diff options
Diffstat (limited to 'Documentation/accounting')
| -rw-r--r-- | Documentation/accounting/psi.txt | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/Documentation/accounting/psi.txt b/Documentation/accounting/psi.txt index 7e71c9c1d8e9..5cbe5659e3b7 100644 --- a/Documentation/accounting/psi.txt +++ b/Documentation/accounting/psi.txt @@ -63,6 +63,110 @@ as well as medium and long term trends. The total absolute stall time spikes which wouldn't necessarily make a dent in the time averages, or to average trends over custom time frames. +Monitoring for pressure thresholds +================================== + +Users can register triggers and use poll() to be woken up when resource +pressure exceeds certain thresholds. + +A trigger describes the maximum cumulative stall time over a specific +time window, e.g. 100ms of total stall time within any 500ms window to +generate a wakeup event. + +To register a trigger user has to open psi interface file under +/proc/pressure/ representing the resource to be monitored and write the +desired threshold and time window. The open file descriptor should be +used to wait for trigger events using select(), poll() or epoll(). +The following format is used: + +<some|full> <stall amount in us> <time window in us> + +For example writing "some 150000 1000000" into /proc/pressure/memory +would add 150ms threshold for partial memory stall measured within +1sec time window. Writing "full 50000 1000000" into /proc/pressure/io +would add 50ms threshold for full io stall measured within 1sec time window. + +Triggers can be set on more than one psi metric and more than one trigger +for the same psi metric can be specified. However for each trigger a separate +file descriptor is required to be able to poll it separately from others, +therefore for each trigger a separate open() syscall should be made even +when opening the same psi interface file. + +Monitors activate only when system enters stall state for the monitored +psi metric and deactivates upon exit from the stall state. While system is +in the stall state psi signal growth is monitored at a rate of 10 times per +tracking window. + +The kernel accepts window sizes ranging from 500ms to 10s, therefore min +monitoring update interval is 50ms and max is 1s. Min limit is set to +prevent overly frequent polling. Max limit is chosen as a high enough number +after which monitors are most likely not needed and psi averages can be used +instead. + +When activated, psi monitor stays active for at least the duration of one +tracking window to avoid repeated activations/deactivations when system is +bouncing in and out of the stall state. + +Notifications to the userspace are rate-limited to one per tracking window. + +The trigger will de-register when the file descriptor used to define the +trigger is closed. + +Userspace monitor usage example +=============================== + +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <poll.h> +#include <string.h> +#include <unistd.h> + +/* + * Monitor memory partial stall with 1s tracking window size + * and 150ms threshold. + */ +int main() { + const char trig[] = "some 150000 1000000"; + struct pollfd fds; + int n; + + fds.fd = open("/proc/pressure/memory", O_RDWR | O_NONBLOCK); + if (fds.fd < 0) { + printf("/proc/pressure/memory open error: %s\n", + strerror(errno)); + return 1; + } + fds.events = POLLPRI; + + if (write(fds.fd, trig, strlen(trig) + 1) < 0) { + printf("/proc/pressure/memory write error: %s\n", + strerror(errno)); + return 1; + } + + printf("waiting for events...\n"); + while (1) { + n = poll(&fds, 1, -1); + if (n < 0) { + printf("poll error: %s\n", strerror(errno)); + return 1; + } + if (fds.revents & POLLERR) { + printf("got POLLERR, event source is gone\n"); + return 0; + } + if (fds.revents & POLLPRI) { + printf("event triggered!\n"); + } else { + printf("unknown event received: 0x%x\n", fds.revents); + return 1; + } + } + + return 0; +} + Cgroup2 interface ================= @@ -71,3 +175,6 @@ mounted, pressure stall information is also tracked for tasks grouped into cgroups. Each subdirectory in the cgroupfs mountpoint contains cpu.pressure, memory.pressure, and io.pressure files; the format is the same as the /proc/pressure/ files. + +Per-cgroup psi monitors can be specified and used the same way as +system-wide ones. |