diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 3 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt (renamed from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt) | 9 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt | 80 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt | 110 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 9 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt | 199 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt | 1 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt | 3 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt | 1 |
10 files changed, 402 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index b321b26780dc..9213b27e1036 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -17,7 +17,10 @@ Required properties: "allwinner,sun8i-a23-pinctrl" "allwinner,sun8i-a23-r-pinctrl" "allwinner,sun8i-a33-pinctrl" + "allwinner,sun9i-a80-pinctrl" + "allwinner,sun9i-a80-r-pinctrl" "allwinner,sun8i-a83t-pinctrl" + "allwinner,sun8i-h3-pinctrl" - reg: Should contain the register physical address and length for the pin controller. diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt index 16589fb6f420..e4277921f3e3 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt @@ -1,4 +1,4 @@ -Broadcom Cygnus GPIO/PINCONF Controller +Broadcom iProc GPIO/PINCONF Controller Required properties: @@ -7,9 +7,12 @@ Required properties: "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio" - reg: - Define the base and range of the I/O address space that contains the Cygnus + Define the base and range of the I/O address space that contains SoC GPIO/PINCONF controller registers +- ngpios: + Total number of in-use slots in GPIO controller + - #gpio-cells: Must be two. The first cell is the GPIO pin number (within the controller's pin space) and the second cell is used for the following: @@ -57,6 +60,7 @@ Example: compatible = "brcm,cygnus-ccm-gpio"; reg = <0x1800a000 0x50>, <0x0301d164 0x20>; + ngpios = <24>; #gpio-cells = <2>; gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -78,6 +82,7 @@ Example: gpio_asiu: gpio@180a5000 { compatible = "brcm,cygnus-asiu-gpio"; reg = <0x180a5000 0x668>; + ngpios = <146>; #gpio-cells = <2>; gpio-controller; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt new file mode 100644 index 000000000000..0844168a6dd4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt @@ -0,0 +1,80 @@ +Broadcom Northstar plus (NSP) GPIO/PINCONF Controller + +Required properties: +- compatible: + Must be "brcm,nsp-gpio-a" + +- reg: + Should contain the register physical address and length for each of + GPIO base, IO control registers + +- #gpio-cells: + Must be two. The first cell is the GPIO pin number (within the + controller's pin space) and the second cell is used for the following: + bit[0]: polarity (0 for active high and 1 for active low) + +- gpio-controller: + Specifies that the node is a GPIO controller + +- ngpios: + Number of gpios supported (58x25 supports 32 and 58x23 supports 24) + +Optional properties: +- interrupts: + Interrupt ID + +- interrupt-controller: + Specifies that the node is an interrupt controller + +- gpio-ranges: + Specifies the mapping between gpio controller and pin-controllers pins. + This requires 4 fields in cells defined as - + 1. Phandle of pin-controller. + 2. GPIO base pin offset. + 3 Pin-control base pin offset. + 4. number of gpio pins which are linearly mapped from pin base. + +Supported generic PINCONF properties in child nodes: +- pins: + The list of pins (within the controller's own pin space) that properties + in the node apply to. Pin names are "gpio-<pin>" + +- bias-disable: + Disable pin bias + +- bias-pull-up: + Enable internal pull up resistor + +- bias-pull-down: + Enable internal pull down resistor + +- drive-strength: + Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA) + +Example: + + gpioa: gpio@18000020 { + compatible = "brcm,nsp-gpio-a"; + reg = <0x18000020 0x100>, + <0x1803f1c4 0x1c>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <32>; + gpio-ranges = <&pinctrl 0 0 31>; + interrupt-controller; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&led>; + led: led { + pins = "gpio-1"; + bias-pull-up; + }; + + pwr: pwr { + gpio-hog; + gpios = <3 1>; + output-high; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt index e89b4677567d..8e5216bcd748 100644 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -1,7 +1,16 @@ Lantiq XWAY pinmux controller Required properties: -- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube") + "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or + "lantiq,xrx200-pinctrl") + "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl") + "lantiq,<chip>-pinctrl", where <chip> is: + "ase" (XWAY AMAZON Family) + "danube" (XWAY DANUBE Family) + "xrx100" (XWAY xRX100 Family) + "xrx200" (XWAY xRX200 Family) + "xrx300" (XWAY xRX300 Family) - reg: Should contain the physical address and length of the gpio/pinmux register range @@ -36,19 +45,87 @@ Required subnode-properties: Valid values for group and function names: +XWAY: (DEPRECATED: Use DANUBE) mux groups: exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, - spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, req3 - additional mux groups (XR9 only): - mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu + +XR9: ( DEPRECATED: Use xRX100/xRX200) + mux groups: + exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25, + ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, + nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, + asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy + +AMAZON: + mux groups: + exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, + spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0, + clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe + +DANUBE: + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1, + spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, + gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, + req1, req2, req3, dfe led0, dfe led1 functions: - spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe +xRX100: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, + clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, + dfe led0, dfe led1 + + functions: + spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe + +xRX200: + mux groups: + exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk, + ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd, + spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, + spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts, + usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di, + usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2, + stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, + gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1, + gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2 + + functions: + spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy + +xRX300: + mux groups: + exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle, + nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5, + nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do, + spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx, + usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2, + mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1 + + functions: + spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy Definition of pin configurations: @@ -62,15 +139,32 @@ Optional subnode-properties: 0: none, 1: down, 2: up. - lantiq,open-drain: Boolean, enables open-drain on the defined pin. -Valid values for XWAY pin names: +Valid values for XWAY pin names: (DEPRECATED: Use DANUBE) Pinconf pins can be referenced via the names io0-io31. -Valid values for XR9 pin names: +Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200) Pinconf pins can be referenced via the names io0-io55. +Valid values for AMAZON pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for DANUBE pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for xRX100 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Valid values for xRX200 pin names: + Pinconf pins can be referenced via the names io0-io49. + +Valid values for xRX300 pin names: + Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11, + io13-io19,io23-io27,io34-io36, + io42-io43,io48-io61. + Example: gpio: pinmux@E100B10 { - compatible = "lantiq,pinctrl-xway"; + compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 0480bc31bfd7..9ffb0b276bb4 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -4,10 +4,11 @@ The Mediatek's Pin controller is used to control SoC pins. Required properties: - compatible: value should be one of the following. - (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. - (b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. - (c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. - (d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. + "mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl. + "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. + "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. + "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. + "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. - gpio-controller : Marks the device node as a gpio controller. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt new file mode 100644 index 000000000000..e312a71b2f94 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -0,0 +1,199 @@ +Qualcomm MSM8996 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8996 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,msm8996-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio149 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, + sdc2_data sdc1_rclk + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, + cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, + pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, + qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, + qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, + atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, + atest_usb20, atest_char0, dac_calib10, qdss_stm10, + qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, + blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, + qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, + qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, + dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, + qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, + dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, + dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, + dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, + dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, + sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, + qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, + uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, + blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, + cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, + blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, + qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, + isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, + qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, + sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, + gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, + qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, + tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, + qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, + sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, + blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, + pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, + qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, + qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, + gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@01010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <0 208 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 1ae63c0acd40..a90c812ad642 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -14,6 +14,7 @@ PMIC's from Qualcomm. "qcom,pm8917-gpio" "qcom,pm8921-gpio" "qcom,pm8941-gpio" + "qcom,pm8994-gpio" "qcom,pma8084-gpio" - reg: @@ -79,6 +80,7 @@ to specify in a pin configuration subnode: gpio1-gpio38 for pm8917 gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 + gpio1-gpio22 for pm8994 gpio1-gpio22 for pma8084 - function: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index d7803a2a94e9..d74e631e10da 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -15,6 +15,7 @@ of PMIC's from Qualcomm. "qcom,pm8917-mpp", "qcom,pm8921-mpp", "qcom,pm8941-mpp", + "qcom,pm8994-mpp", "qcom,pma8084-mpp", - reg: diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 391ef4be8d50..0cd701b1947f 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -21,7 +21,8 @@ defined as gpio sub-nodes of the pinmux controller. Required properties for iomux controller: - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl" "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl" - "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl" + "rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl" + "rockchip,rk3368-pinctrl" - rockchip,grf: phandle referencing a syscon providing the "general register files" diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 9d2a995293e6..6db16b90873a 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -17,6 +17,7 @@ Required Properties: - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller. - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller. + - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller. - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller. - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller. |