Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 646 insertions, 0 deletions

diff --git a/net/Kconfig b/net/Kconfig
new file mode 100644
index 000000000000..9251b28e8d5d
--- /dev/null
+++ b/net/Kconfig
@@ -0,0 +1,646 @@
+#
+# Network configuration
+#
+
+menu "Networking support"
+
+config NET
+	bool "Networking support"
+	---help---
+	  Unless you really know what you are doing, you should say Y here.
+	  The reason is that some programs need kernel networking support even
+	  when running on a stand-alone machine that isn't connected to any
+	  other computer. If you are upgrading from an older kernel, you
+	  should consider updating your networking tools too because changes
+	  in the kernel and the tools often go hand in hand. The tools are
+	  contained in the package net-tools, the location and version number
+	  of which are given in <file:Documentation/Changes>.
+
+	  For a general introduction to Linux networking, it is highly
+	  recommended to read the NET-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+menu "Networking options"
+	depends on NET
+
+config PACKET
+	tristate "Packet socket"
+	---help---
+	  The Packet protocol is used by applications which communicate
+	  directly with network devices without an intermediate network
+	  protocol implemented in the kernel, e.g. tcpdump.  If you want them
+	  to work, choose Y.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called af_packet.
+
+	  If unsure, say Y.
+
+config PACKET_MMAP
+	bool "Packet socket: mmapped IO"
+	depends on PACKET
+	help
+	  If you say Y here, the Packet protocol driver will use an IO
+	  mechanism that results in faster communication.
+
+	  If unsure, say N.
+
+config UNIX
+	tristate "Unix domain sockets"
+	---help---
+	  If you say Y here, you will include support for Unix domain sockets;
+	  sockets are the standard Unix mechanism for establishing and
+	  accessing network connections.  Many commonly used programs such as
+	  the X Window system and syslog use these sockets even if your
+	  machine is not connected to any network.  Unless you are working on
+	  an embedded system or something similar, you therefore definitely
+	  want to say Y here.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called unix.  Note that several important services won't work
+	  correctly if you say M here and then neglect to load the module.
+
+	  Say Y unless you know what you are doing.
+
+config NET_KEY
+	tristate "PF_KEY sockets"
+	select XFRM
+	---help---
+	  PF_KEYv2 socket family, compatible to KAME ones.
+	  They are required if you are going to use IPsec tools ported
+	  from KAME.
+
+	  Say Y unless you know what you are doing.
+
+config INET
+	bool "TCP/IP networking"
+	---help---
+	  These are the protocols used on the Internet and on most local
+	  Ethernets. It is highly recommended to say Y here (this will enlarge
+	  your kernel by about 144 KB), since some programs (e.g. the X window
+	  system) use TCP/IP even if your machine is not connected to any
+	  other computer. You will get the so-called loopback device which
+	  allows you to ping yourself (great fun, that!).
+
+	  For an excellent introduction to Linux networking, please read the
+	  Linux Networking HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you say Y here and also to "/proc file system support" and
+	  "Sysctl support" below, you can change various aspects of the
+	  behavior of the TCP/IP code by writing to the (virtual) files in
+	  /proc/sys/net/ipv4/*; the options are explained in the file
+	  <file:Documentation/networking/ip-sysctl.txt>.
+
+	  Short answer: say Y.
+
+source "net/ipv4/Kconfig"
+
+#   IPv6 as module will cause a CRASH if you try to unload it
+config IPV6
+	tristate "The IPv6 protocol"
+	depends on INET
+	default m
+	select CRYPTO if IPV6_PRIVACY
+	select CRYPTO_MD5 if IPV6_PRIVACY
+	---help---
+	  This is complemental support for the IP version 6.
+	  You will still be able to do traditional IPv4 networking as well.
+
+	  For general information about IPv6, see
+	  <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
+	  For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
+	  For specific information about IPv6 under Linux, read the HOWTO at
+	  <http://www.bieringer.de/linux/IPv6/>.
+
+	  To compile this protocol support as a module, choose M here: the 
+	  module will be called ipv6.
+
+source "net/ipv6/Kconfig"
+
+menuconfig NETFILTER
+	bool "Network packet filtering (replaces ipchains)"
+	---help---
+	  Netfilter is a framework for filtering and mangling network packets
+	  that pass through your Linux box.
+
+	  The most common use of packet filtering is to run your Linux box as
+	  a firewall protecting a local network from the Internet. The type of
+	  firewall provided by this kernel support is called a "packet
+	  filter", which means that it can reject individual network packets
+	  based on type, source, destination etc. The other kind of firewall,
+	  a "proxy-based" one, is more secure but more intrusive and more
+	  bothersome to set up; it inspects the network traffic much more
+	  closely, modifies it and has knowledge about the higher level
+	  protocols, which a packet filter lacks. Moreover, proxy-based
+	  firewalls often require changes to the programs running on the local
+	  clients. Proxy-based firewalls don't need support by the kernel, but
+	  they are often combined with a packet filter, which only works if
+	  you say Y here.
+
+	  You should also say Y here if you intend to use your Linux box as
+	  the gateway to the Internet for a local network of machines without
+	  globally valid IP addresses. This is called "masquerading": if one
+	  of the computers on your local network wants to send something to
+	  the outside, your box can "masquerade" as that computer, i.e. it
+	  forwards the traffic to the intended outside destination, but
+	  modifies the packets to make it look like they came from the
+	  firewall box itself. It works both ways: if the outside host
+	  replies, the Linux box will silently forward the traffic to the
+	  correct local computer. This way, the computers on your local net
+	  are completely invisible to the outside world, even though they can
+	  reach the outside and can receive replies. It is even possible to
+	  run globally visible servers from within a masqueraded local network
+	  using a mechanism called portforwarding. Masquerading is also often
+	  called NAT (Network Address Translation).
+
+	  Another use of Netfilter is in transparent proxying: if a machine on
+	  the local network tries to connect to an outside host, your Linux
+	  box can transparently forward the traffic to a local server,
+	  typically a caching proxy server.
+
+	  Yet another use of Netfilter is building a bridging firewall. Using
+	  a bridge with Network packet filtering enabled makes iptables "see"
+	  the bridged traffic. For filtering on the lower network and Ethernet
+	  protocols over the bridge, use ebtables (under bridge netfilter
+	  configuration).
+
+	  Various modules exist for netfilter which replace the previous
+	  masquerading (ipmasqadm), packet filtering (ipchains), transparent
+	  proxying, and portforwarding mechanisms. Please see
+	  <file:Documentation/Changes> under "iptables" for the location of
+	  these packages.
+
+	  Make sure to say N to "Fast switching" below if you intend to say Y
+	  here, as Fast switching currently bypasses netfilter.
+
+	  Chances are that you should say Y here if you compile a kernel which
+	  will run as a router and N for regular hosts. If unsure, say N.
+
+if NETFILTER
+
+config NETFILTER_DEBUG
+	bool "Network packet filtering debugging"
+	depends on NETFILTER
+	help
+	  You can say Y here if you want to get additional messages useful in
+	  debugging the netfilter code.
+
+config BRIDGE_NETFILTER
+	bool "Bridged IP/ARP packets filtering"
+	depends on BRIDGE && NETFILTER && INET
+	default y
+	---help---
+	  Enabling this option will let arptables resp. iptables see bridged
+	  ARP resp. IP traffic. If you want a bridging firewall, you probably
+	  want this option enabled.
+	  Enabling or disabling this option doesn't enable or disable
+	  ebtables.
+
+	  If unsure, say N.
+
+source "net/ipv4/netfilter/Kconfig"
+source "net/ipv6/netfilter/Kconfig"
+source "net/decnet/netfilter/Kconfig"
+source "net/bridge/netfilter/Kconfig"
+
+endif
+
+config XFRM
+       bool
+       depends on NET
+
+source "net/xfrm/Kconfig"
+
+source "net/sctp/Kconfig"
+
+config ATM
+	tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  ATM is a high-speed networking technology for Local Area Networks
+	  and Wide Area Networks.  It uses a fixed packet size and is
+	  connection oriented, allowing for the negotiation of minimum
+	  bandwidth requirements.
+
+	  In order to participate in an ATM network, your Linux box needs an
+	  ATM networking card. If you have that, say Y here and to the driver
+	  of your ATM card below.
+
+	  Note that you need a set of user-space programs to actually make use
+	  of ATM.  See the file <file:Documentation/networking/atm.txt> for
+	  further details.
+
+config ATM_CLIP
+	tristate "Classical IP over ATM (EXPERIMENTAL)"
+	depends on ATM && INET
+	help
+	  Classical IP over ATM for PVCs and SVCs, supporting InARP and
+	  ATMARP. If you want to communication with other IP hosts on your ATM
+	  network, you will typically either say Y here or to "LAN Emulation
+	  (LANE)" below.
+
+config ATM_CLIP_NO_ICMP
+	bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
+	depends on ATM_CLIP
+	help
+	  Normally, an "ICMP host unreachable" message is sent if a neighbour
+	  cannot be reached because there is no VC to it in the kernel's
+	  ATMARP table. This may cause problems when ATMARP table entries are
+	  briefly removed during revalidation. If you say Y here, packets to
+	  such neighbours are silently discarded instead.
+
+config ATM_LANE
+	tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
+	depends on ATM
+	help
+	  LAN Emulation emulates services of existing LANs across an ATM
+	  network. Besides operating as a normal ATM end station client, Linux
+	  LANE client can also act as an proxy client bridging packets between
+	  ELAN and Ethernet segments. You need LANE if you want to try MPOA.
+
+config ATM_MPOA
+	tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
+	depends on ATM && INET && ATM_LANE!=n
+	help
+	  Multi-Protocol Over ATM allows ATM edge devices such as routers,
+	  bridges and ATM attached hosts establish direct ATM VCs across
+	  subnetwork boundaries. These shortcut connections bypass routers
+	  enhancing overall network performance.
+
+config ATM_BR2684
+	tristate "RFC1483/2684 Bridged protocols"
+	depends on ATM && INET
+	help
+	  ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483)
+	  This device will act like an ethernet from the kernels point of view,
+	  with the traffic being carried by ATM PVCs (currently 1 PVC/device).
+	  This is sometimes used over DSL lines.  If in doubt, say N.
+
+config ATM_BR2684_IPFILTER
+	bool "Per-VC IP filter kludge"
+	depends on ATM_BR2684
+	help
+	  This is an experimental mechanism for users who need to terminating a
+	  large number of IP-only vcc's.  Do not enable this unless you are sure
+	  you know what you are doing.
+
+config BRIDGE
+	tristate "802.1d Ethernet Bridging"
+	---help---
+	  If you say Y here, then your Linux box will be able to act as an
+	  Ethernet bridge, which means that the different Ethernet segments it
+	  is connected to will appear as one Ethernet to the participants.
+	  Several such bridges can work together to create even larger
+	  networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
+	  As this is a standard, Linux bridges will cooperate properly with
+	  other third party bridge products.
+
+	  In order to use the Ethernet bridge, you'll need the bridge
+	  configuration tools; see <file:Documentation/networking/bridge.txt>
+	  for location. Please read the Bridge mini-HOWTO for more
+	  information.
+
+	  If you enable iptables support along with the bridge support then you
+	  turn your bridge into a bridging IP firewall.
+	  iptables will then see the IP packets being bridged, so you need to
+	  take this into account when setting up your firewall rules.
+	  Enabling arptables support when bridging will let arptables see
+	  bridged ARP traffic in the arptables FORWARD chain.
+
+	  To compile this code as a module, choose M here: the module
+	  will be called bridge.
+
+	  If unsure, say N.
+
+config VLAN_8021Q
+	tristate "802.1Q VLAN Support"
+	---help---
+	  Select this and you will be able to create 802.1Q VLAN interfaces
+	  on your ethernet interfaces.  802.1Q VLAN supports almost
+	  everything a regular ethernet interface does, including
+	  firewalling, bridging, and of course IP traffic.  You will need
+	  the 'vconfig' tool from the VLAN project in order to effectively
+	  use VLANs.  See the VLAN web page for more information:
+	  <http://www.candelatech.com/~greear/vlan.html>
+
+	  To compile this code as a module, choose M here: the module
+	  will be called 8021q.
+
+	  If unsure, say N.
+
+config DECNET
+	tristate "DECnet Support"
+	---help---
+	  The DECnet networking protocol was used in many products made by
+	  Digital (now Compaq).  It provides reliable stream and sequenced
+	  packet communications over which run a variety of services similar
+	  to those which run over TCP/IP.
+
+	  To find some tools to use with the kernel layer support, please
+	  look at Patrick Caulfield's web site:
+	  <http://linux-decnet.sourceforge.net/>.
+
+	  More detailed documentation is available in
+	  <file:Documentation/networking/decnet.txt>.
+
+	  Be sure to say Y to "/proc file system support" and "Sysctl support"
+	  below when using DECnet, since you will need sysctl support to aid
+	  in configuration at run time.
+
+	  The DECnet code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called decnet.
+
+source "net/decnet/Kconfig"
+
+source "net/llc/Kconfig"
+
+config IPX
+	tristate "The IPX protocol"
+	select LLC
+	---help---
+	  This is support for the Novell networking protocol, IPX, commonly
+	  used for local networks of Windows machines.  You need it if you
+	  want to access Novell NetWare file or print servers using the Linux
+	  Novell client ncpfs (available from
+	  <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
+	  within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>).  In order
+	  to do the former, you'll also have to say Y to "NCP file system
+	  support", below.
+
+	  IPX is similar in scope to IP, while SPX, which runs on top of IPX,
+	  is similar to TCP. There is also experimental support for SPX in
+	  Linux (see "SPX networking", below).
+
+	  To turn your Linux box into a fully featured NetWare file server and
+	  IPX router, say Y here and fetch either lwared from
+	  <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
+	  mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
+	  information, read the IPX-HOWTO available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  The IPX driver would enlarge your kernel by about 16 KB. To compile
+	  this driver as a module, choose M here: the module will be called ipx.
+	  Unless you want to integrate your Linux box with a local Novell
+	  network, say N.
+
+source "net/ipx/Kconfig"
+
+config ATALK
+	tristate "Appletalk protocol support"
+	select LLC
+	---help---
+	  AppleTalk is the protocol that Apple computers can use to communicate
+	  on a network.  If your Linux box is connected to such a network and you
+	  wish to connect to it, say Y.  You will need to use the netatalk package
+	  so that your Linux box can act as a print and file server for Macs as
+	  well as access AppleTalk printers.  Check out
+	  <http://www.zettabyte.net/netatalk/> on the WWW for details.
+	  EtherTalk is the name used for AppleTalk over Ethernet and the
+	  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
+	  network using serial links.  EtherTalk and LocalTalk are fully
+	  supported by Linux.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, contains valuable
+	  information as well.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called appletalk. You almost certainly want to compile it as a
+	  module so you can restart your AppleTalk stack without rebooting
+	  your machine. I hear that the GNU boycott of Apple is over, so
+	  even politically correct people are allowed to say Y here.
+
+source "drivers/net/appletalk/Kconfig"
+
+config X25
+	tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  X.25 is a set of standardized network protocols, similar in scope to
+	  frame relay; the one physical line from your box to the X.25 network
+	  entry point can carry several logical point-to-point connections
+	  (called "virtual circuits") to other computers connected to the X.25
+	  network. Governments, banks, and other organizations tend to use it
+	  to connect to each other or to form Wide Area Networks (WANs). Many
+	  countries have public X.25 networks. X.25 consists of two
+	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+	  if you want that) and the lower level data link layer protocol LAPB
+	  (say Y to "LAPB Data Link Driver" below if you want that).
+
+	  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
+	  <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
+	  Information about X.25 for Linux is contained in the files
+	  <file:Documentation/networking/x25.txt> and
+	  <file:Documentation/networking/x25-iface.txt>.
+
+	  One connects to an X.25 network either with a dedicated network card
+	  using the X.21 protocol (not yet supported by Linux) or one can do
+	  X.25 over a standard telephone line using an ordinary modem (say Y
+	  to "X.25 async driver" below) or over Ethernet using an ordinary
+	  Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
+	  Driver" and "LAPB over Ethernet driver" below).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called x25. If unsure, say N.
+
+config LAPB
+	tristate "LAPB Data Link Driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
+	  the lower) part of the X.25 protocol. It offers a reliable
+	  connection service to exchange data frames with one other host, and
+	  it is used to transport higher level protocols (mostly X.25 Packet
+	  Layer, the higher part of X.25, but others are possible as well).
+	  Usually, LAPB is used with specialized X.21 network cards, but Linux
+	  currently supports LAPB only over Ethernet connections. If you want
+	  to use LAPB connections over Ethernet, say Y here and to "LAPB over
+	  Ethernet driver" below. Read
+	  <file:Documentation/networking/lapb-module.txt> for technical
+	  details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lapb.  If unsure, say N.
+
+config NET_DIVERT
+	bool "Frame Diverter (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  The Frame Diverter allows you to divert packets from the
+	  network, that are not aimed at the interface receiving it (in
+	  promisc. mode). Typically, a Linux box setup as an Ethernet bridge
+	  with the Frames Diverter on, can do some *really* transparent www
+	  caching using a Squid proxy for example.
+
+	  This is very useful when you don't want to change your router's
+	  config (or if you simply don't have access to it).
+
+	  The other possible usages of diverting Ethernet Frames are
+	  numberous:
+	  - reroute smtp traffic to another interface
+	  - traffic-shape certain network streams
+	  - transparently proxy smtp connections
+	  - etc...
+
+	  For more informations, please refer to:
+	  <http://diverter.sourceforge.net/>
+	  <http://perso.wanadoo.fr/magpie/EtherDivert.html>
+
+	  If unsure, say N.
+
+config ECONET
+	tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET
+	---help---
+	  Econet is a fairly old and slow networking protocol mainly used by
+	  Acorn computers to access file and print servers. It uses native
+	  Econet network cards. AUN is an implementation of the higher level
+	  parts of Econet that runs over ordinary Ethernet connections, on
+	  top of the UDP packet protocol, which in turn runs on top of the
+	  Internet protocol IP.
+
+	  If you say Y here, you can choose with the next two options whether
+	  to send Econet/AUN traffic over a UDP Ethernet connection or over
+	  a native Econet network card.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called econet.
+
+config ECONET_AUNUDP
+	bool "AUN over UDP"
+	depends on ECONET
+	help
+	  Say Y here if you want to send Econet/AUN traffic over a UDP
+	  connection (UDP is a packet based protocol that runs on top of the
+	  Internet protocol IP) using an ordinary Ethernet network card.
+
+config ECONET_NATIVE
+	bool "Native Econet"
+	depends on ECONET
+	help
+	  Say Y here if you have a native Econet network card installed in
+	  your computer.
+
+config WAN_ROUTER
+	tristate "WAN router"
+	depends on EXPERIMENTAL
+	---help---
+	  Wide Area Networks (WANs), such as X.25, frame relay and leased
+	  lines, are used to interconnect Local Area Networks (LANs) over vast
+	  distances with data transfer rates significantly higher than those
+	  achievable with commonly used asynchronous modem connections.
+	  Usually, a quite expensive external device called a `WAN router' is
+	  needed to connect to a WAN.
+
+	  As an alternative, WAN routing can be built into the Linux kernel.
+	  With relatively inexpensive WAN interface cards available on the
+	  market, a perfectly usable router can be built for less than half
+	  the price of an external router.  If you have one of those cards and
+	  wish to use your Linux box as a WAN router, say Y here and also to
+	  the WAN driver for your card, below.  You will then need the
+	  wan-tools package which is available from <ftp://ftp.sangoma.com/>.
+	  Read <file:Documentation/networking/wan-router.txt> for more
+	  information.
+
+	  To compile WAN routing support as a module, choose M here: the
+	  module will be called wanrouter.
+
+	  If unsure, say N.
+
+menu "QoS and/or fair queueing"
+
+config NET_SCHED
+	bool "QoS and/or fair queueing"
+	---help---
+	  When the kernel has several packets to send out over a network
+	  device, it has to decide which ones to send first, which ones to
+	  delay, and which ones to drop. This is the job of the packet
+	  scheduler, and several different algorithms for how to do this
+	  "fairly" have been proposed.
+
+	  If you say N here, you will get the standard packet scheduler, which
+	  is a FIFO (first come, first served). If you say Y here, you will be
+	  able to choose from among several alternative algorithms which can
+	  then be attached to different network devices. This is useful for
+	  example if some of your network devices are real time devices that
+	  need a certain minimum data flow rate, or if you need to limit the
+	  maximum data flow rate for traffic which matches specified criteria.
+	  This code is considered to be experimental.
+
+	  To administer these schedulers, you'll need the user-level utilities
+	  from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
+	  That package also contains some documentation; for more, check out
+	  <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
+
+	  This Quality of Service (QoS) support will enable you to use
+	  Differentiated Services (diffserv) and Resource Reservation Protocol
+	  (RSVP) on your Linux router if you also say Y to "QoS support",
+	  "Packet classifier API" and to some classifiers below. Documentation
+	  and software is at <http://diffserv.sourceforge.net/>.
+
+	  If you say Y here and to "/proc file system" below, you will be able
+	  to read status information about packet schedulers from the file
+	  /proc/net/psched.
+
+	  The available schedulers are listed in the following questions; you
+	  can say Y to as many as you like. If unsure, say N now.
+
+source "net/sched/Kconfig"
+
+endmenu
+
+menu "Network testing"
+
+config NET_PKTGEN
+	tristate "Packet Generator (USE WITH CAUTION)"
+	depends on PROC_FS
+	---help---
+	  This module will inject preconfigured packets, at a configurable
+	  rate, out of a given interface.  It is used for network interface
+	  stress testing and performance analysis.  If you don't understand
+	  what was just said, you don't need it: say N.
+
+	  Documentation on how to use the packet generator can be found
+	  at <file:Documentation/networking/pktgen.txt>.
+
+	  To compile this code as a module, choose M here: the
+	  module will be called pktgen.
+
+endmenu
+
+endmenu
+
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NETPOLL_RX
+	bool "Netpoll support for trapping incoming packets"
+	default n
+	depends on NETPOLL
+
+config NETPOLL_TRAP
+	bool "Netpoll traffic trapping"
+	default n
+	depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+source "net/ax25/Kconfig"
+
+source "net/irda/Kconfig"
+
+source "net/bluetooth/Kconfig"
+
+source "drivers/net/Kconfig"
+
+endmenu
+