7 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt
index bb775fbe43d7..8b930946c52a 100644
--- a/Documentation/cgroups/cpuacct.txt
+++ b/Documentation/cgroups/cpuacct.txt
@@ -30,3 +30,21 @@ The above steps create a new group g1 and move the current shell
 process (bash) into it. CPU time consumed by this bash and its children
 can be obtained from g1/cpuacct.usage and the same is accumulated in
 /cgroups/cpuacct.usage also.
+
+cpuacct.stat file lists a few statistics which further divide the
+CPU time obtained by the cgroup into user and system times. Currently
+the following statistics are supported:
+
+user: Time spent by tasks of the cgroup in user mode.
+system: Time spent by tasks of the cgroup in kernel mode.
+
+user and system are in USER_HZ unit.
+
+cpuacct controller uses percpu_counter interface to collect user and
+system times. This has two side effects:
+
+- It is theoretically possible to see wrong values for user and system times.
+  This is because percpu_counter_read() on 32bit systems isn't safe
+  against concurrent writes.
+- It is possible to see slightly outdated values for user and system times
+  due to the batch processing nature of percpu_counter.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 7e2af10e8264..de491a3e2313 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -428,3 +428,12 @@ Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
 	After a reasonable transition period, we will remove the legacy
 	fakephp interface.
 Who:	Alex Chiang <achiang@hp.com>
+
+---------------------------
+
+What:	i2c-voodoo3 driver
+When:	October 2009
+Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
+	driver but this caused driver conflicts.
+Who:	Jean Delvare <khali@linux-fr.org>
+	Krzysztof Helt <krzysztof.h1@wp.pl>
diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt
index 864ff3283780..6d40f00b358c 100644
--- a/Documentation/infiniband/ipoib.txt
+++ b/Documentation/infiniband/ipoib.txt
@@ -24,6 +24,49 @@ Partitions and P_Keys
   The P_Key for any interface is given by the "pkey" file, and the
   main interface for a subinterface is in "parent."
 
+Datagram vs Connected modes
+
+  The IPoIB driver supports two modes of operation: datagram and
+  connected.  The mode is set and read through an interface's
+  /sys/class/net/<intf name>/mode file.
+
+  In datagram mode, the IB UD (Unreliable Datagram) transport is used
+  and so the interface MTU has is equal to the IB L2 MTU minus the
+  IPoIB encapsulation header (4 bytes).  For example, in a typical IB
+  fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes.
+
+  In connected mode, the IB RC (Reliable Connected) transport is used.
+  Connected mode is to takes advantage of the connected nature of the
+  IB transport and allows an MTU up to the maximal IP packet size of
+  64K, which reduces the number of IP packets needed for handling
+  large UDP datagrams, TCP segments, etc and increases the performance
+  for large messages.
+
+  In connected mode, the interface's UD QP is still used for multicast
+  and communication with peers that don't support connected mode. In
+  this case, RX emulation of ICMP PMTU packets is used to cause the
+  networking stack to use the smaller UD MTU for these neighbours.
+
+Stateless offloads
+
+  If the IB HW supports IPoIB stateless offloads, IPoIB advertises
+  TCP/IP checksum and/or Large Send (LSO) offloading capability to the
+  network stack.
+
+  Large Receive (LRO) offloading is also implemented and may be turned
+  on/off using ethtool calls.  Currently LRO is supported only for
+  checksum offload capable devices.
+
+  Stateless offloads are supported only in datagram mode.  
+
+Interrupt moderation
+
+  If the underlying IB device supports CQ event moderation, one can
+  use ethtool to set interrupt mitigation parameters and thus reduce
+  the overhead incurred by handling interrupts.  The main code path of
+  IPoIB doesn't use events for TX completion signaling so only RX
+  moderation is supported.
+
 Debugging Information
 
   By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set
@@ -55,3 +98,5 @@ References
     http://ietf.org/rfc/rfc4391.txt 
   IP over InfiniBand (IPoIB) Architecture (RFC 4392)
     http://ietf.org/rfc/rfc4392.txt 
+  IP over InfiniBand: Connected Mode (RFC 4755)
+    http://ietf.org/rfc/rfc4755.txt
diff --git a/Documentation/ftrace.txt b/Documentation/trace/ftrace.txt
index fd9a3e693813..fd9a3e693813 100644
--- a/Documentation/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
diff --git a/Documentation/vm/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
index a956d9b7f943..a956d9b7f943 100644
--- a/Documentation/vm/kmemtrace.txt
+++ b/Documentation/trace/kmemtrace.txt
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/trace/mmiotrace.txt
index 5731c67abc55..5731c67abc55 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/trace/mmiotrace.txt
diff --git a/Documentation/tracepoints.txt b/Documentation/trace/tracepoints.txt
index c0e1ceed75a4..c0e1ceed75a4 100644
--- a/Documentation/tracepoints.txt
+++ b/Documentation/trace/tracepoints.txt