summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/serial/Kconfig9
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/xr_serial.c595
3 files changed, 605 insertions, 0 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a21ff5ab6df9..de5c01257060 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -633,6 +633,15 @@ config USB_SERIAL_UPD78F0730
To compile this driver as a module, choose M here: the
module will be called upd78f0730.
+config USB_SERIAL_XR
+ tristate "USB MaxLinear/Exar USB to Serial driver"
+ help
+ Say Y here if you want to use MaxLinear/Exar USB to Serial converter
+ devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xr_serial.
+
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 50c53aed787a..c7bb1a88173e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -61,4 +61,5 @@ obj-$(CONFIG_USB_SERIAL_UPD78F0730) += upd78f0730.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
+obj-$(CONFIG_USB_SERIAL_XR) += xr_serial.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
new file mode 100644
index 000000000000..bdb2df27b50b
--- /dev/null
+++ b/drivers/usb/serial/xr_serial.c
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MaxLinear/Exar USB to Serial driver
+ *
+ * Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org>
+ *
+ * Based on the initial driver written by Patong Yang:
+ *
+ * https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
+ *
+ * Copyright (c) 2018 Patong Yang <patong.mxl@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+struct xr_txrx_clk_mask {
+ u16 tx;
+ u16 rx0;
+ u16 rx1;
+};
+
+#define XR_INT_OSC_HZ 48000000U
+#define XR21V141X_MIN_SPEED 46U
+#define XR21V141X_MAX_SPEED XR_INT_OSC_HZ
+
+/* USB Requests */
+#define XR21V141X_SET_REQ 0
+#define XR21V141X_GET_REQ 1
+
+#define XR21V141X_CLOCK_DIVISOR_0 0x04
+#define XR21V141X_CLOCK_DIVISOR_1 0x05
+#define XR21V141X_CLOCK_DIVISOR_2 0x06
+#define XR21V141X_TX_CLOCK_MASK_0 0x07
+#define XR21V141X_TX_CLOCK_MASK_1 0x08
+#define XR21V141X_RX_CLOCK_MASK_0 0x09
+#define XR21V141X_RX_CLOCK_MASK_1 0x0a
+
+/* XR21V141X register blocks */
+#define XR21V141X_UART_REG_BLOCK 0
+#define XR21V141X_UM_REG_BLOCK 4
+#define XR21V141X_UART_CUSTOM_BLOCK 0x66
+
+/* XR21V141X UART Manager Registers */
+#define XR21V141X_UM_FIFO_ENABLE_REG 0x10
+#define XR21V141X_UM_ENABLE_TX_FIFO 0x01
+#define XR21V141X_UM_ENABLE_RX_FIFO 0x02
+
+#define XR21V141X_UM_RX_FIFO_RESET 0x18
+#define XR21V141X_UM_TX_FIFO_RESET 0x1c
+
+#define XR21V141X_UART_ENABLE_TX 0x1
+#define XR21V141X_UART_ENABLE_RX 0x2
+
+#define XR21V141X_UART_MODE_RI BIT(0)
+#define XR21V141X_UART_MODE_CD BIT(1)
+#define XR21V141X_UART_MODE_DSR BIT(2)
+#define XR21V141X_UART_MODE_DTR BIT(3)
+#define XR21V141X_UART_MODE_CTS BIT(4)
+#define XR21V141X_UART_MODE_RTS BIT(5)
+
+#define XR21V141X_UART_BREAK_ON 0xff
+#define XR21V141X_UART_BREAK_OFF 0
+
+#define XR21V141X_UART_DATA_MASK GENMASK(3, 0)
+#define XR21V141X_UART_DATA_7 0x7
+#define XR21V141X_UART_DATA_8 0x8
+
+#define XR21V141X_UART_PARITY_MASK GENMASK(6, 4)
+#define XR21V141X_UART_PARITY_SHIFT 0x4
+#define XR21V141X_UART_PARITY_NONE 0x0
+#define XR21V141X_UART_PARITY_ODD 0x1
+#define XR21V141X_UART_PARITY_EVEN 0x2
+#define XR21V141X_UART_PARITY_MARK 0x3
+#define XR21V141X_UART_PARITY_SPACE 0x4
+
+#define XR21V141X_UART_STOP_MASK BIT(7)
+#define XR21V141X_UART_STOP_SHIFT 0x7
+#define XR21V141X_UART_STOP_1 0x0
+#define XR21V141X_UART_STOP_2 0x1
+
+#define XR21V141X_UART_FLOW_MODE_NONE 0x0
+#define XR21V141X_UART_FLOW_MODE_HW 0x1
+#define XR21V141X_UART_FLOW_MODE_SW 0x2
+
+#define XR21V141X_UART_MODE_GPIO_MASK GENMASK(2, 0)
+#define XR21V141X_UART_MODE_RTS_CTS 0x1
+#define XR21V141X_UART_MODE_DTR_DSR 0x2
+#define XR21V141X_UART_MODE_RS485 0x3
+#define XR21V141X_UART_MODE_RS485_ADDR 0x4
+
+#define XR21V141X_REG_ENABLE 0x03
+#define XR21V141X_REG_FORMAT 0x0b
+#define XR21V141X_REG_FLOW_CTRL 0x0c
+#define XR21V141X_REG_XON_CHAR 0x10
+#define XR21V141X_REG_XOFF_CHAR 0x11
+#define XR21V141X_REG_LOOPBACK 0x12
+#define XR21V141X_REG_TX_BREAK 0x14
+#define XR21V141X_REG_RS845_DELAY 0x15
+#define XR21V141X_REG_GPIO_MODE 0x1a
+#define XR21V141X_REG_GPIO_DIR 0x1b
+#define XR21V141X_REG_GPIO_INT_MASK 0x1c
+#define XR21V141X_REG_GPIO_SET 0x1d
+#define XR21V141X_REG_GPIO_CLR 0x1e
+#define XR21V141X_REG_GPIO_STATUS 0x1f
+
+static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
+{
+ struct usb_serial *serial = port->serial;
+ int ret;
+
+ ret = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ XR21V141X_SET_REQ,
+ USB_DIR_OUT | USB_TYPE_VENDOR, val,
+ reg | (block << 8), NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(&port->dev, "Failed to set reg 0x%02x: %d\n", reg, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val)
+{
+ struct usb_serial *serial = port->serial;
+ u8 *dmabuf;
+ int ret;
+
+ dmabuf = kmalloc(1, GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ XR21V141X_GET_REQ,
+ USB_DIR_IN | USB_TYPE_VENDOR, 0,
+ reg | (block << 8), dmabuf, 1,
+ USB_CTRL_GET_TIMEOUT);
+ if (ret == 1) {
+ *val = *dmabuf;
+ ret = 0;
+ } else {
+ dev_err(&port->dev, "Failed to get reg 0x%02x: %d\n", reg, ret);
+ if (ret >= 0)
+ ret = -EIO;
+ }
+
+ kfree(dmabuf);
+
+ return ret;
+}
+
+static int xr_set_reg_uart(struct usb_serial_port *port, u8 reg, u8 val)
+{
+ return xr_set_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
+}
+
+static int xr_get_reg_uart(struct usb_serial_port *port, u8 reg, u8 *val)
+{
+ return xr_get_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
+}
+
+static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val)
+{
+ return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val);
+}
+
+/*
+ * According to datasheet, below is the recommended sequence for enabling UART
+ * module in XR21V141X:
+ *
+ * Enable Tx FIFO
+ * Enable Tx and Rx
+ * Enable Rx FIFO
+ */
+static int xr_uart_enable(struct usb_serial_port *port)
+{
+ int ret;
+
+ ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
+ XR21V141X_UM_ENABLE_TX_FIFO);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE,
+ XR21V141X_UART_ENABLE_TX | XR21V141X_UART_ENABLE_RX);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
+ XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO);
+
+ if (ret)
+ xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0);
+
+ return ret;
+}
+
+static int xr_uart_disable(struct usb_serial_port *port)
+{
+ int ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 0);
+
+ return ret;
+}
+
+static int xr_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ u8 status;
+ int ret;
+
+ ret = xr_get_reg_uart(port, XR21V141X_REG_GPIO_STATUS, &status);
+ if (ret)
+ return ret;
+
+ /*
+ * Modem control pins are active low, so reading '0' means it is active
+ * and '1' means not active.
+ */
+ ret = ((status & XR21V141X_UART_MODE_DTR) ? 0 : TIOCM_DTR) |
+ ((status & XR21V141X_UART_MODE_RTS) ? 0 : TIOCM_RTS) |
+ ((status & XR21V141X_UART_MODE_CTS) ? 0 : TIOCM_CTS) |
+ ((status & XR21V141X_UART_MODE_DSR) ? 0 : TIOCM_DSR) |
+ ((status & XR21V141X_UART_MODE_RI) ? 0 : TIOCM_RI) |
+ ((status & XR21V141X_UART_MODE_CD) ? 0 : TIOCM_CD);
+
+ return ret;
+}
+
+static int xr_tiocmset_port(struct usb_serial_port *port,
+ unsigned int set, unsigned int clear)
+{
+ u8 gpio_set = 0;
+ u8 gpio_clr = 0;
+ int ret = 0;
+
+ /* Modem control pins are active low, so set & clr are swapped */
+ if (set & TIOCM_RTS)
+ gpio_clr |= XR21V141X_UART_MODE_RTS;
+ if (set & TIOCM_DTR)
+ gpio_clr |= XR21V141X_UART_MODE_DTR;
+ if (clear & TIOCM_RTS)
+ gpio_set |= XR21V141X_UART_MODE_RTS;
+ if (clear & TIOCM_DTR)
+ gpio_set |= XR21V141X_UART_MODE_DTR;
+
+ /* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */
+ if (gpio_clr)
+ ret = xr_set_reg_uart(port, XR21V141X_REG_GPIO_CLR, gpio_clr);
+
+ if (gpio_set)
+ ret = xr_set_reg_uart(port, XR21V141X_REG_GPIO_SET, gpio_set);
+
+ return ret;
+}
+
+static int xr_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ return xr_tiocmset_port(port, set, clear);
+}
+
+static void xr_dtr_rts(struct usb_serial_port *port, int on)
+{
+ if (on)
+ xr_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
+ else
+ xr_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static void xr_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ u8 state;
+
+ if (break_state == 0)
+ state = XR21V141X_UART_BREAK_OFF;
+ else
+ state = XR21V141X_UART_BREAK_ON;
+
+ dev_dbg(&port->dev, "Turning break %s\n",
+ state == XR21V141X_UART_BREAK_OFF ? "off" : "on");
+ xr_set_reg_uart(port, XR21V141X_REG_TX_BREAK, state);
+}
+
+/* Tx and Rx clock mask values obtained from section 3.3.4 of datasheet */
+static const struct xr_txrx_clk_mask xr21v141x_txrx_clk_masks[] = {
+ { 0x000, 0x000, 0x000 },
+ { 0x000, 0x000, 0x000 },
+ { 0x100, 0x000, 0x100 },
+ { 0x020, 0x400, 0x020 },
+ { 0x010, 0x100, 0x010 },
+ { 0x208, 0x040, 0x208 },
+ { 0x104, 0x820, 0x108 },
+ { 0x844, 0x210, 0x884 },
+ { 0x444, 0x110, 0x444 },
+ { 0x122, 0x888, 0x224 },
+ { 0x912, 0x448, 0x924 },
+ { 0x492, 0x248, 0x492 },
+ { 0x252, 0x928, 0x292 },
+ { 0x94a, 0x4a4, 0xa52 },
+ { 0x52a, 0xaa4, 0x54a },
+ { 0xaaa, 0x954, 0x4aa },
+ { 0xaaa, 0x554, 0xaaa },
+ { 0x555, 0xad4, 0x5aa },
+ { 0xb55, 0xab4, 0x55a },
+ { 0x6b5, 0x5ac, 0xb56 },
+ { 0x5b5, 0xd6c, 0x6d6 },
+ { 0xb6d, 0xb6a, 0xdb6 },
+ { 0x76d, 0x6da, 0xbb6 },
+ { 0xedd, 0xdda, 0x76e },
+ { 0xddd, 0xbba, 0xeee },
+ { 0x7bb, 0xf7a, 0xdde },
+ { 0xf7b, 0xef6, 0x7de },
+ { 0xdf7, 0xbf6, 0xf7e },
+ { 0x7f7, 0xfee, 0xefe },
+ { 0xfdf, 0xfbe, 0x7fe },
+ { 0xf7f, 0xefe, 0xffe },
+ { 0xfff, 0xffe, 0xffd },
+};
+
+static int xr_set_baudrate(struct tty_struct *tty,
+ struct usb_serial_port *port)
+{
+ u32 divisor, baud, idx;
+ u16 tx_mask, rx_mask;
+ int ret;
+
+ baud = clamp(tty->termios.c_ospeed, XR21V141X_MIN_SPEED,
+ XR21V141X_MAX_SPEED);
+ divisor = XR_INT_OSC_HZ / baud;
+ idx = ((32 * XR_INT_OSC_HZ) / baud) & 0x1f;
+ tx_mask = xr21v141x_txrx_clk_masks[idx].tx;
+
+ if (divisor & 0x01)
+ rx_mask = xr21v141x_txrx_clk_masks[idx].rx1;
+ else
+ rx_mask = xr21v141x_txrx_clk_masks[idx].rx0;
+
+ dev_dbg(&port->dev, "Setting baud rate: %u\n", baud);
+ /*
+ * XR21V141X uses fractional baud rate generator with 48MHz internal
+ * oscillator and 19-bit programmable divisor. So theoretically it can
+ * generate most commonly used baud rates with high accuracy.
+ */
+ ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_0,
+ divisor & 0xff);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_1,
+ (divisor >> 8) & 0xff);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_2,
+ (divisor >> 16) & 0xff);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_0,
+ tx_mask & 0xff);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_1,
+ (tx_mask >> 8) & 0xff);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_0,
+ rx_mask & 0xff);
+ if (ret)
+ return ret;
+
+ ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_1,
+ (rx_mask >> 8) & 0xff);
+ if (ret)
+ return ret;
+
+ tty_encode_baud_rate(tty, baud, baud);
+
+ return 0;
+}
+
+static void xr_set_flow_mode(struct tty_struct *tty,
+ struct usb_serial_port *port)
+{
+ unsigned int cflag = tty->termios.c_cflag;
+ u8 flow, gpio_mode;
+ int ret;
+
+ ret = xr_get_reg_uart(port, XR21V141X_REG_GPIO_MODE, &gpio_mode);
+ if (ret)
+ return;
+
+ if (cflag & CRTSCTS) {
+ dev_dbg(&port->dev, "Enabling hardware flow ctrl\n");
+
+ /*
+ * RTS/CTS is the default flow control mode, so set GPIO mode
+ * for controlling the pins manually by default.
+ */
+ gpio_mode &= ~XR21V141X_UART_MODE_GPIO_MASK;
+ gpio_mode |= XR21V141X_UART_MODE_RTS_CTS;
+ flow = XR21V141X_UART_FLOW_MODE_HW;
+ } else if (I_IXON(tty)) {
+ u8 start_char = START_CHAR(tty);
+ u8 stop_char = STOP_CHAR(tty);
+
+ dev_dbg(&port->dev, "Enabling sw flow ctrl\n");
+ flow = XR21V141X_UART_FLOW_MODE_SW;
+
+ xr_set_reg_uart(port, XR21V141X_REG_XON_CHAR, start_char);
+ xr_set_reg_uart(port, XR21V141X_REG_XOFF_CHAR, stop_char);
+ } else {
+ dev_dbg(&port->dev, "Disabling flow ctrl\n");
+ flow = XR21V141X_UART_FLOW_MODE_NONE;
+ }
+
+ /*
+ * As per the datasheet, UART needs to be disabled while writing to
+ * FLOW_CONTROL register.
+ */
+ xr_uart_disable(port);
+ xr_set_reg_uart(port, XR21V141X_REG_FLOW_CTRL, flow);
+ xr_uart_enable(port);
+
+ xr_set_reg_uart(port, XR21V141X_REG_GPIO_MODE, gpio_mode);
+}
+
+static void xr_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct ktermios *termios = &tty->termios;
+ u8 bits = 0;
+ int ret;
+
+ if ((old_termios && tty->termios.c_ospeed != old_termios->c_ospeed) ||
+ !old_termios)
+ xr_set_baudrate(tty, port);
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ case CS6:
+ /* CS5 and CS6 are not supported, so just restore old setting */
+ termios->c_cflag &= ~CSIZE;
+ if (old_termios)
+ termios->c_cflag |= old_termios->c_cflag & CSIZE;
+ else
+ bits |= XR21V141X_UART_DATA_8;
+ break;
+ case CS7:
+ bits |= XR21V141X_UART_DATA_7;
+ break;
+ case CS8:
+ default:
+ bits |= XR21V141X_UART_DATA_8;
+ break;
+ }
+
+ if (C_PARENB(tty)) {
+ if (C_CMSPAR(tty)) {
+ if (C_PARODD(tty))
+ bits |= XR21V141X_UART_PARITY_MARK <<
+ XR21V141X_UART_PARITY_SHIFT;
+ else
+ bits |= XR21V141X_UART_PARITY_SPACE <<
+ XR21V141X_UART_PARITY_SHIFT;
+ } else {
+ if (C_PARODD(tty))
+ bits |= XR21V141X_UART_PARITY_ODD <<
+ XR21V141X_UART_PARITY_SHIFT;
+ else
+ bits |= XR21V141X_UART_PARITY_EVEN <<
+ XR21V141X_UART_PARITY_SHIFT;
+ }
+ }
+
+ if (C_CSTOPB(tty))
+ bits |= XR21V141X_UART_STOP_2 << XR21V141X_UART_STOP_SHIFT;
+ else
+ bits |= XR21V141X_UART_STOP_1 << XR21V141X_UART_STOP_SHIFT;
+
+ ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits);
+ if (ret)
+ return;
+
+ /* If baud rate is B0, clear DTR and RTS */
+ if (C_BAUD(tty) == B0)
+ xr_dtr_rts(port, 0);
+
+ xr_set_flow_mode(tty, port);
+}
+
+static int xr_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ int ret;
+
+ ret = xr_uart_enable(port);
+ if (ret) {
+ dev_err(&port->dev, "Failed to enable UART\n");
+ return ret;
+ }
+
+ /* Setup termios */
+ if (tty)
+ xr_set_termios(tty, port, NULL);
+
+ ret = usb_serial_generic_open(tty, port);
+ if (ret) {
+ xr_uart_disable(port);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void xr_close(struct usb_serial_port *port)
+{
+ usb_serial_generic_close(port);
+
+ xr_uart_disable(port);
+}
+
+static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(serial->interface);
+ struct usb_driver *driver = serial->type->usb_driver;
+ struct usb_interface *control_interface;
+ int ret;
+
+ /* Don't bind to control interface */
+ if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
+ return -ENODEV;
+
+ /* But claim the control interface during data interface probe */
+ control_interface = usb_ifnum_to_if(usb_dev, 0);
+ ret = usb_driver_claim_interface(driver, control_interface, NULL);
+ if (ret) {
+ dev_err(&serial->interface->dev, "Failed to claim control interface\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x04e2, 0x1410) }, /* XR21V141X */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver xr_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "xr_serial",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+ .probe = xr_probe,
+ .open = xr_open,
+ .close = xr_close,
+ .break_ctl = xr_break_ctl,
+ .set_termios = xr_set_termios,
+ .tiocmget = xr_tiocmget,
+ .tiocmset = xr_tiocmset,
+ .dtr_rts = xr_dtr_rts
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &xr_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <mani@kernel.org>");
+MODULE_DESCRIPTION("MaxLinear/Exar USB to Serial driver");
+MODULE_LICENSE("GPL");