diff options
Diffstat (limited to 'arch/arm/mach-imx/Kconfig')
| -rw-r--r-- | arch/arm/mach-imx/Kconfig | 375 |
1 files changed, 18 insertions, 357 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e7d7b90e2cf8..52902782cc5f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -47,371 +47,26 @@ config HAVE_IMX_SRC def_bool y if SMP select ARCH_HAS_RESET_CONTROLLER -config IMX_HAVE_IOMUX_V1 - bool +if ARCH_MULTI_V6 -config ARCH_MXC_IOMUX_V3 - bool - -config SOC_IMX21 - bool - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - -config SOC_IMX27 - bool - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - select PINCTRL_IMX27 +comment "ARM1136 platforms" config SOC_IMX31 - bool + bool "i.MX31 support" select CPU_V6 select MXC_AVIC + help + This enables support for Freescale i.MX31 processor config SOC_IMX35 - bool - select ARCH_MXC_IOMUX_V3 + bool "i.MX35 support" select MXC_AVIC select PINCTRL_IMX35 - -if ARCH_MULTI_V5 - -comment "MX21 platforms:" - -config MACH_MX21ADS - bool "MX21ADS platform" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select SOC_IMX21 - help - Include support for MX21ADS platform. This includes specific - configurations for the board and its peripherals. - -comment "MX27 platforms:" - -config MACH_MX27ADS - bool "MX27ADS platform" - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select SOC_IMX27 - help - Include support for MX27ADS platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX27_3DS - bool "MX27PDK platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MX2_CAMERA - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for MX27PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_IMX27_VISSTRIM_M10 - bool "Vista Silicon i.MX27 Visstrim_m10" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MX2_CAMERA - select IMX_HAVE_PLATFORM_MX2_EMMA - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select LEDS_GPIO_REGISTER - select SOC_IMX27 - help - Include support for Visstrim_m10 platform and its different variants. - This includes specific configurations for the board and its - peripherals. - -config MACH_PCA100 - bool "Phytec phyCARD-s (pca100)" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX27 - help - Include support for phyCARD-s (aka pca100) platform. This - includes specific configurations for the module and its peripherals. - -config MACH_IMX27_DT - bool "Support i.MX27 platforms from device tree" - select SOC_IMX27 - help - Include support for Freescale i.MX27 based platforms - using the device tree for discovery - -endif - -if ARCH_MULTI_V6 - -comment "MX31 platforms:" - -config MACH_MX31ADS - bool "Support MX31ADS platforms" - default y - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for MX31ADS platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31ADS_WM1133_EV1 - bool "Support Wolfson Microelectronics 1133-EV1 module" - depends on MACH_MX31ADS - depends on MFD_WM8350_I2C - depends on REGULATOR_WM8350 = y help - Include support for the Wolfson Microelectronics 1133-EV1 PMU - and audio module for the MX31ADS platform. - -config MACH_MX31LILLY - bool "Support MX31 LILLY-1131 platforms (INCO startec)" - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for mx31 based LILLY1131 modules. This includes - specific configurations for the board and its peripherals. - -config MACH_MX31LITE - bool "Support MX31 LITEKIT (LogicPD)" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_RTC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for MX31 LITEKIT platform. This includes specific - configurations for the board and its peripherals. - -config MACH_PCM037 - bool "Support Phytec pcm037 (i.MX31) platforms" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_W1 - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for Phytec pcm037 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_PCM037_EET - bool "Support pcm037 EET board extensions" - depends on MACH_PCM037 - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_SPI_IMX - help - Add support for PCM037 EET baseboard extensions. If you are using the - OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel - command-line parameter. - -config MACH_MX31_3DS - bool "Support MX31PDK (3DS)" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for MX31PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX31_3DS_MXC_NAND_USE_BBT - bool "Make the MXC NAND driver use the in flash Bad Block Table" - depends on MACH_MX31_3DS - depends on MTD_NAND_MXC - help - Enable this if you want that the MXC NAND driver uses the in flash - Bad Block Table to know what blocks are bad instead of scanning the - entire flash looking for bad block markers. - -config MACH_MX31MOBOARD - bool "Support mx31moboard platforms (EPFL Mobots group)" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for mx31moboard platform. This includes specific - configurations for the board and its peripherals. - -config MACH_QONG - bool "Support Dave/DENX QongEVB-LITE platform" - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for Dave/DENX QongEVB-LITE platform. This includes - specific configurations for the board and its peripherals. - -config MACH_ARMADILLO5X0 - bool "Support Atmark Armadillo-500 Development Base Board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_MMC - select IMX_HAVE_PLATFORM_MXC_NAND - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX31 - help - Include support for Atmark Armadillo-500 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_KZM_ARM11_01 - bool "Support KZM-ARM11-01(Kyoto Microcomputer)" - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for KZM-ARM11-01. This includes specific - configurations for the board and its peripherals. - -config MACH_BUG - bool "Support Buglabs BUGBase platform" - default y - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX31 - help - Include support for BUGBase 1.3 platform. This includes specific - configurations for the board and its peripherals. - -config MACH_IMX31_DT - bool "Support i.MX31 platforms from device tree" - select SOC_IMX31 - help - Include support for Freescale i.MX31 based platforms - using the device tree for discovery. - -comment "MX35 platforms:" - -config MACH_IMX35_DT - bool "Support i.MX35 platforms from device tree" - select SOC_IMX35 - help - Include support for Freescale i.MX35 based platforms - using the device tree for discovery. - -config MACH_PCM043 - bool "Support Phytec pcm043 (i.MX35) platforms" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX35 - help - Include support for Phytec pcm043 platform. This includes - specific configurations for the board and its peripherals. - -config MACH_MX35_3DS - bool "Support MX35PDK platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_MXC_RTC - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select MXC_DEBUG_BOARD - select SOC_IMX35 - help - Include support for MX35PDK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_VPR200 - bool "Support VPR200 platform" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX35 - help - Include support for VPR200 platform. This includes specific - configurations for the board and its peripherals. + This enables support for Freescale i.MX31 processor endif -comment "Device tree only" - if ARCH_MULTI_V4T config SOC_IMX1 @@ -428,12 +83,20 @@ if ARCH_MULTI_V5 config SOC_IMX25 bool "i.MX25 support" - select ARCH_MXC_IOMUX_V3 select CPU_ARM926T select MXC_AVIC select PINCTRL_IMX25 help This enables support for Freescale i.MX25 processor + +config SOC_IMX27 + bool "i.MX27 support" + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX27 + help + This enables support for Freescale i.MX27 processor + endif if ARCH_MULTI_V7 @@ -541,10 +204,10 @@ config SOC_LS1021A endif -comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" - if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M +comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" + config SOC_IMX7D_CA7 bool select ARM_GIC @@ -607,6 +270,4 @@ endchoice endif -source "arch/arm/mach-imx/devices/Kconfig" - endif |