diff options
| -rw-r--r-- | Documentation/input/alps.txt | 9 | ||||
| -rw-r--r-- | MAINTAINERS | 8 | ||||
| -rw-r--r-- | drivers/input/ff-core.c | 10 | ||||
| -rw-r--r-- | drivers/input/joystick/xpad.c | 21 | ||||
| -rw-r--r-- | drivers/input/keyboard/lm8333.c | 4 | ||||
| -rw-r--r-- | drivers/input/mouse/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/input/mouse/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/mouse/cyapa.c | 4 | ||||
| -rw-r--r-- | drivers/input/mouse/elan_i2c.h | 3 | ||||
| -rw-r--r-- | drivers/input/mouse/elan_i2c_core.c | 38 | ||||
| -rw-r--r-- | drivers/input/mouse/elan_i2c_i2c.c | 27 | ||||
| -rw-r--r-- | drivers/input/mouse/elan_i2c_smbus.c | 12 | ||||
| -rw-r--r-- | drivers/input/mouse/psmouse-base.c | 17 | ||||
| -rw-r--r-- | drivers/input/mouse/psmouse.h | 1 | ||||
| -rw-r--r-- | drivers/input/mouse/vmmouse.c | 508 | ||||
| -rw-r--r-- | drivers/input/mouse/vmmouse.h | 30 | ||||
| -rw-r--r-- | drivers/input/touchscreen/atmel_mxt_ts.c | 141 | ||||
| -rw-r--r-- | drivers/input/touchscreen/elants_i2c.c | 2 |
18 files changed, 806 insertions, 42 deletions
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index b9d229fee6b9..c86f2f1ae4f6 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -94,6 +94,10 @@ PS/2 packet format Note that the device never signals overflow condition. +For protocol version 2 devices when the trackpoint is used, and no fingers +are on the touchpad, the M R L bits signal the combined status of both the +pointingstick and touchpad buttons. + ALPS Absolute Mode - Protocol Version 1 -------------------------------------- @@ -107,7 +111,7 @@ ALPS Absolute Mode - Protocol Version 1 ALPS Absolute Mode - Protocol Version 2 --------------------------------------- - byte 0: 1 ? ? ? 1 ? ? ? + byte 0: 1 ? ? ? 1 PSM PSR PSL byte 1: 0 x6 x5 x4 x3 x2 x1 x0 byte 2: 0 x10 x9 x8 x7 ? fin ges byte 3: 0 y9 y8 y7 1 M R L @@ -115,7 +119,8 @@ ALPS Absolute Mode - Protocol Version 2 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for -the DualPoint Stick. +the DualPoint Stick. For non interleaved dualpoint devices the pointingstick +buttons get reported separately in the PSM, PSR and PSL bits. Dualpoint device -- interleaved packet format --------------------------------------------- diff --git a/MAINTAINERS b/MAINTAINERS index 1af6b9a9a6d5..b4b131a0b939 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10597,6 +10597,14 @@ L: linux-kernel@vger.kernel.org S: Maintained F: drivers/misc/vmw_balloon.c +VMWARE VMMOUSE SUBDRIVER +M: "VMware Graphics" <linux-graphics-maintainer@vmware.com> +M: "VMware, Inc." <pv-drivers@vmware.com> +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/input/mouse/vmmouse.c +F: drivers/input/mouse/vmmouse.h + VMWARE VMXNET3 ETHERNET DRIVER M: Shreyas Bhatewara <sbhatewara@vmware.com> M: "VMware, Inc." <pv-drivers@vmware.com> diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index f50f6dd92274..b81c88c43452 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -23,8 +23,6 @@ /* #define DEBUG */ -#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt - #include <linux/input.h> #include <linux/module.h> #include <linux/mutex.h> @@ -116,7 +114,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, if (effect->type < FF_EFFECT_MIN || effect->type > FF_EFFECT_MAX || !test_bit(effect->type, dev->ffbit)) { - pr_debug("invalid or not supported effect type in upload\n"); + dev_dbg(&dev->dev, "invalid or not supported effect type in upload\n"); return -EINVAL; } @@ -124,7 +122,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, (effect->u.periodic.waveform < FF_WAVEFORM_MIN || effect->u.periodic.waveform > FF_WAVEFORM_MAX || !test_bit(effect->u.periodic.waveform, dev->ffbit))) { - pr_debug("invalid or not supported wave form in upload\n"); + dev_dbg(&dev->dev, "invalid or not supported wave form in upload\n"); return -EINVAL; } @@ -246,7 +244,7 @@ static int flush_effects(struct input_dev *dev, struct file *file) struct ff_device *ff = dev->ff; int i; - pr_debug("flushing now\n"); + dev_dbg(&dev->dev, "flushing now\n"); mutex_lock(&ff->mutex); @@ -316,7 +314,7 @@ int input_ff_create(struct input_dev *dev, unsigned int max_effects) int i; if (!max_effects) { - pr_err("cannot allocate device without any effects\n"); + dev_err(&dev->dev, "cannot allocate device without any effects\n"); return -EINVAL; } diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 3aa2f3f3da5b..61c761156371 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -31,12 +31,14 @@ * - the iForce driver drivers/char/joystick/iforce.c * - the skeleton-driver drivers/usb/usb-skeleton.c * - Xbox 360 information http://www.free60.org/wiki/Gamepad + * - Xbox One information https://github.com/quantus/xbox-one-controller-protocol * * Thanks to: * - ITO Takayuki for providing essential xpad information on his website * - Vojtech Pavlik - iforce driver / input subsystem * - Greg Kroah-Hartman - usb-skeleton driver * - XBOX Linux project - extra USB id's + * - Pekka Pöyry (quantus) - Xbox One controller reverse engineering * * TODO: * - fine tune axes (especially trigger axes) @@ -828,6 +830,23 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + case XTYPE_XBOXONE: + xpad->odata[0] = 0x09; /* activate rumble */ + xpad->odata[1] = 0x08; + xpad->odata[2] = 0x00; + xpad->odata[3] = 0x08; /* continuous effect */ + xpad->odata[4] = 0x00; /* simple rumble mode */ + xpad->odata[5] = 0x03; /* L and R actuator only */ + xpad->odata[6] = 0x00; /* TODO: LT actuator */ + xpad->odata[7] = 0x00; /* TODO: RT actuator */ + xpad->odata[8] = strong / 256; /* left actuator */ + xpad->odata[9] = weak / 256; /* right actuator */ + xpad->odata[10] = 0x80; /* length of pulse */ + xpad->odata[11] = 0x00; /* stop period of pulse */ + xpad->irq_out->transfer_buffer_length = 12; + + return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + default: dev_dbg(&xpad->dev->dev, "%s - rumble command sent to unsupported xpad type: %d\n", @@ -841,7 +860,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect static int xpad_init_ff(struct usb_xpad *xpad) { - if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE) + if (xpad->xtype == XTYPE_UNKNOWN) return 0; input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c index 9081cbef11ea..0ad422b8a260 100644 --- a/drivers/input/keyboard/lm8333.c +++ b/drivers/input/keyboard/lm8333.c @@ -1,6 +1,6 @@ /* * LM8333 keypad driver - * Copyright (C) 2012 Wolfram Sang, Pengutronix <w.sang@pengutronix.de> + * Copyright (C) 2012 Wolfram Sang, Pengutronix <kernel@pengutronix.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -231,6 +231,6 @@ static struct i2c_driver lm8333_driver = { }; module_i2c_driver(lm8333_driver); -MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>"); +MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); MODULE_DESCRIPTION("LM8333 keyboard driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 4658b5d41dd7..7462d2fc8cfe 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -149,6 +149,18 @@ config MOUSE_PS2_FOCALTECH If unsure, say Y. +config MOUSE_PS2_VMMOUSE + bool "Virtual mouse (vmmouse)" + depends on MOUSE_PS2 && X86 && HYPERVISOR_GUEST + help + Say Y here if you are running under control of VMware hypervisor + (ESXi, Workstation or Fusion). Also make sure that when you enable + this option, you remove the xf86-input-vmmouse user-space driver + or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't + load in the presence of an in-kernel vmmouse driver. + + If unsure, say N. + config MOUSE_SERIAL tristate "Serial mouse" select SERIO diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 8a9c98e76d9c..793300bfbddd 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -36,6 +36,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o +psmouse-$(CONFIG_MOUSE_PS2_VMMOUSE) += vmmouse.o elan_i2c-objs := elan_i2c_core.o elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c index 58f4f6fa4857..efe148474e7f 100644 --- a/drivers/input/mouse/cyapa.c +++ b/drivers/input/mouse/cyapa.c @@ -723,7 +723,7 @@ static ssize_t cyapa_update_suspend_scanrate(struct device *dev, } else if (sysfs_streq(buf, OFF_MODE_NAME)) { cyapa->suspend_power_mode = PWR_MODE_OFF; } else if (!kstrtou16(buf, 10, &sleep_time)) { - cyapa->suspend_sleep_time = max_t(u16, sleep_time, 1000); + cyapa->suspend_sleep_time = min_t(u16, sleep_time, 1000); cyapa->suspend_power_mode = cyapa_sleep_time_to_pwr_cmd(cyapa->suspend_sleep_time); } else { @@ -840,7 +840,7 @@ static ssize_t cyapa_update_rt_suspend_scanrate(struct device *dev, if (error) return error; - cyapa->runtime_suspend_sleep_time = max_t(u16, time, 1000); + cyapa->runtime_suspend_sleep_time = min_t(u16, time, 1000); cyapa->runtime_suspend_power_mode = cyapa_sleep_time_to_pwr_cmd(cyapa->runtime_suspend_sleep_time); diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index 9b2dc015f20c..6d5f8a4c1748 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -25,6 +25,7 @@ #define ETP_ENABLE_CALIBRATE 0x0002 #define ETP_DISABLE_CALIBRATE 0x0000 #define ETP_DISABLE_POWER 0x0001 +#define ETP_PRESSURE_OFFSET 25 /* IAP Firmware handling */ #define ETP_FW_NAME "elan_i2c.bin" @@ -79,6 +80,8 @@ struct elan_transport_ops { struct completion *reset_done); int (*get_report)(struct i2c_client *client, u8 *report); + int (*get_pressure_adjustment)(struct i2c_client *client, + int *adjustment); }; extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops; diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 375d98f47483..fd5068b2542d 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -4,7 +4,7 @@ * Copyright (c) 2013 ELAN Microelectronics Corp. * * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw> - * Version: 1.5.6 + * Version: 1.5.7 * * Based on cyapa driver: * copyright (c) 2011-2012 Cypress Semiconductor, Inc. @@ -40,8 +40,7 @@ #include "elan_i2c.h" #define DRIVER_NAME "elan_i2c" -#define ELAN_DRIVER_VERSION "1.5.6" -#define ETP_PRESSURE_OFFSET 25 +#define ELAN_DRIVER_VERSION "1.5.7" #define ETP_MAX_PRESSURE 255 #define ETP_FWIDTH_REDUCE 90 #define ETP_FINGER_WIDTH 15 @@ -53,6 +52,7 @@ #define ETP_REPORT_ID_OFFSET 2 #define ETP_TOUCH_INFO_OFFSET 3 #define ETP_FINGER_DATA_OFFSET 4 +#define ETP_HOVER_INFO_OFFSET 30 #define ETP_MAX_REPORT_LEN 34 /* The main device structure */ @@ -81,7 +81,7 @@ struct elan_tp_data { u8 sm_version; u8 iap_version; u16 fw_checksum; - + int pressure_adjustment; u8 mode; bool irq_wake; @@ -229,6 +229,11 @@ static int elan_query_device_info(struct elan_tp_data *data) if (error) return error; + error = data->ops->get_pressure_adjustment(data->client, + &data->pressure_adjustment); + if (error) + return error; + return 0; } @@ -721,13 +726,13 @@ static const struct attribute_group *elan_sysfs_groups[] = { */ static void elan_report_contact(struct elan_tp_data *data, int contact_num, bool contact_valid, - u8 *finger_data) + bool hover_event, u8 *finger_data) { struct input_dev *input = data->input; unsigned int pos_x, pos_y; unsigned int pressure, mk_x, mk_y; - unsigned int area_x, area_y, major, minor, new_pressure; - + unsigned int area_x, area_y, major, minor; + unsigned int scaled_pressure; if (contact_valid) { pos_x = ((finger_data[0] & 0xf0) << 4) | @@ -756,15 +761,18 @@ static void elan_report_contact(struct elan_tp_data *data, major = max(area_x, area_y); minor = min(area_x, area_y); - new_pressure = pressure + ETP_PRESSURE_OFFSET; - if (new_pressure > ETP_MAX_PRESSURE) - new_pressure = ETP_MAX_PRESSURE; + scaled_pressure = pressure + data->pressure_adjustment; + + if (scaled_pressure > ETP_MAX_PRESSURE) + scaled_pressure = ETP_MAX_PRESSURE; input_mt_slot(input, contact_num); input_mt_report_slot_state(input, MT_TOOL_FINGER, true); input_report_abs(input, ABS_MT_POSITION_X, pos_x); input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y); - input_report_abs(input, ABS_MT_PRESSURE, new_pressure); + input_report_abs(input, ABS_MT_DISTANCE, hover_event); + input_report_abs(input, ABS_MT_PRESSURE, + hover_event ? 0 : scaled_pressure); input_report_abs(input, ABS_TOOL_WIDTH, mk_x); input_report_abs(input, ABS_MT_TOUCH_MAJOR, major); input_report_abs(input, ABS_MT_TOUCH_MINOR, minor); @@ -780,11 +788,14 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet) u8 *finger_data = &packet[ETP_FINGER_DATA_OFFSET]; int i; u8 tp_info = packet[ETP_TOUCH_INFO_OFFSET]; - bool contact_valid; + u8 hover_info = packet[ETP_HOVER_INFO_OFFSET]; + bool contact_valid, hover_event; + hover_event = hover_info & 0x40; for (i = 0; i < ETP_MAX_FINGERS; i++) { contact_valid = tp_info & (1U << (3 + i)); - elan_report_contact(data, i, contact_valid, finger_data); + elan_report_contact(data, i, contact_valid, hover_event, + finger_data); if (contact_valid) finger_data += ETP_FINGER_DATA_LEN; @@ -878,6 +889,7 @@ static int elan_setup_input_device(struct elan_tp_data *data) ETP_FINGER_WIDTH * max_width, 0, 0); input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, ETP_FINGER_WIDTH * min_width, 0, 0); + input_set_abs_params(input, ABS_MT_DISTANCE, 0, 1, 0, 0); data->input = input; diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c index 6cf0def6d35e..a0acbbf83bfd 100644 --- a/drivers/input/mouse/elan_i2c_i2c.c +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -41,6 +41,7 @@ #define ETP_I2C_MAX_X_AXIS_CMD 0x0106 #define ETP_I2C_MAX_Y_AXIS_CMD 0x0107 #define ETP_I2C_RESOLUTION_CMD 0x0108 +#define ETP_I2C_PRESSURE_CMD 0x010A #define ETP_I2C_IAP_VERSION_CMD 0x0110 #define ETP_I2C_SET_CMD 0x0300 #define ETP_I2C_POWER_CMD 0x0307 @@ -364,8 +365,29 @@ static int elan_i2c_get_num_traces(struct i2c_client *client, return error; } - *x_traces = val[0] - 1; - *y_traces = val[1] - 1; + *x_traces = val[0]; + *y_traces = val[1]; + + return 0; +} + +static int elan_i2c_get_pressure_adjustment(struct i2c_client *client, + int *adjustment) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_PRESSURE_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get pressure format: %d\n", + error); + return error; + } + + if ((val[0] >> 4) & 0x1) + *adjustment = 0; + else + *adjustment = ETP_PRESSURE_OFFSET; return 0; } @@ -602,6 +624,7 @@ const struct elan_transport_ops elan_i2c_ops = { .get_sm_version = elan_i2c_get_sm_version, .get_product_id = elan_i2c_get_product_id, .get_checksum = elan_i2c_get_checksum, + .get_pressure_adjustment = elan_i2c_get_pressure_adjustment, .get_max = elan_i2c_get_max, .get_resolution = elan_i2c_get_resolution, diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c index 06a2bcd1cda2..30ab80dbcdd6 100644 --- a/drivers/input/mouse/elan_i2c_smbus.c +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -268,12 +268,19 @@ static int elan_smbus_get_num_traces(struct i2c_client *client, return error; } - *x_traces = val[1] - 1; - *y_traces = val[2] - 1; + *x_traces = val[1]; + *y_traces = val[2]; return 0; } +static int elan_smbus_get_pressure_adjustment(struct i2c_client *client, + int *adjustment) +{ + *adjustment = ETP_PRESSURE_OFFSET; + return 0; +} + static int elan_smbus_iap_get_mode(struct i2c_client *client, enum tp_mode *mode) { @@ -497,6 +504,7 @@ const struct elan_transport_ops elan_smbus_ops = { .get_sm_version = elan_smbus_get_sm_version, .get_product_id = elan_smbus_get_product_id, .get_checksum = elan_smbus_get_checksum, + .get_pressure_adjustment = elan_smbus_get_pressure_adjustment, .get_max = elan_smbus_get_max, .get_resolution = elan_smbus_get_resolution, diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 27057df7ba74..5bb1658f60c7 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -36,6 +36,7 @@ #include "sentelic.h" #include "cypress_ps2.h" #include "focaltech.h" +#include "vmmouse.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -790,6 +791,13 @@ static int psmouse_extensions(struct psmouse *psmouse, } } + if (psmouse_do_detect(vmmouse_detect, psmouse, set_properties) == 0) { + if (max_proto > PSMOUSE_IMEX) { + if (!set_properties || vmmouse_init(psmouse) == 0) + return PSMOUSE_VMMOUSE; + } + } + /* * Try Kensington ThinkingMouse (we try first, because synaptics probe * upsets the thinkingmouse). @@ -1113,6 +1121,15 @@ static const struct psmouse_protocol psmouse_protocols[] = { .init = focaltech_init, }, #endif +#ifdef CONFIG_MOUSE_PS2_VMMOUSE + { + .type = PSMOUSE_VMMOUSE, + .name = VMMOUSE_PSNAME, + .alias = "vmmouse", + .detect = vmmouse_detect, + .init = vmmouse_init, + }, +#endif { .type = PSMOUSE_AUTO, .name = "auto", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index d02e1bdc9ae4..ad5a5a1ea872 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -103,6 +103,7 @@ enum psmouse_type { PSMOUSE_SYNAPTICS_RELATIVE, PSMOUSE_CYPRESS, PSMOUSE_FOCALTECH, + PSMOUSE_VMMOUSE, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c new file mode 100644 index 000000000000..e272f06258ce --- /dev/null +++ b/drivers/input/mouse/vmmouse.c @@ -0,0 +1,508 @@ +/* + * Driver for Virtual PS/2 Mouse on VMware and QEMU hypervisors. + * + * Copyright (C) 2014, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Twin device code is hugely inspired by the ALPS driver. + * Authors: + * Dmitry Torokhov <dmitry.torokhov@gmail.com> + * Thomas Hellstrom <thellstrom@vmware.com> + */ + +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/libps2.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <asm/hypervisor.h> + +#include "psmouse.h" +#include "vmmouse.h" + +#define VMMOUSE_PROTO_MAGIC 0x564D5868U +#define VMMOUSE_PROTO_PORT 0x5658 + +/* + * Main commands supported by the vmmouse hypervisor port. + */ +#define VMMOUSE_PROTO_CMD_GETVERSION 10 +#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA 39 +#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS 40 +#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND 41 +#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT 86 + +/* + * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND + */ +#define VMMOUSE_CMD_ENABLE 0x45414552U +#define VMMOUSE_CMD_DISABLE 0x000000f5U +#define VMMOUSE_CMD_REQUEST_RELATIVE 0x4c455252U +#define VMMOUSE_CMD_REQUEST_ABSOLUTE 0x53424152U + +#define VMMOUSE_ERROR 0xffff0000U + +#define VMMOUSE_VERSION_ID 0x3442554aU + +#define VMMOUSE_RELATIVE_PACKET 0x00010000U + +#define VMMOUSE_LEFT_BUTTON 0x20 +#define VMMOUSE_RIGHT_BUTTON 0x10 +#define VMMOUSE_MIDDLE_BUTTON 0x08 + +/* + * VMMouse Restrict command + */ +#define VMMOUSE_RESTRICT_ANY 0x00 +#define VMMOUSE_RESTRICT_CPL0 0x01 +#define VMMOUSE_RESTRICT_IOPL 0x02 + +#define VMMOUSE_MAX_X 0xFFFF +#define VMMOUSE_MAX_Y 0xFFFF + +#define VMMOUSE_VENDOR "VMware" +#define VMMOUSE_NAME "VMMouse" + +/** + * struct vmmouse_data - private data structure for the vmmouse driver + * + * @abs_dev: "Absolute" device used to report absolute mouse movement. + * @phys: Physical path for the absolute device. + * @dev_name: Name attribute name for the absolute device. + */ +struct vmmouse_data { + struct input_dev *abs_dev; + char phys[32]; + char dev_name[128]; +}; + +/** + * Hypervisor-specific bi-directional communication channel + * implementing the vmmouse protocol. Should never execute on + * bare metal hardware. + */ +#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4) \ +({ \ + unsigned long __dummy1, __dummy2; \ + __asm__ __volatile__ ("inl %%dx" : \ + "=a"(out1), \ + "=b"(out2), \ + "=c"(out3), \ + "=d"(out4), \ + "=S"(__dummy1), \ + "=D"(__dummy2) : \ + "a"(VMMOUSE_PROTO_MAGIC), \ + "b"(in1), \ + "c"(VMMOUSE_PROTO_CMD_##cmd), \ + "d"(VMMOUSE_PROTO_PORT) : \ + "memory"); \ +}) + +/** + * vmmouse_report_button - report button state on the correct input device + * + * @psmouse: Pointer to the psmouse struct + * @abs_dev: The absolute input device + * @rel_dev: The relative input device + * @pref_dev: The preferred device for reporting + * @code: Button code + * @value: Button value + * + * Report @value and @code on @pref_dev, unless the button is already + * pressed on the other device, in which case the state is reported on that + * device. + */ +static void vmmouse_report_button(struct psmouse *psmouse, + struct input_dev *abs_dev, + struct input_dev *rel_dev, + struct input_dev *pref_dev, + unsigned int code, int value) +{ + if (test_bit(code, abs_dev->key)) + pref_dev = abs_dev; + else if (test_bit(code, rel_dev->key)) + pref_dev = rel_dev; + + input_report_key(pref_dev, code, value); +} + +/** + * vmmouse_report_events - process events on the vmmouse communications channel + * + * @psmouse: Pointer to the psmouse struct + * + * This function pulls events from the vmmouse communications channel and + * reports them on the correct (absolute or relative) input device. When the + * communications channel is drained, or if we've processed more than 255 + * psmouse commands, the function returns PSMOUSE_FULL_PACKET. If there is a + * host- or synchronization error, the function returns PSMOUSE_BAD_DATA in + * the hope that the caller will reset the communications channel. + */ +static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse) +{ + struct input_dev *rel_dev = psmouse->dev; + struct vmmouse_data *priv = psmouse->private; + struct input_dev *abs_dev = priv->abs_dev; + struct input_dev *pref_dev; + u32 status, x, y, z; + u32 dummy1, dummy2, dummy3; + unsigned int queue_length; + unsigned int count = 255; + + while (count--) { + /* See if we have motion data. */ + VMMOUSE_CMD(ABSPOINTER_STATUS, 0, + status, dummy1, dummy2, dummy3); + if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) { + psmouse_err(psmouse, "failed to fetch status data\n"); + /* + * After a few attempts this will result in + * reconnect. + */ + return PSMOUSE_BAD_DATA; + } + + queue_length = status & 0xffff; + if (queue_length == 0) + break; + + if (queue_length % 4) { + psmouse_err(psmouse, "invalid queue length\n"); + return PSMOUSE_BAD_DATA; + } + + /* Now get it */ + VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z); + + /* + * And report what we've got. Prefer to report button + * events on the same device where we report motion events. + * This doesn't work well with the mouse wheel, though. See + * below. Ideally we would want to report that on the + * preferred device as well. + */ + if (status & VMMOUSE_RELATIVE_PACKET) { + pref_dev = rel_dev; + input_report_rel(rel_dev, REL_X, (s32)x); + input_report_rel(rel_dev, REL_Y, -(s32)y); + } else { + pref_dev = abs_dev; + input_report_abs(abs_dev, ABS_X, x); + input_report_abs(abs_dev, ABS_Y, y); + } + + /* Xorg seems to ignore wheel events on absolute devices */ + input_report_rel(rel_dev, REL_WHEEL, -(s8)((u8) z)); + + vmmouse_report_button(psmouse, abs_dev, rel_dev, + pref_dev, BTN_LEFT, + status & VMMOUSE_LEFT_BUTTON); + vmmouse_report_button(psmouse, abs_dev, rel_dev, + pref_dev, BTN_RIGHT, + status & VMMOUSE_RIGHT_BUTTON); + vmmouse_report_button(psmouse, abs_dev, rel_dev, + pref_dev, BTN_MIDDLE, + status & VMMOUSE_MIDDLE_BUTTON); + input_sync(abs_dev); + input_sync(rel_dev); + } + + return PSMOUSE_FULL_PACKET; +} + +/** + * vmmouse_process_byte - process data on the ps/2 channel + * + * @psmouse: Pointer to the psmouse struct + * + * When the ps/2 channel indicates that there is vmmouse data available, + * call vmmouse channel processing. Otherwise, continue to accept bytes. If + * there is a synchronization or communication data error, return + * PSMOUSE_BAD_DATA in the hope that the caller will reset the mouse. + */ +static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + + switch (psmouse->pktcnt) { + case 1: + return (packet[0] & 0x8) == 0x8 ? + PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA; + + case 2: + return PSMOUSE_GOOD_DATA; + + default: + return vmmouse_report_events(psmouse); + } +} + +/** + * vmmouse_disable - Disable vmmouse + * + * @psmouse: Pointer to the psmouse struct + * + * Tries to disable vmmouse mode. + */ +static void vmmouse_disable(struct psmouse *psmouse) +{ + u32 status; + u32 dummy1, dummy2, dummy3, dummy4; + + VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE, + dummy1, dummy2, dummy3, dummy4); + + VMMOUSE_CMD(ABSPOINTER_STATUS, 0, + status, dummy1, dummy2, dummy3); + + if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR) + psmouse_warn(psmouse, "failed to disable vmmouse device\n"); +} + +/** + * vmmouse_enable - Enable vmmouse and request absolute mode. + * + * @psmouse: Pointer to the psmouse struct + * + * Tries to enable vmmouse mode. Performs basic checks and requests + * absolute vmmouse mode. + * Returns 0 on success, -ENODEV on failure. + */ +static int vmmouse_enable(struct psmouse *psmouse) +{ + u32 status, version; + u32 dummy1, dummy2, dummy3, dummy4; + + /* + * Try enabling the device. If successful, we should be able to + * read valid version ID back from it. + */ + VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE, + dummy1, dummy2, dummy3, dummy4); + + /* + * See if version ID can be retrieved. + */ + VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3); + if ((status & 0x0000ffff) == 0) { + psmouse_dbg(psmouse, "empty flags - assuming no device\n"); + return -ENXIO; + } + + VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */, + version, dummy1, dummy2, dummy3); + if (version != VMMOUSE_VERSION_ID) { + psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n", + (unsigned) version, VMMOUSE_VERSION_ID); + vmmouse_disable(psmouse); + return -ENXIO; + } + + /* + * Restrict ioport access, if possible. + */ + VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0, + dummy1, dummy2, dummy3, dummy4); + + VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE, + dummy1, dummy2, dummy3, dummy4); + + return 0; +} + +/* + * Array of supported hypervisors. + */ +static const struct hypervisor_x86 *vmmouse_supported_hypervisors[] = { + &x86_hyper_vmware, +#ifdef CONFIG_KVM_GUEST + &x86_hyper_kvm, +#endif +}; + +/** + * vmmouse_check_hypervisor - Check if we're running on a supported hypervisor + */ +static bool vmmouse_check_hypervisor(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vmmouse_supported_hypervisors); i++) + if (vmmouse_supported_hypervisors[i] == x86_hyper) + return true; + + return false; +} + +/** + * vmmouse_detect - Probe whether vmmouse is available + * + * @psmouse: Pointer to the psmouse struct + * @set_properties: Whether to set psmouse name and vendor + * + * Returns 0 if vmmouse channel is available. Negative error code if not. + */ +int vmmouse_detect(struct psmouse *psmouse, bool set_properties) +{ + u32 response, version, dummy1, dummy2; + + if (!vmmouse_check_hypervisor()) { + psmouse_dbg(psmouse, + "VMMouse not running on supported hypervisor.\n"); + return -ENXIO; + } + + if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { + psmouse_dbg(psmouse, "VMMouse port in use.\n"); + return -EBUSY; + } + + /* Check if the device is present */ + response = ~VMMOUSE_PROTO_MAGIC; + VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2); + if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU) { + release_region(VMMOUSE_PROTO_PORT, 4); + return -ENXIO; + } + + if (set_properties) { + psmouse->vendor = VMMOUSE_VENDOR; + psmouse->name = VMMOUSE_NAME; + psmouse->model = version; + } + + release_region(VMMOUSE_PROTO_PORT, 4); + + return 0; +} + +/** + * vmmouse_disconnect - Take down vmmouse driver + * + * @psmouse: Pointer to the psmouse struct + * + * Takes down vmmouse driver and frees resources set up in vmmouse_init(). + */ +static void vmmouse_disconnect(struct psmouse *psmouse) +{ + struct vmmouse_data *priv = psmouse->private; + + vmmouse_disable(psmouse); + psmouse_reset(psmouse); + input_unregister_device(priv->abs_dev); + kfree(priv); + release_region(VMMOUSE_PROTO_PORT, 4); +} + +/** + * vmmouse_reconnect - Reset the ps/2 - and vmmouse connections + * + * @psmouse: Pointer to the psmouse struct + * + * Attempts to reset the mouse connections. Returns 0 on success and + * -1 on failure. + */ +static int vmmouse_reconnect(struct psmouse *psmouse) +{ + int error; + + psmouse_reset(psmouse); + vmmouse_disable(psmouse); + error = vmmouse_enable(psmouse); + if (error) { + psmouse_err(psmouse, + "Unable to re-enable mouse when reconnecting, err: %d\n", + error); + return error; + } + + return 0; +} + +/** + * vmmouse_init - Initialize the vmmouse driver + * + * @psmouse: Pointer to the psmouse struct + * + * Requests the device and tries to enable vmmouse mode. + * If successful, sets up the input device for relative movement events. + * It also allocates another input device and sets it up for absolute motion + * events. Returns 0 on success and -1 on failure. + */ +int vmmouse_init(struct psmouse *psmouse) +{ + struct vmmouse_data *priv; + struct input_dev *rel_dev = psmouse->dev, *abs_dev; + int error; + + if (!request_region(VMMOUSE_PROTO_PORT, 4, "vmmouse")) { + psmouse_dbg(psmouse, "VMMouse port in use.\n"); + return -EBUSY; + } + + psmouse_reset(psmouse); + error = vmmouse_enable(psmouse); + if (error) + goto release_region; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + abs_dev = input_allocate_device(); + if (!priv || !abs_dev) { + error = -ENOMEM; + goto init_fail; + } + + priv->abs_dev = abs_dev; + psmouse->private = priv; + + input_set_capability(rel_dev, EV_REL, REL_WHEEL); + + /* Set up and register absolute device */ + snprintf(priv->phys, sizeof(priv->phys), "%s/input1", + psmouse->ps2dev.serio->phys); + + /* Mimic name setup for relative device in psmouse-base.c */ + snprintf(priv->dev_name, sizeof(priv->dev_name), "%s %s %s", + VMMOUSE_PSNAME, VMMOUSE_VENDOR, VMMOUSE_NAME); + abs_dev->phys = priv->phys; + abs_dev->name = priv->dev_name; + abs_dev->id.bustype = BUS_I8042; + abs_dev->id.vendor = 0x0002; + abs_dev->id.product = PSMOUSE_VMMOUSE; + abs_dev->id.version = psmouse->model; + abs_dev->dev.parent = &psmouse->ps2dev.serio->dev; + + error = input_register_device(priv->abs_dev); + if (error) + goto init_fail; + + /* Set absolute device capabilities */ + input_set_capability(abs_dev, EV_KEY, BTN_LEFT); + input_set_capability(abs_dev, EV_KEY, BTN_RIGHT); + input_set_capability(abs_dev, EV_KEY, BTN_MIDDLE); + input_set_capability(abs_dev, EV_ABS, ABS_X); + input_set_capability(abs_dev, EV_ABS, ABS_Y); + input_set_abs_params(abs_dev, ABS_X, 0, VMMOUSE_MAX_X, 0, 0); + input_set_abs_params(abs_dev, ABS_Y, 0, VMMOUSE_MAX_Y, 0, 0); + + psmouse->protocol_handler = vmmouse_process_byte; + psmouse->disconnect = vmmouse_disconnect; + psmouse->reconnect = vmmouse_reconnect; + + return 0; + +init_fail: + vmmouse_disable(psmouse); + psmouse_reset(psmouse); + input_free_device(abs_dev); + kfree(priv); + psmouse->private = NULL; + +release_region: + release_region(VMMOUSE_PROTO_PORT, 4); + + return error; +} diff --git a/drivers/input/mouse/vmmouse.h b/drivers/input/mouse/vmmouse.h new file mode 100644 index 000000000000..6f126017a24c --- /dev/null +++ b/drivers/input/mouse/vmmouse.h @@ -0,0 +1,30 @@ +/* + * Driver for Virtual PS/2 Mouse on VMware and QEMU hypervisors. + * + * Copyright (C) 2014, VMware, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _VMMOUSE_H +#define _VMMOUSE_H + +#ifdef CONFIG_MOUSE_PS2_VMMOUSE +#define VMMOUSE_PSNAME "VirtualPS/2" + +int vmmouse_detect(struct psmouse *psmouse, bool set_properties); +int vmmouse_init(struct psmouse *psmouse); +#else +static inline int vmmouse_detect(struct psmouse *psmouse, bool set_properties) +{ + return -ENOSYS; +} +static inline int vmmouse_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif + +#endif diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 2875ddf37289..40b98dda8f38 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -14,6 +14,8 @@ * */ +#include <linux/acpi.h> +#include <linux/dmi.h> #include <linux/module.h> #include <linux/init.h> #include <linux/completion.h> @@ -2371,7 +2373,7 @@ static void mxt_input_close(struct input_dev *dev) } #ifdef CONFIG_OF -static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) +static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) { struct mxt_platform_data *pdata; u32 *keymap; @@ -2379,7 +2381,7 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) int proplen, i, ret; if (!client->dev.of_node) - return ERR_PTR(-ENODEV); + return ERR_PTR(-ENOENT); pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -2410,25 +2412,132 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) return pdata; } #else -static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) +static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) { - dev_dbg(&client->dev, "No platform data specified\n"); - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOENT); +} +#endif + +#ifdef CONFIG_ACPI + +struct mxt_acpi_platform_data { + const char *hid; + struct mxt_platform_data pdata; +}; + +static unsigned int samus_touchpad_buttons[] = { + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + BTN_LEFT +}; + +static struct mxt_acpi_platform_data samus_platform_data[] = { + { + /* Touchpad */ + .hid = "ATML0000", + .pdata = { + .t19_num_keys = ARRAY_SIZE(samus_touchpad_buttons), + .t19_keymap = samus_touchpad_buttons, + }, + }, + { + /* Touchscreen */ + .hid = "ATML0001", + }, + { } +}; + +static const struct dmi_system_id mxt_dmi_table[] = { + { + /* 2015 Google Pixel */ + .ident = "Chromebook Pixel 2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Samus"), + }, + .driver_data = samus_platform_data, + }, + { } +}; + +static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client) +{ + struct acpi_device *adev; + const struct dmi_system_id *system_id; + const struct mxt_acpi_platform_data *acpi_pdata; + + /* + * Ignore ACPI devices representing bootloader mode. + * + * This is a bit of a hack: Google Chromebook BIOS creates ACPI + * devices for both application and bootloader modes, but we are + * interested in application mode only (if device is in bootloader + * mode we'll end up switching into application anyway). So far + * application mode addresses were all above 0x40, so we'll use it + * as a threshold. + */ + if (client->addr < 0x40) + return ERR_PTR(-ENXIO); + + adev = ACPI_COMPANION(&client->dev); + if (!adev) + return ERR_PTR(-ENOENT); + + system_id = dmi_first_match(mxt_dmi_table); + if (!system_id) + return ERR_PTR(-ENOENT); + + acpi_pdata = system_id->driver_data; + if (!acpi_pdata) + return ERR_PTR(-ENOENT); + + while (acpi_pdata->hid) { + if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid)) + return &acpi_pdata->pdata; + + acpi_pdata++; + } + + return ERR_PTR(-ENOENT); +} +#else +static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client) +{ + return ERR_PTR(-ENOENT); } #endif +static const struct mxt_platform_data * +mxt_get_platform_data(struct i2c_client *client) +{ + const struct mxt_platform_data *pdata; + + pdata = dev_get_platdata(&client->dev); + if (pdata) + return pdata; + + pdata = mxt_parse_dt(client); + if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT) + return pdata; + + pdata = mxt_parse_acpi(client); + if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT) + return pdata; + + dev_err(&client->dev, "No platform data specified\n"); + return ERR_PTR(-EINVAL); +} + static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct mxt_data *data; const struct mxt_platform_data *pdata; int error; - pdata = dev_get_platdata(&client->dev); - if (!pdata) { - pdata = mxt_parse_dt(client); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); - } + pdata = mxt_get_platform_data(client); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL); if (!data) { @@ -2536,6 +2645,15 @@ static const struct of_device_id mxt_of_match[] = { }; MODULE_DEVICE_TABLE(of, mxt_of_match); +#ifdef CONFIG_ACPI +static const struct acpi_device_id mxt_acpi_id[] = { + { "ATML0000", 0 }, /* Touchpad */ + { "ATML0001", 0 }, /* Touchscreen */ + { } +}; +MODULE_DEVICE_TABLE(acpi, mxt_acpi_id); +#endif + static const struct i2c_device_id mxt_id[] = { { "qt602240_ts", 0 }, { "atmel_mxt_ts", 0 }, @@ -2550,6 +2668,7 @@ static struct i2c_driver mxt_driver = { .name = "atmel_mxt_ts", .owner = THIS_MODULE, .of_match_table = of_match_ptr(mxt_of_match), + .acpi_match_table = ACPI_PTR(mxt_acpi_id), .pm = &mxt_pm_ops, }, .probe = mxt_probe, diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 43b3c9c2d788..0efd766a545b 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -699,7 +699,7 @@ static int elants_i2c_fw_update(struct elants_data *ts) char *fw_name; int error; - fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version); + fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version); if (!fw_name) return -ENOMEM; |