diff options
| -rw-r--r-- | arch/tile/Kconfig | 2 | ||||
| -rw-r--r-- | arch/tile/Makefile | 2 | ||||
| -rw-r--r-- | arch/tile/gxio/Kconfig | 5 | ||||
| -rw-r--r-- | arch/tile/gxio/Makefile | 5 | ||||
| -rw-r--r-- | arch/tile/gxio/iorpc_globals.c | 89 | ||||
| -rw-r--r-- | arch/tile/gxio/kiorpc.c | 61 | ||||
| -rw-r--r-- | arch/tile/include/gxio/common.h | 40 | ||||
| -rw-r--r-- | arch/tile/include/gxio/iorpc_globals.h | 38 | ||||
| -rw-r--r-- | arch/tile/include/gxio/kiorpc.h | 29 | ||||
| -rw-r--r-- | arch/tile/include/hv/iorpc.h | 714 |
10 files changed, 985 insertions, 0 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index fe128816c448..645979cfb718 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -345,6 +345,8 @@ config KERNEL_PL kernel will be built to run at. Generally you should use the default value here. +source "arch/tile/gxio/Kconfig" + endmenu # Tilera-specific configuration menu "Bus options" diff --git a/arch/tile/Makefile b/arch/tile/Makefile index e20b0a0b64a1..55640cf92597 100644 --- a/arch/tile/Makefile +++ b/arch/tile/Makefile @@ -59,6 +59,8 @@ libs-y += $(LIBGCC_PATH) # See arch/tile/Kbuild for content of core part of the kernel core-y += arch/tile/ +core-$(CONFIG_TILE_GXIO) += arch/tile/gxio/ + ifdef TILERA_ROOT INSTALL_PATH ?= $(TILERA_ROOT)/tile/boot endif diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig new file mode 100644 index 000000000000..8eff47fe1236 --- /dev/null +++ b/arch/tile/gxio/Kconfig @@ -0,0 +1,5 @@ +# Support direct access to TILE-Gx hardware from user space, via the +# gxio library, or from kernel space, via kernel IORPC support. +config TILE_GXIO + bool + depends on TILEGX diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile new file mode 100644 index 000000000000..db1ee2863d8e --- /dev/null +++ b/arch/tile/gxio/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Tile-Gx device access support. +# + +obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o diff --git a/arch/tile/gxio/iorpc_globals.c b/arch/tile/gxio/iorpc_globals.c new file mode 100644 index 000000000000..e178e90805a2 --- /dev/null +++ b/arch/tile/gxio/iorpc_globals.c @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#include "gxio/iorpc_globals.h" + +struct arm_pollfd_param { + union iorpc_pollfd pollfd; +}; + +int __iorpc_arm_pollfd(int fd, int pollfd_cookie) +{ + struct arm_pollfd_param temp; + struct arm_pollfd_param *params = &temp; + + params->pollfd.kernel.cookie = pollfd_cookie; + + return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_ARM_POLLFD); +} + +EXPORT_SYMBOL(__iorpc_arm_pollfd); + +struct close_pollfd_param { + union iorpc_pollfd pollfd; +}; + +int __iorpc_close_pollfd(int fd, int pollfd_cookie) +{ + struct close_pollfd_param temp; + struct close_pollfd_param *params = &temp; + + params->pollfd.kernel.cookie = pollfd_cookie; + + return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_CLOSE_POLLFD); +} + +EXPORT_SYMBOL(__iorpc_close_pollfd); + +struct get_mmio_base_param { + HV_PTE base; +}; + +int __iorpc_get_mmio_base(int fd, HV_PTE *base) +{ + int __result; + struct get_mmio_base_param temp; + struct get_mmio_base_param *params = &temp; + + __result = + hv_dev_pread(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_GET_MMIO_BASE); + *base = params->base; + + return __result; +} + +EXPORT_SYMBOL(__iorpc_get_mmio_base); + +struct check_mmio_offset_param { + unsigned long offset; + unsigned long size; +}; + +int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size) +{ + struct check_mmio_offset_param temp; + struct check_mmio_offset_param *params = &temp; + + params->offset = offset; + params->size = size; + + return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_CHECK_MMIO_OFFSET); +} + +EXPORT_SYMBOL(__iorpc_check_mmio_offset); diff --git a/arch/tile/gxio/kiorpc.c b/arch/tile/gxio/kiorpc.c new file mode 100644 index 000000000000..c8096aa5a3fc --- /dev/null +++ b/arch/tile/gxio/kiorpc.c @@ -0,0 +1,61 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * TILE-Gx IORPC support for kernel I/O drivers. + */ + +#include <linux/mmzone.h> +#include <linux/module.h> +#include <linux/io.h> +#include <gxio/iorpc_globals.h> +#include <gxio/kiorpc.h> + +#ifdef DEBUG_IORPC +#define TRACE(FMT, ...) pr_info(SIMPLE_MSG_LINE FMT, ## __VA_ARGS__) +#else +#define TRACE(...) +#endif + +/* Create kernel-VA-space MMIO mapping for an on-chip IO device. */ +void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset, + unsigned long size) +{ + pgprot_t mmio_base, prot = { 0 }; + unsigned long pfn; + int err; + + /* Look up the shim's lotar and base PA. */ + err = __iorpc_get_mmio_base(hv_fd, &mmio_base); + if (err) { + TRACE("get_mmio_base() failure: %d\n", err); + return NULL; + } + + /* Make sure the HV driver approves of our offset and size. */ + err = __iorpc_check_mmio_offset(hv_fd, offset, size); + if (err) { + TRACE("check_mmio_offset() failure: %d\n", err); + return NULL; + } + + /* + * mmio_base contains a base pfn and homing coordinates. Turn + * it into an MMIO pgprot and offset pfn. + */ + prot = hv_pte_set_lotar(prot, hv_pte_get_lotar(mmio_base)); + pfn = pte_pfn(mmio_base) + PFN_DOWN(offset); + + return ioremap_prot(PFN_PHYS(pfn), size, prot); +} + +EXPORT_SYMBOL(iorpc_ioremap); diff --git a/arch/tile/include/gxio/common.h b/arch/tile/include/gxio/common.h new file mode 100644 index 000000000000..724595a24d04 --- /dev/null +++ b/arch/tile/include/gxio/common.h @@ -0,0 +1,40 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _GXIO_COMMON_H_ +#define _GXIO_COMMON_H_ + +/* + * Routines shared between the various GXIO device components. + */ + +#include <hv/iorpc.h> + +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/io.h> + +/* Define the standard gxio MMIO functions using kernel functions. */ +#define __gxio_mmio_read8(addr) readb(addr) +#define __gxio_mmio_read16(addr) readw(addr) +#define __gxio_mmio_read32(addr) readl(addr) +#define __gxio_mmio_read64(addr) readq(addr) +#define __gxio_mmio_write8(addr, val) writeb((val), (addr)) +#define __gxio_mmio_write16(addr, val) writew((val), (addr)) +#define __gxio_mmio_write32(addr, val) writel((val), (addr)) +#define __gxio_mmio_write64(addr, val) writeq((val), (addr)) +#define __gxio_mmio_read(addr) __gxio_mmio_read64(addr) +#define __gxio_mmio_write(addr, val) __gxio_mmio_write64((addr), (val)) + +#endif /* !_GXIO_COMMON_H_ */ diff --git a/arch/tile/include/gxio/iorpc_globals.h b/arch/tile/include/gxio/iorpc_globals.h new file mode 100644 index 000000000000..52c721f8dad9 --- /dev/null +++ b/arch/tile/include/gxio/iorpc_globals.h @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#ifndef __IORPC_LINUX_RPC_H__ +#define __IORPC_LINUX_RPC_H__ + +#include <hv/iorpc.h> + +#include <linux/string.h> +#include <linux/module.h> +#include <asm/pgtable.h> + +#define IORPC_OP_ARM_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000) +#define IORPC_OP_CLOSE_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001) +#define IORPC_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) +#define IORPC_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) + +int __iorpc_arm_pollfd(int fd, int pollfd_cookie); + +int __iorpc_close_pollfd(int fd, int pollfd_cookie); + +int __iorpc_get_mmio_base(int fd, HV_PTE *base); + +int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size); + +#endif /* !__IORPC_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/kiorpc.h b/arch/tile/include/gxio/kiorpc.h new file mode 100644 index 000000000000..ee5820979ff3 --- /dev/null +++ b/arch/tile/include/gxio/kiorpc.h @@ -0,0 +1,29 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Support routines for kernel IORPC drivers. + */ + +#ifndef _GXIO_KIORPC_H +#define _GXIO_KIORPC_H + +#include <linux/types.h> +#include <asm/page.h> +#include <arch/chip.h> + +#if CHIP_HAS_MMIO() +void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset, + unsigned long size); +#endif + +#endif /* _GXIO_KIORPC_H */ diff --git a/arch/tile/include/hv/iorpc.h b/arch/tile/include/hv/iorpc.h new file mode 100644 index 000000000000..89c72a5d9341 --- /dev/null +++ b/arch/tile/include/hv/iorpc.h @@ -0,0 +1,714 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ +#ifndef _HV_IORPC_H_ +#define _HV_IORPC_H_ + +/** + * + * Error codes and struct definitions for the IO RPC library. + * + * The hypervisor's IO RPC component provides a convenient way for + * driver authors to proxy system calls between user space, linux, and + * the hypervisor driver. The core of the system is a set of Python + * files that take ".idl" files as input and generates the following + * source code: + * + * - _rpc_call() routines for use in userspace IO libraries. These + * routines take an argument list specified in the .idl file, pack the + * arguments in to a buffer, and read or write that buffer via the + * Linux iorpc driver. + * + * - dispatch_read() and dispatch_write() routines that hypervisor + * drivers can use to implement most of their dev_pread() and + * dev_pwrite() methods. These routines decode the incoming parameter + * blob, permission check and translate parameters where appropriate, + * and then invoke a callback routine for whichever RPC call has + * arrived. The driver simply implements the set of callback + * routines. + * + * The IO RPC system also includes the Linux 'iorpc' driver, which + * proxies calls between the userspace library and the hypervisor + * driver. The Linux driver is almost entirely device agnostic; it + * watches for special flags indicating cases where a memory buffer + * address might need to be translated, etc. As a result, driver + * writers can avoid many of the problem cases related to registering + * hardware resources like memory pages or interrupts. However, the + * drivers must be careful to obey the conventions documented below in + * order to work properly with the generic Linux iorpc driver. + * + * @section iorpc_domains Service Domains + * + * All iorpc-based drivers must support a notion of service domains. + * A service domain is basically an application context - state + * indicating resources that are allocated to that particular app + * which it may access and (perhaps) other applications may not + * access. Drivers can support any number of service domains they + * choose. In some cases the design is limited by a number of service + * domains supported by the IO hardware; in other cases the service + * domains are a purely software concept and the driver chooses a + * maximum number of domains based on how much state memory it is + * willing to preallocate. + * + * For example, the mPIPE driver only supports as many service domains + * as are supported by the mPIPE hardware. This limitation is + * required because the hardware implements its own MMIO protection + * scheme to allow large MMIO mappings while still protecting small + * register ranges within the page that should only be accessed by the + * hypervisor. + * + * In contrast, drivers with no hardware service domain limitations + * (for instance the TRIO shim) can implement an arbitrary number of + * service domains. In these cases, each service domain is limited to + * a carefully restricted set of legal MMIO addresses if necessary to + * keep one application from corrupting another application's state. + * + * @section iorpc_conventions System Call Conventions + * + * The driver's open routine is responsible for allocating a new + * service domain for each hv_dev_open() call. By convention, the + * return value from open() should be the service domain number on + * success, or GXIO_ERR_NO_SVC_DOM if no more service domains are + * available. + * + * The implementations of hv_dev_pread() and hv_dev_pwrite() are + * responsible for validating the devhdl value passed up by the + * client. Since the device handle returned by hv_dev_open() should + * embed the positive service domain number, drivers should make sure + * that DRV_HDL2BITS(devhdl) is a legal service domain. If the client + * passes an illegal service domain number, the routine should return + * GXIO_ERR_INVAL_SVC_DOM. Once the service domain number has been + * validated, the driver can copy to/from the client buffer and call + * the dispatch_read() or dispatch_write() methods created by the RPC + * generator. + * + * The hv_dev_close() implementation should reset all service domain + * state and put the service domain back on a free list for + * reallocation by a future application. In most cases, this will + * require executing a hardware reset or drain flow and denying any + * MMIO regions that were created for the service domain. + * + * @section iorpc_data Special Data Types + * + * The .idl file syntax allows the creation of syscalls with special + * parameters that require permission checks or translations as part + * of the system call path. Because of limitations in the code + * generator, APIs are generally limited to just one of these special + * parameters per system call, and they are sometimes required to be + * the first or last parameter to the call. Special parameters + * include: + * + * @subsection iorpc_mem_buffer MEM_BUFFER + * + * The MEM_BUFFER() datatype allows user space to "register" memory + * buffers with a device. Registering memory accomplishes two tasks: + * Linux keeps track of all buffers that might be modified by a + * hardware device, and the hardware device drivers bind registered + * buffers to particular hardware resources like ingress NotifRings. + * The MEM_BUFFER() idl syntax can take extra flags like ALIGN_64KB, + * ALIGN_SELF_SIZE, and FLAGS indicating that memory buffers must have + * certain alignment or that the user should be able to pass a "memory + * flags" word specifying attributes like nt_hint or IO cache pinning. + * The parser will accept multiple MEM_BUFFER() flags. + * + * Implementations must obey the following conventions when + * registering memory buffers via the iorpc flow. These rules are a + * result of the Linux driver implementation, which needs to keep + * track of how many times a particular page has been registered with + * the hardware so that it can release the page when all those + * registrations are cleared. + * + * - Memory registrations that refer to a resource which has already + * been bound must return GXIO_ERR_ALREADY_INIT. Thus, it is an + * error to register memory twice without resetting (i.e. closing) the + * resource in between. This convention keeps the Linux driver from + * having to track which particular devices a page is bound to. + * + * - At present, a memory registration is only cleared when the + * service domain is reset. In this case, the Linux driver simply + * closes the HV device file handle and then decrements the reference + * counts of all pages that were previously registered with the + * device. + * + * - In the future, we may add a mechanism for unregistering memory. + * One possible implementation would require that the user specify + * which buffer is currently registered. The HV would then verify + * that that page was actually the one currently mapped and return + * success or failure to Linux, which would then only decrement the + * page reference count if the addresses were mapped. Another scheme + * might allow Linux to pass a token to the HV to be returned when the + * resource is unmapped. + * + * @subsection iorpc_interrupt INTERRUPT + * + * The INTERRUPT .idl datatype allows the client to bind hardware + * interrupts to a particular combination of IPI parameters - CPU, IPI + * PL, and event bit number. This data is passed via a special + * datatype so that the Linux driver can validate the CPU and PL and + * the HV generic iorpc code can translate client CPUs to real CPUs. + * + * @subsection iorpc_pollfd_setup POLLFD_SETUP + * + * The POLLFD_SETUP .idl datatype allows the client to set up hardware + * interrupt bindings which are received by Linux but which are made + * visible to user processes as state transitions on a file descriptor; + * this allows user processes to use Linux primitives, such as poll(), to + * await particular hardware events. This data is passed via a special + * datatype so that the Linux driver may recognize the pollable file + * descriptor and translate it to a set of interrupt target information, + * and so that the HV generic iorpc code can translate client CPUs to real + * CPUs. + * + * @subsection iorpc_pollfd POLLFD + * + * The POLLFD .idl datatype allows manipulation of hardware interrupt + * bindings set up via the POLLFD_SETUP datatype; common operations are + * resetting the state of the requested interrupt events, and unbinding any + * bound interrupts. This data is passed via a special datatype so that + * the Linux driver may recognize the pollable file descriptor and + * translate it to an interrupt identifier previously supplied by the + * hypervisor as the result of an earlier pollfd_setup operation. + * + * @subsection iorpc_blob BLOB + * + * The BLOB .idl datatype allows the client to write an arbitrary + * length string of bytes up to the hypervisor driver. This can be + * useful for passing up large, arbitrarily structured data like + * classifier programs. The iorpc stack takes care of validating the + * buffer VA and CPA as the data passes up to the hypervisor. Unlike + * MEM_BUFFER(), the buffer is not registered - Linux does not bump + * page refcounts and the HV driver should not reuse the buffer once + * the system call is complete. + * + * @section iorpc_translation Translating User Space Calls + * + * The ::iorpc_offset structure describes the formatting of the offset + * that is passed to pread() or pwrite() as part of the generated RPC code. + * When the user calls up to Linux, the rpc code fills in all the fields of + * the offset, including a 16-bit opcode, a 16 bit format indicator, and 32 + * bits of user-specified "sub-offset". The opcode indicates which syscall + * is being requested. The format indicates whether there is a "prefix + * struct" at the start of the memory buffer passed to pwrite(), and if so + * what data is in that prefix struct. These prefix structs are used to + * implement special datatypes like MEM_BUFFER() and INTERRUPT - we arrange + * to put data that needs translation and permission checks at the start of + * the buffer so that the Linux driver and generic portions of the HV iorpc + * code can easily access the data. The 32 bits of user-specified + * "sub-offset" are most useful for pread() calls where the user needs to + * also pass in a few bits indicating which register to read, etc. + * + * The Linux iorpc driver watches for system calls that contain prefix + * structs so that it can translate parameters and bump reference + * counts as appropriate. It does not (currently) have any knowledge + * of the per-device opcodes - it doesn't care what operation you're + * doing to mPIPE, so long as it can do all the generic book-keeping. + * The hv/iorpc.h header file defines all of the generic encoding bits + * needed to translate iorpc calls without knowing which particular + * opcode is being issued. + * + * @section iorpc_globals Global iorpc Calls + * + * Implementing mmap() required adding some special iorpc syscalls + * that are only called by the Linux driver, never by userspace. + * These include get_mmio_base() and check_mmio_offset(). These + * routines are described in globals.idl and must be included in every + * iorpc driver. By providing these routines in every driver, Linux's + * mmap implementation can easily get the PTE bits it needs and + * validate the PA offset without needing to know the per-device + * opcodes to perform those tasks. + * + * @section iorpc_kernel Supporting gxio APIs in the Kernel + * + * The iorpc code generator also supports generation of kernel code + * implementing the gxio APIs. This capability is currently used by + * the mPIPE network driver, and will likely be used by the TRIO root + * complex and endpoint drivers and perhaps an in-kernel crypto + * driver. Each driver that wants to instantiate iorpc calls in the + * kernel needs to generate a kernel version of the generate rpc code + * and (probably) copy any related gxio source files into the kernel. + * The mPIPE driver provides a good example of this pattern. + */ + +#ifdef __KERNEL__ +#include <linux/stddef.h> +#else +#include <stddef.h> +#endif + +#if defined(__HV__) +#include <hv/hypervisor.h> +#elif defined(__KERNEL__) +#include "hypervisor.h" +#include <linux/types.h> +#else +#include <stdint.h> +#endif + + +/** Code indicating translation services required within the RPC path. + * These indicate whether there is a translatable struct at the start + * of the RPC buffer and what information that struct contains. + */ +enum iorpc_format_e +{ + /** No translation required, no prefix struct. */ + IORPC_FORMAT_NONE, + + /** No translation required, no prefix struct, no access to this + * operation from user space. */ + IORPC_FORMAT_NONE_NOUSER, + + /** Prefix struct contains user VA and size. */ + IORPC_FORMAT_USER_MEM, + + /** Prefix struct contains CPA, size, and homing bits. */ + IORPC_FORMAT_KERNEL_MEM, + + /** Prefix struct contains interrupt. */ + IORPC_FORMAT_KERNEL_INTERRUPT, + + /** Prefix struct contains user-level interrupt. */ + IORPC_FORMAT_USER_INTERRUPT, + + /** Prefix struct contains pollfd_setup (interrupt information). */ + IORPC_FORMAT_KERNEL_POLLFD_SETUP, + + /** Prefix struct contains user-level pollfd_setup (file descriptor). */ + IORPC_FORMAT_USER_POLLFD_SETUP, + + /** Prefix struct contains pollfd (interrupt cookie). */ + IORPC_FORMAT_KERNEL_POLLFD, + + /** Prefix struct contains user-level pollfd (file descriptor). */ + IORPC_FORMAT_USER_POLLFD, +}; + + +/** Generate an opcode given format and code. */ +#define IORPC_OPCODE(FORMAT, CODE) (((FORMAT) << 16) | (CODE)) + +/** The offset passed through the read() and write() system calls + combines an opcode with 32 bits of user-specified offset. */ +union iorpc_offset +{ +#ifndef __BIG_ENDIAN__ + uint64_t offset; /**< All bits. */ + + struct + { + uint16_t code; /**< RPC code. */ + uint16_t format; /**< iorpc_format_e */ + uint32_t sub_offset; /**< caller-specified offset. */ + }; + + uint32_t opcode; /**< Opcode combines code & format. */ +#else + uint64_t offset; /**< All bits. */ + + struct + { + uint32_t sub_offset; /**< caller-specified offset. */ + uint16_t format; /**< iorpc_format_e */ + uint16_t code; /**< RPC code. */ + }; + + struct + { + uint32_t padding; + uint32_t opcode; /**< Opcode combines code & format. */ + }; +#endif +}; + + +/** Homing and cache hinting bits that can be used by IO devices. */ +struct iorpc_mem_attr +{ + unsigned int lotar_x:4; /**< lotar X bits (or Gx page_mask). */ + unsigned int lotar_y:4; /**< lotar Y bits (or Gx page_offset). */ + unsigned int hfh:1; /**< Uses hash-for-home. */ + unsigned int nt_hint:1; /**< Non-temporal hint. */ + unsigned int io_pin:1; /**< Only fill 'IO' cache ways. */ +}; + +/** Set the nt_hint bit. */ +#define IORPC_MEM_BUFFER_FLAG_NT_HINT (1 << 0) + +/** Set the IO pin bit. */ +#define IORPC_MEM_BUFFER_FLAG_IO_PIN (1 << 1) + + +/** A structure used to describe memory registration. Different + protection levels describe memory differently, so this union + contains all the different possible descriptions. As a request + moves up the call chain, each layer translates from one + description format to the next. In particular, the Linux iorpc + driver translates user VAs into CPAs and homing parameters. */ +union iorpc_mem_buffer +{ + struct + { + uint64_t va; /**< User virtual address. */ + uint64_t size; /**< Buffer size. */ + unsigned int flags; /**< nt_hint, IO pin. */ + } + user; /**< Buffer as described by user apps. */ + + struct + { + unsigned long long cpa; /**< Client physical address. */ +#if defined(__KERNEL__) || defined(__HV__) + size_t size; /**< Buffer size. */ + HV_PTE pte; /**< PTE describing memory homing. */ +#else + uint64_t size; + uint64_t pte; +#endif + unsigned int flags; /**< nt_hint, IO pin. */ + } + kernel; /**< Buffer as described by kernel. */ + + struct + { + unsigned long long pa; /**< Physical address. */ + size_t size; /**< Buffer size. */ + struct iorpc_mem_attr attr; /**< Homing and locality hint bits. */ + } + hv; /**< Buffer parameters for HV driver. */ +}; + + +/** A structure used to describe interrupts. The format differs slightly + * for user and kernel interrupts. As with the mem_buffer_t, translation + * between the formats is done at each level. */ +union iorpc_interrupt +{ + struct + { + int cpu; /**< CPU. */ + int event; /**< evt_num */ + } + user; /**< Interrupt as described by user applications. */ + + struct + { + int x; /**< X coord. */ + int y; /**< Y coord. */ + int ipi; /**< int_num */ + int event; /**< evt_num */ + } + kernel; /**< Interrupt as described by the kernel. */ + +}; + + +/** A structure used to describe interrupts used with poll(). The format + * differs significantly for requests from user to kernel, and kernel to + * hypervisor. As with the mem_buffer_t, translation between the formats + * is done at each level. */ +union iorpc_pollfd_setup +{ + struct + { + int fd; /**< Pollable file descriptor. */ + } + user; /**< pollfd_setup as described by user applications. */ + + struct + { + int x; /**< X coord. */ + int y; /**< Y coord. */ + int ipi; /**< int_num */ + int event; /**< evt_num */ + } + kernel; /**< pollfd_setup as described by the kernel. */ + +}; + + +/** A structure used to describe previously set up interrupts used with + * poll(). The format differs significantly for requests from user to + * kernel, and kernel to hypervisor. As with the mem_buffer_t, translation + * between the formats is done at each level. */ +union iorpc_pollfd +{ + struct + { + int fd; /**< Pollable file descriptor. */ + } + user; /**< pollfd as described by user applications. */ + + struct + { + int cookie; /**< hv cookie returned by the pollfd_setup operation. */ + } + kernel; /**< pollfd as described by the kernel. */ + +}; + + +/** The various iorpc devices use error codes from -1100 to -1299. + * + * This range is distinct from netio (-700 to -799), the hypervisor + * (-800 to -899), tilepci (-900 to -999), ilib (-1000 to -1099), + * gxcr (-1300 to -1399) and gxpci (-1400 to -1499). + */ +enum gxio_err_e { + + /** Largest iorpc error number. */ + GXIO_ERR_MAX = -1101, + + + /********************************************************/ + /* Generic Error Codes */ + /********************************************************/ + + /** Bad RPC opcode - possible version incompatibility. */ + GXIO_ERR_OPCODE = -1101, + + /** Invalid parameter. */ + GXIO_ERR_INVAL = -1102, + + /** Memory buffer did not meet alignment requirements. */ + GXIO_ERR_ALIGNMENT = -1103, + + /** Memory buffers must be coherent and cacheable. */ + GXIO_ERR_COHERENCE = -1104, + + /** Resource already initialized. */ + GXIO_ERR_ALREADY_INIT = -1105, + + /** No service domains available. */ + GXIO_ERR_NO_SVC_DOM = -1106, + + /** Illegal service domain number. */ + GXIO_ERR_INVAL_SVC_DOM = -1107, + + /** Illegal MMIO address. */ + GXIO_ERR_MMIO_ADDRESS = -1108, + + /** Illegal interrupt binding. */ + GXIO_ERR_INTERRUPT = -1109, + + /** Unreasonable client memory. */ + GXIO_ERR_CLIENT_MEMORY = -1110, + + /** No more IOTLB entries. */ + GXIO_ERR_IOTLB_ENTRY = -1111, + + /** Invalid memory size. */ + GXIO_ERR_INVAL_MEMORY_SIZE = -1112, + + /** Unsupported operation. */ + GXIO_ERR_UNSUPPORTED_OP = -1113, + + /** Insufficient DMA credits. */ + GXIO_ERR_DMA_CREDITS = -1114, + + /** Operation timed out. */ + GXIO_ERR_TIMEOUT = -1115, + + /** No such device or object. */ + GXIO_ERR_NO_DEVICE = -1116, + + /** Device or resource busy. */ + GXIO_ERR_BUSY = -1117, + + /** I/O error. */ + GXIO_ERR_IO = -1118, + + /** Permissions error. */ + GXIO_ERR_PERM = -1119, + + + + /********************************************************/ + /* Test Device Error Codes */ + /********************************************************/ + + /** Illegal register number. */ + GXIO_TEST_ERR_REG_NUMBER = -1120, + + /** Illegal buffer slot. */ + GXIO_TEST_ERR_BUFFER_SLOT = -1121, + + + /********************************************************/ + /* MPIPE Error Codes */ + /********************************************************/ + + + /** Invalid buffer size. */ + GXIO_MPIPE_ERR_INVAL_BUFFER_SIZE = -1131, + + /** Cannot allocate buffer stack. */ + GXIO_MPIPE_ERR_NO_BUFFER_STACK = -1140, + + /** Invalid buffer stack number. */ + GXIO_MPIPE_ERR_BAD_BUFFER_STACK = -1141, + + /** Cannot allocate NotifRing. */ + GXIO_MPIPE_ERR_NO_NOTIF_RING = -1142, + + /** Invalid NotifRing number. */ + GXIO_MPIPE_ERR_BAD_NOTIF_RING = -1143, + + /** Cannot allocate NotifGroup. */ + GXIO_MPIPE_ERR_NO_NOTIF_GROUP = -1144, + + /** Invalid NotifGroup number. */ + GXIO_MPIPE_ERR_BAD_NOTIF_GROUP = -1145, + + /** Cannot allocate bucket. */ + GXIO_MPIPE_ERR_NO_BUCKET = -1146, + + /** Invalid bucket number. */ + GXIO_MPIPE_ERR_BAD_BUCKET = -1147, + + /** Cannot allocate eDMA ring. */ + GXIO_MPIPE_ERR_NO_EDMA_RING = -1148, + + /** Invalid eDMA ring number. */ + GXIO_MPIPE_ERR_BAD_EDMA_RING = -1149, + + /** Invalid channel number. */ + GXIO_MPIPE_ERR_BAD_CHANNEL = -1150, + + /** Bad configuration. */ + GXIO_MPIPE_ERR_BAD_CONFIG = -1151, + + /** Empty iqueue. */ + GXIO_MPIPE_ERR_IQUEUE_EMPTY = -1152, + + /** Empty rules. */ + GXIO_MPIPE_ERR_RULES_EMPTY = -1160, + + /** Full rules. */ + GXIO_MPIPE_ERR_RULES_FULL = -1161, + + /** Corrupt rules. */ + GXIO_MPIPE_ERR_RULES_CORRUPT = -1162, + + /** Invalid rules. */ + GXIO_MPIPE_ERR_RULES_INVALID = -1163, + + /** Classifier is too big. */ + GXIO_MPIPE_ERR_CLASSIFIER_TOO_BIG = -1170, + + /** Classifier is too complex. */ + GXIO_MPIPE_ERR_CLASSIFIER_TOO_COMPLEX = -1171, + + /** Classifier has bad header. */ + GXIO_MPIPE_ERR_CLASSIFIER_BAD_HEADER = -1172, + + /** Classifier has bad contents. */ + GXIO_MPIPE_ERR_CLASSIFIER_BAD_CONTENTS = -1173, + + /** Classifier encountered invalid symbol. */ + GXIO_MPIPE_ERR_CLASSIFIER_INVAL_SYMBOL = -1174, + + /** Classifier encountered invalid bounds. */ + GXIO_MPIPE_ERR_CLASSIFIER_INVAL_BOUNDS = -1175, + + /** Classifier encountered invalid relocation. */ + GXIO_MPIPE_ERR_CLASSIFIER_INVAL_RELOCATION = -1176, + + /** Classifier encountered undefined symbol. */ + GXIO_MPIPE_ERR_CLASSIFIER_UNDEF_SYMBOL = -1177, + + + /********************************************************/ + /* TRIO Error Codes */ + /********************************************************/ + + /** Cannot allocate memory map region. */ + GXIO_TRIO_ERR_NO_MEMORY_MAP = -1180, + + /** Invalid memory map region number. */ + GXIO_TRIO_ERR_BAD_MEMORY_MAP = -1181, + + /** Cannot allocate scatter queue. */ + GXIO_TRIO_ERR_NO_SCATTER_QUEUE = -1182, + + /** Invalid scatter queue number. */ + GXIO_TRIO_ERR_BAD_SCATTER_QUEUE = -1183, + + /** Cannot allocate push DMA ring. */ + GXIO_TRIO_ERR_NO_PUSH_DMA_RING = -1184, + + /** Invalid push DMA ring index. */ + GXIO_TRIO_ERR_BAD_PUSH_DMA_RING = -1185, + + /** Cannot allocate pull DMA ring. */ + GXIO_TRIO_ERR_NO_PULL_DMA_RING = -1186, + + /** Invalid pull DMA ring index. */ + GXIO_TRIO_ERR_BAD_PULL_DMA_RING = -1187, + + /** Cannot allocate PIO region. */ + GXIO_TRIO_ERR_NO_PIO = -1188, + + /** Invalid PIO region index. */ + GXIO_TRIO_ERR_BAD_PIO = -1189, + + /** Cannot allocate ASID. */ + GXIO_TRIO_ERR_NO_ASID = -1190, + + /** Invalid ASID. */ + GXIO_TRIO_ERR_BAD_ASID = -1191, + + + /********************************************************/ + /* MICA Error Codes */ + /********************************************************/ + + /** No such accelerator type. */ + GXIO_MICA_ERR_BAD_ACCEL_TYPE = -1220, + + /** Cannot allocate context. */ + GXIO_MICA_ERR_NO_CONTEXT = -1221, + + /** PKA command queue is full, can't add another command. */ + GXIO_MICA_ERR_PKA_CMD_QUEUE_FULL = -1222, + + /** PKA result queue is empty, can't get a result from the queue. */ + GXIO_MICA_ERR_PKA_RESULT_QUEUE_EMPTY = -1223, + + /********************************************************/ + /* GPIO Error Codes */ + /********************************************************/ + + /** Pin not available. Either the physical pin does not exist, or + * it is reserved by the hypervisor for system usage. */ + GXIO_GPIO_ERR_PIN_UNAVAILABLE = -1240, + + /** Pin busy. The pin exists, and is available for use via GXIO, but + * it has been attached by some other process or driver. */ + GXIO_GPIO_ERR_PIN_BUSY = -1241, + + /** Cannot access unattached pin. One or more of the pins being + * manipulated by this call are not attached to the requesting + * context. */ + GXIO_GPIO_ERR_PIN_UNATTACHED = -1242, + + /** Invalid I/O mode for pin. The wiring of the pin in the system + * is such that the I/O mode or electrical control parameters + * requested could cause damage. */ + GXIO_GPIO_ERR_PIN_INVALID_MODE = -1243, + + /** Smallest iorpc error number. */ + GXIO_ERR_MIN = -1299 +}; + + +#endif /* !_HV_IORPC_H_ */ |