diff options
Diffstat (limited to 'arch/arm/mach-pxa')
101 files changed, 3095 insertions, 817 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 8eea7306f29b..33214c1e0607 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -40,6 +40,9 @@ choice config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" +config GUMSTIX_AM300EPD + bool "Enable AM300EPD board support" + endchoice config MACH_INTELMOTE2 @@ -254,6 +257,10 @@ config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x +config MACH_EXEDA + bool "CompuLab eXeda platform" + select PXA27x + config MACH_COLIBRI bool "Toradex Colibri PX27x" select PXA27x @@ -295,8 +302,15 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT + select PXA_SSP + select HAVE_PWM select PXA_HAVE_BOARD_IRQS +config MACH_HIMALAYA + bool "HTC Himalaya Support" + select CPU_PXA26x + select FB_W100 + config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x @@ -319,6 +333,16 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMT5 + bool "Palm Tungsten|T5" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm Tungsten|T5 + handheld computer. + config MACH_PALMTX bool "Palm T|X" default y @@ -339,6 +363,16 @@ config MACH_PALMZ72 Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. +config MACH_PALMLD + bool "Palm LifeDrive" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 7b28bb561d63..361fcfa7531a 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o # Specific board support obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o +obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o @@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o +obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o obj-$(CONFIG_MACH_E330) += e330.o @@ -53,7 +55,9 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o obj-$(CONFIG_ARCH_VIPER) += viper.o diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c index 77ee80e5e47b..3499fada73ae 100644 --- a/arch/arm/mach-pxa/am200epd.c +++ b/arch/arm/mach-pxa/am200epd.c @@ -30,8 +30,8 @@ #include <linux/irq.h> #include <linux/gpio.h> +#include <mach/pxa25x.h> #include <mach/gumstix.h> -#include <mach/mfp-pxa25x.h> #include <mach/pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c new file mode 100644 index 000000000000..4bd10a17332e --- /dev/null +++ b/arch/arm/mach-pxa/am300epd.c @@ -0,0 +1,295 @@ +/* + * am300epd.c -- Platform device for AM300 EPD kit + * + * Copyright (C) 2008, Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * This work was made possible by help and equipment support from E-Ink + * Corporation. http://support.eink.com/community + * + * This driver is written to be used with the Broadsheet display controller. + * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600 + * Vizplex EPD on a Gumstix board using the Broadsheet interface board. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <mach/gumstix.h> +#include <mach/mfp-pxa25x.h> +#include <mach/pxafb.h> + +#include "generic.h" + +#include <video/broadsheetfb.h> + +static unsigned int panel_type = 6; +static struct platform_device *am300_device; +static struct broadsheet_board am300_board; + +static unsigned long am300_pin_config[] __initdata = { + GPIO16_GPIO, + GPIO17_GPIO, + GPIO32_GPIO, + GPIO48_GPIO, + GPIO49_GPIO, + GPIO51_GPIO, + GPIO74_GPIO, + GPIO75_GPIO, + GPIO76_GPIO, + GPIO77_GPIO, + + /* this is the 16-bit hdb bus 58-73 */ + GPIO58_GPIO, + GPIO59_GPIO, + GPIO60_GPIO, + GPIO61_GPIO, + + GPIO62_GPIO, + GPIO63_GPIO, + GPIO64_GPIO, + GPIO65_GPIO, + + GPIO66_GPIO, + GPIO67_GPIO, + GPIO68_GPIO, + GPIO69_GPIO, + + GPIO70_GPIO, + GPIO71_GPIO, + GPIO72_GPIO, + GPIO73_GPIO, +}; + +/* register offsets for gpio control */ +#define PWR_GPIO_PIN 16 +#define CFG_GPIO_PIN 17 +#define RDY_GPIO_PIN 32 +#define DC_GPIO_PIN 48 +#define RST_GPIO_PIN 49 +#define LED_GPIO_PIN 51 +#define RD_GPIO_PIN 74 +#define WR_GPIO_PIN 75 +#define CS_GPIO_PIN 76 +#define IRQ_GPIO_PIN 77 + +/* hdb bus */ +#define DB0_GPIO_PIN 58 +#define DB15_GPIO_PIN 73 + +static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN, + RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN, + IRQ_GPIO_PIN, LED_GPIO_PIN }; +static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR", + "CS", "IRQ", "LED" }; + +static int am300_wait_event(struct broadsheetfb_par *par) +{ + /* todo: improve err recovery */ + wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN)); + return 0; +} + +static int am300_init_gpio_regs(struct broadsheetfb_par *par) +{ + int i; + int err; + char dbname[8]; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + err = gpio_request(gpios[i], gpio_names[i]); + if (err) { + dev_err(&am300_device->dev, "failed requesting " + "gpio %s, err=%d\n", gpio_names[i], err); + goto err_req_gpio; + } + } + + /* we also need to take care of the hdb bus */ + for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) { + sprintf(dbname, "DB%d", i); + err = gpio_request(i, dbname); + if (err) { + dev_err(&am300_device->dev, "failed requesting " + "gpio %d, err=%d\n", i, err); + while (i >= DB0_GPIO_PIN) + gpio_free(i--); + i = ARRAY_SIZE(gpios) - 1; + goto err_req_gpio; + } + } + + /* setup the outputs and init values */ + gpio_direction_output(PWR_GPIO_PIN, 0); + gpio_direction_output(CFG_GPIO_PIN, 1); + gpio_direction_output(DC_GPIO_PIN, 0); + gpio_direction_output(RD_GPIO_PIN, 1); + gpio_direction_output(WR_GPIO_PIN, 1); + gpio_direction_output(CS_GPIO_PIN, 1); + gpio_direction_output(RST_GPIO_PIN, 0); + + /* setup the inputs */ + gpio_direction_input(RDY_GPIO_PIN); + gpio_direction_input(IRQ_GPIO_PIN); + + /* start the hdb bus as an input */ + for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) + gpio_direction_output(i, 0); + + /* go into command mode */ + gpio_set_value(CFG_GPIO_PIN, 1); + gpio_set_value(RST_GPIO_PIN, 0); + msleep(10); + gpio_set_value(RST_GPIO_PIN, 1); + msleep(10); + am300_wait_event(par); + + return 0; + +err_req_gpio: + while (i > 0) + gpio_free(gpios[i--]); + + return err; +} + +static int am300_init_board(struct broadsheetfb_par *par) +{ + return am300_init_gpio_regs(par); +} + +static void am300_cleanup(struct broadsheetfb_par *par) +{ + int i; + + free_irq(IRQ_GPIO(RDY_GPIO_PIN), par); + + for (i = 0; i < ARRAY_SIZE(gpios); i++) + gpio_free(gpios[i]); + + for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) + gpio_free(i); + +} + +static u16 am300_get_hdb(struct broadsheetfb_par *par) +{ + u16 res = 0; + int i; + + for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++) + res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0; + + return res; +} + +static void am300_set_hdb(struct broadsheetfb_par *par, u16 data) +{ + int i; + + for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++) + gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01); +} + + +static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit, + u8 state) +{ + switch (bit) { + case BS_CS: + gpio_set_value(CS_GPIO_PIN, state); + break; + case BS_DC: + gpio_set_value(DC_GPIO_PIN, state); + break; + case BS_WR: + gpio_set_value(WR_GPIO_PIN, state); + break; + } +} + +static int am300_get_panel_type(void) +{ + return panel_type; +} + +static irqreturn_t am300_handle_irq(int irq, void *dev_id) +{ + struct broadsheetfb_par *par = dev_id; + + wake_up(&par->waitq); + return IRQ_HANDLED; +} + +static int am300_setup_irq(struct fb_info *info) +{ + int ret; + struct broadsheetfb_par *par = info->par; + + ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq, + IRQF_DISABLED|IRQF_TRIGGER_RISING, + "AM300", par); + if (ret) + dev_err(&am300_device->dev, "request_irq failed: %d\n", ret); + + return ret; +} + +static struct broadsheet_board am300_board = { + .owner = THIS_MODULE, + .init = am300_init_board, + .cleanup = am300_cleanup, + .set_hdb = am300_set_hdb, + .get_hdb = am300_get_hdb, + .set_ctl = am300_set_ctl, + .wait_for_rdy = am300_wait_event, + .get_panel_type = am300_get_panel_type, + .setup_irq = am300_setup_irq, +}; + +int __init am300_init(void) +{ + int ret; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config)); + + /* request our platform independent driver */ + request_module("broadsheetfb"); + + am300_device = platform_device_alloc("broadsheetfb", -1); + if (!am300_device) + return -ENOMEM; + + /* the am300_board that will be seen by broadsheetfb is a copy */ + platform_device_add_data(am300_device, &am300_board, + sizeof(am300_board)); + + ret = platform_device_add(am300_device); + + if (ret) { + platform_device_put(am300_device); + return ret; + } + + return 0; +} + +module_param(panel_type, uint, 0); +MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97"); + +MODULE_DESCRIPTION("board driver for am300 epd kit"); +MODULE_AUTHOR("Jaya Kumar"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index 83a4cdf08176..253fd76142d6 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -22,10 +22,8 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/pxa2xx_spi.h> -#include <mach/bitfield.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index df83b97f303f..34576ba5f5fd 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -17,7 +17,7 @@ #include <linux/rtc-v3020.h> #include <video/mbxfb.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/ohci.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 3156b25f6e9d..7873fa3d8fa4 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <asm/mach/pci.h> -#include <mach/pxa-regs.h> #include <asm/mach-types.h> #include <asm/hardware/it8152.h> diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index d99fd9e4d888..117b5435f8d5 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -22,8 +22,6 @@ #include <asm/mach/map.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> #include <mach/audio.h> #include <mach/pxafb.h> @@ -96,7 +94,7 @@ static struct resource cmx270_dm9000_resource[] = { }; static struct dm9000_plat_data cmx270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY, + .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM, }; static struct platform_device cmx2xx_dm9000_device = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index ff0c577cd1ac..a9f48b1cb54a 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -28,9 +28,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa300.h> - -#include <mach/hardware.h> +#include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/mmc.h> #include <mach/ohci.h> @@ -162,7 +160,7 @@ static struct resource dm9000_resources[] = { }; static struct dm9000_plat_data cm_x300_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, + .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, }; static struct platform_device dm9000_device = { diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c index e8473624427e..26493ae2889e 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri.c @@ -28,8 +28,8 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa27x.h> + +#include <mach/pxa27x.h> #include <mach/colibri.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index a8d91b6c136b..3b89e5010fb3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -41,9 +41,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/i2c.h> #include <mach/irda.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 411607bc1fc2..d9b96319d498 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -22,7 +22,6 @@ #include <linux/string.h> #include <mach/corgi.h> #include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/sharpsl.h> #include <mach/spitz.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index e35259032813..7f04b3a761d1 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -24,7 +24,6 @@ #include <mach/sharpsl.h> #include <mach/corgi.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-gpio.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 8e2f2215c4ba..a5ee70735e04 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -20,7 +20,6 @@ #include <asm/mach-types.h> #include <mach/ssp.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-gpio.h> #include <mach/regs-ssp.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 771dd4eac935..083a1d851d49 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -37,8 +37,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #ifdef DEBUG diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 968c8309ec37..67f34a8d8e60 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -15,8 +15,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa3xx-regs.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index e16f8e3d58d3..d245e59c51b1 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <mach/pxa-regs.h> #include <mach/udc.h> #include <mach/pxafb.h> #include <mach/mmc.h> diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c index 7de17fc5d54b..01217e01f7d2 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/mach-pxa/dma.c @@ -23,8 +23,6 @@ #include <mach/hardware.h> #include <mach/dma.h> -#include <mach/pxa-regs.h> - struct dma_channel { char *name; pxa_dma_prio prio; @@ -113,7 +111,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -int __init pxa_init_dma(int num_ch) +int __init pxa_init_dma(int irq, int num_ch) { int i, ret; @@ -131,7 +129,7 @@ int __init pxa_init_dma(int num_ch) dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW); } - ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); + ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL); if (ret) { printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n"); kfree(dma_channels); diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c index 1bd7f740427c..74d3f8987c5c 100644 --- a/arch/arm/mach-pxa/e330.c +++ b/arch/arm/mach-pxa/e330.c @@ -20,9 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c index edcd9d5ce545..080036272131 100644 --- a/arch/arm/mach-pxa/e350.c +++ b/arch/arm/mach-pxa/e350.c @@ -21,9 +21,7 @@ #include <asm/mach-types.h> #include <mach/irqs.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c index 77bb8e2c48c0..ed9c0c3f64a2 100644 --- a/arch/arm/mach-pxa/e400.c +++ b/arch/arm/mach-pxa/e400.c @@ -22,9 +22,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/pxafb.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 6d48e00f4f0b..e0c3aaf1ecb3 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -24,9 +24,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irda.h> diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index be1ab8edb973..84b050f1a996 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -23,9 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irda.h> diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index cc9b1293e866..f8924f6ca544 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -23,9 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/pxa-regs.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f5ed8038ede5..920dfb8d36da 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -11,40 +11,63 @@ #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <linux/dm9000.h> #include <linux/rtc-v3020.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/mfd/da903x.h> +#include <linux/regulator/machine.h> +#include <linux/spi/spi.h> +#include <linux/spi/tdo24m.h> +#include <linux/power_supply.h> +#include <linux/apm-emulation.h> + +#include <media/soc_camera.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> +#include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/mmc.h> #include <mach/pxa27x_keypad.h> +#include <mach/i2c.h> +#include <mach/camera.h> +#include <mach/pxa2xx_spi.h> #include "generic.h" +#include "devices.h" -/* GPIO IRQ usage */ -#define GPIO41_ETHIRQ (41) +/* EM-X270 specific GPIOs */ #define GPIO13_MMC_CD (13) +#define GPIO95_MMC_WP (95) +#define GPIO56_NAND_RB (56) + +/* eXeda specific GPIOs */ +#define GPIO114_MMC_CD (114) +#define GPIO20_NAND_RB (20) +#define GPIO38_SD_PWEN (38) + +/* common GPIOs */ +#define GPIO11_NAND_CS (11) +#define GPIO93_CAM_RESET (93) +#define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) -#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD) -/* NAND control GPIOs */ -#define GPIO11_NAND_CS (11) -#define GPIO56_NAND_RB (56) +static int mmc_cd; +static int nand_rb; +static int dm9000_flags; -static unsigned long em_x270_pin_config[] = { +static unsigned long common_pin_config[] = { /* AC'97 */ GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, @@ -150,21 +173,32 @@ static unsigned long em_x270_pin_config[] = { GPIO18_RDY, /* GPIO */ - GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */ /* power controls */ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */ + GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */ GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */ /* NAND controls */ GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */ - GPIO56_GPIO, /* NAND Ready/Busy */ /* interrupts */ - GPIO13_GPIO, /* MMC card detect */ GPIO41_GPIO, /* DM9000 interrupt */ }; +static unsigned long em_x270_pin_config[] = { + GPIO13_GPIO, /* MMC card detect */ + GPIO56_GPIO, /* NAND Ready/Busy */ + GPIO95_GPIO, /* MMC Write protect */ +}; + +static unsigned long exeda_pin_config[] = { + GPIO20_GPIO, /* NAND Ready/Busy */ + GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */ + GPIO114_GPIO, /* MMC card detect */ +}; + #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) static struct resource em_x270_dm9000_resource[] = { [0] = { @@ -185,7 +219,7 @@ static struct resource em_x270_dm9000_resource[] = { }; static struct dm9000_plat_data em_x270_dm9000_platdata = { - .flags = DM9000_PLATF_32BITONLY, + .flags = DM9000_PLATF_NO_EEPROM, }; static struct platform_device em_x270_dm9000 = { @@ -200,6 +234,7 @@ static struct platform_device em_x270_dm9000 = { static void __init em_x270_init_dm9000(void) { + em_x270_dm9000_platdata.flags |= dm9000_flags; platform_device_register(&em_x270_dm9000); } #else @@ -289,7 +324,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd) { dsb(); - return gpio_get_value(GPIO56_NAND_RB); + return gpio_get_value(nand_rb); } static struct mtd_partition em_x270_partition_info[] = { @@ -354,14 +389,14 @@ static void __init em_x270_init_nand(void) gpio_direction_output(GPIO11_NAND_CS, 1); - err = gpio_request(GPIO56_NAND_RB, "NAND R/B"); + err = gpio_request(nand_rb, "NAND R/B"); if (err) { pr_warning("EM-X270: failed to request NAND R/B gpio\n"); gpio_free(GPIO11_NAND_CS); return; } - gpio_direction_input(GPIO56_NAND_RB); + gpio_direction_input(nand_rb); platform_device_register(&em_x270_nand); } @@ -369,6 +404,61 @@ static void __init em_x270_init_nand(void) static inline void em_x270_init_nand(void) {} #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition em_x270_nor_parts[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00050000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Environment", + .offset = 0x00050000, + .size = 0x00010000, + }, { + .name = "Reserved", + .offset = 0x00060000, + .size = 0x00050000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Splashscreen", + .offset = 0x000b0000, + .size = 0x00050000, + } +}; + +static struct physmap_flash_data em_x270_nor_data[] = { + [0] = { + .width = 2, + .parts = em_x270_nor_parts, + .nr_parts = ARRAY_SIZE(em_x270_nor_parts), + }, +}; + +static struct resource em_x270_nor_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_1M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device em_x270_physmap_flash = { + .name = "physmap-flash", + .id = 0, + .num_resources = 1, + .resource = &em_x270_nor_flash_resource, + .dev = { + .platform_data = &em_x270_nor_data, + }, +}; + +static void __init em_x270_init_nor(void) +{ + platform_device_register(&em_x270_physmap_flash); +} +#else +static inline void em_x270_init_nor(void) {} +#endif + /* PXA27x OHCI controller setup */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static int em_x270_ohci_init(struct device *dev) @@ -395,40 +485,93 @@ static inline void em_x270_init_ohci(void) {} /* MCI controller setup */ #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) +static struct regulator *em_x270_sdio_ldo; + static int em_x270_mci_init(struct device *dev, irq_handler_t em_x270_detect_int, void *data) { - int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, + int err; + + em_x270_sdio_ldo = regulator_get(dev, "vcc sdio"); + if (IS_ERR(em_x270_sdio_ldo)) { + dev_err(dev, "can't request SDIO power supply: %ld\n", + PTR_ERR(em_x270_sdio_ldo)); + return PTR_ERR(em_x270_sdio_ldo); + } + + err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "MMC card detect", data); if (err) { - printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", - __func__, err); - return err; + dev_err(dev, "can't request MMC card detect IRQ: %d\n", err); + goto err_irq; + } + + if (machine_is_em_x270()) { + err = gpio_request(GPIO95_MMC_WP, "MMC WP"); + if (err) { + dev_err(dev, "can't request MMC write protect: %d\n", + err); + goto err_gpio_wp; + } + gpio_direction_input(GPIO95_MMC_WP); + } else { + err = gpio_request(GPIO38_SD_PWEN, "sdio power"); + if (err) { + dev_err(dev, "can't request MMC power control : %d\n", + err); + goto err_gpio_wp; + } + gpio_direction_output(GPIO38_SD_PWEN, 1); } return 0; + +err_gpio_wp: + free_irq(gpio_to_irq(mmc_cd), data); +err_irq: + regulator_put(em_x270_sdio_ldo); + + return err; } static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) { - /* - FIXME: current hardware implementation does not allow to - enable/disable MMC power. This will be fixed in next HW releases, - and we'll need to add implmentation here. - */ - return; + struct pxamci_platform_data* p_d = dev->platform_data; + + if ((1 << vdd) & p_d->ocr_mask) { + int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; + + regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); + regulator_enable(em_x270_sdio_ldo); + } else { + regulator_disable(em_x270_sdio_ldo); + } } static void em_x270_mci_exit(struct device *dev, void *data) { - int irq = gpio_to_irq(GPIO13_MMC_CD); - free_irq(irq, data); + free_irq(gpio_to_irq(mmc_cd), data); + regulator_put(em_x270_sdio_ldo); + + if (machine_is_em_x270()) + gpio_free(GPIO95_MMC_WP); + else + gpio_free(GPIO38_SD_PWEN); +} + +static int em_x270_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO95_MMC_WP); } static struct pxamci_platform_data em_x270_mci_platform_data = { - .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31, + .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| + MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| + MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| + MMC_VDD_30_31|MMC_VDD_31_32, .init = em_x270_mci_init, .setpower = em_x270_mci_setpower, .exit = em_x270_mci_exit, @@ -436,33 +579,53 @@ static struct pxamci_platform_data em_x270_mci_platform_data = { static void __init em_x270_init_mmc(void) { + if (machine_is_em_x270()) + em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro; + + em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } #else static inline void em_x270_init_mmc(void) {} #endif -/* LCD 480x640 */ +/* LCD */ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) -static struct pxafb_mode_info em_x270_lcd_mode = { - .pixclock = 50000, - .bpp = 16, - .xres = 480, - .yres = 640, - .hsync_len = 8, - .vsync_len = 2, - .left_margin = 8, - .upper_margin = 0, - .right_margin = 24, - .lower_margin = 4, - .cmap_greyscale = 0, +static struct pxafb_mode_info em_x270_lcd_modes[] = { + [0] = { + .pixclock = 38250, + .bpp = 16, + .xres = 480, + .yres = 640, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 24, + .lower_margin = 4, + .sync = 0, + }, + [1] = { + .pixclock = 153800, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 2, + .left_margin = 8, + .upper_margin = 2, + .right_margin = 88, + .lower_margin = 2, + .sync = 0, + }, }; static struct pxafb_mach_info em_x270_lcd = { - .modes = &em_x270_lcd_mode, - .num_modes = 1, + .modes = em_x270_lcd_modes, + .num_modes = 2, .lcd_conn = LCD_COLOR_TFT_16BPP, }; + static void __init em_x270_init_lcd(void) { set_pxa_fb_info(&em_x270_lcd); @@ -471,6 +634,40 @@ static void __init em_x270_init_lcd(void) static inline void em_x270_init_lcd(void) {} #endif +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +static struct pxa2xx_spi_master em_x270_spi_info = { + .num_chipselect = 1, +}; + +static struct pxa2xx_spi_chip em_x270_tdo24m_chip = { + .rx_threshold = 1, + .tx_threshold = 1, +}; + +static struct tdo24m_platform_data em_x270_tdo24m_pdata = { + .model = TDO35S, +}; + +static struct spi_board_info em_x270_spi_devices[] __initdata = { + { + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, +}; + +static void __init em_x270_init_spi(void) +{ + pxa2xx_set_spi_info(1, &em_x270_spi_info); + spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); +} +#else +static inline void em_x270_init_spi(void) {} +#endif + #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE) static void __init em_x270_init_ac97(void) { @@ -481,23 +678,76 @@ static inline void em_x270_init_ac97(void) {} #endif #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) -static unsigned int em_x270_matrix_keys[] = { +static unsigned int em_x270_module_matrix_keys[] = { KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT), KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D), }; -struct pxa27x_keypad_platform_data em_x270_keypad_info = { +struct pxa27x_keypad_platform_data em_x270_module_keypad_info = { /* code map for the matrix keys */ .matrix_key_rows = 3, .matrix_key_cols = 3, - .matrix_key_map = em_x270_matrix_keys, - .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys), + .matrix_key_map = em_x270_module_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys), +}; + +static unsigned int em_x270_exeda_matrix_keys[] = { + KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL), + KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE), + KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL), + KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH), + + KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M), + KEY(1, 2, KEY_N), KEY(1, 3, KEY_B), + KEY(1, 4, KEY_V), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z), + + KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON), + KEY(2, 2, KEY_L), KEY(2, 3, KEY_K), + KEY(2, 4, KEY_J), KEY(2, 5, KEY_H), + KEY(2, 6, KEY_G), KEY(2, 7, KEY_F), + + KEY(3, 0, KEY_D), KEY(3, 1, KEY_S), + KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB), + KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P), + KEY(3, 6, KEY_O), KEY(3, 7, KEY_I), + + KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_T), KEY(4, 3, KEY_R), + KEY(4, 4, KEY_E), KEY(4, 5, KEY_W), + KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS), + + KEY(5, 0, KEY_0), KEY(5, 1, KEY_9), + KEY(5, 2, KEY_8), KEY(5, 3, KEY_7), + KEY(5, 4, KEY_6), KEY(5, 5, KEY_5), + KEY(5, 6, KEY_4), KEY(5, 7, KEY_3), + + KEY(6, 0, KEY_2), KEY(6, 1, KEY_1), + KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END), + KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP), + KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1), + + KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT), + KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME), + KEY(7, 4, 0), KEY(7, 5, 0), + KEY(7, 6, 0), KEY(7, 7, 0), +}; + +struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = { + /* code map for the matrix keys */ + .matrix_key_rows = 8, + .matrix_key_cols = 8, + .matrix_key_map = em_x270_exeda_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys), }; static void __init em_x270_init_keypad(void) { - pxa_set_keypad_info(&em_x270_keypad_info); + if (machine_is_em_x270()) + pxa_set_keypad_info(&em_x270_module_keypad_info); + else + pxa_set_keypad_info(&em_x270_exeda_keypad_info); } #else static inline void em_x270_init_keypad(void) {} @@ -535,19 +785,264 @@ static void __init em_x270_init_gpio_keys(void) static inline void em_x270_init_gpio_keys(void) {} #endif -static void __init em_x270_init(void) +/* Quick Capture Interface and sensor setup */ +#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) +static struct regulator *em_x270_camera_ldo; + +static int em_x270_sensor_init(struct device *dev) { + int ret; + + ret = gpio_request(GPIO93_CAM_RESET, "camera reset"); + if (ret) + return ret; + + gpio_direction_output(GPIO93_CAM_RESET, 0); + + em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); + if (em_x270_camera_ldo == NULL) { + gpio_free(GPIO93_CAM_RESET); + return -ENODEV; + } + + ret = regulator_enable(em_x270_camera_ldo); + if (ret) { + regulator_put(em_x270_camera_ldo); + gpio_free(GPIO93_CAM_RESET); + return ret; + } + + gpio_set_value(GPIO93_CAM_RESET, 1); + + return 0; +} + +struct pxacamera_platform_data em_x270_camera_platform_data = { + .init = em_x270_sensor_init, + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, +}; + +static int em_x270_sensor_power(struct device *dev, int on) +{ + int ret; + int is_on = regulator_is_enabled(em_x270_camera_ldo); + + if (on == is_on) + return 0; + + gpio_set_value(GPIO93_CAM_RESET, !on); + + if (on) + ret = regulator_enable(em_x270_camera_ldo); + else + ret = regulator_disable(em_x270_camera_ldo); + + if (ret) + return ret; + + gpio_set_value(GPIO93_CAM_RESET, on); + + return 0; +} + +static struct soc_camera_link iclink = { + .bus_id = 0, + .power = em_x270_sensor_power, +}; + +static struct i2c_board_info em_x270_i2c_cam_info[] = { + { + I2C_BOARD_INFO("mt9m111", 0x48), + .platform_data = &iclink, + }, +}; + +static struct i2c_pxa_platform_data em_x270_i2c_info = { + .fast_mode = 1, +}; + +static void __init em_x270_init_camera(void) +{ + pxa_set_i2c_info(&em_x270_i2c_info); + i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info)); + pxa_set_camera_info(&em_x270_camera_platform_data); +} +#else +static inline void em_x270_init_camera(void) {} +#endif + +/* DA9030 related initializations */ +#define REGULATOR_CONSUMER(_name, _dev, _supply) \ + static struct regulator_consumer_supply _name##_consumers[] = { \ + { \ + .dev = _dev, \ + .supply = _supply, \ + }, \ + } + +REGULATOR_CONSUMER(ldo3, NULL, "vcc gps"); +REGULATOR_CONSUMER(ldo5, NULL, "vcc cam"); +REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio"); +REGULATOR_CONSUMER(ldo12, NULL, "vcc usb"); +REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs"); + +#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \ + static struct regulator_init_data _ldo##_data = { \ + .constraints = { \ + .min_uV = _min_uV, \ + .max_uV = _max_uV, \ + .state_mem = { \ + .enabled = 0, \ + }, \ + .valid_ops_mask = _ops_mask, \ + }, \ + .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \ + .consumer_supplies = _ldo##_consumers, \ + }; + +REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo10, 2000000, 3200000, + REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE); +REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS); +REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS); + +struct led_info em_x270_led_info = { + .name = "em-x270:orange", + .default_trigger = "battery-charging-or-full", +}; + +struct power_supply_info em_x270_psy_info = { + .name = "LP555597P6H-FPS", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3000000, + .use_for_apm = 1, +}; + +static void em_x270_battery_low(void) +{ + apm_queue_event(APM_LOW_BATTERY); +} + +static void em_x270_battery_critical(void) +{ + apm_queue_event(APM_CRITICAL_SUSPEND); +} + +struct da9030_battery_info em_x270_batterty_info = { + .battery_info = &em_x270_psy_info, + + .charge_milliamp = 1000, + .charge_millivolt = 4200, + + .vbat_low = 3600, + .vbat_crit = 3400, + .vbat_charge_start = 4100, + .vbat_charge_stop = 4200, + .vbat_charge_restart = 4000, + + .vcharge_min = 3200, + .vcharge_max = 5500, + + .tbat_low = 197, + .tbat_high = 78, + .tbat_restart = 100, + + .batmon_interval = 0, + + .battery_low = em_x270_battery_low, + .battery_critical = em_x270_battery_critical, +}; + +#define DA9030_SUBDEV(_name, _id, _pdata) \ + { \ + .name = "da903x-" #_name, \ + .id = DA9030_ID_##_id, \ + .platform_data = _pdata, \ + } + +#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data) + +struct da903x_subdev_info em_x270_da9030_subdevs[] = { + DA9030_LDO(3), + DA9030_LDO(5), + DA9030_LDO(10), + DA9030_LDO(12), + DA9030_LDO(19), + + DA9030_SUBDEV(led, LED_PC, &em_x270_led_info), + DA9030_SUBDEV(backlight, WLED, &em_x270_led_info), + DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info), +}; + +static struct da903x_platform_data em_x270_da9030_info = { + .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs), + .subdevs = em_x270_da9030_subdevs, +}; + +static struct i2c_board_info em_x270_i2c_pmic_info = { + I2C_BOARD_INFO("da9030", 0x49), + .irq = IRQ_GPIO(0), + .platform_data = &em_x270_da9030_info, +}; + +static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = { + .use_pio = 1, +}; + +static void __init em_x270_init_da9030(void) +{ + pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info); + i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1); +} + +static void __init em_x270_module_init(void) +{ + pr_info("%s\n", __func__); pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config)); + mmc_cd = GPIO13_MMC_CD; + nand_rb = GPIO56_NAND_RB; + dm9000_flags = DM9000_PLATF_32BITONLY; +} + +static void __init em_x270_exeda_init(void) +{ + pr_info("%s\n", __func__); + pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config)); + + mmc_cd = GPIO114_MMC_CD; + nand_rb = GPIO20_NAND_RB; + dm9000_flags = DM9000_PLATF_16BITONLY; +} + +static void __init em_x270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config)); + + if (machine_is_em_x270()) + em_x270_module_init(); + else if (machine_is_exeda()) + em_x270_exeda_init(); + else + panic("Unsupported machine: %d\n", machine_arch_type); + + em_x270_init_da9030(); em_x270_init_dm9000(); em_x270_init_rtc(); em_x270_init_nand(); + em_x270_init_nor(); em_x270_init_lcd(); em_x270_init_mmc(); em_x270_init_ohci(); em_x270_init_keypad(); em_x270_init_gpio_keys(); em_x270_init_ac97(); + em_x270_init_camera(); + em_x270_init_spi(); } MACHINE_START(EM_X270, "Compulab EM-X270") @@ -559,3 +1054,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END + +MACHINE_START(EXEDA, "Compulab eXeda") + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = em_x270_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index dfce7d5b659e..c60dadf847a6 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -20,8 +20,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/mfp-pxa25x.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irda.h> diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index df5f822f3b6c..92ba16e1b6fc 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -19,18 +19,16 @@ #include <linux/input.h> #include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> #include <mach/pxafb.h> #include <mach/ohci.h> #include <mach/i2c.h> #include <mach/hardware.h> #include <mach/pxa27x_keypad.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 0ccc91c92c44..3126a35aa002 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -26,8 +26,9 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> -#include <mach/pxa-regs.h> #include <mach/reset.h> +#include <mach/gpio.h> +#include <mach/pxa2xx-gpio.h> #include "generic.h" @@ -127,3 +128,33 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } + +/* + * Configure pins for GPIO or other functions + */ +int pxa_gpio_mode(int gpio_mode) +{ + unsigned long flags; + int gpio = gpio_mode & GPIO_MD_MASK_NR; + int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; + int gafr; + + if (gpio > pxa_last_gpio) + return -EINVAL; + + local_irq_save(flags); + if (gpio_mode & GPIO_DFLT_LOW) + GPCR(gpio) = GPIO_bit(gpio); + else if (gpio_mode & GPIO_DFLT_HIGH) + GPSR(gpio) = GPIO_bit(gpio); + if (gpio_mode & GPIO_MD_MASK_DIR) + GPDR(gpio) |= GPIO_bit(gpio); + else + GPDR(gpio) &= ~GPIO_bit(gpio); + gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); + GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); + local_irq_restore(flags); + + return 0; +} +EXPORT_SYMBOL(pxa_gpio_mode); diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index dc876a8e6668..3465268ca716 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -9,20 +9,17 @@ * published by the Free Software Foundation. */ -typedef int (*set_wake_t)(unsigned int, unsigned int); - struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq(int irq_nr, set_wake_t fn); -extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn); +extern void __init pxa_init_irq(int irq_nr, + int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa25x_init_irq(void); extern void __init pxa27x_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa_map_io(void); extern unsigned int get_clk_frequency_khz(int info); -extern int pxa_last_gpio; #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c index 5fec1e479cb3..7c2267036bf1 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/mach-pxa/gpio.c @@ -13,22 +13,34 @@ */ #include <linux/init.h> -#include <linux/module.h> #include <linux/irq.h> -#include <linux/sysdev.h> #include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/bootmem.h> + +#include <mach/gpio.h> -#include <asm/gpio.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> +int pxa_last_gpio; -#include "generic.h" +/* + * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with + * one set of registers. The register offsets are organized below: + * + * GPLR GPDR GPSR GPCR GRER GFER GEDR + * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 + * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C + * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 + * + * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 + * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C + * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 + * + * NOTE: + * BANK 3 is only available on PXA27x and later processors. + * BANK 4 and 5 are only available on PXA935 + */ -#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) -#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) -#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) -#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) +#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n)) #define GPLR_OFFSET 0x00 #define GPDR_OFFSET 0x0C @@ -40,195 +52,138 @@ struct pxa_gpio_chip { struct gpio_chip chip; - void __iomem *regbase; + void __iomem *regbase; + char label[10]; + + unsigned long irq_mask; + unsigned long irq_edge_rise; + unsigned long irq_edge_fall; + +#ifdef CONFIG_PM + unsigned long saved_gplr; + unsigned long saved_gpdr; + unsigned long saved_grer; + unsigned long saved_gfer; +#endif }; -int pxa_last_gpio; +static DEFINE_SPINLOCK(gpio_lock); +static struct pxa_gpio_chip *pxa_gpio_chips; -#ifdef CONFIG_CPU_PXA26x -/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, - * as well as their Alternate Function value being '1' for GPIO in GAFRx. - */ -static int __gpio_is_inverted(unsigned gpio) +#define for_each_gpio_chip(i, c) \ + for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) + +static inline void __iomem *gpio_chip_base(struct gpio_chip *c) { - return cpu_is_pxa25x() && gpio > 85; + return container_of(c, struct pxa_gpio_chip, chip)->regbase; } -#else -#define __gpio_is_inverted(gpio) (0) -#endif -/* - * Configure pins for GPIO or other functions - */ -int pxa_gpio_mode(int gpio_mode) +static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio) { - unsigned long flags; - int gpio = gpio_mode & GPIO_MD_MASK_NR; - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - - if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); - if (gpio_mode & GPIO_DFLT_LOW) - GPCR(gpio) = GPIO_bit(gpio); - else if (gpio_mode & GPIO_DFLT_HIGH) - GPSR(gpio) = GPIO_bit(gpio); - if (gpio_mode & GPIO_MD_MASK_DIR) - GPDR(gpio) |= GPIO_bit(gpio); - else - GPDR(gpio) &= ~GPIO_bit(gpio); - gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); - GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); - local_irq_restore(flags); - - return 0; + return &pxa_gpio_chips[gpio_to_bank(gpio)]; } -EXPORT_SYMBOL(pxa_gpio_mode); static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { - unsigned long flags; - u32 mask = 1 << offset; - u32 value; - struct pxa_gpio_chip *pxa; - void __iomem *gpdr; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - gpdr = pxa->regbase + GPDR_OFFSET; - local_irq_save(flags); - value = __raw_readl(gpdr); + void __iomem *base = gpio_chip_base(chip); + uint32_t value, mask = 1 << offset; + unsigned long flags; + + spin_lock_irqsave(&gpio_lock, flags); + + value = __raw_readl(base + GPDR_OFFSET); if (__gpio_is_inverted(chip->base + offset)) value |= mask; else value &= ~mask; - __raw_writel(value, gpdr); - local_irq_restore(flags); + __raw_writel(value, base + GPDR_OFFSET); + spin_unlock_irqrestore(&gpio_lock, flags); return 0; } static int pxa_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) + unsigned offset, int value) { - unsigned long flags; - u32 mask = 1 << offset; - u32 tmp; - struct pxa_gpio_chip *pxa; - void __iomem *gpdr; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - __raw_writel(mask, - pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET)); - gpdr = pxa->regbase + GPDR_OFFSET; - local_irq_save(flags); - tmp = __raw_readl(gpdr); + void __iomem *base = gpio_chip_base(chip); + uint32_t tmp, mask = 1 << offset; + unsigned long flags; + + __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET)); + + spin_lock_irqsave(&gpio_lock, flags); + + tmp = __raw_readl(base + GPDR_OFFSET); if (__gpio_is_inverted(chip->base + offset)) tmp &= ~mask; else tmp |= mask; - __raw_writel(tmp, gpdr); - local_irq_restore(flags); + __raw_writel(tmp, base + GPDR_OFFSET); + spin_unlock_irqrestore(&gpio_lock, flags); return 0; } -/* - * Return GPIO level - */ static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset) { - u32 mask = 1 << offset; - struct pxa_gpio_chip *pxa; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask; + return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset); } -/* - * Set output GPIO level - */ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { - u32 mask = 1 << offset; - struct pxa_gpio_chip *pxa; - - pxa = container_of(chip, struct pxa_gpio_chip, chip); - - if (value) - __raw_writel(mask, pxa->regbase + GPSR_OFFSET); - else - __raw_writel(mask, pxa->regbase + GPCR_OFFSET); + __raw_writel(1 << offset, gpio_chip_base(chip) + + (value ? GPSR_OFFSET : GPCR_OFFSET)); } -#define GPIO_CHIP(_n) \ - [_n] = { \ - .regbase = GPIO##_n##_BASE, \ - .chip = { \ - .label = "gpio-" #_n, \ - .direction_input = pxa_gpio_direction_input, \ - .direction_output = pxa_gpio_direction_output, \ - .get = pxa_gpio_get, \ - .set = pxa_gpio_set, \ - .base = (_n) * 32, \ - .ngpio = 32, \ - }, \ +static int __init pxa_init_gpio_chip(int gpio_end) +{ + int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; + struct pxa_gpio_chip *chips; + + /* this is early, we have to use bootmem allocator, and we really + * want this to be allocated dynamically for different 'gpio_end' + */ + chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip)); + if (chips == NULL) { + pr_err("%s: failed to allocate GPIO chips\n", __func__); + return -ENOMEM; } -static struct pxa_gpio_chip pxa_gpio_chip[] = { - GPIO_CHIP(0), - GPIO_CHIP(1), - GPIO_CHIP(2), -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - GPIO_CHIP(3), -#endif -}; + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { + struct gpio_chip *c = &chips[i].chip; -/* - * PXA GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * Use this instead of directly setting GRER/GFER. - */ + sprintf(chips[i].label, "gpio-%d", i); + chips[i].regbase = (void __iomem *)GPIO_BANK(i); -static unsigned long GPIO_IRQ_rising_edge[4]; -static unsigned long GPIO_IRQ_falling_edge[4]; -static unsigned long GPIO_IRQ_mask[4]; + c->base = gpio; + c->label = chips[i].label; -/* - * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate - * function of a GPIO, and GPDRx cannot be altered once configured. It - * is attributed as "occupied" here (I know this terminology isn't - * accurate, you are welcome to propose a better one :-) - */ -static int __gpio_is_occupied(unsigned gpio) -{ - if (cpu_is_pxa27x() || cpu_is_pxa25x()) { - int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; - int dir = GPDR(gpio) & GPIO_bit(gpio); - - if (__gpio_is_inverted(gpio)) - return af != 1 || dir == 0; - else - return af != 0 || dir != 0; - } + c->direction_input = pxa_gpio_direction_input; + c->direction_output = pxa_gpio_direction_output; + c->get = pxa_gpio_get; + c->set = pxa_gpio_set; + /* number of GPIOs on last bank may be less than 32 */ + c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32; + gpiochip_add(c); + } + pxa_gpio_chips = chips; return 0; } static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { - int gpio, idx; + struct pxa_gpio_chip *c; + int gpio = irq_to_gpio(irq); + unsigned long gpdr, mask = GPIO_bit(gpio); - gpio = IRQ_TO_GPIO(irq); - idx = gpio >> 5; + c = gpio_to_chip(gpio); if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or * GPIOs set to alternate function or to output during probe */ - if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) || - (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio))) + if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio)) return 0; if (__gpio_is_occupied(gpio)) @@ -237,23 +192,25 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } + gpdr = __raw_readl(c->regbase + GPDR_OFFSET); + if (__gpio_is_inverted(gpio)) - GPDR(gpio) |= GPIO_bit(gpio); + __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET); else - GPDR(gpio) &= ~GPIO_bit(gpio); + __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET); if (type & IRQ_TYPE_EDGE_RISING) - __set_bit(gpio, GPIO_IRQ_rising_edge); + c->irq_edge_rise |= mask; else - __clear_bit(gpio, GPIO_IRQ_rising_edge); + c->irq_edge_rise &= ~mask; if (type & IRQ_TYPE_EDGE_FALLING) - __set_bit(gpio, GPIO_IRQ_falling_edge); + c->irq_edge_fall |= mask; else - __clear_bit(gpio, GPIO_IRQ_falling_edge); + c->irq_edge_fall &= ~mask; - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; + __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); + __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -261,87 +218,62 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) return 0; } -/* - * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1. - */ - -static void pxa_ack_low_gpio(unsigned int irq) -{ - GEDR0 = (1 << (irq - IRQ_GPIO0)); -} - -static void pxa_mask_low_gpio(unsigned int irq) -{ - ICMR &= ~(1 << (irq - PXA_IRQ(0))); -} - -static void pxa_unmask_low_gpio(unsigned int irq) -{ - ICMR |= 1 << (irq - PXA_IRQ(0)); -} - -static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .ack = pxa_ack_low_gpio, - .mask = pxa_mask_low_gpio, - .unmask = pxa_unmask_low_gpio, - .set_type = pxa_gpio_irq_type, -}; - -/* - * Demux handler for GPIO>=2 edge detect interrupts - */ - -#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE) - static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) { - int loop, bit, n; - unsigned long gedr[4]; + struct pxa_gpio_chip *c; + int loop, gpio, gpio_base, n; + unsigned long gedr; do { - gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3; - gedr[1] = GEDR1 & GPIO_IRQ_mask[1]; - gedr[2] = GEDR2 & GPIO_IRQ_mask[2]; - gedr[3] = GEDR3 & GPIO_IRQ_mask[3]; - - GEDR0 = gedr[0]; GEDR1 = gedr[1]; - GEDR2 = gedr[2]; GEDR3 = gedr[3]; - loop = 0; - bit = find_first_bit(gedr, GEDR_BITS); - while (bit < GEDR_BITS) { - loop = 1; + for_each_gpio_chip(gpio, c) { + gpio_base = c->chip.base; + + gedr = __raw_readl(c->regbase + GEDR_OFFSET); + gedr = gedr & c->irq_mask; + __raw_writel(gedr, c->regbase + GEDR_OFFSET); - n = PXA_GPIO_IRQ_BASE + bit; - generic_handle_irq(n); + n = find_first_bit(&gedr, BITS_PER_LONG); + while (n < BITS_PER_LONG) { + loop = 1; - bit = find_next_bit(gedr, GEDR_BITS, bit + 1); + generic_handle_irq(gpio_to_irq(gpio_base + n)); + n = find_next_bit(&gedr, BITS_PER_LONG, n + 1); + } } } while (loop); } static void pxa_ack_muxed_gpio(unsigned int irq) { - int gpio = irq - IRQ_GPIO(2) + 2; - GEDR(gpio) = GPIO_bit(gpio); + int gpio = irq_to_gpio(irq); + struct pxa_gpio_chip *c = gpio_to_chip(gpio); + + __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); } static void pxa_mask_muxed_gpio(unsigned int irq) { - int gpio = irq - IRQ_GPIO(2) + 2; - __clear_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) &= ~GPIO_bit(gpio); - GFER(gpio) &= ~GPIO_bit(gpio); + int gpio = irq_to_gpio(irq); + struct pxa_gpio_chip *c = gpio_to_chip(gpio); + uint32_t grer, gfer; + + c->irq_mask &= ~GPIO_bit(gpio); + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio); + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio); + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); } static void pxa_unmask_muxed_gpio(unsigned int irq) { - int gpio = irq - IRQ_GPIO(2) + 2; - int idx = gpio >> 5; - __set_bit(gpio, GPIO_IRQ_mask); - GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx]; - GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; + int gpio = irq_to_gpio(irq); + struct pxa_gpio_chip *c = gpio_to_chip(gpio); + + c->irq_mask |= GPIO_bit(gpio); + __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); + __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); } static struct irq_chip pxa_muxed_gpio_chip = { @@ -352,85 +284,65 @@ static struct irq_chip pxa_muxed_gpio_chip = { .set_type = pxa_gpio_irq_type, }; -void __init pxa_init_gpio(int gpio_nr, set_wake_t fn) +void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn) { - int irq, i, gpio; - - pxa_last_gpio = gpio_nr - 1; + struct pxa_gpio_chip *c; + int gpio, irq; - /* clear all GPIO edge detects */ - for (i = 0; i < gpio_nr; i += 32) { - GFER(i) = 0; - GRER(i) = 0; - GEDR(i) = GEDR(i); - } + pxa_last_gpio = end; - /* GPIO 0 and 1 must have their mask bit always set */ - GPIO_IRQ_mask[0] = 3; + /* Initialize GPIO chips */ + pxa_init_gpio_chip(end); - for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { - set_irq_chip(irq, &pxa_low_gpio_chip); - set_irq_handler(irq, handle_edge_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + /* clear all GPIO edge detects */ + for_each_gpio_chip(gpio, c) { + __raw_writel(0, c->regbase + GFER_OFFSET); + __raw_writel(0, c->regbase + GRER_OFFSET); + __raw_writel(~0,c->regbase + GEDR_OFFSET); } - for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) { + for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) { set_irq_chip(irq, &pxa_muxed_gpio_chip); set_irq_handler(irq, handle_edge_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* Install handler for GPIO>=2 edge detect interrupts */ - set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); - - pxa_low_gpio_chip.set_wake = fn; + set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler); pxa_muxed_gpio_chip.set_wake = fn; - - /* add a GPIO chip for each register bank. - * the last PXA25x register only contains 21 GPIOs - */ - for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) { - if (gpio + 32 > gpio_nr) - pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio; - gpiochip_add(&pxa_gpio_chip[i].chip); - } } #ifdef CONFIG_PM - -static unsigned long saved_gplr[4]; -static unsigned long saved_gpdr[4]; -static unsigned long saved_grer[4]; -static unsigned long saved_gfer[4]; - static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state) { - int i, gpio; + struct pxa_gpio_chip *c; + int gpio; - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { - saved_gplr[i] = GPLR(gpio); - saved_gpdr[i] = GPDR(gpio); - saved_grer[i] = GRER(gpio); - saved_gfer[i] = GFER(gpio); + for_each_gpio_chip(gpio, c) { + c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET); + c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET); + c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET); + c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET); /* Clear GPIO transition detect bits */ - GEDR(gpio) = GEDR(gpio); + __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET); } return 0; } static int pxa_gpio_resume(struct sys_device *dev) { - int i, gpio; + struct pxa_gpio_chip *c; + int gpio; - for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) { + for_each_gpio_chip(gpio, c) { /* restore level with set/clear */ - GPSR(gpio) = saved_gplr[i]; - GPCR(gpio) = ~saved_gplr[i]; + __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET); + __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET); - GRER(gpio) = saved_grer[i]; - GFER(gpio) = saved_gfer[i]; - GPDR(gpio) = saved_gpdr[i]; + __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET); + __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET); + __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET); } return 0; } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index e296ce11658c..ca9912ea78d9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -38,14 +38,12 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/flash.h> + +#include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/gumstix.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> - #include "generic.h" static struct resource flash_resource = { @@ -191,6 +189,11 @@ int __attribute__((weak)) am200_init(void) return 0; } +int __attribute__((weak)) am300_init(void) +{ + return 0; +} + static void __init carrier_board_init(void) { /* @@ -198,6 +201,7 @@ static void __init carrier_board_init(void) * they cannot be detected programatically */ am200_init(); + am300_init(); } static void __init gumstix_init(void) diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index da6e4422c0f3..6a197fb5c095 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -24,14 +24,15 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> + +#include <mach/pxa25x.h> #include <mach/h5000.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> #include <mach/udc.h> + #include "generic.h" /* diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c new file mode 100644 index 000000000000..cea99fe65b97 --- /dev/null +++ b/arch/arm/mach-pxa/himalaya.c @@ -0,0 +1,166 @@ +/* + * linux/arch/arm/mach-pxa/himalaya.c + * + * Hardware definitions for the HTC Himalaya + * + * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c + * + * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/fb.h> +#include <linux/platform_device.h> + +#include <video/w100fb.h> + +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/mfp-pxa25x.h> +#include <mach/hardware.h> + +#include "generic.h" + +/* ---------------------- Himalaya LCD definitions -------------------- */ + +static struct w100_gen_regs himalaya_lcd_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x00000000, + .lcdd_cntl2 = 0x0003ffff, + .genlcd_cntl1 = 0x00fff003, + .genlcd_cntl2 = 0x00000003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_mode himalaya4_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 0, + .right_margin = 31, + .upper_margin = 15, + .lower_margin = 0, + .crtc_ss = 0x80150014, + .crtc_ls = 0xa0fb00f7, + .crtc_gs = 0xc0080007, + .crtc_vpos_gs = 0x00080007, + .crtc_rev = 0x0000000a, + .crtc_dclk = 0x81700030, + .crtc_gclk = 0x8015010f, + .crtc_goe = 0x00000000, + .pll_freq = 80, + .pixclk_divider = 15, + .pixclk_divider_rotated = 15, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .sysclk_src = CLK_SRC_PLL, +}; + +static struct w100_mode himalaya6_lcd_mode = { + .xres = 240, + .yres = 320, + .left_margin = 9, + .right_margin = 8, + .upper_margin = 5, + .lower_margin = 4, + .crtc_ss = 0x80150014, + .crtc_ls = 0xa0fb00f7, + .crtc_gs = 0xc0080007, + .crtc_vpos_gs = 0x00080007, + .crtc_rev = 0x0000000a, + .crtc_dclk = 0xa1700030, + .crtc_gclk = 0x8015010f, + .crtc_goe = 0x00000000, + .pll_freq = 95, + .pixclk_divider = 0xb, + .pixclk_divider_rotated = 4, + .pixclk_src = CLK_SRC_PLL, + .sysclk_divider = 1, + .sysclk_src = CLK_SRC_PLL, +}; + +static struct w100_gpio_regs himalaya_w100_gpio_info = { + .init_data1 = 0xffff0000, /* GPIO_DATA */ + .gpio_dir1 = 0x00000000, /* GPIO_CNTL1 */ + .gpio_oe1 = 0x003c0000, /* GPIO_CNTL2 */ + .init_data2 = 0x00000000, /* GPIO_DATA2 */ + .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */ + .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */ +}; + +static struct w100fb_mach_info himalaya_fb_info = { + .num_modes = 1, + .regs = &himalaya_lcd_regs, + .gpio = &himalaya_w100_gpio_info, + .xtal_freq = 16000000, +}; + +static struct resource himalaya_fb_resources[] = { + [0] = { + .start = 0x08000000, + .end = 0x08ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device himalaya_fb_device = { + .name = "w100fb", + .id = -1, + .dev = { + .platform_data = &himalaya_fb_info, + }, + .num_resources = ARRAY_SIZE(himalaya_fb_resources), + .resource = himalaya_fb_resources, +}; + +/* ----------------------------------------------------------------------- */ + +static struct platform_device *devices[] __initdata = { + &himalaya_fb_device, +}; + +static void __init himalaya_lcd_init(void) +{ + int himalaya_boardid; + + himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */ + printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n", + himalaya_boardid); + + switch (himalaya_boardid) { + case 0x4: + himalaya_fb_info.modelist = &himalaya4_lcd_mode; + break; + case 0x6: + himalaya_fb_info.modelist = &himalaya6_lcd_mode; + break; + default: + printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n", + himalaya_boardid); + himalaya_fb_info.modelist = &himalaya4_lcd_mode; + } +} + +static void __init himalaya_init(void) +{ + himalaya_lcd_init(); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + + +MACHINE_START(HIMALAYA, "HTC Himalaya") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .init_machine = himalaya_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 013b15baa034..b6243b59d9be 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -31,8 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/idp.h> #include <mach/pxafb.h> #include <mach/bitfield.h> diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 364c5e271330..2121309b2474 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -28,11 +28,8 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> +#include <mach/pxa27x.h> #include <mach/i2c.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> -#include <mach/regs-ssp.h> #include <mach/udc.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h index 7804637a6df3..b0812f59d3f8 100644 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ b/arch/arm/mach-pxa/include/mach/dma.h @@ -12,6 +12,62 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H +#include <mach/hardware.h> + +/* DMA Controller Registers Definitions */ +#define DMAC_REGS_VIRT io_p2v(0x40000000) +#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x)))) + +#define DCSR(n) DMAC_REG((n) << 2) +#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */ +#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */ +#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4)) +#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4)) +#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4)) +#define DCMD(n) DMAC_REG(0x020c + ((n) << 4)) +#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \ + (((n) & 0x3f) << 2)) + +#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ +#endif + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ +#define DDADR_STOP (1 << 0) /* Stop (read / write) */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + /* * Descriptor structure for PXA's DMA engine * Note: this structure must always be aligned to a 16-byte boundary. @@ -34,7 +90,7 @@ typedef enum { * DMA registration */ -int __init pxa_init_dma(int num_ch); +int __init pxa_init_dma(int irq, int num_ch); int pxa_request_dma (char *name, pxa_dma_prio prio, diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h index 2c538d8c362d..406fa102cb40 100644 --- a/arch/arm/mach-pxa/include/mach/gpio.h +++ b/arch/arm/mach-pxa/include/mach/gpio.h @@ -24,16 +24,87 @@ #ifndef __ASM_ARCH_PXA_GPIO_H #define __ASM_ARCH_PXA_GPIO_H -#include <mach/pxa-regs.h> -#include <asm/irq.h> +#include <mach/irqs.h> #include <mach/hardware.h> - #include <asm-generic/gpio.h> +#define GPIO_REGS_VIRT io_p2v(0x40E00000) + +#define BANK_OFF(n) (((n) > 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) + +/* GPIO Pin Level Registers */ +#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00) +#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00) +#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00) +#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00) + +/* GPIO Pin Direction Registers */ +#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c) +#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c) +#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c) +#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c) + +/* GPIO Pin Output Set Registers */ +#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18) +#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18) +#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18) +#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18) + +/* GPIO Pin Output Clear Registers */ +#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24) +#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24) +#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24) +#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24) + +/* GPIO Rising Edge Detect Registers */ +#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30) +#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30) +#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30) +#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30) + +/* GPIO Falling Edge Detect Registers */ +#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c) +#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c) +#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c) +#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c) + +/* GPIO Edge Detect Status Registers */ +#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48) +#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48) +#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48) +#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48) + +/* GPIO Alternate Function Select Registers */ +#define GAFR0_L GPIO_REG(0x0054) +#define GAFR0_U GPIO_REG(0x0058) +#define GAFR1_L GPIO_REG(0x005C) +#define GAFR1_U GPIO_REG(0x0060) +#define GAFR2_L GPIO_REG(0x0064) +#define GAFR2_U GPIO_REG(0x0068) +#define GAFR3_L GPIO_REG(0x006C) +#define GAFR3_U GPIO_REG(0x0070) + +/* More handy macros. The argument is a literal GPIO number. */ + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) +#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30) +#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c) +#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48) +#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) + /* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space. + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. */ +extern int pxa_last_gpio; + #define NR_BUILTIN_GPIO 128 static inline int gpio_get_value(unsigned gpio) @@ -56,10 +127,45 @@ static inline void gpio_set_value(unsigned gpio, int value) } } -#define gpio_cansleep __gpio_cansleep - +#define gpio_cansleep __gpio_cansleep +#define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) IRQ_GPIO(gpio) #define irq_to_gpio(irq) IRQ_TO_GPIO(irq) +#ifdef CONFIG_CPU_PXA26x +/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, + * as well as their Alternate Function value being '1' for GPIO in GAFRx. + */ +static inline int __gpio_is_inverted(unsigned gpio) +{ + return cpu_is_pxa25x() && gpio > 85; +} +#else +static inline int __gpio_is_inverted(unsigned gpio) { return 0; } +#endif + +/* + * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate + * function of a GPIO, and GPDRx cannot be altered once configured. It + * is attributed as "occupied" here (I know this terminology isn't + * accurate, you are welcome to propose a better one :-) + */ +static inline int __gpio_is_occupied(unsigned gpio) +{ + if (cpu_is_pxa27x() || cpu_is_pxa25x()) { + int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3; + int dir = GPDR(gpio) & GPIO_bit(gpio); + + if (__gpio_is_inverted(gpio)) + return af != 1 || dir == 0; + else + return af != 0 || dir != 0; + } else + return GPDR(gpio) & GPIO_bit(gpio); +} + +typedef int (*set_wake_t)(unsigned int irq, unsigned int on); + +extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn); #endif diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h index 099f54a41de4..06abd4160607 100644 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ b/arch/arm/mach-pxa/include/mach/gumstix.h @@ -97,4 +97,5 @@ has detected a cable insertion; driven low otherwise. */ /* for expansion boards that can't be programatically detected */ extern int am200_init(void); +extern int am300_init(void); diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 4cb24154a5a8..751b74811d0f 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -25,7 +25,6 @@ /* FPGA register virtual addresses */ #define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) -#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) #define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) #define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) #define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 38d68d99f585..82a399f3f9f2 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -69,7 +69,7 @@ #define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) #define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) -#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) +#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) /* * CPLD EGPIOs diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index cfca8155be72..297387ec3618 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -15,8 +15,8 @@ #ifndef __ARCH_PXA_MTD_XIP_H__ #define __ARCH_PXA_MTD_XIP_H__ -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> +#include <mach/regs-intc.h> #define xip_irqpending() (ICIP & ICMR) diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h new file mode 100644 index 000000000000..7c295a48d784 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -0,0 +1,109 @@ +/* + * GPIOs and interrupts for Palm LifeDrive Handheld Computer + * + * Authors: Alex Osborne <ato@meshy.org> + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMLD_H_ +#define _INCLUDE_PALMLD_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMLD_GPIO_RESET 1 +#define GPIO_NR_PALMLD_POWER_DETECT 4 +#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMLD_POWER_SWITCH 12 +#define GPIO_NR_PALMLD_EARPHONE_DETECT 13 +#define GPIO_NR_PALMLD_LOCK_SWITCH 15 + +/* SD/MMC */ +#define GPIO_NR_PALMLD_SD_DETECT_N 14 +#define GPIO_NR_PALMLD_SD_POWER 114 +#define GPIO_NR_PALMLD_SD_READONLY 116 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMLD_WM9712_IRQ 27 + +/* IRDA */ +#define GPIO_NR_PALMLD_IR_DISABLE 108 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMLD_BL_POWER 19 +#define GPIO_NR_PALMLD_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMLD_BORDER_SWITCH 21 +#define GPIO_NR_PALMLD_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMLD_BT_POWER 17 +#define GPIO_NR_PALMLD_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMLD_PCMCIA_READY 38 +#define GPIO_NR_PALMLD_PCMCIA_POWER 36 +#define GPIO_NR_PALMLD_PCMCIA_RESET 81 + +/* LEDs */ +#define GPIO_NR_PALMLD_LED_GREEN 52 +#define GPIO_NR_PALMLD_LED_AMBER 94 + +/* IDE */ +#define GPIO_NR_PALMLD_IDE_IRQ 95 +#define GPIO_NR_PALMLD_IDE_RESET 98 +#define GPIO_NR_PALMLD_IDE_PWEN 115 + +/* USB */ +#define GPIO_NR_PALMLD_USB_DETECT_N 3 +#define GPIO_NR_PALMLD_USB_READY 86 +#define GPIO_NR_PALMLD_USB_RESET 88 +#define GPIO_NR_PALMLD_USB_INT 106 +#define GPIO_NR_PALMLD_USB_POWER 118 +/* 20, 53 and 86 are usb related too */ + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET) +#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N) +#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ) +#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ) + + +/** HERE ARE INIT VALUES **/ + +/* IO mappings */ +#define PALMLD_USB_PHYS PXA_CS2_PHYS +#define PALMLD_USB_VIRT 0xf0000000 +#define PALMLD_USB_SIZE 0x00100000 + +#define PALMLD_IDE_PHYS 0x20000000 +#define PALMLD_IDE_VIRT 0xf1000000 +#define PALMLD_IDE_SIZE 0x00100000 + +#define PALMLD_PHYS_IO_START 0x40000000 + +/* BATTERY */ +#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ +#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */ +#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */ + +#define PALMLD_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMLD_MAX_INTENSITY 0xFE +#define PALMLD_DEFAULT_INTENSITY 0x7E +#define PALMLD_LIMIT_MASK 0x7F +#define PALMLD_PRESCALER 0x3F +#define PALMLD_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h new file mode 100644 index 000000000000..94db2881f048 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -0,0 +1,84 @@ +/* + * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer + * + * Authors: Ales Snuparek <snuparek@atlas.cz> + * Marek Vasut <marek.vasut@gmail.com> + * Justin Kendrick <twilightsentry@gmail.com> + * RichardT5 <richard_t5@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMT5_H_ +#define _INCLUDE_PALMT5_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMT5_GPIO_RESET 1 + +#define GPIO_NR_PALMT5_POWER_DETECT 90 +#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMT5_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMT5_SD_DETECT_N 14 +#define GPIO_NR_PALMT5_SD_POWER 114 +#define GPIO_NR_PALMT5_SD_READONLY 115 + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMT5_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMT5_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMT5_USB_DETECT_N 15 +#define GPIO_NR_PALMT5_USB_POWER 95 +#define GPIO_NR_PALMT5_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMT5_BL_POWER 84 +#define GPIO_NR_PALMT5_LCD_POWER 96 + +/* BLUETOOTH */ +#define GPIO_NR_PALMT5_BT_POWER 17 +#define GPIO_NR_PALMT5_BT_RESET 83 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) +#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ) +#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT) +#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMT5_PHYS_RAM_START 0xa0000000 +#define PALMT5_PHYS_IO_START 0x40000000 + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + +/* BATTERY */ +#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMT5_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMT5_MAX_INTENSITY 0xFE +#define PALMT5_DEFAULT_INTENSITY 0x7E +#define PALMT5_LIMIT_MASK 0x7F +#define PALMT5_PRESCALER 0x3F +#define PALMT5_PERIOD_NS 3500 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index 83342469acac..a6eeef8a075f 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -27,3 +27,13 @@ extern void pxa27x_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); extern int pxa_pm_enter(suspend_state_t state); + +/* NOTE: this is for PM debugging on Lubbock, it's really a big + * ugly, but let's keep the crap minimum here, instead of direct + * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c + */ +#ifdef CONFIG_ARCH_LUBBOCK +extern void lubbock_set_hexled(uint32_t value); +#else +#define lubbock_set_hexled(x) +#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h deleted file mode 100644 index 31d615aa7723..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/pxa-regs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA_REGS_H -#define __PXA_REGS_H - -#include <mach/hardware.h> - -/* - * PXA Chip selects - */ - -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 - - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - - -/* - * DMA Controller - */ -#define DCSR(x) __REG2(0x40000000, (x) << 2) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ -#endif - -#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ -#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ - -#define DRCMR(n) (*(((n) < 64) ? \ - &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ - &__REG2(0x40001100, ((n) & 0x3f) << 2))) - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ - -#define DDADR(x) __REG2(0x40000200, (x) << 4) -#define DSADR(x) __REG2(0x40000204, (x) << 4) -#define DTADR(x) __REG2(0x40000208, (x) << 4) -#define DCMD(x) __REG2(0x4000020c, (x) << 4) - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* - * Real Time Clock - */ - -#define RCNR __REG(0x40900000) /* RTC Count Register */ -#define RTAR __REG(0x40900004) /* RTC Alarm Register */ -#define RTSR __REG(0x40900008) /* RTC Status Register */ -#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ - -#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - - -/* - * OS Timer & Match Registers - */ - -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ - -#define OSSR_M3 (1 << 3) /* Match status channel 3 */ -#define OSSR_M2 (1 << 2) /* Match status channel 2 */ -#define OSSR_M1 (1 << 1) /* Match status channel 1 */ -#define OSSR_M0 (1 << 0) /* Match status channel 0 */ - -#define OWER_WME (1 << 0) /* Watchdog Match Enable */ - -#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ -#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ -#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ -#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* - * General Purpose I/O - */ - -#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ - -#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ - -#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ - -#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ - -#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ - -#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ - -#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ - -#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ - -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) - -#endif diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h new file mode 100644 index 000000000000..508c3ba1f4d0 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA25x_H +#define __MACH_PXA25x_H + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> + +#endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h new file mode 100644 index 000000000000..6876e16c2970 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -0,0 +1,19 @@ +#ifndef __MACH_PXA27x_H +#define __MACH_PXA27x_H + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa27x.h> + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +#endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h index d83393e25273..1209c44aa6f1 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h @@ -3,6 +3,8 @@ #warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h +#include <mach/gpio.h> + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index 77102d695cc7..4fcddd9cab76 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -14,6 +14,19 @@ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H +#include <mach/hardware.h> + +/* + * PXA Chip selects + */ + +#define PXA_CS0_PHYS 0x00000000 +#define PXA_CS1_PHYS 0x04000000 +#define PXA_CS2_PHYS 0x08000000 +#define PXA_CS3_PHYS 0x0C000000 +#define PXA_CS4_PHYS 0x10000000 +#define PXA_CS5_PHYS 0x14000000 + /* * Memory controller */ @@ -69,24 +82,6 @@ #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - -#ifdef CONFIG_PXA27x - -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - -#endif - - /* * Power Manager */ diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h new file mode 100644 index 000000000000..2f33076c9e48 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa300.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA300_H +#define __MACH_PXA300_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa300.h> + +#endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h new file mode 100644 index 000000000000..cab78e903273 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa320.h @@ -0,0 +1,9 @@ +#ifndef __MACH_PXA320_H +#define __MACH_PXA320_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa320.h> + +#endif /* __MACH_PXA320_H */ + diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index bcf3fb2c4b3a..7d1a059b3d43 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -13,6 +13,17 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H +#include <mach/hardware.h> + +/* + * Static Chip Selects + */ + +#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */ +#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */ +#define PXA3xx_CS2_PHYS (0x10000000) +#define PXA3xx_CS3_PHYS (0x14000000) + /* * Oscillator Configuration Register (OSCC) */ diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h new file mode 100644 index 000000000000..d45f76a9b54d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa930.h @@ -0,0 +1,8 @@ +#ifndef __MACH_PXA930_H +#define __MACH_PXA930_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/mfp-pxa930.h> + +#endif /* __MACH_PXA930_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h new file mode 100644 index 000000000000..ad23e74b762f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-intc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_INTC_H +#define __ASM_MACH_REGS_INTC_H + +#include <mach/hardware.h> + +/* + * Interrupt Controller + */ + +#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ +#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ +#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ +#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ +#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ +#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ + +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ + +#endif /* __ASM_MACH_REGS_INTC_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h new file mode 100644 index 000000000000..a3e5f86ef67e --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-ost.h @@ -0,0 +1,34 @@ +#ifndef __ASM_MACH_REGS_OST_H +#define __ASM_MACH_REGS_OST_H + +#include <mach/hardware.h> + +/* + * OS Timer & Match Registers + */ + +#define OSMR0 __REG(0x40A00000) /* */ +#define OSMR1 __REG(0x40A00004) /* */ +#define OSMR2 __REG(0x40A00008) /* */ +#define OSMR3 __REG(0x40A0000C) /* */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ +#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ +#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ +#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OWER_WME (1 << 0) /* Watchdog Match Enable */ + +#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ +#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ +#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + +#endif /* __ASM_MACH_REGS_OST_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h new file mode 100644 index 000000000000..f0e4a589bbe1 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_REGS_RTC_H +#define __ASM_MACH_REGS_RTC_H + +#include <mach/hardware.h> + +/* + * Real Time Clock + */ + +#define RCNR __REG(0x40900000) /* RTC Count Register */ +#define RTAR __REG(0x40900004) /* RTC Alarm Register */ +#define RTSR __REG(0x40900008) /* RTC Status Register */ +#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ + +#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + +#endif /* __ASM_MACH_REGS_RTC_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h index cf31986f6f05..8152be683881 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h @@ -37,7 +37,6 @@ #if defined(CONFIG_PXA25x) #define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ - #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h index 0f381e692999..0a587c4ec709 100644 --- a/arch/arm/mach-pxa/include/mach/system.h +++ b/arch/arm/mach-pxa/include/mach/system.h @@ -13,7 +13,6 @@ #include <asm/proc-fns.h> #include "hardware.h" #include "pxa2xx-regs.h" -#include "pxa-regs.h" static inline void arch_idle(void) { diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index fa69c3a6a38e..f6e0300e4f64 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -20,7 +20,8 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> +#include <mach/gpio.h> +#include <mach/regs-intc.h> #include "generic.h" @@ -51,6 +52,72 @@ static struct irq_chip pxa_internal_irq_chip = { .unmask = pxa_unmask_irq, }; +/* + * GPIO IRQs for GPIO 0 and 1 + */ +static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type) +{ + int gpio = irq - IRQ_GPIO0; + + if (__gpio_is_occupied(gpio)) { + pr_err("%s failed: GPIO is configured\n", __func__); + return -EINVAL; + } + + if (type & IRQ_TYPE_EDGE_RISING) + GRER0 |= GPIO_bit(gpio); + else + GRER0 &= ~GPIO_bit(gpio); + + if (type & IRQ_TYPE_EDGE_FALLING) + GFER0 |= GPIO_bit(gpio); + else + GFER0 &= ~GPIO_bit(gpio); + + return 0; +} + +static void pxa_ack_low_gpio(unsigned int irq) +{ + GEDR0 = (1 << (irq - IRQ_GPIO0)); +} + +static void pxa_mask_low_gpio(unsigned int irq) +{ + ICMR &= ~(1 << (irq - PXA_IRQ(0))); +} + +static void pxa_unmask_low_gpio(unsigned int irq) +{ + ICMR |= 1 << (irq - PXA_IRQ(0)); +} + +static struct irq_chip pxa_low_gpio_chip = { + .name = "GPIO-l", + .ack = pxa_ack_low_gpio, + .mask = pxa_mask_low_gpio, + .unmask = pxa_unmask_low_gpio, + .set_type = pxa_set_low_gpio_type, +}; + +static void __init pxa_init_low_gpio_irq(set_wake_t fn) +{ + int irq; + + /* clear edge detection on GPIO 0 and 1 */ + GFER0 &= ~0x3; + GRER0 &= ~0x3; + GEDR0 = 0x3; + + for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) { + set_irq_chip(irq, &pxa_low_gpio_chip); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID); + } + + pxa_low_gpio_chip.set_wake = fn; +} + void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq; @@ -72,6 +139,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) } pxa_internal_irq_chip.set_wake = fn; + pxa_init_low_gpio_irq(fn); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c index 18b20d469410..8b9c17142d5a 100644 --- a/arch/arm/mach-pxa/leds-idp.c +++ b/arch/arm/mach-pxa/leds-idp.c @@ -18,7 +18,7 @@ #include <asm/leds.h> #include <asm/system.h> -#include <mach/pxa-regs.h> +#include <mach/pxa25x.h> #include <mach/idp.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c index 1a258029c33c..e26d5efe1969 100644 --- a/arch/arm/mach-pxa/leds-lubbock.c +++ b/arch/arm/mach-pxa/leds-lubbock.c @@ -16,7 +16,7 @@ #include <mach/hardware.h> #include <asm/leds.h> #include <asm/system.h> -#include <mach/pxa-regs.h> +#include <mach/pxa25x.h> #include <mach/lubbock.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c index 95e06b849634..db4af5eee8b2 100644 --- a/arch/arm/mach-pxa/leds-mainstone.c +++ b/arch/arm/mach-pxa/leds-mainstone.c @@ -16,7 +16,7 @@ #include <asm/leds.h> #include <asm/system.h> -#include <mach/pxa-regs.h> +#include <mach/pxa27x.h> #include <mach/mainstone.h> #include "leds.h" diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 31da7f3c06f6..e13f6a81c223 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -39,8 +39,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/ssp.h> #include <mach/pxa2xx_spi.h> diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index de3f67daaacf..d64395f26a3e 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -38,9 +38,8 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> +#include <mach/gpio.h> #include <mach/lpd270.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index bff704354c1a..f04c8333dff7 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -41,15 +41,15 @@ #include <asm/hardware/sa1111.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> +#include <mach/gpio.h> #include <mach/audio.h> #include <mach/lubbock.h> #include <mach/udc.h> #include <mach/irda.h> #include <mach/pxafb.h> #include <mach/mmc.h> +#include <mach/pm.h> #include "generic.h" #include "clock.h" @@ -113,8 +113,14 @@ static unsigned long lubbock_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, }; +#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) +void lubbock_set_hexled(uint32_t value) +{ + LUB_HEXLED = value; +} + void lubbock_set_misc_wr(unsigned int mask, unsigned int set) { unsigned long flags; diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 21b821e1a60d..d46b36746be2 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,14 +25,14 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> +#include <linux/usb/gpio_vbus.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> + +#include <mach/pxa27x.h> #include <mach/magician.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> #include <mach/pxafb.h> #include <mach/i2c.h> #include <mach/mmc.h> @@ -66,6 +66,11 @@ static unsigned long magician_pin_config[] __initdata = { GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, + /* SSP 1 */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + /* SSP 2 */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, @@ -148,22 +153,31 @@ static struct pxaficp_platform_data magician_ficp_info = { * GPIO Keys */ +#define INIT_KEY(_code, _gpio, _desc) \ + { \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ + } + static struct gpio_keys_button magician_button_table[] = { - {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"}, - {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"}, - {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"}, - {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"}, - {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"}, - {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"}, - {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"}, - {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"}, - {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"}, - {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"}, - {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"}, - {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"}, - {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"}, - {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"}, - {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"}, + INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"), + INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"), + INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"), + INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"), + INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"), + INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"), + INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"), + INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"), + INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"), + INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"), + INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"), + INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"), + INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"), + INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"), + INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"), }; static struct gpio_keys_platform_data gpio_keys_data = { @@ -189,7 +203,7 @@ static struct platform_device gpio_keys = { static struct resource egpio_resources[] = { [0] = { .start = PXA_CS3_PHYS, - .end = PXA_CS3_PHYS + 0x20, + .end = PXA_CS3_PHYS + 0x20 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -420,7 +434,7 @@ static struct gpio_led gpio_leds[] = { }, { .name = "magician::phone_bl", - .default_trigger = "none", + .default_trigger = "backlight", .gpio = GPIO103_MAGICIAN_LED_KP, }, }; @@ -468,8 +482,6 @@ static struct pasic3_led pasic3_leds[] = { }, }; -static struct platform_device pasic3; - static struct pasic3_leds_machinfo pasic3_leds_info = { .num_leds = ARRAY_SIZE(pasic3_leds), .power_gpio = EGPIO_MAGICIAN_LED_POWER, @@ -511,6 +523,31 @@ static struct platform_device pasic3 = { }; /* + * USB "Transceiver" + */ + +static struct resource gpio_vbus_resource = { + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, +}; + +static struct gpio_vbus_mach_info gpio_vbus_info = { + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, +}; + +static struct platform_device gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, + .dev = { + .platform_data = &gpio_vbus_info, + }, +}; + +/* * External power */ @@ -586,15 +623,17 @@ static struct pda_power_pdata power_supply_info = { static struct resource power_supply_resources[] = { [0] = { .name = "ac", - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_AC, - .end = IRQ_MAGICIAN_AC, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { .name = "usb", - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_AC, - .end = IRQ_MAGICIAN_AC, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; @@ -688,11 +727,9 @@ static void magician_set_vpp(struct map_info *map, int vpp) gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } -#define PXA_CS_SIZE 0x04000000 - static struct resource strataflash_resource = { .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1, + .end = PXA_CS0_PHYS + SZ_64M - 1, .flags = IORESOURCE_MEM, }; @@ -720,6 +757,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &gpio_vbus, &power_supply, &strataflash, &leds_gpio, @@ -743,6 +781,7 @@ static void __init magician_init(void) gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); pxa_set_ficp_info(&magician_ficp_info); } + pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(NULL); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 5f224968043c..a6c8429e975f 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -41,9 +41,8 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> +#include <mach/gpio.h> #include <mach/mainstone.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 33626de8cbf6..7ffb91d64c39 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -18,15 +18,12 @@ #include <linux/init.h> #include <linux/sysdev.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/gpio.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa2xx.h> #include "generic.h" -#define gpio_to_bank(gpio) ((gpio) >> 5) - #define PGSR(x) __REG2(0x40F00020, (x) << 2) #define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3) #define GAFR_L(x) __GAFR(0, x) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 2b427e015b6f..e77c95ca67f0 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -39,10 +39,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa27x.h> + +#include <mach/pxa27x.h> +#include <mach/regs-rtc.h> #include <mach/pxa27x_keypad.h> #include <mach/pxafb.h> -#include <mach/pxa2xx-regs.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/pxa27x-udc.h> diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 8a73814126b1..a65713ce019e 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -19,10 +19,10 @@ #include <linux/types.h> #include <linux/usb/isp116x.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> + +#include <mach/pxa25x.h> #include "generic.h" static void isp116x_pfm_delay(struct device *dev, int delay) diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c new file mode 100644 index 000000000000..8587477a9bb7 --- /dev/null +++ b/arch/arm/mach-pxa/palmld.c @@ -0,0 +1,565 @@ +/* + * Hardware definitions for Palm LifeDrive + * + * Author: Marek Vasut <marek.vasut@gmail.com> + * + * Based on work of: + * Alex Osborne <ato@meshy.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/palmld.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/palmasoc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmld_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO116_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO108_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* GPIO KEYS */ + GPIO10_GPIO, /* hotsync button */ + GPIO12_GPIO, /* power switch */ + GPIO15_GPIO, /* lock switch */ + + /* LEDs */ + GPIO52_GPIO, /* green led */ + GPIO94_GPIO, /* orange led */ + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO36_GPIO, /* wifi power */ + GPIO38_GPIO, /* wifi ready */ + GPIO81_GPIO, /* wifi reset */ + + /* HDD */ + GPIO95_GPIO, /* HDD irq */ + GPIO115_GPIO, /* HDD power */ + + /* MISC */ + GPIO13_GPIO, /* earphone detect */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), + palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMLD_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMLD_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); +err: + return err; +} + +static void palmld_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMLD_SD_READONLY); + gpio_free(GPIO_NR_PALMLD_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMLD_SD_DETECT_N); +} + +static void palmld_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmld_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY); +} + +static struct pxamci_platform_data palmld_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmld_mci_power, + .get_ro = palmld_mci_get_ro, + .init = palmld_mci_init, + .exit = palmld_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmld_matrix_keys[] = { + KEY(0, 1, KEY_F2), + KEY(0, 2, KEY_UP), + + KEY(1, 0, KEY_F3), + KEY(1, 1, KEY_F4), + KEY(1, 2, KEY_RIGHT), + + KEY(2, 0, KEY_F1), + KEY(2, 1, KEY_F5), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_F6), + KEY(3, 1, KEY_ENTER), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmld_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmld_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmld_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, + {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" }, + {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" }, +}; + +static struct gpio_keys_platform_data palmld_pxa_keys_data = { + .buttons = palmld_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmld_pxa_buttons), +}; + +static struct platform_device palmld_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmld_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmld_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMLD_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMLD_BL_POWER); +err: + return ret; +} + +static int palmld_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness); + return brightness; +} + +static void palmld_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_BL_POWER); + gpio_free(GPIO_NR_PALMLD_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmld_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMLD_MAX_INTENSITY, + .dft_brightness = PALMLD_MAX_INTENSITY, + .pwm_period_ns = PALMLD_PERIOD_NS, + .init = palmld_backlight_init, + .notify = palmld_backlight_notify, + .exit = palmld_backlight_exit, +}; + +static struct platform_device palmld_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmld_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmld_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMLD_IR_DISABLE); +err: + return err; +} + +static void palmld_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_IR_DISABLE); +} + +static void palmld_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmld_ficp_platform_data = { + .startup = palmld_irda_startup, + .shutdown = palmld_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmld_irda_transceiver_mode, +}; + +/****************************************************************************** + * LEDs + ******************************************************************************/ +struct gpio_led gpio_leds[] = { +{ + .name = "palmld:green:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMLD_LED_GREEN, +}, { + .name = "palmld:amber:led", + .default_trigger = "none", + .gpio = GPIO_NR_PALMLD_LED_AMBER, +}, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device palmld_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + } +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB"); + if (ret) + goto err2; + ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N); + if (ret) + goto err3; + + return 0; + +err3: + gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); +err2: + gpio_free(GPIO_NR_PALMLD_POWER_DETECT); +err1: + return ret; +} + +static int palmld_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT); +} + +static int palmld_is_usb_online(void) +{ + return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMLD_USB_DETECT_N); + gpio_free(GPIO_NR_PALMLD_POWER_DETECT); +} + +static char *palmld_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmld_is_ac_online, + .is_usb_online = palmld_is_usb_online, + .exit = power_supply_exit, + .supplied_to = palmld_supplicants, + .num_supplicants = ARRAY_SIZE(palmld_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMLD_BAT_MAX_VOLTAGE, + .min_voltage = PALMLD_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmld_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmld_lcd_screen = { + .modes = palmld_lcd_modes, + .num_modes = ARRAY_SIZE(palmld_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmld_pxa_keys, +#endif + &palmld_backlight, + &palmld_leds, + &power_supply, +}; + +static struct map_desc palmld_io_desc[] __initdata = { +{ + .virtual = PALMLD_IDE_VIRT, + .pfn = __phys_to_pfn(PALMLD_IDE_PHYS), + .length = PALMLD_IDE_SIZE, + .type = MT_DEVICE +}, +{ + .virtual = PALMLD_USB_VIRT, + .pfn = __phys_to_pfn(PALMLD_USB_PHYS), + .length = PALMLD_USB_SIZE, + .type = MT_DEVICE +}, +}; + +static void __init palmld_map_io(void) +{ + pxa_map_io(); + iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc)); +} + +static void __init palmld_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); + + set_pxa_fb_info(&palmld_lcd_screen); + pxa_set_mci_info(&palmld_mci_platform_data); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmld_ficp_platform_data); + pxa_set_keypad_info(&palmld_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + palm27x_asoc_set_pdata(&palm27x_asoc_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMLD, "Palm LifeDrive") + .phys_io = PALMLD_PHYS_IO_START, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = palmld_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmld_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c new file mode 100644 index 000000000000..9521c7b33492 --- /dev/null +++ b/arch/arm/mach-pxa/palmt5.c @@ -0,0 +1,496 @@ +/* + * Hardware definitions for Palm Tungsten|T5 + * + * Author: Marek Vasut <marek.vasut@gmail.com> + * + * Based on work of: + * Ales Snuparek <snuparek@atlas.cz> + * Justin Kendrick <twilightsentry@gmail.com> + * RichardT5 <richard_t5@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/palmt5.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/irda.h> +#include <mach/pxa27x_keypad.h> +#include <mach/udc.h> +#include <mach/palmasoc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmt5_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO14_GPIO, /* SD detect */ + GPIO114_GPIO, /* SD power */ + GPIO115_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* IrDA */ + GPIO40_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO95_GPIO, /* usb power */ + + /* MATRIX KEYPAD */ + GPIO100_KP_MKIN_0, + GPIO101_KP_MKIN_1, + GPIO102_KP_MKIN_2, + GPIO97_KP_MKIN_3, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* MISC */ + GPIO10_GPIO, /* hotsync button */ + GPIO90_GPIO, /* power detect */ + GPIO107_GPIO, /* earphone detect */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int, + void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), + palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMT5_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMT5_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); +err: + return err; +} + +static void palmt5_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMT5_SD_READONLY); + gpio_free(GPIO_NR_PALMT5_SD_POWER); + free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data); + gpio_free(GPIO_NR_PALMT5_SD_DETECT_N); +} + +static void palmt5_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmt5_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY); +} + +static struct pxamci_platform_data palmt5_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmt5_mci_power, + .get_ro = palmt5_mci_get_ro, + .init = palmt5_mci_init, + .exit = palmt5_mci_exit, +}; + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +static unsigned int palmt5_matrix_keys[] = { + KEY(0, 0, KEY_POWER), + KEY(0, 1, KEY_F1), + KEY(0, 2, KEY_ENTER), + + KEY(1, 0, KEY_F2), + KEY(1, 1, KEY_F3), + KEY(1, 2, KEY_F4), + + KEY(2, 0, KEY_UP), + KEY(2, 2, KEY_DOWN), + + KEY(3, 0, KEY_RIGHT), + KEY(3, 2, KEY_LEFT), +}; + +static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = { + .matrix_key_rows = 4, + .matrix_key_cols = 3, + .matrix_key_map = palmt5_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys), + + .debounce_interval = 30, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmt5_pxa_buttons[] = { + {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" }, +}; + +static struct gpio_keys_platform_data palmt5_pxa_keys_data = { + .buttons = palmt5_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons), +}; + +static struct platform_device palmt5_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmt5_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmt5_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMT5_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMT5_BL_POWER); +err: + return ret; +} + +static int palmt5_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness); + return brightness; +} + +static void palmt5_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_BL_POWER); + gpio_free(GPIO_NR_PALMT5_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmt5_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMT5_MAX_INTENSITY, + .dft_brightness = PALMT5_MAX_INTENSITY, + .pwm_period_ns = PALMT5_PERIOD_NS, + .init = palmt5_backlight_init, + .notify = palmt5_backlight_notify, + .exit = palmt5_backlight_exit, +}; + +static struct platform_device palmt5_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &palmt5_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmt5_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMT5_IR_DISABLE); +err: + return err; +} + +static void palmt5_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_IR_DISABLE); +} + +static void palmt5_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmt5_ficp_platform_data = { + .startup = palmt5_irda_startup, + .shutdown = palmt5_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmt5_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMT5_USB_POWER, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT); + if (ret) + goto err2; + + return 0; +err2: + gpio_free(GPIO_NR_PALMT5_POWER_DETECT); +err1: + return ret; +} + +static int palmt5_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMT5_POWER_DETECT); +} + +static char *palmt5_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmt5_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmt5_supplicants, + .num_supplicants = ARRAY_SIZE(palmt5_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMT5_BAT_MAX_VOLTAGE, + .min_voltage = PALMT5_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palm27x_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmt5_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 320, + .yres = 480, + .bpp = 16, + + .left_margin = 32, + .right_margin = 1, + .upper_margin = 7, + .lower_margin = 1, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmt5_lcd_screen = { + .modes = palmt5_lcd_modes, + .num_modes = ARRAY_SIZE(palmt5_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmt5_pxa_keys, +#endif + &palmt5_backlight, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init palmt5_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1); + gpio_free(GPIO_NR_PALMT5_USB_POWER); + } +} + +static void __init palmt5_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); + + set_pxa_fb_info(&palmt5_lcd_screen); + pxa_set_mci_info(&palmt5_mci_platform_data); + palmt5_udc_init(); + pxa_set_udc_info(&palmt5_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmt5_ficp_platform_data); + pxa_set_keypad_info(&palmt5_keypad_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + palm27x_asoc_set_pdata(&palm27x_asoc_pdata); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMT5, "Palm Tungsten|T5") + .phys_io = PALMT5_PHYS_IO_START, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = palmt5_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index a9d94f5dbec4..b490c0924619 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -32,12 +32,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/palmtx.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa27x.h> #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 2f730da3bba8..b88eb4dd2c84 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -33,13 +33,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/palmz72.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> #include <mach/irda.h> #include <mach/pxa27x_keypad.h> #include <mach/udc.h> diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 36135a02fdc7..6abfa2979c61 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -29,10 +29,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/mfp-pxa27x.h> -#include <mach/pxa2xx-regs.h> +#include <mach/pxa27x.h> #include <mach/pxa2xx_spi.h> #include <mach/pcm027.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 34841c72815f..f46698e20c1f 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -31,13 +31,12 @@ #include <mach/i2c.h> #include <mach/camera.h> #include <asm/mach/map.h> -#include <mach/pxa-regs.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pcm990_baseboard.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa27x.h> #include "devices.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 164eb0bb6321..884b174c8ead 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -14,15 +14,8 @@ #include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> -#include <linux/time.h> -#include <mach/hardware.h> -#include <asm/memory.h> -#include <asm/system.h> #include <mach/pm.h> -#include <mach/pxa-regs.h> -#include <mach/lubbock.h> -#include <asm/mach/time.h> struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; static unsigned long *sleep_save; @@ -57,9 +50,9 @@ int pxa_pm_enter(suspend_state_t state) /* if invalid, display message and wait for a hardware reset */ if (checksum != sleep_save_checksum) { -#ifdef CONFIG_ARCH_LUBBOCK - LUB_HEXLED = 0xbadbadc5; -#endif + + lubbock_set_hexled(0xbadbadc5); + while (1) pxa_cpu_pm_fns->enter(state); } diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index f9093beba752..572ddec2b3e6 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -36,9 +36,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> #include <mach/i2c.h> diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c index 3ca7ffc6904b..fcdd374437a8 100644 --- a/arch/arm/mach-pxa/pwm.c +++ b/arch/arm/mach-pxa/pwm.c @@ -20,7 +20,6 @@ #include <linux/pwm.h> #include <asm/div64.h> -#include <mach/pxa-regs.h> /* PWM registers and bits definitions */ #define PWMCR (0x00) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 6c57522e2469..77c2693cfeef 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,9 +25,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/gpio.h> +#include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/pm.h> #include <mach/dma.h> @@ -310,14 +309,14 @@ set_pwer: void __init pxa25x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(85, pxa25x_set_wake); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake); } #ifdef CONFIG_CPU_PXA26x void __init pxa26x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); - pxa_init_gpio(90, pxa25x_set_wake); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake); } #endif @@ -355,7 +354,7 @@ static int __init pxa25x_init(void) clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs)); - if ((ret = pxa_init_dma(16))) + if ((ret = pxa_init_dma(IRQ_DMA, 16))) return ret; pxa25x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 411bec54fdc4..a425ec71e657 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,9 +21,8 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <mach/irqs.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/gpio.h> +#include <mach/pxa27x.h> #include <mach/reset.h> #include <mach/ohci.h> #include <mach/pm.h> @@ -332,7 +331,7 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on) void __init pxa27x_init_irq(void) { pxa_init_irq(34, pxa27x_set_wake); - pxa_init_gpio(121, pxa27x_set_wake); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake); } /* @@ -381,7 +380,7 @@ static int __init pxa27x_init(void) clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs)); - if ((ret = pxa_init_dma(32))) + if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; pxa27x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 73d04d81c75a..2f3394f85917 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -16,7 +16,6 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa2xx.h> #include <mach/mfp-pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 83fb609b6eb7..37bb12d13ca2 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -17,9 +17,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 36f066196fa2..e708f4e0ecaf 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -17,10 +17,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <mach/hardware.h> -#include <mach/mfp.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa320.h> +#include <mach/pxa320.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 490893824e78..b02d4544dc95 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -23,6 +23,7 @@ #include <linux/sysdev.h> #include <mach/hardware.h> +#include <mach/gpio.h> #include <mach/pxa3xx-regs.h> #include <mach/reset.h> #include <mach/ohci.h> @@ -538,7 +539,7 @@ void __init pxa3xx_init_irq(void) __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); pxa_init_irq(56, pxa3xx_set_wake); - pxa_init_gpio(128, NULL); + pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); } /* @@ -594,7 +595,7 @@ static int __init pxa3xx_init(void) clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); - if ((ret = pxa_init_dma(32))) + if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; pxa3xx_init_pm(); diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 13e6bfdfff60..f15dfa55f27f 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -16,8 +16,7 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/mfp-pxa930.h> +#include <mach/pxa930.h> static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = { diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 00b2dc2a1074..867c95c09618 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -10,7 +10,7 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> #include <mach/reset.h> unsigned int reset_status; diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index 5d02a7325586..ff8239991430 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -25,11 +25,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa930.h> + +#include <mach/pxa930.h> #include <mach/i2c.h> -#include <mach/regs-lcd.h> #include <mach/pxafb.h> #include "devices.h" diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index f0845c1b001c..16b4ec67e3b6 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -25,7 +25,6 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/pm.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-gpio.h> #include <mach/sharpsl.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index a62c8375eb53..2ed95f369cfc 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -15,7 +15,6 @@ #include <asm/assembler.h> #include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #define MDREFR_KDIV 0x200a4000 // all banks diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6d447c9ce8ab..f697c492b2ab 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -44,9 +44,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/pxa27x-udc.h> #include <mach/reset.h> #include <mach/i2c.h> diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 072e77cfe5a3..2e4490562c9e 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -24,7 +24,6 @@ #include <mach/sharpsl.h> #include <mach/spitz.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> #include <mach/pxa2xx-gpio.h> #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 6f42004db3ed..965e38c6bafe 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -33,7 +33,6 @@ #include <asm/irq.h> #include <mach/hardware.h> #include <mach/ssp.h> -#include <mach/pxa-regs.h> #include <mach/regs-ssp.h> #define TIMEOUT 100000 diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index f3821cfda72f..29f5f5c180b7 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -13,7 +13,6 @@ #include <asm/assembler.h> #include <mach/hardware.h> -#include <mach/pxa-regs.h> #include <mach/pxa2xx-regs.h> .text diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 58ef08a5224b..b75353a2ec75 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -22,9 +22,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa930.h> + +#include <mach/pxa930.h> #include <mach/pxafb.h> #include <mach/pxa27x_keypad.h> diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 95656a72268d..8eb3830fbb0b 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -22,8 +22,7 @@ #include <asm/div64.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> +#include <mach/regs-ost.h> /* * This is PXA's sched_clock implementation. This has a resolution diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 3332e5d0356c..66b13802c99d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -36,8 +36,8 @@ #include <asm/setup.h> #include <asm/mach-types.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> + +#include <mach/pxa25x.h> #include <mach/reset.h> #include <mach/irda.h> #include <mach/i2c.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index a72e3add743c..f79c9cb70ae4 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -39,10 +39,7 @@ #include <asm/mach/irq.h> #include <asm/mach/flash.h> -#include <mach/hardware.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/pxa2xx_spi.h> #include <mach/trizeps4.h> #include <mach/audio.h> diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 4b3120dbc049..0e65344e9f53 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -42,12 +42,9 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <mach/pxa-regs.h> -#include <mach/pxa2xx-regs.h> -#include <mach/bitfield.h> +#include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa25x.h> #include <mach/i2c.h> #include <mach/viper.h> @@ -956,7 +953,7 @@ static struct map_desc viper_io_desc[] __initdata = { }, { .virtual = VIPER_PC104IO_BASE, - .pfn = __phys_to_pfn(_PCMCIA1IO), + .pfn = __phys_to_pfn(0x30000000), .length = 0x00800000, .type = MT_DEVICE, }, diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 46538885a58a..c1f73205d078 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -18,9 +18,9 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/i2c/pca953x.h> +#include <linux/gpio.h> -#include <asm/gpio.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include <mach/i2c.h> #include <mach/zylonite.h> diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 28e4e623780b..4e1c488c6906 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/gpio.h> -#include <mach/mfp-pxa320.h> +#include <mach/pxa320.h> #include <mach/zylonite.h> #include "generic.h" |