diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/faraday,ftpci100.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/faraday,ftpci100.txt | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt new file mode 100644 index 000000000000..35d4a979bb7b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt @@ -0,0 +1,129 @@ +Faraday Technology FTPCI100 PCI Host Bridge + +This PCI bridge is found inside that Cortina Systems Gemini SoC platform and +is a generic IP block from Faraday Technology. It exists in two variants: +plain and dual PCI. The plain version embeds a cascading interrupt controller +into the host bridge. The dual version routes the interrupts to the host +chips interrupt controller. + +The host controller appear on the PCI bus with vendor ID 0x159b (Faraday +Technology) and product ID 0x4321. + +Mandatory properties: + +- compatible: ranging from specific to generic, should be one of + "cortina,gemini-pci", "faraday,ftpci100" + "cortina,gemini-pci-dual", "faraday,ftpci100-dual" + "faraday,ftpci100" + "faraday,ftpci100-dual" +- reg: memory base and size for the host bridge +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- bus-range: set to <0x00 0xff> +- device_type, set to "pci" +- ranges: see pci.txt +- interrupt-map-mask: see pci.txt +- interrupt-map: see pci.txt +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, + 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as + pre-fetchable. + +Mandatory subnodes: +- For "faraday,ftpci100" a node representing the interrupt-controller inside the + host bridge is mandatory. It has the following mandatory properties: + - interrupt: see interrupt-controller/interrupts.txt + - interrupt-parent: see interrupt-controller/interrupts.txt + - interrupt-controller: see interrupt-controller/interrupts.txt + - #address-cells: set to <0> + - #interrupt-cells: set to <1> + +I/O space considerations: + +The plain variant has 128MiB of non-prefetchable memory space, whereas the +"dual" variant has 64MiB. Take this into account when describing the ranges. + +Interrupt map considerations: + +The "dual" variant will get INT A, B, C, D from the system interrupt controller +and should point to respective interrupt in that controller in its +interrupt-map. + +The code which is the only documentation of how the Faraday PCI (the non-dual +variant) interrupts assigns the default interrupt mapping/swizzling has +typically been like this, doing the swizzling on the interrupt controller side +rather than in the interconnect: + +interrupt-map-mask = <0xf800 0 0 7>; +interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + +Example: + +pci@50000000 { + compatible = "cortina,gemini-pci", "faraday,ftpci100"; + reg = <0x50000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */ + <26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */ + <27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */ + <28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */ + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bus-range = <0x00 0xff>; + ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ + <0x01000000 0 0 0x50000000 0 0x00100000>, + /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ + <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; + + /* DMA ranges */ + dma-ranges = + /* 128MiB at 0x00000000-0x07ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 0>, + <0x6000 0 0 4 &pci_intc 0>; + pci_intc: interrupt-controller { + interrupt-parent = <&intcon>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; +}; |