diff options
| -rw-r--r-- | Documentation/i2c/busses/i2c-piix4 | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 8 | ||||
| -rw-r--r-- | drivers/net/sfc/sfe4001.c | 4 | ||||
| -rw-r--r-- | include/linux/i2c.h | 18 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 2 |
6 files changed, 27 insertions, 9 deletions
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index c5b37c570554..ac540c71c7eb 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -8,7 +8,7 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available - * AMD SB900 + * AMD Hudson-2 Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 737335ff2b21..e8fe7f169e25 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -128,7 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 - AMD SB900 + AMD Hudson-2 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d26a972aacaa..1e245e9cad31 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 - AMD SB900 + AMD Hudson-2 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; - /* SB800 SMBus does not support forcing address */ + /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { - dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + dev_err(&PIIX4_dev->dev, "SMBus does not support " "forcing address!\n"); return -EINVAL; } @@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad49b57..49eb91b5f50c 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 57d41b0abce2..7b40cda57a70 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) dev_set_drvdata(&dev->dev, data); } +/** + * i2c_lock_adapter - Prevent access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_lock_adapter(struct i2c_adapter *adapter) +{ + mutex_lock(&adapter->bus_lock); +} + +/** + * i2c_unlock_adapter - Reauthorize access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_unlock_adapter(struct i2c_adapter *adapter) +{ + mutex_unlock(&adapter->bus_lock); +} + /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0f0f3851cd4..9ceb392cb984 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,7 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 |