diff options
Diffstat (limited to 'arch/powerpc/kernel/prom.c')
| -rw-r--r-- | arch/powerpc/kernel/prom.c | 89 |
1 files changed, 71 insertions, 18 deletions
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 3d30d40a0e9c..1eed87d954ba 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -30,8 +30,8 @@ #include <linux/libfdt.h> #include <linux/cpu.h> #include <linux/pgtable.h> +#include <linux/seq_buf.h> -#include <asm/prom.h> #include <asm/rtas.h> #include <asm/page.h> #include <asm/processor.h> @@ -45,7 +45,7 @@ #include <asm/iommu.h> #include <asm/btext.h> #include <asm/sections.h> -#include <asm/machdep.h> +#include <asm/setup.h> #include <asm/pci-bridge.h> #include <asm/kexec.h> #include <asm/opal.h> @@ -55,6 +55,7 @@ #include <asm/dt_cpu_ftrs.h> #include <asm/drmem.h> #include <asm/ultravisor.h> +#include <asm/prom.h> #include <mm/mmu_decl.h> @@ -137,7 +138,7 @@ static void __init move_device_tree(void) } /* - * ibm,pa-features is a per-cpu property that contains a string of + * ibm,pa/pi-features is a per-cpu property that contains a string of * attribute descriptors, each of which has a 2 byte header plus up * to 254 bytes worth of processor attribute bits. First header * byte specifies the number of bytes following the header. @@ -149,15 +150,17 @@ static void __init move_device_tree(void) * is supported/not supported. Note that the bit numbers are * big-endian to match the definition in PAPR. */ -static struct ibm_pa_feature { +struct ibm_feature { unsigned long cpu_features; /* CPU_FTR_xxx bit */ unsigned long mmu_features; /* MMU_FTR_xxx bit */ unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */ - unsigned char pabyte; /* byte number in ibm,pa-features */ + unsigned char pabyte; /* byte number in ibm,pa/pi-features */ unsigned char pabit; /* bit number (big-endian) */ unsigned char invert; /* if 1, pa bit set => clear feature */ -} ibm_pa_features[] __initdata = { +}; + +static struct ibm_feature ibm_pa_features[] __initdata = { { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU }, { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU }, { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL }, @@ -179,9 +182,19 @@ static struct ibm_pa_feature { { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 }, }; +/* + * ibm,pi-features property provides the support of processor specific + * options not described in ibm,pa-features. Right now use byte 0, bit 3 + * which indicates the occurrence of DSI interrupt when the paste operation + * on the suspended NX window. + */ +static struct ibm_feature ibm_pi_features[] __initdata = { + { .pabyte = 0, .pabit = 3, .mmu_features = MMU_FTR_NX_DSI }, +}; + static void __init scan_features(unsigned long node, const unsigned char *ftrs, unsigned long tablelen, - struct ibm_pa_feature *fp, + struct ibm_feature *fp, unsigned long ft_size) { unsigned long i, len, bit; @@ -218,17 +231,18 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs, } } -static void __init check_cpu_pa_features(unsigned long node) +static void __init check_cpu_features(unsigned long node, char *name, + struct ibm_feature *fp, + unsigned long size) { const unsigned char *pa_ftrs; int tablelen; - pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + pa_ftrs = of_get_flat_dt_prop(node, name, &tablelen); if (pa_ftrs == NULL) return; - scan_features(node, pa_ftrs, tablelen, - ibm_pa_features, ARRAY_SIZE(ibm_pa_features)); + scan_features(node, pa_ftrs, tablelen, fp, size); } #ifdef CONFIG_PPC_64S_HASH_MMU @@ -352,6 +366,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node, be32_to_cpu(intserv[found_thread])); boot_cpuid = found; + // Pass the boot CPU's hard CPU id back to our caller + *((u32 *)data) = be32_to_cpu(intserv[found_thread]); + /* * PAPR defines "logical" PVR values for cpus that * meet various levels of the architecture: @@ -373,11 +390,16 @@ static int __init early_init_dt_scan_cpus(unsigned long node, */ if (!dt_cpu_ftrs_in_use()) { prop = of_get_flat_dt_prop(node, "cpu-version", NULL); - if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) + if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) { identify_cpu(0, be32_to_cpup(prop)); + seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(prop)); + } check_cpu_feature_properties(node); - check_cpu_pa_features(node); + check_cpu_features(node, "ibm,pa-features", ibm_pa_features, + ARRAY_SIZE(ibm_pa_features)); + check_cpu_features(node, "ibm,pi-features", ibm_pi_features, + ARRAY_SIZE(ibm_pi_features)); } identical_pvr_fixup(node); @@ -388,9 +410,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; else if (!dt_cpu_ftrs_in_use()) cur_cpu_spec->cpu_features |= CPU_FTR_SMT; - allocate_paca(boot_cpuid); #endif - set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread])); return 0; } @@ -695,6 +715,23 @@ static void __init tm_init(void) static void tm_init(void) { } #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ +static int __init +early_init_dt_scan_model(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *prop; + + if (depth != 0) + return 0; + + prop = of_get_flat_dt_prop(node, "model", NULL); + if (prop) + seq_buf_printf(&ppc_hw_desc, "%s ", prop); + + /* break now */ + return 1; +} + #ifdef CONFIG_PPC64 static void __init save_fscr_to_task(void) { @@ -714,6 +751,7 @@ static inline void save_fscr_to_task(void) {} void __init early_init_devtree(void *params) { + u32 boot_cpu_hwid; phys_addr_t limit; DBG(" -> early_init_devtree(%px)\n", params); @@ -722,6 +760,8 @@ void __init early_init_devtree(void *params) if (!early_init_dt_verify(params)) panic("BUG: Failed verifying flat device tree, bad version?"); + of_scan_flat_dt(early_init_dt_scan_model, NULL); + #ifdef CONFIG_PPC_RTAS /* Some machines might need RTAS info for debugging, grab it now. */ of_scan_flat_dt(early_init_dt_scan_rtas, NULL); @@ -750,6 +790,13 @@ void __init early_init_devtree(void *params) early_init_dt_scan_root(); early_init_dt_scan_memory_ppc(); + /* + * As generic code authors expect to be able to use static keys + * in early_param() handlers, we initialize the static keys just + * before parsing early params (it's fine to call jump_label_init() + * more than once). + */ + jump_label_init(); parse_early_param(); /* make sure we've parsed cmdline for mem= before this */ @@ -790,16 +837,17 @@ void __init early_init_devtree(void *params) * FIXME .. and the initrd too? */ move_device_tree(); - allocate_paca_ptrs(); - DBG("Scanning CPUs ...\n"); dt_cpu_ftrs_scan(); + // We can now add the CPU name & PVR to the hardware description + seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR)); + /* Retrieve CPU related informations from the flat tree * (altivec support, boot CPU ID, ...) */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); + of_scan_flat_dt(early_init_dt_scan_cpus, &boot_cpu_hwid); if (boot_cpuid < 0) { printk("Failed to identify boot CPU !\n"); BUG(); @@ -816,6 +864,11 @@ void __init early_init_devtree(void *params) mmu_early_init_devtree(); + // NB. paca is not installed until later in early_setup() + allocate_paca_ptrs(); + allocate_paca(boot_cpuid); + set_hard_smp_processor_id(boot_cpuid, boot_cpu_hwid); + #ifdef CONFIG_PPC_POWERNV /* Scan and build the list of machine check recoverable ranges */ of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL); |