diff options
Diffstat (limited to 'Documentation/devicetree')
238 files changed, 5294 insertions, 510 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt new file mode 100644 index 000000000000..3bc7ea575564 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/actions.txt @@ -0,0 +1,39 @@ +Actions Semi platforms device tree bindings +------------------------------------------- + + +S500 SoC +======== + +Required root node properties: + + - compatible : must contain "actions,s500" + + +Modules: + +Root node property compatible must contain, depending on module: + + - LeMaker Guitar: "lemaker,guitar" + + +Boards: + +Root node property compatible must contain, depending on board: + + - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" + + +S900 SoC +======== + +Required root node properties: + +- compatible : must contain "actions,s900" + + +Boards: + +Root node property compatible must contain, depending on board: + + - uCRobotics Bubblegum-96: "ucrobotics,bubblegum-96" diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index bfd5b558477d..0fff40a6330d 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -29,26 +29,35 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; -Board compatible values: +Board compatible values (alphabetically, grouped by SoC): + - "geniatech,atv1200" (Meson6) + - "minix,neo-x8" (Meson8) - - "tronfy,mxq" (Meson8b) + - "hardkernel,odroid-c1" (Meson8b) + - "tronfy,mxq" (Meson8b) + + - "amlogic,p200" (Meson gxbb) + - "amlogic,p201" (Meson gxbb) + - "friendlyarm,nanopi-k2" (Meson gxbb) + - "hardkernel,odroid-c2" (Meson gxbb) + - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb) - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb) - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb) - - "hardkernel,odroid-c2" (Meson gxbb) - - "amlogic,p200" (Meson gxbb) - - "amlogic,p201" (Meson gxbb) - "wetek,hub" (Meson gxbb) - "wetek,play2" (Meson gxbb) + - "amlogic,p212" (Meson gxl s905x) + - "hwacom,amazetv" (Meson gxl s905x) - "khadas,vim" (Meson gxl s905x) + - "libretech,cc" (Meson gxl s905x) - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) - - "hwacom,amazetv" (Meson gxl s905x) + - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) - - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) + - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 799af90dd75b..91cb8e4f2a4f 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -41,6 +41,36 @@ compatible: must be one of: - "atmel,sama5d43" - "atmel,sama5d44" + * "atmel,samv7" for MCUs using a Cortex-M7, shall be extended with the specific + SoC family: + o "atmel,sams70" shall be extended with the specific MCU compatible: + - "atmel,sams70j19" + - "atmel,sams70j20" + - "atmel,sams70j21" + - "atmel,sams70n19" + - "atmel,sams70n20" + - "atmel,sams70n21" + - "atmel,sams70q19" + - "atmel,sams70q20" + - "atmel,sams70q21" + o "atmel,samv70" shall be extended with the specific MCU compatible: + - "atmel,samv70j19" + - "atmel,samv70j20" + - "atmel,samv70n19" + - "atmel,samv70n20" + - "atmel,samv70q19" + - "atmel,samv70q20" + o "atmel,samv71" shall be extended with the specific MCU compatible: + - "atmel,samv71j19" + - "atmel,samv71j20" + - "atmel,samv71j21" + - "atmel,samv71n19" + - "atmel,samv71n20" + - "atmel,samv71n21" + - "atmel,samv71q19" + - "atmel,samv71q20" + - "atmel,samv71q21" + Chipid required properties: - compatible: Should be "atmel,sama5d2-chipid" - reg : Should contain registers location and length diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt new file mode 100644 index 000000000000..23a02178dd44 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt @@ -0,0 +1,12 @@ +Broadcom Stingray device tree bindings +------------------------------------------------ + +Boards with Stingray shall have the following properties: + +Required root node property: + +Stingray Combo SVK board +compatible = "brcm,bcm958742k", "brcm,stingray"; + +Stingray SST100 board +compatible = "brcm,bcm958742t", "brcm,stingray"; diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt index 0f2153e8fa7e..9600761f2d5b 100644 --- a/Documentation/devicetree/bindings/arm/cci.txt +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -11,13 +11,6 @@ clusters, through memory mapped interface, with a global control register space and multiple sets of interface control registers, one per slave interface. -Bindings for the CCI node follow the ePAPR standard, available from: - -www.power.org/documentation/epapr-version-1-1/ - -with the addition of the bindings described in this document which are -specific to ARM. - * CCI interconnect node Description: Describes a CCI cache coherent Interconnect component @@ -50,10 +43,10 @@ specific to ARM. as a tuple of cells, containing child address, parent address and the size of the region in the child address space. - Definition: A standard property. Follow rules in the ePAPR for - hierarchical bus addressing. CCI interfaces - addresses refer to the parent node addressing - scheme to declare their register bases. + Definition: A standard property. Follow rules in the Devicetree + Specification for hierarchical bus addressing. CCI + interfaces addresses refer to the parent node + addressing scheme to declare their register bases. CCI interconnect node can define the following child nodes: diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/arm/ccn.txt index b100d3847d88..29801456c9ee 100644 --- a/Documentation/devicetree/bindings/arm/ccn.txt +++ b/Documentation/devicetree/bindings/arm/ccn.txt @@ -3,6 +3,7 @@ Required properties: - compatible: (standard compatible string) should be one of: + "arm,ccn-502" "arm,ccn-504" "arm,ccn-508" diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt new file mode 100644 index 000000000000..298291211ea4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt @@ -0,0 +1,49 @@ +* CoreSight CPU Debug Component: + +CoreSight CPU debug component are compliant with the ARMv8 architecture +reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The +external debug module is mainly used for two modes: self-hosted debug and +external debug, and it can be accessed from mmio region from Coresight +and eventually the debug module connects with CPU for debugging. And the +debug module provides sample-based profiling extension, which can be used +to sample CPU program counter, secure state and exception level, etc; +usually every CPU has one dedicated debug module to be connected. + +Required properties: + +- compatible : should be "arm,coresight-cpu-debug"; supplemented with + "arm,primecell" since this driver is using the AMBA bus + interface. + +- reg : physical base address and length of the register set. + +- clocks : the clock associated to this component. + +- clock-names : the name of the clock referenced by the code. Since we are + using the AMBA framework, the name of the clock providing + the interconnect should be "apb_pclk" and the clock is + mandatory. The interface between the debug logic and the + processor core is clocked by the internal CPU clock, so it + is enabled with CPU clock by default. + +- cpu : the CPU phandle the debug module is affined to. When omitted + the module is considered to belong to CPU0. + +Optional properties: + +- power-domains: a phandle to the debug power domain. We use "power-domains" + binding to turn on the debug logic if it has own dedicated + power domain and if necessary to use "cpuidle.off=1" or + "nohlt" in the kernel command line or sysfs node to + constrain idle states to ensure registers in the CPU power + domain are accessible. + +Example: + + debug@f6590000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf6590000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + }; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 1030f5f50207..a44253cad269 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -6,9 +6,9 @@ The device tree allows to describe the layout of CPUs in a system through the "cpus" node, which in turn contains a number of subnodes (ie "cpu") defining properties for every cpu. -Bindings for CPU nodes follow the ePAPR v1.1 standard, available from: +Bindings for CPU nodes follow the Devicetree Specification, available from: -https://www.power.org/documentation/epapr-version-1-1/ +https://www.devicetree.org/specifications/ with updates for 32-bit and 64-bit ARM systems provided in this document. @@ -16,8 +16,8 @@ with updates for 32-bit and 64-bit ARM systems provided in this document. Convention used in this document ================================ -This document follows the conventions described in the ePAPR v1.1, with -the addition: +This document follows the conventions described in the Devicetree +Specification, with the addition: - square brackets define bitfields, eg reg[7:0] value of the bitfield in the reg property contained in bits 7 down to 0 @@ -26,8 +26,9 @@ the addition: cpus and cpu node bindings definition ===================================== -The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu -nodes to be present and contain the properties described below. +The ARM architecture, in accordance with the Devicetree Specification, +requires the cpus and cpu nodes to be present and contain the properties +described below. - cpus node @@ -193,6 +194,7 @@ nodes to be present and contain the properties described below. "spin-table" # On ARM 32-bit systems this property is optional and can be one of: + "actions,s500-smp" "allwinner,sun6i-a31" "allwinner,sun8i-a23" "arm,realview-smp" @@ -249,7 +251,7 @@ nodes to be present and contain the properties described below. Usage: Optional Value type: <u32> Definition: - # u32 value representing CPU capacity [3] in + # u32 value representing CPU capacity [4] in DMIPS/MHz, relative to highest capacity-dmips-mhz in the system. @@ -476,5 +478,5 @@ cpus { [2] arm/msm/qcom,kpss-acc.txt [3] ARM Linux kernel documentation - idle states bindings Documentation/devicetree/bindings/arm/idle-states.txt -[3] ARM Linux kernel documentation - cpu capacity bindings +[4] ARM Linux kernel documentation - cpu capacity bindings Documentation/devicetree/bindings/arm/cpu-capacity.txt diff --git a/Documentation/devicetree/bindings/arm/gemini.txt b/Documentation/devicetree/bindings/arm/gemini.txt index 0041eb031116..55bf7ce96c44 100644 --- a/Documentation/devicetree/bindings/arm/gemini.txt +++ b/Documentation/devicetree/bindings/arm/gemini.txt @@ -24,6 +24,19 @@ Required nodes: global control registers, with the compatible string "cortina,gemini-syscon", "syscon"; + Required properties on the syscon: + - reg: syscon register location and size. + - #clock-cells: should be set to <1> - the system controller is also a + clock provider. + - #reset-cells: should be set to <1> - the system controller is also a + reset line provider. + + The clock sources have shorthand defines in the include file: + <dt-bindings/clock/cortina,gemini-clock.h> + + The reset lines have shorthand defines in the include file: + <dt-bindings/reset/cortina,gemini-reset.h> + - timer: the soc bus node must have a timer node pointing to the SoC timer block, with the compatible string "cortina,gemini-timer" See: clocksource/cortina,gemini-timer.txt @@ -56,12 +69,15 @@ Example: syscon: syscon@40000000 { compatible = "cortina,gemini-syscon", "syscon"; reg = <0x40000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; }; uart0: serial@42000000 { compatible = "ns16550a"; reg = <0x42000000 0x100>; - clock-frequency = <48000000>; + resets = <&syscon GEMINI_RESET_UART>; + clocks = <&syscon GEMINI_CLK_UART>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; }; @@ -73,12 +89,18 @@ Example: interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ + resets = <&syscon GEMINI_RESET_TIMER>; + /* APB clock or RTC clock */ + clocks = <&syscon GEMINI_CLK_APB>, + <&syscon GEMINI_CLK_RTC>; + clock-names = "PCLK", "EXTCLK"; syscon = <&syscon>; }; intcon: interrupt-controller@48000000 { compatible = "cortina,gemini-interrupt-controller"; reg = <0x48000000 0x1000>; + resets = <&syscon GEMINI_RESET_INTCON0>; interrupt-controller; #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 2e732152064b..7111fbc82a4e 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -4,6 +4,10 @@ Hi3660 SoC Required root node properties: - compatible = "hisilicon,hi3660"; +HiKey960 Board +Required root node properties: + - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; + Hi3798cv200 SoC Required root node properties: - compatible = "hisilicon,hi3798cv200"; diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index b8e41c148a3c..7a591333f2b1 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -695,5 +695,5 @@ cpus { [4] ARM Architecture Reference Manuals http://infocenter.arm.com/help/index.jsp -[5] ePAPR standard - https://www.power.org/documentation/epapr-version-1-1/ +[5] Devicetree Specification + https://www.devicetree.org/specifications/ diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt index 48f6703a28c8..f310bad04483 100644 --- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt +++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt @@ -37,3 +37,6 @@ Boards: - K2G EVM compatible = "ti,k2g-evm", "ti,k2g", "ti-keystone" + +- K2G Industrial Communication Engine EVM + compatible = "ti,k2g-ice", "ti,k2g", "ti-keystone" diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt index d9650c1788f4..fbe6cb21f4cf 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.txt +++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt @@ -4,8 +4,8 @@ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ PL310 and variants) based level 2 cache controller. All these various implementations of the L2 cache controller have compatible programming models (Note 1). Some of the properties that are just prefixed "cache-*" are taken from section -3.7.3 of the ePAPR v1.1 specification which can be found at: -https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf +3.7.3 of the Devicetree Specification which can be found at: +https://www.devicetree.org/specifications/ The ARM L2 cache representation in the device tree should be done as follows: diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt index 8968371d84e2..0b887440e08a 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt @@ -7,6 +7,14 @@ registers giving access to numerous features: clocks, pin-muxing and many other SoC configuration items. This DT binding allows to describe this system controller. +For the top level node: + - compatible: must be: "syscon", "simple-mfd"; + - reg: register area of the AP806 system controller + +Clocks: +------- + + The Device Tree node representing the AP806 system controller provides a number of clocks: @@ -17,19 +25,76 @@ a number of clocks: Required properties: - - compatible: must be: - "marvell,ap806-system-controller", "syscon" - - reg: register area of the AP806 system controller + - compatible: must be: "marvell,ap806-clock" - #clock-cells: must be set to 1 - - clock-output-names: must be defined to: - "ap-cpu-cluster-0", "ap-cpu-cluster-1", "ap-fixed", "ap-mss" + +Pinctrl: +-------- + +For common binding part and usage, refer to +Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. + +Required properties: +- compatible must be "marvell,ap806-pinctrl", + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, sdio(clk), spi0(clk) +mpp1 1 gpio, sdio(cmd), spi0(miso) +mpp2 2 gpio, sdio(d0), spi0(mosi) +mpp3 3 gpio, sdio(d1), spi0(cs0n) +mpp4 4 gpio, sdio(d2), i2c0(sda) +mpp5 5 gpio, sdio(d3), i2c0(sdk) +mpp6 6 gpio, sdio(ds) +mpp7 7 gpio, sdio(d4), uart1(rxd) +mpp8 8 gpio, sdio(d5), uart1(txd) +mpp9 9 gpio, sdio(d6), spi0(cs1n) +mpp10 10 gpio, sdio(d7) +mpp11 11 gpio, uart0(txd) +mpp12 12 gpio, sdio(pw_off), sdio(hw_rst) +mpp13 13 gpio +mpp14 14 gpio +mpp15 15 gpio +mpp16 16 gpio +mpp17 17 gpio +mpp18 18 gpio +mpp19 19 gpio, uart0(rxd), sdio(pw_off) + +GPIO: +----- +For common binding part and usage, refer to +Documentation/devicetree/bindings/gpio/gpio-mvebu.txt. + +Required properties: + +- compatible: "marvell,armada-8k-gpio" + +- offset: offset address inside the syscon block Example: +ap_syscon: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x1000>; - syscon: system-controller@6f4000 { - compatible = "marvell,ap806-system-controller", "syscon"; + ap_clk: clock { + compatible = "marvell,ap806-clock"; #clock-cells = <1>; - clock-output-names = "ap-cpu-cluster-0", "ap-cpu-cluster-1", - "ap-fixed", "ap-mss"; - reg = <0x6f4000 0x1000>; }; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + }; + + ap_gpio: gpio { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <19>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 19>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt index 07dbb358182c..171d02cadea4 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt @@ -7,6 +7,13 @@ Controller 0 and System Controller 1. This Device Tree binding allows to describe the first system controller, which provides registers to configure various aspects of the SoC. +For the top level node: + - compatible: must be: "syscon", "simple-mfd"; + - reg: register area of the CP110 system controller 0 + +Clocks: +------- + The Device Tree node representing this System Controller 0 provides a number of clocks: @@ -27,6 +34,7 @@ The following clocks are available: - 0 2 EIP - 0 3 Core - 0 4 NAND core + - 0 5 SDIO core - Gatable clocks - 1 0 Audio - 1 1 Comm Unit @@ -56,28 +64,126 @@ The following clocks are available: Required properties: - compatible: must be: - "marvell,cp110-system-controller0", "syscon"; - - reg: register area of the CP110 system controller 0 + "marvell,cp110-clock" - #clock-cells: must be set to 2 - - core-clock-output-names must be set to: - "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core" - - gate-clock-output-names must be set to: - "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", - "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", - "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", - "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", - "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; + +Pinctrl: +-------- + +For common binding part and usage, refer to the file +Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. + +Required properties: + +- compatible: "marvell,armada-7k-pinctrl", + "marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl" + depending on the specific variant of the SoC being used. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio) +mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc) +mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc) +mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio) +mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc) +mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio) +mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse) +mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk) +mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk) +mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk) +mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act) +mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act) +mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk) +mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso) +mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn) +mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp) +mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk) +mpp17 17 gpio, dev(ad5), ge0(txd3) +mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp) +mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp) +mpp20 20 gpio, dev(ad2), ge0(txd0) +mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp) +mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp) +mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp) +mpp24 24 gpio, dev(a0), au(i2slrclk) +mpp25 25 gpio, dev(oen), au(i2sdo_spdifo) +mpp26 26 gpio, dev(wen0), au(i2sbclk) +mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp) +mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data) +mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb) +mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk) +mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc) +mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0 +mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1 +mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2 +mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3 +mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5 +mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp) +mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp) +mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0 +mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1 +mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp) +mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4 +mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp) +mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp) +mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn) +mpp46 46 gpio, ge1(txd1), uart1(rts) +mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc) +mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp) +mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp) +mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11) +mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) +mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) +mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) +mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect) +mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect) +mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) +mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) +mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) +mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1) +mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2) +mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3) +mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc) + +GPIO: +----- + +For common binding part and usage, refer to +Documentation/devicetree/bindings/gpio/gpio-mvebu.txt. + +Required properties: + +- compatible: "marvell,armada-8k-gpio" + +- offset: offset address inside the syscon block Example: - cpm_syscon0: system-controller@440000 { - compatible = "marvell,cp110-system-controller0", "syscon"; - reg = <0x440000 0x1000>; +cpm_syscon0: system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x1000>; + + cpm_clk: clock { + compatible = "marvell,cp110-clock"; #clock-cells = <2>; - core-clock-output-names = "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core"; - gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", - "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", - "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", - "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", - "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; }; + + cpm_pinctrl: pinctrl { + compatible = "marvell,armada-8k-cpm-pinctrl"; + }; + + cpm_gpio1: gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cpm_pinctrl 0 0 32>; + status = "disabled"; + }; + +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index c860b245d8c8..da7bd138e6f2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -12,6 +12,8 @@ compatible: Must contain one of "mediatek,mt6592" "mediatek,mt6755" "mediatek,mt6795" + "mediatek,mt6797" + "mediatek,mt7622" "mediatek,mt7623" "mediatek,mt8127" "mediatek,mt8135" @@ -38,6 +40,12 @@ Supported boards: - Evaluation board for MT6795(Helio X10): Required root node properties: - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; +- Evaluation board for MT6797(Helio X20): + Required root node properties: + - compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; +- Reference board variant 1 for MT7622: + Required root node properties: + - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; - Evaluation board for MT7623: Required root node properties: - compatible = "mediatek,mt7623-evb", "mediatek,mt7623"; diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt new file mode 100644 index 000000000000..13d755787b4f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/realtek.txt @@ -0,0 +1,20 @@ +Realtek platforms device tree bindings +-------------------------------------- + + +RTD1295 SoC +=========== + +Required root node properties: + + - compatible : must contain "realtek,rtd1295" + + +Root node property compatible must contain, depending on board: + + - Zidoo X9S: "zidoo,x9s" + + +Example: + + compatible = "zidoo,x9s", "realtek,rtd1295"; diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index c965d99e86c2..11c0ac4a2d56 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -42,6 +42,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288"; +- Firefly Firefly-RK3399 board: + Required root node properties: + - compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; @@ -138,9 +142,9 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; -- Rockchip RK1108 Evaluation board +- Rockchip RV1108 Evaluation board Required root node properties: - - compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; + - compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; - Rockchip RK3368 evb: Required root node properties: diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 170fe0562c63..1a671e329864 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -55,12 +55,19 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" + - GR-Peach (X28A-M01-E/F) + compatible = "renesas,gr-peach", "renesas,r7s72100" - Gose (RTP0RC7793SEB00010S) compatible = "renesas,gose", "renesas,r8a7793" - - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S) + - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) + H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) compatible = "renesas,h3ulcb", "renesas,r8a7795"; - Henninger compatible = "renesas,henninger", "renesas,r8a7791" + - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) + compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" + - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) + compatible = "iwave,g20m", "renesas,r8a7743" - Koelsch (RTP0RC7791SEB00010S) compatible = "renesas,koelsch", "renesas,r8a7791" - Kyoto Microcomputer Co. KZM-A9-Dual @@ -69,7 +76,7 @@ Boards: compatible = "renesas,kzm9g", "renesas,sh73a0" - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S) + - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) compatible = "renesas,m3ulcb", "renesas,r8a7796"; - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" @@ -81,6 +88,8 @@ Boards: compatible = "renesas,salvator-x", "renesas,r8a7795"; - Salvator-X (RTP0RC7796SIPB0011S) compatible = "renesas,salvator-x", "renesas,r8a7796"; + - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) + compatible = "renesas,salvator-xs", "renesas,r8a7795"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" - SK-RZG1E (YR8A77450S000BE) diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index b5a4342c1d46..7f1411bbabf7 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -29,7 +29,6 @@ board-specific compatible values: nvidia,harmony nvidia,seaboard nvidia,ventana - nvidia,whistler toradex,apalis_t30 toradex,apalis_t30-eval toradex,apalis-tk1 diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt index 1061faf5f602..de9eb0486630 100644 --- a/Documentation/devicetree/bindings/arm/topology.txt +++ b/Documentation/devicetree/bindings/arm/topology.txt @@ -29,9 +29,9 @@ corresponding to the system hierarchy; syntactically they are defined as device tree nodes. The remainder of this document provides the topology bindings for ARM, based -on the ePAPR standard, available from: +on the Devicetree Specification, available from: -http://www.power.org/documentation/epapr-version-1-1/ +https://www.devicetree.org/specifications/ If not stated otherwise, whenever a reference to a cpu node phandle is made its value must point to a cpu node compliant with the cpu node bindings as diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt index fc33ca01e9ba..7c3ca0e13de0 100644 --- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt @@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller Required properties: - reg: Physical base address and size of the controller's register area. - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls2080a etc. + chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt new file mode 100644 index 000000000000..1c3d3cc70051 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt @@ -0,0 +1,55 @@ +* Cortina Systems Gemini SATA Bridge + +The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that +takes two Faraday Technology FTIDE010 PATA controllers and bridges +them in different configurations to two SATA ports. + +Required properties: +- compatible: should be + "cortina,gemini-sata-bridge" +- reg: registers and size for the block +- resets: phandles to the reset lines for both SATA bridges +- reset-names: must be "sata0", "sata1" +- clocks: phandles to the compulsory peripheral clocks +- clock-names: must be "SATA0_PCLK", "SATA1_PCLK" +- syscon: a phandle to the global Gemini system controller +- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for + the ATA controller and SATA bridges. Values 0..3: + Mode 0: ata0 master <-> sata0 + ata1 master <-> sata1 + ata0 slave interface brought out on IDE pads + Mode 1: ata0 master <-> sata0 + ata1 master <-> sata1 + ata1 slave interface brought out on IDE pads + Mode 2: ata1 master <-> sata1 + ata1 slave <-> sata0 + ata0 master and slave interfaces brought out + on IDE pads + Mode 3: ata0 master <-> sata0 + ata0 slave <-> sata1 + ata1 master and slave interfaces brought out + on IDE pads + +Optional boolean properties: +- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection. + The muxmode setting decides whether ATA0 or ATA1 is brought out, + and whether master, slave or both interfaces get brought out. +- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge + inside the Gemnini SoC. The Muxmode decides what PATA blocks will + be muxed out and how. + +Example: + +sata: sata@46000000 { + compatible = "cortina,gemini-sata-bridge"; + reg = <0x46000000 0x100>; + resets = <&rcon 26>, <&rcon 27>; + reset-names = "sata0", "sata1"; + clocks = <&gcc GEMINI_CLK_GATE_SATA0>, + <&gcc GEMINI_CLK_GATE_SATA1>; + clock-names = "SATA0_PCLK", "SATA1_PCLK"; + syscon = <&syscon>; + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-ide-pins; + cortina,gemini-enable-sata-bridge; +}; diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt new file mode 100644 index 000000000000..a0c64a29104d --- /dev/null +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt @@ -0,0 +1,38 @@ +* Faraday Technology FTIDE010 PATA controller + +This controller is the first Faraday IDE interface block, used in the +StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini +platform. The controller can do PIO modes 0 through 4, Multi-word DMA +(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6. + +On the Gemini platform, this PATA block is accompanied by a PATA to +SATA bridge in order to support SATA. This is why a phandle to that +controller is compulsory on that platform. + +The timing properties are unique per-SoC, not per-board. + +Required properties: +- compatible: should be one of + "cortina,gemini-pata", "faraday,ftide010" + "faraday,ftide010" +- interrupts: interrupt for the block +- reg: registers and size for the block + +Optional properties: +- clocks: a SoC clock running the peripheral. +- clock-names: should be set to "PCLK" for the peripheral clock. + +Required properties for "cortina,gemini-pata" compatible: +- sata: a phande to the Gemini PATA to SATA bridge, see + cortina,gemini-sata-bridge.txt for details. + +Example: + +ata@63000000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63000000 0x100>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GEMINI_CLK_GATE_IDE>; + clock-names = "PCLK"; + sata = <&sata>; +}; diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt index 1eceefb20f01..8a6c3c2e58fe 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt @@ -3,7 +3,8 @@ Broadcom GISB bus Arbiter controller Required properties: - compatible: - "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips + "brcm,bcm7278-gisb-arb" for V7 28nm chips + "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips "brcm,bcm7435-gisb-arb" for newer 40nm chips "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips "brcm,bcm7038-gisb-arb" for 130nm chips diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt index d032237512c2..6f15037131ed 100644 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt @@ -10,7 +10,7 @@ enabled for child devices connected to the bus (either on-SoC or externally) to function. While "simple-pm-bus" follows the "simple-bus" set of properties, as specified -in ePAPR, it is not an extension of "simple-bus". +in the Devicetree Specification, it is not an extension of "simple-bus". Required properties: diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index b5e39af4ddc0..dee3f5d9df26 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -10,7 +10,8 @@ stdout-path property -------------------- Device trees may specify the device to be used for boot console output -with a stdout-path property under /chosen, as described in ePAPR, e.g. +with a stdout-path property under /chosen, as described in the Devicetree +Specification, e.g. / { chosen { diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 2b7b3fa588d7..606da38c0959 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -1,11 +1,14 @@ -* Amlogic Meson8b Clock and Reset Unit +* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit -The Amlogic Meson8b clock controller generates and supplies clock to various -controllers within the SoC. +The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and +supplies clock to various controllers within the SoC. Required Properties: -- compatible: should be "amlogic,meson8b-clkc" +- compatible: must be one of: + - "amlogic,meson8-clkc" for Meson8 (S802) SoCs + - "amlogic,meson8b-clkc" for Meson8 (S805) SoCs + - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs - reg: it must be composed by two tuples: 0) physical base address of the xtal register and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index 6f66e9aa354c..f2c5f0e4a363 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -219,3 +219,79 @@ BCM63138 -------- PLL and leaf clock compatible strings for BCM63138 are: "brcm,bcm63138-armpll" + +Stingray +----------- +PLL and leaf clock compatible strings for Stingray are: + "brcm,sr-genpll0" + "brcm,sr-genpll1" + "brcm,sr-genpll2" + "brcm,sr-genpll3" + "brcm,sr-genpll4" + "brcm,sr-genpll5" + "brcm,sr-genpll6" + + "brcm,sr-lcpll0" + "brcm,sr-lcpll1" + "brcm,sr-lcpll-pcie" + + +The following table defines the set of PLL/clock index and ID for Stingray. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-sr.h" + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + crmu_ref25m crystal N/A N/A + + genpll0 crystal 0 BCM_SR_GENPLL0 + clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK + clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK + clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK + clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK + clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK + clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK + + genpll1 crystal 0 BCM_SR_GENPLL1 + clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK + clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK + + genpll2 crystal 0 BCM_SR_GENPLL2 + clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK + clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK + clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK + clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK + clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH + + genpll3 crystal 0 BCM_SR_GENPLL3 + clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK + clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK + + genpll4 crystal 0 BCM_SR_GENPLL4 + ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK + clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK + noc_clk genpll4 3 BCM_SR_GENPLL4_NOC_CLK + clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK + clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK + + + genpll5 crystal 0 BCM_SR_GENPLL5 + fs4_hf_clk genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK + crypto_ae_clk genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK + raid_ae_clk genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK + + genpll6 crystal 0 BCM_SR_GENPLL6 + 48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK + + lcpll0 crystal 0 BCM_SR_LCPLL0 + clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK + clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK + clk_usb_ref lcpll0 3 BCM_SR_LCPLL0_USB_REF_CLK + sata_refpn lcpll0 3 BCM_SR_LCPLL0_SATA_REFPN_CLK + + lcpll1 crystal 0 BCM_SR_LCPLL1 + wan lcpll1 1 BCM_SR_LCPLL0_WAN_CLK + + lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE + pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt index e4d5feaebc29..ef3deb7b86ea 100644 --- a/Documentation/devicetree/bindings/clock/hi6220-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt @@ -11,6 +11,7 @@ Required Properties: - compatible: the compatible should be one of the following strings to indicate the clock controller functionality. + - "hisilicon,hi6220-acpu-sctrl" - "hisilicon,hi6220-aoctrl" - "hisilicon,hi6220-sysctrl" - "hisilicon,hi6220-mediactrl" diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt new file mode 100644 index 000000000000..7bc5e9ffb624 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt @@ -0,0 +1,31 @@ +Binding for Imagination Technologies MIPS Boston clock sources. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +The device node must be a child node of the syscon node corresponding to the +Boston system's platform registers. + +Required properties: +- compatible : Should be "img,boston-clock". +- #clock-cells : Should be set to 1. + Values available for clock consumers can be found in the header file: + <dt-bindings/clock/boston-clock.h> + +Example: + + system-controller@17ffd000 { + compatible = "img,boston-platform-regs", "syscon"; + reg = <0x17ffd000 0x1000>; + + clk_boston: clock { + compatible = "img,boston-clock"; + #clock-cells = <1>; + }; + }; + + uart0: uart@17ffe000 { + /* ... */ + clocks = <&clk_boston BOSTON_CLK_SYS>; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 5b4dfc1ea54f..551d03be9665 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -8,6 +8,7 @@ Required properties : "qcom,gcc-apq8084" "qcom,gcc-ipq8064" "qcom,gcc-ipq4019" + "qcom,gcc-ipq8074" "qcom,gcc-msm8660" "qcom,gcc-msm8916" "qcom,gcc-msm8960" diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 6ed469c66b32..6498e1fdbb33 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -57,6 +57,11 @@ Optional properties: - clocks: If clock-frequency is not specified, sysclk may be provided as an input clock. Either clock-frequency or clocks must be provided. + A second input clock, called "coreclk", may be provided if + core PLLs are based on a different input clock from the + platform PLL. +- clock-names: Required if a coreclk is present. Valid names are + "sysclk" and "coreclk". 2. Clock Provider @@ -73,6 +78,7 @@ second cell is the clock index for the specified type. 2 hwaccel index (n in CLKCGnHWACSR) 3 fman 0 for fm1, 1 for fm2 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 + 5 coreclk must be 0 3. Example diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index f4f944d81308..0cd894f987a3 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -15,6 +15,11 @@ Required Properties: - compatible: Must be one of: - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) + - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2) + - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W) + - "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H) + - "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N) + - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) @@ -24,9 +29,10 @@ Required Properties: - clocks: References to external parent clocks, one entry for each entry in clock-names - clock-names: List of external parent clock names. Valid names are: - - "extal" (r8a7743, r8a7745, r8a7795, r8a7796) + - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, + r8a7795, r8a7796) - "extalr" (r8a7795, r8a7796) - - "usb_extal" (r8a7743, r8a7745) + - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt new file mode 100644 index 000000000000..455a9a00a623 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt @@ -0,0 +1,56 @@ +* Rockchip RK3128 Clock and Reset Unit + +The RK3128 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3128-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "ext_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + +Example: Clock controller node: + + cru: cru@20000000 { + compatible = "rockchip,rk3128-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart2: serial@20068000 { + compatible = "rockchip,serial"; + reg = <0x20068000 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "sclk_uart", "pclk_uart"; + }; diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt new file mode 100644 index 000000000000..631d27cd89d6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -0,0 +1,31 @@ +Allwinner Display Engine 2.0 Clock Control Binding +-------------------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun8i-a83t-de2-clk" + - "allwinner,sun8i-v3s-de2-clk" + - "allwinner,sun50i-h5-de2-clk" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the display engine subsystem. + Three are needed: + - "mod": the display engine module clock + - "bus": the bus clock for the whole display engine subsystem +- clock-names: Must contain the clock names described just above +- resets: phandle to the reset control for the display engine subsystem. +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +de2_clocks: clock@1000000 { + compatible = "allwinner,sun8i-a83t-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index e9c5a1d9834a..df9fad58facd 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -6,6 +6,8 @@ Required properties : - "allwinner,sun6i-a31-ccu" - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" + - "allwinner,sun8i-a83t-ccu" + - "allwinner,sun8i-a83t-r-ccu" - "allwinner,sun8i-h3-ccu" - "allwinner,sun8i-h3-r-ccu" - "allwinner,sun8i-v3s-ccu" @@ -18,11 +20,13 @@ Required properties : - clocks: phandle to the oscillators feeding the CCU. Two are needed: - "hosc": the high frequency oscillator (usually at 24MHz) - "losc": the low frequency oscillator (usually at 32kHz) + On the A83T, this is the internal 16MHz oscillator divided by 512 - clock-names: Must contain the clock names described just above - #clock-cells : must contain 1 - #reset-cells : must contain 1 -For the PRCM CCUs on H3/A64, one more clock is needed: +For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: +- "pll-periph": the SoC's peripheral PLL from the main CCU - "iosc": the SoC's internal frequency oscillator Example for generic CCU: @@ -39,8 +43,8 @@ Example for PRCM CCU: r_ccu: clock@01f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; - clock-names = "hosc", "losc", "iosc"; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt new file mode 100644 index 000000000000..1e884c40ab50 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt @@ -0,0 +1,37 @@ +Texas Instruments TI-SCI Clocks +=============================== + +All clocks on Texas Instruments' SoCs that contain a System Controller, +are only controlled by this entity. Communication between a host processor +running an OS and the System Controller happens through a protocol known +as TI-SCI[1]. This clock implementation plugs into the common clock +framework and makes use of the TI-SCI protocol on clock API requests. + +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +Required properties: +------------------- +- compatible: Must be "ti,k2g-sci-clk" +- #clock-cells: Shall be 2. + In clock consumers, this cell represents the device ID and clock ID + exposed by the PM firmware. The assignments can be found in the header + files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and + <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> + is the SoC involved, for example 'k2g'. + +Examples: +-------- + +pmmc: pmmc { + compatible = "ti,k2g-sci"; + + k2g_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; +}; + +uart0: serial@2530c00 { + compatible = "ns16550a"; + clocks = <&k2g_clks 0x2c 0>; +}; diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt new file mode 100644 index 000000000000..48ee6991f2cc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt @@ -0,0 +1,56 @@ +Texas Instruments clkctrl clock binding + +Texas Instruments SoCs can have a clkctrl clock controller for each +interconnect target module. The clkctrl clock controller manages functional +and interface clocks for each module. Each clkctrl controller can also +gate one or more optional functional clocks for a module, and can have one +or more clock muxes. There is a clkctrl clock controller typically for each +interconnect target module on omap4 and later variants. + +The clock consumers can specify the index of the clkctrl clock using +the hardware offset from the clkctrl instance register space. The optional +clocks can be specified by clkctrl hardware offset and the index of the +optional clock. + +For more information, please see the Linux clock framework binding at +Documentation/devicetree/bindings/clock/clock-bindings.txt. + +Required properties : +- compatible : shall be "ti,clkctrl" +- #clock-cells : shall contain 2 with the first entry being the instance + offset from the clock domain base and the second being the + clock index + +Example: Clock controller node on omap 4430: + +&cm2 { + l4per: cm@1400 { + cm_l4per@0 { + cm_l4per_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x1b0>; + #clock-cells = <2>; + }; + }; + }; +}; + +Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h + +#define OMAP4_CLKCTRL_OFFSET 0x20 +#define OMAP4_CLKCTRL_INDEX(offset) ((offset) - OMAP4_CLKCTRL_OFFSET) +#define MODULEMODE_HWCTRL 1 +#define MODULEMODE_SWCTRL 2 + +#define OMAP4_GPTIMER10_CLKTRL OMAP4_CLKCTRL_INDEX(0x28) +#define OMAP4_GPTIMER11_CLKTRL OMAP4_CLKCTRL_INDEX(0x30) +#define OMAP4_GPTIMER2_CLKTRL OMAP4_CLKCTRL_INDEX(0x38) +... +#define OMAP4_GPIO2_CLKCTRL OMAP_CLKCTRL_INDEX(0x60) + +Example: Clock consumer node for GPIO2: + +&gpio2 { + clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0 + &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; +}; diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index 3193979b1d05..697714f8d75c 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -1,6 +1,6 @@ Common properties -The ePAPR specification does not define any properties related to hardware +The Devicetree Specification does not define any properties related to hardware byteswapping, but endianness issues show up frequently in porting Linux to different machine types. This document attempts to provide a consistent way of handling byteswapping across drivers. diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt index ba0e15ad5bd9..0c38e4b8fc51 100644 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -63,64 +63,64 @@ cpu0_opp_table: opp-table { * because they can not be enabled simultaneously on a * single SoC. */ - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0x06 0x0010>; opp-suspend; }; - opp100@275000000 { + opp100-275000000 { opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0x00FF>; opp-suspend; }; - opp100@300000000 { + opp100-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0020>; opp-suspend; }; - opp100@500000000 { + opp100-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0040>; }; - opp120@600000000 { + opp120-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x06 0x0080>; }; - oppturbo@720000000 { + oppturbo-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x01 0xFFFF>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x06 0x0100>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0x04 0x0200>; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 10a425f451fc..7aef0eae58d4 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -118,8 +118,8 @@ PROPERTIES Definition: A list of clock name strings in the same order as the clocks property. - Note: All other standard properties (see the ePAPR) are allowed - but are optional. + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. EXAMPLE diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt index baf8a3c1b469..73b0eb950bb3 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -55,8 +55,8 @@ PROPERTIES triplet that includes the child address, parent address, & length. - Note: All other standard properties (see the ePAPR) are allowed - but are optional. + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. EXAMPLE crypto@a0000 { diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt new file mode 100644 index 000000000000..f69773f4252b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -0,0 +1,29 @@ +Inside Secure SafeXcel cryptographic engine + +Required properties: +- compatible: Should be "inside-secure,safexcel-eip197". +- reg: Base physical address of the engine and length of memory mapped region. +- interrupts: Interrupt numbers for the rings and engine. +- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem". + +Optional properties: +- clocks: Reference to the crypto engine clock. +- dma-mask: The address mask limitation. Defaults to 64. + +Example: + + crypto: crypto@800000 { + compatible = "inside-secure,safexcel-eip197"; + reg = <0x800000 0x200000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", + "eip"; + clocks = <&cpm_syscon0 1 26>; + dma-mask = <0xff 0xffffffff>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt index c204725e5873..450da3661cad 100644 --- a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt @@ -6,8 +6,7 @@ Required properties: - interrupts: Should contain the five crypto engines interrupts in numeric order. These are global system and four descriptor rings. - clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "ethif", "cryp" +- clock-names: Must contain "cryp". - power-domains: Must contain a reference to the PM domain. @@ -20,8 +19,7 @@ Example: <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>, <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_CRYPTO>; - clock-names = "ethif","cryp"; + clocks = <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "cryp"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index ca02d3e4db91..284e2b14cfbe 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -5,7 +5,7 @@ with HDMI output and the HVS (Hardware Video Scaler) for compositing display planes. Required properties for VC4: -- compatible: Should be "brcm,bcm2835-vc4" +- compatible: Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4" Required properties for Pixel Valve: - compatible: Should be one of "brcm,bcm2835-pixelvalve0", @@ -54,11 +54,14 @@ Required properties for VEC: See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt Required properties for V3D: -- compatible: Should be "brcm,bcm2835-v3d" +- compatible: Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d" - reg: Physical base address and length of the V3D's registers - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +Optional properties for V3D: +- clocks: The clock the unit runs on + Required properties for DSI: - compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" - reg: Physical base address and length of the DSI block's registers diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 00ea670b8c4d..06668bca7ffc 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -78,6 +78,7 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt. remote endpoint phandle should be a reference to a valid mipi_dsi_host device node. - Video port 1 for the HDMI output +- Audio port 2 for the HDMI audio input Example @@ -112,5 +113,12 @@ Example remote-endpoint = <&hdmi_connector_in>; }; }; + + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index f6b3f36d422b..81b68580e199 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -25,7 +25,8 @@ Required properties: - clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. - ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0 corresponding to the video input of the controller and one port numbered 1 - corresponding to its HDMI output. Each port shall have a single endpoint. + corresponding to its HDMI output, and one port numbered 2 corresponding to + sound input of the controller. Each port shall have a single endpoint. Optional properties: @@ -59,6 +60,12 @@ Example: remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt index c9fd7b3807e7..549c538b38a5 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -8,12 +8,13 @@ Required properties: - compatible: value should be one of: "samsung,exynos5433-decon", "samsung,exynos5433-decon-tv"; - reg: physical base address and length of the DECON registers set. -- interrupts: should contain a list of all DECON IP block interrupts in the - order: VSYNC, LCD_SYSTEM. The interrupt specifier format - depends on the interrupt controller used. -- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys" - in the same order as they were listed in the interrupts - property. +- interrupt-names: should contain the interrupt names depending on mode of work: + video mode: "vsync", + command mode: "lcd_sys", + command mode with software trigger: "lcd_sys", "te". +- interrupts or interrupts-extended: list of interrupt specifiers corresponding + to names privided in interrupt-names, as described in + interrupt-controller/interrupts.txt - clocks: must include clock specifiers corresponding to entries in the clock-names property. - clock-names: list of clock names sorted in the same order as the clocks diff --git a/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt new file mode 100644 index 000000000000..59bb6cd8aa75 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,p320hvn03.txt @@ -0,0 +1,8 @@ +AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel + +Required properties: +- compatible: should be "auo,p320hvn03" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt index 81a75893d1b8..58fa3e48481d 100644 --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt @@ -57,11 +57,11 @@ can be specified. The parameters are defined as: +----------+-------------------------------------+----------+-------+ - | | ↑ | | | + | | ^ | | | | | |vback_porch | | | - | | ↓ | | | + | | v | | | +----------#######################################----------+-------+ - | # ↑ # | | + | # ^ # | | | # | # | | | hback # | # hfront | hsync | | porch # | hactive # porch | len | @@ -69,15 +69,15 @@ The parameters are defined as: | # | # | | | # |vactive # | | | # | # | | - | # ↓ # | | + | # v # | | +----------#######################################----------+-------+ - | | ↑ | | | + | | ^ | | | | | |vfront_porch | | | - | | ↓ | | | + | | v | | | +----------+-------------------------------------+----------+-------+ - | | ↑ | | | + | | ^ | | | | | |vsync_len | | | - | | ↓ | | | + | | v | | | +----------+-------------------------------------+----------+-------+ Example: diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt new file mode 100644 index 000000000000..5c70a8380e58 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt @@ -0,0 +1,23 @@ +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel + +Required properties: +- compatible: should be "innolux,p079zca" +- reg: DSI virtual channel of the peripheral +- power-supply: phandle of the regulator that provides the supply voltage +- enable-gpios: panel enable gpio + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + &mipi_dsi { + panel { + compatible = "innolux,p079zca"; + reg = <0>; + power-supply = <...>; + backlight = <&backlight>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt b/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt new file mode 100644 index 000000000000..71cbc49ecfab --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/nec,nl12880b20-05.txt @@ -0,0 +1,8 @@ +NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel + +Required properties: +- compatible: should be "nec,nl12880bc20-05" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt b/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt new file mode 100644 index 000000000000..1a639fd8778d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/nlt,nl192108ac18-02d.txt @@ -0,0 +1,8 @@ +NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel + +Required properties: +- compatible: should be "nlt,nl192108ac18-02d" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt index 18854f4c8376..4acea25c244b 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt @@ -1,7 +1,10 @@ Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel +Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel Required properties: - - compatible: "samsung,s6e3ha2" + - compatible: should be one of: + "samsung,s6e3ha2", + "samsung,s6e3hf2". - reg: the virtual channel number of a DSI peripheral - vdd3-supply: I/O voltage supply - vci-supply: voltage supply for analog circuits diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt new file mode 100644 index 000000000000..8e1476941c0f --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -0,0 +1,36 @@ +* STMicroelectronics STM32 lcd-tft display controller + +- ltdc: lcd-tft display controller host + must be a sub-node of st-display-subsystem + Required properties: + - compatible: "st,stm32-ltdc" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. + - clock-names: A list of clock names. For ltdc it should contain: + - "lcd" for the clock feeding the output pixel clock & IP clock. + - resets: reset to be used by the device (defined by use of RCC macro). + Required nodes: + - Video port for RGB output. + +Example: + +/ { + ... + soc { + ... + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x40016800 0x200>; + interrupts = <88>, <89>; + resets = <&rcc STM32F4_APB2_RESET(LTDC)>; + clocks = <&rcc 1 CLK_LCD>; + clock-names = "lcd"; + + port { + ltdc_out_rgb: endpoint { + }; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 57a8d0610062..b83e6018041d 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -4,6 +4,44 @@ Allwinner A10 Display Pipeline The Allwinner A10 Display pipeline is composed of several components that are going to be documented below: +For the input port of all components up to the TCON in the display +pipeline, if there are multiple components, the local endpoint IDs +must correspond to the index of the upstream block. For example, if +the remote endpoint is Frontend 1, then the local endpoint ID must +be 1. + +Conversely, for the output ports of the same group, the remote endpoint +ID must be the index of the local hardware block. If the local backend +is backend 1, then the remote endpoint ID must be 1. + +HDMI Encoder +------------ + +The HDMI Encoder supports the HDMI video and audio outputs, and does +CEC. It is one end of the pipeline. + +Required properties: + - compatible: value must be one of: + * allwinner,sun5i-a10s-hdmi + - reg: base address and size of memory-mapped region + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the HDMI encoder + * ahb: the HDMI interface clock + * mod: the HDMI module clock + * pll-0: the first video PLL + * pll-1: the second video PLL + - clock-names: the clock names mentioned above + - dmas: phandles to the DMA channels used by the HDMI encoder + * ddc-tx: The channel for DDC transmission + * ddc-rx: The channel for DDC reception + * audio-tx: The channel used for audio transmission + - dma-names: the channel names mentioned above + + - ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoint. The second should be the + output, usually to an HDMI connector. + TV Encoder ---------- @@ -31,6 +69,7 @@ Required properties: * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon * allwinner,sun8i-a33-tcon + * allwinner,sun8i-v3s-tcon - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. Three are needed: @@ -47,12 +86,15 @@ Required properties: Documentation/devicetree/bindings/media/video-interfaces.txt. The first port should be the input endpoint, the second one the output - The output should have two endpoints. The first is the block - connected to the TCON channel 0 (usually a panel or a bridge), the - second the block connected to the TCON channel 1 (usually the TV - encoder) + The output may have multiple endpoints. The TCON has two channels, + usually with the first channel being used for the panels interfaces + (RGB, LVDS, etc.), and the second being used for the outputs that + require another controller (TV Encoder, HDMI, etc.). The endpoints + will take an extra property, allwinner,tcon-channel, to specify the + channel the endpoint is associated to. If that property is not + present, the endpoint number will be used as the channel number. -On SoCs other than the A33, there is one more clock required: +On SoCs other than the A33 and V3s, there is one more clock required: - 'tcon-ch1': The clock driving the TCON channel 1 DRC @@ -138,6 +180,26 @@ Required properties: Documentation/devicetree/bindings/media/video-interfaces.txt. The first port should be the input endpoints, the second one the outputs +Display Engine 2.0 Mixer +------------------------ + +The DE2 mixer have many functionalities, currently only layer blending is +supported. + +Required properties: + - compatible: value must be one of: + * allwinner,sun8i-v3s-de2-mixer + - reg: base address and size of the memory-mapped region. + - clocks: phandles to the clocks feeding the mixer + * bus: the mixer interface clock + * mod: the mixer module clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset controllers driving the mixer + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoints, the second one the output + Display Engine Pipeline ----------------------- @@ -148,13 +210,15 @@ extra node. Required properties: - compatible: value must be one of: + * allwinner,sun5i-a10s-display-engine * allwinner,sun5i-a13-display-engine * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine * allwinner,sun8i-a33-display-engine + * allwinner,sun8i-v3s-display-engine - allwinner,pipelines: list of phandle to the display engine - frontends available. + frontends (DE 1.0) or mixers (DE 2.0) available. Example: @@ -173,6 +237,57 @@ panel: panel { }; }; +connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; +}; + +hdmi: hdmi@01c16000 { + compatible = "allwinner,sun5i-a10s-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <58>; + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "pll-0", "pll-1"; + dmas = <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_NORMAL 16>, + <&dma SUN4I_DMA_DEDICATED 24>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_hdmi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; +}; + tve0: tv-encoder@01c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt index 9c356284232b..38476475fd60 100644 --- a/Documentation/devicetree/bindings/display/zte,vou.txt +++ b/Documentation/devicetree/bindings/display/zte,vou.txt @@ -58,6 +58,18 @@ Required properties: integer cells. The first cell is the offset of SYSCTRL register used to control TV Encoder DAC power, and the second cell is the bit mask. +* VGA output device + +Required properties: + - compatible: should be "zte,zx296718-vga" + - reg: Physical base address and length of the VGA device IO region + - interrupts : VGA interrupt number to CPU + - clocks: Phandle with clock-specifier pointing to VGA I2C clock. + - clock-names: Must be "i2c_wclk". + - zte,vga-power-control: the phandle to SYSCTRL block followed by two + integer cells. The first cell is the offset of SYSCTRL register used + to control VGA DAC power, and the second cell is the bit mask. + Example: vou: vou@1440000 { @@ -81,6 +93,15 @@ vou: vou@1440000 { "main_wclk", "aux_wclk"; }; + vga: vga@8000 { + compatible = "zte,zx296718-vga"; + reg = <0x8000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VGA_I2C_WCLK>; + clock-names = "i2c_wclk"; + zte,vga-power-control = <&sysctrl 0x170 0xe0>; + }; + hdmi: hdmi@c000 { compatible = "zte,zx296718-hdmi"; reg = <0xc000 0x4000>; diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/Documentation/devicetree/bindings/dma/arm-pl08x.txt index 8a0097a029d3..0ba81f79266f 100644 --- a/Documentation/devicetree/bindings/dma/arm-pl08x.txt +++ b/Documentation/devicetree/bindings/dma/arm-pl08x.txt @@ -3,6 +3,11 @@ Required properties: - compatible: "arm,pl080", "arm,primecell"; "arm,pl081", "arm,primecell"; + "faraday,ftdmac020", "arm,primecell" +- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded + in the hardware and must be specified here as <0x0003b080>. This number + follows the PrimeCell standard numbering using the JEP106 vendor code 0x38 + for Faraday Technology. - reg: Address range of the PL08x registers - interrupt: The PL08x interrupt number - clocks: The clock running the IP core clock @@ -20,8 +25,8 @@ Optional properties: - dma-requests: contains the total number of DMA requests supported by the DMAC - memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32 64, 128 or 256 bytes are legal values -- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal - values +- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal + values, the Faraday FTDMAC020 can also accept 64 bits Clients Required properties: diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt new file mode 100644 index 000000000000..092913a28457 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt @@ -0,0 +1,29 @@ +* Broadcom SBA RAID engine + +Required properties: +- compatible: Should be one of the following + "brcm,iproc-sba" + "brcm,iproc-sba-v2" + The "brcm,iproc-sba" has support for only 6 PQ coefficients + The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients +- mboxes: List of phandle and mailbox channel specifiers + +Example: + +raid_mbox: mbox@67400000 { + ... + #mbox-cells = <3>; + ... +}; + +raid0 { + compatible = "brcm,iproc-sba-v2"; + mboxes = <&raid_mbox 0 0x1 0xffff>, + <&raid_mbox 1 0x1 0xffff>, + <&raid_mbox 2 0x1 0xffff>, + <&raid_mbox 3 0x1 0xffff>, + <&raid_mbox 4 0x1 0xffff>, + <&raid_mbox 5 0x1 0xffff>, + <&raid_mbox 6 0x1 0xffff>, + <&raid_mbox 7 0x1 0xffff>; +}; diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index 3316a9c2e638..79a204d50234 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -30,8 +30,9 @@ Required Properties: - interrupts: interrupt specifiers for the DMAC, one for each entry in interrupt-names. -- interrupt-names: one entry per channel, named "ch%u", where %u is the - channel number ranging from zero to the number of channels minus one. +- interrupt-names: one entry for the error interrupt, named "error", plus one + entry per channel, named "ch%u", where %u is the channel number ranging from + zero to the number of channels minus one. - clock-names: "fck" for the functional clock - clocks: a list of phandle + clock-specifier pairs, one for each entry diff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/shdma.txt index 2a3f3b8946b9..a91920a49433 100644 --- a/Documentation/devicetree/bindings/dma/shdma.txt +++ b/Documentation/devicetree/bindings/dma/shdma.txt @@ -1,6 +1,6 @@ * SHDMA Device Tree bindings -Sh-/r-mobile and r-car systems often have multiple identical DMA controller +Sh-/r-mobile and R-Car systems often have multiple identical DMA controller instances, capable of serving any of a common set of DMA slave devices, using the same configuration. To describe this topology we require all compatible SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt new file mode 100644 index 000000000000..a767259dedad --- /dev/null +++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt @@ -0,0 +1,24 @@ +Device-tree bindings for gpio-based FSI master driver +----------------------------------------------------- + +Required properties: + - compatible = "fsi-master-gpio"; + - clock-gpios = <gpio-descriptor>; : GPIO for FSI clock + - data-gpios = <gpio-descriptor>; : GPIO for FSI data signal + +Optional properties: + - enable-gpios = <gpio-descriptor>; : GPIO for enable signal + - trans-gpios = <gpio-descriptor>; : GPIO for voltage translator enable + - mux-gpios = <gpio-descriptor>; : GPIO for pin multiplexing with other + functions (eg, external FSI masters) + +Examples: + + fsi-master { + compatible = "fsi-master-gpio", "fsi-master"; + clock-gpios = <&gpio 0>; + data-gpios = <&gpio 1>; + enable-gpios = <&gpio 2>; + trans-gpios = <&gpio 3>; + mux-gpios = <&gpio 4>; + } diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt index 42c3bb2d53e8..38ca2201e8ae 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -2,17 +2,27 @@ Required properties: -- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio" - or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for - Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada - 370. "marvell,mv78200-gpio" should be used for the Discovery - MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP - SoCs (MV78230, MV78260, MV78460). +- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio", + "marvell,armadaxp-gpio" or "marvell,armada-8k-gpio". + + "marvell,orion-gpio" should be used for Orion, Kirkwood, Dove, + Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio" + should be used for the Discovery MV78200. + + "marvel,armadaxp-gpio" should be used for all Armada XP SoCs + (MV78230, MV78260, MV78460). + + "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K + SoCs (either from AP or CP), see + Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt + and + Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt + for specific details about the offset property. - reg: Address and length of the register set for the device. Only one entry is expected, except for the "marvell,armadaxp-gpio" variant for which two entries are expected: one for the general registers, - one for the per-cpu registers. + one for the per-cpu registers. Not used for marvell,armada-8k-gpio. - interrupts: The list of interrupts that are used for all the pins managed by this GPIO bank. There can be more than one interrupt @@ -41,9 +51,9 @@ Required properties: Optional properties: In order to use the GPIO lines in PWM mode, some additional optional -properties are required. Only Armada 370 and XP support these properties. +properties are required. -- compatible: Must contain "marvell,armada-370-xp-gpio" +- compatible: Must contain "marvell,armada-370-gpio" - reg: an additional register set is needed, for the GPIO Blink Counter on/off registers. @@ -71,7 +81,7 @@ Example: }; gpio1: gpio@18140 { - compatible = "marvell,armada-370-xp-gpio"; + compatible = "marvell,armada-370-gpio"; reg = <0x18140 0x40>, <0x181c8 0x08>; reg-names = "gpio", "pwm"; ngpios = <17>; diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index 84ede036f73d..802402f6cc5d 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -74,11 +74,14 @@ GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller. Optional standard bitfield specifiers for the last cell: - Bit 0: 0 means active high, 1 means active low -- Bit 1: 1 means single-ended wiring, see: +- Bit 1: 0 mean push-pull wiring, see: + https://en.wikipedia.org/wiki/Push-pull_output + 1 means single-ended wiring, see: https://en.wikipedia.org/wiki/Single-ended_triode - When used with active-low, this means open drain/collector, see: +- Bit 2: 0 means open-source, 1 means open drain, see: https://en.wikipedia.org/wiki/Open_collector - When used with active-high, this means open source/emitter +- Bit 3: 0 means the output should be maintained during sleep/low-power mode + 1 means the output state can be lost during sleep/low-power mode 1.1) GPIO specifier best practices ---------------------------------- @@ -282,8 +285,8 @@ Example 1: }; Here, a single GPIO controller has GPIOs 0..9 routed to pin controller -pinctrl1's pins 20..29, and GPIOs 10..19 routed to pin controller pinctrl2's -pins 50..59. +pinctrl1's pins 20..29, and GPIOs 10..29 routed to pin controller pinctrl2's +pins 50..69. Example 2: diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt index 85f8c0d084fa..29416f9c3220 100644 --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt @@ -5,9 +5,13 @@ Required properties: - reg: Should contain GPIO controller registers location and length - interrupts: Should be the port interrupt shared by all the pins. - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). + the second cell is used to specify optional parameters to declare if the GPIO + is active high or low. See gpio.txt. - gpio-controller: Marks the device node as a GPIO controller. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. The first cell is the pin number and the + second cell is used to specify irq type flags, see the two cell description + in interrupt-controller/interrupts.txt for details. optional properties: - #gpio-lines: Number of gpio if absent 32. @@ -21,5 +25,7 @@ Example: #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt new file mode 100644 index 000000000000..7988aeb725f4 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt @@ -0,0 +1,46 @@ +Ingenic jz47xx GPIO controller + +That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl +driver node. + +Required properties: +-------------------- + + - compatible: Must contain one of: + - "ingenic,jz4740-gpio" + - "ingenic,jz4770-gpio" + - "ingenic,jz4780-gpio" + - reg: The GPIO bank number. + - interrupt-controller: Marks the device node as an interrupt controller. + - interrupts: Interrupt specifier for the controllers interrupt. + - #interrupt-cells: Should be 2. Refer to + ../interrupt-controller/interrupts.txt for more details. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + - gpio-ranges: Range of pins managed by the GPIO controller. Refer to + 'gpio.txt' in this directory for more details. + +Example: +-------- + +&pinctrl { + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,jz4740-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <28>; + }; +}; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 7c1ab3b3254f..6826a371fb69 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -3,6 +3,7 @@ Required Properties: - compatible: should contain one of the following. + - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller. - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt new file mode 100644 index 000000000000..d3b6e1a4713a --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -0,0 +1,86 @@ +ARM Mali Midgard GPU +==================== + +Required properties: + +- compatible : + * Must contain one of the following: + + "arm,mali-t604" + + "arm,mali-t624" + + "arm,mali-t628" + + "arm,mali-t720" + + "arm,mali-t760" + + "arm,mali-t820" + + "arm,mali-t830" + + "arm,mali-t860" + + "arm,mali-t880" + * which must be preceded by one of the following vendor specifics: + + "amlogic,meson-gxm-mali" + + "rockchip,rk3288-mali" + +- reg : Physical base address of the device and length of the register area. + +- interrupts : Contains the three IRQ lines required by Mali Midgard devices. + +- interrupt-names : Contains the names of IRQ resources in the order they were + provided in the interrupts property. Must contain: "job", "mmu", "gpu". + + +Optional properties: + +- clocks : Phandle to clock for the Mali Midgard device. + +- mali-supply : Phandle to regulator for the Mali device. Refer to + Documentation/devicetree/bindings/regulator/regulator.txt for details. + +- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt + for details. + + +Example for a Mali-T760: + +gpu@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + reg = <0xffa30000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru ACLK_GPU>; + mali-supply = <&vdd_gpu>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&power RK3288_PD_GPU>; +}; + +gpu_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1250000>; + }; + opp@450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <1150000>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1125000>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1075000>; + }; + opp@266000000 { + opp-hz = /bits/ 64 <266000000>; + opp-microvolt = <1025000>; + }; + opp@160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <925000>; + }; + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <912500>; + }; +}; diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt index fcb1c6a4787b..0415e2c53ba0 100644 --- a/Documentation/devicetree/bindings/graph.txt +++ b/Documentation/devicetree/bindings/graph.txt @@ -34,7 +34,7 @@ remote device, an 'endpoint' child node must be provided for each link. If more than one port is present in a device node or there is more than one endpoint at a port, or a port node needs to be associated with a selected hardware interface, a common scheme using '#address-cells', '#size-cells' -and 'reg' properties is used number the nodes. +and 'reg' properties is used to number the nodes. device { ... @@ -89,9 +89,9 @@ Links between endpoints Each endpoint should contain a 'remote-endpoint' phandle property that points to the corresponding endpoint in the port of the remote device. In turn, the -remote endpoint should contain a 'remote-endpoint' property. If it has one, -it must not point to another than the local endpoint. Two endpoints with their -'remote-endpoint' phandles pointing at each other form a link between the +remote endpoint should contain a 'remote-endpoint' property. If it has one, it +must not point to anything other than the local endpoint. Two endpoints with +their 'remote-endpoint' phandles pointing at each other form a link between the containing ports. device-1 { @@ -110,13 +110,12 @@ device-2 { }; }; - Required properties ------------------- If there is more than one 'port' or more than one 'endpoint' node or 'reg' -property is present in port and/or endpoint nodes the following properties -are required in a relevant parent node: +property present in the port and/or endpoint nodes then the following +properties are required in a relevant parent node: - #address-cells : number of cells required to define port/endpoint identifier, should be 1. diff --git a/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt new file mode 100644 index 000000000000..581db9d941ba --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt @@ -0,0 +1,23 @@ +SPRD Hardware Spinlock Device Binding +------------------------------------- + +Required properties : +- compatible : should be "sprd,hwspinlock-r3p0". +- reg : the register address of hwspinlock. +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific + hwlock, so the number of cells should be <1> here. +- clock-names : Must contain "enable". +- clocks : Must contain a phandle entry for the clock in clock-names, see the + common clock bindings. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example of hwlock provider: + hwspinlock@40500000 { + compatible = "sprd,hwspinlock-r3p0"; + reg = <0 0x40500000 0 0x1000>; + #hwlock-cells = <1>; + clock-names = "enable"; + clocks = <&clk_aon_apb_gates0 22>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt new file mode 100644 index 000000000000..bd6480b19535 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -0,0 +1,48 @@ +Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs. + +Required Properties: +- #address-cells : should be 1 +- #size-cells : should be 0 +- reg : address offset and range of bus +- compatible : should be "aspeed,ast2400-i2c-bus" + or "aspeed,ast2500-i2c-bus" +- clocks : root clock of bus, should reference the APB + clock +- interrupts : interrupt number +- interrupt-parent : interrupt controller for bus, should reference a + aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic + interrupt controller + +Optional Properties: +- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not + specified +- multi-master : states that there is another master active on this bus. + +Example: + +i2c { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e78a000 0x1000>; + + i2c_ic: interrupt-controller@0 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; + }; + + i2c0: i2c-bus@40 { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + reg = <0x40 0x40>; + compatible = "aspeed,ast2400-i2c-bus"; + clocks = <&clk_apb>; + bus-frequency = <100000>; + interrupts = <0>; + interrupt-parent = <&i2c_ic>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index fee26dc3e858..fbb0a6d8b964 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -20,7 +20,7 @@ Optional properties : - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. This value which is by default 300ns is used to compute the tHIGH period. -Example : +Examples : i2c@f0000 { #address-cells = <1>; @@ -43,3 +43,17 @@ Example : i2c-sda-falling-time-ns = <300>; i2c-scl-falling-time-ns = <300>; }; + + i2c@1120000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <0>; + + eeprom@64 { + compatible = "linux,slave-24c02"; + reg = <0x40000064>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt index 0ce6fa3242f0..bd5a7befd951 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt @@ -4,11 +4,11 @@ The Mediatek's I2C controller is used to interface with I2C devices. Required properties: - compatible: value should be either of the following. - (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c. - (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c. - (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c. - (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c. - (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c. + "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701 + "mediatek,mt6577-i2c": for i2c compatible with mt6577. + "mediatek,mt6589-i2c": for i2c compatible with mt6589. + "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623. + "mediatek,mt8173-i2c": for i2c compatible with mt8173. - reg: physical base address of the controller and dma base, length of memory mapped region. - interrupts: interrupt number to the cpu. diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt new file mode 100644 index 000000000000..2907dab56298 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt @@ -0,0 +1,99 @@ +General Purpose I2C Bus Mux + +This binding describes an I2C bus multiplexer that uses a mux controller +from the mux subsystem to route the I2C signals. + + .-----. .-----. + | dev | | dev | + .------------. '-----' '-----' + | SoC | | | + | | .--------+--------' + | .------. | .------+ child bus A, on MUX value set to 0 + | | I2C |-|--| Mux | + | '------' | '--+---+ child bus B, on MUX value set to 1 + | .------. | | '----------+--------+--------. + | | MUX- | | | | | | + | | Ctrl |-|-----+ .-----. .-----. .-----. + | '------' | | dev | | dev | | dev | + '------------' '-----' '-----' '-----' + +Required properties: +- compatible: i2c-mux +- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side + port is connected to. +- mux-controls: The phandle of the mux controller to use for operating the + mux. +* Standard I2C mux properties. See i2c-mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number + is also the mux-controller state described in ../mux/mux-controller.txt + +Optional properties: +- mux-locked: If present, explicitly allow unrelated I2C transactions on the + parent I2C adapter at these times: + + during setup of the multiplexer + + between setup of the multiplexer and the child bus I2C transaction + + between the child bus I2C transaction and releasing of the multiplexer + + during releasing of the multiplexer + However, I2C transactions to devices behind all I2C multiplexers connected + to the same parent adapter that this multiplexer is connected to are blocked + for the full duration of the complete multiplexed I2C transaction (i.e. + including the times covered by the above list). + If mux-locked is not present, the multiplexer is assumed to be parent-locked. + This means that no unrelated I2C transactions are allowed on the parent I2C + adapter for the complete multiplexed I2C transaction. + The properties of mux-locked and parent-locked multiplexers are discussed + in more detail in Documentation/i2c/i2c-topology. + +For each i2c child node, an I2C child bus will be created. They will +be numbered based on their order in the device tree. + +Whenever an access is made to a device on a child bus, the value set +in the relevant node's reg property will be set as the state in the +mux controller. + +Example: + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + i2c-mux { + compatible = "i2c-mux"; + mux-locked; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7 1>; + reset-active-low; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt new file mode 100644 index 000000000000..f1f3876bb8e8 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt @@ -0,0 +1,29 @@ +* NXP PCA PCA9564/PCA9665 I2C controller + +The PCA9564/PCA9665 serves as an interface between most standard +parallel-bus microcontrollers/microprocessors and the serial I2C-bus +and allows the parallel bus system to communicate bi-directionally +with the I2C-bus. + +Required properties : + + - reg : Offset and length of the register set for the device + - compatible : one of "nxp,pca9564" or "nxp,pca9665" + +Optional properties + - interrupts : the interrupt number + - interrupt-parent : the phandle for the interrupt controller. + If an interrupt is not specified polling will be used. + - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line + is active low, it should be marked GPIO_ACTIVE_LOW. + - clock-frequency : I2C bus frequency. + +Example: + i2c0: i2c@80000 { + compatible = "nxp,pca9564"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80000 0x4>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + clock-frequency = <100000>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt new file mode 100644 index 000000000000..cb806d1ae4c9 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt @@ -0,0 +1,22 @@ +ZTE zx2967 I2C controller + +Required properties: + - compatible: must be "zte,zx296718-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + - clock-frequency: the desired I2C bus clock frequency. + +Examples: + + i2c@112000 { + compatible = "zte,zx296718-i2c"; + reg = <0x00112000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24m>; + #address-cells = <1> + #size-cells = <0>; + clock-frequency = <1600000>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt index 047189192aec..f413e82c8b83 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -2,6 +2,8 @@ Required properties: - compatible: depending on the SoC this should be one of: + - "amlogic,meson8-saradc" for Meson8 + - "amlogic,meson8b-saradc" for Meson8b - "amlogic,meson-gxbb-saradc" for GXBB - "amlogic,meson-gxl-saradc" for GXL - "amlogic,meson-gxm-saradc" for GXM diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt index f5b0adae6010..df5b9f2ad8d8 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt @@ -1,4 +1,4 @@ -* Renesas RCar GyroADC device driver +* Renesas R-Car GyroADC device driver The GyroADC block is a reduced SPI block with up to 8 chipselect lines, which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs @@ -16,8 +16,7 @@ Required properties: - clocks: References to all the clocks specified in the clock-names property as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. -- clock-names: Shall contain "fck" and "if". The "fck" is the GyroADC block - clock, the "if" is the interface clock. +- clock-names: Shall contain "fck". The "fck" is the GyroADC block clock. - power-domains: Must contain a reference to the PM domain, if available. - #address-cells: Should be <1> (setting for the subnodes) for all ADCs except for "fujitsu,mb88101a". Should be <0> (setting for @@ -75,8 +74,8 @@ Example: adc@e6e54000 { compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; reg = <0 0xe6e54000 0 64>; - clocks = <&mstp9_clks R8A7791_CLK_GYROADC>, <&clk_65m>; - clock-names = "fck", "if"; + clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; + clock-names = "fck"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; pinctrl-0 = <&adc_pins>; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index e35f9f1b3200..8310073f14e1 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -21,11 +21,19 @@ own configurable sequence and trigger: Contents of a stm32 adc root node: ----------------------------------- Required properties: -- compatible: Should be "st,stm32f4-adc-core". +- compatible: Should be one of: + "st,stm32f4-adc-core" + "st,stm32h7-adc-core" - reg: Offset and length of the ADC block register set. - interrupts: Must contain the interrupt for ADC block. -- clocks: Clock for the analog circuitry (common to all ADCs). -- clock-names: Must be "adc". +- clocks: Core can use up to two clocks, depending on part used: + - "adc" clock: for the analog circuitry, common to all ADCs. + It's required on stm32f4. + It's optional on stm32h7. + - "bus" clock: for registers access, common to all ADCs. + It's not present on stm32f4. + It's required on stm32h7. +- clock-names: Must be "adc" and/or "bus" depending on part used. - interrupt-controller: Identifies the controller node as interrupt-parent - vref-supply: Phandle to the vref input analog reference voltage. - #interrupt-cells = <1>; @@ -42,14 +50,18 @@ An ADC block node should contain at least one subnode, representing an ADC instance available on the machine. Required properties: -- compatible: Should be "st,stm32f4-adc". +- compatible: Should be one of: + "st,stm32f4-adc" + "st,stm32h7-adc" - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). -- clocks: Input clock private to this ADC instance. +- clocks: Input clock private to this ADC instance. It's required only on + stm32f4, that has per instance clock input for registers access. - interrupt-parent: Phandle to the parent interrupt controller. - interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or 2 for adc@200). - st,adc-channels: List of single-ended channels muxed for this ADC. - It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15). + It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered + from 0 to 15 or 19 (resp. for in0..in15 or in0..in19). - #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in Documentation/devicetree/bindings/iio/iio-bindings.txt @@ -58,7 +70,9 @@ Optional properties: See ../../dma/dma.txt for details. - dma-names: Must be "rx" when dmas property is being used. - assigned-resolution-bits: Resolution (bits) to use for conversions. Must - match device available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4). + match device available resolutions: + * can be 6, 8, 10 or 12 on stm32f4 + * can be 8, 10, 12, 14 or 16 on stm32h7 Default is maximum resolution if unset. Example: diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt new file mode 100644 index 000000000000..4259e50620bc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc084s021.txt @@ -0,0 +1,19 @@ +* Texas Instruments' ADC084S021 + +Required properties: + - compatible : Must be "ti,adc084s021" + - reg : SPI chip select number for the device + - vref-supply : The regulator supply for ADC reference voltage + - spi-cpol : Per spi-bus bindings + - spi-cpha : Per spi-bus bindings + - spi-max-frequency : Per spi-bus bindings + +Example: +adc@0 { + compatible = "ti,adc084s021"; + reg = <0>; + vref-supply = <&adc_vref>; + spi-cpol; + spi-cpha; + spi-max-frequency = <16000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt new file mode 100644 index 000000000000..bbbbb4a9f58f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt @@ -0,0 +1,18 @@ +* Texas Instruments' ADC108S102 and ADC128S102 ADC chip + +Required properties: + - compatible: Should be "ti,adc108s102" + - reg: spi chip select number for the device + - vref-supply: The regulator supply for ADC reference voltage + +Recommended properties: + - spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "ti,adc108s102"; + reg = <0>; + vref-supply = <&vdd_supply>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 8305fb05ffda..6f28ff55f3ec 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -13,7 +13,8 @@ Optional properties: "data ready" (valid values: 1 or 2). - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with - flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. Refer to interrupt-controller/interrupts.txt for generic interrupt client node bindings. diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt new file mode 100644 index 000000000000..c82794002595 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt @@ -0,0 +1,39 @@ +I/O channel multiplexer bindings + +If a multiplexer is used to select which hardware signal is fed to +e.g. an ADC channel, these bindings describe that situation. + +Required properties: +- compatible : "io-channel-mux" +- io-channels : Channel node of the parent channel that has multiplexed + input. +- io-channel-names : Should be "parent". +- #address-cells = <1>; +- #size-cells = <0>; +- mux-controls : Mux controller node to use for operating the mux +- channels : List of strings, labeling the mux controller states. + +For each non-empty string in the channels property, an io-channel will +be created. The number of this io-channel is the same as the index into +the list of strings in the channels property, and also matches the mux +controller state. The mux controller state is described in +../mux/mux-controller.txt + +Example: + mux: mux-controller { + compatible = "mux-gpio"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + + channels = "sync", "in", "system-regulator"; + }; diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index ae23dd8da736..38d74314b7ab 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -3,6 +3,7 @@ Austrian Microsystems AS3935 Franklin lightning sensor device driver Required properties: - compatible: must be "ams,as3935" - reg: SPI chip select number for the device + - spi-max-frequency: specifies maximum SPI clock frequency - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI slave node bindings. - interrupt-parent : should be the phandle for the interrupt controller @@ -21,6 +22,7 @@ Example: as3935@0 { compatible = "ams,as3935"; reg = <0>; + spi-max-frequency = <400000>; spi-cpha; interrupt-parent = <&gpio1>; interrupts = <16 1>; diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt new file mode 100644 index 000000000000..10dec1c57abf --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt @@ -0,0 +1,21 @@ +* D-Link DIR-685 Touchkeys + +This is a I2C one-off touchkey controller based on the Cypress Semiconductor +CY8C214 MCU with some firmware in its internal 8KB flash. The circuit +board inside the router is named E119921. + +The touchkey device node should be placed inside an I2C bus node. + +Required properties: +- compatible: must be "dlink,dir685-touchkeys" +- reg: the I2C address of the touchkeys +- interrupts: reference to the interrupt number + +Example: + +touchkeys@26 { + compatible = "dlink,dir685-touchkeys"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt new file mode 100644 index 000000000000..9683595cd0f5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt @@ -0,0 +1,43 @@ +* ST-Microelectronics FingerTip touchscreen controller + +The ST-Microelectronics FingerTip device provides a basic touchscreen +functionality. Along with it the user can enable the touchkey which can work as +a basic HOME and BACK key for phones. + +The driver supports also hovering as an absolute single touch event with x, y, z +coordinates. + +Required properties: +- compatible : must be "st,stmfts" +- reg : I2C slave address, (e.g. 0x49) +- interrupt-parent : the phandle to the interrupt controller which provides + the interrupt +- interrupts : interrupt specification +- avdd-supply : analogic power supply +- vdd-supply : power supply +- touchscreen-size-x : see touchscreen.txt +- touchscreen-size-y : see touchscreen.txt + +Optional properties: +- touch-key-connected : specifies whether the touchkey feature is connected +- ledvdd-supply : power supply to the touch key leds + +Example: + +i2c@00000000 { + + /* ... */ + + touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_NONE>; + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + ledvdd-supply = <&ldo33_reg>; + }; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt index 81cd3692405e..4ae553eb333d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt @@ -3,8 +3,11 @@ Allwinner Sunxi NMI Controller Required properties: -- compatible : should be "allwinner,sun7i-a20-sc-nmi" or - "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi" +- compatible : should be one of the following: + - "allwinner,sun7i-a20-sc-nmi" + - "allwinner,sun6i-a31-sc-nmi" (deprecated) + - "allwinner,sun6i-a31-r-intc" + - "allwinner,sun9i-a80-nmi" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt new file mode 100644 index 000000000000..033cc82e5684 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt @@ -0,0 +1,25 @@ +Device tree configuration for the I2C Interrupt Controller on the AST24XX and +AST25XX SoCs. + +Required Properties: +- #address-cells : should be 1 +- #size-cells : should be 1 +- #interrupt-cells : should be 1 +- compatible : should be "aspeed,ast2400-i2c-ic" + or "aspeed,ast2500-i2c-ic" +- reg : address start and range of controller +- interrupts : interrupt number +- interrupt-controller : denotes that the controller receives and fires + new interrupts for child busses + +Example: + +i2c_ic: interrupt-controller@0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt index 6c6e85324b9d..e3fea0758d25 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt @@ -1,12 +1,13 @@ Aspeed Vectored Interrupt Controller -These bindings are for the Aspeed AST2400 interrupt controller register layout. -The SoC has an legacy register layout, but this driver does not support that -mode of operation. +These bindings are for the Aspeed interrupt controller. The AST2400 and +AST2500 SoC families include a legacy register layout before a re-designed +layout, but the bindings do not prescribe the use of one or the other. Required properties: -- compatible : should be "aspeed,ast2400-vic". +- compatible : "aspeed,ast2400-vic" + "aspeed,ast2500-vic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt new file mode 100644 index 000000000000..64a00ceb7da4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt @@ -0,0 +1,27 @@ +Marvell GICP Controller +----------------------- + +GICP is a Marvell extension of the GIC that allows to trigger GIC SPI +interrupts by doing a memory transaction. It is used by the ICU +located in the Marvell CP110 to turn wired interrupts inside the CP +into GIC SPI interrupts. + +Required properties: + +- compatible: Must be "marvell,ap806-gicp" + +- reg: Must be the address and size of the GICP SPI registers + +- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available + for this GICP + +- msi-controller: indicates that this is an MSI controller + +Example: + +gicp_spi: gicp-spi@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt new file mode 100644 index 000000000000..aa8bf2ec8905 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt @@ -0,0 +1,51 @@ +Marvell ICU Interrupt Controller +-------------------------------- + +The Marvell ICU (Interrupt Consolidation Unit) controller is +responsible for collecting all wired-interrupt sources in the CP and +communicating them to the GIC in the AP, the unit translates interrupt +requests on input wires to MSG memory mapped transactions to the GIC. + +Required properties: + +- compatible: Should be "marvell,cp110-icu" + +- reg: Should contain ICU registers location and length. + +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 3. + + The 1st cell is the group type of the ICU interrupt. Possible group + types are: + + ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure + ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure + ICU_GRP_SEI (0x4) : System error interrupt + ICU_GRP_REI (0x5) : RAM error interrupt + + The 2nd cell is the index of the interrupt in the ICU unit. + + The 3rd cell is the type of the interrupt. See arm,gic.txt for + details. + +- interrupt-controller: Identifies the node as an interrupt + controller. + +- msi-parent: Should point to the GICP controller, the GIC extension + that allows to trigger interrupts using MSG memory mapped + transactions. + +Example: + +icu: interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x10>; + #interrupt-cells = <3>; + interrupt-controller; + msi-parent = <&gicp>; +}; + +usb3h0: usb3@500000 { + interrupt-parent = <&icu>; + interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index a89c03bb1a81..11cc87aeb276 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -1,21 +1,23 @@ -+Mediatek 65xx/67xx/81xx sysirq ++Mediatek MT65xx/MT67xx/MT81xx sysirq Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI interrupt. Required properties: -- compatible: should be one of: - "mediatek,mt8173-sysirq" - "mediatek,mt8135-sysirq" - "mediatek,mt8127-sysirq" - "mediatek,mt6795-sysirq" - "mediatek,mt6755-sysirq" - "mediatek,mt6592-sysirq" - "mediatek,mt6589-sysirq" - "mediatek,mt6582-sysirq" - "mediatek,mt6580-sysirq" - "mediatek,mt6577-sysirq" - "mediatek,mt2701-sysirq" +- compatible: should be + "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173 + "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 + "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 + "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 + "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 + "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 + "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755 + "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592 + "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589 + "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582 + "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580 + "mediatek,mt6577-sysirq": for MT6577 + "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701 - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. - interrupt-parent: phandle of irq parent for sysirq. The parent must diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt index 909a902dff85..ccbbfdc53c72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt @@ -92,7 +92,6 @@ Example 2: * References -[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform - Requirements (ePAPR), Version 1.0, July 2008. - (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf) +[1] Devicetree Specification + (https://www.devicetree.org/specifications/) diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt index be57550e14e4..c9abbf3e4f68 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt @@ -26,6 +26,12 @@ the PCIe specification. * "priq" - PRI Queue not empty * "cmdq-sync" - CMD_SYNC complete * "gerror" - Global Error activated + * "combined" - The combined interrupt is optional, + and should only be provided if the + hardware supports just a single, + combined interrupt line. + If provided, then the combined interrupt + will be used in preference to any others. - #iommu-cells : See the generic IOMMU binding described in devicetree/bindings/pci/pci-iommu.txt @@ -49,6 +55,12 @@ the PCIe specification. - hisilicon,broken-prefetch-cmd : Avoid sending CMD_PREFETCH_* commands to the SMMU. +- cavium,cn9900-broken-page1-regspace + : Replaces all page 1 offsets used for EVTQ_PROD/CONS, + PRIQ_PROD/CONS register access with page 0 offsets. + Set for Cavium ThunderX2 silicon that doesn't support + SMMU page1 register space. + ** Example smmu@2b400000 { diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt index 24b656014089..1d4afe9644b6 100644 --- a/Documentation/devicetree/bindings/leds/common.txt +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -1,4 +1,4 @@ -Common leds properties. +* Common leds properties. LED and flash LED devices provide the same basic functionality as current regulators, but extended with LED and flash LED specific features like @@ -49,6 +49,22 @@ Optional properties for child nodes: - panic-indicator : This property specifies that the LED should be used, if at all possible, as a panic indicator. +- trigger-sources : List of devices which should be used as a source triggering + this LED activity. Some LEDs can be related to a specific + device and should somehow indicate its state. E.g. USB 2.0 + LED may react to device(s) in a USB 2.0 port(s). + Another common example is switch or router with multiple + Ethernet ports each of them having its own LED assigned + (assuming they are not hardwired). In such cases this + property should contain phandle(s) of related source + device(s). + In many cases LED can be related to more than one device + (e.g. one USB LED vs. multiple USB ports). Each source + should be represented by a node in the device tree and be + referenced by a phandle and a set of phandle arguments. A + length of arguments should be specified by the + #trigger-source-cells property in the source node. + Required properties for flash LED child nodes: - flash-max-microamp : Maximum flash LED supply current in microamperes. - flash-max-timeout-us : Maximum timeout in microseconds after which the flash @@ -59,7 +75,17 @@ property can be omitted. For controllers that have no configurable timeout the flash-max-timeout-us property can be omitted. -Examples: +* Trigger source providers + +Each trigger source should be represented by a device tree node. It may be e.g. +a USB port or an Ethernet device. + +Required properties for trigger source: +- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for + nodes of simple trigger sources (e.g. a specific USB + port). + +* Examples gpio-leds { compatible = "gpio-leds"; @@ -69,6 +95,11 @@ gpio-leds { linux,default-trigger = "heartbeat"; gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; + + usb { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + }; }; max77693-led { diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt index dfbdb123a9bf..4eee41482041 100644 --- a/Documentation/devicetree/bindings/leds/pca963x.txt +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -10,6 +10,7 @@ Optional properties: - nxp,period-scale : In some configurations, the chip blinks faster than expected. This parameter provides a scaling ratio (fixed point, decimal divided by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x. +- nxp,inverted-out: invert the polarity of the generated PWM Each led is represented as a sub-node of the nxp,pca963x device. diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt new file mode 100644 index 000000000000..fb961c310f44 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt @@ -0,0 +1,46 @@ +Binding for the Qualcomm APCS global block +========================================== + +This binding describes the APCS "global" block found in various Qualcomm +platforms. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,msm8916-apcs-kpss-global", + "qcom,msm8996-apcs-hmss-global" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: must specify the base address and size of the global block + +- #mbox-cells: + Usage: required + Value type: <u32> + Definition: as described in mailbox.txt, must be 1 + + += EXAMPLE +The following example describes the APCS HMSS found in MSM8996 and part of the +GLINK RPM referencing the "rpm_hlos" doorbell therein. + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x9820000 0x1000>; + + #mbox-cells = <1>; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + mboxes = <&apcs_glb 0>; + mbox-names = "rpm_hlos"; + }; + diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 8f2e2822238d..b37bdde5cfda 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -30,7 +30,8 @@ Required properties: - gpio-controller : Indicates this device is a GPIO controller. - #gpio-cells : Must be 2. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). + second cell is used to specify optional parameters, see ../gpio/gpio.txt + for details. - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device, as covered in Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt index 0d5a4466a494..22da96d344a7 100644 --- a/Documentation/devicetree/bindings/mfd/hi6421.txt +++ b/Documentation/devicetree/bindings/mfd/hi6421.txt @@ -1,7 +1,9 @@ * HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd. Required parent device properties: -- compatible : contains "hisilicon,hi6421-pmic"; +- compatible : One of the following chip-specific strings: + "hisilicon,hi6421-pmic"; + "hisilicon,hi6421v530-pmic"; - reg : register range space of hi6421; Supported Hi6421 sub-devices include: diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt new file mode 100644 index 000000000000..a48df7c08ab0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lp87565.txt @@ -0,0 +1,43 @@ +TI LP87565 PMIC MFD driver + +Required properties: + - compatible: "ti,lp87565", "ti,lp87565-q1" + - reg: I2C slave address. + - gpio-controller: Marks the device node as a GPIO Controller. + - #gpio-cells: Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + - xxx-in-supply: Phandle to parent supply node of each regulator + populated under regulators node. xxx should match + the supply_name populated in driver. +Example: + +lp87565_pmic: pmic@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + + buck10-in-supply = <&vsys_3v3>; + buck23-in-supply = <&vsys_3v3>; + + regulators: regulators { + buck10_reg: buck10 { + /* VDD_MPU */ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU */ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt index bbd083f5600a..1db6e0057a63 100644 --- a/Documentation/devicetree/bindings/mfd/stm32-timers.txt +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt @@ -31,7 +31,7 @@ Example: compatible = "st,stm32-timers"; reg = <0x40010000 0x400>; clocks = <&rcc 0 160>; - clock-names = "clk_int"; + clock-names = "int"; pwm { compatible = "st,stm32-pwm"; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 38833e63a59f..8af1202b381d 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -61,6 +61,10 @@ Optional properties: There should be 9 entries here, one for each gpio. - ti,system-power-controller: Telling whether or not this pmic is controlling the system power. +- ti,sleep-enable: Enable SLEEP state. +- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state. +- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state. +- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state. Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep diff --git a/Documentation/devicetree/bindings/misc/allwinner,syscon.txt b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt new file mode 100644 index 000000000000..31494a24fe69 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt @@ -0,0 +1,20 @@ +* Allwinner sun8i system controller + +This file describes the bindings for the system controller present in +Allwinner SoC H3, A83T and A64. +The principal function of this syscon is to control EMAC PHY choice and +config. + +Required properties for the system controller: +- reg: address and length of the register for the device. +- compatible: should be "syscon" and one of the following string: + "allwinner,sun8i-h3-system-controller" + "allwinner,sun8i-v3s-system-controller" + "allwinner,sun50i-a64-system-controller" + "allwinner,sun8i-a83t-system-controller" + +Example: +syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", "syscon"; + reg = <0x01c00000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index dedfb02c744a..a2cf5e1c87d8 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -7,6 +7,20 @@ This file documents differences between the core properties described by mmc.txt and the properties used by the sdhci-esdhc driver. Required properties: + - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc". + Possible compatibles for PowerPC: + "fsl,mpc8536-esdhc" + "fsl,mpc8378-esdhc" + "fsl,p2020-esdhc" + "fsl,p4080-esdhc" + "fsl,t1040-esdhc" + "fsl,t4240-esdhc" + Possible compatibles for ARM: + "fsl,ls1012a-esdhc" + "fsl,ls1088a-esdhc" + "fsl,ls1043a-esdhc" + "fsl,ls1046a-esdhc" + "fsl,ls2080a-esdhc" - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index df370585cbcc..8af1afcb86dc 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -12,6 +12,7 @@ extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: * compatible: should be one of the following. + - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions. - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions. diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index 520d61dad6dd..49ed3ad2524a 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -15,6 +15,7 @@ Required Properties: - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 + - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 @@ -31,6 +32,10 @@ Optional Properties: probing, low speeds or in case where all phases work at tuning time. If not specified 0 deg will be used. +* rockchip,desired-num-phases: The desired number of times that the host + execute tuning when needed. If not specified, the host will do tuning + for 360 times, namely tuning for each degree. + Example: rkdwmmc0@12200000 { diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 74166a0d460d..0e026c151c1c 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -18,7 +18,7 @@ Required properties: Optional properties: ti,dual-volt: boolean, supports dual voltage cards <supply-name>-supply: phandle to the regulator device tree node -"supply-name" examples are "vmmc", "vmmc_aux" etc +"supply-name" examples are "vmmc", "vmmc_aux"(deprecated)/"vqmmc" etc ti,non-removable: non-removable slot (like eMMC) ti,needs-special-reset: Requires a special softreset sequence ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index f6bee57e453a..9bb66e476672 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -59,8 +59,22 @@ Required properties: - reg: should contain 2 register ranges. The first one is pointing to the PMECC block, and the second one to the PMECC_ERRLOC block. +* SAMA5 NFC I/O bindings: + +SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page +operations. This interface to this logic is placed in a separate I/O range and +should thus have its own DT node. + +- compatible: should be "atmel,sama5d3-nfc-io", "syscon". +- reg: should contain the I/O range used to interact with the NFC logic. + Example: + nfc_io: nfc-io@70000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0x70000000 0x8000000>; + }; + pmecc: ecc-engine@ffffc070 { compatible = "atmel,at91sam9g45-pmecc"; reg = <0xffffc070 0x490>, diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index e593bbeb2115..504291d2e5c2 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -3,10 +3,23 @@ Required properties: - compatible : should be one of the following: "altr,socfpga-denali-nand" - for Altera SOCFPGA + "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) + "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. +Optional properties: + - nand-ecc-step-size: see nand.txt for details. If present, the value must be + 512 for "altr,socfpga-denali-nand" + 1024 for "socionext,uniphier-denali-nand-v5a" + 1024 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-strength: see nand.txt for details. Valid values are: + 8, 15 for "altr,socfpga-denali-nand" + 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" + 8, 16 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-maximize: see nand.txt for details + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt index 8c1528c421d4..59ddc61c1076 100644 --- a/Documentation/devicetree/bindings/mtd/elm.txt +++ b/Documentation/devicetree/bindings/mtd/elm.txt @@ -1,7 +1,7 @@ Error location module Required properties: -- compatible: Must be "ti,am33xx-elm" +- compatible: Must be "ti,am3352-elm" - reg: physical base address and size of the registers map. - interrupts: Interrupt number for the elm. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 174f68c26c1b..dd559045593d 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "nand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For NAND specific properties such as ECC modes or bus width, please refer to Documentation/devicetree/bindings/mtd/nand.txt diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 4828c17bb784..131d3a74d0bd 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -5,7 +5,7 @@ child nodes of the GPMC controller with a name of "nor". All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: - bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and @@ -28,7 +28,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/bus/ti-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Optional properties for partition table parsing: - #address-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index 5d8fa527c496..b6e8bfd024f4 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "onenand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index d02acaff3c35..b289ef3c1b7e 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -4,7 +4,12 @@ The GPMI nand controller provides an interface to control the NAND flash chips. Required properties: - - compatible : should be "fsl,<chip>-gpmi-nand" + - compatible : should be "fsl,<chip>-gpmi-nand", chip can be: + * imx23 + * imx28 + * imx6q + * imx6sx + * imx7d - reg : should contain registers location and length for gpmi and bch. - reg-names: Should contain the reg names "gpmi-nand" and "bch" - interrupts : BCH interrupt number. @@ -13,6 +18,13 @@ Required properties: and GPMI DMA channel ID. Refer to dma.txt and fsl-mxs-dma.txt for details. - dma-names: Must be "rx-tx". + - clocks : clocks phandle and clock specifier corresponding to each clock + specified in clock-names. + - clock-names : The "gpmi_io" clock is always required. Which clocks are + exactly required depends on chip: + * imx23/imx28 : "gpmi_io" + * imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch" + * imx7d : "gpmi_io", "gpmi_bch_apb" Optional properties: - nand-on-flash-bbt: boolean to enable on flash bbt option if not diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt new file mode 100644 index 000000000000..7328eb92a03c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt @@ -0,0 +1,18 @@ +* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM + +Required properties: +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. +- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024" +- reg : Chip-Select number +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at + +Example: + + spi-sram@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "microchip,mchp23k256"; + reg = <0>; + spi-max-frequency = <20000000>; + }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index 069c192ed5c2..dbf9e054c11c 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -12,7 +12,8 @@ tree nodes. The first part of NFC is NAND Controller Interface (NFI) HW. Required NFI properties: -- compatible: Should be "mediatek,mtxxxx-nfc". +- compatible: Should be one of "mediatek,mt2701-nfc", + "mediatek,mt2712-nfc". - reg: Base physical address and size of NFI. - interrupts: Interrupts of NFI. - clocks: NFI required clocks. @@ -141,7 +142,7 @@ Example: ============== Required BCH properties: -- compatible: Should be "mediatek,mtxxxx-ecc". +- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc". - reg: Base physical address and size of ECC. - interrupts: Interrupts of ECC. - clocks: ECC required clocks. diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index b05601600083..133f3813719c 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -21,7 +21,7 @@ Optional NAND chip properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", - "hw_oob_first". + "hw_oob_first", "on-die". Deprecated values: "soft_bch": use "soft" and nand-ecc-algo instead - nand-ecc-algo: string, algorithm of NAND ECC. diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index 81a224da63be..36f3b769a626 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -1,29 +1,49 @@ -Representing flash partitions in devicetree +Flash partitions in device tree +=============================== -Partitions can be represented by sub-nodes of an mtd device. This can be used +Flash devices can be partitioned into one or more functional ranges (e.g. "boot +code", "nvram", "kernel"). + +Different devices may be partitioned in a different ways. Some may use a fixed +flash layout set at production time. Some may use on-flash table that describes +the geometry and naming/purpose of each functional region. It is also possible +to see these methods mixed. + +To assist system software in locating partitions, we allow describing which +method is used for a given flash device. To describe the method there should be +a subnode of the flash device that is named 'partitions'. It must have a +'compatible' property, which is used to identify the method to use. + +We currently only document a binding for fixed layouts. + + +Fixed Partitions +================ + +Partitions can be represented by sub-nodes of a flash device. This can be used on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -The partition table should be a subnode of the mtd node and should be named +The partition table should be a subnode of the flash node and should be named 'partitions'. This node should have the following property: - compatible : (required) must be "fixed-partitions" Partitions are then defined in subnodes of the partitions node. -For backwards compatibility partitions as direct subnodes of the mtd device are +For backwards compatibility partitions as direct subnodes of the flash device are supported. This use is discouraged. NOTE: also for backwards compatibility, direct subnodes that have a compatible string are not considered partitions, as they may be used for other bindings. #address-cells & #size-cells must both be present in the partitions subnode of the -mtd device. There are two valid values for both: +flash device. There are two valid values for both: <1>: for partitions that require a single 32-bit cell to represent their size/address (aka the value is below 4 GiB) <2>: for partitions that require two 32-bit cells to represent their size/address (aka the value is 4 GiB or greater). Required properties: -- reg : The partition's offset and size within the mtd bank. +- reg : The partition's offset and size within the flash Optional properties: - label : The label / name for this partition. If omitted, the label is taken diff --git a/Documentation/devicetree/bindings/mux/adi,adg792a.txt b/Documentation/devicetree/bindings/mux/adi,adg792a.txt new file mode 100644 index 000000000000..96b787a69f50 --- /dev/null +++ b/Documentation/devicetree/bindings/mux/adi,adg792a.txt @@ -0,0 +1,75 @@ +Bindings for Analog Devices ADG792A/G Triple 4:1 Multiplexers + +Required properties: +- compatible : "adi,adg792a" or "adi,adg792g" +- #mux-control-cells : <0> if parallel (the three muxes are bound together + with a single mux controller controlling all three muxes), or <1> if + not (one mux controller for each mux). +* Standard mux-controller bindings as described in mux-controller.txt + +Optional properties for ADG792G: +- gpio-controller : if present, #gpio-cells below is required. +- #gpio-cells : should be <2> + - First cell is the GPO line number, i.e. 0 or 1 + - Second cell is used to specify active high (0) + or active low (1) + +Optional properties: +- idle-state : if present, array of states that the mux controllers will have + when idle. The special state MUX_IDLE_AS_IS is the default and + MUX_IDLE_DISCONNECT is also supported. + +States 0 through 3 correspond to signals A through D in the datasheet. + +Example: + + /* + * Three independent mux controllers (of which one is used). + * Mux 0 is disconnected when idle, mux 1 idles in the previously + * selected state and mux 2 idles with signal B. + */ + &i2c0 { + mux: mux-controller@50 { + compatible = "adi,adg792a"; + reg = <0x50>; + #mux-control-cells = <1>; + + idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 1>; + }; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux 2>; + + channels = "sync-1", "", "out"; + }; + + + /* + * Three parallel muxes with one mux controller, useful e.g. if + * the adc is differential, thus needing two signals to be muxed + * simultaneously for correct operation. + */ + &i2c0 { + pmux: mux-controller@50 { + compatible = "adi,adg792a"; + reg = <0x50>; + #mux-control-cells = <0>; + + idle-state = <1>; + }; + }; + + diff-adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&pmux>; + + channels = "sync-1", "", "out"; + }; diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.txt b/Documentation/devicetree/bindings/mux/gpio-mux.txt new file mode 100644 index 000000000000..b8f746344d80 --- /dev/null +++ b/Documentation/devicetree/bindings/mux/gpio-mux.txt @@ -0,0 +1,69 @@ +GPIO-based multiplexer controller bindings + +Define what GPIO pins are used to control a multiplexer. Or several +multiplexers, if the same pins control more than one multiplexer. + +Required properties: +- compatible : "gpio-mux" +- mux-gpios : list of gpios used to control the multiplexer, least + significant bit first. +- #mux-control-cells : <0> +* Standard mux-controller bindings as decribed in mux-controller.txt + +Optional properties: +- idle-state : if present, the state the mux will have when idle. The + special state MUX_IDLE_AS_IS is the default. + +The multiplexer state is defined as the number represented by the +multiplexer GPIO pins, where the first pin is the least significant +bit. An active pin is a binary 1, an inactive pin is a binary 0. + +Example: + + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + + channels = "sync-1", "in", "out", "sync-2"; + }; + + i2c-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + /* ... */ + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + /* ... */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mux/mmio-mux.txt b/Documentation/devicetree/bindings/mux/mmio-mux.txt new file mode 100644 index 000000000000..a9bfb4d8b6ac --- /dev/null +++ b/Documentation/devicetree/bindings/mux/mmio-mux.txt @@ -0,0 +1,60 @@ +MMIO register bitfield-based multiplexer controller bindings + +Define register bitfields to be used to control multiplexers. The parent +device tree node must be a syscon node to provide register access. + +Required properties: +- compatible : "mmio-mux" +- #mux-control-cells : <1> +- mux-reg-masks : an array of register offset and pre-shifted bitfield mask + pairs, each describing a single mux control. +* Standard mux-controller bindings as decribed in mux-controller.txt + +Optional properties: +- idle-states : if present, the state the muxes will have when idle. The + special state MUX_IDLE_AS_IS is the default. + +The multiplexer state of each multiplexer is defined as the value of the +bitfield described by the corresponding register offset and bitfield mask pair +in the mux-reg-masks array, accessed through the parent syscon. + +Example: + + syscon { + compatible = "syscon"; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + + mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */ + <0x3 0x40>, /* 1: reg 0x3, bit 6 */ + idle-states = <MUX_IDLE_AS_IS>, <0>; + }; + }; + + video-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + + ports { + /* inputs 0..3 */ + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + port@3 { + reg = <3>; + }; + + /* output */ + port@4 { + reg = <4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mux/mux-controller.txt b/Documentation/devicetree/bindings/mux/mux-controller.txt new file mode 100644 index 000000000000..4f47e4bd2fa0 --- /dev/null +++ b/Documentation/devicetree/bindings/mux/mux-controller.txt @@ -0,0 +1,157 @@ +Common multiplexer controller bindings +====================================== + +A multiplexer (or mux) controller will have one, or several, consumer devices +that uses the mux controller. Thus, a mux controller can possibly control +several parallel multiplexers. Presumably there will be at least one +multiplexer needed by each consumer, but a single mux controller can of course +control several multiplexers for a single consumer. + +A mux controller provides a number of states to its consumers, and the state +space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer, +0-7 for an 8-way multiplexer, etc. + + +Consumers +--------- + +Mux controller consumers should specify a list of mux controllers that they +want to use with a property containing a 'mux-ctrl-list': + + mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list] + single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier] + mux-ctrl-phandle : phandle to mux controller node + mux-ctrl-specifier : array of #mux-control-cells specifying the + given mux controller (controller specific) + +Mux controller properties should be named "mux-controls". The exact meaning of +each mux controller property must be documented in the device tree binding for +each consumer. An optional property "mux-control-names" may contain a list of +strings to label each of the mux controllers listed in the "mux-controls" +property. + +Drivers for devices that use more than a single mux controller can use the +"mux-control-names" property to map the name of the requested mux controller +to an index into the list given by the "mux-controls" property. + +mux-ctrl-specifier typically encodes the chip-relative mux controller number. +If the mux controller chip only provides a single mux controller, the +mux-ctrl-specifier can typically be left out. + +Example: + + /* One consumer of a 2-way mux controller (one GPIO-line) */ + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + mux-control-names = "adc"; + + channels = "sync", "in"; + }; + +Note that in the example above, specifying the "mux-control-names" is redundant +because there is only one mux controller in the list. However, if the driver +for the consumer node in fact asks for a named mux controller, that name is of +course still required. + + /* + * Two consumers (one for an ADC line and one for an i2c bus) of + * parallel 4-way multiplexers controlled by the same two GPIO-lines. + */ + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + adc-mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + io-channel-names = "parent"; + + mux-controls = <&mux>; + + channels = "sync-1", "in", "out", "sync-2"; + }; + + i2c-mux { + compatible = "i2c-mux"; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + /* ... */ + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + /* ... */ + }; + }; + }; + + +Mux controller nodes +-------------------- + +Mux controller nodes must specify the number of cells used for the +specifier using the '#mux-control-cells' property. + +Optionally, mux controller nodes can also specify the state the mux should +have when it is idle. The idle-state property is used for this. If the +idle-state is not present, the mux controller is typically left as is when +it is idle. For multiplexer chips that expose several mux controllers, the +idle-state property is an array with one idle state for each mux controller. + +The special value (-1) may be used to indicate that the mux should be left +as is when it is idle. This is the default, but can still be useful for +mux controller chips with more than one mux controller, particularly when +there is a need to "step past" a mux controller and set some other idle +state for a mux controller with a higher index. + +Some mux controllers have the ability to disconnect the input/output of the +multiplexer. Using this disconnected high-impedance state as the idle state +is indicated with idle state (-2). + +These constants are available in + + #include <dt-bindings/mux/mux.h> + +as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2). + +An example mux controller node look like this (the adg972a chip is a triple +4-way multiplexer): + + mux: mux-controller@50 { + compatible = "adi,adg792a"; + reg = <0x50>; + #mux-control-cells = <1>; + + idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>; + }; diff --git a/Documentation/devicetree/bindings/net/cortina.txt b/Documentation/devicetree/bindings/net/cortina.txt new file mode 100644 index 000000000000..40d0bd984113 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cortina.txt @@ -0,0 +1,21 @@ +Cortina Phy Driver Device Tree Bindings +--------------------------------------- + +CORTINA is a registered trademark of Cortina Systems, Inc. + +The driver supports the Cortina Electronic Dispersion Compensation (EDC) +devices, equipped with clock and data recovery (CDR) circuits. These +devices make use of registers that are not compatible with Clause 45 or +Clause 22, therefore they need to be described using the +"ethernet-phy-id" compatible. + +Since the driver only implements polling mode support, interrupts info +can be skipped. + +Example (CS4340 phy): + mdio { + cs4340_phy@10 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x10>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt index d6c6e41648d4..8acf51a4dfa8 100644 --- a/Documentation/devicetree/bindings/net/dsa/b53.txt +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -13,6 +13,9 @@ Required properties: "brcm,bcm5397" "brcm,bcm5398" + For the BCM11360 SoC, must be: + "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string + For the BCM5310x SoCs with an integrated switch, must be one of: "brcm,bcm53010-srab" "brcm,bcm53011-srab" @@ -34,7 +37,7 @@ Required properties: "brcm,bcm6328-switch" "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. Examples: diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt new file mode 100644 index 000000000000..0ab8b39d0b30 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -0,0 +1,72 @@ +Microchip KSZ Series Ethernet switches +================================== + +Required properties: + +- compatible: For external switch chips, compatible string must be exactly one + of: "microchip,ksz9477" + +See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +required and optional properties. + +Examples: + +Ethernet switch connected via SPI to the host, CPU port wired to eth0: + + eth0: ethernet@10001000 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + spi1: spi@f8008000 { + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; + status = "okay"; + + ksz9477: ksz9477@0 { + compatible = "microchip,ksz9477"; + reg = <0>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 000000000000..725f3b187886 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,84 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: should be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun8i-v3s-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: should be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: should be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: should be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. They control the delay for +external PHY. + +Optional properties for the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" should be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +Required properties of the phy node with the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY + +Example: + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 3a6916909d90..7da86f22a13b 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -8,9 +8,11 @@ The following properties are common to the Ethernet controllers: property; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than - the maximum frame size (there's contradiction in ePAPR). + the maximum frame size (there's contradiction in the Devicetree + Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: + * "internal" * "mii" * "gmii" * "sgmii" @@ -32,9 +34,13 @@ The following properties are common to the Ethernet controllers: * "2000base-x", * "2500base-x", * "rxaui" -- phy-connection-type: the same as "phy-mode" property but described in ePAPR; + * "xaui" + * "10gbase-kr" (10GBASE-KR, XFI, SFI) +- phy-connection-type: the same as "phy-mode" property but described in the + Devicetree Specification; - phy-handle: phandle, specifies a reference to a node representing a PHY - device; this property is described in ePAPR and so preferred; + device; this property is described in the Devicetree Specification and so + preferred; - phy: the same as "phy-handle" property, not recommended for new bindings. - phy-device: the same as "phy-handle" property, not recommended for new bindings. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index df873d1f3b7c..df873d1f3b7c 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index ace4a64b3695..f7da3d73ca1b 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -9,7 +9,7 @@ the GPMC controller with an "ethernet" name. All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation @@ -43,7 +43,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/bus/ti-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Example: diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 1506e948610c..27966ae741e0 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -22,6 +22,7 @@ Required properties: Required elements: 'pclk', 'hclk' Optional elements: 'tx_clk' Optional elements: 'rx_clk' applies to cdns,zynqmp-gem + Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. Optional properties for PHY child node: diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt index ccdabdcc8618..42cd81090a2c 100644 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt @@ -1,12 +1,14 @@ * Marvell MDIO Ethernet Controller interface The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, -MV78xx0, Armada 370 and Armada XP have an identical unit that provides -an interface with the MDIO bus. This driver handles this MDIO -interface. +MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an +identical unit that provides an interface with the MDIO bus. +Additionally, Armada 7k and Armada 8k has a second unit which +provides an interface with the xMDIO bus. This driver handles +these interfaces. Required properties: -- compatible: "marvell,orion-mdio" +- compatible: "marvell,orion-mdio" or "marvell,xmdio" - reg: address and length of the MDIO registers. When an interrupt is not present, the length is the size of the SMI register (4 bytes) otherwise it must be 0x84 bytes to cover the interrupt control diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index c627bbb3009e..60c833d62181 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -13,14 +13,10 @@ Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. - autosuspend-delay: Specify autosuspend delay in milliseconds. -- vin-voltage-override: Specify voltage of VIN pin in microvolts. - irq-status-read-quirk: Specify that the trf7970a being used has the "IRQ Status Read" erratum. - en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF" erratum. -- t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum - where an extra byte is returned by Read Multiple Block commands issued - to Type 5 tags. - vdd-io-supply: Regulator specifying voltage for vdd-io - clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz @@ -37,15 +33,13 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; - vin-voltage-override = <5000000>; vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; irq-status-read-quirk; en2-rf-quirk; - t5t-rmb-extra-byte-quirk; clock-frequency = <27120000>; status = "okay"; }; diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt new file mode 100644 index 000000000000..6d9efb2eb9a5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -0,0 +1,88 @@ +* Qualcomm QCA7000 + +The QCA7000 is a serial-to-powerline bridge with a host interface which could +be configured either as SPI or UART slave. This configuration is done by +the QCA7000 firmware. + +(a) Ethernet over SPI + +In order to use the QCA7000 as SPI device it must be defined as a child of a +SPI master in the device tree. + +Required properties: +- compatible : Should be "qca,qca7000" +- reg : Should specify the SPI chip select +- interrupts : The first cell should specify the index of the source + interrupt and the second cell should specify the trigger + type as rising edge +- spi-cpha : Must be set +- spi-cpol : Must be set + +Optional properties: +- interrupt-parent : Specify the pHandle of the source interrupt +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at. + Numbers smaller than 1000000 or greater than 16000000 + are invalid. Missing the property will set the SPI + frequency to 8000000 Hertz. +- local-mac-address : see ./ethernet.txt +- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode. + In this mode the SPI master must toggle the chip select + between each data word. In burst mode these gaps aren't + necessary, which is faster. This setting depends on how + the QCA7000 is setup via GPIO pin strapping. If the + property is missing the driver defaults to burst mode. + +SPI Example: + +/* Freescale i.MX28 SPI master*/ +ssp2: spi@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + qca7000: ethernet@0 { + compatible = "qca,qca7000"; + reg = <0x0>; + interrupt-parent = <&gpio3>; /* GPIO Bank 3 */ + interrupts = <25 0x1>; /* Index: 25, rising edge */ + spi-cpha; /* SPI mode: CPHA=1 */ + spi-cpol; /* SPI mode: CPOL=1 */ + spi-max-frequency = <8000000>; /* freq: 8 MHz */ + local-mac-address = [ A0 B0 C0 D0 E0 F0 ]; + }; +}; + +(b) Ethernet over UART + +In order to use the QCA7000 as UART slave it must be defined as a child of a +UART master in the device tree. It is possible to preconfigure the UART +settings of the QCA7000 firmware, but it's not possible to change them during +runtime. + +Required properties: +- compatible : Should be "qca,qca7000" + +Optional properties: +- local-mac-address : see ./ethernet.txt +- current-speed : current baud rate of QCA7000 which defaults to 115200 + if absent, see also ../serial/slave-device.txt + +UART Example: + +/* Freescale i.MX28 UART */ +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + + qca7000: ethernet { + compatible = "qca,qca7000"; + local-mac-address = [ A0 B0 C0 D0 E0 F0 ]; + current-speed = <38400>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt deleted file mode 100644 index c74989c0d8ac..000000000000 --- a/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Qualcomm QCA7000 (Ethernet over SPI protocol) - -Note: The QCA7000 is useable as a SPI device. In this case it must be defined -as a child of a SPI master in the device tree. - -Required properties: -- compatible : Should be "qca,qca7000" -- reg : Should specify the SPI chip select -- interrupts : The first cell should specify the index of the source interrupt - and the second cell should specify the trigger type as rising edge -- spi-cpha : Must be set -- spi-cpol: Must be set - -Optional properties: -- interrupt-parent : Specify the pHandle of the source interrupt -- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at. - Numbers smaller than 1000000 or greater than 16000000 are invalid. Missing - the property will set the SPI frequency to 8000000 Hertz. -- local-mac-address: 6 bytes, MAC address -- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode. - In this mode the SPI master must toggle the chip select between each data - word. In burst mode these gaps aren't necessary, which is faster. - This setting depends on how the QCA7000 is setup via GPIO pin strapping. - If the property is missing the driver defaults to burst mode. - -Example: - -/* Freescale i.MX28 SPI master*/ -ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - qca7000: ethernet@0 { - compatible = "qca,qca7000"; - reg = <0x0>; - interrupt-parent = <&gpio3>; /* GPIO Bank 3 */ - interrupts = <25 0x1>; /* Index: 25, rising edge */ - spi-cpha; /* SPI mode: CPHA=1 */ - spi-cpol; /* SPI mode: CPOL=1 */ - spi-max-frequency = <8000000>; /* freq: 8 MHz */ - local-mac-address = [ A0 B0 C0 D0 E0 F0 ]; - }; -}; diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt index 16c3a9501f5d..acfafc8e143c 100644 --- a/Documentation/devicetree/bindings/net/smsc911x.txt +++ b/Documentation/devicetree/bindings/net/smsc911x.txt @@ -27,6 +27,7 @@ Optional properties: of the device. On many systems this is wired high so the device goes out of reset at power-on, but if it is under program control, this optional GPIO can wake up in response to it. +- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies Examples: diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index afe9630a5e7d..02c4353b5cf2 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -18,6 +18,13 @@ Optional property: - ti,max-output-impedance - MAC Interface Impedance control to set the programmable output impedance to maximum value (70 ohms). + - ti,dp83867-rxctrl-strap-quirk - This denotes the fact that the + board has RX_DV/RX_CTRL pin strapped in + mode 1 or 2. To ensure PHY operation, + there are specific actions that + software needs to take when this pin is + strapped in these modes. See data manual + for details. Note: ti,min-output-impedance and ti,max-output-impedance are mutually exclusive. When both properties are present ti,max-output-impedance diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti,wilink-st.txt index cbad73a84ac4..1649c1f66b07 100644 --- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt @@ -14,6 +14,12 @@ Required properties: - compatible: should be one of the following: "ti,wl1271-st" "ti,wl1273-st" + "ti,wl1281-st" + "ti,wl1283-st" + "ti,wl1285-st" + "ti,wl1801-st" + "ti,wl1805-st" + "ti,wl1807-st" "ti,wl1831-st" "ti,wl1835-st" "ti,wl1837-st" @@ -22,6 +28,10 @@ Optional properties: - enable-gpios : GPIO signal controlling enabling of BT. Active high. - vio-supply : Vio input supply (1.8V) - vbat-supply : Vbat input supply (2.9-4.8V) + - clocks : Must contain an entry, for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names : Must include the following entry: + "ext_clock" (External clock provided to the TI combo chip). Example: @@ -31,5 +41,7 @@ Example: bluetooth { compatible = "ti,wl1835-st"; enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + clocks = <&clk32k_wl18xx>; + clock-names = "ext_clock"; }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index 5dbf169cd81c..590f622188de 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -31,7 +31,7 @@ mmc3: mmc@01c12000 { non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt index 2a3d90de18ee..7b2cbb14113e 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt @@ -10,6 +10,7 @@ Required properties: * "ti,wl1273" * "ti,wl1281" * "ti,wl1283" + * "ti,wl1285" * "ti,wl1801" * "ti,wl1805" * "ti,wl1807" diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 94aeeeabadd5..194926f77194 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Should be one of the following. - "rockchip,rk3066a-efuse" - for RK3066a SoCs. - "rockchip,rk3188-efuse" - for RK3188 SoCs. + - "rockchip,rk322x-efuse" - for RK322x SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 63725498bd20..e36d261b9ba6 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -186,20 +186,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; clock-latency-ns = <290000>; @@ -265,20 +265,20 @@ independently. * independently. */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000; @@ -341,20 +341,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000>; @@ -367,20 +367,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1050000 1045000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1075000>; opp-microamp = <100000>; clock-latency-ns = <400000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1100000 1010000 1110000>; opp-microamp = <95000>; @@ -409,7 +409,7 @@ Example 4: Handling multiple regulators compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000>, /* Supply 0 */ <960000>, /* Supply 1 */ @@ -422,7 +422,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -435,7 +435,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -467,7 +467,7 @@ Example 5: opp-supported-hw status = "okay"; opp-shared; - opp@600000000 { + opp-600000000 { /* * Supports all substrate and process versions for 0xF * cuts, i.e. only first four cuts. @@ -478,7 +478,7 @@ Example 5: opp-supported-hw ... }; - opp@800000000 { + opp-800000000 { /* * Supports: * - cuts: only one, 6th cut (represented by 6th bit). @@ -510,7 +510,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>: compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt-slow = <915000 900000 925000>; opp-microvolt-fast = <975000 970000 985000>; @@ -518,7 +518,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>: opp-microamp-fast = <71000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ <925000 910000 935000>; /* Supply vcc1 */ diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt index 35d4a979bb7b..89a84f8aa621 100644 --- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt @@ -30,6 +30,13 @@ Mandatory properties: 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as pre-fetchable. +Optional properties: +- clocks: when present, this should contain the peripheral clock (PCLK) and the + PCI clock (PCICLK). If these are not present, they are assumed to be + hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz. +- clock-names: when present, this should contain "PCLK" for the peripheral + clock and "PCICLK" for the PCI-side clock. + Mandatory subnodes: - For "faraday,ftpci100" a node representing the interrupt-controller inside the host bridge is mandatory. It has the following mandatory properties: diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index e3d5680875b1..cf92d3ba5a26 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -33,6 +33,10 @@ Optional properties: - reset-gpio-active-high: If present then the reset sequence using the GPIO specified in the "reset-gpio" property is reversed (H=reset state, L=operation state). +- vpcie-supply: Should specify the regulator in charge of PCIe port power. + The regulator will be enabled when initializing the PCIe host and + disabled either as part of the init process or when shutting down the + host. Additional required properties for imx6sx-pcie: - clock names: Must include the following additional entries: diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt new file mode 100644 index 000000000000..68ffa0fbcd73 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -0,0 +1,50 @@ +HiSilicon Kirin SoCs PCIe host DT description + +Kirin PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver +and inherits common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties +- compatible: + "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC +- reg: Should contain rc_dbi, apb, phy, config registers location and length. +- reg-names: Must include the following entries: + "dbi": controller configuration registers; + "apb": apb Ctrl register defined by Kirin; + "phy": apb PHY register defined by Kirin; + "config": PCIe configuration space registers. +- reset-gpios: The gpio to generate PCIe perst assert and deassert signal. + +Optional properties: + +Example based on kirin960: + + pcie@f4000000 { + compatible = "hisilicon,kirin-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>; + reg-names = "dbi","apb","phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>, + <0x0 0 0 2 &gic 0 0 0 283 4>, + <0x0 0 0 3 &gic 0 0 0 284 4>, + <0x0 0 0 4 &gic 0 0 0 285 4>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", + "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk"; + reset-gpios = <&gpio11 1 0 >; + }; diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt new file mode 100644 index 000000000000..fe80dda9bf73 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt @@ -0,0 +1,130 @@ +MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs + +PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root +ports supports a Gen2 1-lane Link and has PIPE interface to PHY. + +Required properties: +- compatible: Should contain "mediatek,mt7623-pcie". +- device_type: Must be "pci" +- reg: Base addresses and lengths of the PCIe controller. +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - free_ck :for reference clock of PCIe subsys + - sys_ck0 :for clock of Port0 + - sys_ck1 :for clock of Port1 + - sys_ck2 :for clock of Port2 +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pcie-rst0 :port0 reset + - pcie-rst1 :port1 reset + - pcie-rst2 :port2 reset +- phys: List of PHY specifiers (used by generic PHY framework). +- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. +- power-domains: A phandle and power domain specifier pair to the power domain + which is responsible for collapsing and restoring power to the peripheral. +- bus-range: Range of bus numbers associated with this controller. +- ranges: Ranges for the PCI memory and I/O regions. + +In addition, the device tree node must have sub-nodes describing each +PCIe port interface, having the following mandatory properties: + +Required properties: +- device_type: Must be "pci" +- reg: Only the first four bytes are used to refer to the correct bus number + and device number. +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- #interrupt-cells: Must be 1 +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- num-lanes: Number of lanes to use for this port. + +Examples: + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie-controller@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index e15f9b19901f..9d418b71774f 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -8,6 +8,7 @@ - "qcom,pcie-apq8064" for apq8064 - "qcom,pcie-apq8084" for apq8084 - "qcom,pcie-msm8996" for msm8996 or apq8096 + - "qcom,pcie-ipq4019" for ipq4019 - reg: Usage: required @@ -87,7 +88,7 @@ - "core" Clocks the pcie hw block - "phy" Clocks the pcie PHY block - clock-names: - Usage: required for apq8084 + Usage: required for apq8084/ipq4019 Value type: <stringlist> Definition: Should contain the following entries - "aux" Auxiliary (AUX) clock @@ -126,6 +127,23 @@ Definition: Should contain the following entries - "core" Core reset +- reset-names: + Usage: required for ipq/apq8064 + Value type: <stringlist> + Definition: Should contain the following entries + - "axi_m" AXI master reset + - "axi_s" AXI slave reset + - "pipe" PIPE reset + - "axi_m_vmid" VMID reset + - "axi_s_xpu" XPU reset + - "parf" PARF reset + - "phy" PHY reset + - "axi_m_sticky" AXI sticky reset + - "pipe_sticky" PIPE sticky reset + - "pwr" PWR reset + - "ahb" AHB reset + - "phy_ahb" PHY AHB reset + - power-domains: Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 34712d6fd253..bd27428dda61 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -1,4 +1,4 @@ -* Renesas RCar PCIe interface +* Renesas R-Car PCIe interface Required properties: compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; diff --git a/Documentation/devicetree/bindings/pci/tango-pcie.txt b/Documentation/devicetree/bindings/pci/tango-pcie.txt new file mode 100644 index 000000000000..244683836a79 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/tango-pcie.txt @@ -0,0 +1,29 @@ +Sigma Designs Tango PCIe controller + +Required properties: + +- compatible: "sigma,smp8759-pcie" +- reg: address/size of PCI configuration space, address/size of register area +- bus-range: defined by size of PCI configuration space +- device_type: "pci" +- #size-cells: <2> +- #address-cells: <3> +- msi-controller +- ranges: translation from system to bus addresses +- interrupts: spec for misc interrupts, spec for MSI + +Example: + + pcie@2e000 { + compatible = "sigma,smp8759-pcie"; + reg = <0x50000000 0x400000>, <0x2e000 0x100>; + bus-range = <0 3>; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + msi-controller; + ranges = <0x02000000 0x0 0x00400000 0x50400000 0x0 0x3c00000>; + interrupts = + <54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */ + <55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */ + }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt index 09aeba94538d..32f057260351 100644 --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt @@ -3,9 +3,10 @@ Driver for Broadcom Northstar USB 3.0 PHY Required properties: - compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". -- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B - MMI. -- reg-names: "dmp" and "ccb-mii" +- reg: address of MDIO bus device +- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin) + registers +- #phy-cells: must be 0 Initialization of USB 3.0 PHY depends on Northstar version. There are currently three known series: Ax, Bx and Cx. @@ -15,9 +16,19 @@ Known B1: BCM4707 rev 6 Known C0: BCM47094 rev 0 Example: - usb3-phy { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x18105000 0x1000>, <0x18003000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; + mdio: mdio@0 { + reg = <0x0>; + #size-cells = <1>; + #address-cells = <0>; + + usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt new file mode 100644 index 000000000000..04f063aa7883 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt @@ -0,0 +1,30 @@ +BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY + +Required properties: + - compatible: brcm,ns2-drd-phy + - reg: offset and length of the NS2 PHY related registers. + - reg-names + The below registers must be provided. + icfg - for DRD ICFG configurations + rst-ctrl - for DRD IDM reset + crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset + usb2-strap - for port over current polarity reversal + - #phy-cells: Must be 0. No args required. + - vbus-gpios: vbus gpio binding + - id-gpios: id gpio binding + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usbdrd_phy: phy@66000960 { + #phy-cells = <0>; + compatible = "brcm,ns2-drd-phy"; + reg = <0x66000960 0x24>, + <0x67012800 0x4>, + <0x6501d148 0x4>, + <0x664d0700 0x4>; + reg-names = "icfg", "rst-ctrl", + "crmu-ctrl", "usb2-strap"; + id-gpios = <&gpio_g 30 0>; + vbus-gpios = <&gpio_g 31 0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index 6ccce09d8bbf..97977cd29a98 100644 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -7,12 +7,13 @@ Required properties: "brcm,iproc-ns2-sata-phy" "brcm,iproc-nsp-sata-phy" "brcm,phy-sata3" + "brcm,iproc-sr-sata-phy" - address-cells: should be 1 - size-cells: should be 0 - reg: register ranges for the PHY PCB interface - reg-names: should be "phy" and "phy-ctrl" The "phy-ctrl" registers are only required for - "brcm,iproc-ns2-sata-phy". + "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy". Sub-nodes: Each port's PHY should be represented as a sub-node. @@ -23,8 +24,8 @@ Sub-nodes required properties: Sub-nodes optional properties: - brcm,enable-ssc: use spread spectrum clocking (SSC) on this port - This property is not applicable for "brcm,iproc-ns2-sata-phy" and - "brcm,iproc-nsp-sata-phy". + This property is not applicable for "brcm,iproc-ns2-sata-phy", + "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". Example: sata-phy@f0458100 { diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt new file mode 100644 index 000000000000..a105494a0fc9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt @@ -0,0 +1,17 @@ +* Amlogic Meson GXL and GXM USB2 PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-gxl-usb2-phy" +- reg: The base address and length of the registers +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) + +Optional properties: +- phy-supply: see phy-bindings.txt in this directory + + +Example: + usb2_phy0: phy@78000 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78000 0x0 0x20>; + }; diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt index 5fa73b9d20f5..d81d73aea608 100644 --- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt @@ -1,7 +1,8 @@ -* Amlogic Meson8b and GXBB USB2 PHY +* Amlogic Meson8, Meson8b and GXBB USB2 PHY Required properties: - compatible: Depending on the platform this should be one of: + "amlogic,meson8-usb2-phy" "amlogic,meson8b-usb2-phy" "amlogic,meson-gxbb-usb2-phy" - reg: The base address and length of the registers diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt new file mode 100644 index 000000000000..2eb9b2b69037 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt @@ -0,0 +1,40 @@ +Motorola CPCAP PMIC USB PHY binding + +Required properties: +compatible: Shall be either "motorola,cpcap-usb-phy" or + "motorola,mapphone-cpcap-usb-phy" +#phy-cells: Shall be 0 +interrupts: CPCAP PMIC interrupts used by the USB PHY +interrupt-names: Interrupt names +io-channels: IIO ADC channels used by the USB PHY +io-channel-names: IIO ADC channel names +vusb-supply: Regulator for the PHY + +Optional properties: +pinctrl: Optional alternate pin modes for the PHY +pinctrl-names: Names for optional pin modes +mode-gpios: Optional GPIOs for configuring alternate modes + +Example: +cpcap_usb2_phy: phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = + "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH + &gpio1 0 GPIO_ACTIVE_HIGH>; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt index e71a8d23f4a8..84d59b0db8df 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt @@ -2,6 +2,7 @@ ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK Required properties (phy (parent) node): - compatible : should be one of the listed compatibles: + * "rockchip,rk3228-usb2phy" * "rockchip,rk3328-usb2phy" * "rockchip,rk3366-usb2phy" * "rockchip,rk3399-usb2phy" diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt new file mode 100644 index 000000000000..f94cea48f6b1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt @@ -0,0 +1,46 @@ +* Renesas R-Car generation 3 USB 3.0 PHY + +This file provides information on what the device node for the R-Car generation +3 USB 3.0 PHY contains. +If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL +instead of USB3_CLK. However, if you don't want to these features, you don't +need this driver. + +Required properties: +- compatible: "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795 + SoC. + "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796 + SoC. + "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible + device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + +- reg: offset and length of the USB 3.0 PHY register block. +- clocks: A list of phandles and clock-specifier pairs. +- clock-names: Name of the clocks. + - The funcional clock must be "usb3-if". + - The usb3's external clock must be "usb3s_clk". + - The usb2's external clock must be "usb_extal". If you want to use the ssc, + the clock-frequency must not be 0. +- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. + +Optional properties: +- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using + the following values as u32: + - 0 (or the property doesn't exist): disable the ssc + - 4980: enable the ssc as -4980 ppm + - 4492: enable the ssc as -4492 ppm + - 4003: enable the ssc as -4003 ppm + +Example (R-Car H3): + + usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index b53224473672..6f2ec9af0de2 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -20,8 +20,10 @@ Required properties: "allwinner,sun9i-a80-pinctrl" "allwinner,sun9i-a80-r-pinctrl" "allwinner,sun8i-a83t-pinctrl" + "allwinner,sun8i-a83t-r-pinctrl" "allwinner,sun8i-h3-pinctrl" "allwinner,sun8i-h3-r-pinctrl" + "allwinner,sun8i-r40-pinctrl" "allwinner,sun50i-a64-pinctrl" "allwinner,sun50i-a64-r-pinctrl" "allwinner,sun50i-h5-pinctrl" diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt new file mode 100644 index 000000000000..ca313a7aeaff --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt @@ -0,0 +1,41 @@ +Ingenic jz47xx pin controller + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may +be used as GPIOs, multiplexed device functions are configured within the +GPIO port configuration registers and it is typical to refer to pins using the +naming scheme "PxN" where x is a character identifying the GPIO port with +which the pin is associated and N is an integer from 0 to 31 identifying the +pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and +PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to +PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a +total of 192 pins. + + +Required properties: +-------------------- + + - compatible: One of: + - "ingenic,jz4740-pinctrl" + - "ingenic,jz4770-pinctrl" + - "ingenic,jz4780-pinctrl" + - reg: Address range of the pinctrl registers. + + +GPIO sub-nodes +-------------- + +The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver; +please refer to ../gpio/ingenic,gpio.txt. + + +Example: +-------- + +pinctrl: pin-controller@10010000 { + compatible = "ingenic,jz4740-pinctrl"; + reg = <0x10010000 0x400>; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index f01d154090da..62d0f33fa65e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -204,21 +204,22 @@ each single pin the number of required sub-nodes containing "pin" and maintain. For cases like this, the pin controller driver may use the pinmux helper -property, where the pin identifier is packed with mux configuration settings -in a single integer. +property, where the pin identifier is provided with mux configuration settings +in a pinmux group. A pinmux group consists of the pin identifier and mux +settings represented as a single integer or an array of integers. -The pinmux property accepts an array of integers, each of them describing +The pinmux property accepts an array of pinmux groups, each of them describing a single pin multiplexing configuration. pincontroller { state_0_node_a { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ...; + pinmux = <PINMUX_GROUP>, <PINMUX_GROUP>, ...; }; }; Each individual pin controller driver bindings documentation shall specify -how those values (pin IDs and pin multiplexing configuration) are defined and -assembled together. +how pin IDs and pin multiplexing configuration are defined and assembled +together in a pinmux group. == Generic pin configuration node content == @@ -251,14 +252,20 @@ drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source drive-strength - sink or source at most X mA -input-enable - enable input on pin (no effect on output) -input-disable - disable input on pin (no effect on output) +input-enable - enable input on pin (no effect on output, such as + enabling an input buffer) +input-disable - disable input on pin (no effect on output, such as + disabling an input buffer) input-schmitt-enable - enable schmitt-trigger mode input-schmitt-disable - disable schmitt-trigger mode input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode +output-disable - disable output on a pin (such as disable an output + buffer) +output-enable - enable output on a pin without actively driving it + (such as enabling an output buffer) output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate @@ -300,7 +307,7 @@ arguments are described below. - pinmux takes a list of pin IDs and mux settings as required argument. The specific bindings for the hardware defines: - How pin IDs and mux settings are defined and assembled together in a single - integer. + integer or an array of integers. - bias-pull-up, -down and -pin-default take as optional argument on hardware supporting it the pull strength in Ohm. bias-disable will disable the pull. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt new file mode 100644 index 000000000000..e219849b21ca --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt @@ -0,0 +1,85 @@ +* ZTE ZX Pin Controller + +The pin controller on ZTE ZX platforms is kinda of hybrid. It consists of +a main controller and an auxiliary one. For example, on ZX296718 SoC, the +main controller is TOP_PMM and the auxiliary one is AON_IOCFG. Both +controllers work together to control pin multiplexing and configuration in +the way illustrated as below. + + + GMII_RXD3 ---+ + | + DVI1_HS ---+----------------------------- GMII_RXD3 (TOP pin) + | + BGPIO16 ---+ ^ + | pinconf + ^ | + | pinmux | + | | + + TOP_PMM (main) AON_IOCFG (aux) + + | | | + | pinmux | | + | pinmux v | + v | pinconf + KEY_ROW2 ---+ v + PORT1_LCD_TE ---+ | + | AGPIO10 ---+------ KEY_ROW2 (AON pin) + I2S0_DOUT3 ---+ | + |-----------------------+ + PWM_OUT3 ---+ + | + VGA_VS1 ---+ + + +For most of pins like GMII_RXD3 in the figure, the pinmux function is +controlled by TOP_PMM block only, and this type of pins are meant by term +'TOP pins'. For pins like KEY_ROW2, the pinmux is controlled by both +TOP_PMM and AON_IOCFG blocks, as the available multiplexing functions for +the pin spread in both controllers. This type of pins are called 'AON pins'. +Though pinmux implementation is quite different, pinconf is same for both +types of pins. Both are controlled by auxiliary controller, i.e. AON_IOCFG +on ZX296718. + +Required properties: +- compatible: should be "zte,zx296718-pmm". +- reg: the register physical address and length. +- zte,auxiliary-controller: phandle to the auxiliary pin controller which + implements pinmux for AON pins and pinconf for all pins. + +The following pin configuration are supported. Please refer to +pinctrl-bindings.txt in this directory for more details of the common +pinctrl bindings used by client devices. + +- bias-pull-up +- bias-pull-down +- drive-strength +- input-enable +- slew-rate + +Examples: + +iocfg: pin-controller@119000 { + compatible = "zte,zx296718-iocfg"; + reg = <0x119000 0x1000>; +}; + +pmm: pin-controller@1462000 { + compatible = "zte,zx296718-pmm"; + reg = <0x1462000 0x1000>; + zte,auxiliary-controller = <&iocfg>; +}; + +&pmm { + vga_pins: vga { + pins = "KEY_COL1", "KEY_COL2", "KEY_ROW1", "KEY_ROW2"; + function = "VGA"; + }; +}; + +&vga { + pinctrl-names = "default"; + pinctrl-0 = <&vga_pins>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt new file mode 100644 index 000000000000..407b9443629d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt @@ -0,0 +1,172 @@ +Qualcomm Technologies, Inc. IPQ8074 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +IPQ8074 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,ipq8074-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio69 + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, + cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, + ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, + mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, + mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, + pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, + pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, + pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, + qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, + wci2b, wci2c, wci2d + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2: uart2-default { + mux { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + }; + + rx { + pins = "gpio23"; + drive-strength = <4>; + bias-disable; + }; + + tx { + pins = "gpio24"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 13df9498311a..645082f03259 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -13,6 +13,8 @@ Required Properties: - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller. - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller. - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller. + - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller. + - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller. - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller. - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt new file mode 100644 index 000000000000..43e21474528a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt @@ -0,0 +1,221 @@ +Renesas RZ/A1 combined Pin and GPIO controller + +The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO controller, +named "Ports" in the hardware reference manual. +Pin multiplexing and GPIO configuration is performed on a per-pin basis +writing configuration values to per-port register sets. +Each "port" features up to 16 pins, each of them configurable for GPIO +function (port mode) or in alternate function mode. +Up to 8 different alternate function modes exist for each single pin. + +Pin controller node +------------------- + +Required properties: + - compatible + this shall be "renesas,r7s72100-ports". + + - reg + address base and length of the memory area where the pin controller + hardware is mapped to. + +Example: +Pin controller node for RZ/A1H SoC (r7s72100) + +pinctrl: pin-controller@fcfe3000 { + compatible = "renesas,r7s72100-ports"; + + reg = <0xfcfe3000 0x4230>; +}; + +Sub-nodes +--------- + +The child nodes of the pin controller node describe a pin multiplexing +function or a GPIO controller alternatively. + +- Pin multiplexing sub-nodes: + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + A single sub-node may define several pin configurations. + A few alternate function require special pin configuration flags to be + supplied along with the alternate function configuration number. + The hardware reference manual specifies when a pin function requires + "software IO driven" mode to be specified. To do so use the generic + properties from the <include/linux/pinctrl/pinconf_generic.h> header file + to instruct the pin controller to perform the desired pin configuration + operation. + Please refer to pinctrl-bindings.txt to get to know more on generic + pin properties usage. + + The allowed generic formats for a pin multiplexing sub-node are the + following ones: + + node-1 { + pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; + GENERIC_PINCONFIG; + }; + + node-2 { + sub-node-1 { + pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; + GENERIC_PINCONFIG; + }; + + sub-node-2 { + pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; + GENERIC_PINCONFIG; + }; + + ... + + sub-node-n { + pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; + GENERIC_PINCONFIG; + }; + }; + + Use the second format when pins part of the same logical group need to have + different generic pin configuration flags applied. + + Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle + of the most external one. + + Eg. + + client-1 { + ... + pinctrl-0 = <&node-1>; + ... + }; + + client-2 { + ... + pinctrl-0 = <&node-2>; + ... + }; + + Required properties: + - pinmux: + integer array representing pin number and pin multiplexing configuration. + When a pin has to be configured in alternate function mode, use this + property to identify the pin by its global index, and provide its + alternate function configuration number along with it. + When multiple pins are required to be configured as part of the same + alternate function they shall be specified as members of the same + argument list of a single "pinmux" property. + Helper macros to ease assembling the pin index from its position + (port where it sits on and pin number) and alternate function identifier + are provided by the pin controller header file at: + <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> + Integers values in "pinmux" argument list are assembled as: + ((PORT * 16 + PIN) | MUX_FUNC << 16) + + Optional generic properties: + - input-enable: + enable input bufer for pins requiring software driven IO input + operations. + - output-high: + enable output buffer for pins requiring software driven IO output + operations. output-low can be used alternatively, as line value is + ignored by the driver. + + The hardware reference manual specifies when a pin has to be configured to + work in bi-directional mode and when the IO direction has to be specified + by software. Bi-directional pins are managed by the pin controller driver + internally, while software driven IO direction has to be explicitly + selected when multiple options are available. + + Example: + A serial communication interface with a TX output pin and an RX input pin. + + &pinctrl { + scif2_pins: serial2 { + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + }; + + Pin #0 on port #3 is configured as alternate function #6. + Pin #2 on port #3 is configured as alternate function #4. + + Example 2: + I2c master: both SDA and SCL pins need bi-directional operations + + &pinctrl { + i2c2_pins: i2c2 { + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + }; + + Pin #4 on port #1 is configured as alternate function #1. + Pin #5 on port #1 is configured as alternate function #1. + Both need to work in bi-directional mode, the driver manages this internally. + + Example 3: + Multi-function timer input and output compare pins. + Configure TIOC0A as software driven input and TIOC0B as software driven + output. + + &pinctrl { + tioc0_pins: tioc0 { + tioc0_input_pins { + pinumx = <RZA1_PINMUX(4, 0, 2)>; + input-enable; + }; + + tioc0_output_pins { + pinmux = <RZA1_PINMUX(4, 1, 1)>; + output-enable; + }; + }; + }; + + &tioc0 { + ... + pinctrl-0 = <&tioc0_pins>; + ... + }; + + Pin #0 on port #4 is configured as alternate function #2 with IO direction + specified by software as input. + Pin #1 on port #4 is configured as alternate function #1 with IO direction + specified by software as output. + +- GPIO controller sub-nodes: + Each port of the r7s72100 pin controller hardware is itself a GPIO controller. + Different SoCs have different numbers of available pins per port, but + generally speaking, each of them can be configured in GPIO ("port") mode + on this hardware. + Describe GPIO controllers using sub-nodes with the following properties. + + Required properties: + - gpio-controller + empty property as defined by the GPIO bindings documentation. + - #gpio-cells + number of cells required to identify and configure a GPIO. + Shall be 2. + - gpio-ranges + Describes a GPIO controller specifying its specific pin base, the pin + base in the global pin numbering space, and the number of controlled + pins, as defined by the GPIO bindings documentation. Refer to + Documentation/devicetree/bindings/gpio/gpio.txt file for a more detailed + description. + + Example: + A GPIO controller node, controlling 16 pins indexed from 0. + The GPIO controller base in the global pin indexing space is pin 48, thus + pins [0 - 15] on this controller map to pins [48 - 63] in the global pin + indexing space. + + port3: gpio-3 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + A device node willing to use pins controlled by this GPIO controller, shall + refer to it as follows: + + led1 { + gpios = <&port3 10 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt new file mode 100644 index 000000000000..007b9a7ae723 --- /dev/null +++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt @@ -0,0 +1,17 @@ +Actions Semi Owl Smart Power System (SPS) + +Required properties: +- compatible : "actions,s500-sps" for S500 +- reg : Offset and length of the register set for the device. +- #power-domain-cells : Must be 1. + See macros in: + include/dt-bindings/power/owl-s500-powergate.h for S500 + + +Example: + + sps: power-controller@b01b0100 { + compatible = "actions,s500-sps"; + reg = <0xb01b0100 0x100>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index d3a5a93a65cd..43c21fb04564 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -32,6 +32,7 @@ SoC is on the same page. Required properties: - compatible: should be one of: - "rockchip,rk3188-io-voltage-domain" for rk3188 + - "rockchip,rk3228-io-voltage-domain" for rk3228 - "rockchip,rk3288-io-voltage-domain" for rk3288 - "rockchip,rk3328-io-voltage-domain" for rk3328 - "rockchip,rk3368-io-voltage-domain" for rk3368 @@ -59,6 +60,12 @@ Possible supplies for rk3188: - vccio1-supply: The supply connected to VCCIO1. Sometimes also labeled VCCIO1 and VCCIO2. +Possible supplies for rk3228: +- vccio1-supply: The supply connected to VCCIO1. +- vccio2-supply: The supply connected to VCCIO2. +- vccio3-supply: The supply connected to VCCIO3. +- vccio4-supply: The supply connected to VCCIO4. + Possible supplies for rk3288: - audio-supply: The supply connected to APIO4_VDD. - bb-supply: The supply connected to APIO5_VDD. diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt new file mode 100644 index 000000000000..f4d3b4a10b43 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -0,0 +1,57 @@ +Battery Characteristics + +The devicetree battery node provides static battery characteristics. +In smart batteries, these are typically stored in non-volatile memory +on a fuel gauge chip. The battery node should be used where there is +no appropriate non-volatile memory, or it is unprogrammed/incorrect. + +Upstream dts files should not include battery nodes, unless the battery +represented cannot easily be replaced in the system by one of a +different type. This prevents unpredictable, potentially harmful, +behavior should a replacement that changes the battery type occur +without a corresponding update to the dtb. + +Required Properties: + - compatible: Must be "simple-battery" + +Optional Properties: + - voltage-min-design-microvolt: drained battery voltage + - energy-full-design-microwatt-hours: battery design energy + - charge-full-design-microamp-hours: battery design capacity + - precharge-current-microamp: current for pre-charge phase + - charge-term-current-microamp: current for charge termination phase + - constant-charge-current-max-microamp: maximum constant input current + - constant-charge-voltage-max-microvolt: maximum constant input voltage + +Battery properties are named, where possible, for the corresponding +elements in enum power_supply_property, defined in +https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h + +Batteries must be referenced by chargers and/or fuel-gauges +using a phandle. The phandle's property should be named +"monitored-battery". + +Example: + + bat: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3200000>; + energy-full-design-microwatt-hours = <5290000>; + charge-full-design-microamp-hours = <1430000>; + precharge-current-microamp = <256000>; + charge-term-current-microamp = <128000>; + constant-charge-current-max-microamp = <900000>; + constant-charge-voltage-max-microvolt = <4200000>; + }; + + charger: charger@11 { + .... + monitored-battery = <&bat>; + ... + }; + + fuel_gauge: fuel-gauge@22 { + .... + monitored-battery = <&bat>; + ... + }; diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt index b0c95ef63e68..6858e1a804ad 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt @@ -1,7 +1,7 @@ -Binding for TI BQ27XXX fuel gauge family +TI BQ27XXX fuel gauge family Required properties: -- compatible: Should contain one of the following: +- compatible: contains one of the following: * "ti,bq27200" - BQ27200 * "ti,bq27210" - BQ27210 * "ti,bq27500" - deprecated, use revision specific property below @@ -26,11 +26,28 @@ Required properties: * "ti,bq27425" - BQ27425 * "ti,bq27441" - BQ27441 * "ti,bq27621" - BQ27621 -- reg: integer, i2c address of the device. +- reg: integer, I2C address of the fuel gauge. + +Optional properties: +- monitored-battery: phandle of battery characteristics node + The fuel gauge uses the following battery properties: + + energy-full-design-microwatt-hours + + charge-full-design-microamp-hours + + voltage-min-design-microvolt + Both or neither of the *-full-design-*-hours properties must be set. + See Documentation/devicetree/bindings/power/supply/battery.txt Example: -bq27510g3 { - compatible = "ti,bq27510g3"; - reg = <0x55>; -}; + bat: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3200000>; + energy-full-design-microwatt-hours = <5290000>; + charge-full-design-microamp-hours = <1430000>; + }; + + bq27510g3: fuel-gauge@55 { + compatible = "ti,bq27510g3"; + reg = <0x55>; + monitored-battery = <&bat>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt b/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt new file mode 100644 index 000000000000..a04efa22da01 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.txt @@ -0,0 +1,31 @@ +Motorola CPCAP PMIC battery driver binding + +Required properties: +- compatible: Shall be "motorola,cpcap-battery" +- interrupts: Interrupt specifier for each name in interrupt-names +- interrupt-names: Should contain the following entries: + "lowbph", "lowbpl", "chrgcurr1", "battdetb" +- io-channels: IIO ADC channel specifier for each name in io-channel-names +- io-channel-names: Should contain the following entries: + "battdetb", "battp", "chg_isense", "batti" +- power-supplies: List of phandles for power-supplying devices, as + described in power_supply.txt. Typically a reference + to cpcap_charger. + +Example: + +cpcap_battery: battery { + compatible = "motorola,cpcap-battery"; + interrupts-extended = < + &cpcap 5 0 &cpcap 3 0 + &cpcap 20 0 &cpcap 54 0 + >; + interrupt-names = + "lowbph", "lowbpl", + "chrgcurr1", "battdetb"; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 5 &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "chg_isense", "batti"; + power-supplies = <&cpcap_charger>; +}; diff --git a/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt new file mode 100644 index 000000000000..71f2840e8209 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt @@ -0,0 +1,27 @@ +ltc3651-charger + +Required properties: + - compatible: "lltc,ltc3651-charger" + - lltc,acpr-gpios: Connect to ACPR output. See remark below. + +Optional properties: + - lltc,fault-gpios: Connect to FAULT output. See remark below. + - lltc,chrg-gpios: Connect to CHRG output. See remark below. + +The ltc3651 outputs are open-drain type and active low. The driver assumes the +GPIO reports "active" when the output is asserted, so if the pins have been +connected directly, the GPIO flags should be set to active low also. + +The driver will attempt to aquire interrupts for all GPIOs to detect changes in +line state. If the system is not capabale of providing interrupts, the driver +cannot report changes and userspace will need to periodically read the sysfs +attributes to detect changes. + +Example: + + charger: battery-charger { + compatible = "lltc,ltc3651-charger"; + lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>; + lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>; + lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/max8903-charger.txt b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt index f0f4e12b076e..f0f4e12b076e 100644 --- a/Documentation/devicetree/bindings/power/max8903-charger.txt +++ b/Documentation/devicetree/bindings/power/supply/max8903-charger.txt diff --git a/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt index e03e85ae6572..e03e85ae6572 100644 --- a/Documentation/devicetree/bindings/power_supply/maxim,max14656.txt +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.txt diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index f8cd2397aa04..d63ab1dec16d 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -3,10 +3,10 @@ Power Architecture CPU Binding Copyright 2013 Freescale Semiconductor Inc. Power Architecture CPUs in Freescale SOCs are represented in device trees as -per the definition in ePAPR. +per the definition in the Devicetree Specification. -In addition to the ePAPR definitions, the properties defined below may be -present on CPU nodes. +In addition to the the Devicetree Specification definitions, the properties +defined below may be present on CPU nodes. PROPERTIES diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt index dc9bb3182525..8a70696395a7 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt @@ -1,7 +1,7 @@ Freescale L2 Cache Controller L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms. -The cache bindings explained below are ePAPR compliant +The cache bindings explained below are Devicetree Specification compliant Required Properties: diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt index b9a8a2bcfae7..0496ada4bba4 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt @@ -124,8 +124,8 @@ Port-Write Unit: A single IRQ that handles port-write conditions is specified by this property. (Typically shared with error). - Note: All other standard properties (see the ePAPR) are allowed - but are optional. + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. Example: rmu: rmu@d3000 { diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt index 07abf0f2f440..86ee6ea73754 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt @@ -72,7 +72,8 @@ the following properties: represents the LIODN associated with maintenance transactions for the port. -Note: All other standard properties (see ePAPR) are allowed but are optional. +Note: All other standard properties (see the Devicetree Specification) +are allowed but are optional. Example: diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt index 7c9f6ee918f1..45ce054d844d 100644 --- a/Documentation/devicetree/bindings/property-units.txt +++ b/Documentation/devicetree/bindings/property-units.txt @@ -25,8 +25,10 @@ Distance Electricity ---------------------------------------- -microamp : micro amps +-microamp-hours : micro amp-hours -ohms : Ohms -micro-ohms : micro Ohms +-microwatt-hours: micro Watt-hours -microvolt : micro volts -picofarads : picofarads diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt new file mode 100644 index 000000000000..07590bcdad15 --- /dev/null +++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt @@ -0,0 +1,13 @@ +* Broadcom Digital Timing Engine(DTE) based PTP clock driver + +Required properties: +- compatible: should be "brcm,ptp-dte" +- reg: address and length of the DTE block's NCO registers + +Example: + +ptp_dte: ptp_dte@180af650 { + compatible = "brcm,ptp-dte"; + reg = <0x180af650 0x10>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 5376a4468cb6..5b07bebbf6f7 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -2,7 +2,9 @@ Amlogic Meson PWM Controller ============================ Required properties: -- compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm". +- compatible: Shall contain "amlogic,meson8b-pwm" + or "amlogic,meson-gxbb-pwm" + or "amlogic,meson-gxbb-ao-pwm" - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt index 6dd040363e5e..3e6d55018d7a 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt @@ -24,7 +24,7 @@ Example: compatible = "st,stm32-timers"; reg = <0x40010000 0x400>; clocks = <&rcc 0 160>; - clock-names = "clk_int"; + clock-names = "int"; pwm { compatible = "st,stm32-pwm"; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index d6de64335022..7e94b802395d 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,pwm-r8a7791": for R-Car M2-W - "renesas,pwm-r8a7794": for R-Car E2 - "renesas,pwm-r8a7795": for R-Car H3 + - "renesas,pwm-r8a7796": for R-Car M3-W - reg: base address and length of the registers block for the PWM. - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index d18edb075e1c..378f6dc8b8bd 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -24,6 +24,14 @@ Optional properties: - regulator-settling-time-us: Settling time, in microseconds, for voltage change if regulator have the constant time for any level voltage change. This is useful when regulator have exponential voltage change. +- regulator-settling-time-up-us: Settling time, in microseconds, for voltage + increase if the regulator needs a constant time to settle after voltage + increases of any level. This is useful for regulators with exponential + voltage changes. +- regulator-settling-time-down-us: Settling time, in microseconds, for voltage + decrease if the regulator needs a constant time to settle after voltage + decreases of any level. This is useful for regulators with exponential + voltage changes. - regulator-soft-start: Enable soft start so that voltage ramps slowly - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt new file mode 100644 index 000000000000..2aac1aa4123d --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt @@ -0,0 +1,133 @@ +TI Keystone DSP devices +======================= + +The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core +sub-systems that are used to offload some of the processor-intensive tasks or +algorithms, for achieving various system level goals. + +These processor sub-systems usually contain additional sub-modules like L1 +and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller, +a dedicated local power/sleep controller etc. The DSP processor core in +Keystone 2 SoCs is usually a TMS320C66x CorePac processor. + +DSP Device Node: +================ +Each DSP Core sub-system is represented as a single DT node, and should also +have an alias with the stem 'rproc' defined. Each node has a number of required +or optional properties that enable the OS running on the host processor (ARM +CorePac) to perform the device management of the remote processor and to +communicate with the remote processor. + +Required properties: +-------------------- +The following are the mandatory properties: + +- compatible: Should be one of the following, + "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs + "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs + "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs + +- reg: Should contain an entry for each value in 'reg-names'. + Each entry should have the memory region's start address + and the size of the region, the representation matching + the parent node's '#address-cells' and '#size-cells' values. + +- reg-names: Should contain strings with the following names, each + representing a specific internal memory region, and + should be defined in this order, + "l2sram", "l1pram", "l1dram" + +- clocks: Should contain the device's input clock, and should be + defined as per the bindings in, + Documentation/devicetree/bindings/clock/keystone-gate.txt + +- ti,syscon-dev: Should be a pair of the phandle to the Keystone Device + State Control node, and the register offset of the DSP + boot address register within that node's address space. + +- resets: Should contain the phandle to the reset controller node + managing the resets for this device, and a reset + specifier. Please refer to the following reset bindings + for the reset argument specifier as per SoC, + Documentation/devicetree/bindings/reset/ti-syscon-reset.txt + for 66AK2HK/66AK2L/66AK2E SoCs + +- interrupt-parent: Should contain a phandle to the Keystone 2 IRQ controller + IP node that is used by the ARM CorePac processor to + receive interrupts from the DSP remote processors. See + Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt + for details. + +- interrupts: Should contain an entry for each value in 'interrupt-names'. + Each entry should have the interrupt source number used by + the remote processor to the host processor. The values should + follow the interrupt-specifier format as dictated by the + 'interrupt-parent' node. The purpose of each is as per the + description in the 'interrupt-names' property. + +- interrupt-names: Should contain strings with the following names, each + representing a specific interrupt, + "vring" - interrupt for virtio based IPC + "exception" - interrupt for exception notification + +- kick-gpios: Should specify the gpio device needed for the virtio IPC + stack. This will be used to interrupt the remote processor. + The gpio device to be used is as per the bindings in, + Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt + +Optional properties: +-------------------- + +- memory-region: phandle to the reserved memory node to be associated + with the remoteproc device. The reserved memory node + can be a CMA memory node, and should be defined as + per the bindings in + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt + + +Example: +-------- + /* 66AK2H/K DSP aliases */ + aliases { + rproc0 = &dsp0; + rproc1 = &dsp1; + rproc2 = &dsp2; + rproc3 = &dsp3; + rproc4 = &dsp4; + rproc5 = &dsp5; + rproc6 = &dsp6; + rproc7 = &dsp7; + }; + + /* 66AK2H/K DSP memory node */ + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_common_memory: dsp-common-memory@81f800000 { + compatible = "shared-dma-pool"; + reg = <0x00000008 0x1f800000 0x00000000 0x800000>; + reusable; + }; + }; + + /* 66AK2H/K DSP node */ + soc { + dsp0: dsp@10800000 { + compatible = "ti,k2hk-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + clocks = <&clkgem0>; + ti,syscon-dev = <&devctrl 0x40>; + resets = <&pscrst 0>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + memory-region = <&dsp_common_memory>; + }; + + }; diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt index 3da0ebdba8d9..16291f2a4688 100644 --- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt +++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt @@ -68,6 +68,9 @@ Linux implementation note: - If a "linux,cma-default" property is present, then Linux will use the region for the default pool of the contiguous memory allocator. +- If a "linux,dma-default" property is present, then Linux will use the + region for the default pool of the consistent DMA allocator. + Device node references to reserved memory ----------------------------------------- Regions in the /reserved-memory node may be referenced by other device diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.txt b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt new file mode 100644 index 000000000000..8b1cf022f18a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.txt @@ -0,0 +1,62 @@ +Texas Instruments System Control Interface (TI-SCI) Reset Controller +===================================================================== + +Some TI SoCs contain a system controller (like the Power Management Micro +Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling +the state of the various hardware modules present on the SoC. Communication +between the host processor running an OS and the system controller happens +through a protocol called TI System Control Interface (TI-SCI protocol). +For TI SCI details, please refer to the document, +Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +TI-SCI Reset Controller Node +============================ +This reset controller node uses the TI SCI protocol to perform the reset +management of various hardware modules present on the SoC. Must be a child +node of the associated TI-SCI system controller node. + +Required properties: +-------------------- + - compatible : Should be "ti,sci-reset" + - #reset-cells : Should be 2. Please see the reset consumer node below for + usage details. + +TI-SCI Reset Consumer Nodes +=========================== +Each of the reset consumer nodes should have the following properties, +in addition to their own properties. + +Required properties: +-------------------- + - resets : A phandle and reset specifier pair, one pair for each reset + signal that affects the device, or that the device manages. + The phandle should point to the TI-SCI reset controller node, + and the reset specifier should have 2 cell-values. The first + cell should contain the device ID. The second cell should + contain the reset mask value used by system controller. + Please refer to the protocol documentation for these values + to be used for different devices, + http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data + +Please also refer to Documentation/devicetree/bindings/reset/reset.txt for +common reset controller usage by consumers. + +Example: +-------- +The following example demonstrates both a TI-SCI reset controller node and a +consumer (a DSP device) on the 66AK2G SoC. + +pmmc: pmmc { + compatible = "ti,k2g-sci"; + + k2g_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; +}; + +dsp0: dsp@10800000 { + ... + resets = <&k2g_reset 0x0046 0x1>; + ... +}; diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.txt b/Documentation/devicetree/bindings/rng/mtk-rng.txt index a6d62a2abd39..366b99bff8cd 100644 --- a/Documentation/devicetree/bindings/rng/mtk-rng.txt +++ b/Documentation/devicetree/bindings/rng/mtk-rng.txt @@ -2,7 +2,9 @@ Device-Tree bindings for Mediatek random number generator found in Mediatek SoC family Required properties: -- compatible : Should be "mediatek,mt7623-rng" +- compatible : Should be + "mediatek,mt7622-rng", "mediatek,mt7623-rng" : for MT7622 + "mediatek,mt7623-rng" : for MT7623 - clocks : list of clock specifiers, corresponding to entries in clock-names property; - clock-names : Should contain "rng" entries; diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt index 6616d15866a3..214940093b55 100644 --- a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt +++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt @@ -5,6 +5,13 @@ Required properties: - reg : base address to sample from - period : wait time in microseconds to use between samples +Optional properties: +- quality : estimated number of bits of true entropy per 1024 bits read from the + rng. Defaults to zero which causes the kernel's default quality to + be used instead. Note that the default quality is usually zero + which disables using this rng to automatically fill the kernel's + entropy pool. + N.B. currently 'reg' must be four bytes wide and aligned Example: diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt new file mode 100644 index 000000000000..1d990bcc0baf --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt @@ -0,0 +1,22 @@ +Broadcom STB wake-up Timer + +The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the +ability to wake up the system from low-power suspend/standby modes. + +Required properties: +- compatible : should contain "brcm,brcmstb-waketimer" +- reg : the register start and length for the WKTMR block +- interrupts : The TIMER interrupt +- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2 + interrupt controller node +- clocks : The phandle to the UPG fixed clock (27Mhz domain) + +Example: + +waketimer@f0411580 { + compatible = "brcm,brcmstb-waketimer"; + reg = <0xf0411580 0x14>; + interrupts = <0x3>; + interrupt-parent = <&aon_pm_l2_intc>; + clocks = <&upg_fixed>; +}; diff --git a/Documentation/devicetree/bindings/rtc/cortina,gemini.txt b/Documentation/devicetree/bindings/rtc/cortina,gemini.txt deleted file mode 100644 index 4ce4e794ddbb..000000000000 --- a/Documentation/devicetree/bindings/rtc/cortina,gemini.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Cortina Systems Gemini RTC - -Gemini SoC real-time clock. - -Required properties: -- compatible : Should be "cortina,gemini-rtc" - -Examples: - -rtc@45000000 { - compatible = "cortina,gemini-rtc"; - reg = <0x45000000 0x100>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt new file mode 100644 index 000000000000..e3938f5e0b6c --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt @@ -0,0 +1,28 @@ +* Faraday Technology FTRTC010 Real Time Clock + +This RTC appears in for example the Storlink Gemini family of +SoCs. + +Required properties: +- compatible : Should be one of: + "faraday,ftrtc010" + "cortina,gemini-rtc", "faraday,ftrtc010" + +Optional properties: +- clocks: when present should contain clock references to the + PCLK and EXTCLK clocks. Faraday calls the later CLK1HZ and + says the clock should be 1 Hz, but implementers actually seem + to choose different clocks here, like Cortina who chose + 32768 Hz (a typical low-power clock). +- clock-names: should name the clocks "PCLK" and "EXTCLK" + respectively. + +Examples: + +rtc@45000000 { + compatible = "cortina,gemini-rtc"; + reg = <0x45000000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&foo 0>, <&foo 1>; + clock-names = "PCLK", "EXTCLK"; +}; diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt index e2837b951237..0a4c371a9b7a 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -1,17 +1,25 @@ STM32 Real Time Clock Required properties: -- compatible: "st,stm32-rtc". +- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on + the device is compatible with stm32(f4/f7) or stm32h7. - reg: address range of rtc register set. -- clocks: reference to the clock entry ck_rtc. +- clocks: can use up to two clocks, depending on part used: + - "rtc_ck": RTC clock source. + It is required on stm32(f4/f7) and stm32h7. + - "pclk": RTC APB interface clock. + It is not present on stm32(f4/f7). + It is required on stm32h7. +- clock-names: must be "rtc_ck" and "pclk". + It is required only on stm32h7. - interrupt-parent: phandle for the interrupt controller. - interrupts: rtc alarm interrupt. - st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain (RTC registers) write protection. -Optional properties (to override default ck_rtc parent clock): -- assigned-clocks: reference to the ck_rtc clock entry. -- assigned-clock-parents: phandle of the new parent clock of ck_rtc. +Optional properties (to override default rtc_ck parent clock): +- assigned-clocks: reference to the rtc_ck clock entry. +- assigned-clock-parents: phandle of the new parent clock of rtc_ck. Example: @@ -25,3 +33,17 @@ Example: interrupts = <17 1>; st,syscfg = <&pwrcfg>; }; + + rtc: rtc@58004000 { + compatible = "st,stm32h7-rtc"; + reg = <0x58004000 0x400>; + clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>; + clock-names = "pclk", "rtc_ck"; + assigned-clocks = <&rcc RTC_CK>; + assigned-clock-parents = <&rcc LSE_CK>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 10276a46ecef..419ff6c0a47f 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -20,6 +20,8 @@ Required properties: - "fsl,16550-FIFO64" - "fsl,ns16550" - "ti,da830-uart" + - "aspeed,ast2400-vuart" + - "aspeed,ast2500-vuart" - "serial" if the port type is unknown. - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. @@ -45,6 +47,7 @@ Optional properties: property. - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. +- resets : phandle + reset specifier pairs Note: * fsl,ns16550: diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt new file mode 100644 index 000000000000..aa873eada02d --- /dev/null +++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt @@ -0,0 +1,16 @@ +Actions Semi Owl UART + +Required properties: +- compatible : "actions,s500-uart", "actions,owl-uart" for S500 + "actions,s900-uart", "actions,owl-uart" for S900 +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. + + +Example: + + uart3: serial@b0126000 { + compatible = "actions,s500-uart", "actions,owl-uart"; + reg = <0xb0126000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt new file mode 100644 index 000000000000..8ff65fa632fd --- /dev/null +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt @@ -0,0 +1,38 @@ +Amlogic Meson SoC UART Serial Interface +======================================= + +The Amlogic Meson SoC UART Serial Interface is present on a large range +of SoCs, and can be present either in the "Always-On" power domain or the +"Everything-Else" power domain. + +The particularity of the "Always-On" Serial Interface is that the hardware +is active since power-on and does not need any clock gating and is usable +as very early serial console. + +Required properties: +- compatible : compatible: value should be different for each SoC family as : + - Meson6 : "amlogic,meson6-uart" + - Meson8 : "amlogic,meson8-uart" + - Meson8b : "amlogic,meson8b-uart" + - GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart" + eventually followed by : "amlogic,meson-ao-uart" if this UART interface + is in the "Always-On" power domain. +- reg : offset and length of the register set for the device. +- interrupts : identifier to the device interrupt +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock names. +- clocks-names : + * "xtal" for external xtal clock identifier + * "pclk" for the bus core clock, either the clk81 clock or the gate clock + * "baud" for the source of the baudrate generator, can be either the xtal + or the pclk. + +e.g. +uart_A: serial@84c0 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x84c0 0x0 0x14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + /* Use xtal as baud rate clock source */ + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 574c3a2c77d5..e6b572409cf5 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,6 +9,7 @@ Optional properties: - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- fsl,dma-size : Indicate the size of the DMA buffer and its periods Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. @@ -28,4 +29,5 @@ uart1: serial@73fbc000 { interrupts = <31>; uart-has-rtscts; fsl,dte-mode; + fsl,dma-size = <1024 4>; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index c95005efbcb8..a1252a047f78 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -6,6 +6,8 @@ Required properties: on Vybrid vf610 SoC with 8-bit register organization - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated on LS1021A SoC with 32-bit big-endian register organization + - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated + on i.MX7ULP SoC with 32-bit little-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 0015c722be7b..b6cf384597e1 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -8,6 +8,8 @@ Required properties: * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6755-uart" for MT6755 compatible UARTS * "mediatek,mt6795-uart" for MT6795 compatible UARTS + * "mediatek,mt6797-uart" for MT6797 compatible UARTS + * "mediatek,mt7622-uart" for MT7622 compatible UARTS * "mediatek,mt7623-uart" for MT7623 compatible UARTS * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8135-uart" for MT8135 compatible UARTS diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt index f66037928f5f..40110e019620 100644 --- a/Documentation/devicetree/bindings/serial/slave-device.txt +++ b/Documentation/devicetree/bindings/serial/slave-device.txt @@ -21,6 +21,15 @@ Optional Properties: can support. For example, a particular board has some signal quality issue or the host processor can't support higher baud rates. +- current-speed : The current baud rate the device operates at. This should + only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no + way to reset the device + * device baud rate is configured by its firmware but + there is no way to request the actual settings Example: diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index 16fe94d7783c..b1d165b4d4b3 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -9,11 +9,14 @@ domain control. The driver implements the Generic PM domain bindings described in power/power_domain.txt. It provides the power domains defined in -include/dt-bindings/power/mt8173-power.h and mt2701-power.h. +- include/dt-bindings/power/mt8173-power.h +- include/dt-bindings/power/mt6797-power.h +- include/dt-bindings/power/mt2701-power.h Required properties: - compatible: Should be one of: - "mediatek,mt2701-scpsys" + - "mediatek,mt6797-scpsys" - "mediatek,mt8173-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit @@ -22,6 +25,7 @@ Required properties: These are clocks which hardware needs to be enabled before enabling certain power domains. Required clocks for MT2701: "mm", "mfg", "ethif" + Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" Optional properties: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt new file mode 100644 index 000000000000..50fc20c6ce91 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -0,0 +1,73 @@ +Qualcomm RPM GLINK binding + +This binding describes the Qualcomm RPM GLINK, a fifo based mechanism for +communication with the Resource Power Management system on various Qualcomm +platforms. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,glink-rpm" + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the IRQ used by the remote processor to + signal this processor about communication related events + +- qcom,rpm-msg-ram: + Usage: required + Value type: <prop-encoded-array> + Definition: handle to RPM message memory resource + +- mboxes: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the "rpm_hlos" mailbox in APCS, as described + in mailbox/mailbox.txt + += GLINK DEVICES +Each subnode of the GLINK node represent function tied to a virtual +communication channel. The name of the nodes are not important. The properties +of these nodes are defined by the individual bindings for the specific function +- but must contain the following property: + +- qcom,glink-channels: + Usage: required + Value type: <stringlist> + Definition: a list of channels tied to this function, used for matching + the function to a set of virtual channels + += EXAMPLE +The following example represents the GLINK RPM node on a MSM8996 device, with +the function for the "rpm_request" channel defined, which is used for +regualtors and root clocks. + + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x9820000 0x1000>; + + #mbox-cells = <1>; + }; + + rpm_msg_ram: memory@68000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x68000 0x6000>; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + mboxes = <&apcs_glb 0>; + + rpm-requests { + compatible = "qcom,rpm-msm8996"; + qcom,glink-channels = "rpm_requests"; + + ... + }; + }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt new file mode 100644 index 000000000000..6e6720aa33f1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -0,0 +1,129 @@ +Audio Graph Card: + +Audio Graph Card specifies audio DAI connections of SoC <-> codec. +It is based on common bindings for device graphs. +see ${LINUX}/Documentation/devicetree/bindings/graph.txt + +Basically, Audio Graph Card property is same as Simple Card. +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt + +Below are same as Simple-Card. + +- label +- widgets +- routing +- dai-format +- frame-master +- bitclock-master +- bitclock-inversion +- frame-inversion +- dai-tdm-slot-num +- dai-tdm-slot-width +- clocks / system-clock-frequency + +Required properties: + +- compatible : "audio-graph-card"; +- dais : list of CPU DAI port{s} + +Optional properties: +- pa-gpios: GPIO used to control external amplifier. + +Example: Single DAI case + + sound_card { + compatible = "audio-graph-card"; + + dais = <&cpu_port>; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + }; + + audio-codec { + ... + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; + +Example: Multi DAI case + + sound-card { + compatible = "audio-graph-card"; + + label = "sound-card"; + + dais = <&cpu_port0 + &cpu_port1 + &cpu_port2>; + }; + + audio-codec@0 { + ... + port { + codec0_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint0>; + }; + }; + }; + + audio-codec@1 { + ... + port { + codec1_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint1>; + }; + }; + }; + + audio-codec@2 { + ... + port { + codec2_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint2>; + }; + }; + }; + + dai-controller { + ... + ports { + cpu_port0: port@0 { + cpu_endpoint0: endpoint { + remote-endpoint = <&codec0_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + cpu_port1: port@1 { + cpu_endpoint1: endpoint { + remote-endpoint = <&codec1_endpoint>; + + dai-format = "i2s"; + ... + }; + }; + cpu_port2: port@2 { + cpu_endpoint2: endpoint { + remote-endpoint = <&codec2_endpoint>; + + dai-format = "i2s"; + ... + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt new file mode 100644 index 000000000000..8b8afe9fcb31 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -0,0 +1,122 @@ +Audio-Graph-SCU-Card: + +Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM". + +It is based on common bindings for device graphs. +see ${LINUX}/Documentation/devicetree/bindings/graph.txt + +Basically, Audio-Graph-SCU-Card property is same as +Simple-Card / Simple-SCU-Card / Audio-Graph-Card. +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt + ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt + ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt + +Below are same as Simple-Card / Audio-Graph-Card. + +- label +- dai-format +- frame-master +- bitclock-master +- bitclock-inversion +- frame-inversion +- dai-tdm-slot-num +- dai-tdm-slot-width +- clocks / system-clock-frequency + +Below are same as Simple-SCU-Card. + +- convert-rate +- convert-channels +- prefix +- routing + +Required properties: + +- compatible : "audio-graph-scu-card"; +- dais : list of CPU DAI port{s} + +Example 1. Sampling Rate Conversion + + sound_card { + compatible = "audio-graph-scu-card"; + + label = "sound-card"; + prefix = "codec"; + routing = "codec Playback", "DAI0 Playback", + "codec Playback", "DAI1 Playback"; + convert-rate = <48000>; + + dais = <&cpu_port>; + }; + + audio-codec { + ... + + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + }; + +Example 2. 2 CPU 1 Codec (Mixing) + + sound_card { + compatible = "audio-graph-scu-card"; + + label = "sound-card"; + prefix = "codec"; + routing = "codec Playback", "DAI0 Playback", + "codec Playback", "DAI1 Playback"; + convert-rate = <48000>; + + dais = <&cpu_port0 + &cpu_port1>; + }; + + audio-codec { + ... + + port { + codec_endpoint0: endpoint { + remote-endpoint = <&cpu_endpoint0>; + }; + codec_endpoint1: endpoint { + remote-endpoint = <&cpu_endpoint1>; + }; + }; + }; + + dai-controller { + ... + ports { + cpu_port0: port { + cpu_endpoint0: endpoint { + remote-endpoint = <&codec_endpoint0>; + + dai-format = "left_j"; + ... + }; + }; + cpu_port1: port { + cpu_endpoint1: endpoint { + remote-endpoint = <&codec_endpoint1>; + + dai-format = "left_j"; + ... + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt index 016b768bc722..77ee75c39233 100644 --- a/Documentation/devicetree/bindings/sound/cs35l35.txt +++ b/Documentation/devicetree/bindings/sound/cs35l35.txt @@ -16,6 +16,9 @@ Required properties: (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for further information relating to interrupt properties) + - cirrus,boost-ind-nanohenry: Inductor value for boost converter. The value is + in nH and they can be values of 1000nH, 1200nH, 1500nH, and 2200nH. + Optional properties: - reset-gpios : gpio used to reset the amplifier diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt index d3374231c871..2f5e973285a6 100644 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ b/Documentation/devicetree/bindings/sound/nau8825.txt @@ -69,6 +69,8 @@ Optional properties: - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + - nuvoton,crosstalk-bypass: make crosstalk function bypass if set. + - clocks: list of phandle and clock specifier pairs according to common clock bindings for the clocks described in clock-names - clock-names: should include "mclk" for the MCLK master clock @@ -96,6 +98,7 @@ Example: nuvoton,short-key-debounce = <2>; nuvoton,jack-insert-debounce = <7>; nuvoton,jack-eject-debounce = <7>; + nuvoton,crosstalk-bypass; clock-names = "mclk"; clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 15a7316e4c91..7246bb268bf9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ** Asynchronous mode ------------------ -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example) sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * SRC Asynchronous mode setting @@ -97,12 +97,12 @@ example) * Inputed 48kHz data will be converted to * system specified Hz */ - convert-rate = <48000>; + simple-audio-card,convert-rate = <48000>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -141,23 +141,23 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example) sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * CTU setting * All input data will be converted to 2ch * as output data */ - convert-channels = <2>; + simple-audio-card,convert-channels = <2>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -190,22 +190,22 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+ sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... - cpu@0 { + simple-audio-card,cpu@0 { sound-dai = <&rcar_sound 0>; }; - cpu@1 { + simple-audio-card,cpu@1 { sound-dai = <&rcar_sound 1>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -368,6 +368,10 @@ Required properties: see below for detail. - #sound-dai-cells : it must be 0 if your system is using single DAI it must be 1 if your system is using multi DAI +- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. +- clock-names : List of necessary clock names. + "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X", + "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i" Optional properties: - #clock-cells : it must be 0 if your system has audio_clkout @@ -375,6 +379,9 @@ Optional properties: - clock-frequency : for all audio_clkout0/1/2/3 - clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn is asynchronizes with lr-clock. +- resets : References to SSI resets. +- reset-names : List of valid reset names. + "ssi-all", "ssi.X" SSI subnode properties: - interrupts : Should contain SSI interrupt for PIO transfer diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt new file mode 100644 index 000000000000..921729de7346 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt @@ -0,0 +1,39 @@ +* Rockchip PDM controller + +Required properties: + +- compatible: "rockchip,pdm" +- reg: physical base address of the controller and length of memory mapped + region. +- dmas: DMA specifiers for rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should include "rx". +- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. +- clock-names: should contain following: + - "pdm_hclk": clock for PDM BUS + - "pdm_clk" : clock for PDM controller +- pinctrl-names: Must contain a "default" entry. +- pinctrl-N: One property must exist for each entry in + pinctrl-names. See ../pinctrl/pinctrl-bindings.txt + for details of the property values. + +Example for rk3328 PDM controller: + +pdm: pdm@ff040000 { + compatible = "rockchip,pdm"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&clk_pdm>, <&clk_gates28 0>; + clock-names = "pdm_clk", "pdm_hclk"; + dmas = <&pdma 16>; + #dma-cells = <1>; + dma-names = "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pdmm0_clk + &pdmm0_fsync + &pdmm0_sdi0 + &pdmm0_sdi1 + &pdmm0_sdi2 + &pdmm0_sdi3>; + pinctrl-1 = <&pdmm0_sleep>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 11046429a118..4706b96d450b 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -9,7 +9,9 @@ Required properties: - compatible: should be one of the following: - "rockchip,rk3066-spdif" - "rockchip,rk3188-spdif" + - "rockchip,rk3228-spdif" - "rockchip,rk3288-spdif" + - "rockchip,rk3328-spdif" - "rockchip,rk3366-spdif" - "rockchip,rk3368-spdif" - "rockchip,rk3399-spdif" diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.txt b/Documentation/devicetree/bindings/sound/samsung,odroid.txt index c1ac70cb0afb..c30934dd975b 100644 --- a/Documentation/devicetree/bindings/sound/samsung,odroid.txt +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.txt @@ -5,11 +5,6 @@ Required properties: - compatible - "samsung,odroidxu3-audio" - for Odroid XU3 board, "samsung,odroidxu4-audio" - for Odroid XU4 board - model - the user-visible name of this sound complex - - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S - controller - - 'codec' subnode with a 'sound-dai' property containing list of phandles - to the CODEC nodes, first entry must be corresponding to the MAX98090 - CODEC and the second entry must be the phandle of the HDMI IP block node - clocks - should contain entries matching clock names in the clock-names property - clock-names - should contain following entries: @@ -32,12 +27,18 @@ Required properties: For Odroid XU4: no entries +Required sub-nodes: + + - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S + controller + - 'codec' subnode with a 'sound-dai' property containing list of phandles + to the CODEC nodes, first entry must be corresponding to the MAX98090 + CODEC and the second entry must be the phandle of the HDMI IP block node + Example: sound { compatible = "samsung,odroidxu3-audio"; - samsung,cpu-dai = <&i2s0>; - samsung,codec-dai = <&max98090>; model = "Odroid-XU3"; samsung,audio-routing = "Headphone Jack", "HPL", diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt index d6fe47ed09af..327d229a51b2 100644 --- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -1,35 +1,29 @@ -ASoC simple SCU Sound Card +ASoC Simple SCU Sound Card -Simple-Card specifies audio DAI connections of SoC <-> codec. +Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM". +For example, you can use this driver if you want to exchange sampling rate convert, +Mixing, etc... Required properties: - compatible : "simple-scu-audio-card" "renesas,rsrc-card" - Optional properties: -- simple-audio-card,name : User specified audio sound card name, one string - property. -- simple-audio-card,cpu : CPU sub-node -- simple-audio-card,codec : CODEC sub-node +- simple-audio-card,name : see simple-audio-card.txt +- simple-audio-card,cpu : see simple-audio-card.txt +- simple-audio-card,codec : see simple-audio-card.txt Optional subnode properties: -- simple-audio-card,format : CPU/CODEC common audio format. - "i2s", "right_j", "left_j" , "dsp_a" - "dsp_b", "ac97", "pdm", "msb", "lsb" -- simple-audio-card,frame-master : Indicates dai-link frame master. - phandle to a cpu or codec subnode. -- simple-audio-card,bitclock-master : Indicates dai-link bit clock master. - phandle to a cpu or codec subnode. -- simple-audio-card,bitclock-inversion : bool property. Add this if the - dai-link uses bit clock inversion. -- simple-audio-card,frame-inversion : bool property. Add this if the - dai-link uses frame clock inversion. +- simple-audio-card,format : see simple-audio-card.txt +- simple-audio-card,frame-master : see simple-audio-card.txt +- simple-audio-card,bitclock-master : see simple-audio-card.txt +- simple-audio-card,bitclock-inversion : see simple-audio-card.txt +- simple-audio-card,frame-inversion : see simple-audio-card.txt - simple-audio-card,convert-rate : platform specified sampling rate convert - simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) -- simple-audio-card,prefix : see audio-routing +- simple-audio-card,prefix : see routing - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources. @@ -38,32 +32,23 @@ Optional subnode properties: Required CPU/CODEC subnodes properties: -- sound-dai : phandle and port of CPU/CODEC +- sound-dai : see simple-audio-card.txt Optional CPU/CODEC subnodes properties: -- clocks / system-clock-frequency : specify subnode's clock if needed. - it can be specified via "clocks" if system has - clock node (= common clock), or "system-clock-frequency" - (if system doens't support common clock) - If a clock is specified, it is - enabled with clk_prepare_enable() - in dai startup() and disabled with - clk_disable_unprepare() in dai - shutdown(). +- clocks / system-clock-frequency : see simple-audio-card.txt -Example 1. Sampling Rate Covert +Example 1. Sampling Rate Conversion sound { compatible = "simple-scu-audio-card"; simple-audio-card,name = "rsnd-ak4643"; simple-audio-card,format = "left_j"; - simple-audio-card,format = "left_j"; simple-audio-card,bitclock-master = <&sndcodec>; simple-audio-card,frame-master = <&sndcodec>; - simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */ + simple-audio-card,convert-rate = <48000>; simple-audio-card,prefix = "ak4642"; simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", @@ -79,20 +64,18 @@ sound { }; }; -Example 2. 2 CPU 1 Codec +Example 2. 2 CPU 1 Codec (Mixing) sound { - compatible = "renesas,rsrc-card"; - - card-name = "rsnd-ak4643"; - format = "left_j"; - bitclock-master = <&dpcmcpu>; - frame-master = <&dpcmcpu>; + compatible = "simple-scu-audio-card"; - convert-rate = <48000>; /* see audio_clk_a */ + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dpcmcpu>; + simple-audio-card,frame-master = <&dpcmcpu>; - audio-prefix = "ak4642"; - audio-routing = "ak4642 Playback", "DAI0 Playback", + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", "ak4642 Playback", "DAI1 Playback"; dpcmcpu: cpu@0 { diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt new file mode 100644 index 000000000000..4bda52042402 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt @@ -0,0 +1,62 @@ +STMicroelectronics STM32 SPI/I2S Controller + +The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode. +Only some SPI instances support I2S. + +Required properties: + - compatible: Must be "st,stm32h7-i2s" + - reg: Offset and length of the device's register set. + - interrupts: Must contain the interrupt line id. + - clocks: Must contain phandle and clock specifier pairs for each entry + in clock-names. + - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k". + "i2sclk": clock which feeds the internal clock generator + "pclk": clock which feeds the peripheral bus interface + "x8k": I2S parent clock for sampling rates multiple of 8kHz. + "x11k": I2S parent clock for sampling rates multiple of 11.025kHz. + - dmas: DMA specifiers for tx and rx dma. + See Documentation/devicetree/bindings/dma/stm32-dma.txt. + - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". + - pinctrl-names: should contain only value "default" + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + +Optional properties: + - resets: Reference to a reset controller asserting the reset controller + +The device node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in Documentation/devicetree/bindings/ +graph.txt. + +Example: +sound_card { + compatible = "audio-graph-card"; + dais = <&i2s2_port>; +}; + +i2s2: audio-controller@40003800 { + compatible = "st,stm32h7-i2s"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + dmas = <&dmamux2 2 39 0x400 0x1>, + <&dmamux2 3 40 0x400 0x1>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s2>; + + i2s2_port: port@0 { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + format = "i2s"; + }; + }; +}; + +audio-codec { + codec_port: port@0 { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index c59a3d779e06..f1c5ae59e7c9 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -6,7 +6,7 @@ The SAI contains two independent audio sub-blocks. Each sub-block has its own clock generator and I/O lines controller. Required properties: - - compatible: Should be "st,stm32f4-sai" + - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai" - reg: Base address and size of SAI common register set. - clocks: Must contain phandle and clock specifier pairs for each entry in clock-names. @@ -36,6 +36,10 @@ SAI subnodes required properties: - pinctrl-names: should contain only value "default" - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt +The device node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in Documentation/devicetree/bindings/ +graph.txt. + Example: sound_card { compatible = "audio-graph-card"; @@ -43,38 +47,29 @@ sound_card { }; sai1: sai1@40015800 { - compatible = "st,stm32f4-sai"; + compatible = "st,stm32h7-sai"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0x40015800 0x400>; reg = <0x40015800 0x4>; - clocks = <&rcc 1 CLK_SAIQ_PDIV>, <&rcc 1 CLK_I2SQ_PDIV>; + clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>; clock-names = "x8k", "x11k"; interrupts = <87>; - sai1b: audio-controller@40015824 { - #sound-dai-cells = <0>; - compatible = "st,stm32-sai-sub-b"; - reg = <0x40015824 0x1C>; - clocks = <&rcc 1 CLK_SAI2>; + sai1a: audio-controller@40015804 { + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1C>; + clocks = <&rcc SAI1_CK>; clock-names = "sai_ck"; - dmas = <&dma2 5 0 0x400 0x0>; + dmas = <&dmamux1 1 87 0x400 0x0>; dma-names = "tx"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai1b>; - - ports { - #address-cells = <1>; - #size-cells = <0>; + pinctrl-0 = <&pinctrl_sai1a>; - sai1b_port: port@0 { - reg = <0>; - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - audio-graph-card,format = "i2s"; - audio-graph-card,bitclock-master = <&codec_endpoint>; - audio-graph-card,frame-master = <&codec_endpoint>; - }; + sai1b_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + format = "i2s"; }; }; }; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt new file mode 100644 index 000000000000..33826f2459fa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt @@ -0,0 +1,56 @@ +STMicroelectronics STM32 S/PDIF receiver (SPDIFRX). + +The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with +IEC-60958 and IEC-61937. + +Required properties: + - compatible: should be "st,stm32h7-spdifrx" + - reg: cpu DAI IP base address and size + - clocks: must contain an entry for kclk (used as S/PDIF signal reference) + - clock-names: must contain "kclk" + - interrupts: cpu DAI interrupt line + - dmas: DMA specifiers for audio data DMA and iec control flow DMA + See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt + - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" + +Optional properties: + - resets: Reference to a reset controller asserting the SPDIFRX + +The device node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in Documentation/devicetree/bindings/ +graph.txt. + +Example: +spdifrx: spdifrx@40004000 { + compatible = "st,stm32h7-spdifrx"; + reg = <0x40004000 0x400>; + clocks = <&rcc SPDIFRX_CK>; + clock-names = "kclk"; + interrupts = <97>; + dmas = <&dmamux1 2 93 0x400 0x0>, + <&dmamux1 3 94 0x400 0x0>; + dma-names = "rx", "rx-ctrl"; + pinctrl-0 = <&spdifrx_pins>; + pinctrl-names = "default"; + + spdifrx_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + }; + }; +}; + +spdif_in: spdif-in { + compatible = "linux,spdif-dir"; + + codec_port: port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; +}; + +soundcard { + compatible = "audio-graph-card"; + dais = <&spdifrx_port>; +}; diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 3863531d1e6d..2d4e10deb6f4 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -7,6 +7,7 @@ Required properties: - "allwinner,sun7i-a20-codec" - "allwinner,sun8i-a23-codec" - "allwinner,sun8i-h3-codec" + - "allwinner,sun8i-v3s-codec" - reg: must contain the registers location and length - interrupts: must contain the codec interrupt - dmas: DMA channels for tx and rx dma. See the DMA client binding, @@ -25,6 +26,7 @@ Required properties for the following compatibles: - "allwinner,sun6i-a31-codec" - "allwinner,sun8i-a23-codec" - "allwinner,sun8i-h3-codec" + - "allwinner,sun8i-v3s-codec" - resets: phandle to the reset control for this device - allwinner,audio-routing: A list of the connections between audio components. Each entry is a pair of strings, the first being the @@ -34,15 +36,15 @@ Required properties for the following compatibles: Audio pins on the SoC: "HP" "HPCOM" - "LINEIN" - "LINEOUT" (not on sun8i-a23) + "LINEIN" (not on sun8i-v3s) + "LINEOUT" (not on sun8i-a23 or sun8i-v3s) "MIC1" - "MIC2" + "MIC2" (not on sun8i-v3s) "MIC3" (sun6i-a31 only) Microphone biases from the SoC: "HBIAS" - "MBIAS" + "MBIAS" (not on sun8i-v3s) Board connectors: "Headphone" @@ -55,6 +57,7 @@ Required properties for the following compatibles: Required properties for the following compatibles: - "allwinner,sun8i-a23-codec" - "allwinner,sun8i-h3-codec" + - "allwinner,sun8i-v3s-codec" - allwinner,codec-analog-controls: A phandle to the codec analog controls block in the PRCM. diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt index 779b735781ba..1b6e7c4e50ab 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt @@ -4,6 +4,7 @@ Required properties: - compatible: must be one of the following compatibles: - "allwinner,sun8i-a23-codec-analog" - "allwinner,sun8i-h3-codec-analog" + - "allwinner,sun8i-v3s-codec-analog" Required properties if not a sub-node of the PRCM node: - reg: must contain the registers location and length diff --git a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt new file mode 100644 index 000000000000..41bb1040eb71 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt @@ -0,0 +1,24 @@ +ZTE ZX AUD96P22 Audio Codec + +Required properties: + - compatible: Must be "zte,zx-aud96p22" + - #sound-dai-cells: Should be 0 + - reg: I2C bus slave address of AUD96P22 + +Example: + + i2c0: i2c@1486000 { + compatible = "zte,zx296718-i2c"; + reg = <0x01486000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&audiocrm AUDIO_I2C0_WCLK>; + clock-frequency = <1600000>; + + aud96p22: codec@22 { + compatible = "zte,zx-aud96p22"; + #sound-dai-cells = <0>; + reg = <0x22>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index dc975064fa27..64ee489571c4 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -38,6 +38,8 @@ Optional properties: specifiers, one for transmission, and one for reception. - dma-names : Must contain a list of two DMA names, "tx" and "rx". +- spi-slave : Empty property indicating the SPI controller is used + in slave mode. - renesas,dtdl : delay sync signal (setup) in transmit mode. Must contain one of the following values: 0 (no bit delay) diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index 4b1d6e74c744..1f6e86f787ef 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -1,17 +1,23 @@ SPI (Serial Peripheral Interface) busses -SPI busses can be described with a node for the SPI master device -and a set of child nodes for each SPI slave on the bus. For this -discussion, it is assumed that the system's SPI controller is in -SPI master mode. This binding does not describe SPI controllers -in slave mode. +SPI busses can be described with a node for the SPI controller device +and a set of child nodes for each SPI slave on the bus. The system's SPI +controller may be described for use in SPI master mode or in SPI slave mode, +but not for both at the same time. -The SPI master node requires the following properties: +The SPI controller node requires the following properties: +- compatible - Name of SPI bus controller following generic names + recommended practice. + +In master mode, the SPI controller node requires the following additional +properties: - #address-cells - number of cells required to define a chip select address on the SPI bus. - #size-cells - should be zero. -- compatible - name of SPI bus controller following generic names - recommended practice. + +In slave mode, the SPI controller node requires one additional property: +- spi-slave - Empty property. + No other properties are required in the SPI bus node. It is assumed that a driver for an SPI bus device will understand that it is an SPI bus. However, the binding does not attempt to define the specific method for @@ -21,7 +27,7 @@ assumption that board specific platform code will be used to manage chip selects. Individual drivers can define additional properties to support describing the chip select layout. -Optional properties: +Optional properties (master mode only): - cs-gpios - gpios chip select. - num-cs - total number of chipselects. @@ -41,28 +47,36 @@ cs1 : native cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 -SPI slave nodes must be children of the SPI master node and can -contain the following properties. -- reg - (required) chip select address of device. -- compatible - (required) name of SPI device following generic names - recommended practice. -- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz. -- spi-cpol - (optional) Empty property indicating device requires - inverse clock polarity (CPOL) mode. -- spi-cpha - (optional) Empty property indicating device requires - shifted clock phase (CPHA) mode. -- spi-cs-high - (optional) Empty property indicating device requires - chip select active high. -- spi-3wire - (optional) Empty property indicating device requires - 3-wire mode. -- spi-lsb-first - (optional) Empty property indicating device requires - LSB first mode. -- spi-tx-bus-width - (optional) The bus width (number of data wires) that is - used for MOSI. Defaults to 1 if not present. -- spi-rx-bus-width - (optional) The bus width (number of data wires) that is - used for MISO. Defaults to 1 if not present. -- spi-rx-delay-us - (optional) Microsecond delay after a read transfer. -- spi-tx-delay-us - (optional) Microsecond delay after a write transfer. + +SPI slave nodes must be children of the SPI controller node. + +In master mode, one or more slave nodes (up to the number of chip selects) can +be present. Required properties are: +- compatible - Name of SPI device following generic names recommended + practice. +- reg - Chip select address of device. +- spi-max-frequency - Maximum SPI clocking speed of device in Hz. + +In slave mode, the (single) slave node is optional. +If present, it must be called "slave". Required properties are: +- compatible - Name of SPI device following generic names recommended + practice. + +All slave nodes can contain the following optional properties: +- spi-cpol - Empty property indicating device requires inverse clock + polarity (CPOL) mode. +- spi-cpha - Empty property indicating device requires shifted clock + phase (CPHA) mode. +- spi-cs-high - Empty property indicating device requires chip select + active high. +- spi-3wire - Empty property indicating device requires 3-wire mode. +- spi-lsb-first - Empty property indicating device requires LSB first mode. +- spi-tx-bus-width - The bus width (number of data wires) that is used for MOSI. + Defaults to 1 if not present. +- spi-rx-bus-width - The bus width (number of data wires) that is used for MISO. + Defaults to 1 if not present. +- spi-rx-delay-us - Microsecond delay after a read transfer. +- spi-tx-delay-us - Microsecond delay after a write transfer. Some SPI controllers and devices support Dual and Quad SPI transfer mode. It allows data in the SPI system to be transferred using 2 wires (DUAL) or 4 diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt index dc6d0313324a..825c39cae74a 100644 --- a/Documentation/devicetree/bindings/spi/spi-meson.txt +++ b/Documentation/devicetree/bindings/spi/spi-meson.txt @@ -20,3 +20,34 @@ Required properties: #address-cells = <1>; #size-cells = <0>; }; + +* SPICC (SPI Communication Controller) + +The Meson SPICC is generic SPI controller for general purpose Full-Duplex +communications with dedicated 16 words RX/TX PIO FIFOs. + +Required properties: + - compatible: should be "amlogic,meson-gx-spicc" on Amlogic GX SoCs. + - reg: physical base address and length of the controller registers + - interrupts: The interrupt specifier + - clock-names: Must contain "core" + - clocks: phandle of the input clock for the baud rate generator + - #address-cells: should be 1 + - #size-cells: should be 0 + +Optional properties: + - resets: phandle of the internal reset line + +See ../spi/spi-bus.txt for more details on SPI bus master and slave devices +required and optional properties. + +Example : + spi@c1108d80 { + compatible = "amlogic,meson-gx-spicc"; + reg = <0xc1108d80 0x80>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core"; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index e43f4cf4cf35..e0318cf92d73 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -3,7 +3,9 @@ Binding for MTK SPI controller Required properties: - compatible: should be one of the following. - mediatek,mt2701-spi: for mt2701 platforms + - mediatek,mt2712-spi: for mt2712 platforms - mediatek,mt6589-spi: for mt6589 platforms + - mediatek,mt7622-spi: for mt7622 platforms - mediatek,mt8135-spi: for mt8135 platforms - mediatek,mt8173-spi: for mt8173 platforms diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt new file mode 100644 index 000000000000..1b3fa2c119d5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-stm32.txt @@ -0,0 +1,59 @@ +STMicroelectronics STM32 SPI Controller + +The STM32 SPI controller is used to communicate with external devices using +the Serial Peripheral Interface. It supports full-duplex, half-duplex and +simplex synchronous serial communication with external devices. It supports +from 4 to 32-bit data size. Although it can be configured as master or slave, +only master is supported by the driver. + +Required properties: +- compatible: Must be "st,stm32h7-spi". +- reg: Offset and length of the device's register set. +- interrupts: Must contain the interrupt id. +- clocks: Must contain an entry for spiclk (which feeds the internal clock + generator). +- #address-cells: Number of cells required to define a chip select address. +- #size-cells: Should be zero. + +Optional properties: +- resets: Must contain the phandle to the reset controller. +- A pinctrl state named "default" may be defined to set pins in mode of + operation for SPI transfer. +- dmas: DMA specifiers for tx and rx dma. DMA fifo mode must be used. See the + STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt. +- dma-names: DMA request names should include "tx" and "rx" if present. +- cs-gpios: list of GPIO chip selects. See the SPI bus bindings, + Documentation/devicetree/bindings/spi/spi-bus.txt + + +Child nodes represent devices on the SPI bus + See ../spi/spi-bus.txt + +Optional properties: +- st,spi-midi-ns: (Master Inter-Data Idleness) minimum time delay in + nanoseconds inserted between two consecutive data frames. + + +Example: + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc SPI2_CK>; + resets = <&rcc 1166>; + dmas = <&dmamux1 0 39 0x400 0x01>, + <&dmamux1 1 40 0x400 0x01>; + dma-names = "rx", "tx"; + pinctrl-0 = <&spi2_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 11 0>; + + aardvark@0 { + compatible = "totalphase,aardvark"; + reg = <0>; + spi-max-frequency = <4000000>; + st,spi-midi-ns = <4000>; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt index 68e047170039..68e047170039 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt diff --git a/Documentation/devicetree/bindings/timer/actions,owl-timer.txt b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt new file mode 100644 index 000000000000..e3c28da80cb2 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt @@ -0,0 +1,20 @@ +Actions Semi Owl Timer + +Required properties: +- compatible : "actions,s500-timer" for S500 + "actions,s900-timer" for S900 +- reg : Offset and length of the register set for the device. +- interrupts : Should contain the interrupts. +- interrupt-names : Valid names are: "2hz0", "2hz1", + "timer0", "timer1", "timer2", "timer3" + See ../resource-names.txt + +Example: + + timer@b0168000 { + compatible = "actions,s500-timer"; + reg = <0xb0168000 0x100>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer0", "timer1"; + }; diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt index b73ca6cd07f8..195792270414 100644 --- a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt @@ -7,7 +7,11 @@ Required properties: - compatible : Must be one of "faraday,fttmr010" - "cortina,gemini-timer" + "cortina,gemini-timer", "faraday,fttmr010" + "moxa,moxart-timer", "faraday,fttmr010" + "aspeed,ast2400-timer" + "aspeed,ast2500-timer" + - reg : Should contain registers location and length - interrupts : Should contain the three timer interrupts usually with flags for falling edge diff --git a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt deleted file mode 100644 index e207c11630af..000000000000 --- a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt +++ /dev/null @@ -1,19 +0,0 @@ -MOXA ART timer - -Required properties: - -- compatible : Must be one of: - - "moxa,moxart-timer" - - "aspeed,ast2400-timer" -- reg : Should contain registers location and length -- interrupts : Should contain the timer interrupt number -- clocks : Should contain phandle for the clock that drives the counter - -Example: - - timer: timer@98400000 { - compatible = "moxa,moxart-timer"; - reg = <0x98400000 0x42>; - interrupts = <19 1>; - clocks = <&coreclk>; - }; diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index 3e0a34c88e07..35f406dd86b6 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -55,6 +55,7 @@ gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor +isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index f658f394c2d3..52fb41046b34 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -45,6 +45,8 @@ Optional properties: a free-running PHY clock. - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power from P0 to P1/P2/P3 without delay. + - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check + during HS transmit. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index 9b4dbe3b2acc..78ebebb66dad 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -92,6 +92,8 @@ Required properties: parent's address space - clocks: Clock IDs array as required by the controller. - clock-names: names of clocks correseponding to IDs in the clock property + - vdd10-supply: 1.0V powr supply + - vdd33-supply: 3.0V/3.3V power supply Sub-nodes: The dwc3 core should be added as subnode to Exynos dwc3 glue. @@ -107,6 +109,8 @@ Example: #address-cells = <1>; #size-cells = <1>; ranges; + vdd10-supply = <&ldo11_reg>; + vdd33-supply = <&ldo9_reg>; dwc3 { compatible = "synopsys,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/iproc-udc.txt b/Documentation/devicetree/bindings/usb/iproc-udc.txt new file mode 100644 index 000000000000..272d7faf1a97 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/iproc-udc.txt @@ -0,0 +1,21 @@ +Broadcom IPROC USB Device controller. + +The device node is used for UDCs integrated into Broadcom's +iProc family (Northstar2, Cygnus) of SoCs'. The UDC is based +on Synopsys Designware Cores AHB Subsystem Device Controller +IP. + +Required properties: + - compatible: Add the compatibility strings for supported platforms. + For Broadcom NS2 platform, add "brcm,ns2-udc","brcm,iproc-udc". + For Broadcom Cygnus platform, add "brcm,cygnus-udc", "brcm,iproc-udc". + - reg: Offset and length of UDC register set + - interrupts: description of interrupt line + - phys: phandle to phy node. + +Example: + udc_dwc: usb@664e0000 { + compatible = "brcm,ns2-udc", "brcm,iproc-udc"; + reg = <0x664e0000 0x2000>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy>; diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index 9df456968596..e8766b08c93b 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -10,6 +10,7 @@ Optional properties: - big-endian-desc : boolean, set this for hcds with big-endian descriptors - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc - no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA +- remote-wakeup-connected: remote wakeup is wired on the platform - num-ports : u32, to override the detected port count - clocks : a list of phandle + clock specifier pairs - phys : phandle + phy specifier pair diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index c03d20140366..daf465bef758 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -5,6 +5,7 @@ using them to avoid name-space collisions. abcn Abracon Corporation abilis Abilis Systems +actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH adapteva Adapteva, Inc. @@ -28,6 +29,7 @@ andestech Andes Technology Corporation apm Applied Micro Circuits Corporation (APM) aptina Aptina Imaging arasan Arasan Chip Systems +arctic Arctic Sand aries Aries Embedded GmbH arm ARM Ltd. armadeus ARMadeus Systems SARL @@ -44,6 +46,7 @@ avia avia semiconductor avic Shanghai AVIC Optoelectronics Co., Ltd. axentia Axentia Technologies AB axis Axis Communications AB +bananapi BIPAI KEJI LIMITED boe BOE Technology Group Co., Ltd. bosch Bosch Sensortec GmbH boundary Boundary Devices Inc. @@ -158,6 +161,8 @@ iom Iomega Corporation isee ISEE 2007 S.L. isil Intersil issi Integrated Silicon Solutions Inc. +itead ITEAD Intelligent Systems Co.Ltd +iwave iWave Systems Technologies Pvt. Ltd. jdi Japan Display Inc. jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH @@ -165,6 +170,7 @@ keithkoep Keith & Koep GmbH keymile Keymile GmbH khadas Khadas kinetic Kinetic Technologies +kingnovel Kingnovel Technology Co., Ltd. kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation lacie LaCie @@ -172,8 +178,10 @@ lantiq Lantiq Semiconductor lego LEGO Systems A/S lenovo Lenovo Group Ltd. lg LG Corporation +libretech Shenzhen Libre Technology Co., Ltd licheepi Lichee Pi linaro Linaro Limited +linksys Belkin International, Inc. (Linksys) linux Linux-specific binding lltc Linear Technology Corporation lsi LSI Corp. (LSI Logic) @@ -219,6 +227,7 @@ nexbox Nexbox newhaven Newhaven Display International ni National Instruments nintendo Nintendo +nlt NLT Technologies, Ltd. nokia Nokia nordic Nordic Semiconductor nuvoton Nuvoton Technology Corporation @@ -266,8 +275,10 @@ renesas Renesas Electronics Corporation richtek Richtek Technology Corporation ricoh Ricoh Co. Ltd. rikomagic Rikomagic Tech Corp. Ltd +riscv RISC-V Foundation rockchip Fuzhou Rockchip Electronics Co., Ltd rohm ROHM Semiconductor Co., Ltd +roofull Shenzhen Roofull Technology Co, Ltd samsung Samsung Semiconductor samtec Samtec/Softing company sandisk Sandisk Corporation @@ -331,6 +342,7 @@ tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited tyan Tyan Computer Corporation +ucrobotics uCRobotics udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. @@ -356,6 +368,7 @@ xlnx Xilinx xunlong Shenzhen Xunlong Software CO.,Limited zarlink Zarlink Semiconductor zeitec ZEITEC Semiconductor Co., LTD. +zidoo Shenzhen Zidoo Technology Co., Ltd. zii Zodiac Inflight Innovations zte ZTE Corp. zyxel ZyXEL Communications Corp. diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt new file mode 100644 index 000000000000..b935b526d2f3 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt @@ -0,0 +1,23 @@ +* Dialog Semiconductor DA9062/61 Watchdog Timer + +Required properties: + +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-watchdog", "dlg,da9062-watchdog" + "dlg,da9062-watchdog" + +Example: DA9062 + + pmic0: da9062@58 { + watchdog { + compatible = "dlg,da9062-watchdog"; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver + + pmic0: da9061@58 { + watchdog { + compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog"; + }; + }; diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt index 08e16f684f2d..eb0914420c7c 100644 --- a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt @@ -10,6 +10,8 @@ Required Properties: Optional Properties: - interrupts : The interrupt used for the watchdog timeout warning. +- resets : phandle pointing to the system reset controller with + line index for the watchdog. Example: @@ -18,4 +20,5 @@ Example: reg = <0xffd02000 0x1000>; interrupts = <0 171 4>; clocks = <&per_base_clk>; + resets = <&rst WDT0_RESET>; }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt index da24e3133417..9e306afbbd49 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt @@ -2,10 +2,11 @@ Renesas Watchdog Timer (WDT) Controller Required properties: - compatible : Should be "renesas,<soctype>-wdt", and - "renesas,rcar-gen3-wdt" as fallback. + "renesas,rcar-gen3-wdt" or "renesas,rza-wdt" as fallback. Examples with soctypes are: - "renesas,r8a7795-wdt" (R-Car H3) - "renesas,r8a7796-wdt" (R-Car M3-W) + - "renesas,r7s72100-wdt" (RZ/A1) When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first, followed by the generic @@ -17,6 +18,7 @@ Required properties: Optional properties: - timeout-sec : Contains the watchdog timeout in seconds - power-domains : the power domain the WDT belongs to +- interrupts: Some WDTs have an interrupt when used in interval timer mode Examples: diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt new file mode 100644 index 000000000000..cc13b10a3f82 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt @@ -0,0 +1,19 @@ +STM32 Independent WatchDoG (IWDG) +--------------------------------- + +Required properties: +- compatible: "st,stm32-iwdg" +- reg: physical base address and length of the registers set for the device +- clocks: must contain a single entry describing the clock input + +Optional Properties: +- timeout-sec: Watchdog timeout value in seconds. + +Example: + +iwdg: watchdog@40003000 { + compatible = "st,stm32-iwdg"; + reg = <0x40003000 0x400>; + clocks = <&clk_lsi>; + timeout-sec = <32>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt b/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt new file mode 100644 index 000000000000..bf6337546dd1 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/uniphier-wdt.txt @@ -0,0 +1,20 @@ +UniPhier watchdog timer controller + +This UniPhier watchdog timer controller must be under sysctrl node. + +Required properties: +- compatible: should be "socionext,uniphier-wdt" + +Example: + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld11-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + watchdog { + compatible = "socionext,uniphier-wdt"; + } + + other nodes ... + }; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 280d283304bb..fb740445199f 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -1413,7 +1413,7 @@ Optional property: from DMA operations originating from the bus. It provides a means of defining a mapping or translation between the physical address space of the bus and the physical address space of the parent of the bus. - (for more information see ePAPR specification) + (for more information see the Devicetree Specification) * DMA Bus child Optional property: diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6ce9812..eb7f2685fda1 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -3,8 +3,7 @@ Device Tree Overlay Notes This document describes the implementation of the in-kernel device tree overlay functionality residing in drivers/of/overlay.c and is a -companion document to Documentation/devicetree/dt-object-internal.txt[1] & -Documentation/devicetree/dynamic-resolution-notes.txt[2] +companion document to Documentation/devicetree/dynamic-resolution-notes.txt[1] How overlays work ----------------- @@ -16,8 +15,7 @@ Since the kernel mainly deals with devices, any new device node that result in an active device should have it created while if the device node is either disabled or removed all together, the affected device should be deregistered. -Lets take an example where we have a foo board with the following base tree -which is taken from [1]. +Lets take an example where we have a foo board with the following base tree: ---- foo.dts ----------------------------------------------------------------- /* FOO platform */ @@ -36,7 +34,7 @@ which is taken from [1]. }; ---- foo.dts ----------------------------------------------------------------- -The overlay bar.dts, when loaded (and resolved as described in [2]) should +The overlay bar.dts, when loaded (and resolved as described in [1]) should ---- bar.dts ----------------------------------------------------------------- /plugin/; /* allow undefined label references and record them */ diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index 2b6b3d3f0388..33a8aaac02a8 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -387,7 +387,7 @@ static void __init harmony_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -"simple-bus" is defined in the ePAPR 1.0 specification as a property +"simple-bus" is defined in the Devicetree Specification as a property meaning a simple memory mapped bus, so the of_platform_populate() code could be written to just assume simple-bus compatible nodes will always be traversed. However, we pass it in as an argument so that |