diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
86 files changed, 2457 insertions, 761 deletions
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml index e14358bf0b9c..99b5e9530707 100644 --- a/Documentation/devicetree/bindings/arm/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/pmu.yaml @@ -49,9 +49,14 @@ properties: - arm,cortex-a77-pmu - arm,cortex-a78-pmu - arm,cortex-a510-pmu + - arm,cortex-a520-pmu - arm,cortex-a710-pmu + - arm,cortex-a715-pmu + - arm,cortex-a720-pmu - arm,cortex-x1-pmu - arm,cortex-x2-pmu + - arm,cortex-x3-pmu + - arm,cortex-x4-pmu - arm,neoverse-e1-pmu - arm,neoverse-n1-pmu - arm,neoverse-n2-pmu diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index a6b3bb8fdf33..c1d225fcf2d5 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -49,6 +49,7 @@ properties: - description: Frequency domain 0 register region - description: Frequency domain 1 register region - description: Frequency domain 2 register region + - description: Frequency domain 3 register region reg-names: minItems: 1 @@ -56,6 +57,7 @@ properties: - const: freq-domain0 - const: freq-domain1 - const: freq-domain2 + - const: freq-domain3 clocks: items: @@ -69,7 +71,7 @@ properties: interrupts: minItems: 1 - maxItems: 3 + maxItems: 4 interrupt-names: minItems: 1 @@ -77,6 +79,7 @@ properties: - const: dcvsh-irq-0 - const: dcvsh-irq-1 - const: dcvsh-irq-2 + - const: dcvsh-irq-3 '#freq-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt deleted file mode 100644 index 1758051798fe..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ /dev/null @@ -1,132 +0,0 @@ -TI CPUFreq and OPP bindings -================================ - -Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx -families support different OPPs depending on the silicon variant in use. -The ti-cpufreq driver can use revision and an efuse value from the SoC to -provide the OPP framework with supported hardware information. This is -used to determine which OPPs from the operating-points-v2 table get enabled -when it is parsed by the OPP framework. - -Required properties: --------------------- -In 'cpus' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, - omap34xx, omap36xx and am3517 SoCs -- syscon: A phandle pointing to a syscon node representing the control module - register space of the SoC. - -Optional properties: --------------------- -- "vdd-supply", "vbb-supply": to define two regulators for dra7xx -- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: Two bitfields indicating: - 1. Which revision of the SoC the OPP is supported by - 2. Which eFuse bits indicate this OPP is available - - A bitwise AND is performed against these values and if any bit - matches, the OPP gets enabled. - -Example: --------- - -/* From arch/arm/boot/dts/am33xx.dtsi */ -cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - - operating-points-v2 = <&cpu0_opp_table>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; -}; - -/* - * cpu0 has different OPPs depending on SoC revision and some on revisions - * 0x2 and 0x4 have eFuse bits that indicate if they are available or not - */ -cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - /* - * The three following nodes are marked with opp-suspend - * because they can not be enabled simultaneously on a - * single SoC. - */ - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100-275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; -}; diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index b767ec72a999..ac480765cde0 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -20,6 +20,7 @@ properties: - stericsson,ux500-hash - st,stm32f456-hash - st,stm32f756-hash + - st,stm32mp13-hash reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml new file mode 100644 index 000000000000..25b3198c4d3e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/adi,ds4520-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DS4520 I2C GPIO expander + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +properties: + compatible: + enum: + - adi,ds4520-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + ngpios: + minimum: 1 + maximum: 9 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - ngpios + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gpio@50 { + compatible = "adi,ds4520-gpio"; + reg = <0x50>; + ngpios = <9>; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt deleted file mode 100644 index 4a63bc96b687..000000000000 --- a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt +++ /dev/null @@ -1,52 +0,0 @@ -Broadcom Kona Family GPIO -========================= - -This GPIO driver is used in the following Broadcom SoCs: - BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 - -The Broadcom GPIO Controller IP can be configured prior to synthesis to -support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The -GPIO controller only supports edge, not level, triggering of interrupts. - -Required properties -------------------- - -- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio" -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends on the - number of GPIO banks on the SoC. The interrupts must be ordered by bank, - starting with bank 0. There is always a 1:1 mapping between banks and - IRQs. -- #gpio-cells: Should be <2>. The first cell is the pin number, the second - cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted) - See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. -- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The - second cell is used to specify flags. The following subset of flags is - supported: - - trigger type (bits[1:0]): - 1 = low-to-high edge triggered. - 2 = high-to-low edge triggered. - 3 = low-to-high or high-to-low edge triggered - Valid values are 1, 2, 3 - See also .../devicetree/bindings/interrupt-controller/interrupts.txt. -- gpio-controller: Marks the device node as a GPIO controller. -- interrupt-controller: Marks the device node as an interrupt controller. - -Example: - gpio: gpio@35003000 { - compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; - reg = <0x35003000 0x800>; - interrupts = - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml new file mode 100644 index 000000000000..296fdd6b8f38 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Kona family GPIO controller + +description: + The Broadcom GPIO Controller IP can be configured prior to synthesis to + support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The + GPIO controller only supports edge, not level, triggering of interrupts. + +maintainers: + - Ray Jui <rjui@broadcom.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm11351-gpio + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + - const: brcm,kona-gpio + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 6 + description: + The interrupt outputs from the controller. There is one GPIO interrupt + per GPIO bank. The number of interrupts listed depends on the number of + GPIO banks on the SoC. The interrupts must be ordered by bank, starting + with bank 0. There is always a 1:1 mapping between banks and IRQs. + + '#gpio-cells': + const: 2 + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + interrupt-controller: true + +required: + - compatible + - reg + - interrupts + - '#gpio-cells' + - '#interrupt-cells' + - gpio-controller + - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm11351-gpio + then: + properties: + interrupts: + minItems: 6 + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm21664-gpio + - brcm,bcm23550-gpio + then: + properties: + interrupts: + maxItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpio@35003000 { + compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; + reg = <0x35003000 0x800>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml index ae18603697d7..d0ca2af89f1e 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml @@ -32,10 +32,12 @@ properties: - fsl,imx6sx-gpio - fsl,imx6ul-gpio - fsl,imx7d-gpio + - fsl,imx8dxl-gpio - fsl,imx8mm-gpio - fsl,imx8mn-gpio - fsl,imx8mp-gpio - fsl,imx8mq-gpio + - fsl,imx8qm-gpio - fsl,imx8qxp-gpio - fsl,imxrt1050-gpio - fsl,imxrt1170-gpio diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index fa116148ee90..99febb8ea1b6 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -66,6 +66,7 @@ properties: - ti,tca6408 - ti,tca6416 - ti,tca6424 + - ti,tca9538 - ti,tca9539 - ti,tca9554 diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index b391cc1b4590..209f03bba0a7 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -61,6 +61,10 @@ patternProperties: '#gpio-cells': const: 2 + gpio-line-names: + minItems: 1 + maxItems: 32 + ngpios: default: 32 minimum: 1 diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml index 22c0cae73425..4555f1644a4d 100644 --- a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml @@ -28,6 +28,10 @@ properties: gpio-controller: true + gpio-line-names: + minItems: 1 + maxItems: 24 + interrupt-controller: true st,norequest-mask: diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index ae4f68d4e696..bd67cfee6d19 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -105,7 +105,7 @@ properties: G coefficient for temperature equation. Default for series 5 = 60000 Default for series 6 = 57400 - multipleOf: 1000 + multipleOf: 100 minimum: 1000 $ref: /schemas/types.yaml#/definitions/uint32 @@ -114,7 +114,7 @@ properties: H coefficient for temperature equation. Default for series 5 = 200000 Default for series 6 = 249400 - multipleOf: 1000 + multipleOf: 100 minimum: 1000 $ref: /schemas/types.yaml#/definitions/uint32 @@ -131,7 +131,7 @@ properties: J coefficient for temperature equation. Default for series 5 = -100 Default for series 6 = 0 - multipleOf: 1000 + multipleOf: 100 maximum: 0 $ref: /schemas/types.yaml#/definitions/int32 diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml index 72d2e910f206..2594fa192f93 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml @@ -216,7 +216,6 @@ properties: description: Whether to enable burnout current for EXT1. adi,ext1-burnout-current-nanoamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Burnout current in nanoamps to be applied to EXT1. enum: [0, 50, 500, 1000, 10000] @@ -233,7 +232,6 @@ properties: description: Whether to enable burnout current for EXT2. adi,ext2-burnout-current-nanoamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Burnout current in nanoamps to be applied to EXT2. enum: [0, 50, 500, 1000, 10000] default: 0 @@ -249,7 +247,6 @@ properties: description: Whether to enable burnout current for VIOUT. adi,viout-burnout-current-nanoamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Burnout current in nanoamps to be applied to VIOUT. enum: [0, 1000, 10000] default: 0 diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml index e84e4f33b358..3d06db98e978 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -35,6 +35,7 @@ properties: - amlogic,meson-sm1-gpio-intc - amlogic,meson-a1-gpio-intc - amlogic,meson-s4-gpio-intc + - amlogic,c3-gpio-intc - const: amlogic,meson-gpio-intc reg: diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml index a6c19a6cc99e..3e99801f77d2 100644 --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml @@ -160,6 +160,12 @@ properties: description: The MIO bank number in which the command and data lines are configured. + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + dependencies: '#clock-cells': [ clock-output-names ] diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 86c73fd825fd..58ae298cd2fc 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -269,7 +269,7 @@ properties: post-power-on-delay-ms: description: It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index 46eefdd19a2c..3fffa467e4e1 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -91,16 +91,6 @@ properties: should switch dat1 pin to GPIO mode. maxItems: 1 - assigned-clocks: - description: - PLL of the source clock. - maxItems: 1 - - assigned-clock-parents: - description: - parent of source clock, used for HS400 mode to get 400Mhz source clock. - maxItems: 1 - hs400-ds-delay: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt index 69edfd4d3922..a9fb0a91245f 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -5,11 +5,13 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-of-at91 driver. Required properties: -- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci" + or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci". - clocks: Phandlers to the clocks. - clock-names: Must be "hclock", "multclk", "baseclk" for "atmel,sama5d2-sdhci". Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". + Must be "hclock", "multclk" for "microchip,sam9x7-sdhci". Optional properties: - assigned-clocks: The same with "multclk". diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 56cbb42b5aea..eba2f3026ab0 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -19,12 +19,14 @@ properties: - qcom,qca2066-bt - qcom,qca6174-bt - qcom,qca9377-bt + - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt - qcom,wcn3998-bt - qcom,qca6390-bt - qcom,wcn6750-bt - qcom,wcn6855-bt + - qcom,wcn7850-bt enable-gpios: maxItems: 1 @@ -57,6 +59,9 @@ properties: vddaon-supply: description: VDD_AON supply regulator handle + vdddig-supply: + description: VDD_DIG supply regulator handle + vddbtcxmx-supply: description: VDD_BT_CXMX supply regulator handle @@ -72,6 +77,9 @@ properties: vddrfa1p2-supply: description: VDD_RFA_1P2 supply regulator handle + vddrfa1p9-supply: + description: VDD_RFA_1P9 supply regulator handle + vddrfa2p2-supply: description: VDD_RFA_2P2 supply regulator handle @@ -111,6 +119,7 @@ allOf: compatible: contains: enum: + - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt - qcom,wcn3998-bt @@ -155,6 +164,22 @@ allOf: - vddrfa0p8-supply - vddrfa1p2-supply - vddrfa1p7-supply + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn7850-bt + then: + required: + - enable-gpios + - swctrl-gpios + - vddio-supply + - vddaon-supply + - vdddig-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p9-supply examples: - | diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml new file mode 100644 index 000000000000..aa3162c74833 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom ASP 2.0 Ethernet controller + +maintainers: + - Justin Chen <justin.chen@broadcom.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: Broadcom Ethernet controller first introduced with 72165 + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm74165-asp + - const: brcm,asp-v2.1 + - items: + - enum: + - brcm,bcm72165-asp + - const: brcm,asp-v2.0 + + "#address-cells": + const: 1 + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + ranges: true + + interrupts: + minItems: 1 + items: + - description: RX/TX interrupt + - description: Port 0 Wake-on-LAN + - description: Port 1 Wake-on-LAN + + clocks: + maxItems: 1 + + ethernet-ports: + type: object + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-9]+$": + type: object + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + description: Port number + + brcm,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + ASP Channel Number + + The depacketizer channel that consumes packets from + the unimac/port. + + required: + - reg + - brcm,channel + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: brcm,unimac-mdio.yaml + + description: + ASP internal UniMAC MDIO bus + +required: + - compatible + - reg + - interrupts + - clocks + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@9c00000 { + compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0"; + reg = <0x9c00000 0x1fff14>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x0 0x9c00000 0x1fff14>; + clocks = <&scmi 14>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@c614 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xc614 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + mdio@ce14 { + compatible = "brcm,asp-v2.0-mdio"; + reg = <0xce14 0x8>; + reg-names = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + brcm,channel = <8>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + brcm,channel = <9>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml index 0be426ee1e44..6684810fcbf0 100644 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -22,6 +22,8 @@ properties: - brcm,genet-mdio-v3 - brcm,genet-mdio-v4 - brcm,genet-mdio-v5 + - brcm,asp-v2.0-mdio + - brcm,asp-v2.1-mdio - brcm,unimac-mdio reg: diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index 9c494957a07a..e42ea28d6ab4 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -21,6 +21,7 @@ properties: - const: allwinner,sun4i-a10-can - const: allwinner,sun4i-a10-can - const: allwinner,sun8i-r40-can + - const: allwinner,sun20i-d1-can reg: maxItems: 1 @@ -37,8 +38,9 @@ properties: if: properties: compatible: - contains: - const: allwinner,sun8i-r40-can + enum: + - allwinner,sun8i-r40-can + - allwinner,sun20i-d1-can then: required: diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 67879aab623b..bb518c831f7b 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -122,8 +122,6 @@ required: - compatible - reg - reg-names - - interrupts - - interrupt-names - clocks - clock-names - bosch,mram-cfg @@ -132,6 +130,7 @@ additionalProperties: false examples: - | + // Example with interrupts #include <dt-bindings/clock/imx6sx-clock.h> can@20e8000 { compatible = "bosch,m_can"; @@ -149,4 +148,21 @@ examples: }; }; + - | + // Example with timer polling + #include <dt-bindings/clock/imx6sx-clock.h> + can@20e8000 { + compatible = "bosch,m_can"; + reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; + reg-names = "m_can", "message_ram"; + clocks = <&clks IMX6SX_CLK_CANFD>, + <&clks IMX6SX_CLK_CANFD>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; + + can-transceiver { + max-bitrate = <5000000>; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index e3501bfa22e9..170e23f0610d 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller This file provides device node information for the TCAN4x5x interface contains. Required properties: - - compatible: "ti,tcan4x5x" + - compatible: + "ti,tcan4552", "ti,tcan4x5x" + "ti,tcan4553", "ti,tcan4x5x" or + "ti,tcan4x5x" - reg: 0 - #address-cells: 1 - #size-cells: 0 @@ -21,8 +24,10 @@ Optional properties: - reset-gpios: Hardwired output GPIO. If not defined then software reset. - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. + a sleep state or if the device is active. Not + available with tcan4552/4553. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not + available with tcan4552/4553. Example: tcan4x5x: tcan4x5x@0 { diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml index 897d2cbda45b..64d57c343e6f 100644 --- a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -46,6 +46,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: CAN Tx mailbox buffer count (CAN FD) + resets: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8d971813bab6..ec74a660beda 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -36,7 +36,7 @@ additionalProperties: true $defs: ethernet-ports: description: A DSA switch without any extra port properties - $ref: '#/' + $ref: '#' patternProperties: "^(ethernet-)?ports$": diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index 33726134f5c9..6ec0c181b6db 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -20,7 +20,7 @@ which is at a different MDIO base address in different switch families. 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 - "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6163, 6190, 6190X, 6191, 6290, 6390, 6390X + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X - "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: 6220, 6250 diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 6b0d359367da..9f6a5ccbcefe 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -66,6 +66,7 @@ properties: - mii - gmii - sgmii + - psgmii - qsgmii - qusgmii - tbi diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index acb2b2ac4fe1..e74502a0afe8 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -19,10 +19,12 @@ properties: enum: - mediatek,mt2701-eth - mediatek,mt7623-eth + - mediatek,mt7621-eth - mediatek,mt7622-eth - mediatek,mt7629-eth - mediatek,mt7981-eth - mediatek,mt7986-eth + - mediatek,mt7988-eth - ralink,rt5350-eth reg: @@ -32,7 +34,7 @@ properties: clock-names: true interrupts: - minItems: 3 + minItems: 1 maxItems: 4 power-domains: @@ -60,6 +62,12 @@ properties: Phandle to the mediatek hifsys controller used to provide various clocks and reset to the system. + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + mediatek,sgmiisys: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 @@ -121,6 +129,8 @@ allOf: - const: gp1 - const: gp2 + mediatek,infracfg: false + mediatek,pctl: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -135,6 +145,32 @@ allOf: properties: compatible: contains: + enum: + - mediatek,mt7621-eth + then: + properties: + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ethif + - const: fe + + mediatek,infracfg: false + + mediatek,wed: false + + mediatek,wed-pcie: false + + - if: + properties: + compatible: + contains: const: mediatek,mt7622-eth then: properties: @@ -159,6 +195,8 @@ allOf: - const: sgmii_ck - const: eth2pll + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 1 maxItems: 1 @@ -204,12 +242,6 @@ allOf: - const: sgmii_ck - const: eth2pll - mediatek,infracfg: - $ref: /schemas/types.yaml#/definitions/phandle - description: - Phandle to the syscon node that handles the path from GMAC to - PHY variants. - mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -250,6 +282,8 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -286,6 +320,67 @@ allOf: - const: netsys0 - const: netsys1 + mediatek,infracfg: false + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7988-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 34 + maxItems: 34 + + clock-names: + items: + - const: crypto + - const: fe + - const: gp2 + - const: gp1 + - const: gp3 + - const: ethwarp_wocpu2 + - const: ethwarp_wocpu1 + - const: ethwarp_wocpu0 + - const: esw + - const: netsys0 + - const: netsys1 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: top_usxgmii0_sel + - const: top_usxgmii1_sel + - const: top_sgm0_sel + - const: top_sgm1_sel + - const: top_xfi_phy0_xtal_sel + - const: top_xfi_phy1_xtal_sel + - const: top_eth_gmii_sel + - const: top_eth_refck_50m_sel + - const: top_eth_sys_200m_sel + - const: top_eth_sys_sel + - const: top_eth_xgmii_sel + - const: top_eth_mii_sel + - const: top_netsys_sel + - const: top_netsys_500m_sel + - const: top_netsys_pao_2x_sel + - const: top_netsys_sync_250m_sel + - const: top_netsys_ppefb_250m_sel + - const: top_netsys_warp_sel + - const: wocpu1 + - const: wocpu0 + - const: xgp1 + - const: xgp2 + - const: xgp3 + mediatek,sgmiisys: minItems: 2 maxItems: 2 @@ -293,7 +388,7 @@ allOf: patternProperties: "^mac@[0-1]$": type: object - additionalProperties: false + unevaluatedProperties: false allOf: - $ref: ethernet-controller.yaml# description: @@ -305,14 +400,9 @@ patternProperties: reg: maxItems: 1 - phy-handle: true - - phy-mode: true - required: - reg - compatible - - phy-handle required: - compatible diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml index 157e3bbcaf6f..26688e2302ea 100644 --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -52,6 +52,40 @@ properties: for a timer. type: boolean + motorcomm,rx-clk-drv-microamp: + description: | + drive strength of rx_clk rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + + motorcomm,rx-data-drv-microamp: + description: | + drive strength of rx_data/rx_ctl rgmii pad. + The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can + be configured with hardware pull-up resistors to match the SOC voltage + (usually 1.8V). + The software can read the registers to obtain the LDO voltage and configure + the legal drive strength(curren). + ===================================================== + | voltage | current Available (uA) | + | 1.8v | 1200 2100 2700 2910 3110 3600 3970 4350 | + | 3.3v | 3070 4080 4370 4680 5020 5450 5740 6140 | + ===================================================== + enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970, + 4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ] + default: 2910 + motorcomm,tx-clk-adj-enabled: description: | This configuration is mainly to adapt to VF2 with JH7110 SoC. diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt deleted file mode 100644 index 27db496f1ce8..000000000000 --- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Oxford Semiconductor OXNAS DWMAC Ethernet controller - -The device inherits all the properties of the dwmac/stmmac devices -described in the file stmmac.txt in the current directory with the -following changes. - -Required properties on all platforms: - -- compatible: For the OX820 SoC, it should be : - - "oxsemi,ox820-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - For the OX810SE SoC, it should be : - - "oxsemi,ox810se-dwmac" to select glue - - "snps,dwmac-3.512" to select IP version. - -- clocks: Should contain phandles to the following clocks -- clock-names: Should contain the following: - - "stmmaceth" for the host clock - see stmmac.txt - - "gmac" for the peripheral gate clock - -- oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Example : - -etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - -}; diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 161d28919316..3acd09f0da86 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -75,6 +75,7 @@ properties: description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false vddh-regulator: type: object @@ -82,6 +83,7 @@ properties: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 176ea5f90251..70bbc4220e2a 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -80,6 +80,7 @@ properties: "output" means GMAC provides the reference clock. $ref: /schemas/types.yaml#/definitions/string enum: [input, output] + default: input rockchip,grf: description: The phandle of the syscon node for the general register file. @@ -91,12 +92,18 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle tx_delay: - description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default. + description: Delay value for TXD timing. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x30 rx_delay: - description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default. + description: Delay value for RXD timing. $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x7F + default: 0x10 phy-supply: description: PHY regulator diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml new file mode 100644 index 000000000000..f5c22d6dcaee --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icss-iep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am642-icss-iep + - ti,j721e-icss-iep + - const: ti,am654-icss-iep + + - const: ti,am654-icss-iep + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the IEP source clock + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + /* AM65x */ + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml new file mode 100644 index 000000000000..311c570165f9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ICSSG PRUSS Ethernet + +maintainers: + - Md Danish Anwar <danishanwar@ti.com> + +description: + Ethernet based on the Programmable Real-Time Unit and Industrial + Communication Subsystem. + +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + +properties: + compatible: + enum: + - ti,am654-icssg-prueth # for AM65x SoC family + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MSMC SRAM node + + dmas: + maxItems: 10 + + dma-names: + items: + - const: tx0-0 + - const: tx0-1 + - const: tx0-2 + - const: tx0-3 + - const: tx1-0 + - const: tx1-1 + - const: tx1-2 + - const: tx1-3 + - const: rx0 + - const: rx1 + + ti,mii-g-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_G_RT module's syscon regmap. + + ti,mii-rt: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to MII_RT module's syscon regmap + + ti,iep: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + items: + maxItems: 1 + description: + phandle to IEP (Industrial Ethernet Peripheral) for ICSSG + + interrupts: + maxItems: 2 + description: + Interrupt specifiers to TX timestamp IRQ. + + interrupt-names: + items: + - const: tx_ts0 + - const: tx_ts1 + + ethernet-ports: + type: object + additionalProperties: false + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + ^port@[0-1]$: + type: object + description: ICSSG PRUETH external ports + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + items: + - enum: [0, 1] + description: ICSSG PRUETH port number + + interrupts: + maxItems: 1 + + ti,syscon-rgmii-delay: + items: + - items: + - description: phandle to system controller node + - description: The offset to ICSSG control register + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + phandle to system controller node and register offset + to ICSSG control register for RGMII transmit delay + + required: + - reg + anyOf: + - required: + - port@0 + - required: + - port@1 + +required: + - compatible + - sram + - dmas + - dma-names + - ethernet-ports + - ti,mii-g-rt + - interrupts + - interrupt-names + +unevaluatedProperties: false + +examples: + - | + /* Example k3-am654 base board SR2.0, dual-emac */ + pruss2_eth: ethernet { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg2_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>, + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>; + firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf", + "ti-pruss/am65x-rtu0-prueth-fw.elf", + "ti-pruss/am65x-txpru0-prueth-fw.elf", + "ti-pruss/am65x-pru1-prueth-fw.elf", + "ti-pruss/am65x-rtu1-prueth-fw.elf", + "ti-pruss/am65x-txpru1-prueth-fw.elf"; + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + dmas = <&main_udmap 0xc300>, /* egress slice 0 */ + <&main_udmap 0xc301>, /* egress slice 0 */ + <&main_udmap 0xc302>, /* egress slice 0 */ + <&main_udmap 0xc303>, /* egress slice 0 */ + <&main_udmap 0xc304>, /* egress slice 1 */ + <&main_udmap 0xc305>, /* egress slice 1 */ + <&main_udmap 0xc306>, /* egress slice 1 */ + <&main_udmap 0xc307>, /* egress slice 1 */ + <&main_udmap 0x4300>, /* ingress slice 0 */ + <&main_udmap 0x4301>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + ti,mii-g-rt = <&icssg2_mii_g_rt>; + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>; + interrupt-parent = <&icssg2_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + pruss2_emac0: port@0 { + reg = <0>; + phy-handle = <&pruss2_eth0_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 24>; + ti,syscon-rgmii-delay = <&scm_conf 0x4120>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + pruss2_emac1: port@1 { + reg = <1>; + phy-handle = <&pruss2_eth1_phy>; + phy-mode = "rgmii-id"; + interrupts-extended = <&icssg2_intc 25>; + ti,syscon-rgmii-delay = <&scm_conf 0x4124>; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 67b63f119f64..252207adbc54 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt76 - mediatek,mt7628-wmac - mediatek,mt7622-wmac + - mediatek,mt7981-wmac - mediatek,mt7986-wmac reg: @@ -71,6 +72,14 @@ properties: ieee80211-freq-limit: true + nvmem-cells: + items: + - description: NVMEM cell with EEPROM + + nvmem-cell-names: + items: + - const: eeprom + mediatek,eeprom-data: $ref: /schemas/types.yaml#/definitions/uint32-array description: @@ -84,6 +93,7 @@ properties: - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data + deprecated: true big-endian: $ref: /schemas/types.yaml#/definitions/flag @@ -258,7 +268,8 @@ examples: interrupt-parent = <&cpuintc>; interrupts = <6>; - mediatek,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&eeprom>; + nvmem-cell-names = "eeprom"; }; - | diff --git a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt deleted file mode 100644 index 038dda48b8e6..000000000000 --- a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt +++ /dev/null @@ -1,35 +0,0 @@ -XILINX GMIITORGMII Converter Driver Device Tree Bindings --------------------------------------------------------- - -The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media -Independent Interface (RGMII) core provides the RGMII between RGMII-compliant -Ethernet physical media devices (PHY) and the Gigabit Ethernet controller. -This core can be used in all three modes of operation(10/100/1000 Mb/s). -The Management Data Input/Output (MDIO) interface is used to configure the -Speed of operation. This core can switch dynamically between the three -Different speed modes by configuring the conveter register through mdio write. - -This converter sits between the ethernet MAC and the external phy. -MAC <==> GMII2RGMII <==> RGMII_PHY - -For more details about mdio please refer phy.txt file in the same directory. - -Required properties: -- compatible : Should be "xlnx,gmii-to-rgmii-1.0" -- reg : The ID number for the phy, usually a small integer -- phy-handle : Should point to the external phy device. - See ethernet.txt file in the same directory. - -Example: - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy: ethernet-phy@0 { - ...... - }; - gmiitorgmii: gmiitorgmii@8 { - compatible = "xlnx,gmii-to-rgmii-1.0"; - reg = <8>; - phy-handle = <&phy>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml new file mode 100644 index 000000000000..0f781dac6717 --- /dev/null +++ b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx GMII to RGMII Converter + +maintainers: + - Harini Katakam <harini.katakam@amd.com> + +description: + The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media + Independent Interface (RGMII) core provides the RGMII between RGMII-compliant + ethernet physical media devices (PHY) and the Gigabit Ethernet controller. + This core can be used in all three modes of operation(10/100/1000 Mb/s). + The Management Data Input/Output (MDIO) interface is used to configure the + speed of operation. This core can switch dynamically between the three + different speed modes by configuring the converter register through mdio write. + The core cannot function without an external phy connected to it. + +properties: + compatible: + const: xlnx,gmii-to-rgmii-1.0 + + reg: + minimum: 0 + maximum: 31 + description: The ID number for the phy. + + phy-handle: + $ref: ethernet-controller.yaml#/properties/phy-handle + +required: + - compatible + - reg + - phy-handle + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@0 { + reg = <0>; + }; + gmiitorgmii@8 { + compatible = "xlnx,gmii-to-rgmii-1.0"; + reg = <8>; + phy-handle = <&phy>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml new file mode 100644 index 000000000000..02d1d2c17129 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI CPU OPP (Operating Performance Points) + +description: + TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx + families, the CPU frequencies subset and the voltage value of each + OPP vary based on the silicon variant used. The data sheet sections + corresponding to "Operating Performance Points" describe the frequency + and voltage values based on device type and speed bin information + blown in corresponding eFuse bits as referred to by the Technical + Reference Manual. + + This document extends the operating-points-v2 binding by providing + the hardware description for the scheme mentioned above. + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2-ti-cpu + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + points to syscon node representing the control module + register space of the SoC. + + opp-shared: true + +patternProperties: + '^opp(-?[0-9]+)*$': + type: object + additionalProperties: false + + properties: + clock-latency-ns: true + opp-hz: true + opp-microvolt: true + opp-supported-hw: true + opp-suspend: true + turbo-mode: true + + required: + - opp-hz + - opp-supported-hw + +required: + - compatible + - syscon + +additionalProperties: false + +examples: + - | + opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 47e6f36b7637..e2f8f7af3cf4 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -56,7 +56,7 @@ patternProperties: need to be configured and that is left for the implementation specific binding. minItems: 1 - maxItems: 16 + maxItems: 32 items: maxItems: 1 diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml new file mode 100644 index 000000000000..693f22539606 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OMAP compatible OPP supply + +description: + OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse + registers, which contain OPP-specific voltage information tailored + for the specific device. This binding provides the information + needed to describe such a hardware values and relate them to program + the primary regulator during an OPP transition. + + Also, some supplies may have an associated vbb-supply, an Adaptive + Body Bias regulator, which must transition in a specific sequence + w.r.t the vdd-supply and clk when making an OPP transition. By + supplying two regulators to the device that will undergo OPP + transitions, we can use the multi-regulator support implemented by + the OPP core to describe both regulators the platform needs. The + OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml + provides further information (refer to Example 4 Handling multiple + regulators). + +maintainers: + - Nishanth Menon <nm@ti.com> + +properties: + $nodename: + pattern: '^opp-supply(@[0-9a-f]+)?$' + + compatible: + oneOf: + - description: Basic OPP supply controlling VDD and VBB + const: ti,omap-opp-supply + - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with + VBB. + const: ti,omap5-opp-supply + - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB + const: ti,omap5-core-opp-supply + + reg: + maxItems: 1 + + ti,absolute-max-voltage-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Absolute maximum voltage for the OPP supply in micro-volts. + minimum: 750000 + maximum: 1500000 + + ti,efuse-settings: + description: An array of u32 tuple items providing information about + optimized efuse configuration. + minItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Reference voltage in micro-volts (OPP Voltage) + minimum: 750000 + maximum: 1500000 + multipleOf: 10000 + - description: efuse offset where the optimized voltage is located + multipleOf: 4 + maximum: 256 + +required: + - compatible + - ti,absolute-max-voltage-uv + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,omap-opp-supply + then: + required: + - reg + - ti,efuse-settings + +additionalProperties: false + +examples: + - | + opp-supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + - | + opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = + /* uV offset */ + <1060000 0x0>, + <1160000 0x4>, + <1210000 0x8>; + ti,absolute-max-voltage-uv = <1500000>; + }; diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt deleted file mode 100644 index b70d326117cd..000000000000 --- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt +++ /dev/null @@ -1,63 +0,0 @@ -Texas Instruments OMAP compatible OPP supply description - -OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which -contain data that can be used to adjust voltages programmed for some of their -supplies for more efficient operation. This binding provides the information -needed to read these values and use them to program the main regulator during -an OPP transitions. - -Also, some supplies may have an associated vbb-supply which is an Adaptive Body -Bias regulator which much be transitioned in a specific sequence with regards -to the vdd-supply and clk when making an OPP transition. By supplying two -regulators to the device that will undergo OPP transitions we can make use -of the multi regulator binding that is part of the OPP core described here [1] -to describe both regulators needed by the platform. - -[1] Documentation/devicetree/bindings/opp/opp-v2.yaml - -Required Properties for Device Node: -- vdd-supply: phandle to regulator controlling VDD supply -- vbb-supply: phandle to regulator controlling Body Bias supply - (Usually Adaptive Body Bias regulator) - -Required Properties for opp-supply node: -- compatible: Should be one of: - "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB - "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD - along with VBB - "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD - but no VBB. -- reg: Address and length of the efuse register set for the device (mandatory - only for "ti,omap5-opp-supply") -- ti,efuse-settings: An array of u32 tuple items providing information about - optimized efuse configuration. Each item consists of the following: - volt: voltage in uV - reference voltage (OPP voltage) - efuse_offseet: efuse offset from reg where the optimized voltage is stored. -- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. - -Example: - -/* Device Node (CPU) */ -cpus { - cpu0: cpu@0 { - device_type = "cpu"; - - ... - - vdd-supply = <&vcc>; - vbb-supply = <&abb_mpu>; - }; -}; - -/* OMAP OPP Supply with Class0 registers */ -opp_supply_mpu: opp_supply@4a003b20 { - compatible = "ti,omap5-opp-supply"; - reg = <0x4a003b20 0x8>; - ti,efuse-settings = < - /* uV offset */ - 1060000 0x0 - 1160000 0x4 - 1210000 0x8 - >; - ti,absolute-max-voltage-uv = <1500000>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index e608a4f1bcae..e119a226a4b1 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -87,7 +87,7 @@ $defs: emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio, emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3, - gcc_gp4, gcc_gp5, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, + gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4, diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml index 3725348bb235..02f45b5834d0 100644 --- a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml @@ -28,75 +28,37 @@ properties: the VSEL pin is assumed to be low. type: boolean - regulators: - type: object - additionalProperties: false + inl1-supply: + description: Handle to the INL1 input supply (REG5-7) - properties: - REG1: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + inl2-supply: + description: Handle to the INL2 input supply (REG8-9) - properties: - vp1-supply: - description: Handle to the VP1 input supply + inl3-supply: + description: Handle to the INL3 input supply (REG10-12) - REG2: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp1-supply: + description: Handle to the VP1 input supply (REG1) - properties: - vp2-supply: - description: Handle to the VP2 input supply + vp2-supply: + description: Handle to the VP2 input supply (REG2) - REG3: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp3-supply: + description: Handle to the VP3 input supply (REG3) - properties: - vp3-supply: - description: Handle to the VP3 input supply - - REG4: - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false + vp4-supply: + description: Handle to the VP4 input supply (REG4) - properties: - vp4-supply: - description: Handle to the VP4 input supply + regulators: + type: object + additionalProperties: false patternProperties: - "^REG[5-7]$": + "^REG([1-9]|1[0-2])$": type: object $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false - properties: - inl1-supply: - description: Handle to the INL1 input supply - - "^REG[8-9]$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - properties: - inl2-supply: - description: Handle to the INL2 input supply - - "^REG1[0-2]$": - type: object - $ref: /schemas/regulator/regulator.yaml# - unevaluatedProperties: false - - properties: - inl3-supply: - description: Handle to the INL3 input supply - additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/regulator/adi,max77857.yaml b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml new file mode 100644 index 000000000000..d1fa74aca721 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/adi,max77857.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX77857 Buck-Boost Converter + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + - Okan Sahin <Okan.Sahin@analog.com> + +description: Analog Devices MAX77857 Buck-Boost Converter + +properties: + compatible: + enum: + - adi,max77831 + - adi,max77857 + - adi,max77859 + - adi,max77859a + + reg: + description: I2C address of the device + items: + - enum: [0x66, 0x67, 0x6E, 0x6F] + + interrupts: + maxItems: 1 + + adi,switch-frequency-hz: + description: Switching frequency of the Buck-Boost converter in Hz. + items: + - enum: [1200000, 1500000, 1800000, 2100000] + + adi,rtop-ohms: + description: Top feedback resistor value in ohms for external feedback. + minimum: 150000 + maximum: 330000 + + adi,rbot-ohms: + description: Bottom feedback resistor value in ohms for external feedback. + +dependencies: + adi,rtop-ohms: [ 'adi,rbot-ohms' ] + adi,rbot-ohms: [ 'adi,rtop-ohms' ] + +required: + - compatible + - reg + +allOf: + - $ref: regulator.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,max77831 + + then: + properties: + adi,switch-frequency-hz: + items: + enum: [1200000, 1500000, 1800000] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@66 { + reg = <0x66>; + compatible = "adi,max77857"; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + adi,rtop-ohms = <312000>; + adi,rbot-ohms = <12000>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file mode 100644 index 000000000000..c92a881ed60e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW37503 Voltage Regulator + +maintainers: + - Alec Li <like@awinic.com> + +description: + The AW37503 are dual voltage regulator, designed to support positive/negative + supply for driving TFT-LCD panels. It support software-configurable output + switching and monitoring. The output voltages can be programmed via an I2C + compatible interface. + +properties: + compatible: + const: awinic,aw37503 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single regulator. + + properties: + enable-gpios: + maxItems: 1 + description: + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + +required: + - compatible + - reg + - outp + - outn + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "awinic,aw37503"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + enable-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index dc626517c2ad..13b3f75f8e5e 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -95,11 +95,6 @@ properties: Properties for a single BUCK regulator properties: - regulator-name: - pattern: "^BUCK([1-2])$" - description: | - BUCK2 present in DA9122, DA9220, DA9131, DA9132 only - regulator-initial-mode: enum: [ 0, 1, 2, 3 ] description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h @@ -122,6 +117,23 @@ required: - reg - regulators +allOf: + - if: + properties: + compatible: + not: + contains: + enum: + - dlg,da9122 + - dlg,da9131 + - dlg,da9132 + - dlg,da9220 + then: + properties: + regulators: + properties: + buck2: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml new file mode 100644 index 000000000000..bad140418e49 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor SLG51000 Voltage Regulator + +maintainers: + - Eric Jeong <eric.jeong.opensource@diasemi.com> + - Support Opensource <support.opensource@diasemi.com> + +properties: + compatible: + const: dlg,slg51000 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dlg,cs-gpios: + maxItems: 1 + description: + GPIO for chip select + + vin3-supply: + description: + Input supply for ldo3, required if regulator is enabled + + vin4-supply: + description: + Input supply for ldo4, required if regulator is enabled + + vin5-supply: + description: + Input supply for ldo5, required if regulator is enabled + + vin6-supply: + description: + Input supply for ldo6, required if regulator is enabled + + vin7-supply: + description: + Input supply for ldo7, required if regulator is enabled + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^ldo[1-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + + required: + - regulator-name + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9121-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + vin5-supply = <&vreg_s1f_1p2>; + vin6-supply = <&vreg_s1f_1p2>; + + regulators { + ldo1 { + regulator-name = "slg51000_b_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "slg51000_b_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3 { + regulator-name = "slg51000_b_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo4 { + regulator-name = "slg51000_b_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + ldo5 { + regulator-name = "slg51000_b_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "slg51000_b_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "slg51000_b_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 2e720d152890..0221397eb51e 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -29,10 +29,12 @@ properties: patternProperties: "^buck[1-4]$": $ref: regulator.yaml# + unevaluatedProperties: false type: object "^ldo[1-4]$": $ref: regulator.yaml# + unevaluatedProperties: false type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index f3fcfc8be72f..6de5b027f990 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -21,7 +21,6 @@ properties: regulators: type: object - $ref: regulator.yaml# description: | list of regulators provided by this controller, must be named @@ -39,11 +38,13 @@ properties: ldortc: type: object $ref: regulator.yaml# + unevaluatedProperties: false patternProperties: "^ldo[1-4]$": type: object $ref: regulator.yaml# + unevaluatedProperties: false "^buck[1-4]$": type: object diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index e384e4953f0a..0eda44752cdd 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -68,18 +68,22 @@ properties: "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^vgen[1-6]$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^vldo[1-4]$": $ref: regulator.yaml# type: object + unevaluatedProperties: false "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$": $ref: regulator.yaml# type: object + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml index 8a08698e3484..b4eb4001eb3d 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml @@ -49,7 +49,7 @@ patternProperties: ".*-supply$": description: Input supply phandle(s) for this node - "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$": + "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$": description: List of regulators and its properties $ref: regulator.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index b9498504ad79..127a6f39b7f0 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -53,6 +53,7 @@ description: | For PMR735A, smps1 - smps3, ldo1 - ldo7 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 + For PMX75, smps1 - smps10, ldo1 - ldo21 properties: compatible: @@ -84,13 +85,14 @@ properties: - qcom,pmr735a-rpmh-regulators - qcom,pmx55-rpmh-regulators - qcom,pmx65-rpmh-regulators + - qcom,pmx75-rpmh-regulators qcom,pmic-id: description: | RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, g, h, k] + enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n] qcom,always-wait-for-ack: description: | @@ -109,6 +111,7 @@ properties: bob: type: object $ref: regulator.yaml# + unevaluatedProperties: false description: BOB regulator node. dependencies: regulator-allow-set-load: [ regulator-allowed-modes ] @@ -117,6 +120,7 @@ patternProperties: "^(smps|ldo|lvs|bob)[0-9]+$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: smps/ldo regulator nodes(s). dependencies: regulator-allow-set-load: [ regulator-allowed-modes ] @@ -424,10 +428,28 @@ allOf: vdd-l11-l13-supply: true patternProperties: "^vdd-l[1347]-supply$": true - "^vdd-l1[0245789]-supply$": true + "^vdd-l1[024579]-supply$": true "^vdd-l2[01]-supply$": true "^vdd-s[1-8]-supply$": true + - if: + properties: + compatible: + enum: + - qcom,pmx75-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l4-l16-supply: true + vdd-l5-l6-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + vdd-l20-l21-supply: true + patternProperties: + "^vdd-l[137]-supply$": true + "^vdd-l1[024579]-supply$": true + "^vdd-s([1-9]|10)-supply$": true + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml new file mode 100644 index 000000000000..f02f97d4fdd2 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,sdm845-refgen-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. REFGEN Regulator + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The REFGEN (reference voltage generator) regulator provides reference + voltage for on-chip IPs (like PHYs) on some Qualcomm SoCs. + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sc7180-refgen-regulator + - qcom,sc8180x-refgen-regulator + - qcom,sm8150-refgen-regulator + - const: qcom,sdm845-refgen-regulator + + - items: + - enum: + - qcom,sc7280-refgen-regulator + - qcom,sc8280xp-refgen-regulator + - qcom,sm6350-refgen-regulator + - qcom,sm6375-refgen-regulator + - qcom,sm8350-refgen-regulator + - const: qcom,sm8250-refgen-regulator + + - enum: + - qcom,sdm845-refgen-regulator + - qcom,sm8250-refgen-regulator + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + regulator@162f000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0162f000 0x84>; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index a8ca8e0b27f8..9ea8ac0786ac 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -110,6 +110,7 @@ patternProperties: "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$": description: List of regulators and its properties $ref: regulator.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml index d9c23333e157..cd06e957b9db 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml @@ -29,6 +29,7 @@ patternProperties: "^DSV(LCM|P|N)$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: Properties for single Display Bias Voltage regulator. diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml index 358297dd3fb7..e95e046e9ed6 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml @@ -21,6 +21,7 @@ allOf: properties: compatible: enum: + - richtek,rt5733 - richtek,rt5739 reg: diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml index 446ec5127d1f..fec3d396ca50 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -121,6 +121,7 @@ properties: description: load switch current regulator description. type: object $ref: regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml new file mode 100644 index 000000000000..609c06615bdc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ2208 SubPMIC Regulator + +maintainers: + - Alina Yu <alina_yu@richtek.com> + +description: | + RTQ2208 is a highly integrated power converter that offers functional safety dual + multi-configurable synchronous buck converters and two LDOs. + + Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted + switching operation in normal mode; the latter defines the operation in suspend to RAM mode. + + No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching + operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous + conduction mode (FCCM). + + The definition of modes is in the datasheet which is available in below link + and their meaning is:: + 0 - Auto mode for power saving, which reducing the switching frequency at light load condition + to maintain high frequency. + 1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency. + + Datasheet will be available soon at + https://www.richtek.com/assets/Products + +properties: + compatible: + enum: + - richtek,rtq2208 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,mtp-sel-high: + type: boolean + description: + vout register selection based on this boolean value. + false - Using DVS0 register setting to adjust vout + true - Using DVS1 register setting to adjust vout + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^buck-[a-h]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + description for buck-[a-h] regulator. + + properties: + regulator-allowed-modes: + description: + two buck modes in different switching accuracy. + 0 - Auto mode + 1 - FCCM + items: + enum: [0, 1] + + "^ldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + regulator description for ldo[1-2]. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@10 { + compatible = "richtek,rtq2208"; + reg = <0x10>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + richtek,mtp-sel-high; + + regulators { + buck-a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-c { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-d { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-e { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-f { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-g { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-h { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml index e6e5a9a7d940..ef62c618de67 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml @@ -35,6 +35,7 @@ properties: "^(p|n)avdd$": type: object $ref: regulator.yaml# + unevaluatedProperties: false description: | regulator description for pavdd and navdd. diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt deleted file mode 100644 index aa0733e49b90..000000000000 --- a/Documentation/devicetree/bindings/regulator/slg51000.txt +++ /dev/null @@ -1,88 +0,0 @@ -* Dialog Semiconductor SLG51000 Voltage Regulator - -Required properties: -- compatible : Should be "dlg,slg51000" for SLG51000 -- reg : Specifies the I2C slave address. -- xxx-supply: Input voltage supply regulator for ldo3 to ldo7. - These entries are required if regulators are enabled for a device. - An absence of these properties can cause the regulator registration to fail. - If some of input supply is powered through battery or always-on supply then - also it is required to have these parameters with proper node handle of always - on power supply. - vin3-supply: Input supply for ldo3 - vin4-supply: Input supply for ldo4 - vin5-supply: Input supply for ldo5 - vin6-supply: Input supply for ldo6 - vin7-supply: Input supply for ldo7 - -Optional properties: -- interrupt-parent : Specifies the reference to the interrupt controller. -- interrupts : IRQ line information. -- dlg,cs-gpios : Specify a valid GPIO for chip select - -Sub-nodes: -- regulators : This node defines the settings for the regulators. - The content of the sub-node is defined by the standard binding - for regulators; see regulator.txt. - - The SLG51000 regulators are bound using their names listed below: - ldo1 - ldo2 - ldo3 - ldo4 - ldo5 - ldo6 - ldo7 - -Optional properties for regulators: -- enable-gpios : Specify a valid GPIO for platform control of the regulator. - -Example: - pmic: slg51000@75 { - compatible = "dlg,slg51000"; - reg = <0x75>; - - regulators { - ldo1 { - regulator-name = "ldo1"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2 { - regulator-name = "ldo2"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - }; - - ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - - ldo5 { - regulator-name = "ldo5"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo6 { - regulator-name = "ldo6"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1200000>; - }; - - ldo7 { - regulator-name = "ldo7"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3750000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index 7d53cfa2c288..c9586d277f41 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -25,8 +25,8 @@ properties: patternProperties: "^(reg11|reg18|usb33)$": type: object - $ref: regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml index 011819c10988..11e378648b3f 100644 --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -29,11 +29,13 @@ properties: Initial data for the LDO1 regulator. $ref: regulator.yaml# type: object + unevaluatedProperties: false micvdd: description: Initial data for the MICVDD regulator. $ref: regulator.yaml# type: object + unevaluatedProperties: false additionalProperties: true diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml index 30b2131b5860..65cb2e5c5eee 100644 --- a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -16,7 +16,6 @@ properties: - enum: - atmel,at91rm9200-usart - atmel,at91sam9260-usart - - microchip,sam9x60-usart - items: - const: atmel,at91rm9200-dbgu - const: atmel,at91rm9200-usart @@ -24,6 +23,9 @@ properties: - const: atmel,at91sam9260-dbgu - const: atmel,at91sam9260-usart - items: + - const: microchip,sam9x60-usart + - const: atmel,at91sam9260-usart + - items: - const: microchip,sam9x60-dbgu - const: microchip,sam9x60-usart - const: atmel,at91sam9260-dbgu diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt deleted file mode 100644 index 87a6c375cd44..000000000000 --- a/Documentation/devicetree/bindings/serial/cavium-uart.txt +++ /dev/null @@ -1,19 +0,0 @@ -* Universal Asynchronous Receiver/Transmitter (UART) - -- compatible: "cavium,octeon-3860-uart" - - Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs. - -- reg: The base address of the UART register bank. - -- interrupts: A single interrupt specifier. - -- current-speed: Optional, the current bit rate in bits per second. - -Example: - uart1: serial@1180000000c00 { - compatible = "cavium,octeon-3860-uart","ns16550"; - reg = <0x11800 0x00000c00 0x0 0x400>; - current-speed = <115200>; - interrupts = <0 35>; - }; diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt deleted file mode 100644 index 04e23e63ee4f..000000000000 --- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt +++ /dev/null @@ -1,28 +0,0 @@ -* NXP LPC1850 UART - -Required properties: -- compatible : "nxp,lpc1850-uart", "ns16550a". -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clocks : phandle to the input clocks. -- clock-names : required elements: "uartclk", "reg". - -Optional properties: -- dmas : Two or more DMA channel specifiers following the - convention outlined in bindings/dma/dma.txt -- dma-names : Names for the dma channels, if present. There must - be at least one channel named "tx" for transmit - and named "rx" for receive. - -Since it's also possible to also use the of_serial.c driver all -parameters from 8250.txt also apply but are optional. - -Example: -uart0: serial@40081000 { - compatible = "nxp,lpc1850-uart", "ns16550a"; - reg = <0x40081000 0x1000>; - reg-shift = <2>; - interrupts = <24>; - clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; - clock-names = "uartclk", "reg"; -}; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml index 3de7b36829da..d3ce4de449d5 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml @@ -39,22 +39,4 @@ required: additionalProperties: false -examples: - - | - sound { - compatible = "audio-graph-card2"; - - links = <&cpu_port>; - }; - - cpu { - compatible = "cpu-driver"; - - cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; }; - }; - - codec { - compatible = "codec-driver"; - - port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; }; - }; +... diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml new file mode 100644 index 000000000000..7a6de938b11d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CS42L43 Audio CODEC + +maintainers: + - patches@opensource.cirrus.com + +description: | + The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface + (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed + for portable applications. It provides a high dynamic range, stereo + DAC for headphone output, two integrated Class D amplifiers for + loudspeakers, and two ADCs for wired headset microphone input or + stereo line input. PDM inputs are provided for digital microphones. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - cirrus,cs42l43 + + reg: + maxItems: 1 + + vdd-p-supply: + description: + Power supply for the high voltage interface. + + vdd-a-supply: + description: + Power supply for internal analog circuits. + + vdd-d-supply: + description: + Power supply for internal digital circuits. Can be internally supplied. + + vdd-io-supply: + description: + Power supply for external interface and internal digital logic. + + vdd-cp-supply: + description: + Power supply for the amplifier 3 and 4 charge pump. + + vdd-amp-supply: + description: + Power supply for amplifier 1 and 2. + + reset-gpios: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + clocks: + items: + - description: Synchronous audio clock provided on mclk_in. + + clock-names: + const: mclk + + cirrus,bias-low: + type: boolean + description: + Select a 1.8V headset micbias rather than 2.8V. + + cirrus,bias-sense-microamp: + description: + Current at which the headset micbias sense clamp will engage, 0 to + disable. + enum: [ 0, 14, 23, 41, 50, 60, 68, 86, 95 ] + default: 0 + + cirrus,bias-ramp-ms: + description: + Time in milliseconds the hardware allows for the headset micbias to + ramp up. + enum: [ 10, 40, 90, 170 ] + default: 170 + + cirrus,detect-us: + description: + Time in microseconds the type detection will run for. Long values will + cause more audible effects, but give more accurate detection. + enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ] + default: 10000 + + cirrus,button-automute: + type: boolean + description: + Enable the hardware automuting of decimator 1 when a headset button is + pressed. + + cirrus,buttons-ohms: + description: + Impedance in Ohms for each headset button, these should be listed in + ascending order. + minItems: 1 + maxItems: 6 + + cirrus,tip-debounce-ms: + description: + Software debounce on tip sense triggering in milliseconds. + default: 0 + + cirrus,tip-invert: + type: boolean + description: + Indicates tip detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,tip-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the tip detect should be disabled. + + cirrus,tip-fall-db-ms: + description: + Time in milliseconds a falling edge on the tip detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,tip-rise-db-ms: + description: + Time in milliseconds a rising edge on the tip detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,use-ring-sense: + type: boolean + description: + Indicates if the ring sense should be used. + + cirrus,ring-invert: + type: boolean + description: + Indicates ring detect polarity, inverted implies open-circuit whilst the + jack is inserted. + + cirrus,ring-disable-pullup: + type: boolean + description: + Indicates if the internal pullup on the ring detect should be disabled. + + cirrus,ring-fall-db-ms: + description: + Time in milliseconds a falling edge on the ring detect should be hardware + debounced for. Note the falling edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + cirrus,ring-rise-db-ms: + description: + Time in milliseconds a rising edge on the ring detect should be hardware + debounced for. Note the rising edge is considered after the invert. + enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ] + default: 500 + + pinctrl: + type: object + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + properties: + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 + + patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/cirrus-cs42l43-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/cirrus-cs42l43-state" + additionalProperties: false + + spi: + type: object + $ref: /schemas/spi/spi-controller.yaml# + unevaluatedProperties: false + +$defs: + cirrus-cs42l43-state: + type: object + + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + properties: + groups: + enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ] + + pins: + enum: [ gpio1, gpio2, gpio3, + asp_dout, asp_fsync, asp_bclk, + pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data, + i2c_sda, i2c_scl, + spi_miso, spi_sck, spi_ssb ] + + function: + enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ] + + drive-strength: + description: Set drive strength in mA + enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ] + + input-debounce: + description: Set input debounce in uS + enum: [ 0, 85 ] + +required: + - compatible + - reg + - vdd-p-supply + - vdd-a-supply + - vdd-io-supply + - vdd-cp-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cs42l43: codec@1a { + compatible = "cirrus,cs42l43"; + reg = <0x1a>; + + vdd-p-supply = <&vdd5v0>; + vdd-a-supply = <&vdd1v8>; + vdd-io-supply = <&vdd1v8>; + vdd-cp-supply = <&vdd1v8>; + vdd-amp-supply = <&vdd5v0>; + + reset-gpios = <&gpio 0>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio>; + interrupts = <56 IRQ_TYPE_LEVEL_LOW>; + + #sound-dai-cells = <1>; + + clocks = <&clks 0>; + clock-names = "mclk"; + + cs42l43_pins: pinctrl { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cs42l43_pins 0 0 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinsettings>; + + pinsettings: default-state { + shutter-pins { + groups = "gpio3"; + function = "mic-shutter"; + }; + }; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&cs42l43_pins 1 0>; + + sensor@0 { + compatible = "bosch,bme680"; + reg = <0>; + spi-max-frequency = <1400000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml index 666a95ac22c8..ba5b7728cf33 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Google SC7180-Trogdor ASoC sound card driver maintainers: - - Rohit kumar <rohitkr@codeaurora.org> + - Rohit kumar <quic_rohkumar@quicinc.com> - Cheng-Yi Chiang <cychiang@chromium.org> description: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml index 6cc8f86c7531..3a559bd07a79 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies Inc. LPASS CPU dai driver maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> - - Rohit kumar <rohitkr@codeaurora.org> + - Rohit kumar <quic_rohkumar@quicinc.com> description: | Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml new file mode 100644 index 000000000000..fa03cdd68e70 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6348/BCM6358 SPI controller + +maintainers: + - Jonas Gorski <jonas.gorski@gmail.com> + +description: | + Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband + SoCs. + + This controller has a limitation that can not keep the chip select line active + between the SPI transfers within the same SPI message. This can terminate the + transaction to some SPI devices prematurely. The issue can be worked around by + the controller's prepend mode. + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm6368-spi + - brcm,bcm6362-spi + - brcm,bcm63268-spi + - const: brcm,bcm6358-spi + - enum: + - brcm,bcm6348-spi + - brcm,bcm6358-spi + + reg: + maxItems: 1 + + clocks: + items: + - description: SPI master reference clock + + clock-names: + items: + - const: spi + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi@10000800 { + compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; + reg = <0x10000800 0x70c>; + interrupts = <1>; + clocks = <&clkctl 9>; + clock-names = "spi"; + num-cs = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 4f15f9a0cc34..cca81f89e252 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -86,7 +86,17 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: ref + - items: + - const: ref + - const: ahb + - const: apb cdns,fifo-depth: description: diff --git a/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml new file mode 100644 index 000000000000..de9d32feadf5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/loongson,ls2k-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SPI controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - loongson,ls2k1000-spi + - items: + - enum: + - loongson,ls2k0500-spi + - const: loongson,ls2k1000-spi + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + spi0: spi@1fff0220{ + compatible = "loongson,ls2k1000-spi"; + reg = <0x1fff0220 0x10>; + clocks = <&clk 17>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt deleted file mode 100644 index db8e0d71c5bc..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ /dev/null @@ -1,61 +0,0 @@ -NVIDIA Tegra114 SPI controller. - -Required properties: -- compatible : For Tegra114, must contain "nvidia,tegra114-spi". - Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where - <chip> is tegra124, tegra132, or tegra210. -- reg: Should contain SPI registers location and length. -- interrupts: Should contain SPI interrupts. -- clock-names : Must include the following entries: - - spi -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt -Optional properties: -- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device - with this tap value. This property is used to tune the outgoing data from - Tegra SPI master with respect to outgoing Tegra SPI master clock. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. -- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device - with this tap value. This property is used to adjust the Tegra SPI master - clock with respect to the data from the SPI slave device. - Tap values vary based on the platform design trace lengths from Tegra SPI - to corresponding slave devices. Valid tap values are from 0 thru 63. - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra114-spi"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - clock-names = "spi"; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; - <spi-client>@<bus_num> { - ... - ... - nvidia,rx-clk-tap-delay = <0>; - nvidia,tx-clk-tap-delay = <16>; - ... - }; - -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml new file mode 100644 index 000000000000..58222ffa53d7 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra114-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra114 SPI controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - const: nvidia,tegra114-spi + - items: + - enum: + - nvidia,tegra210-spi + - nvidia,tegra124-spi + - const: nvidia,tegra114-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SPI module clock + + clock-names: + items: + - const: spi + + resets: + items: + - description: SPI module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel for the reception FIFO + - description: DMA channel for the transmission FIFO + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + + spi-max-frequency = <25000000>; + + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + nvidia,rx-clk-tap-delay = <0>; + nvidia,tx-clk-tap-delay = <16>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt deleted file mode 100644 index c212491929b5..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20 SFLASH controller. - -Required properties: -- compatible : should be "nvidia,tegra20-sflash". -- reg: Should contain SFLASH registers location and length. -- interrupts: Should contain SFLASH interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000c380 { - compatible = "nvidia,tegra20-sflash"; - reg = <0x7000c380 0x80>; - interrupts = <0 39 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 43>; - resets = <&tegra_car 43>; - reset-names = "spi"; - dmas = <&apbdma 11>, <&apbdma 11>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml new file mode 100644 index 000000000000..e245bad85a25 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-sflash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 SFLASH controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,tegra20-sflash + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SPI>; + resets = <&tegra_car 43>; + reset-names = "spi"; + dmas = <&apbdma 11>, <&apbdma 11>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt deleted file mode 100644 index 40d80b93e327..000000000000 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt +++ /dev/null @@ -1,37 +0,0 @@ -NVIDIA Tegra20/Tegra30 SLINK controller. - -Required properties: -- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink". -- reg: Should contain SLINK registers location and length. -- interrupts: Should contain SLINK interrupts. -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - spi -- dmas : Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names : Must include the following entries: - - rx - - tx - -Recommended properties: -- spi-max-frequency: Definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - -spi@7000d600 { - compatible = "nvidia,tegra20-slink"; - reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - spi-max-frequency = <25000000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 44>; - resets = <&tegra_car 44>; - reset-names = "spi"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml new file mode 100644 index 000000000000..291c25ec015d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra20-slink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20/30 SLINK controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-slink + - nvidia,tegra30-slink + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: module clock + + resets: + items: + - description: module reset + + reset-names: + items: + - const: spi + + dmas: + items: + - description: DMA channel used for reception + - description: DMA channel used for transmission + + dma-names: + items: + - const: rx + - const: tx + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + + power-domains: + items: + - description: phandle to the core power domain + + spi-max-frequency: + description: Maximum SPI clocking speed of the controller in Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + +allOf: + - $ref: spi-controller.yaml + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - reset-names + - dmas + - dma-names + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA20_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt deleted file mode 100644 index 1c16f6692613..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-bcm63xx.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for Broadcom BCM6348/BCM6358 SPI controller - -Required properties: -- compatible: must contain one of "brcm,bcm6348-spi", "brcm,bcm6358-spi". -- reg: Base address and size of the controllers memory area. -- interrupts: Interrupt for the SPI block. -- clocks: phandle of the SPI clock. -- clock-names: has to be "spi". -- #address-cells: <1>, as required by generic SPI binding. -- #size-cells: <0>, also as required by generic SPI binding. - -Optional properties: -- num-cs: some controllers have less than 8 cs signals. Defaults to 8 - if absent. - -Child nodes as per the generic SPI binding. - -Example: - - spi@10000800 { - compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi"; - reg = <0x10000800 0x70c>; - - interrupts = <1>; - - clocks = <&clkctl 9>; - clock-names = "spi"; - - num-cs = <5>; - - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index b7552739b554..d4b61b0e8301 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -49,6 +49,12 @@ properties: enum: [ 0, 1 ] default: 0 + power-domains: + maxItems: 1 + + label: + description: Descriptive name of the SPI controller. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index e91425012319..727c5346b8ce 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -63,6 +63,9 @@ properties: maximum: 2 default: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml index a813c971ecf6..7fd591145480 100644 --- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml @@ -45,6 +45,9 @@ properties: - const: fspi_en - const: fspi + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 91e540a92faf..5e5a704a766e 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: spi-controller.yaml# + - $ref: /schemas/arm/primecell.yaml# # We need a select here so we don't match all nodes with 'arm,primecell' select: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index ba2bfb547909..40bc475ee7e1 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -119,6 +119,10 @@ properties: - fsl,mpr121 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2971 + - mps,mp2971 + # Monolithic Power Systems Inc. multi-phase controller mp2973 + - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 # Honeywell Humidicon HIH-6130 humidity/temperature sensor @@ -315,6 +319,8 @@ properties: - plx,pex8648 # Pulsedlight LIDAR range-finding sensor - pulsedlight,lidar-lite-v2 + # Renesas HS3001 Temperature and Relative Humidity Sensors + - renesas,hs3001 # Renesas ISL29501 time-of-flight sensor - renesas,isl29501 # Rohm DH2228FV diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml new file mode 100644 index 000000000000..81690d4b62a6 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-1 Watchdog Timer + +maintainers: + - Keguang Zhang <keguang.zhang@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - loongson,ls1b-wdt + - loongson,ls1c-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/loongson,ls1x-clk.h> + watchdog: watchdog@1fe5c060 { + compatible = "loongson,ls1b-wdt"; + reg = <0x1fe5c060 0xc>; + + clocks = <&clkc LS1X_CLKID_APB>; + }; |