diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ata')
3 files changed, 50 insertions, 9 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml index 94d72aeaad0f..7fdf40954a4c 100644 --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml @@ -59,7 +59,7 @@ properties: const: sata-phy hba-cap: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: Bitfield of the HBA generic platform capabilities like Staggered Spin-up or Mechanical Presence Switch support. It can be used to @@ -67,7 +67,7 @@ properties: in case if the system firmware hasn't done it. ports-implemented: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: Mask that indicates which ports the HBA supports. Useful if PI is not programmed by the BIOS, which is true for some embedded SoC's. @@ -110,7 +110,7 @@ $defs: description: Power regulator for SATA port target device hba-port-cap: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: Bitfield of the HBA port-specific platform capabilities like Hot plugging, eSATA, FIS-based Switching, etc (see AHCI specification diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml index 7dc2a2e8f598..358617115bb8 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml @@ -30,12 +30,12 @@ select: - marvell,armada-3700-ahci - marvell,armada-8k-ahci - marvell,berlin2q-ahci + - socionext,uniphier-pro4-ahci + - socionext,uniphier-pxs2-ahci + - socionext,uniphier-pxs3-ahci required: - compatible -allOf: - - $ref: "ahci-common.yaml#" - properties: compatible: oneOf: @@ -45,6 +45,9 @@ properties: - marvell,armada-8k-ahci - marvell,berlin2-ahci - marvell,berlin2q-ahci + - socionext,uniphier-pro4-ahci + - socionext,uniphier-pxs2-ahci + - socionext,uniphier-pxs3-ahci - const: generic-ahci - enum: - cavium,octeon-7130-ahci @@ -74,7 +77,8 @@ properties: maxItems: 1 resets: - maxItems: 1 + minItems: 1 + maxItems: 3 patternProperties: "^sata-port@[0-9a-f]+$": @@ -91,6 +95,43 @@ required: - reg - interrupts +allOf: + - $ref: ahci-common.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ahci + then: + properties: + resets: + items: + - description: reset line for the parent + - description: reset line for the glue logic + - description: reset line for the controller + required: + - resets + else: + if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pxs2-ahci + - socionext,uniphier-pxs3-ahci + then: + properties: + resets: + items: + - description: reset for the glue logic + - description: reset for the controller + required: + - resets + else: + properties: + resets: + maxItems: 1 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml index c4e4a9eab658..fe0909554790 100644 --- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml +++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas R-Car Serial-ATA Interface |