 @@ static void print_mce(struct mce *m) * Print out human-readable details about the MCE error, * (if the CPU has an implementation for that) */ - atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m); + ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m); + if (ret == NOTIFY_STOP) + return; + + pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n"); } #define PANIC_TIMEOUT 5 /* 5 seconds */ @@ -590,7 +582,6 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) { mce_log(&m); atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m); - add_taint(TAINT_MACHINE_CHECK); } /* @@ -1722,8 +1713,6 @@ __setup("mce", mcheck_enable); int __init mcheck_init(void) { - atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb); - mcheck_intel_therm_init(); return 0; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 167f97b5596e..bb0adad35143 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -509,6 +509,7 @@ recurse: out_free: if (b) { kobject_put(&b->kobj); + list_del(&b->miscj); kfree(b); } return err; diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 6f8c5e9da97f..27c625178bf1 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -187,8 +187,6 @@ static int therm_throt_process(bool new_event, int event, int level) this_cpu, level == CORE_LEVEL ? "Core" : "Package", state->count); - - add_taint(TAINT_MACHINE_CHECK); return 1; } if (old_event) { @@ -355,7 +353,6 @@ static void notify_thresholds(__u64 msr_val) static void intel_thermal_interrupt(void) { __u64 msr_val; - struct cpuinfo_x86 *c = &cpu_data(smp_processor_id()); rdmsrl(MSR_IA32_THERM_STATUS, msr_val); @@ -367,19 +364,19 @@ static void intel_thermal_interrupt(void) CORE_LEVEL) != 0) mce_log_therm_throt_event(CORE_THROTTLED | msr_val); - if (cpu_has(c, X86_FEATURE_PLN)) + if (this_cpu_has(X86_FEATURE_PLN)) if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, CORE_LEVEL) != 0) mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val); - if (cpu_has(c, X86_FEATURE_PTS)) { + if (this_cpu_has(X86_FEATURE_PTS)) { rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT, THERMAL_THROTTLING_EVENT, PACKAGE_LEVEL) != 0) mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val); - if (cpu_has(c, X86_FEATURE_PLN)) + if (this_cpu_has(X86_FEATURE_PLN)) if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_POWER_LIMIT, POWER_LIMIT_EVENT, @@ -393,7 +390,6 @@ static void unexpected_thermal_interrupt(void) { printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n", smp_processor_id()); - add_taint(TAINT_MACHINE_CHECK); } static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt; @@ -446,18 +442,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c) */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = lvtthmr_init; /* * The initial value of thermal LVT entries on all APs always reads * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI * sequence to them and LVT registers are reset to 0s except for * the mask bits which are set to 1s when APs receive INIT IPI. - * Always restore the value that BIOS has programmed on AP based on - * BSP's info we saved since BIOS is always setting the same value - * for all threads/cores + * If BIOS takes over the thermal interrupt and sets its interrupt + * delivery mode to SMI (not fixed), it restores the value that the + * BIOS has programmed on AP based on BSP's info we saved since BIOS + * is always setting the same value for all threads/cores. */ - apic_write(APIC_LVTTHMR, lvtthmr_init); + if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED) + apic_write(APIC_LVTTHMR, lvtthmr_init); - h = lvtthmr_init; if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 632e5dc9c9c0..3a0338b4b179 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -31,6 +31,7 @@ #include <asm/nmi.h> #include <asm/compat.h> #include <asm/smp.h> +#include <asm/alternative.h> #if 0 #undef wrmsrl @@ -363,12 +364,18 @@ again: return new_raw_count; } -/* using X86_FEATURE_PERFCTR_CORE to later implement ALTERNATIVE() here */ static inline int x86_pmu_addr_offset(int index) { - if (boot_cpu_has(X86_FEATURE_PERFCTR_CORE)) - return index << 1; - return index; + int offset; + + /* offset = X86_FEATURE_PERFCTR_CORE ? index << 1 : index */ + alternative_io(ASM_NOP2, + "shll $1, %%eax", + X86_FEATURE_PERFCTR_CORE, + "=a" (offset), + "a" (index)); + + return offset; } static inline unsigned int x86_pmu_config_addr(int index) @@ -613,8 +620,8 @@ static int x86_setup_perfctr(struct perf_event *event) /* * Branch tracing: */ - if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) && - (hwc->sample_period == 1)) { + if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS && + !attr->freq && hwc->sample_period == 1) { /* BTS is not supported by this architecture. */ if (!x86_pmu.bts_active) return -EOPNOTSUPP; @@ -1288,6 +1295,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This generic handler doesn't seem to have any issues where the + * unmasking occurs so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + for (idx = 0; idx < x86_pmu.num_counters; idx++) { if (!test_bit(idx, cpuc->active_mask)) { /* @@ -1374,8 +1391,6 @@ perf_event_nmi_handler(struct notifier_block *self, return NOTIFY_DONE; } - apic_write(APIC_LVTPC, APIC_DM_NMI); - handled = x86_pmu.handle_irq(args->regs); if (!handled) return NOTIFY_DONE; @@ -1758,17 +1773,6 @@ static struct pmu pmu = { * callchain support */ -static void -backtrace_warning_symbol(void *data, char *msg, unsigned long symbol) -{ - /* Ignore warnings */ -} - -static void backtrace_warning(void *data, char *msg) -{ - /* Ignore warnings */ -} - static int backtrace_stack(void *data, char *name) { return 0; @@ -1782,8 +1786,6 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops backtrace_ops = { - .warning = backtrace_warning, - .warning_symbol = backtrace_warning_symbol, .stack = backtrace_stack, .address = backtrace_address, .walk_stack = print_context_stack_bp, diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index cf4e369cea67..fe29c1d2219e 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -96,12 +96,14 @@ static __initconst const u64 amd_hw_cache_event_ids */ static const u64 amd_perfmon_event_map[] = { - [PERF_COUNT_HW_CPU_CYCLES] = 0x0076, - [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, - [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080, - [PERF_COUNT_HW_CACHE_MISSES] = 0x0081, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2, - [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3, + [PERF_COUNT_HW_CPU_CYCLES] = 0x0076, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0080, + [PERF_COUNT_HW_CACHE_MISSES] = 0x0081, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2, + [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x00d0, /* "Decoder empty" event */ + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x00d1, /* "Dispatch stalls" event */ }; static u64 amd_pmu_event_map(int hw_event) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 43fa20b13817..41178c826c48 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -25,7 +25,7 @@ struct intel_percore { /* * Intel PerfMon, used on Core and later. */ -static const u64 intel_perfmon_event_map[] = +static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly = { [PERF_COUNT_HW_CPU_CYCLES] = 0x003c, [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, @@ -36,7 +36,7 @@ static const u64 intel_perfmon_event_map[] = [PERF_COUNT_HW_BUS_CYCLES] = 0x013c, }; -static struct event_constraint intel_core_event_constraints[] = +static struct event_constraint intel_core_event_constraints[] __read_mostly = { INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */ INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */ @@ -47,7 +47,7 @@ static struct event_constraint intel_core_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct event_constraint intel_core2_event_constraints[] = +static struct event_constraint intel_core2_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -70,7 +70,7 @@ static struct event_constraint intel_core2_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct event_constraint intel_nehalem_event_constraints[] = +static struct event_constraint intel_nehalem_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -86,19 +86,19 @@ static struct event_constraint intel_nehalem_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct extra_reg intel_nehalem_extra_regs[] = +static struct extra_reg intel_nehalem_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff), EVENT_EXTRA_END }; -static struct event_constraint intel_nehalem_percore_constraints[] = +static struct event_constraint intel_nehalem_percore_constraints[] __read_mostly = { INTEL_EVENT_CONSTRAINT(0xb7, 0), EVENT_CONSTRAINT_END }; -static struct event_constraint intel_westmere_event_constraints[] = +static struct event_constraint intel_westmere_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -110,7 +110,7 @@ static struct event_constraint intel_westmere_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct event_constraint intel_snb_event_constraints[] = +static struct event_constraint intel_snb_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -123,21 +123,21 @@ static struct event_constraint intel_snb_event_constraints[] = EVENT_CONSTRAINT_END }; -static struct extra_reg intel_westmere_extra_regs[] = +static struct extra_reg intel_westmere_extra_regs[] __read_mostly = { INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff), INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0xffff), EVENT_EXTRA_END }; -static struct event_constraint intel_westmere_percore_constraints[] = +static struct event_constraint intel_westmere_percore_constraints[] __read_mostly = { INTEL_EVENT_CONSTRAINT(0xb7, 0), INTEL_EVENT_CONSTRAINT(0xbb, 0), EVENT_CONSTRAINT_END }; -static struct event_constraint intel_gen_event_constraints[] = +static struct event_constraint intel_gen_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ @@ -184,26 +184,23 @@ static __initconst const u64 snb_hw_cache_event_ids }, }, [ C(LL ) ] = { - /* - * TBD: Need Off-core Response Performance Monitoring support - */ [ C(OP_READ) ] = { - /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_WRITE) ] = { - /* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_PREFETCH) ] = { - /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, }, [ C(DTLB) ] = { @@ -285,26 +282,26 @@ static __initconst const u64 westmere_hw_cache_event_ids }, [ C(LL ) ] = { [ C(OP_READ) ] = { - /* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, /* * Use RFO, not WRITEBACK, because a write miss would typically occur * on RFO. */ [ C(OP_WRITE) ] = { - /* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */ - [ C(RESULT_ACCESS) ] = 0x01bb, - /* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */ + /* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */ + [ C(RESULT_ACCESS) ] = 0x01b7, + /* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */ [ C(RESULT_MISS) ] = 0x01b7, }, [ C(OP_PREFETCH) ] = { - /* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */ + /* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */ [ C(RESULT_ACCESS) ] = 0x01b7, - /* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */ - [ C(RESULT_MISS) ] = 0x01bb, + /* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */ + [ C(RESULT_MISS) ] = 0x01b7, }, }, [ C(DTLB) ] = { @@ -352,16 +349,36 @@ static __initconst const u64 westmere_hw_cache_event_ids }; /* - * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3 + * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits; + * See IA32 SDM Vol 3B 30.6.1.3 */ -#define DMND_DATA_RD (1 << 0) -#define DMND_RFO (1 << 1) -#define DMND_WB (1 << 3) -#define PF_DATA_RD (1 << 4) -#define PF_DATA_RFO (1 << 5) -#define RESP_UNCORE_HIT (1 << 8) -#define RESP_MISS (0xf600) /* non uncore hit */ +#define NHM_DMND_DATA_RD (1 << 0) +#define NHM_DMND_RFO (1 << 1) +#define NHM_DMND_IFETCH (1 << 2) +#define NHM_DMND_WB (1 << 3) +#define NHM_PF_DATA_RD (1 << 4) +#define NHM_PF_DATA_RFO (1 << 5) +#define NHM_PF_IFETCH (1 << 6) +#define NHM_OFFCORE_OTHER (1 << 7) +#define NHM_UNCORE_HIT (1 << 8) +#define NHM_OTHER_CORE_HIT_SNP (1 << 9) +#define NHM_OTHER_CORE_HITM (1 << 10) + /* reserved */ +#define NHM_REMOTE_CACHE_FWD (1 << 12) +#define NHM_REMOTE_DRAM (1 << 13) +#define NHM_LOCAL_DRAM (1 << 14) +#define NHM_NON_DRAM (1 << 15) + +#define NHM_ALL_DRAM (NHM_REMOTE_DRAM|NHM_LOCAL_DRAM) + +#define NHM_DMND_READ (NHM_DMND_DATA_RD) +#define NHM_DMND_WRITE (NHM_DMND_RFO|NHM_DMND_WB) +#define NHM_DMND_PREFETCH (NHM_PF_DATA_RD|NHM_PF_DATA_RFO) + +#define NHM_L3_HIT (NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM) +#define NHM_L3_MISS (NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD) +#define NHM_L3_ACCESS (NHM_L3_HIT|NHM_L3_MISS) static __initconst const u64 nehalem_hw_cache_extra_regs [PERF_COUNT_HW_CACHE_MAX] @@ -370,16 +387,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs { [ C(LL ) ] = { [ C(OP_READ) ] = { - [ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = DMND_DATA_RD|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_READ|NHM_L3_MISS, }, [ C(OP_WRITE) ] = { - [ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = DMND_RFO|DMND_WB|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_WRITE|NHM_L3_MISS, }, [ C(OP_PREFETCH) ] = { - [ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT, - [ C(RESULT_MISS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS, + [ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS, + [ C(RESULT_MISS) ] = NHM_DMND_PREFETCH|NHM_L3_MISS, }, } }; @@ -933,6 +950,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This handler doesn't seem to have any issues with the unmasking + * so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + intel_pmu_disable_all(); handled = intel_pmu_drain_bts_buffer(); status = intel_pmu_get_status(); @@ -998,6 +1025,9 @@ intel_bts_constraints(struct perf_event *event) struct hw_perf_event *hwc = &event->hw; unsigned int hw_event, bts_event; + if (event->attr.freq) + return NULL; + hw_event = hwc->config & INTEL_ARCH_EVENT_MASK; bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS); @@ -1305,7 +1335,7 @@ static void intel_clovertown_quirks(void) * AJ106 could possibly be worked around by not allowing LBR * usage from PEBS, including the fixup. * AJ68 could possibly be worked around by always programming - * a pebs_event_reset[0] value and coping with the lost events. + * a pebs_event_reset[0] value and coping with the lost events. * * But taken together it might just make sense to not enable PEBS on * these chips. @@ -1409,6 +1439,23 @@ static __init int intel_pmu_init(void) x86_pmu.percore_constraints = intel_nehalem_percore_constraints; x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.extra_regs = intel_nehalem_extra_regs; + + /* UOPS_ISSUED.STALLED_CYCLES */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e; + /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1; + + if (ebx & 0x40) { + /* + * Erratum AAJ80 detected, we work it around by using + * the BR_MISP_EXEC.ANY event. This will over-count + * branch-misses, but it's still much better than the + * architectural event which is often completely bogus: + */ + intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89; + + pr_cont("erratum AAJ80 worked around, "); + } pr_cont("Nehalem events, "); break; @@ -1438,6 +1485,12 @@ static __init int intel_pmu_init(void) x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.pebs_constraints = intel_westmere_pebs_event_constraints; x86_pmu.extra_regs = intel_westmere_extra_regs; + + /* UOPS_ISSUED.STALLED_CYCLES */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e; + /* UOPS_EXECUTED.CORE_ACTIVE_CYCLES,c=1,i=1 */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x1803fb1; + pr_cont("Westmere events, "); break; @@ -1449,6 +1502,12 @@ static __init int intel_pmu_init(void) x86_pmu.event_constraints = intel_snb_event_constraints; x86_pmu.pebs_constraints = intel_snb_pebs_events; + + /* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x180010e; + /* UOPS_DISPATCHED.THREAD,c=1,i=1 to count stall cycles*/ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 0x18001b1; + pr_cont("SandyBridge events, "); break; diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index d1f77e2934a1..ead584fb6a7d 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -468,7 +468,7 @@ static struct p4_event_bind p4_event_bind_map[] = { .opcode = P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED), .escr_msr = { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 }, .escr_emask = - P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS), + P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS), .cntr = { {12, 13, 16}, {14, 15, 17} }, }, [P4_EVENT_X87_ASSIST] = { @@ -912,8 +912,7 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) int idx, handled = 0; u64 val; - data.addr = 0; - data.raw = NULL; + perf_sample_data_init(&data, 0); cpuc = &__get_cpu_var(cpu_hw_events); @@ -950,11 +949,20 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) x86_pmu_stop(event, 0); } - if (handled) { - /* p4 quirk: unmask it again */ - apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED); + if (handled) inc_irq_stat(apic_perf_irqs); - } + + /* + * When dealing with the unmasking of the LVTPC on P4 perf hw, it has + * been observed that the OVF bit flag has to be cleared first _before_ + * the LVTPC can be unmasked. + * + * The reason is the NMI line will continue to be asserted while the OVF + * bit is set. This causes a second NMI to generate if the LVTPC is + * unmasked before the OVF bit is cleared, leading to unknown NMI + * messages. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); return handled; } @@ -1188,7 +1196,7 @@ static __init int p4_pmu_init(void) { unsigned int low, high; - /* If we get stripped -- indexig fails */ + /* If we get stripped -- indexing fails */ BUILD_BUG_ON(ARCH_P4_MAX_CCCR > X86_PMC_MAX_GENERIC); rdmsr(MSR_IA32_MISC_ENABLE, low, high); diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 706a9fb46a58..e90f08458e6b 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -391,7 +391,7 @@ static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); - return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); + return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr); } static void __init ioapic_add_ofnode(struct device_node *np) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index e2a3f0606da4..1aae78f775fc 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -135,20 +135,6 @@ print_context_stack_bp(struct thread_info *tinfo, } EXPORT_SYMBOL_GPL(print_context_stack_bp); - -static void -print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) -{ - printk(data); - print_symbol(msg, symbol); - printk("\n"); -} - -static void print_trace_warning(void *data, char *msg) -{ - printk("%s%s\n", (char *)data, msg); -} - static int print_trace_stack(void *data, char *name) { printk("%s <%s> ", (char *)data, name); @@ -166,8 +152,6 @@ static void print_trace_address(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops print_trace_ops = { - .warning = print_trace_warning, - .warning_symbol = print_trace_warning_symbol, .stack = print_trace_stack, .address = print_trace_address, .walk_stack = print_context_stack, @@ -279,7 +263,6 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err) printk("DEBUG_PAGEALLOC"); #endif printk("\n"); - sysfs_printk_last_file(); if (notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP) return 1; diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index a93742a57468..0ba15a6cc57e 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -260,9 +260,9 @@ do_ftrace_mod_code(unsigned long ip, void *new_code) return mod_code_status; } -static unsigned char *ftrace_nop_replace(void) +static const unsigned char *ftrace_nop_replace(void) { - return ideal_nop5; + return ideal_nops[NOP_ATOMIC5]; } static int diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index d6d6bb361931..3bb08509a7a1 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -23,7 +23,6 @@ static void __init i386_default_early_setup(void) { /* Initialize 32bit specific setup functions */ - x86_init.resources.probe_roms = probe_roms; x86_init.resources.reserve_resources = i386_reserve_resources; x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc; diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index bfe8f729e086..6781765b3a0d 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -217,7 +217,7 @@ static void hpet_reserve_platform_timers(unsigned int id) { } /* * Common hpet info */ -static unsigned long hpet_period; +static unsigned long hpet_freq; static void hpet_legacy_set_mode(enum clock_event_mode mode, struct clock_event_device *evt); @@ -232,7 +232,6 @@ static struct clock_event_device hpet_clockevent = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = hpet_legacy_set_mode, .set_next_event = hpet_legacy_next_event, - .shift = 32, .irq = 0, .rating = 50, }; @@ -290,28 +289,12 @@ static void hpet_legacy_clockevent_register(void) hpet_enable_legacy_int(); /* - * The mult factor is defined as (include/linux/clockchips.h) - * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) - * hpet_period is in units of femtoseconds (per cycle), so - * mult/2^shift = cyc/ns = 10^6/hpet_period - * mult = (10^6 * 2^shift)/hpet_period - * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period - */ - hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, - hpet_period, hpet_clockevent.shift); - /* Calculate the min / max delta */ - hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, - &hpet_clockevent); - /* Setup minimum reprogramming delta. */ - hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, - &hpet_clockevent); - - /* * Start hpet with the boot cpu mask and make it * global after the IO_APIC has been initialized. */ hpet_clockevent.cpumask = cpumask_of(smp_processor_id()); - clockevents_register_device(&hpet_clockevent); + clockevents_config_and_register(&hpet_clockevent, hpet_freq, + HPET_MIN_PROG_DELTA, 0x7FFFFFFF); global_clock_event = &hpet_clockevent; printk(KERN_DEBUG "hpet clockevent registered\n"); } @@ -549,7 +532,6 @@ static int hpet_setup_irq(struct hpet_dev *dev) static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu) { struct clock_event_device *evt = &hdev->evt; - uint64_t hpet_freq; WARN_ON(cpu != smp_processor_id()); if (!(hdev->flags & HPET_DEV_VALID)) @@ -571,24 +553,10 @@ static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu) evt->set_mode = hpet_msi_set_mode; evt->set_next_event = hpet_msi_next_event; - evt->shift = 32; - - /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. - */ - hpet_freq = FSEC_PER_SEC; - do_div(hpet_freq, hpet_period); - evt->mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, evt->shift); - /* Calculate the max delta */ - evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt); - /* 5 usec minimum reprogramming delta. */ - evt->min_delta_ns = 5000; - evt->cpumask = cpumask_of(hdev->cpu); - clockevents_register_device(evt); + + clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA, + 0x7FFFFFFF); } #ifdef CONFIG_HPET @@ -792,7 +760,6 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { u64 start, now; - u64 hpet_freq; cycle_t t1; /* Start the counter */ @@ -819,24 +786,7 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* - * The definition of mult is (include/linux/clocksource.h) - * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc - * so we first need to convert hpet_period to ns/cyc units: - * mult/2^shift = ns/cyc = hpet_period/10^6 - * mult = (hpet_period * 2^shift)/10^6 - * mult = (hpet_period << shift)/FSEC_PER_NSEC - */ - - /* Need to convert hpet_period (fsec/cyc) to cyc/sec: - * - * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc) - * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period - */ - hpet_freq = FSEC_PER_SEC; - do_div(hpet_freq, hpet_period); clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); - return 0; } @@ -845,7 +795,9 @@ static int hpet_clocksource_register(void) */ int __init hpet_enable(void) { + unsigned long hpet_period; unsigned int id; + u64 freq; int i; if (!is_hpet_capable()) @@ -884,6 +836,14 @@ int __init hpet_enable(void) goto out_nohpet; /* + * The period is a femto seconds value. Convert it to a + * frequency. + */ + freq = FSEC_PER_SEC; + do_div(freq, hpet_period); + hpet_freq = freq; + + /* * Read the HPET ID register to retrieve the IRQ routing * information and the number of channels */ diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c index 2dfd31597443..fb66dc9e36cb 100644 --- a/arch/x86/kernel/i8253.c +++ b/arch/x86/kernel/i8253.c @@ -93,7 +93,6 @@ static struct clock_event_device pit_ce = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = init_pit_timer, .set_next_event = pit_next_event, - .shift = 32, .irq = 0, }; @@ -108,90 +107,12 @@ void __init setup_pit_timer(void) * IO_APIC has been initialized. */ pit_ce.cpumask = cpumask_of(smp_processor_id()); - pit_ce.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, pit_ce.shift); - pit_ce.max_delta_ns = clockevent_delta2ns(0x7FFF, &pit_ce); - pit_ce.min_delta_ns = clockevent_delta2ns(0xF, &pit_ce); - clockevents_register_device(&pit_ce); + clockevents_config_and_register(&pit_ce, CLOCK_TICK_RATE, 0xF, 0x7FFF); global_clock_event = &pit_ce; } #ifndef CONFIG_X86_64 -/* - * Since the PIT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t pit_read(struct clocksource *cs) -{ - static int old_count; - static u32 old_jifs; - unsigned long flags; - int count; - u32 jifs; - - raw_spin_lock_irqsave(&i8253_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - outb_pit(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_pit(PIT_CH0); /* read the latched count */ - count |= inb_pit(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_pit(0x34, PIT_MODE); - outb_pit(LATCH & 0xff, PIT_CH0); - outb_pit(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * It's possible for count to appear to go the wrong way for a - * couple of reasons: - * - * 1. The timer counter underflows, but we haven't handled the - * resulting interrupt and incremented jiffies yet. - * 2. Hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - * - * Previous attempts to handle these cases intelligently were - * buggy, so we just do the simple thing now. - */ - if (count > old_count && jifs == old_jifs) - count = old_count; - - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&i8253_lock, flags); - - count = (LATCH - 1) - count; - - return (cycle_t)(jifs * LATCH) + count; -} - -static struct clocksource pit_cs = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 20, -}; - static int __init init_pit_clocksource(void) { /* @@ -205,10 +126,7 @@ static int __init init_pit_clocksource(void) pit_ce.mode != CLOCK_EVT_MODE_PERIODIC) return 0; - pit_cs.mult = clocksource_hz2mult(CLOCK_TICK_RATE, pit_cs.shift); - - return clocksource_register(&pit_cs); + return clocksource_i8253_init(); } arch_initcall(init_pit_clocksource); - #endif /* !CONFIG_X86_64 */ diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 1cb0b9fc78dc..6c0802eb2f7f 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -249,7 +249,7 @@ void fixup_irqs(void) data = irq_desc_get_irq_data(desc); affinity = data->affinity; - if (!irq_has_action(irq) || + if (!irq_has_action(irq) || irqd_is_per_cpu(data) || cpumask_subset(affinity, cpu_online_mask)) { raw_spin_unlock(&desc->lock); continue; @@ -276,7 +276,8 @@ void fixup_irqs(void) else if (!(warned++)) set_affinity = 0; - if (!irqd_can_move_in_process_context(data) && chip->irq_unmask) + if (!irqd_can_move_in_process_context(data) && + !irqd_irq_disabled(data) && chip->irq_unmask) chip->irq_unmask(data); raw_spin_unlock(&desc->lock); diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c index 961b6b30ba90..3fee346ef545 100644 --- a/arch/x86/kernel/jump_label.c +++ b/arch/x86/kernel/jump_label.c @@ -34,7 +34,7 @@ void arch_jump_label_transform(struct jump_entry *entry, code.offset = entry->target - (entry->code + JUMP_LABEL_NOP_SIZE); } else - memcpy(&code, ideal_nop5, JUMP_LABEL_NOP_SIZE); + memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE); get_online_cpus(); mutex_lock(&text_mutex); text_poke_smp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE); @@ -44,7 +44,8 @@ void arch_jump_label_transform(struct jump_entry *entry, void arch_jump_label_text_poke_early(jump_label_t addr) { - text_poke_early((void *)addr, ideal_nop5, JUMP_LABEL_NOP_SIZE); + text_poke_early((void *)addr, ideal_nops[NOP_ATOMIC5], + JUMP_LABEL_NOP_SIZE); } #endif diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index c969fd9d1566..f1a6244d7d93 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -1183,12 +1183,13 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + unsigned long flags; /* This is possible if op is under delayed unoptimizing */ if (kprobe_disabled(&op->kp)) return; - preempt_disable(); + local_irq_save(flags); if (kprobe_running()) { kprobes_inc_nmissed_count(&op->kp); } else { @@ -1207,7 +1208,7 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op, opt_pre_handler(&op->kp, regs); __this_cpu_write(current_kprobe, NULL); } - preempt_enable_no_resched(); + local_irq_restore(flags); } static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index f98d3eafe07a..6389a6bca11b 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -26,8 +26,6 @@ #include <asm/x86_init.h> #include <asm/reboot.h> -#define KVM_SCALE 22 - static int kvmclock = 1; static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; @@ -120,8 +118,6 @@ static struct clocksource kvm_clock = { .read = kvm_clock_get_cycles, .rating = 400, .mask = CLOCKSOURCE_MASK(64), - .mult = 1 << KVM_SCALE, - .shift = KVM_SCALE, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -203,7 +199,7 @@ void __init kvmclock_init(void) machine_ops.crash_shutdown = kvm_crash_shutdown; #endif kvm_get_preset_lpj(); - clocksource_register(&kvm_clock); + clocksource_register_hz(&kvm_clock, NSEC_PER_SEC); pv_info.paravirt_enabled = 1; pv_info.name = "KVM"; diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c index ab23f1ad4bf1..52f256f2cc81 100644 --- a/arch/x86/kernel/module.c +++ b/arch/x86/kernel/module.c @@ -24,6 +24,7 @@ #include <linux/bug.h> #include <linux/mm.h> #include <linux/gfp.h> +#include <linux/jump_label.h> #include <asm/system.h> #include <asm/page.h> diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 5a532ce646bf..6f9bfffb2720 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -715,17 +715,15 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) } } -static int +static int __init check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) { - int ret = 0; - if (!mpc_new_phys || count <= mpc_new_length) { WARN(1, "update_mptable: No spare slots (length: %x)\n", count); return -1; } - return ret; + return 0; } #else /* CONFIG_X86_IO_APIC */ static diff --git a/arch/x86/kernel/pci-iommu_table.c b/arch/x86/kernel/pci-iommu_table.c index 55d745ec1181..35ccf75696eb 100644 --- a/arch/x86/kernel/pci-iommu_table.c +++ b/arch/x86/kernel/pci-iommu_table.c @@ -50,20 +50,14 @@ void __init check_iommu_entries(struct iommu_table_entry *start, struct iommu_table_entry *finish) { struct iommu_table_entry *p, *q, *x; - char sym_p[KSYM_SYMBOL_LEN]; - char sym_q[KSYM_SYMBOL_LEN]; /* Simple cyclic dependency checker. */ for (p = start; p < finish; p++) { q = find_dependents_of(start, finish, p); x = find_dependents_of(start, finish, q); if (p == x) { - sprint_symbol(sym_p, (unsigned long)p->detect); - sprint_symbol(sym_q, (unsigned long)q->detect); - - printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %s depends" \ - " on %s and vice-versa. BREAKING IT.\n", - sym_p, sym_q); + printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %pS depends on %pS and vice-versa. BREAKING IT.\n", + p->detect, q->detect); /* Heavy handed way..*/ x->depend = 0; } @@ -72,12 +66,8 @@ void __init check_iommu_entries(struct iommu_table_entry *start, for (p = start; p < finish; p++) { q = find_dependents_of(p, finish, p); if (q && q > p) { - sprint_symbol(sym_p, (unsigned long)p->detect); - sprint_symbol(sym_q, (unsigned long)q->detect); - - printk(KERN_ERR "EXECUTION ORDER INVALID! %s "\ - "should be called before %s!\n", - sym_p, sym_q); + printk(KERN_ERR "EXECUTION ORDER INVALID! %pS should be called before %pS!\n", + p->detect, q->detect); } } } diff --git a/arch/x86/kernel/probe_roms_32.c b/arch/x86/kernel/probe_roms.c index 071e7fea42e5..ba0a4cce53be 100644 --- a/arch/x86/kernel/probe_roms_32.c +++ b/arch/x86/kernel/probe_roms.c @@ -73,6 +73,107 @@ static struct resource video_rom_resource = { .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM }; +/* does this oprom support the given pci device, or any of the devices + * that the driver supports? + */ +static bool match_id(struct pci_dev *pdev, unsigned short vendor, unsigned short device) +{ + struct pci_driver *drv = pdev->driver; + const struct pci_device_id *id; + + if (pdev->vendor == vendor && pdev->device == device) + return true; + + for (id = drv ? drv->id_table : NULL; id && id->vendor; id++) + if (id->vendor == vendor && id->device == device) + break; + + return id && id->vendor; +} + +static bool probe_list(struct pci_dev *pdev, unsigned short vendor, + const unsigned char *rom_list) +{ + unsigned short device; + + do { + if (probe_kernel_address(rom_list, device) != 0) + device = 0; + + if (device && match_id(pdev, vendor, device)) + break; + + rom_list += 2; + } while (device); + + return !!device; +} + +static struct resource *find_oprom(struct pci_dev *pdev) +{ + struct resource *oprom = NULL; + int i; + + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources); i++) { + struct resource *res = &adapter_rom_resources[i]; + unsigned short offset, vendor, device, list, rev; + const unsigned char *rom; + + if (res->end == 0) + break; + + rom = isa_bus_to_virt(res->start); + if (probe_kernel_address(rom + 0x18, offset) != 0) + continue; + + if (probe_kernel_address(rom + offset + 0x4, vendor) != 0) + continue; + + if (probe_kernel_address(rom + offset + 0x6, device) != 0) + continue; + + if (match_id(pdev, vendor, device)) { + oprom = res; + break; + } + + if (probe_kernel_address(rom + offset + 0x8, list) == 0 && + probe_kernel_address(rom + offset + 0xc, rev) == 0 && + rev >= 3 && list && + probe_list(pdev, vendor, rom + offset + list)) { + oprom = res; + break; + } + } + + return oprom; +} + +void *pci_map_biosrom(struct pci_dev *pdev) +{ + struct resource *oprom = find_oprom(pdev); + + if (!oprom) + return NULL; + + return ioremap(oprom->start, resource_size(oprom)); +} +EXPORT_SYMBOL(pci_map_biosrom); + +void pci_unmap_biosrom(void __iomem *image) +{ + iounmap(image); +} +EXPORT_SYMBOL(pci_unmap_biosrom); + +size_t pci_biosrom_size(struct pci_dev *pdev) +{ + struct resource *oprom = find_oprom(pdev); + + return oprom ? resource_size(oprom) : 0; +} +EXPORT_SYMBOL(pci_biosrom_size); + #define ROMSIGNATURE 0xaa55 static int __init romsignature(const unsigned char *rom) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index d46cbe46b7ab..88a90a977f8e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -449,7 +449,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait); void mwait_idle_with_hints(unsigned long ax, unsigned long cx) { if (!need_resched()) { - if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR)) + if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); __monitor((void *)¤t_thread_info()->flags, 0, 0); @@ -465,7 +465,7 @@ static void mwait_idle(void) if (!need_resched()) { trace_power_start(POWER_CSTATE, 1, smp_processor_id()); trace_cpu_idle(1, smp_processor_id()); - if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR)) + if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR)) clflush((void *)¤t_thread_info()->flags); __monitor((void *)¤t_thread_info()->flags, 0, 0); diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 45892dc4b72a..f65e5b521dbd 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -608,6 +608,9 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data) unsigned len, type; struct perf_event *bp; + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; + data &= ~DR_CONTROL_RESERVED; old_dr7 = ptrace_get_dr7(thread->ptrace_bps); restore: @@ -655,6 +658,9 @@ restore: } goto restore; } + + ptrace_put_breakpoints(tsk); + return ((orig_ret < 0) ? orig_ret : rc); } @@ -668,10 +674,17 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n) if (n < HBP_NUM) { struct perf_event *bp; + + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; + bp = thread->ptrace_bps[n]; if (!bp) - return 0; - val = bp->hw.info.address; + val = 0; + else + val = bp->hw.info.address; + + ptrace_put_breakpoints(tsk); } else if (n == 6) { val = thread->debugreg6; } else if (n == 7) { @@ -686,6 +699,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, struct perf_event *bp; struct thread_struct *t = &tsk->thread; struct perf_event_attr attr; + int err = 0; + + if (ptrace_get_breakpoints(tsk) < 0) + return -ESRCH; if (!t->ptrace_bps[nr]) { ptrace_breakpoint_init(&attr); @@ -709,24 +726,23 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, * writing for the user. And anyway this is the previous * behaviour. */ - if (IS_ERR(bp)) - return PTR_ERR(bp); + if (IS_ERR(bp)) { + err = PTR_ERR(bp); + goto put; + } t->ptrace_bps[nr] = bp; } else { - int err; - bp = t->ptrace_bps[nr]; attr = bp->attr; attr.bp_addr = addr; err = modify_user_hw_breakpoint(bp, &attr); - if (err) - return err; } - - return 0; +put: + ptrace_put_breakpoints(tsk); + return err; } /* diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 08c44b08bf5b..0c016f727695 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -36,7 +36,7 @@ EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; static int reboot_mode; -enum reboot_type reboot_type = BOOT_KBD; +enum reboot_type reboot_type = BOOT_ACPI; int reboot_force; #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) @@ -478,9 +478,24 @@ void __attribute__((weak)) mach_reboot_fixups(void) { } +/* + * Windows compatible x86 hardware expects the following on reboot: + * + * 1) If the FADT has the ACPI reboot register flag set, try it + * 2) If still alive, write to the keyboard controller + * 3) If still alive, write to the ACPI reboot register again + * 4) If still alive, write to the keyboard controller again + * + * If the machine is still alive at this stage, it gives up. We default to + * following the same pattern, except that if we're still alive after (4) we'll + * try to force a triple fault and then cycle between hitting the keyboard + * controller and doing that + */ static void native_machine_emergency_restart(void) { int i; + int attempt = 0; + int orig_reboot_type = reboot_type; if (reboot_emergency) emergency_vmx_disable_all(); @@ -502,6 +517,13 @@ static void native_machine_emergency_restart(void) outb(0xfe, 0x64); /* pulse reset low */ udelay(50); } + if (attempt == 0 && orig_reboot_type == BOOT_ACPI) { + attempt = 1; + reboot_type = BOOT_ACPI; + } else { + reboot_type = BOOT_TRIPLE; + } + break; case BOOT_TRIPLE: load_idt(&no_idt); diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S index 29092b38d816..1d5c46df0d78 100644 --- a/arch/x86/kernel/reboot_32.S +++ b/arch/x86/kernel/reboot_32.S @@ -21,26 +21,26 @@ r_base = . /* Get our own relocated address */ call 1f 1: popl %ebx - subl $1b, %ebx + subl $(1b - r_base), %ebx /* Compute the equivalent real-mode segment */ movl %ebx, %ecx shrl $4, %ecx /* Patch post-real-mode segment jump */ - movw dispatch_table(%ebx,%eax,2),%ax - movw %ax, 101f(%ebx) - movw %cx, 102f(%ebx) + movw (dispatch_table - r_base)(%ebx,%eax,2),%ax + movw %ax, (101f - r_base)(%ebx) + movw %cx, (102f - r_base)(%ebx) /* Set up the IDT for real mode. */ - lidtl machine_real_restart_idt(%ebx) + lidtl (machine_real_restart_idt - r_base)(%ebx) /* * Set up a GDT from which we can load segment descriptors for real * mode. The GDT is not used in real mode; it is just needed here to * prepare the descriptors. */ - lgdtl machine_real_restart_gdt(%ebx) + lgdtl (machine_real_restart_gdt - r_base)(%ebx) /* * Load the data segment registers with 16-bit compatible values diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 4be9b398470e..c3050af9306d 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { - unsigned long flags; - #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -1041,9 +1039,7 @@ void __init setup_arch(char **cmdline_p) mcheck_init(); - local_irq_save(flags); - arch_init_ideal_nop5(); - local_irq_restore(flags); + arch_init_ideal_nops(); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 4fd173cd8e57..40a24932a8a1 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -601,10 +601,7 @@ long sys_rt_sigreturn(struct pt_regs *regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax)) goto badframe; @@ -682,6 +679,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { + sigset_t blocked; int ret; /* Are we from a system call? */ @@ -741,12 +739,10 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, */ regs->flags &= ~X86_EFLAGS_TF; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); + sigorsets(&blocked, ¤t->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + sigaddset(&blocked, sig); + set_current_blocked(&blocked); tracehook_signal_handler(sig, info, ka, regs, test_thread_flag(TIF_SINGLESTEP)); diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 513deac7228d..013e7eba83bb 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -194,14 +194,13 @@ static void native_stop_other_cpus(int wait) } /* - * Reschedule call back. Nothing to do, - * all the work is done automatically when - * we return from the interrupt. + * Reschedule call back. */ void smp_reschedule_interrupt(struct pt_regs *regs) { ack_APIC_irq(); inc_irq_stat(irq_resched_count); + scheduler_ipi(); /* * KVM uses this interrupt to force a cpu out of guest mode */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c2871d3c71b6..a3c430bdfb60 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1332,9 +1332,9 @@ static inline void mwait_play_dead(void) void *mwait_ptr; struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info); - if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c))) + if (!this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c)) return; - if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH)) + if (!this_cpu_has(X86_FEATURE_CLFLSH)) return; if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF) return; diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 6515733a289d..55d9bc03f696 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -9,15 +9,6 @@ #include <linux/uaccess.h> #include <asm/stacktrace.h> -static void save_stack_warning(void *data, char *msg) -{ -} - -static void -save_stack_warning_symbol(void *data, char *msg, unsigned long symbol) -{ -} - static int save_stack_stack(void *data, char *name) { return 0; @@ -53,16 +44,12 @@ save_stack_address_nosched(void *data, unsigned long addr, int reliable) } static const struct stacktrace_ops save_stack_ops = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, .stack = save_stack_stack, .address = save_stack_address, .walk_stack = print_context_stack, }; static const struct stacktrace_ops save_stack_ops_nosched = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, .stack = save_stack_stack, .address = save_stack_address_nosched, .walk_stack = print_context_stack, diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index abce34d5c79d..32cbffb0c494 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -344,3 +344,4 @@ ENTRY(sys_call_table) .long sys_open_by_handle_at .long sys_clock_adjtime .long sys_syncfs + .long sys_sendmmsg /* 345 */ diff --git a/arch/x86/kernel/test_nx.c b/arch/x86/kernel/test_nx.c index 787a5e499dd1..3f92ce07e525 100644 --- a/arch/x86/kernel/test_nx.c +++ b/arch/x86/kernel/test_nx.c @@ -161,7 +161,7 @@ static int test_NX(void) } #endif - return 0; + return ret; } static void test_exit(void) diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index c11514e9128b..6f164bd5e14d 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -35,7 +35,7 @@ void iommu_shutdown_noop(void) { } struct x86_init_ops x86_init __initdata = { .resources = { - .probe_roms = x86_init_noop, + .probe_roms = probe_roms, .reserve_resources = reserve_standard_io_resources, .memory_setup = default_machine_specific_memory_setup, }, @@ -61,6 +61,10 @@ struct x86_init_ops x86_init __initdata = { .banner = default_banner, }, + .mapping = { + .pagetable_reserve = native_pagetable_reserve, + }, + .paging = { .pagetable_setup_start = native_pagetable_setup_start, .pagetable_setup_done = native_pagetable_setup_done, |