1 files changed, 0 insertions, 114 deletions
diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h
deleted file mode 100644
index a3c1118e5b09..000000000000
--- a/arch/ppc/platforms/rpxclassic.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Classic board.  Copied from the RPX-Lite stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0x80000000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xe4000000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_ENFLSHSEL		((uint)0x04000000)
-#define BCSR0_FLASH_SEL		((uint)0x02000000)
-#define BCSR0_ENMONXCVR		((uint)0x01000000)
-
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)	/* CLLF */
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)	/* CLLF */
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)	/* CLLF */
-
-#define BCSR1_IPB5SEL           ((uint)0x00100000)
-#define BCSR1_PCVCTL4           ((uint)0x00080000)
-#define BCSR1_PCVCTL5           ((uint)0x00040000)
-#define BCSR1_PCVCTL6           ((uint)0x00020000)
-#define BCSR1_PCVCTL7           ((uint)0x00010000)
-
-#define BCSR2_EN232XCVR		((uint)0x00008000)
-#define BCSR2_QSPACESEL		((uint)0x00004000)
-#define BCSR2_FETHLEDMODE	((uint)0x00000800)	/* CLLF */
-
-/* define IO_BASE for pcmcia, CLLF only */
-#if !defined(CONFIG_PCI)
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-/* for pcmcia sandisk */
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-#endif
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* We don't use the 8259.
-*/
-
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */