summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/feature-removal-schedule.txt8
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/char/watchdog/Kconfig150
-rw-r--r--drivers/char/watchdog/Makefile2
-rw-r--r--drivers/char/watchdog/cpu5wdt.c14
-rw-r--r--drivers/char/watchdog/eurotechwdt.c22
-rw-r--r--drivers/char/watchdog/i8xx_tco.c571
-rw-r--r--drivers/char/watchdog/i8xx_tco.h42
-rw-r--r--drivers/char/watchdog/ibmasr.c11
-rw-r--r--drivers/char/watchdog/machzwd.c18
-rw-r--r--drivers/char/watchdog/mtx-1_wdt.c238
-rw-r--r--drivers/char/watchdog/pcwd.c242
-rw-r--r--drivers/char/watchdog/pcwd_usb.c8
-rw-r--r--drivers/char/watchdog/s3c2410_wdt.c6
-rw-r--r--drivers/char/watchdog/sbc8360.c28
-rw-r--r--drivers/char/watchdog/w83627hf_wdt.c23
16 files changed, 496 insertions, 893 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 676b7981adb7..c6322c760348 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -278,14 +278,6 @@ Who: Richard Purdie <rpurdie@rpsys.net>
---------------------------
-What: i8xx_tco watchdog driver
-When: in 2.6.22
-Why: the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
- watchdog driver.
-Who: Wim Van Sebroeck <wim@iguana.be>
-
----------------------------
-
What: Multipath cached routing support in ipv4
When: in 2.6.23
Why: Code was merged, then submitter immediately disappeared leaving
diff --git a/MAINTAINERS b/MAINTAINERS
index cfd26ddccd7a..bd558ac5bb73 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1718,12 +1718,6 @@ P: H. Peter Anvin
M: hpa@zytor.com
S: Maintained
-i810 TCO TIMER WATCHDOG
-P: Nils Faerber
-M: nils@kernelconcepts.de
-W: http://www.kernelconcepts.de/
-S: Maintained
-
IA64 (Itanium) PLATFORM
P: Tony Luck
M: tony.luck@intel.com
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index 60198a78974c..1cad32c62ed3 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -2,9 +2,7 @@
# Watchdog device configuration
#
-menu "Watchdog Cards"
-
-config WATCHDOG
+menuconfig WATCHDOG
bool "Watchdog Timer Support"
---help---
If you say Y here (and to one of the following options) and create a
@@ -28,9 +26,10 @@ config WATCHDOG
If unsure, say N.
+if WATCHDOG
+
config WATCHDOG_NOWAYOUT
bool "Disable watchdog shutdown on close"
- depends on WATCHDOG
help
The default watchdog behaviour (which you get if you say N here) is
to stop the timer if the process managing it closes the file
@@ -43,13 +42,11 @@ config WATCHDOG_NOWAYOUT
#
comment "Watchdog Device Drivers"
- depends on WATCHDOG
# Architecture Independent
config SOFT_WATCHDOG
tristate "Software watchdog"
- depends on WATCHDOG
help
A software monitoring watchdog. This will fail to reboot your system
from some situations that the hardware watchdog will recover
@@ -62,14 +59,14 @@ config SOFT_WATCHDOG
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
- depends on WATCHDOG && ARCH_AT91RM9200
+ depends on ARCH_AT91RM9200
help
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
config 21285_WATCHDOG
tristate "DC21285 watchdog"
- depends on WATCHDOG && FOOTBRIDGE
+ depends on FOOTBRIDGE
help
The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
here if you wish to use this. Alternatively say M to compile the
@@ -83,7 +80,7 @@ config 21285_WATCHDOG
config 977_WATCHDOG
tristate "NetWinder WB83C977 watchdog"
- depends on WATCHDOG && FOOTBRIDGE && ARCH_NETWINDER
+ depends on FOOTBRIDGE && ARCH_NETWINDER
help
Say Y here to include support for the WB977 watchdog included in
NetWinder machines. Alternatively say M to compile the driver as
@@ -93,7 +90,7 @@ config 977_WATCHDOG
config IXP2000_WATCHDOG
tristate "IXP2000 Watchdog"
- depends on WATCHDOG && ARCH_IXP2000
+ depends on ARCH_IXP2000
help
Say Y here if to include support for the watchdog timer
in the Intel IXP2000(2400, 2800, 2850) network processors.
@@ -104,7 +101,7 @@ config IXP2000_WATCHDOG
config IXP4XX_WATCHDOG
tristate "IXP4xx Watchdog"
- depends on WATCHDOG && ARCH_IXP4XX
+ depends on ARCH_IXP4XX
help
Say Y here if to include support for the watchdog timer
in the Intel IXP4xx network processors. This driver can
@@ -120,7 +117,7 @@ config IXP4XX_WATCHDOG
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
- depends on WATCHDOG && ARCH_S3C2410
+ depends on ARCH_S3C2410
help
Watchdog timer block in the Samsung S3C2410 chips. This will
reboot the system when the timer expires with the watchdog
@@ -136,7 +133,7 @@ config S3C2410_WATCHDOG
config SA1100_WATCHDOG
tristate "SA1100/PXA2xx watchdog"
- depends on WATCHDOG && ( ARCH_SA1100 || ARCH_PXA )
+ depends on ARCH_SA1100 || ARCH_PXA
help
Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
reboot your system when timeout is reached.
@@ -148,7 +145,7 @@ config SA1100_WATCHDOG
config MPCORE_WATCHDOG
tristate "MPcore watchdog"
- depends on WATCHDOG && ARM_MPCORE_PLATFORM && LOCAL_TIMERS
+ depends on ARM_MPCORE_PLATFORM && LOCAL_TIMERS
help
Watchdog timer embedded into the MPcore system.
@@ -157,7 +154,7 @@ config MPCORE_WATCHDOG
config EP93XX_WATCHDOG
tristate "EP93xx Watchdog"
- depends on WATCHDOG && ARCH_EP93XX
+ depends on ARCH_EP93XX
help
Say Y here if to include support for the watchdog timer
embedded in the Cirrus Logic EP93xx family of devices.
@@ -167,14 +164,14 @@ config EP93XX_WATCHDOG
config OMAP_WATCHDOG
tristate "OMAP Watchdog"
- depends on WATCHDOG && (ARCH_OMAP16XX || ARCH_OMAP24XX)
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX
help
Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to
enable the OMAP1610/OMAP1710 watchdog timer.
config PNX4008_WATCHDOG
tristate "PNX4008 Watchdog"
- depends on WATCHDOG && ARCH_PNX4008
+ depends on ARCH_PNX4008
help
Say Y here if to include support for the watchdog timer
in the PNX4008 processor.
@@ -187,7 +184,7 @@ config PNX4008_WATCHDOG
config ACQUIRE_WDT
tristate "Acquire SBC Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on Single Board
Computers produced by Acquire Inc (and others). This watchdog
@@ -201,7 +198,7 @@ config ACQUIRE_WDT
config ADVANTECH_WDT
tristate "Advantech SBC Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
help
If you are configuring a Linux kernel for the Advantech single-board
computer, say `Y' here to support its built-in watchdog timer
@@ -210,7 +207,7 @@ config ADVANTECH_WDT
config ALIM1535_WDT
tristate "ALi M1535 PMU Watchdog Timer"
- depends on WATCHDOG && X86 && PCI
+ depends on X86 && PCI
---help---
This is the driver for the hardware watchdog on the ALi M1535 PMU.
@@ -221,7 +218,7 @@ config ALIM1535_WDT
config ALIM7101_WDT
tristate "ALi M7101 PMU Computer Watchdog"
- depends on WATCHDOG && X86 && PCI
+ depends on X86 && PCI
help
This is the driver for the hardware watchdog on the ALi M7101 PMU
as used in the x86 Cobalt servers.
@@ -233,7 +230,7 @@ config ALIM7101_WDT
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
help
This is the driver for the hardware watchdog built in to the
AMD "Elan" SC520 microcomputer commonly used in embedded systems.
@@ -246,7 +243,7 @@ config SC520_WDT
config EUROTECH_WDT
tristate "Eurotech CPU-1220/1410 Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
help
Enable support for the watchdog timer on the Eurotech CPU-1220 and
CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product
@@ -254,7 +251,7 @@ config EUROTECH_WDT
config IB700_WDT
tristate "IB700 SBC Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the IB700 Single
Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
@@ -270,7 +267,7 @@ config IB700_WDT
config IBMASR
tristate "IBM Automatic Server Restart"
- depends on WATCHDOG && X86
+ depends on X86
help
This is the driver for the IBM Automatic Server Restart watchdog
timer built-in into some eServer xSeries machines.
@@ -280,7 +277,7 @@ config IBMASR
config WAFER_WDT
tristate "ICP Wafer 5823 Single Board Computer Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
help
This is a driver for the hardware watchdog on the ICP Wafer 5823
Single Board Computer (and probably other similar models).
@@ -290,7 +287,7 @@ config WAFER_WDT
config I6300ESB_WDT
tristate "Intel 6300ESB Timer/Watchdog"
- depends on WATCHDOG && X86 && PCI
+ depends on X86 && PCI
---help---
Hardware driver for the watchdog timer built into the Intel
6300ESB controller hub.
@@ -298,31 +295,9 @@ config I6300ESB_WDT
To compile this driver as a module, choose M here: the
module will be called i6300esb.
-config I8XX_TCO
- tristate "Intel i8xx TCO Timer/Watchdog"
- depends on WATCHDOG && (X86 || IA64) && PCI
- default n
- ---help---
- Hardware driver for the TCO timer built into the Intel 82801
- I/O Controller Hub family. The TCO (Total Cost of Ownership)
- timer is a watchdog timer that will reboot the machine after
- its second expiration. The expiration time can be configured
- with the "heartbeat" parameter.
-
- On some motherboards the driver may fail to reset the chipset's
- NO_REBOOT flag which prevents the watchdog from rebooting the
- machine. If this is the case you will get a kernel message like
- "failed to reset NO_REBOOT flag, reboot disabled by hardware".
-
- To compile this driver as a module, choose M here: the
- module will be called i8xx_tco.
-
- Note: This driver will be removed in the near future. Please
- use the Intel TCO Timer/Watchdog driver.
-
config ITCO_WDT
tristate "Intel TCO Timer/Watchdog"
- depends on WATCHDOG && (X86 || IA64) && PCI
+ depends on (X86 || IA64) && PCI
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
@@ -351,7 +326,7 @@ config ITCO_VENDOR_SUPPORT
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
help
This is a driver for National Semiconductor PC87307/PC97307 hardware
watchdog cards as found on the SC1200. This watchdog is mainly used
@@ -365,7 +340,7 @@ config SC1200_WDT
config SCx200_WDT
tristate "National Semiconductor SCx200 Watchdog"
- depends on WATCHDOG && SCx200 && PCI
+ depends on SCx200 && PCI
help
Enable the built-in watchdog timer support on the National
Semiconductor SCx200 processors.
@@ -374,7 +349,7 @@ config SCx200_WDT
config PC87413_WDT
tristate "NS PC87413 watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the PC87413 chipset
This watchdog simply watches your kernel to make sure it doesn't
@@ -388,7 +363,7 @@ config PC87413_WDT
config 60XX_WDT
tristate "SBC-60XX Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
help
This driver can be used with the watchdog timer found on some
single board computers, namely the 6010 PII based computer.
@@ -402,7 +377,7 @@ config 60XX_WDT
config SBC8360_WDT
tristate "SBC8360 Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the SBC8360 Single
@@ -415,7 +390,7 @@ config SBC8360_WDT
config CPU5_WDT
tristate "SMA CPU5 Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
TBD.
To compile this driver as a module, choose M here: the
@@ -423,7 +398,7 @@ config CPU5_WDT
config SMSC37B787_WDT
tristate "Winbond SMsC37B787 Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog component on the
Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
@@ -443,7 +418,7 @@ config SMSC37B787_WDT
config W83627HF_WDT
tristate "W83627HF Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83627HF chipset
as used in Advantech PC-9578 and Tyan S2721-533 motherboards
@@ -458,7 +433,7 @@ config W83627HF_WDT
config W83697HF_WDT
tristate "W83697HF/W83697HG Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83697HF/HG
chipset as used in Dedibox/VIA motherboards (and likely others).
@@ -473,7 +448,7 @@ config W83697HF_WDT
config W83877F_WDT
tristate "W83877F (EMACS) Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83877F chipset
as used in EMACS PC-104 motherboards (and likely others). This
@@ -488,7 +463,7 @@ config W83877F_WDT
config W83977F_WDT
tristate "W83977F (PCM-5335) Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83977F I/O chip
as used in AAEON's PCM-5335 SBC (and likely others). This
@@ -501,7 +476,7 @@ config W83977F_WDT
config MACHZ_WDT
tristate "ZF MachZ Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
If you are using a ZF Micro MachZ processor, say Y here, otherwise
N. This is the driver for the watchdog timer built-in on that
@@ -514,7 +489,7 @@ config MACHZ_WDT
config SBC_EPX_C3_WATCHDOG
tristate "Winsystems SBC EPX-C3 watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the built-in watchdog timer on the EPX-C3
Single-board computer made by Winsystems, Inc.
@@ -537,19 +512,19 @@ config SBC_EPX_C3_WATCHDOG
config 8xx_WDT
tristate "MPC8xx Watchdog Timer"
- depends on WATCHDOG && 8xx
+ depends on 8xx
config 83xx_WDT
tristate "MPC83xx Watchdog Timer"
- depends on WATCHDOG && PPC_83xx
+ depends on PPC_83xx
config MV64X60_WDT
tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
- depends on WATCHDOG && MV64X60
+ depends on MV64X60
config BOOKE_WDT
bool "PowerPC Book-E Watchdog Timer"
- depends on WATCHDOG && (BOOKE || 4xx)
+ depends on BOOKE || 4xx
---help---
Please see Documentation/watchdog/watchdog-api.txt for
more information.
@@ -558,7 +533,7 @@ config BOOKE_WDT
config WATCHDOG_RTAS
tristate "RTAS watchdog"
- depends on WATCHDOG && PPC_RTAS
+ depends on PPC_RTAS
help
This driver adds watchdog support for the RTAS watchdog.
@@ -569,16 +544,23 @@ config WATCHDOG_RTAS
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
- depends on WATCHDOG && SGI_IP22
+ depends on SGI_IP22
help
Hardware driver for the Indy's/I2's watchdog. This is a
watchdog timer that will reboot the machine after a 60 second
timer expired and no process has written to /dev/watchdog during
that time.
+config WDT_MTX1
+ tristate "MTX-1 Hardware Watchdog"
+ depends on MIPS_MTX1
+ help
+ Hardware driver for the MTX-1 boards. This is a watchdog timer that
+ will reboot the machine after a 100 seconds timer expired.
+
config WDT_RM9K_GPI
tristate "RM9000/GPI hardware watchdog"
- depends on WATCHDOG && CPU_RM9000
+ depends on CPU_RM9000
help
Watchdog implementation using the GPI hardware found on
PMC-Sierra RM9xxx CPUs.
@@ -590,7 +572,7 @@ config WDT_RM9K_GPI
config ZVM_WATCHDOG
tristate "z/VM Watchdog Timer"
- depends on WATCHDOG && S390
+ depends on S390
help
IBM s/390 and zSeries machines running under z/VM 5.1 or later
provide a virtual watchdog timer to their guest that cause a
@@ -604,7 +586,7 @@ config ZVM_WATCHDOG
config SH_WDT
tristate "SuperH Watchdog"
- depends on WATCHDOG && SUPERH
+ depends on SUPERH
help
This driver adds watchdog support for the integrated watchdog in the
SuperH processors. If you have one of these processors and wish
@@ -631,7 +613,7 @@ config SH_WDT_MMAP
config WATCHDOG_CP1XXX
tristate "CP1XXX Hardware Watchdog support"
- depends on WATCHDOG && SPARC64 && PCI
+ depends on SPARC64 && PCI
---help---
This is the driver for the hardware watchdog timers present on
Sun Microsystems CompactPCI models CP1400 and CP1500.
@@ -645,7 +627,7 @@ config WATCHDOG_CP1XXX
config WATCHDOG_RIO
tristate "RIO Hardware Watchdog support"
- depends on WATCHDOG && SPARC64 && PCI
+ depends on SPARC64 && PCI
help
Say Y here to support the hardware watchdog capability on Sun RIO
machines. The watchdog timeout period is normally one minute but
@@ -656,11 +638,11 @@ config WATCHDOG_RIO
#
comment "ISA-based Watchdog Cards"
- depends on WATCHDOG && ISA
+ depends on ISA
config PCWATCHDOG
tristate "Berkshire Products ISA-PC Watchdog"
- depends on WATCHDOG && ISA
+ depends on ISA
---help---
This is the driver for the Berkshire Products ISA-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -676,7 +658,7 @@ config PCWATCHDOG
config MIXCOMWD
tristate "Mixcom Watchdog"
- depends on WATCHDOG && ISA
+ depends on ISA
---help---
This is a driver for the Mixcom hardware watchdog cards. This
watchdog simply watches your kernel to make sure it doesn't freeze,
@@ -690,7 +672,7 @@ config MIXCOMWD
config WDT
tristate "WDT Watchdog timer"
- depends on WATCHDOG && ISA
+ depends on ISA
---help---
If you have a WDT500P or WDT501P watchdog board, say Y here,
otherwise N. It is not possible to probe for this board, which means
@@ -720,11 +702,11 @@ config WDT_501
#
comment "PCI-based Watchdog Cards"
- depends on WATCHDOG && PCI
+ depends on PCI
config PCIPCWATCHDOG
tristate "Berkshire Products PCI-PC Watchdog"
- depends on WATCHDOG && PCI
+ depends on PCI
---help---
This is the driver for the Berkshire Products PCI-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -739,7 +721,7 @@ config PCIPCWATCHDOG
config WDTPCI
tristate "PCI-WDT500/501 Watchdog timer"
- depends on WATCHDOG && PCI
+ depends on PCI
---help---
If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
@@ -766,11 +748,11 @@ config WDT_501_PCI
#
comment "USB-based Watchdog Cards"
- depends on WATCHDOG && USB
+ depends on USB
config USBPCWATCHDOG
tristate "Berkshire Products USB-PC Watchdog"
- depends on WATCHDOG && USB
+ depends on USB
---help---
This is the driver for the Berkshire Products USB-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -783,4 +765,4 @@ config USBPCWATCHDOG
Most people will say N.
-endmenu
+endif # WATCHDOG
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index 2cd8ff8d10ac..8bfc00cc7c2b 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -46,7 +46,6 @@ obj-$(CONFIG_IB700_WDT) += ib700wdt.o
obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
@@ -73,6 +72,7 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
# MIPS Architecture
obj-$(CONFIG_INDYDOG) += indydog.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
# S390 Architecture
diff --git a/drivers/char/watchdog/cpu5wdt.c b/drivers/char/watchdog/cpu5wdt.c
index bcd7e36ca0aa..d0d45a8b09f0 100644
--- a/drivers/char/watchdog/cpu5wdt.c
+++ b/drivers/char/watchdog/cpu5wdt.c
@@ -220,17 +220,17 @@ static int __devinit cpu5wdt_init(void)
if ( verbose )
printk(KERN_DEBUG PFX "port=0x%x, verbose=%i\n", port, verbose);
- if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) {
- printk(KERN_ERR PFX "misc_register failed\n");
- goto no_misc;
- }
-
if ( !request_region(port, CPU5WDT_EXTENT, PFX) ) {
printk(KERN_ERR PFX "request_region failed\n");
err = -EBUSY;
goto no_port;
}
+ if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) {
+ printk(KERN_ERR PFX "misc_register failed\n");
+ goto no_misc;
+ }
+
/* watchdog reboot? */
val = inb(port + CPU5WDT_STATUS_REG);
val = (val >> 2) & 1;
@@ -250,9 +250,9 @@ static int __devinit cpu5wdt_init(void)
return 0;
-no_port:
- misc_deregister(&cpu5wdt_misc);
no_misc:
+ release_region(port, CPU5WDT_EXTENT);
+no_port:
return err;
}
diff --git a/drivers/char/watchdog/eurotechwdt.c b/drivers/char/watchdog/eurotechwdt.c
index f70387f01b2b..b070324e27a6 100644
--- a/drivers/char/watchdog/eurotechwdt.c
+++ b/drivers/char/watchdog/eurotechwdt.c
@@ -413,17 +413,10 @@ static int __init eurwdt_init(void)
{
int ret;
- ret = misc_register(&eurwdt_miscdev);
- if (ret) {
- printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
- WATCHDOG_MINOR);
- goto out;
- }
-
ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
if(ret) {
printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
- goto outmisc;
+ goto out;
}
if (!request_region(io, 2, "eurwdt")) {
@@ -438,6 +431,13 @@ static int __init eurwdt_init(void)
goto outreg;
}
+ ret = misc_register(&eurwdt_miscdev);
+ if (ret) {
+ printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
+ WATCHDOG_MINOR);
+ goto outreboot;
+ }
+
eurwdt_unlock_chip();
ret = 0;
@@ -448,14 +448,14 @@ static int __init eurwdt_init(void)
out:
return ret;
+outreboot:
+ unregister_reboot_notifier(&eurwdt_notifier);
+
outreg:
release_region(io, 2);
outirq:
free_irq(irq, NULL);
-
-outmisc:
- misc_deregister(&eurwdt_miscdev);
goto out;
}
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
deleted file mode 100644
index a62ef48a15ae..000000000000
--- a/drivers/char/watchdog/i8xx_tco.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * i8xx_tco: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@redhat.com>
- *
- * The TCO timer is implemented in the following I/O controller hubs:
- * (See the intel documentation on http://developer.intel.com.)
- * 82801AA (ICH) : document number 290655-003, 290677-014,
- * 82801AB (ICHO) : document number 290655-003, 290677-014,
- * 82801BA (ICH2) : document number 290687-002, 298242-027,
- * 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
- * 82801CA (ICH3-S) : document number 290733-003, 290739-013,
- * 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
- * 82801DB (ICH4) : document number 290744-001, 290745-020,
- * 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
- * 82801E (C-ICH) : document number 273599-001, 273645-002,
- * 82801EB (ICH5) : document number 252516-001, 252517-003,
- * 82801ER (ICH5R) : document number 252516-001, 252517-003,
- *
- * 20000710 Nils Faerber
- * Initial Version 0.01
- * 20000728 Nils Faerber
- * 0.02 Fix for SMI_EN->TCO_EN bit, some cleanups
- * 20011214 Matt Domsch <Matt_Domsch@dell.com>
- * 0.03 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- * Didn't add timeout option as i810_margin already exists.
- * 20020224 Joel Becker, Wim Van Sebroeck
- * 0.04 Support for 82801CA(M) chipset, timer margin needs to be > 3,
- * add support for WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT.
- * 20020412 Rob Radez <rob@osinvestor.com>, Wim Van Sebroeck
- * 0.05 Fix possible timer_alive race, add expect close support,
- * clean up ioctls (WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS and
- * WDIOC_SETOPTIONS), made i810tco_getdevice __init,
- * removed boot_status, removed tco_timer_read,
- * added support for 82801DB and 82801E chipset,
- * added support for 82801EB and 8280ER chipset,
- * general cleanup.
- * 20030921 Wim Van Sebroeck <wim@iguana.be>
- * 0.06 change i810_margin to heartbeat, use module_param,
- * added notify system support, renamed module to i8xx_tco.
- * 20050128 Wim Van Sebroeck <wim@iguana.be>
- * 0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
- * chipsets. Also added support for the "undocumented" ICH7 chipset.
- * 20050807 Wim Van Sebroeck <wim@iguana.be>
- * 0.08 Make sure that the watchdog is only "armed" when started.
- * (Kernel Bug 4251)
- * 20060416 Wim Van Sebroeck <wim@iguana.be>
- * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
- * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
- * chipsets)
- */
-
-/*
- * Includes, defines, variables, module parameters, ...
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include "i8xx_tco.h"
-
-/* Module and version information */
-#define TCO_VERSION "0.09"
-#define TCO_MODULE_NAME "i8xx TCO timer"
-#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
-#define PFX TCO_MODULE_NAME ": "
-
-/* internal variables */
-static unsigned int ACPIBASE;
-static spinlock_t tco_lock; /* Guards the hardware */
-static unsigned long timer_alive;
-static char tco_expect_close;
-static struct pci_dev *i8xx_tco_pci;
-
-/* module parameters */
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (2<heartbeat<39) */
-static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/*
- * Some TCO specific functions
- */
-
-static inline unsigned char seconds_to_ticks(int seconds)
-{
- /* the internal timer is stored as ticks which decrement
- * every 0.6 seconds */
- return (seconds * 10) / 6;
-}
-
-static int tco_timer_start (void)
-{
- unsigned char val;
-
- spin_lock(&tco_lock);
-
- /* disable chipset's NO_REBOOT bit */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
- val &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
-
- /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
- val = inb (TCO1_CNT + 1);
- val &= 0xf7;
- outb (val, TCO1_CNT + 1);
- val = inb (TCO1_CNT + 1);
-
- spin_unlock(&tco_lock);
-
- if (val & 0x08)
- return -1;
- return 0;
-}
-
-static int tco_timer_stop (void)
-{
- unsigned char val, val1;
-
- spin_lock(&tco_lock);
- /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
- val = inb (TCO1_CNT + 1);
- val |= 0x08;
- outb (val, TCO1_CNT + 1);
- val = inb (TCO1_CNT + 1);
-
- /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- val1 |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
-
- spin_unlock(&tco_lock);
-
- if ((val & 0x08) == 0)
- return -1;
- return 0;
-}
-
-static int tco_timer_keepalive (void)
-{
- spin_lock(&tco_lock);
- /* Reload the timer by writing to the TCO Timer Reload register */
- outb (0x01, TCO1_RLD);
- spin_unlock(&tco_lock);
- return 0;
-}
-
-static int tco_timer_set_heartbeat (int t)
-{
- unsigned char val;
- unsigned char tmrval;
-
- tmrval = seconds_to_ticks(t);
- /* from the specs: */
- /* "Values of 0h-3h are ignored and should not be attempted" */
- if (tmrval > 0x3f || tmrval < 0x04)
- return -EINVAL;
-
- /* Write new heartbeat to watchdog */
- spin_lock(&tco_lock);
- val = inb (TCO1_TMR);
- val &= 0xc0;
- val |= tmrval;
- outb (val, TCO1_TMR);
- val = inb (TCO1_TMR);
- spin_unlock(&tco_lock);
-
- if ((val & 0x3f) != tmrval)
- return -EINVAL;
-
- heartbeat = t;
- return 0;
-}
-
-static int tco_timer_get_timeleft (int *time_left)
-{
- unsigned char val;
-
- spin_lock(&tco_lock);
-
- /* read the TCO Timer */
- val = inb (TCO1_RLD);
- val &= 0x3f;
-
- spin_unlock(&tco_lock);
-
- *time_left = (int)((val * 6) / 10);
-
- return 0;
-}
-
-/*
- * /dev/watchdog handling
- */
-
-static int i8xx_tco_open (struct inode *inode, struct file *file)
-{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &timer_alive))
- return -EBUSY;
-
- /*
- * Reload and activate timer
- */
- tco_timer_keepalive ();
- tco_timer_start ();
- return nonseekable_open(inode, file);
-}
-
-static int i8xx_tco_release (struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- */
- if (tco_expect_close == 42) {
- tco_timer_stop ();
- } else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
- tco_timer_keepalive ();
- }
- clear_bit(0, &timer_alive);
- tco_expect_close = 0;
- return 0;
-}
-
-static ssize_t i8xx_tco_write (struct file *file, const char __user *data,
- size_t len, loff_t * ppos)
-{
- /* See if we got the magic character 'V' and reload the timer */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* note: just in case someone wrote the magic character
- * five months ago... */
- tco_expect_close = 0;
-
- /* scan to see whether or not we got the magic character */
- for (i = 0; i != len; i++) {
- char c;
- if(get_user(c, data+i))
- return -EFAULT;
- if (c == 'V')
- tco_expect_close = 42;
- }
- }
-
- /* someone wrote to us, we should reload the timer */
- tco_timer_keepalive ();
- }
- return len;
-}
-
-static int i8xx_tco_ioctl (struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int new_options, retval = -EINVAL;
- int new_heartbeat;
- int time_left;
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = TCO_MODULE_NAME,
- };
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ident,
- sizeof (ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user (0, p);
-
- case WDIOC_KEEPALIVE:
- tco_timer_keepalive ();
- return 0;
-
- case WDIOC_SETOPTIONS:
- {
- if (get_user (new_options, p))
- return -EFAULT;
-
- if (new_options & WDIOS_DISABLECARD) {
- tco_timer_stop ();
- retval = 0;
- }
-
- if (new_options & WDIOS_ENABLECARD) {
- tco_timer_keepalive ();
- tco_timer_start ();
- retval = 0;
- }
-
- return retval;
- }
-
- case WDIOC_SETTIMEOUT:
- {
- if (get_user(new_heartbeat, p))
- return -EFAULT;
-
- if (tco_timer_set_heartbeat(new_heartbeat))
- return -EINVAL;
-
- tco_timer_keepalive ();
- /* Fall */
- }
-
- case WDIOC_GETTIMEOUT:
- return put_user(heartbeat, p);
-
- case WDIOC_GETTIMELEFT:
- {
- if (tco_timer_get_timeleft(&time_left))
- return -EINVAL;
-
- return put_user(time_left, p);
- }
-
- default:
- return -ENOTTY;
- }
-}
-
-/*
- * Notify system
- */
-
-static int i8xx_tco_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
-{
- if (code==SYS_DOWN || code==SYS_HALT) {
- /* Turn the WDT off */
- tco_timer_stop ();
- }
-
- return NOTIFY_DONE;
-}
-
-/*
- * Kernel Interfaces
- */
-
-static const struct file_operations i8xx_tco_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = i8xx_tco_write,
- .ioctl = i8xx_tco_ioctl,
- .open = i8xx_tco_open,
- .release = i8xx_tco_release,
-};
-
-static struct miscdevice i8xx_tco_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &i8xx_tco_fops,
-};
-
-static struct notifier_block i8xx_tco_notifier = {
- .notifier_call = i8xx_tco_notify_sys,
-};
-
-/*
- * Data for PCI driver interface
- *
- * This data only exists for exporting the supported
- * PCI ids via MODULE_DEVICE_TABLE. We do not actually
- * register a pci_driver, because someone else might one day
- * want to register another driver on the same PCI id.
- */
-static struct pci_device_id i8xx_tco_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1) },
- { }, /* End of list */
-};
-MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl);
-
-/*
- * Init & exit routines
- */
-
-static unsigned char __init i8xx_tco_getdevice (void)
-{
- struct pci_dev *dev = NULL;
- u8 val1, val2;
- u16 badr;
- /*
- * Find the PCI device
- */
-
- for_each_pci_dev(dev)
- if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
- i8xx_tco_pci = dev;
- break;
- }
-
- if (i8xx_tco_pci) {
- /*
- * Find the ACPI base I/O address which is the base
- * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
- * ACPIBASE is bits [15:7] from 0x40-0x43
- */
- pci_read_config_byte (i8xx_tco_pci, 0x40, &val1);
- pci_read_config_byte (i8xx_tco_pci, 0x41, &val2);
- badr = ((val2 << 1) | (val1 >> 7)) << 7;
- ACPIBASE = badr;
- /* Something's wrong here, ACPIBASE has to be set */
- if (badr == 0x0001 || badr == 0x0000) {
- printk (KERN_ERR PFX "failed to get TCOBASE address\n");
- pci_dev_put(i8xx_tco_pci);
- return 0;
- }
-
- /* Check chipset's NO_REBOOT bit */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- val1 &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- printk (KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
- pci_dev_put(i8xx_tco_pci);
- return 0; /* Cannot reset NO_REBOOT bit */
- }
- }
- /* Disable reboots untill the watchdog starts */
- val1 |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
-
- /* Set the TCO_EN bit in SMI_EN register */
- if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- SMI_EN + 1);
- pci_dev_put(i8xx_tco_pci);
- return 0;
- }
- val1 = inb (SMI_EN + 1);
- val1 &= 0xdf;
- outb (val1, SMI_EN + 1);
- release_region (SMI_EN + 1, 1);
- return 1;
- }
- return 0;
-}
-
-static int __init watchdog_init (void)
-{
- int ret;
-
- spin_lock_init(&tco_lock);
-
- /* Check whether or not the hardware watchdog is there */
- if (!i8xx_tco_getdevice () || i8xx_tco_pci == NULL)
- return -ENODEV;
-
- if (!request_region (TCOBASE, 0x10, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- TCOBASE);
- ret = -EIO;
- goto out;
- }
-
- /* Clear out the (probably old) status */
- outb (0, TCO1_STS);
- outb (3, TCO2_STS);
-
- /* Check that the heartbeat value is within it's range ; if not reset to the default */
- if (tco_timer_set_heartbeat (heartbeat)) {
- heartbeat = WATCHDOG_HEARTBEAT;
- tco_timer_set_heartbeat (heartbeat);
- printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39, using %d\n",
- heartbeat);
- }
-
- ret = register_reboot_notifier(&i8xx_tco_notifier);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
- goto unreg_region;
- }
-
- ret = misc_register(&i8xx_tco_miscdev);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- goto unreg_notifier;
- }
-
- tco_timer_stop ();
-
- printk (KERN_INFO PFX "initialized (0x%04x). heartbeat=%d sec (nowayout=%d)\n",
- TCOBASE, heartbeat, nowayout);
-
- return 0;
-
-unreg_notifier:
- unregister_reboot_notifier(&i8xx_tco_notifier);
-unreg_region:
- release_region (TCOBASE, 0x10);
-out:
- pci_dev_put(i8xx_tco_pci);
- return ret;
-}
-
-static void __exit watchdog_cleanup (void)
-{
- /* Stop the timer before we leave */
- if (!nowayout)
- tco_timer_stop ();
-
- /* Deregister */
- misc_deregister (&i8xx_tco_miscdev);
- unregister_reboot_notifier(&i8xx_tco_notifier);
- release_region (TCOBASE, 0x10);
-
- pci_dev_put(i8xx_tco_pci);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_cleanup);
-
-MODULE_AUTHOR("Nils Faerber");
-MODULE_DESCRIPTION("TCO timer driver for i8xx chipsets");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/i8xx_tco.h b/drivers/char/watchdog/i8xx_tco.h
deleted file mode 100644
index cc14eb8ac3d6..000000000000
--- a/drivers/char/watchdog/i8xx_tco.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * i8xx_tco: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@redhat.com>
- *
- * For history and the complete list of supported I/O Controller Hub's
- * see i8xx_tco.c
- */
-
-
-/*
- * Some address definitions for the TCO
- */
-
-#define TCOBASE ACPIBASE + 0x60 /* TCO base address */
-#define TCO1_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
-#define TCO1_TMR TCOBASE + 0x01 /* TCO Timer Initial Value */
-#define TCO1_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
-#define TCO1_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
-#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
-#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
-#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
-#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
-
-#define SMI_EN ACPIBASE + 0x30 /* SMI Control and Enable Register */
diff --git a/drivers/char/watchdog/ibmasr.c b/drivers/char/watchdog/ibmasr.c
index 8195f5023d85..94155f6136c2 100644
--- a/drivers/char/watchdog/ibmasr.c
+++ b/drivers/char/watchdog/ibmasr.c
@@ -367,18 +367,17 @@ static int __init ibmasr_init(void)
if (!asr_type)
return -ENODEV;
+ rc = asr_get_base_address();
+ if (rc)
+ return rc;
+
rc = misc_register(&asr_miscdev);
if (rc < 0) {
+ release_region(asr_base, asr_length);
printk(KERN_ERR PFX "failed to register misc device\n");
return rc;
}
- rc = asr_get_base_address();
- if (rc) {
- misc_deregister(&asr_miscdev);
- return rc;
- }
-
return 0;
}
diff --git a/drivers/char/watchdog/machzwd.c b/drivers/char/watchdog/machzwd.c
index 76c7fa37fa6c..a0d27160c80e 100644
--- a/drivers/char/watchdog/machzwd.c
+++ b/drivers/char/watchdog/machzwd.c
@@ -440,13 +440,6 @@ static int __init zf_init(void)
spin_lock_init(&zf_lock);
spin_lock_init(&zf_port_lock);
- ret = misc_register(&zf_miscdev);
- if (ret){
- printk(KERN_ERR "can't misc_register on minor=%d\n",
- WATCHDOG_MINOR);
- goto out;
- }
-
if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
printk(KERN_ERR "cannot reserve I/O ports at %d\n",
ZF_IOBASE);
@@ -461,16 +454,23 @@ static int __init zf_init(void)
goto no_reboot;
}
+ ret = misc_register(&zf_miscdev);
+ if (ret){
+ printk(KERN_ERR "can't misc_register on minor=%d\n",
+ WATCHDOG_MINOR);
+ goto no_misc;
+ }
+
zf_set_status(0);
zf_set_control(0);
return 0;
+no_misc:
+ unregister_reboot_notifier(&zf_notifier);
no_reboot:
release_region(ZF_IOBASE, 3);
no_region:
- misc_deregister(&zf_miscdev);
-out:
return ret;
}
diff --git a/drivers/char/watchdog/mtx-1_wdt.c b/drivers/char/watchdog/mtx-1_wdt.c
new file mode 100644
index 000000000000..419ab445c944
--- /dev/null
+++ b/drivers/char/watchdog/mtx-1_wdt.c
@@ -0,0 +1,238 @@
+/*
+ * Driver for the MTX-1 Watchdog.
+ *
+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
+ * http://www.4g-systems.biz
+ *
+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
+ *
+ * Release 0.01.
+ * Author: Michael Stickel michael.stickel@4g-systems.biz
+ *
+ * Release 0.02.
+ * Author: Florian Fainelli florian@openwrt.org
+ * use the Linux watchdog/timer APIs
+ *
+ * The Watchdog is configured to reset the MTX-1
+ * if it is not triggered for 100 seconds.
+ * It should not be triggered more often than 1.6 seconds.
+ *
+ * A timer triggers the watchdog every 5 seconds, until
+ * it is opened for the first time. After the first open
+ * it MUST be triggered every 2..95 seconds.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/watchdog.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#define MTX1_WDT_INTERVAL (5 * HZ)
+
+static int ticks = 100 * HZ;
+
+static struct {
+ struct completion stop;
+ volatile int running;
+ struct timer_list timer;
+ volatile int queue;
+ int default_ticks;
+ unsigned long inuse;
+} mtx1_wdt_device;
+
+static void mtx1_wdt_trigger(unsigned long unused)
+{
+ u32 tmp;
+
+ if (mtx1_wdt_device.running)
+ ticks--;
+ /*
+ * toggle GPIO2_15
+ */
+ tmp = au_readl(GPIO2_DIR);
+ tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15));
+ au_writel (tmp, GPIO2_DIR);
+
+ if (mtx1_wdt_device.queue && ticks)
+ mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
+ else {
+ complete(&mtx1_wdt_device.stop);
+ }
+}
+
+static void mtx1_wdt_reset(void)
+{
+ ticks = mtx1_wdt_device.default_ticks;
+}
+
+
+static void mtx1_wdt_start(void)
+{
+ if (!mtx1_wdt_device.queue) {
+ mtx1_wdt_device.queue = 1;
+ au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR);
+ mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
+ }
+ mtx1_wdt_device.running++;
+}
+
+static int mtx1_wdt_stop(void)
+{
+ if (mtx1_wdt_device.queue) {
+ mtx1_wdt_device.queue = 0;
+ au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR);
+ }
+
+ ticks = mtx1_wdt_device.default_ticks;
+
+ return 0;
+}
+
+/* Filesystem functions */
+
+static int mtx1_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &mtx1_wdt_device.inuse))
+ return -EBUSY;
+
+ return nonseekable_open(inode, file);
+}
+
+
+static int mtx1_wdt_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &mtx1_wdt_device.inuse);
+ return 0;
+}
+
+static int mtx1_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ unsigned int value;
+ static struct watchdog_info ident =
+ {
+ .options = WDIOF_CARDRESET,
+ .identity = "MTX-1 WDT",
+ };
+
+ switch(cmd) {
+ case WDIOC_KEEPALIVE:
+ mtx1_wdt_reset();
+ break;
+ case WDIOC_GETSTATUS:
+ if ( copy_to_user(argp, &value, sizeof(int)) )
+ return -EFAULT;
+ break;
+ case WDIOC_GETSUPPORT:
+ if ( copy_to_user(argp, &ident, sizeof(ident)) )
+ return -EFAULT;
+ break;
+ case WDIOC_SETOPTIONS:
+ if ( copy_from_user(&value, argp, sizeof(int)) )
+ return -EFAULT;
+ switch(value) {
+ case WDIOS_ENABLECARD:
+ mtx1_wdt_start();
+ break;
+ case WDIOS_DISABLECARD:
+ return mtx1_wdt_stop();
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+
+static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+{
+ if (!count)
+ return -EIO;
+
+ mtx1_wdt_reset();
+ return count;
+}
+
+static struct file_operations mtx1_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .ioctl = mtx1_wdt_ioctl,
+ .open = mtx1_wdt_open,
+ .write = mtx1_wdt_write,
+ .release = mtx1_wdt_release
+};
+
+
+static struct miscdevice mtx1_wdt_misc = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &mtx1_wdt_fops
+};
+
+
+static int __init mtx1_wdt_init(void)
+{
+ int ret;
+
+ if ((ret = misc_register(&mtx1_wdt_misc)) < 0) {
+ printk(KERN_ERR " mtx-1_wdt : failed to register\n");
+ return ret;
+ }
+
+ init_completion(&mtx1_wdt_device.stop);
+ mtx1_wdt_device.queue = 0;
+
+ clear_bit(0, &mtx1_wdt_device.inuse);
+
+ setup_timer(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0L);
+
+ mtx1_wdt_device.default_ticks = ticks;
+
+ mtx1_wdt_start();
+
+ printk(KERN_INFO "MTX-1 Watchdog driver\n");
+
+ return 0;
+}
+
+static void __exit mtx1_wdt_exit(void)
+{
+ if (mtx1_wdt_device.queue) {
+ mtx1_wdt_device.queue = 0;
+ wait_for_completion(&mtx1_wdt_device.stop);
+ }
+ misc_deregister(&mtx1_wdt_misc);
+}
+
+module_init(mtx1_wdt_init);
+module_exit(mtx1_wdt_exit);
+
+MODULE_AUTHOR("Michael Stickel, Florian Fainelli");
+MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c
index 6e8b5705b5b7..7b41434fac8c 100644
--- a/drivers/char/watchdog/pcwd.c
+++ b/drivers/char/watchdog/pcwd.c
@@ -59,10 +59,10 @@
#include <linux/jiffies.h> /* For jiffies stuff */
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
#include <linux/watchdog.h> /* For the watchdog specific items */
-#include <linux/notifier.h> /* For notifier support */
-#include <linux/reboot.h> /* For reboot_notifier stuff */
+#include <linux/reboot.h> /* For kernel_power_off() */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
+#include <linux/isa.h> /* For isa devices */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
@@ -70,8 +70,8 @@
#include <asm/io.h> /* For inb/outb/... */
/* Module and version information */
-#define WATCHDOG_VERSION "1.18"
-#define WATCHDOG_DATE "21 Jan 2007"
+#define WATCHDOG_VERSION "1.20"
+#define WATCHDOG_DATE "18 Feb 2007"
#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
#define WATCHDOG_NAME "pcwd"
#define PFX WATCHDOG_NAME ": "
@@ -89,6 +89,15 @@
#define PCWD_REVISION_C 2
/*
+ * These are the auto-probe addresses available.
+ *
+ * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
+ * Revision A has an address range of 2 addresses, while Revision C has 4.
+ */
+#define PCWD_ISA_NR_CARDS 3
+static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
+
+/*
* These are the defines that describe the control status bits for the
* PCI-PC Watchdog card.
*/
@@ -485,7 +494,7 @@ static int pcwd_get_status(int *status)
if (control_status & WD_T110) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
- printk (KERN_INFO PFX "Temperature overheat trip!\n");
+ printk(KERN_INFO PFX "Temperature overheat trip!\n");
kernel_power_off();
/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
}
@@ -497,7 +506,7 @@ static int pcwd_get_status(int *status)
if (control_status & WD_REVC_TTRP) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
- printk (KERN_INFO PFX "Temperature overheat trip!\n");
+ printk(KERN_INFO PFX "Temperature overheat trip!\n");
kernel_power_off();
/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
}
@@ -734,20 +743,6 @@ static int pcwd_temp_close(struct inode *inode, struct file *file)
}
/*
- * Notify system
- */
-
-static int pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
-{
- if (code==SYS_DOWN || code==SYS_HALT) {
- /* Turn the WDT off */
- pcwd_stop();
- }
-
- return NOTIFY_DONE;
-}
-
-/*
* Kernel Interfaces
*/
@@ -780,10 +775,6 @@ static struct miscdevice temp_miscdev = {
.fops = &pcwd_temp_fops,
};
-static struct notifier_block pcwd_notifier = {
- .notifier_call = pcwd_notify_sys,
-};
-
/*
* Init & exit routines
*/
@@ -803,10 +794,67 @@ static inline int get_revision(void)
return r;
}
-static int __devinit pcwatchdog_init(int base_addr)
+/*
+ * The ISA cards have a heartbeat bit in one of the registers, which
+ * register is card dependent. The heartbeat bit is monitored, and if
+ * found, is considered proof that a Berkshire card has been found.
+ * The initial rate is once per second at board start up, then twice
+ * per second for normal operation.
+ */
+static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
+{
+ int base_addr=pcwd_ioports[id];
+ int port0, last_port0; /* Reg 0, in case it's REV A */
+ int port1, last_port1; /* Register 1 for REV C cards */
+ int i;
+ int retval;
+
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n",
+ id);
+
+ if (!request_region (base_addr, 4, "PCWD")) {
+ printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
+ return 0;
+ }
+
+ retval = 0;
+
+ port0 = inb_p(base_addr); /* For REV A boards */
+ port1 = inb_p(base_addr + 1); /* For REV C boards */
+ if (port0 != 0xff || port1 != 0xff) {
+ /* Not an 'ff' from a floating bus, so must be a card! */
+ for (i = 0; i < 4; ++i) {
+
+ msleep(500);
+
+ last_port0 = port0;
+ last_port1 = port1;
+
+ port0 = inb_p(base_addr);
+ port1 = inb_p(base_addr + 1);
+
+ /* Has either hearbeat bit changed? */
+ if ((port0 ^ last_port0) & WD_HRTBT ||
+ (port1 ^ last_port1) & WD_REVC_HRBT) {
+ retval = 1;
+ break;
+ }
+ }
+ }
+ release_region (base_addr, 4);
+
+ return retval;
+}
+
+static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
{
int ret;
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_probe id=%d\n",
+ id);
+
cards_found++;
if (cards_found == 1)
printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER);
@@ -816,11 +864,13 @@ static int __devinit pcwatchdog_init(int base_addr)
return -ENODEV;
}
- if (base_addr == 0x0000) {
+ if (pcwd_ioports[id] == 0x0000) {
printk(KERN_ERR PFX "No I/O-Address for card detected\n");
return -ENODEV;
}
- pcwd_private.io_addr = base_addr;
+ pcwd_private.io_addr = pcwd_ioports[id];
+
+ spin_lock_init(&pcwd_private.io_lock);
/* Check card's revision */
pcwd_private.revision = get_revision();
@@ -828,8 +878,8 @@ static int __devinit pcwatchdog_init(int base_addr)
if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
pcwd_private.io_addr);
- pcwd_private.io_addr = 0x0000;
- return -EIO;
+ ret=-EIO;
+ goto error_request_region;
}
/* Initial variables */
@@ -865,24 +915,12 @@ static int __devinit pcwatchdog_init(int base_addr)
WATCHDOG_HEARTBEAT);
}
- ret = register_reboot_notifier(&pcwd_notifier);
- if (ret) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return ret;
- }
-
if (pcwd_private.supports_temp) {
ret = misc_register(&temp_miscdev);
if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
- unregister_reboot_notifier(&pcwd_notifier);
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return ret;
+ goto error_misc_register_temp;
}
}
@@ -890,22 +928,34 @@ static int __devinit pcwatchdog_init(int base_addr)
if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
- if (pcwd_private.supports_temp)
- misc_deregister(&temp_miscdev);
- unregister_reboot_notifier(&pcwd_notifier);
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return ret;
+ goto error_misc_register_watchdog;
}
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
return 0;
+
+error_misc_register_watchdog:
+ if (pcwd_private.supports_temp)
+ misc_deregister(&temp_miscdev);
+error_misc_register_temp:
+ release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+error_request_region:
+ pcwd_private.io_addr = 0x0000;
+ cards_found--;
+ return ret;
}
-static void __devexit pcwatchdog_exit(void)
+static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
{
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_remove id=%d\n",
+ id);
+
+ if (!pcwd_private.io_addr)
+ return 1;
+
/* Disable the board */
if (!nowayout)
pcwd_stop();
@@ -914,102 +964,50 @@ static void __devexit pcwatchdog_exit(void)
misc_deregister(&pcwd_miscdev);
if (pcwd_private.supports_temp)
misc_deregister(&temp_miscdev);
- unregister_reboot_notifier(&pcwd_notifier);
release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
pcwd_private.io_addr = 0x0000;
cards_found--;
+
+ return 0;
}
-/*
- * The ISA cards have a heartbeat bit in one of the registers, which
- * register is card dependent. The heartbeat bit is monitored, and if
- * found, is considered proof that a Berkshire card has been found.
- * The initial rate is once per second at board start up, then twice
- * per second for normal operation.
- */
-static int __init pcwd_checkcard(int base_addr)
+static void pcwd_isa_shutdown(struct device *dev, unsigned int id)
{
- int port0, last_port0; /* Reg 0, in case it's REV A */
- int port1, last_port1; /* Register 1 for REV C cards */
- int i;
- int retval;
-
- if (!request_region (base_addr, 4, "PCWD")) {
- printk (KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
- return 0;
- }
-
- retval = 0;
-
- port0 = inb_p(base_addr); /* For REV A boards */
- port1 = inb_p(base_addr + 1); /* For REV C boards */
- if (port0 != 0xff || port1 != 0xff) {
- /* Not an 'ff' from a floating bus, so must be a card! */
- for (i = 0; i < 4; ++i) {
-
- msleep(500);
-
- last_port0 = port0;
- last_port1 = port1;
-
- port0 = inb_p(base_addr);
- port1 = inb_p(base_addr + 1);
-
- /* Has either hearbeat bit changed? */
- if ((port0 ^ last_port0) & WD_HRTBT ||
- (port1 ^ last_port1) & WD_REVC_HRBT) {
- retval = 1;
- break;
- }
- }
- }
- release_region (base_addr, 4);
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_shutdown id=%d\n",
+ id);
- return retval;
+ pcwd_stop();
}
-/*
- * These are the auto-probe addresses available.
- *
- * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
- * Revision A has an address range of 2 addresses, while Revision C has 4.
- */
-static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
+static struct isa_driver pcwd_isa_driver = {
+ .match = pcwd_isa_match,
+ .probe = pcwd_isa_probe,
+ .remove = __devexit_p(pcwd_isa_remove),
+ .shutdown = pcwd_isa_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = WATCHDOG_NAME,
+ },
+};
static int __init pcwd_init_module(void)
{
- int i, found = 0;
-
- spin_lock_init(&pcwd_private.io_lock);
-
- for (i = 0; pcwd_ioports[i] != 0; i++) {
- if (pcwd_checkcard(pcwd_ioports[i])) {
- if (!(pcwatchdog_init(pcwd_ioports[i])))
- found++;
- }
- }
-
- if (!found) {
- printk (KERN_INFO PFX "No card detected, or port not available\n");
- return -ENODEV;
- }
-
- return 0;
+ return isa_register_driver(&pcwd_isa_driver, PCWD_ISA_NR_CARDS);
}
static void __exit pcwd_cleanup_module(void)
{
- if (pcwd_private.io_addr)
- pcwatchdog_exit();
-
+ isa_unregister_driver(&pcwd_isa_driver);
printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
}
module_init(pcwd_init_module);
module_exit(pcwd_cleanup_module);
-MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>");
+MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
+MODULE_VERSION(WATCHDOG_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS_MISCDEV(TEMP_MINOR);
diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c
index 31037f9c9ffe..1e7a6719d5ba 100644
--- a/drivers/char/watchdog/pcwd_usb.c
+++ b/drivers/char/watchdog/pcwd_usb.c
@@ -146,7 +146,7 @@ struct usb_pcwd_private {
atomic_t cmd_received; /* true if we received a report after a command */
int exists; /* Wether or not the device exists */
- struct semaphore sem; /* locks this structure */
+ struct mutex mtx; /* locks this structure */
};
static struct usb_pcwd_private *usb_pcwd_device;
@@ -635,7 +635,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi
usb_pcwd_device = usb_pcwd;
- init_MUTEX (&usb_pcwd->sem);
+ mutex_init(&usb_pcwd->mtx);
usb_pcwd->udev = udev;
usb_pcwd->interface = interface;
usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber;
@@ -763,7 +763,7 @@ static void usb_pcwd_disconnect(struct usb_interface *interface)
usb_pcwd = usb_get_intfdata (interface);
usb_set_intfdata (interface, NULL);
- down (&usb_pcwd->sem);
+ mutex_lock(&usb_pcwd->mtx);
/* Stop the timer before we leave */
if (!nowayout)
@@ -777,7 +777,7 @@ static void usb_pcwd_disconnect(struct usb_interface *interface)
misc_deregister(&usb_pcwd_temperature_miscdev);
unregister_reboot_notifier(&usb_pcwd_notifier);
- up (&usb_pcwd->sem);
+ mutex_unlock(&usb_pcwd->mtx);
/* Delete the USB PCWD device */
usb_pcwd_delete(usb_pcwd);
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index dff6cb5dc9a7..20fa29ca7404 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -379,14 +379,14 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
DBG("probe: mapped wdt_base=%p\n", wdt_base);
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL) {
+ wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (wdt_irq == NULL) {
printk(KERN_INFO PFX "failed to get irq resource\n");
ret = -ENOENT;
goto err_map;
}
- ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev);
+ ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
if (ret != 0) {
printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
goto err_map;
diff --git a/drivers/char/watchdog/sbc8360.c b/drivers/char/watchdog/sbc8360.c
index 67ae42685e75..285d85289532 100644
--- a/drivers/char/watchdog/sbc8360.c
+++ b/drivers/char/watchdog/sbc8360.c
@@ -333,18 +333,17 @@ static int __init sbc8360_init(void)
int res;
unsigned long int mseconds = 60000;
- spin_lock_init(&sbc8360_lock);
- res = misc_register(&sbc8360_miscdev);
- if (res) {
- printk(KERN_ERR PFX "failed to register misc device\n");
- goto out_nomisc;
+ if (timeout < 0 || timeout > 63) {
+ printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
+ res = -EINVAL;
+ goto out;
}
if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) {
printk(KERN_ERR PFX "ENABLE method I/O %X is not available.\n",
SBC8360_ENABLE);
res = -EIO;
- goto out_noenablereg;
+ goto out;
}
if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) {
printk(KERN_ERR PFX
@@ -360,10 +359,11 @@ static int __init sbc8360_init(void)
goto out_noreboot;
}
- if (timeout < 0 || timeout > 63) {
- printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
- res = -EINVAL;
- goto out_noreboot;
+ spin_lock_init(&sbc8360_lock);
+ res = misc_register(&sbc8360_miscdev);
+ if (res) {
+ printk(KERN_ERR PFX "failed to register misc device\n");
+ goto out_nomisc;
}
wd_margin = wd_times[timeout][0];
@@ -383,13 +383,13 @@ static int __init sbc8360_init(void)
return 0;
+ out_nomisc:
+ unregister_reboot_notifier(&sbc8360_notifier);
out_noreboot:
- release_region(SBC8360_ENABLE, 1);
release_region(SBC8360_BASETIME, 1);
- out_noenablereg:
out_nobasetimereg:
- misc_deregister(&sbc8360_miscdev);
- out_nomisc:
+ release_region(SBC8360_ENABLE, 1);
+ out:
return res;
}
diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c
index 337ee42c90dd..b46e7f47d705 100644
--- a/drivers/char/watchdog/w83627hf_wdt.c
+++ b/drivers/char/watchdog/w83627hf_wdt.c
@@ -1,5 +1,8 @@
/*
- * w83627hf WDT driver
+ * w83627hf/thf WDT driver
+ *
+ * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
+ * added support for W83627THF.
*
* (c) Copyright 2003 Pdraig Brady <P@draigBrady.com>
*
@@ -39,7 +42,7 @@
#include <asm/uaccess.h>
#include <asm/system.h>
-#define WATCHDOG_NAME "w83627hf WDT"
+#define WATCHDOG_NAME "w83627hf/thf WDT"
#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
@@ -50,7 +53,7 @@ static spinlock_t io_lock;
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
module_param(wdt_io, int, 0);
-MODULE_PARM_DESC(wdt_io, "w83627hf WDT io port (default 0x2E)");
+MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
@@ -71,9 +74,19 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _
static void
w83627hf_select_wd_register(void)
{
+ unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
outb_p(0x87, WDT_EFER); /* Again according to manual */
+ outb(0x20, WDT_EFER); /* check chip version */
+ c = inb(WDT_EFDR);
+ if (c == 0x82) { /* W83627THF */
+ outb_p(0x2b, WDT_EFER); /* select GPIO3 */
+ c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
+ outb_p(0x2b, WDT_EFER);
+ outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
+ }
+
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
outb_p(0x30, WDT_EFER); /* select CR30 */
@@ -311,7 +324,7 @@ wdt_init(void)
spin_lock_init(&io_lock);
- printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n");
+ printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF Super I/O chip initialising.\n");
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
@@ -367,5 +380,5 @@ module_exit(wdt_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pdraig Brady <P@draigBrady.com>");
-MODULE_DESCRIPTION("w83627hf WDT driver");
+MODULE_DESCRIPTION("w83627hf/thf WDT driver");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);