diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml | 11 | ||||
| -rw-r--r-- | drivers/regulator/rtq2208-regulator.c | 66 |
2 files changed, 60 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml index 609c06615bdc..87accc6f13b8 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml @@ -75,6 +75,12 @@ properties: description: regulator description for ldo[1-2]. + properties: + richtek,fixed-microvolt: + description: | + This property can be used to set a fixed operating voltage that lies outside + the range of the regulator's adjustable mode. + required: - compatible - reg @@ -177,6 +183,8 @@ examples: }; }; ldo1 { + /* Fixed LDO VOUT */ + richtek,fixed-microvolt = <1200000>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -185,7 +193,8 @@ examples: }; }; ldo2 { - regulator-min-microvolt = <3300000>; + /* Adjustable LDO VOUT */ + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-mem { diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c index b90e53d922d6..a5c126afc648 100644 --- a/drivers/regulator/rtq2208-regulator.c +++ b/drivers/regulator/rtq2208-regulator.c @@ -219,7 +219,7 @@ static const struct regulator_ops rtq2208_regulator_buck_ops = { .set_suspend_mode = rtq2208_set_suspend_mode, }; -static const struct regulator_ops rtq2208_regulator_ldo_ops = { +static const struct regulator_ops rtq2208_regulator_ldo_fix_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -228,6 +228,28 @@ static const struct regulator_ops rtq2208_regulator_ldo_ops = { .set_suspend_disable = rtq2208_set_suspend_disable, }; +static const struct regulator_ops rtq2208_regulator_ldo_adj_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_suspend_enable = rtq2208_set_suspend_enable, + .set_suspend_disable = rtq2208_set_suspend_disable, +}; + +static const unsigned int rtq2208_ldo_volt_table[] = { + 1800000, + 3300000, +}; + +static struct of_regulator_match rtq2208_ldo_match[] = { + {.name = "ldo2", }, + {.name = "ldo1", }, +}; + static unsigned int rtq2208_of_map_mode(unsigned int mode) { switch (mode) { @@ -322,13 +344,13 @@ static irqreturn_t rtq2208_irq_handler(int irqno, void *devid) return IRQ_HANDLED; } -static int rtq2208_of_get_fixed_voltage(struct device *dev, - struct of_regulator_match *rtq2208_ldo_match, int n_fixed) +static int rtq2208_of_get_ldo_dvs_ability(struct device *dev) { struct device_node *np; struct of_regulator_match *match; - struct rtq2208_regulator_desc *rdesc; + struct regulator_desc *desc; struct regulator_init_data *init_data; + u32 fixed_uV; int ret, i; if (!dev->of_node) @@ -338,23 +360,37 @@ static int rtq2208_of_get_fixed_voltage(struct device *dev, if (!np) np = dev->of_node; - ret = of_regulator_match(dev, np, rtq2208_ldo_match, n_fixed); + ret = of_regulator_match(dev, np, rtq2208_ldo_match, ARRAY_SIZE(rtq2208_ldo_match)); of_node_put(np); if (ret < 0) return ret; - for (i = 0; i < n_fixed; i++) { + for (i = 0; i < ARRAY_SIZE(rtq2208_ldo_match); i++) { match = rtq2208_ldo_match + i; init_data = match->init_data; - rdesc = (struct rtq2208_regulator_desc *)match->driver_data; + desc = (struct regulator_desc *)match->desc; - if (!init_data || !rdesc) + if (!init_data || !desc) continue; - if (init_data->constraints.min_uV == init_data->constraints.max_uV) - rdesc->desc.fixed_uV = init_data->constraints.min_uV; + /* specify working fixed voltage if the propery exists */ + ret = of_property_read_u32(match->of_node, "richtek,fixed-microvolt", &fixed_uV); + + if (!ret) { + if (fixed_uV != init_data->constraints.min_uV || + fixed_uV != init_data->constraints.max_uV) + return -EINVAL; + desc->n_voltages = 1; + desc->fixed_uV = fixed_uV; + desc->fixed_uV = init_data->constraints.min_uV; + desc->ops = &rtq2208_regulator_ldo_fix_ops; + } else { + desc->n_voltages = ARRAY_SIZE(rtq2208_ldo_volt_table); + desc->volt_table = rtq2208_ldo_volt_table; + desc->ops = &rtq2208_regulator_ldo_adj_ops; + } } return 0; @@ -388,8 +424,7 @@ static const struct linear_range rtq2208_vout_range[] = { REGULATOR_LINEAR_RANGE(1310000, 181, 255, 10000), }; -static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, int mtp_sel, - int idx, struct of_regulator_match *rtq2208_ldo_match, int *ldo_idx) +static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, int mtp_sel, int idx) { struct regulator_desc *desc; static const struct { @@ -461,8 +496,7 @@ static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, in static int rtq2208_parse_regulator_dt_data(int n_regulator, const unsigned int *regulator_idx_table, struct rtq2208_regulator_desc *rdesc[RTQ2208_LDO_MAX], struct device *dev) { - struct of_regulator_match rtq2208_ldo_match[2]; - int mtp_sel, ret, i, idx, ldo_idx = 0; + int mtp_sel, i, idx, ret; /* get mtp_sel0 or mtp_sel1 */ mtp_sel = device_property_read_bool(dev, "richtek,mtp-sel-high"); @@ -474,7 +508,7 @@ static int rtq2208_parse_regulator_dt_data(int n_regulator, const unsigned int * if (!rdesc[i]) return -ENOMEM; - rtq2208_init_regulator_desc(rdesc[i], mtp_sel, idx, rtq2208_ldo_match, &ldo_idx); + rtq2208_init_regulator_desc(rdesc[i], mtp_sel, idx); /* init ldo dvs ability */ if (idx >= RTQ2208_LDO2) @@ -482,7 +516,7 @@ static int rtq2208_parse_regulator_dt_data(int n_regulator, const unsigned int * } /* init ldo fixed_uV */ - ret = rtq2208_of_get_fixed_voltage(dev, rtq2208_ldo_match, ldo_idx); + ret = rtq2208_of_get_ldo_dvs_ability(dev); if (ret) return dev_err_probe(dev, ret, "Failed to get ldo fixed_uV\n"); |