diff options
| -rw-r--r-- | arch/powerpc/boot/dts/sbc8349.dts | 331 | ||||
| -rw-r--r-- | arch/powerpc/configs/83xx/sbc834x_defconfig | 74 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/Kconfig | 7 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/sbc834x.c | 73 |
5 files changed, 0 insertions, 486 deletions
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts deleted file mode 100644 index fc89e00b765c..000000000000 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ /dev/null @@ -1,331 +0,0 @@ -/* - * SBC8349E Device Tree Source - * - * Copyright 2007 Wind River Inc. - * - * Paul Gortmaker (see MAINTAINERS for contact information) - * - * -based largely on the Freescale MPC834x_MDS dts. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; - -/ { - model = "SBC8349E"; - compatible = "SBC834xE"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8349@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; // 256MB at 0 - }; - - soc8349@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - ranges = <0x0 0xe0000000 0x00100000>; - reg = <0xe0000000 0x00000200>; - bus-frequency = <0>; - - wdt@200 { - compatible = "mpc83xx_wdt"; - reg = <0x200 0x100>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <15 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - }; - - spi@7000 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <0x7000 0x1000>; - interrupts = <16 0x8>; - interrupt-parent = <&ipic>; - mode = "cpu"; - }; - - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a8>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - reg = <0x180 0x28>; - cell-index = <3>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - - /* phy type (ULPI or SERIAL) are only types supported for MPH */ - /* port = 0 or 1 */ - usb@22000 { - compatible = "fsl-usb2-mph"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <39 0x8>; - phy_type = "ulpi"; - port0; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 0x8 33 0x8 34 0x8>; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - linux,network-index = <0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@19 { - interrupt-parent = <&ipic>; - interrupts = <20 0x8>; - reg = <0x19>; - }; - - phy1: ethernet-phy@1a { - interrupt-parent = <&ipic>; - interrupts = <21 0x8>; - reg = <0x1a>; - }; - - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 0x8 36 0x8 37 0x8>; - interrupt-parent = <&ipic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - linux,network-index = <1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <9 0x8>; - interrupt-parent = <&ipic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <10 0x8>; - interrupt-parent = <&ipic>; - }; - - crypto@30000 { - compatible = "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x7e>; - fsl,descriptor-types-mask = <0x01010ebf>; - }; - - /* IPIC - * interrupts cell = <intr #, sense> - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - ipic: pic@700 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x700 0x100>; - device_type = "ipic"; - }; - }; - - localbus@e0005000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8349-localbus", "simple-bus"; - reg = <0xe0005000 0x1000>; - interrupts = <77 0x8>; - interrupt-parent = <&ipic>; - ranges = <0x0 0x0 0xff800000 0x00800000 /* 8MB Flash */ - 0x1 0x0 0xf8000000 0x00002000 /* 8KB EEPROM */ - 0x2 0x0 0x10000000 0x04000000 /* 64MB SDRAM */ - 0x3 0x0 0x10000000 0x04000000>; /* 64MB SDRAM */ - - flash@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "intel,28F640J3A", "cfi-flash"; - reg = <0x0 0x0 0x800000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "user"; - reg = <0x00040000 0x006c0000>; - }; - - partition@700000 { - label = "legacy u-boot"; - reg = <0x00700000 0x00100000>; - read-only; - }; - - }; - }; - - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 0x8800 0x0 0x0 0x1 &ipic 48 0x8 - 0x8800 0x0 0x0 0x2 &ipic 17 0x8 - 0x8800 0x0 0x0 0x3 &ipic 18 0x8 - 0x8800 0x0 0x0 0x4 &ipic 19 0x8>; - - interrupt-parent = <&ipic>; - interrupts = <0x42 0x8>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig deleted file mode 100644 index 7d74699334da..000000000000 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_83xx=y -CONFIG_SBC834x=y -CONFIG_GEN_RTC=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_SCSI=y -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_GIANFAR=y -CONFIG_BROADCOM_PHY=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_STORAGE=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 7e38b7b71a5a..071f53b0c0a0 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -90,13 +90,6 @@ config MPC837x_RDB help This option enables support for the MPC837x RDB and WLAN Boards. -config SBC834x - bool "Wind River SBC834x" - select DEFAULT_UIMAGE - select PPC_MPC834x - help - This option enables support for the Wind River SBC834x board. - config ASP834x bool "Analogue & Micro ASP 834x" select PPC_MPC834x diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index bb4720897f6a..41cb5f842eff 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o -obj-$(CONFIG_SBC834x) += sbc834x.o obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o obj-$(CONFIG_ASP834x) += asp834x.o obj-$(CONFIG_KMETER1) += km83xx.o diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c deleted file mode 100644 index cb4bdabfdf1c..000000000000 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/sbc834x.c - * - * Wind River SBC834x board specific routines - * - * By Paul Gortmaker (see MAINTAINERS for contact information) - * - * Based largely on the mpc834x_mds.c support by Kumar Gala. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/of_platform.h> - -#include <linux/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/ipic.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> - -#include "mpc83xx.h" - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init sbc834x_setup_arch(void) -{ - mpc83xx_setup_arch(); -} - -machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices); - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init sbc834x_probe(void) -{ - return of_machine_is_compatible("SBC834xE"); -} - -define_machine(sbc834x) { - .name = "SBC834xE", - .probe = sbc834x_probe, - .setup_arch = sbc834x_setup_arch, - .init_IRQ = mpc83xx_ipic_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; |