diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 60 |
1 files changed, 7 insertions, 53 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 8082b690e874..fa8e52a0239e 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -693,25 +693,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) .endm /* - * When the idle code in power4_idle puts the CPU into NAP mode, - * it has to do so in a loop, and relies on the external interrupt - * and decrementer interrupt entry code to get it out of the loop. - * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags - * to signal that it is in the loop and needs help to get out. - */ -#ifdef CONFIG_PPC_970_NAP -#define FINISH_NAP \ -BEGIN_FTR_SECTION \ - ld r11, PACA_THREAD_INFO(r13); \ - ld r9,TI_LOCAL_FLAGS(r11); \ - andi. r10,r9,_TLF_NAPPING; \ - bnel power4_fixup_nap; \ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) -#else -#define FINISH_NAP -#endif - -/* * There are a few constraints to be concerned with. * - Real mode exceptions code/data must be located at their physical location. * - Virtual mode exceptions must be mapped at their 0xc000... location. @@ -1248,7 +1229,6 @@ EXC_COMMON_BEGIN(machine_check_common) */ GEN_COMMON machine_check - FINISH_NAP /* Enable MSR_RI when finished with PACA_EXMC */ li r10,MSR_RI mtmsrd r10,1 @@ -1571,7 +1551,6 @@ EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100) EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100) EXC_COMMON_BEGIN(hardware_interrupt_common) GEN_COMMON hardware_interrupt - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD bl do_IRQ b interrupt_return @@ -1801,7 +1780,6 @@ EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80) EXC_VIRT_END(decrementer, 0x4900, 0x80) EXC_COMMON_BEGIN(decrementer_common) GEN_COMMON decrementer - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD bl timer_interrupt b interrupt_return @@ -1886,7 +1864,6 @@ EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100) EXC_VIRT_END(doorbell_super, 0x4a00, 0x100) EXC_COMMON_BEGIN(doorbell_super_common) GEN_COMMON doorbell_super - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_DOORBELL bl doorbell_exception @@ -2237,7 +2214,6 @@ EXC_COMMON_BEGIN(hmi_exception_early_common) EXC_COMMON_BEGIN(hmi_exception_common) GEN_COMMON hmi_exception - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD bl handle_hmi_exception b interrupt_return @@ -2266,7 +2242,6 @@ EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20) EXC_VIRT_END(h_doorbell, 0x4e80, 0x20) EXC_COMMON_BEGIN(h_doorbell_common) GEN_COMMON h_doorbell - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_PPC_DOORBELL bl doorbell_exception @@ -2299,7 +2274,6 @@ EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20) EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20) EXC_COMMON_BEGIN(h_virt_irq_common) GEN_COMMON h_virt_irq - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD bl do_IRQ b interrupt_return @@ -2345,7 +2319,6 @@ EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20) EXC_VIRT_END(performance_monitor, 0x4f00, 0x20) EXC_COMMON_BEGIN(performance_monitor_common) GEN_COMMON performance_monitor - FINISH_NAP addi r3,r1,STACK_FRAME_OVERHEAD bl performance_monitor_exception b interrupt_return @@ -2530,8 +2503,6 @@ EXC_VIRT_NONE(0x5100, 0x100) INT_DEFINE_BEGIN(cbe_system_error) IVEC=0x1200 IHSRR=1 - IKVM_SKIP=1 - IKVM_REAL=1 INT_DEFINE_END(cbe_system_error) EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100) @@ -2551,11 +2522,16 @@ EXC_REAL_NONE(0x1200, 0x100) EXC_VIRT_NONE(0x5200, 0x100) #endif - +/** + * Interrupt 0x1300 - Instruction Address Breakpoint Interrupt. + * This has been removed from the ISA before 2.01, which is the earliest + * 64-bit BookS ISA supported, however the G5 / 970 implements this + * interrupt with a non-architected feature available through the support + * processor interface. + */ INT_DEFINE_BEGIN(instruction_breakpoint) IVEC=0x1300 #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE - IKVM_SKIP=1 IKVM_REAL=1 #endif INT_DEFINE_END(instruction_breakpoint) @@ -2701,8 +2677,6 @@ EXC_COMMON_BEGIN(denorm_exception_common) INT_DEFINE_BEGIN(cbe_maintenance) IVEC=0x1600 IHSRR=1 - IKVM_SKIP=1 - IKVM_REAL=1 INT_DEFINE_END(cbe_maintenance) EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100) @@ -2754,8 +2728,6 @@ EXC_COMMON_BEGIN(altivec_assist_common) INT_DEFINE_BEGIN(cbe_thermal) IVEC=0x1800 IHSRR=1 - IKVM_SKIP=1 - IKVM_REAL=1 INT_DEFINE_END(cbe_thermal) EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100) @@ -3096,24 +3068,6 @@ USE_FIXED_SECTION(virt_trampolines) __end_interrupts: DEFINE_FIXED_SYMBOL(__end_interrupts) -#ifdef CONFIG_PPC_970_NAP - /* - * Called by exception entry code if _TLF_NAPPING was set, this clears - * the NAPPING flag, and redirects the exception exit to - * power4_fixup_nap_return. - */ - .globl power4_fixup_nap -EXC_COMMON_BEGIN(power4_fixup_nap) - andc r9,r9,r10 - std r9,TI_LOCAL_FLAGS(r11) - LOAD_REG_ADDR(r10, power4_idle_nap_return) - std r10,_NIP(r1) - blr - -power4_idle_nap_return: - blr -#endif - CLOSE_FIXED_SECTION(real_vectors); CLOSE_FIXED_SECTION(real_trampolines); CLOSE_FIXED_SECTION(virt_vectors); |