diff options
| -rw-r--r-- | arch/microblaze/pci/pci-common.c | 1640 | ||||
| -rw-r--r-- | arch/microblaze/pci/pci_32.c | 430 |
2 files changed, 2070 insertions, 0 deletions
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c new file mode 100644 index 000000000000..f03f8be2740a --- /dev/null +++ b/arch/microblaze/pci/pci-common.c @@ -0,0 +1,1640 @@ +/* + * Contains common pci routines for ALL ppc platform + * (based on pci_32.c and pci_64.c) + * + * Port for PPC64 David Engebretsen, IBM Corp. + * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. + * + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * Rework, based on alpha PCI code. + * + * Common pmac/prep/chrp pci routines. -- Cort + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/list.h> +#include <linux/syscalls.h> +#include <linux/irq.h> +#include <linux/vmalloc.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/byteorder.h> + +static DEFINE_SPINLOCK(hose_spinlock); +LIST_HEAD(hose_list); + +/* XXX kill that some day ... */ +static int global_phb_number; /* Global phb counter */ + +/* ISA Memory physical address */ +resource_size_t isa_mem_base; + +/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */ +unsigned int pci_flags; + +static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; + +void set_pci_dma_ops(struct dma_map_ops *dma_ops) +{ + pci_dma_ops = dma_ops; +} + +struct dma_map_ops *get_pci_dma_ops(void) +{ + return pci_dma_ops; +} +EXPORT_SYMBOL(get_pci_dma_ops); + +int pci_set_dma_mask(struct pci_dev *dev, u64 mask) +{ + return dma_set_mask(&dev->dev, mask); +} + +int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) +{ + int rc; + + rc = dma_set_mask(&dev->dev, mask); + dev->dev.coherent_dma_mask = dev->dma_mask; + + return rc; +} + +struct pci_controller *pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL); + if (!phb) + return NULL; + spin_lock(&hose_spinlock); + phb->global_number = global_phb_number++; + list_add_tail(&phb->list_node, &hose_list); + spin_unlock(&hose_spinlock); + phb->dn = dev; + phb->is_dynamic = mem_init_done; + return phb; +} + +void pcibios_free_controller(struct pci_controller *phb) +{ + spin_lock(&hose_spinlock); + list_del(&phb->list_node); + spin_unlock(&hose_spinlock); + + if (phb->is_dynamic) + kfree(phb); +} + +static resource_size_t pcibios_io_size(const struct pci_controller *hose) +{ + return hose->io_resource.end - hose->io_resource.start + 1; +} + +int pcibios_vaddr_is_ioport(void __iomem *address) +{ + int ret = 0; + struct pci_controller *hose; + resource_size_t size; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_virt && + address < (hose->io_base_virt + size)) { + ret = 1; + break; + } + } + spin_unlock(&hose_spinlock); + return ret; +} + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose; + resource_size_t size; + unsigned long ret = ~0; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + ret = base + (address - hose->io_base_phys); + break; + } + } + spin_unlock(&hose_spinlock); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + +/* + * Return the domain number for this bus. + */ +int pci_domain_nr(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + return hose->global_number; +} +EXPORT_SYMBOL(pci_domain_nr); + +/* This routine is meant to be used early during boot, when the + * PCI bus numbers have not yet been assigned, and you need to + * issue PCI config cycles to an OF device. + * It could also be used to "fix" RTAS config cycles if you want + * to set pci_assign_all_buses to 1 and still use RTAS for PCI + * config cycles. + */ +struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node) +{ + while (node) { + struct pci_controller *hose, *tmp; + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (hose->dn == node) + return hose; + node = node->parent; + } + return NULL; +} + +static ssize_t pci_show_devspec(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; + struct device_node *np; + + pdev = to_pci_dev(dev); + np = pci_device_to_OF_node(pdev); + if (np == NULL || np->full_name == NULL) + return 0; + return sprintf(buf, "%s", np->full_name); +} +static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); + +/* Add sysfs properties */ +int pcibios_add_platform_entries(struct pci_dev *pdev) +{ + return device_create_file(&pdev->dev, &dev_attr_devspec); +} + +char __devinit *pcibios_setup(char *str) +{ + return str; +} + +/* + * Reads the interrupt pin to determine if interrupt is use by card. + * If the interrupt is used, then gets the interrupt line from the + * openfirmware and sets it in the pci_dev and pci_config line. + */ +int pci_read_irq_line(struct pci_dev *pci_dev) +{ + struct of_irq oirq; + unsigned int virq; + + /* The current device-tree that iSeries generates from the HV + * PCI informations doesn't contain proper interrupt routing, + * and all the fallback would do is print out crap, so we + * don't attempt to resolve the interrupts here at all, some + * iSeries specific fixup does it. + * + * In the long run, we will hopefully fix the generated device-tree + * instead. + */ + pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); + +#ifdef DEBUG + memset(&oirq, 0xff, sizeof(oirq)); +#endif + /* Try to get a mapping from the device-tree */ + if (of_irq_map_pci(pci_dev, &oirq)) { + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + return -1; + if (pin == 0) + return -1; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff || line == 0) { + return -1; + } + pr_debug(" No map ! Using line %d (pin %d) from PCI config\n", + line, pin); + + virq = irq_create_mapping(NULL, line); + if (virq != NO_IRQ) + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } else { + pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.specifier[1], + oirq.controller ? oirq.controller->full_name : + "<default>"); + + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + } + if (virq == NO_IRQ) { + pr_debug(" Failed to map !\n"); + return -1; + } + + pr_debug(" Mapped to linux irq %d\n", virq); + + pci_dev->irq = virq; + + return 0; +} +EXPORT_SYMBOL(pci_read_irq_line); + +/* + * Platform support for /proc/bus/pci/X/Y mmap()s, + * modelled on the sparc64 implementation by Dave Miller. + * -- paulus. + */ + +/* + * Adjust vm_pgoff of VMA such that it is the physical page offset + * corresponding to the 32-bit pci bus offset for DEV requested by the user. + * + * Basically, the user finds the base address for his device which he wishes + * to mmap. They read the 32-bit value from the config space base register, + * add whatever PAGE_SIZE multiple offset they wish, and feed this into the + * offset parameter of mmap on /proc/bus/pci/XXX for that device. + * + * Returns negative error code on failure, zero on success. + */ +static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, + resource_size_t *offset, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long io_offset = 0; + int i, res_bit; + + if (hose == 0) + return NULL; /* should never happen */ + + /* If memory, add on the PCI bridge address offset */ + if (mmap_state == pci_mmap_mem) { +#if 0 /* See comment in pci_resource_to_user() for why this is disabled */ + *offset += hose->pci_mem_offset; +#endif + res_bit = IORESOURCE_MEM; + } else { + io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; + *offset += io_offset; + res_bit = IORESOURCE_IO; + } + + /* + * Check that the offset requested corresponds to one of the + * resources of the device. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &dev->resource[i]; + int flags = rp->flags; + + /* treat ROM as memory (should be already) */ + if (i == PCI_ROM_RESOURCE) + flags |= IORESOURCE_MEM; + + /* Active and same type? */ + if ((flags & res_bit) == 0) + continue; + + /* In the range of this resource? */ + if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) + continue; + + /* found it! construct the final physical address */ + if (mmap_state == pci_mmap_io) + *offset += hose->io_base_phys - io_offset; + return rp; + } + + return NULL; +} + +/* + * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci + * device mapping. + */ +static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, + pgprot_t protection, + enum pci_mmap_state mmap_state, + int write_combine) +{ + pgprot_t prot = protection; + + /* Write combine is always 0 on non-memory space mappings. On + * memory space, if the user didn't pass 1, we check for a + * "prefetchable" resource. This is a bit hackish, but we use + * this to workaround the inability of /sysfs to provide a write + * combine bit + */ + if (mmap_state != pci_mmap_mem) + write_combine = 0; + else if (write_combine == 0) { + if (rp->flags & IORESOURCE_PREFETCH) + write_combine = 1; + } + + return pgprot_noncached(prot); +} + +/* + * This one is used by /dev/mem and fbdev who have no clue about the + * PCI device, it tries to find the PCI device first and calls the + * above routine + */ +pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot) +{ + struct pci_dev *pdev = NULL; + struct resource *found = NULL; + resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT; + int i; + + if (page_is_ram(pfn)) + return prot; + + prot = pgprot_noncached(prot); + for_each_pci_dev(pdev) { + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &pdev->resource[i]; + int flags = rp->flags; + + /* Active and same type? */ + if ((flags & IORESOURCE_MEM) == 0) + continue; + /* In the range of this resource? */ + if (offset < (rp->start & PAGE_MASK) || + offset > rp->end) + continue; + found = rp; + break; + } + if (found) + break; + } + if (found) { + if (found->flags & IORESOURCE_PREFETCH) + prot = pgprot_noncached_wc(prot); + pci_dev_put(pdev); + } + + pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n", + (unsigned long long)offset, pgprot_val(prot)); + + return prot; +} + +/* + * Perform the actual remap of the pages for a PCI device mapping, as + * appropriate for this architecture. The region in the process to map + * is described by vm_start and vm_end members of VMA, the base physical + * address is found in vm_pgoff. + * The pci device structure is provided so that architectures may make mapping + * decisions on a per-device or per-bus basis. + * + * Returns a negative error code on failure, zero on success. + */ +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + resource_size_t offset = + ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; + struct resource *rp; + int ret; + + rp = __pci_mmap_make_offset(dev, &offset, mmap_state); + if (rp == NULL) + return -EINVAL; + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, + vma->vm_page_prot, + mmap_state, write_combine); + + ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); + + return ret; +} + +/* This provides legacy IO read access on a bus */ +int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size) +{ + unsigned long offset; + struct pci_controller *hose = pci_bus_to_host(bus); + struct resource *rp = &hose->io_resource; + void __iomem *addr; + + /* Check if port can be supported by that bus. We only check + * the ranges of the PHB though, not the bus itself as the rules + * for forwarding legacy cycles down bridges are not our problem + * here. So if the host bridge supports it, we do it. + */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + offset += port; + + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (offset < rp->start || (offset + size) > rp->end) + return -ENXIO; + addr = hose->io_base_virt + port; + + switch (size) { + case 1: + *((u8 *)val) = in_8(addr); + return 1; + case 2: + if (port & 1) + return -EINVAL; + *((u16 *)val) = in_le16(addr); + return 2; + case 4: + if (port & 3) + return -EINVAL; + *((u32 *)val) = in_le32(addr); + return 4; + } + return -EINVAL; +} + +/* This provides legacy IO write access on a bus */ +int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size) +{ + unsigned long offset; + struct pci_controller *hose = pci_bus_to_host(bus); + struct resource *rp = &hose->io_resource; + void __iomem *addr; + + /* Check if port can be supported by that bus. We only check + * the ranges of the PHB though, not the bus itself as the rules + * for forwarding legacy cycles down bridges are not our problem + * here. So if the host bridge supports it, we do it. + */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + offset += port; + + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (offset < rp->start || (offset + size) > rp->end) + return -ENXIO; + addr = hose->io_base_virt + port; + + /* WARNING: The generic code is idiotic. It gets passed a pointer + * to what can be a 1, 2 or 4 byte quantity and always reads that + * as a u32, which means that we have to correct the location of + * the data read within those 32 bits for size 1 and 2 + */ + switch (size) { + case 1: + out_8(addr, val >> 24); + return 1; + case 2: + if (port & 1) + return -EINVAL; + out_le16(addr, val >> 16); + return 2; + case 4: + if (port & 3) + return -EINVAL; + out_le32(addr, val); + return 4; + } + return -EINVAL; +} + +/* This provides legacy IO or memory mmap access on a bus */ +int pci_mmap_legacy_page_range(struct pci_bus *bus, + struct vm_area_struct *vma, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + resource_size_t offset = + ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; + resource_size_t size = vma->vm_end - vma->vm_start; + struct resource *rp; + + pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n", + pci_domain_nr(bus), bus->number, + mmap_state == pci_mmap_mem ? "MEM" : "IO", + (unsigned long long)offset, + (unsigned long long)(offset + size - 1)); + + if (mmap_state == pci_mmap_mem) { + /* Hack alert ! + * + * Because X is lame and can fail starting if it gets an error + * trying to mmap legacy_mem (instead of just moving on without + * legacy memory access) we fake it here by giving it anonymous + * memory, effectively behaving just like /dev/zero + */ + if ((offset + size) > hose->isa_mem_size) { + printk(KERN_DEBUG + "Process %s (pid:%d) mapped non-existing PCI" + "legacy memory for 0%04x:%02x\n", + current->comm, current->pid, pci_domain_nr(bus), + bus->number); + if (vma->vm_flags & VM_SHARED) + return shmem_zero_setup(vma); + return 0; + } + offset += hose->isa_mem_phys; + } else { + unsigned long io_offset = (unsigned long)hose->io_base_virt - \ + _IO_BASE; + unsigned long roffset = offset + io_offset; + rp = &hose->io_resource; + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (roffset < rp->start || (roffset + size) > rp->end) + return -ENXIO; + offset += hose->io_base_phys; + } + pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset); + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + resource_size_t offset = 0; + + if (hose == NULL) + return; + + if (rsrc->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + + /* We pass a fully fixed up address to userland for MMIO instead of + * a BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem ! + * + * That means that we'll have potentially 64 bits values where some + * userland apps only expect 32 (like X itself since it thinks only + * Sparc has 64 bits MMIO) but if we don't do that, we break it on + * 32 bits CHRPs :-( + * + * Hopefully, the sysfs insterface is immune to that gunk. Once X + * has been fixed (and the fix spread enough), we can re-enable the + * 2 lines below and pass down a BAR value to userland. In that case + * we'll also have to re-enable the matching code in + * __pci_mmap_make_offset(). + * + * BenH. + */ +#if 0 + else if (rsrc->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; +#endif + + *start = rsrc->start - offset; + *end = rsrc->end - offset; +} + +/** + * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree + * @hose: newly allocated pci_controller to be setup + * @dev: device node of the host bridge + * @primary: set if primary bus (32 bits only, soon to be deprecated) + * + * This function will parse the "ranges" property of a PCI host bridge device + * node and setup the resource mapping of a pci controller based on its + * content. + * + * Life would be boring if it wasn't for a few issues that we have to deal + * with here: + * + * - We can only cope with one IO space range and up to 3 Memory space + * ranges. However, some machines (thanks Apple !) tend to split their + * space into lots of small contiguous ranges. So we have to coalesce. + * + * - We can only cope with all memory ranges having the same offset + * between CPU addresses and PCI addresses. Unfortunately, some bridges + * are setup for a large 1:1 mapping along with a small "window" which + * maps PCI address 0 to some arbitrary high address of the CPU space in + * order to give access to the ISA memory hole. + * The way out of here that I've chosen for now is to always set the + * offset based on the first resource found, then override it if we + * have a different offset and the previous was set by an ISA hole. + * + * - Some busses have IO space not starting at 0, which causes trouble with + * the way we do our IO resource renumbering. The code somewhat deals with + * it for 64 bits but I would expect problems on 32 bits. + * + * - Some 32 bits platforms such as 4xx can have physical space larger than + * 32 bits so we need to use 64 bits values for the parsing + */ +void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, + int primary) +{ + const u32 *ranges; + int rlen; + int pna = of_n_addr_cells(dev); + int np = pna + 5; + int memno = 0, isa_hole = -1; + u32 pci_space; + unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; + unsigned long long isa_mb = 0; + struct resource *res; + + printk(KERN_INFO "PCI host bridge %s %s ranges:\n", + dev->full_name, primary ? "(primary)" : ""); + + /* Get ranges property */ + ranges = of_get_property(dev, "ranges", &rlen); + if (ranges == NULL) + return; + + /* Parse it */ + pr_debug("Parsing ranges property...\n"); + while ((rlen -= np * 4) >= 0) { + /* Read next ranges element */ + pci_space = ranges[0]; + pci_addr = of_read_number(ranges + 1, 2); + cpu_addr = of_translate_address(dev, ranges + 3); + size = of_read_number(ranges + pna + 3, 2); + + pr_debug("pci_space: 0x%08x pci_addr:0x%016llx " + "cpu_addr:0x%016llx size:0x%016llx\n", + pci_space, pci_addr, cpu_addr, size); + + ranges += np; + + /* If we failed translation or got a zero-sized region + * (some FW try to feed us with non sensical zero sized regions + * such as power3 which look like some kind of attempt + * at exposing the VGA memory hole) + */ + if (cpu_addr == OF_BAD_ADDR || size == 0) + continue; + + /* Now consume following elements while they are contiguous */ + for (; rlen >= np * sizeof(u32); + ranges += np, rlen -= np * 4) { + if (ranges[0] != pci_space) + break; + pci_next = of_read_number(ranges + 1, 2); + cpu_next = of_translate_address(dev, ranges + 3); + if (pci_next != pci_addr + size || + cpu_next != cpu_addr + size) + break; + size += of_read_number(ranges + pna + 3, 2); + } + + /* Act based on address space type */ + res = NULL; + switch ((pci_space >> 24) & 0x3) { + case 1: /* PCI IO space */ + printk(KERN_INFO + " IO 0x%016llx..0x%016llx -> 0x%016llx\n", + cpu_addr, cpu_addr + size - 1, pci_addr); + + /* We support only one IO range */ + if (hose->pci_io_size) { + printk(KERN_INFO + " \\--> Skipped (too many) !\n"); + continue; + } + /* On 32 bits, limit I/O space to 16MB */ + if (size > 0x01000000) + size = 0x01000000; + + /* 32 bits needs to map IOs here */ + hose->io_base_virt = ioremap(cpu_addr, size); + + /* Expect trouble if pci_addr is not 0 */ + if (primary) + isa_io_base = + (unsigned long)hose->io_base_virt; + /* pci_io_size and io_base_phys always represent IO + * space starting at 0 so we factor in pci_addr + */ + hose->pci_io_size = pci_addr + size; + hose->io_base_phys = cpu_addr - pci_addr; + + /* Build resource */ + res = &hose->io_resource; + res->flags = IORESOURCE_IO; + res->start = pci_addr; + break; + case 2: /* PCI Memory space */ + case 3: /* PCI 64 bits Memory space */ + printk(KERN_INFO + " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", + cpu_addr, cpu_addr + size - 1, pci_addr, + (pci_space & 0x40000000) ? "Prefetch" : ""); + + /* We support only 3 memory ranges */ + if (memno >= 3) { + printk(KERN_INFO + " \\--> Skipped (too many) !\n"); + continue; + } + /* Handles ISA memory hole space here */ + if (pci_addr == 0) { + isa_mb = cpu_addr; + isa_hole = memno; + if (primary || isa_mem_base == 0) + isa_mem_base = cpu_addr; + hose->isa_mem_phys = cpu_addr; + hose->isa_mem_size = size; + } + + /* We get the PCI/Mem offset from the first range or + * the, current one if the offset came from an ISA + * hole. If they don't match, bugger. + */ + if (memno == 0 || + (isa_hole >= 0 && pci_addr != 0 && + hose->pci_mem_offset == isa_mb)) + hose->pci_mem_offset = cpu_addr - pci_addr; + else if (pci_addr != 0 && + hose->pci_mem_offset != cpu_addr - pci_addr) { + printk(KERN_INFO + " \\--> Skipped (offset mismatch) !\n"); + continue; + } + + /* Build resource */ + res = &hose->mem_resources[memno++]; + res->flags = IORESOURCE_MEM; + if (pci_space & 0x40000000) + res->flags |= IORESOURCE_PREFETCH; + res->start = cpu_addr; + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->end = res->start + size - 1; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; + } + } + + /* If there's an ISA hole and the pci_mem_offset is -not- matching + * the ISA hole offset, then we need to remove the ISA hole from + * the resource list for that brige + */ + if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) { + unsigned int next = isa_hole + 1; + printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb); + if (next < memno) + memmove(&hose->mem_resources[isa_hole], + &hose->mem_resources[next], + sizeof(struct resource) * (memno - next)); + hose->mem_resources[--memno].flags = 0; + } +} + +/* Decide whether to display the domain number in /proc */ +int pci_proc_domain(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + if (!(pci_flags & PCI_ENABLE_PROC_DOMAINS)) + return 0; + if (pci_flags & PCI_COMPAT_DOMAIN_0) + return hose->global_number != 0; + return 1; +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + resource_size_t offset = 0, mask = (resource_size_t)-1; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + mask = 0xffffffffu; + } else if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + region->start = (res->start - offset) & mask; + region->end = (res->end - offset) & mask; +} +EXPORT_SYMBOL(pcibios_resource_to_bus); + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + resource_size_t offset = 0, mask = (resource_size_t)-1; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + mask = 0xffffffffu; + } else if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + res->start = (region->start + offset) & mask; + res->end = (region->end + offset) & mask; +} +EXPORT_SYMBOL(pcibios_bus_to_resource); + +/* Fixup a bus resource into a linux resource */ +static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + resource_size_t offset = 0, mask = (resource_size_t)-1; + + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + mask = 0xffffffffu; + } else if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + res->start = (res->start + offset) & mask; + res->end = (res->end + offset) & mask; +} + +/* This header fixup will do the resource fixup for all devices as they are + * probed, but not for bridge ranges + */ +static void __devinit pcibios_fixup_resources(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + int i; + + if (!hose) { + printk(KERN_ERR "No host bridge for PCI dev %s !\n", + pci_name(dev)); + return; + } + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + struct resource *res = dev->resource + i; + if (!res->flags) + continue; + /* On platforms that have PCI_PROBE_ONLY set, we don't + * consider 0 as an unassigned BAR value. It's technically + * a valid value, but linux doesn't like it... so when we can + * re-assign things, we do so, but if we can't, we keep it + * around and hope for the best... + */ + if (res->start == 0 && !(pci_flags & PCI_PROBE_ONLY)) { + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \ + "is unassigned\n", + pci_name(dev), i, + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned int)res->flags); + res->end -= res->start; + res->start = 0; + res->flags |= IORESOURCE_UNSET; + continue; + } + + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n", + pci_name(dev), i, + (unsigned long long)res->start,\ + (unsigned long long)res->end, + (unsigned int)res->flags); + + fixup_resource(res, dev); + + pr_debug("PCI:%s %016llx-%016llx\n", + pci_name(dev), + (unsigned long long)res->start, + (unsigned long long)res->end); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); + +/* This function tries to figure out if a bridge resource has been initialized + * by the firmware or not. It doesn't have to be absolutely bullet proof, but + * things go more smoothly when it gets it right. It should covers cases such + * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges + */ +static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus, + struct resource *res) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pci_dev *dev = bus->self; + resource_size_t offset; + u16 command; + int i; + + /* We don't do anything if PCI_PROBE_ONLY is set */ + if (pci_flags & PCI_PROBE_ONLY) + return 0; + + /* Job is a bit different between memory and IO */ + if (res->flags & IORESOURCE_MEM) { + /* If the BAR is non-0 (res != pci_mem_offset) then it's + * probably been initialized by somebody + */ + if (res->start != hose->pci_mem_offset) + return 0; + + /* The BAR is 0, let's check if memory decoding is enabled on + * the bridge. If not, we consider it unassigned + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if ((command & PCI_COMMAND_MEMORY) == 0) + return 1; + + /* Memory decoding is enabled and the BAR is 0. If any of + * the bridge resources covers that starting address (0 then + * it's good enough for us for memory + */ + for (i = 0; i < 3; i++) { + if ((hose->mem_resources[i].flags & IORESOURCE_MEM) && + hose->mem_resources[i].start == hose->pci_mem_offset) + return 0; + } + + /* Well, it starts at 0 and we know it will collide so we may as + * well consider it as unassigned. That covers the Apple case. + */ + return 1; + } else { + /* If the BAR is non-0, then we consider it assigned */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + if (((res->start - offset) & 0xfffffffful) != 0) + return 0; + + /* Here, we are a bit different than memory as typically IO + * space starting at low addresses -is- valid. What we do + * instead if that we consider as unassigned anything that + * doesn't have IO enabled in the PCI command register, + * and that's it. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_IO) + return 0; + + /* It's starting at 0 and IO is disabled in the bridge, consider + * it unassigned + */ + return 1; + } +} + +/* Fixup resources of a PCI<->PCI bridge */ +static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) +{ + struct resource *res; + int i; + + struct pci_dev *dev = bus->self; + + for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + res = bus->resource[i]; + if (!res) + continue; + if (!res->flags) + continue; + if (i >= 3 && bus->self->transparent) + continue; + + pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n", + pci_name(dev), i, + (unsigned long long)res->start,\ + (unsigned long long)res->end, + (unsigned int)res->flags); + + /* Perform fixup */ + fixup_resource(res, dev); + + /* Try to detect uninitialized P2P bridge resources, + * and clear them out so they get re-assigned later + */ + if (pcibios_uninitialized_bridge_resource(bus, res)) { + res->flags = 0; + pr_debug("PCI:%s (unassigned)\n", + pci_name(dev)); + } else { + pr_debug("PCI:%s %016llx-%016llx\n", + pci_name(dev), + (unsigned long long)res->start, + (unsigned long long)res->end); + } + } +} + +void __devinit pcibios_setup_bus_self(struct pci_bus *bus) +{ + /* Fix up the bus resources for P2P bridges */ + if (bus->self != NULL) + pcibios_fixup_bridge(bus); +} + +void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) +{ + struct pci_dev *dev; + + pr_debug("PCI: Fixup bus devices %d (%s)\n", + bus->number, bus->self ? pci_name(bus->self) : "PHB"); + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct dev_archdata *sd = &dev->dev.archdata; + + /* Setup OF node pointer in archdata */ + sd->of_node = pci_device_to_OF_node(dev); + + /* Fixup NUMA node as it may not be setup yet by the generic + * code and is needed by the DMA init + */ + set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); + + /* Hook up default DMA ops */ + sd->dma_ops = pci_dma_ops; + sd->dma_data = (void *)PCI_DRAM_OFFSET; + + /* Read default IRQs and fixup if necessary */ + pci_read_irq_line(dev); + } +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + /* When called from the generic PCI probe, read PCI<->PCI bridge + * bases. This is -not- called when generating the PCI tree from + * the OF device-tree. + */ + if (bus->self != NULL) + pci_read_bridge_bases(bus); + + /* Now fixup the bus bus */ + pcibios_setup_bus_self(bus); + + /* Now fixup devices on that bus */ + pcibios_setup_bus_devices(bus); +} +EXPORT_SYMBOL(pcibios_fixup_bus); + +static int skip_isa_ioresource_align(struct pci_dev *dev) +{ + if ((pci_flags & PCI_CAN_SKIP_ISA_ALIGN) && + !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA)) + return 1; + return 0; +} + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + + if (res->flags & IORESOURCE_IO) { + resource_size_t start = res->start; + + if (skip_isa_ioresource_align(dev)) + return; + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} +EXPORT_SYMBOL(pcibios_align_resource); + +/* + * Reparent resource children of pr that conflict with res + * under res, and make res replace those children. + */ +static int __init reparent_resources(struct resource *parent, + struct resource *res) +{ + struct resource *p, **pp; + struct resource **firstpp = NULL; + + for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { + if (p->end < res->start) + continue; + if (res->end < p->start) + break; + if (p->start < res->start || p->end > res->end) + return -1; /* not completely contained */ + if (firstpp == NULL) + firstpp = pp; + } + if (firstpp == NULL) + return -1; /* didn't find any conflicting entries? */ + res->parent = parent; + res->child = *firstpp; + res->sibling = *pp; + *firstpp = res; + *pp = NULL; + for (p = res->child; p != NULL; p = p->sibling) { + p->parent = res; + pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n", + p->name, + (unsigned long long)p->start, + (unsigned long long)p->end, res->name); + } + return 0; +} + +/* + * Handle resources of PCI devices. If the world were perfect, we could + * just allocate all the resource regions and do nothing more. It isn't. + * On the other hand, we cannot just re-allocate all devices, as it would + * require us to know lots of host bridge internals. So we attempt to + * keep as much of the original configuration as possible, but tweak it + * when it's found to be wrong. + * + * Known BIOS problems we have to work around: + * - I/O or memory regions not configured + * - regions configured, but not enabled in the command register + * - bogus I/O addresses above 64K used + * - expansion ROMs left enabled (this may sound harmless, but given + * the fact the PCI specs explicitly allow address decoders to be + * shared between expansion ROMs and other resource regions, it's + * at least dangerous) + * + * Our solution: + * (1) Allocate resources for all buses behind PCI-to-PCI bridges. + * This gives us fixed barriers on where we can allocate. + * (2) Allocate resources for all enabled devices. If there is + * a collision, just mark the resource as unallocated. Also + * disable expansion ROMs during this step. + * (3) Try to allocate resources for disabled devices. If the + * resources were assigned correctly, everything goes well, + * if they weren't, they won't disturb allocation of other + * resources. + * (4) Assign new addresses to resources which were either + * not configured at all or misconfigured. If explicitly + * requested by the user, configure expansion ROM address + * as well. + */ + +void pcibios_allocate_bus_resources(struct pci_bus *bus) +{ + struct pci_bus *b; + int i; + struct resource *res, *pr; + + pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", + pci_domain_nr(bus), bus->number); + + for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) { + res = bus->resource[i]; + if (!res || !res->flags + || res->start > res->end || res->parent) + continue; + if (bus->parent == NULL) + pr = (res->flags & IORESOURCE_IO) ? + &ioport_resource : &iomem_resource; + else { + /* Don't bother with non-root busses when + * re-assigning all resources. We clear the + * resource flags as if they were colliding + * and as such ensure proper re-allocation + * later. + */ + if (pci_flags & PCI_REASSIGN_ALL_RSRC) + goto clear_resource; + pr = pci_find_parent_resource(bus->self, res); + if (pr == res) { + /* this happens when the generic PCI + * code (wrongly) decides that this + * bridge is transparent -- paulus + */ + continue; + } + } + + pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx " + "[0x%x], parent %p (%s)\n", + bus->self ? pci_name(bus->self) : "PHB", + bus->number, i, + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned int)res->flags, + pr, (pr && pr->name) ? pr->name : "nil"); + + if (pr && !(pr->flags & IORESOURCE_UNSET)) { + if (request_resource(pr, res) == 0) + continue; + /* + * Must be a conflict with an existing entry. + * Move that entry (or entries) under the + * bridge resource and try again. + */ + if (reparent_resources(pr, res) == 0) + continue; + } + printk(KERN_WARNING "PCI: Cannot allocate resource region " + "%d of PCI bridge %d, will remap\n", i, bus->number); +clear_resource: + res->flags = 0; + } + + list_for_each_entry(b, &bus->children, node) + pcibios_allocate_bus_resources(b); +} + +static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) +{ + struct resource *pr, *r = &dev->resource[idx]; + + pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n", + pci_name(dev), idx, + (unsigned long long)r->start, + (unsigned long long)r->end, + (unsigned int)r->flags); + + pr = pci_find_parent_resource(dev, r); + if (!pr || (pr->flags & IORESOURCE_UNSET) || + request_resource(pr, r) < 0) { + printk(KERN_WARNING "PCI: Cannot allocate resource region %d" + " of device %s, will remap\n", idx, pci_name(dev)); + if (pr) + pr_debug("PCI: parent is %p: %016llx-%016llx [%x]\n", + pr, + (unsigned long long)pr->start, + (unsigned long long)pr->end, + (unsigned int)pr->flags); + /* We'll assign a new address later */ + r->flags |= IORESOURCE_UNSET; + r->end -= r->start; + r->start = 0; + } +} + +static void __init pcibios_allocate_resources(int pass) +{ + struct pci_dev *dev = NULL; + int idx, disabled; + u16 command; + struct resource *r; + + for_each_pci_dev(dev) { + pci_read_config_word(dev, PCI_COMMAND, &command); + for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { + r = &dev->resource[idx]; + if (r->parent) /* Already allocated */ + continue; + if (!r->flags || (r->flags & IORESOURCE_UNSET)) + continue; /* Not assigned at all */ + /* We only allocate ROMs on pass 1 just in case they + * have been screwed up by firmware + */ + if (idx == PCI_ROM_RESOURCE) + disabled = 1; + if (r->flags & IORESOURCE_IO) + disabled = !(command & PCI_COMMAND_IO); + else + disabled = !(command & PCI_COMMAND_MEMORY); + if (pass == disabled) + alloc_resource(dev, idx); + } + if (pass) + continue; + r = &dev->resource[PCI_ROM_RESOURCE]; + if (r->flags) { + /* Turn the ROM off, leave the resource region, + * but keep it unregistered. + */ + u32 reg; + pci_read_config_dword(dev, dev->rom_base_reg, ®); + if (reg & PCI_ROM_ADDRESS_ENABLE) { + pr_debug("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } + } + } +} + +static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + resource_size_t offset; + struct resource *res, *pres; + int i; + + pr_debug("Reserving legacy ranges for domain %04x\n", + pci_domain_nr(bus)); + + /* Check for IO */ + if (!(hose->io_resource.flags & IORESOURCE_IO)) + goto no_io; + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + BUG_ON(res == NULL); + res->name = "Legacy IO"; + res->flags = IORESOURCE_IO; + res->start = offset; + res->end = (offset + 0xfff) & 0xfffffffful; + pr_debug("Candidate legacy IO: %pR\n", res); + if (request_resource(&hose->io_resource, res)) { + printk(KERN_DEBUG + "PCI %04x:%02x Cannot reserve Legacy IO %pR\n", + pci_domain_nr(bus), bus->number, res); + kfree(res); + } + + no_io: + /* Check for memory */ + offset = hose->pci_mem_offset; + pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset); + for (i = 0; i < 3; i++) { + pres = &hose->mem_resources[i]; + if (!(pres->flags & IORESOURCE_MEM)) + continue; + pr_debug("hose mem res: %pR\n", pres); + if ((pres->start - offset) <= 0xa0000 && + (pres->end - offset) >= 0xbffff) + break; + } + if (i >= 3) + return; + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + BUG_ON(res == NULL); + res->name = "Legacy VGA memory"; + res->flags = IORESOURCE_MEM; + res->start = 0xa0000 + offset; + res->end = 0xbffff + offset; + pr_debug("Candidate VGA memory: %pR\n", res); + if (request_resource(pres, res)) { + printk(KERN_DEBUG + "PCI %04x:%02x Cannot reserve VGA memory %pR\n", + pci_domain_nr(bus), bus->number, res); + kfree(res); + } +} + +void __init pcibios_resource_survey(void) +{ + struct pci_bus *b; + + /* Allocate and assign resources. If we re-assign everything, then + * we skip the allocate phase + */ + list_for_each_entry(b, &pci_root_buses, node) + pcibios_allocate_bus_resources(b); + + if (!(pci_flags & PCI_REASSIGN_ALL_RSRC)) { + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); + } + + /* Before we start assigning unassigned resource, we try to reserve + * the low IO area and the VGA memory area if they intersect the + * bus available resources to avoid allocating things on top of them + */ + if (!(pci_flags & PCI_PROBE_ONLY)) { + list_for_each_entry(b, &pci_root_buses, node) + pcibios_reserve_legacy_regions(b); + } + + /* Now, if the platform didn't decide to blindly trust the firmware, + * we proceed to assigning things that were left unassigned + */ + if (!(pci_flags & PCI_PROBE_ONLY)) { + pr_debug("PCI: Assigning unassigned resources...\n"); + pci_assign_unassigned_resources(); + } +} + +#ifdef CONFIG_HOTPLUG + +/* This is used by the PCI hotplug driver to allocate resource + * of newly plugged busses. We can try to consolidate with the + * rest of the code later, for now, keep it as-is as our main + * resource allocation function doesn't deal with sub-trees yet. + */ +void __devinit pcibios_claim_one_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + struct pci_bus *child_bus; + + list_for_each_entry(dev, &bus->devices, bus_list) { + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (r->parent || !r->start || !r->flags) + continue; + + pr_debug("PCI: Claiming %s: " + "Resource %d: %016llx..%016llx [%x]\n", + pci_name(dev), i, + (unsigned long long)r->start, + (unsigned long long)r->end, + (unsigned int)r->flags); + + pci_claim_resource(dev, i); + } + } + + list_for_each_entry(child_bus, &bus->children, node) + pcibios_claim_one_bus(child_bus); +} +EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); + + +/* pcibios_finish_adding_to_bus + * + * This is to be called by the hotplug code after devices have been + * added to a bus, this include calling it for a PHB that is just + * being added + */ +void pcibios_finish_adding_to_bus(struct pci_bus *bus) +{ + pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); + + /* Allocate bus and devices resources */ + pcibios_allocate_bus_resources(bus); + pcibios_claim_one_bus(bus); + + /* Add new devices to global lists. Register in proc, sysfs. */ + pci_bus_add_devices(bus); + + /* Fixup EEH */ + eeh_add_device_tree_late(bus); +} +EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); + +#endif /* CONFIG_HOTPLUG */ + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + return pci_enable_resources(dev, mask); +} + +void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) +{ + struct pci_bus *bus = hose->bus; + struct resource *res; + int i; + + /* Hookup PHB IO resource */ + bus->resource[0] = res = &hose->io_resource; + + if (!res->flags) { + printk(KERN_WARNING "PCI: I/O resource not set for host" + " bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); + /* Workaround for lack of IO resource only on 32-bit */ + res->start = (unsigned long)hose->io_base_virt - isa_io_base; + res->end = res->start + IO_SPACE_LIMIT; + res->flags = IORESOURCE_IO; + } + + pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n", + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned long)res->flags); + + /* Hookup PHB Memory resources */ + for (i = 0; i < 3; ++i) { + res = &hose->mem_resources[i]; + if (!res->flags) { + if (i > 0) + continue; + printk(KERN_ERR "PCI: Memory resource 0 not set for " + "host bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); + + /* Workaround for lack of MEM resource only on 32-bit */ + res->start = hose->pci_mem_offset; + res->end = (resource_size_t)-1LL; + res->flags = IORESOURCE_MEM; + + } + bus->resource[i+1] = res; + + pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", + i, (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned long)res->flags); + } + + pr_debug("PCI: PHB MEM offset = %016llx\n", + (unsigned long long)hose->pci_mem_offset); + pr_debug("PCI: PHB IO offset = %08lx\n", + (unsigned long)hose->io_base_virt - _IO_BASE); +} + +/* + * Null PCI config access functions, for the case when we can't + * find a hose. + */ +#define NULL_PCI_OP(rw, size, type) \ +static int \ +null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ +{ \ + return PCIBIOS_DEVICE_NOT_FOUND; \ +} + +static int +null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int +null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops null_pci_ops = { + .read = null_read_config, + .write = null_write_config, +}; + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_bus * +fake_pci_bus(struct pci_controller *hose, int busnr) +{ + static struct pci_bus bus; + + if (!hose) + printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose ? hose->ops : &null_pci_ops; + return &bus; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ + int devfn, int offset, type value) \ +{ \ + return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ + devfn, offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c new file mode 100644 index 000000000000..7e0c94f501cc --- /dev/null +++ b/arch/microblaze/pci/pci_32.c @@ -0,0 +1,430 @@ +/* + * Common pmac/prep/chrp pci routines. -- Cort + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/capability.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/list.h> +#include <linux/of.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/sections.h> +#include <asm/pci-bridge.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +#undef DEBUG + +unsigned long isa_io_base; +unsigned long pci_dram_offset; +int pcibios_assign_bus_offset = 1; + +static u8 *pci_to_OF_bus_map; + +/* By default, we don't re-assign bus numbers. We do this only on + * some pmacs + */ +static int pci_assign_all_buses; + +static int pci_bus_count; + +/* + * Functions below are used on OpenFirmware machines. + */ +static void +make_one_node_map(struct device_node *node, u8 pci_bus) +{ + const int *bus_range; + int len; + + if (pci_bus >= pci_bus_count) + return; + bus_range = of_get_property(node, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, " + "assuming it starts at 0\n", node->full_name); + pci_to_OF_bus_map[pci_bus] = 0; + } else + pci_to_OF_bus_map[pci_bus] = bus_range[0]; + + for_each_child_of_node(node, node) { + struct pci_dev *dev; + const unsigned int *class_code, *reg; + + class_code = of_get_property(node, "class-code", NULL); + if (!class_code || + ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + reg = of_get_property(node, "reg", NULL); + if (!reg) + continue; + dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff)); + if (!dev || !dev->subordinate) { + pci_dev_put(dev); + continue; + } + make_one_node_map(node, dev->subordinate->number); + pci_dev_put(dev); + } +} + +void +pcibios_make_OF_bus_map(void) +{ + int i; + struct pci_controller *hose, *tmp; + struct property *map_prop; + struct device_node *dn; + + pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL); + if (!pci_to_OF_bus_map) { + printk(KERN_ERR "Can't allocate OF bus map !\n"); + return; + } + + /* We fill the bus map with invalid values, that helps + * debugging. + */ + for (i = 0; i < pci_bus_count; i++) + pci_to_OF_bus_map[i] = 0xff; + + /* For each hose, we begin searching bridges */ + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + struct device_node *node = hose->dn; + + if (!node) + continue; + make_one_node_map(node, hose->first_busno); + } + dn = of_find_node_by_path("/"); + map_prop = of_find_property(dn, "pci-OF-bus-map", NULL); + if (map_prop) { + BUG_ON(pci_bus_count > map_prop->length); + memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count); + } + of_node_put(dn); +#ifdef DEBUG + printk(KERN_INFO "PCI->OF bus map:\n"); + for (i = 0; i < pci_bus_count; i++) { + if (pci_to_OF_bus_map[i] == 0xff) + continue; + printk(KERN_INFO "%d -> %d\n", i, pci_to_OF_bus_map[i]); + } +#endif +} + +typedef int (*pci_OF_scan_iterator)(struct device_node *node, void *data); + +static struct device_node *scan_OF_pci_childs(struct device_node *parent, + pci_OF_scan_iterator filter, void *data) +{ + struct device_node *node; + struct device_node *sub_node; + + for_each_child_of_node(parent, node) { + const unsigned int *class_code; + + if (filter(node, data)) { + of_node_put(node); + return node; + } + + /* For PCI<->PCI bridges or CardBus bridges, we go down + * Note: some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function device, + * we go down them as well. + */ + class_code = of_get_property(node, "class-code", NULL); + if ((!class_code || + ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && + strcmp(node->name, "multifunc-device")) + continue; + sub_node = scan_OF_pci_childs(node, filter, data); + if (sub_node) { + of_node_put(node); + return sub_node; + } + } + return NULL; +} + +static struct device_node *scan_OF_for_pci_dev(struct device_node *parent, + unsigned int devfn) +{ + struct device_node *np, *cnp; + const u32 *reg; + unsigned int psize; + + for_each_child_of_node(parent, np) { + reg = of_get_property(np, "reg", &psize); + if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn) + return np; + + /* Note: some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function device, + * we go down them as well. */ + if (!strcmp(np->name, "multifunc-device")) { + cnp = scan_OF_for_pci_dev(np, devfn); + if (cnp) + return cnp; + } + } + return NULL; +} + + +static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus) +{ + struct device_node *parent, *np; + + /* Are we a root bus ? */ + if (bus->self == NULL || bus->parent == NULL) { + struct pci_controller *hose = pci_bus_to_host(bus); + if (hose == NULL) + return NULL; + return of_node_get(hose->dn); + } + + /* not a root bus, we need to get our parent */ + parent = scan_OF_for_pci_bus(bus->parent); + if (parent == NULL) + return NULL; + + /* now iterate for children for a match */ + np = scan_OF_for_pci_dev(parent, bus->self->devfn); + of_node_put(parent); + + return np; +} + +/* + * Scans the OF tree for a device node matching a PCI device + */ +struct device_node * +pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) +{ + struct device_node *parent, *np; + + pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn); + parent = scan_OF_for_pci_bus(bus); + if (parent == NULL) + return NULL; + pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>"); + np = scan_OF_for_pci_dev(parent, devfn); + of_node_put(parent); + pr_debug(" result is %s\n", np ? np->full_name : "<NULL>"); + + /* XXX most callers don't release the returned node + * mostly because ppc64 doesn't increase the refcount, + * we need to fix that. + */ + return np; +} +EXPORT_SYMBOL(pci_busdev_to_OF_node); + +struct device_node* +pci_device_to_OF_node(struct pci_dev *dev) +{ + return pci_busdev_to_OF_node(dev->bus, dev->devfn); +} +EXPORT_SYMBOL(pci_device_to_OF_node); + +static int +find_OF_pci_device_filter(struct device_node *node, void *data) +{ + return ((void *)node == data); +} + +/* + * Returns the PCI device matching a given OF node + */ +int +pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn) +{ + const unsigned int *reg; + struct pci_controller *hose; + struct pci_dev *dev = NULL; + + /* Make sure it's really a PCI device */ + hose = pci_find_hose_for_OF_device(node); + if (!hose || !hose->dn) + return -ENODEV; + if (!scan_OF_pci_childs(hose->dn, + find_OF_pci_device_filter, (void *)node)) + return -ENODEV; + reg = of_get_property(node, "reg", NULL); + if (!reg) + return -ENODEV; + *bus = (reg[0] >> 16) & 0xff; + *devfn = ((reg[0] >> 8) & 0xff); + + /* Ok, here we need some tweak. If we have already renumbered + * all busses, we can't rely on the OF bus number any more. + * the pci_to_OF_bus_map is not enough as several PCI busses + * may match the same OF bus number. + */ + if (!pci_to_OF_bus_map) + return 0; + + for_each_pci_dev(dev) + if (pci_to_OF_bus_map[dev->bus->number] == *bus && + dev->devfn == *devfn) { + *bus = dev->bus->number; + pci_dev_put(dev); + return 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(pci_device_from_OF_node); + +/* We create the "pci-OF-bus-map" property now so it appears in the + * /proc device tree + */ +void __init +pci_create_OF_bus_map(void) +{ + struct property *of_prop; + struct device_node *dn; + + of_prop = (struct property *) alloc_bootmem(sizeof(struct property) + \ + 256); + if (!of_prop) + return; + dn = of_find_node_by_path("/"); + if (dn) { + memset(of_prop, -1, sizeof(struct property) + 256); + of_prop->name = "pci-OF-bus-map"; + of_prop->length = 256; + of_prop->value = &of_prop[1]; + prom_add_property(dn, of_prop); + of_node_put(dn); + } +} + +static void __devinit pcibios_scan_phb(struct pci_controller *hose) +{ + struct pci_bus *bus; + struct device_node *node = hose->dn; + unsigned long io_offset; + struct resource *res = &hose->io_resource; + + pr_debug("PCI: Scanning PHB %s\n", + node ? node->full_name : "<NO NAME>"); + + /* Create an empty bus for the toplevel */ + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); + if (bus == NULL) { + printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + /* Fixup IO space offset */ + io_offset = (unsigned long)hose->io_base_virt - isa_io_base; + res->start = (res->start + io_offset) & 0xffffffffu; + res->end = (res->end + io_offset) & 0xffffffffu; + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose); + + /* Scan children */ + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); +} + +static int __init pcibios_init(void) +{ + struct pci_controller *hose, *tmp; + int next_busno = 0; + + printk(KERN_INFO "PCI: Probing PCI hardware\n"); + + if (pci_flags & PCI_REASSIGN_ALL_BUS) { + printk(KERN_INFO "setting pci_asign_all_busses\n"); + pci_assign_all_buses = 1; + } + + /* Scan all of the recorded PCI controllers. */ + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + if (pci_assign_all_buses) + hose->first_busno = next_busno; + hose->last_busno = 0xff; + pcibios_scan_phb(hose); + printk(KERN_INFO "calling pci_bus_add_devices()\n"); + pci_bus_add_devices(hose->bus); + if (pci_assign_all_buses || next_busno <= hose->last_busno) + next_busno = hose->last_busno + \ + pcibios_assign_bus_offset; + } + pci_bus_count = next_busno; + + /* OpenFirmware based machines need a map of OF bus + * numbers vs. kernel bus numbers since we may have to + * remap them. + */ + if (pci_assign_all_buses) + pcibios_make_OF_bus_map(); + + /* Call common code to handle resource allocation */ + pcibios_resource_survey(); + + return 0; +} + +subsys_initcall(pcibios_init); + +static struct pci_controller* +pci_bus_to_hose(int bus) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (bus >= hose->first_busno && bus <= hose->last_busno) + return hose; + return NULL; +} + +/* Provide information on locations of various I/O regions in physical + * memory. Do this on a per-card basis so that we choose the right + * root bridge. + * Note that the returned IO or memory base is a physical address + */ + +long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) +{ + struct pci_controller *hose; + long result = -EOPNOTSUPP; + + hose = pci_bus_to_hose(bus); + if (!hose) + return -ENODEV; + + switch (which) { + case IOBASE_BRIDGE_NUMBER: + return (long)hose->first_busno; + case IOBASE_MEMORY: + return (long)hose->pci_mem_offset; + case IOBASE_IO: + return (long)hose->io_base_phys; + case IOBASE_ISA_IO: + return (long)isa_io_base; + case IOBASE_ISA_MEM: + return (long)isa_mem_base; + } + + return result; +} |