diff options
Diffstat (limited to 'arch/arm64/boot/dts/nvidia/tegra132-norrin.dts')
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 399 |
1 files changed, 230 insertions, 169 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 9f3206c63900..6e5f8465669e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -39,6 +39,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; + vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; @@ -671,7 +674,7 @@ regulator-boot-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -781,7 +784,6 @@ battery: smart-battery { compatible = "sbs,sbs-battery"; reg = <0xb>; - battery-name = "battery"; sbs,i2c-retry-count = <2>; sbs,poll-retry-count = <10>; /* power-supplies = <&charger>; */ @@ -893,13 +895,108 @@ nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; }; + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + + status = "okay"; + }; + + padctl@7009f000 { + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_run_cam>; + }; + + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb3_vbus>; + }; + + usb3-0 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + }; + }; + /* WIFI/BT module */ - sdhci@700b0000 { + mmc@700b0000 { status = "disabled"; }; /* external SD/MMC */ - sdhci@700b0400 { + mmc@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; @@ -909,39 +1006,12 @@ }; /* EMMC 4.51 */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; - usb@7d000000 { - status = "okay"; - }; - - usb-phy@7d000000 { - status = "okay"; - vbus-supply = <&vdd_usb1_vbus>; - }; - - usb@7d004000 { - status = "okay"; - }; - - usb-phy@7d004000 { - status = "okay"; - vbus-supply = <&vdd_run_cam>; - }; - - usb@7d008000 { - status = "okay"; - }; - - usb-phy@7d008000 { - status = "okay"; - vbus-supply = <&vdd_usb3_vbus>; - }; - backlight: backlight { compatible = "pwm-backlight"; @@ -955,17 +1025,10 @@ backlight-boot-off; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { @@ -991,146 +1054,144 @@ panel: panel { compatible = "innolux,n116bge"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <19000000>; + regulator-max-microvolt = <19000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <19000000>; - regulator-max-microvolt = <19000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; + vdd_usb1_vbus: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb1_vbus: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb3_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb3_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_3v3_panel: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_panel: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_hdmi_pll: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; - vdd_hdmi_pll: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; + vdd_5v0_hdmi: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_5v0_hdmi: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_ts: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "+5V_VDD_TS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_5v0_ts: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+5V_VDD_TS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_3v3_lp0: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; }; }; |