diff options
| -rw-r--r-- | Documentation/devicetree/bindings/sound/eukrea-tlv320.txt | 15 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/fsl,esai.txt | 44 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/fsl,spdif.txt | 37 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/fsl-sai.txt | 66 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt | 61 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/imx-audio-spdif.txt | 22 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt | 45 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/sound/imx-audmux.txt | 22 | ||||
| -rw-r--r-- | sound/soc/fsl/eukrea-tlv320.c | 5 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl-asoc-card.c | 19 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_ssi.c | 15 | ||||
| -rw-r--r-- | sound/soc/fsl/imx-sgtl5000.c | 6 | ||||
| -rw-r--r-- | sound/soc/fsl/imx-spdif.c | 3 | ||||
| -rw-r--r-- | sound/soc/fsl/imx-wm8962.c | 6 |
14 files changed, 206 insertions, 160 deletions
diff --git a/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt index 0d7985c864af..6dfa88c4dc1e 100644 --- a/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt +++ b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt @@ -1,11 +1,16 @@ Audio complex for Eukrea boards with tlv320aic23 codec. Required properties: -- compatible : "eukrea,asoc-tlv320" -- eukrea,model : The user-visible name of this sound complex. -- ssi-controller : The phandle of the SSI controller. -- fsl,mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). -- fsl,mux-ext-port : The external port of the i.MX audio muxer. + + - compatible : "eukrea,asoc-tlv320" + + - eukrea,model : The user-visible name of this sound complex. + + - ssi-controller : The phandle of the SSI controller. + + - fsl,mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). + + - fsl,mux-ext-port : The external port of the i.MX audio muxer. Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 52f5b6bf3e8e..d3b6b5f48010 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -7,37 +7,39 @@ other DSPs. It has up to six transmitters and four receivers. Required properties: - - compatible : Compatible list, must contain "fsl,imx35-esai" or - "fsl,vf610-esai" + - compatible : Compatible list, must contain "fsl,imx35-esai" or + "fsl,vf610-esai" - - reg : Offset and length of the register set for the device. + - reg : Offset and length of the register set for the device. - - interrupts : Contains the spdif interrupt. + - interrupts : Contains the spdif interrupt. - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. - - dma-names : Two dmas have to be defined, "tx" and "rx". + - dma-names : Two dmas have to be defined, "tx" and "rx". - - clocks: Contains an entry for each entry in clock-names. + - clocks : Contains an entry for each entry in clock-names. - - clock-names : Includes the following entries: - "core" The core clock used to access registers - "extal" The esai baud clock for esai controller used to derive - HCK, SCK and FS. - "fsys" The system clock derived from ahb clock used to derive - HCK, SCK and FS. + - clock-names : Includes the following entries: + "core" The core clock used to access registers + "extal" The esai baud clock for esai controller used to + derive HCK, SCK and FS. + "fsys" The system clock derived from ahb clock used to + derive HCK, SCK and FS. - - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. - This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM]. + - fsl,fifo-depth : The number of elements in the transmit and receive + FIFOs. This number is the maximum allowed value for + TFCR[TFWM] or RFCR[RFWM]. - fsl,esai-synchronous: This is a boolean property. If present, indicating - that ESAI would work in the synchronous mode, which means all the settings - for Receiving would be duplicated from Transmition related registers. + that ESAI would work in the synchronous mode, which + means all the settings for Receiving would be + duplicated from Transmition related registers. - - big-endian : If this property is absent, the native endian mode will - be in use as default, or the big endian mode will be in use for all the - device registers. + - big-endian : If this property is absent, the native endian mode + will be in use as default, or the big endian mode + will be in use for all the device registers. Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 3e9e82c8eab3..b5ee32ee3706 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -6,32 +6,31 @@ a fibre cable. Required properties: - - compatible : Compatible list, must contain "fsl,imx35-spdif". + - compatible : Compatible list, must contain "fsl,imx35-spdif". - - reg : Offset and length of the register set for the device. + - reg : Offset and length of the register set for the device. - - interrupts : Contains the spdif interrupt. + - interrupts : Contains the spdif interrupt. - - dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. - - dma-names : Two dmas have to be defined, "tx" and "rx". + - dma-names : Two dmas have to be defined, "tx" and "rx". - - clocks : Contains an entry for each entry in clock-names. + - clocks : Contains an entry for each entry in clock-names. - - clock-names : Includes the following entries: - "core" The core clock of spdif controller - "rxtx<0-7>" Clock source list for tx and rx clock. - This clock list should be identical to - the source list connecting to the spdif - clock mux in "SPDIF Transceiver Clock - Diagram" of SoC reference manual. It - can also be referred to TxClk_Source - bit of register SPDIF_STC. + - clock-names : Includes the following entries: + "core" The core clock of spdif controller. + "rxtx<0-7>" Clock source list for tx and rx clock. + This clock list should be identical to the source + list connecting to the spdif clock mux in "SPDIF + Transceiver Clock Diagram" of SoC reference manual. + It can also be referred to TxClk_Source bit of + register SPDIF_STC. - - big-endian : If this property is absent, the native endian mode will - be in use as default, or the big endian mode will be in use for all the - device registers. + - big-endian : If this property is absent, the native endian mode + will be in use as default, or the big endian mode + will be in use for all the device registers. Example: diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 4956b14d4b06..044e5d76e2dd 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -5,32 +5,48 @@ which provides a synchronous audio interface that supports fullduplex serial interfaces with frame synchronization such as I2S, AC97, TDM, and codec/DSP interfaces. - Required properties: -- compatible: Compatible list, contains "fsl,vf610-sai" or "fsl,imx6sx-sai". -- reg: Offset and length of the register set for the device. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names : Must include the "bus" for register access and "mclk1" "mclk2" - "mclk3" for bit clock and frame clock providing. -- dmas : Generic dma devicetree binding as described in - Documentation/devicetree/bindings/dma/dma.txt. -- dma-names : Two dmas have to be defined, "tx" and "rx". -- pinctrl-names: Must contain a "default" entry. -- pinctrl-NNN: One property must exist for each entry in pinctrl-names. - See ../pinctrl/pinctrl-bindings.txt for details of the property values. -- big-endian: Boolean property, required if all the FTM_PWM registers - are big-endian rather than little-endian. -- lsb-first: Configures whether the LSB or the MSB is transmitted first for - the fifo data. If this property is absent, the MSB is transmitted first as - default, or the LSB is transmitted first. -- fsl,sai-synchronous-rx: This is a boolean property. If present, indicating - that SAI will work in the synchronous mode (sync Tx with Rx) which means - both the transimitter and receiver will send and receive data by following - receiver's bit clocks and frame sync clocks. -- fsl,sai-asynchronous: This is a boolean property. If present, indicating - that SAI will work in the asynchronous mode, which means both transimitter - and receiver will send and receive data by following their own bit clocks - and frame sync clocks separately. + + - compatible : Compatible list, contains "fsl,vf610-sai" or + "fsl,imx6sx-sai". + + - reg : Offset and length of the register set for the device. + + - clocks : Must contain an entry for each entry in clock-names. + + - clock-names : Must include the "bus" for register access and + "mclk1", "mclk2", "mclk3" for bit clock and frame + clock providing. + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - pinctrl-names : Must contain a "default" entry. + + - pinctrl-NNN : One property must exist for each entry in + pinctrl-names. See ../pinctrl/pinctrl-bindings.txt + for details of the property values. + + - big-endian : Boolean property, required if all the FTM_PWM + registers are big-endian rather than little-endian. + + - lsb-first : Configures whether the LSB or the MSB is transmitted + first for the fifo data. If this property is absent, + the MSB is transmitted first as default, or the LSB + is transmitted first. + + - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating + that SAI will work in the synchronous mode (sync Tx + with Rx) which means both the transimitter and the + receiver will send and receive data by following + receiver's bit clocks and frame sync clocks. + + - fsl,sai-asynchronous: This is a boolean property. If present, indicating + that SAI will work in the asynchronous mode, which + means both transimitter and receiver will send and + receive data by following their own bit clocks and + frame sync clocks separately. Note: - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt index e4acdd891e49..2f89db88fd57 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt @@ -1,33 +1,40 @@ Freescale i.MX audio complex with SGTL5000 codec Required properties: -- compatible : "fsl,imx-audio-sgtl5000" -- model : The user-visible name of this sound complex -- ssi-controller : The phandle of the i.MX SSI controller -- audio-codec : The phandle of the SGTL5000 audio codec -- audio-routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names could be power - supplies, SGTL5000 pins, and the jacks on the board: - - Power supplies: - * Mic Bias - - SGTL5000 pins: - * MIC_IN - * LINE_IN - * HP_OUT - * LINE_OUT - - Board connectors: - * Mic Jack - * Line In Jack - * Headphone Jack - * Line Out Jack - * Ext Spk - -- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) -- mux-ext-port : The external port of the i.MX audio muxer + + - compatible : "fsl,imx-audio-sgtl5000" + + - model : The user-visible name of this sound complex + + - ssi-controller : The phandle of the i.MX SSI controller + + - audio-codec : The phandle of the SGTL5000 audio codec + + - audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, SGTL5000 + pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk + + - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) + + - mux-ext-port : The external port of the i.MX audio muxer Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt index 7d13479f9c3c..da84a442ccea 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt +++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt @@ -2,23 +2,25 @@ Freescale i.MX audio complex with S/PDIF transceiver Required properties: - - compatible : "fsl,imx-audio-spdif" + - compatible : "fsl,imx-audio-spdif" - - model : The user-visible name of this sound complex + - model : The user-visible name of this sound complex - - spdif-controller : The phandle of the i.MX S/PDIF controller + - spdif-controller : The phandle of the i.MX S/PDIF controller Optional properties: - - spdif-out : This is a boolean property. If present, the transmitting - function of S/PDIF will be enabled, indicating there's a physical - S/PDIF out connector/jack on the board or it's connecting to some - other IP block, such as an HDMI encoder/display-controller. + - spdif-out : This is a boolean property. If present, the + transmitting function of S/PDIF will be enabled, + indicating there's a physical S/PDIF out connector + or jack on the board or it's connecting to some + other IP block, such as an HDMI encoder or + display-controller. - - spdif-in : This is a boolean property. If present, the receiving - function of S/PDIF will be enabled, indicating there's a physical - S/PDIF in connector/jack on the board. + - spdif-in : This is a boolean property. If present, the receiving + function of S/PDIF will be enabled, indicating there + is a physical S/PDIF in connector/jack on the board. * Note: At least one of these two properties should be set in the DT binding. diff --git a/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt b/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt index f49450a87890..acea71bee34f 100644 --- a/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt +++ b/Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt @@ -1,25 +1,32 @@ Freescale i.MX audio complex with WM8962 codec Required properties: -- compatible : "fsl,imx-audio-wm8962" -- model : The user-visible name of this sound complex -- ssi-controller : The phandle of the i.MX SSI controller -- audio-codec : The phandle of the WM8962 audio codec -- audio-routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names could be power - supplies, WM8962 pins, and the jacks on the board: - - Power supplies: - * Mic Bias - - Board connectors: - * Mic Jack - * Headphone Jack - * Ext Spk - -- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) -- mux-ext-port : The external port of the i.MX audio muxer + + - compatible : "fsl,imx-audio-wm8962" + + - model : The user-visible name of this sound complex + + - ssi-controller : The phandle of the i.MX SSI controller + + - audio-codec : The phandle of the WM8962 audio codec + + - audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, WM8962 + pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + Board connectors: + * Mic Jack + * Headphone Jack + * Ext Spk + + - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX) + + - mux-ext-port : The external port of the i.MX audio muxer Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index f88a00e54c63..b30a737e209e 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -1,18 +1,24 @@ Freescale Digital Audio Mux (AUDMUX) device Required properties: -- compatible : "fsl,imx21-audmux" for AUDMUX version firstly used on i.MX21, - or "fsl,imx31-audmux" for the version firstly used on i.MX31. -- reg : Should contain AUDMUX registers location and length + + - compatible : "fsl,imx21-audmux" for AUDMUX version firstly used + on i.MX21, or "fsl,imx31-audmux" for the version + firstly used on i.MX31. + + - reg : Should contain AUDMUX registers location and length. An initial configuration can be setup using child nodes. Required properties of optional child nodes: -- fsl,audmux-port : Integer of the audmux port that is configured by this - child node. -- fsl,port-config : List of configuration options for the specific port. For - imx31-audmux and above, it is a list of tuples <ptcr pdcr>. For - imx21-audmux it is a list of pcr values. + + - fsl,audmux-port : Integer of the audmux port that is configured by this + child node. + + - fsl,port-config : List of configuration options for the specific port. + For imx31-audmux and above, it is a list of tuples + <ptcr pdcr>. For imx21-audmux it is a list of pcr + values. Example: diff --git a/sound/soc/fsl/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c index eb093d5b85c4..b175b0145a42 100644 --- a/sound/soc/fsl/eukrea-tlv320.c +++ b/sound/soc/fsl/eukrea-tlv320.c @@ -105,7 +105,7 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) int ret; int int_port = 0, ext_port; struct device_node *np = pdev->dev.of_node; - struct device_node *ssi_np, *codec_np; + struct device_node *ssi_np = NULL, *codec_np = NULL; eukrea_tlv320.dev = &pdev->dev; if (np) { @@ -217,8 +217,7 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) err: if (ret) dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); - if (np) - of_node_put(ssi_np); + of_node_put(ssi_np); return ret; } diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 007c772f3cef..3f6959c8e2f7 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -51,6 +51,7 @@ struct codec_priv { * @sysclk_freq[2]: SYSCLK rates for set_sysclk() * @sysclk_dir[2]: SYSCLK directions for set_sysclk() * @sysclk_id[2]: SYSCLK ids for set_sysclk() + * @slot_width: Slot width of each frame * * Note: [1] for tx and [0] for rx */ @@ -58,6 +59,7 @@ struct cpu_priv { unsigned long sysclk_freq[2]; u32 sysclk_dir[2]; u32 sysclk_id[2]; + u32 slot_width; }; /** @@ -125,7 +127,12 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream, priv->sample_rate = params_rate(params); priv->sample_format = params_format(params); - if (priv->card.set_bias_level) + /* + * If codec-dai is DAI Master and all configurations are already in the + * set_bias_level(), bypass the remaining settings in hw_params(). + * Note: (dai_fmt & CBM_CFM) includes CBM_CFM and CBM_CFS. + */ + if (priv->card.set_bias_level && priv->dai_fmt & SND_SOC_DAIFMT_CBM_CFM) return 0; /* Specific configurations of DAIs starts from here */ @@ -137,6 +144,15 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream, return ret; } + if (cpu_priv->slot_width) { + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, + cpu_priv->slot_width); + if (ret) { + dev_err(dev, "failed to set TDM slot for cpu dai\n"); + return ret; + } + } + return 0; } @@ -448,6 +464,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->cpu_priv.sysclk_freq[RX] = priv->codec_priv.mclk_freq; priv->cpu_priv.sysclk_dir[TX] = SND_SOC_CLOCK_OUT; priv->cpu_priv.sysclk_dir[RX] = SND_SOC_CLOCK_OUT; + priv->cpu_priv.slot_width = 32; priv->dai_fmt |= SND_SOC_DAIFMT_CBS_CFS; } else if (of_device_is_compatible(np, "fsl,imx-audio-sgtl5000")) { priv->codec_priv.mclk_id = SGTL5000_SYSCLK; diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 7fd3cbcd74c0..b6b0d25f6ace 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -67,8 +67,6 @@ /** * FSLSSI_I2S_FORMATS: audio formats supported by the SSI * - * This driver currently only supports the SSI running in I2S slave mode. - * * The SSI has a limitation in that the samples must be in the same byte * order as the host CPU. This is because when multiple bytes are written * to the STX register, the bytes and bits must be written in the same @@ -1363,7 +1361,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) return PTR_ERR(ssi_private->regs); } - ssi_private->irq = irq_of_parse_and_map(np, 0); + ssi_private->irq = platform_get_irq(pdev, 0); if (!ssi_private->irq) { dev_err(&pdev->dev, "no irq for node %s\n", np->full_name); return -ENXIO; @@ -1389,7 +1387,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) if (ssi_private->soc->imx) { ret = fsl_ssi_imx_probe(pdev, ssi_private, iomem); if (ret) - goto error_irqmap; + return ret; } ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component, @@ -1412,7 +1410,7 @@ static int fsl_ssi_probe(struct platform_device *pdev) ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev); if (ret) - goto error_asoc_register; + goto error_irq; /* * If codec-handle property is missing from SSI node, we assume @@ -1460,10 +1458,6 @@ error_asoc_register: if (ssi_private->soc->imx) fsl_ssi_imx_clean(pdev, ssi_private); -error_irqmap: - if (ssi_private->use_dma) - irq_dispose_mapping(ssi_private->irq); - return ret; } @@ -1480,9 +1474,6 @@ static int fsl_ssi_remove(struct platform_device *pdev) if (ssi_private->soc->imx) fsl_ssi_imx_clean(pdev, ssi_private); - if (ssi_private->use_dma) - irq_dispose_mapping(ssi_private->irq); - return 0; } diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index 1cb22dd034eb..1dab963a59f7 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -175,10 +175,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) fail: if (data && !IS_ERR(data->codec_clk)) clk_put(data->codec_clk); - if (ssi_np) - of_node_put(ssi_np); - if (codec_np) - of_node_put(codec_np); + of_node_put(ssi_np); + of_node_put(codec_np); return ret; } diff --git a/sound/soc/fsl/imx-spdif.c b/sound/soc/fsl/imx-spdif.c index e1dc40143600..0c9068ebe1e7 100644 --- a/sound/soc/fsl/imx-spdif.c +++ b/sound/soc/fsl/imx-spdif.c @@ -74,8 +74,7 @@ static int imx_spdif_audio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); end: - if (spdif_np) - of_node_put(spdif_np); + of_node_put(spdif_np); return ret; } diff --git a/sound/soc/fsl/imx-wm8962.c b/sound/soc/fsl/imx-wm8962.c index 3a3d17ce6ba4..48179ffe1543 100644 --- a/sound/soc/fsl/imx-wm8962.c +++ b/sound/soc/fsl/imx-wm8962.c @@ -281,10 +281,8 @@ static int imx_wm8962_probe(struct platform_device *pdev) clk_fail: clk_disable_unprepare(data->codec_clk); fail: - if (ssi_np) - of_node_put(ssi_np); - if (codec_np) - of_node_put(codec_np); + of_node_put(ssi_np); + of_node_put(codec_np); return ret; } |