summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/Kconfig11
-rw-r--r--arch/arm/mach-at91/Makefile3
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c11
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c45
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c45
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c189
-rw-r--r--arch/arm/mach-at91/include/mach/at91cap9.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h22
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h130
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_sdramc.h23
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9rl.h2
-rw-r--r--arch/arm/mach-at91/include/mach/board.h2
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h10
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-at91/pm.h49
-rw-r--r--arch/arm/mach-at91/pm_slowclock.S74
18 files changed, 575 insertions, 48 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 841eaf8f27e2..939bccd70569 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -366,6 +366,17 @@ config MACH_STAMP9G20
endif
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+ bool "Bluewater Systems Snapper 9260/9G20 module"
+ help
+ Select this if you are using the Bluewater Systems Snapper 9260 or
+ Snapper 9G20 modules.
+ <http://www.bluewatersys.com/>
+endif
+
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c1f821e58222..ca2ac003f41f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,6 +66,9 @@ obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
+# AT91SAM9260/AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
+
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 85166b7e69a1..753c0d31a3d3 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
+#include <mach/cpu.h>
#include "generic.h"
#include "clock.h"
@@ -176,6 +177,13 @@ static struct clk mmc1_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
+/* Video decoder clock - Only for sam9m10/sam9m11 */
+static struct clk vdec_clk = {
+ .name = "vdec_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_VDEC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
/* One additional fake clock for ohci */
static struct clk ohci_clk = {
.name = "ohci_clk",
@@ -239,6 +247,9 @@ static void __init at91sam9g45_register_clocks(void)
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
+ clk_register(&vdec_clk);
+
clk_register(&pck0);
clk_register(&pck1);
}
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a4102d72cc9b..c49f5c003ee1 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -26,6 +26,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/at73c213.h>
#include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -235,6 +238,46 @@ static struct gpio_led ek_leds[] = {
}
};
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("AVDD", "0-001b"),
+ REGULATOR_SUPPLY("HPVDD", "0-001b"),
+ REGULATOR_SUPPLY("DBVDD", "0-001b"),
+ REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = ek_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 0,
+ .init_data = &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_vdd_pdata,
+ },
+};
+static void __init ek_add_regulators(void)
+{
+ platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
I2C_BOARD_INFO("24c512", 0x50),
@@ -256,6 +299,8 @@ static void __init ek_board_init(void)
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
+ /* Regulators */
+ ek_add_regulators();
/* MMC */
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &ek_mmc_data);
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index c11fd47aec5d..6ea9808b8868 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -27,6 +27,9 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -269,6 +272,46 @@ static void __init ek_add_device_buttons(void)
static void __init ek_add_device_buttons(void) {}
#endif
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("AVDD", "0-001b"),
+ REGULATOR_SUPPLY("HPVDD", "0-001b"),
+ REGULATOR_SUPPLY("DBVDD", "0-001b"),
+ REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = ek_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 0,
+ .init_data = &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_vdd_pdata,
+ },
+};
+static void __init ek_add_regulators(void)
+{
+ platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
static struct i2c_board_info __initdata ek_i2c_devices[] = {
{
@@ -294,6 +337,8 @@ static void __init ek_board_init(void)
ek_add_device_nand();
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
+ /* Regulators */
+ ek_add_regulators();
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
new file mode 100644
index 000000000000..2c08ae4ad3a1
--- /dev/null
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-at91/board-snapper9260.c
+ *
+ * Copyright (C) 2010 Bluewater System Ltd
+ *
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
+
+static void __init snapper9260_map_io(void)
+{
+ at91sam9260_initialize(18432000);
+
+ /* Debug on ttyS0 */
+ at91_register_uart(0, 0, 0);
+ at91_set_serial_console(0);
+
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+}
+
+static void __init snapper9260_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+static struct at91_usbh_data __initdata snapper9260_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata snapper9260_udc_data = {
+ .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5),
+ .vbus_active_low = 1,
+ .vbus_polled = 1,
+};
+
+static struct at91_eth_data snapper9260_macb_data = {
+ .is_rmii = 1,
+};
+
+static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
+ {
+ .name = "Preboot",
+ .offset = 0,
+ .size = SZ_128K,
+ },
+ {
+ .name = "Bootloader",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ },
+ {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init
+snapper9260_nand_partition_info(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
+ return snapper9260_nand_partitions;
+}
+
+static struct atmel_nand_data __initdata snapper9260_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC13,
+ .partition_info = snapper9260_nand_partition_info,
+ .bus_width_16 = 0,
+};
+
+static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 0,
+ .ncs_write_setup = 0,
+ .nwe_setup = 0,
+
+ .ncs_read_pulse = 5,
+ .nrd_pulse = 2,
+ .ncs_write_pulse = 5,
+ .nwe_pulse = 2,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE),
+ .tdf_cycles = 1,
+};
+
+static struct pca953x_platform_data snapper9260_io_expander_data = {
+ .gpio_base = SNAPPER9260_IO_EXP_GPIO(0),
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
+ {
+ /* IO expander */
+ I2C_BOARD_INFO("max7312", 0x28),
+ .platform_data = &snapper9260_io_expander_data,
+ },
+ {
+ /* Audio codec */
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+ {
+ /* RTC */
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+};
+
+static void __init snapper9260_add_device_nand(void)
+{
+ at91_set_A_periph(AT91_PIN_PC14, 0);
+ sam9_smc_configure(3, &snapper9260_nand_smc_config);
+ at91_add_device_nand(&snapper9260_nand_data);
+}
+
+static void __init snapper9260_board_init(void)
+{
+ at91_add_device_i2c(snapper9260_i2c_devices,
+ ARRAY_SIZE(snapper9260_i2c_devices));
+ at91_add_device_serial();
+ at91_add_device_usbh(&snapper9260_usbh_data);
+ at91_add_device_udc(&snapper9260_udc_data);
+ at91_add_device_eth(&snapper9260_macb_data);
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
+ ATMEL_SSC_TD | ATMEL_SSC_RD));
+ snapper9260_add_device_nand();
+}
+
+MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = snapper9260_map_io,
+ .init_irq = snapper9260_init_irq,
+ .init_machine = snapper9260_board_init,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index d8c1ededaa75..9c6af9737485 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -84,7 +84,7 @@
*/
#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index 1499b1cbffdd..976f4a6c3353 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -15,7 +15,7 @@
#ifndef AT91CAP9_DDRSDR_H
#define AT91CAP9_DDRSDR_H
-#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
+#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
#define AT91_DDRSDRC_MODE_NORMAL 0
#define AT91_DDRSDRC_MODE_NOP 1
@@ -25,10 +25,10 @@
#define AT91_DDRSDRC_MODE_EXT_LMR 5
#define AT91_DDRSDRC_MODE_DEEP 6
-#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
+#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
+#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
@@ -49,7 +49,7 @@
#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
+#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
@@ -59,13 +59,13 @@
#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
+#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
+#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_DDRSDRC_LPCB_DISABLE 0
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
@@ -80,14 +80,14 @@
#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
+#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
#define AT91_DDRSDRC_MD_DDR 2
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
+#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
@@ -98,5 +98,11 @@
#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+ at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+ at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 43c396b9b4cb..4e79036d3b80 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -84,7 +84,7 @@
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 87de8be17484..2b5618518129 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,7 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
new file mode 100644
index 000000000000..d27b15ba8ebf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -0,0 +1,130 @@
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ * Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
+#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */
+#define AT91_DDRSDRC_MODE_NORMAL 0
+#define AT91_DDRSDRC_MODE_NOP 1
+#define AT91_DDRSDRC_MODE_PRECHARGE 2
+#define AT91_DDRSDRC_MODE_LMR 3
+#define AT91_DDRSDRC_MODE_REFRESH 4
+#define AT91_DDRSDRC_MODE_EXT_LMR 5
+#define AT91_DDRSDRC_MODE_DEEP 6
+
+#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_DDRSDRC_NR_11 (0 << 2)
+#define AT91_DDRSDRC_NR_12 (1 << 2)
+#define AT91_DDRSDRC_NR_13 (2 << 2)
+#define AT91_DDRSDRC_NR_14 (3 << 2)
+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
+#define AT91_DDRSDRC_CAS_2 (2 << 4)
+#define AT91_DDRSDRC_CAS_3 (3 << 4)
+#define AT91_DDRSDRC_CAS_25 (6 << 4)
+#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */
+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
+#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */
+#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */
+#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */
+#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */
+
+#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
+#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
+#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */
+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */
+#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */
+#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */
+#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */
+#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_DDRSDRC_LPCB_DISABLE 0
+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */
+#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
+#define AT91_DDRSDRC_MD_SDR 0
+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
+#define AT91_DDRSDRC_MD_DDR2 6
+#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
+#define AT91_DDRSDRC_DBW_32BITS (0 << 4)
+#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
+
+#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
+
+#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */
+#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */
+#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */
+#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */
+#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */
+#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
+#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
+
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+ at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+ at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index b7260389f7ca..100f5a592926 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -17,7 +17,7 @@
#define AT91SAM9_SDRAMC_H
/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */
#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
#define AT91_SDRAMC_MODE_NORMAL 0
#define AT91_SDRAMC_MODE_NOP 1
@@ -27,10 +27,10 @@
#define AT91_SDRAMC_MODE_EXT_LMR 5
#define AT91_SDRAMC_MODE_DEEP 6
-#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */
#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */
#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
#define AT91_SDRAMC_NC_8 (0 << 0)
#define AT91_SDRAMC_NC_9 (1 << 0)
@@ -57,7 +57,7 @@
#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */
#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_SDRAMC_LPCB_DISABLE 0
#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
@@ -71,16 +71,21 @@
#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */
#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */
#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
#define AT91_SDRAMC_MD_SDRAM 0
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+ at91_sys_read(AT91_SDRAMC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+ at91_sys_write(AT91_SDRAMC##num + reg, value)
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index fc2de6c09c86..87ba8517ad98 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -74,7 +74,7 @@
*/
#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index df2ed848c9f8..58528aa9c8a8 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -44,6 +44,8 @@
/* USB Device */
struct at91_udc_data {
u8 vbus_pin; /* high == host powering us */
+ u8 vbus_active_low; /* vbus polarity */
+ u8 vbus_polled; /* Use polling, not interrupt */
u8 pullup_pin; /* active == D+ pulled up */
u8 pullup_active_low; /* true == pullup_pin is active low */
};
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 833659d1200a..3bef931d0b1c 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void)
#define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002
+#define ARCH_EXID_AT91SAM9G46 0x00000003
#define ARCH_EXID_AT91SAM9G45 0x00000004
static inline unsigned long at91_exid_identify(void)
@@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void)
#ifdef CONFIG_ARCH_AT91SAM9G45
#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
+#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
+#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
+#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \
+ (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
#else
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
+#define cpu_is_at91sam9m10() (0)
+#define cpu_is_at91sam9g46() (0)
+#define cpu_is_at91sam9m11() (0)
#endif
#ifdef CONFIG_ARCH_AT91CAP9
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 04c91e31c9c5..bfdd8ab26dc8 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -19,6 +19,7 @@
#define PIN_BASE NR_AIC_IRQS
#define MAX_GPIO_BANKS 5
+#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32))
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 08322c44df1a..8c87d0c1b8f8 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -30,14 +30,50 @@ static inline u32 sdram_selfrefresh_enable(void)
{
u32 saved_lpr, lpr;
- saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+ saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
return saved_lpr;
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static u32 saved_lpr1;
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ /* Those tow values allow us to delay self-refresh activation
+ * to the maximum. */
+ u32 lpr0, lpr1;
+ u32 saved_lpr0;
+
+ saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+ lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+ lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+ return saved_lpr0;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr0) \
+ do { \
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
+ } while (0)
#else
#include <mach/at91sam9_sdramc.h>
@@ -47,7 +83,6 @@ static inline u32 sdram_selfrefresh_enable(void)
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
*/
-#define AT91_SDRAMC AT91_SDRAMC0
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif
@@ -55,13 +90,13 @@ static inline u32 sdram_selfrefresh_enable(void)
{
u32 saved_lpr, lpr;
- saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+ saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
- at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
return saved_lpr;
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
#endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 9c5b48e68a71..b6b00a1f6125 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,10 +16,12 @@
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200_mc.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9_ddrsdr.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
#else
#include <mach/at91sam9_sdramc.h>
#endif
@@ -30,7 +32,6 @@
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
*/
-#define AT91_SDRAMC AT91_SDRAMC0
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif
@@ -113,12 +114,14 @@ ENTRY(at91_slow_clock)
/*
* Register usage:
* R1 = Base address of AT91_PMC
- * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+ * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* R3 = temporary register
* R4 = temporary register
+ * R5 = Base address of second RAM Controller or 0 if not present
*/
ldr r1, .at91_va_base_pmc
ldr r2, .at91_va_base_sdramc
+ ldr r5, .at91_va_base_ramc1
/* Drain write buffer */
mcr p15, 0, r0, c7, c10, 4
@@ -127,20 +130,33 @@ ENTRY(at91_slow_clock)
/* Put SDRAM in self-refresh mode */
mov r3, #1
str r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9)
- /* Enable SDRAM self-refresh mode */
- ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
- str r3, .saved_sam9_lpr
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
- mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
- str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+ /* prepare for DDRAM self-refresh mode */
+ ldr r3, [r2, #AT91_DDRSDRC_LPR]
+ str r3, .saved_sam9_lpr
+ bic r3, #AT91_DDRSDRC_LPCB
+ orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+ /* figure out if we use the second ram controller */
+ cmp r5, #0
+ ldrne r4, [r5, #AT91_DDRSDRC_LPR]
+ strne r4, .saved_sam9_lpr1
+ bicne r4, #AT91_DDRSDRC_LPCB
+ orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+ /* Enable DDRAM self-refresh mode */
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+ strne r4, [r5, #AT91_DDRSDRC_LPR]
#else
/* Enable SDRAM self-refresh mode */
- ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ ldr r3, [r2, #AT91_SDRAMC_LPR]
str r3, .saved_sam9_lpr
- mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
- str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ bic r3, #AT91_SDRAMC_LPCB
+ orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str r3, [r2, #AT91_SDRAMC_LPR]
#endif
/* Save Master clock setting */
@@ -247,14 +263,21 @@ ENTRY(at91_slow_clock)
#ifdef CONFIG_ARCH_AT91RM9200
/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9)
- /* Restore LPR on AT91CAP9 */
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
+ /* Restore LPR on AT91 with DDRAM */
ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+ /* if we use the second ram controller */
+ cmp r5, #0
+ ldrne r4, .saved_sam9_lpr1
+ strne r4, [r5, #AT91_DDRSDRC_LPR]
+
#else
- /* Restore LPR on AT91SAM9 */
+ /* Restore LPR on AT91 with SDRAM */
ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+ str r3, [r2, #AT91_SDRAMC_LPR]
#endif
/* Restore registers, and return */
@@ -273,18 +296,29 @@ ENTRY(at91_slow_clock)
.saved_sam9_lpr:
.word 0
+.saved_sam9_lpr1:
+ .word 0
+
.at91_va_base_pmc:
.word AT91_VA_BASE_SYS + AT91_PMC
#ifdef CONFIG_ARCH_AT91RM9200
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_DDRSDRC
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC0
#else
.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_SDRAMC
+ .word AT91_VA_BASE_SYS + AT91_SDRAMC0
+#endif
+
+.at91_va_base_ramc1:
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC1
+#else
+ .word 0
#endif
ENTRY(at91_slow_clock_sz)