mac80211: refactor association

Refactor the code to reserve an skb of the right size
(instead of hoping 200 bytes are enough forever), and
also put HT IE generation into an own function.

Additionally, put the HT IE before the vendor-specific
WMM IE. This still leaves things not quite ordered
correctly, due to user-specified IEs, add a note about
that for now.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 130 insertions, 109 deletions

diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index 874345918e83..c03c22d5bca3 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -100,6 +100,102 @@ static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len,
 
 /* frame sending functions */
 
+static void ieee80211_add_ht_ie(struct sk_buff *skb, const u8 *ht_info_ie,
+				struct ieee80211_supported_band *sband,
+				struct ieee80211_channel *channel,
+				enum ieee80211_smps_mode smps)
+{
+	struct ieee80211_ht_info *ht_info;
+	u8 *pos;
+	u32 flags = channel->flags;
+	u16 cap = sband->ht_cap.cap;
+	__le16 tmp;
+
+	if (!sband->ht_cap.ht_supported)
+		return;
+
+	if (!ht_info_ie)
+		return;
+
+	if (ht_info_ie[1] < sizeof(struct ieee80211_ht_info))
+		return;
+
+	ht_info = (struct ieee80211_ht_info *)(ht_info_ie + 2);
+
+	/* determine capability flags */
+
+	if (ieee80211_disable_40mhz_24ghz &&
+	    sband->band == IEEE80211_BAND_2GHZ) {
+		cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+		cap &= ~IEEE80211_HT_CAP_SGI_40;
+	}
+
+	switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+		if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
+			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+			cap &= ~IEEE80211_HT_CAP_SGI_40;
+		}
+		break;
+	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+		if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
+			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+			cap &= ~IEEE80211_HT_CAP_SGI_40;
+		}
+		break;
+	}
+
+	/* set SM PS mode properly */
+	cap &= ~IEEE80211_HT_CAP_SM_PS;
+	switch (smps) {
+	case IEEE80211_SMPS_AUTOMATIC:
+	case IEEE80211_SMPS_NUM_MODES:
+		WARN_ON(1);
+	case IEEE80211_SMPS_OFF:
+		cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
+		break;
+	case IEEE80211_SMPS_STATIC:
+		cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
+		break;
+	case IEEE80211_SMPS_DYNAMIC:
+		cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
+		break;
+	}
+
+	/* reserve and fill IE */
+
+	pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
+	*pos++ = WLAN_EID_HT_CAPABILITY;
+	*pos++ = sizeof(struct ieee80211_ht_cap);
+	memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+
+	/* capability flags */
+	tmp = cpu_to_le16(cap);
+	memcpy(pos, &tmp, sizeof(u16));
+	pos += sizeof(u16);
+
+	/* AMPDU parameters */
+	*pos++ = sband->ht_cap.ampdu_factor |
+		 (sband->ht_cap.ampdu_density <<
+			IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
+
+	/* MCS set */
+	memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+	pos += sizeof(sband->ht_cap.mcs);
+
+	/* extended capabilities */
+	pos += sizeof(__le16);
+
+	/* BF capabilities */
+	pos += sizeof(__le32);
+
+	/* antenna selection */
+	pos += sizeof(u8);
+}
+
 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 				 struct ieee80211_work *wk)
 {
@@ -107,15 +203,34 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos;
-	const u8 *ies, *ht_ie;
+	const u8 *ies;
 	int i, len, count, rates_len, supp_rates_len;
 	u16 capab;
 	struct ieee80211_supported_band *sband;
 	u32 rates = 0;
 
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom +
-			    sizeof(*mgmt) + 200 + wk->ie_len +
-			    wk->assoc.ssid_len);
+	sband = local->hw.wiphy->bands[wk->chan->band];
+
+	/*
+	 * Get all rates supported by the device and the AP as
+	 * some APs don't like getting a superset of their rates
+	 * in the association request (e.g. D-Link DAP 1353 in
+	 * b-only mode)...
+	 */
+	rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates,
+					       wk->assoc.supp_rates_len,
+					       sband, &rates);
+
+	skb = alloc_skb(local->hw.extra_tx_headroom +
+			sizeof(*mgmt) + /* bit too much but doesn't matter */
+			2 + wk->assoc.ssid_len + /* SSID */
+			4 + rates_len + /* (extended) rates */
+			4 + /* power capability */
+			2 + 2 * sband->n_channels + /* supported channels */
+			2 + sizeof(struct ieee80211_ht_cap) + /* HT */
+			wk->ie_len + /* extra IEs */
+			9, /* WMM */
+			GFP_KERNEL);
 	if (!skb) {
 		printk(KERN_DEBUG "%s: failed to allocate buffer for assoc "
 		       "frame\n", sdata->name);
@@ -123,8 +238,6 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 	}
 	skb_reserve(skb, local->hw.extra_tx_headroom);
 
-	sband = local->hw.wiphy->bands[wk->chan->band];
-
 	capab = WLAN_CAPABILITY_ESS;
 
 	if (sband->band == IEEE80211_BAND_2GHZ) {
@@ -137,16 +250,6 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 	if (wk->assoc.capability & WLAN_CAPABILITY_PRIVACY)
 		capab |= WLAN_CAPABILITY_PRIVACY;
 
-	/*
-	 * Get all rates supported by the device and the AP as
-	 * some APs don't like getting a superset of their rates
-	 * in the association request (e.g. D-Link DAP 1353 in
-	 * b-only mode)...
-	 */
-	rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates,
-					       wk->assoc.supp_rates_len,
-					       sband, &rates);
-
 	if ((wk->assoc.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
 	    (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
 		capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
@@ -220,7 +323,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 		*pos++ = WLAN_EID_PWR_CAPABILITY;
 		*pos++ = 2;
 		*pos++ = 0; /* min tx power */
-		*pos++ = local->hw.conf.channel->max_power; /* max tx power */
+		*pos++ = wk->chan->max_power; /* max tx power */
 
 		/* 2. supported channels */
 		/* TODO: get this in reg domain format */
@@ -234,11 +337,21 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
+	/*
+	 * XXX:	These IEs could contain (vendor-specified)
+	 *	IEs that belong after HT -- the buffer may
+	 *	need to be split up.
+	 */
 	if (wk->ie_len && wk->ie) {
 		pos = skb_put(skb, wk->ie_len);
 		memcpy(pos, wk->ie, wk->ie_len);
 	}
 
+	if (wk->assoc.use_11n && wk->assoc.wmm_used &&
+	    local->hw.queues >= 4)
+		ieee80211_add_ht_ie(skb, wk->assoc.ht_information_ie,
+				    sband, wk->chan, wk->assoc.smps);
+
 	if (wk->assoc.wmm_used && local->hw.queues >= 4) {
 		pos = skb_put(skb, 9);
 		*pos++ = WLAN_EID_VENDOR_SPECIFIC;
@@ -252,98 +365,6 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
 		*pos++ = 0;
 	}
 
-	/* wmm support is a must to HT */
-	/*
-	 * IEEE802.11n does not allow TKIP/WEP as pairwise
-	 * ciphers in HT mode. We still associate in non-ht
-	 * mode (11a/b/g) if any one of these ciphers is
-	 * configured as pairwise.
-	 */
-	if (wk->assoc.use_11n && wk->assoc.wmm_used &&
-	    (local->hw.queues >= 4) &&
-	    sband->ht_cap.ht_supported &&
-	    (ht_ie = wk->assoc.ht_information_ie) &&
-	    ht_ie[1] >= sizeof(struct ieee80211_ht_info)) {
-		struct ieee80211_ht_info *ht_info =
-			(struct ieee80211_ht_info *)(ht_ie + 2);
-		u16 cap = sband->ht_cap.cap;
-		__le16 tmp;
-		u32 flags = local->hw.conf.channel->flags;
-
-		/* determine capability flags */
-
-		if (ieee80211_disable_40mhz_24ghz &&
-		    sband->band == IEEE80211_BAND_2GHZ) {
-			cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-			cap &= ~IEEE80211_HT_CAP_SGI_40;
-		}
-
-		switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
-		case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-			if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
-				cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-				cap &= ~IEEE80211_HT_CAP_SGI_40;
-			}
-			break;
-		case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-			if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
-				cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-				cap &= ~IEEE80211_HT_CAP_SGI_40;
-			}
-			break;
-		}
-
-		/* set SM PS mode properly */
-		cap &= ~IEEE80211_HT_CAP_SM_PS;
-		switch (wk->assoc.smps) {
-		case IEEE80211_SMPS_AUTOMATIC:
-		case IEEE80211_SMPS_NUM_MODES:
-			WARN_ON(1);
-		case IEEE80211_SMPS_OFF:
-			cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
-				IEEE80211_HT_CAP_SM_PS_SHIFT;
-			break;
-		case IEEE80211_SMPS_STATIC:
-			cap |= WLAN_HT_CAP_SM_PS_STATIC <<
-				IEEE80211_HT_CAP_SM_PS_SHIFT;
-			break;
-		case IEEE80211_SMPS_DYNAMIC:
-			cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
-				IEEE80211_HT_CAP_SM_PS_SHIFT;
-			break;
-		}
-
-		/* reserve and fill IE */
-
-		pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
-		*pos++ = WLAN_EID_HT_CAPABILITY;
-		*pos++ = sizeof(struct ieee80211_ht_cap);
-		memset(pos, 0, sizeof(struct ieee80211_ht_cap));
-
-		/* capability flags */
-		tmp = cpu_to_le16(cap);
-		memcpy(pos, &tmp, sizeof(u16));
-		pos += sizeof(u16);
-
-		/* AMPDU parameters */
-		*pos++ = sband->ht_cap.ampdu_factor |
-			 (sband->ht_cap.ampdu_density <<
-				IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
-
-		/* MCS set */
-		memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
-		pos += sizeof(sband->ht_cap.mcs);
-
-		/* extended capabilities */
-		pos += sizeof(__le16);
-
-		/* BF capabilities */
-		pos += sizeof(__le32);
-
-		/* antenna selection */
-		pos += sizeof(u8);
-	}
-
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
 	ieee80211_tx_skb(sdata, skb);
 }