diff options
Diffstat (limited to 'Documentation/openrisc/README')
| -rw-r--r-- | Documentation/openrisc/README | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/Documentation/openrisc/README b/Documentation/openrisc/README new file mode 100644 index 000000000000..072069ab5100 --- /dev/null +++ b/Documentation/openrisc/README @@ -0,0 +1,99 @@ +OpenRISC Linux +============== + +This is a port of Linux to the OpenRISC class of microprocessors; the initial +target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k). + +For information about OpenRISC processors and ongoing development: + + website http://openrisc.io + +For more information about Linux on OpenRISC, please contact South Pole AB. + + email: info@southpole.se + + website: http://southpole.se + http://southpoleconsulting.com + +--------------------------------------------------------------------- + +Build instructions for OpenRISC toolchain and Linux +=================================================== + +In order to build and run Linux for OpenRISC, you'll need at least a basic +toolchain and, perhaps, the architectural simulator. Steps to get these bits +in place are outlined here. + +1) The toolchain can be obtained from openrisc.io. Instructions for building +a toolchain can be found at: + +https://github.com/openrisc/tutorials + +2) or1ksim (optional) + +or1ksim is the architectural simulator which will allow you to actually run +your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand. + + git clone https://github.com/openrisc/or1ksim.git + + cd or1ksim + ./configure --prefix=$OPENRISC_PREFIX + make + make install + +3) Linux kernel + +Build the kernel as usual + + make ARCH=openrisc defconfig + make ARCH=openrisc + +4) Run in architectural simulator + +Grab the or1ksim platform configuration file (from the or1ksim source) and +together with your freshly built vmlinux, run your kernel with the following +incantation: + + sim -f arch/openrisc/or1ksim.cfg vmlinux + +--------------------------------------------------------------------- + +Terminology +=========== + +In the code, the following particles are used on symbols to limit the scope +to more or less specific processor implementations: + +openrisc: the OpenRISC class of processors +or1k: the OpenRISC 1000 family of processors +or1200: the OpenRISC 1200 processor + +--------------------------------------------------------------------- + +History +======== + +18. 11. 2003 Matjaz Breskvar (phoenix@bsemi.com) + initial port of linux to OpenRISC/or32 architecture. + all the core stuff is implemented and seams usable. + +08. 12. 2003 Matjaz Breskvar (phoenix@bsemi.com) + complete change of TLB miss handling. + rewrite of exceptions handling. + fully functional sash-3.6 in default initrd. + a much improved version with changes all around. + +10. 04. 2004 Matjaz Breskvar (phoenix@bsemi.com) + alot of bugfixes all over. + ethernet support, functional http and telnet servers. + running many standard linux apps. + +26. 06. 2004 Matjaz Breskvar (phoenix@bsemi.com) + port to 2.6.x + +30. 11. 2004 Matjaz Breskvar (phoenix@bsemi.com) + lots of bugfixes and enhancments. + added opencores framebuffer driver. + +09. 10. 2010 Jonas Bonn (jonas@southpole.se) + major rewrite to bring up to par with upstream Linux 2.6.36 |