diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-10 16:13:20 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-10 16:13:20 -0700 |
commit | bb7762961d3ce745688e9050e914c1d3f980268d (patch) | |
tree | e841f58cd6188cc44583cd055798b4475a4d68f0 /mm | |
parent | 48c72d1ab4ec86789a23aed0b0b5f31ac083c0c6 (diff) | |
parent | 35d5a9a61490bf39d2e48d7f499c8c801a39ebe9 (diff) | |
download | lwn-bb7762961d3ce745688e9050e914c1d3f980268d.tar.gz lwn-bb7762961d3ce745688e9050e914c1d3f980268d.zip |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
x86: fix system without memory on node0
x86, mm: Fix node_possible_map logic
mm, x86: remove MEMORY_HOTPLUG_RESERVE related code
x86: make sparse mem work in non-NUMA mode
x86: process.c, remove useless headers
x86: merge process.c a bit
x86: use sparse_memory_present_with_active_regions() on UMA
x86: unify 64-bit UMA and NUMA paging_init()
x86: Allow 1MB of slack between the e820 map and SRAT, not 4GB
x86: Sanity check the e820 against the SRAT table using e820 map only
x86: clean up and and print out initial max_pfn_mapped
x86/pci: remove rounding quirk from e820_setup_gap()
x86, e820, pci: reserve extra free space near end of RAM
x86: fix typo in address space documentation
x86: 46 bit physical address support on 64 bits
x86, mm: fault.c, use printk_once() in is_errata93()
x86: move per-cpu mmu_gathers to mm/init.c
x86: move max_pfn_mapped and max_low_pfn_mapped to setup.c
x86: unify noexec handling
x86: remove (null) in /sys kernel_page_tables
...
Diffstat (limited to 'mm')
-rw-r--r-- | mm/page_alloc.c | 69 |
1 files changed, 0 insertions, 69 deletions
diff --git a/mm/page_alloc.c b/mm/page_alloc.c index fe753ecf2aa5..474c7e9dd51a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -149,10 +149,6 @@ static unsigned long __meminitdata dma_reserve; static int __meminitdata nr_nodemap_entries; static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES]; static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES]; -#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE - static unsigned long __meminitdata node_boundary_start_pfn[MAX_NUMNODES]; - static unsigned long __meminitdata node_boundary_end_pfn[MAX_NUMNODES]; -#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */ static unsigned long __initdata required_kernelcore; static unsigned long __initdata required_movablecore; static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES]; @@ -3103,64 +3099,6 @@ void __init sparse_memory_present_with_active_regions(int nid) } /** - * push_node_boundaries - Push node boundaries to at least the requested boundary - * @nid: The nid of the node to push the boundary for - * @start_pfn: The start pfn of the node - * @end_pfn: The end pfn of the node - * - * In reserve-based hot-add, mem_map is allocated that is unused until hotadd - * time. Specifically, on x86_64, SRAT will report ranges that can potentially - * be hotplugged even though no physical memory exists. This function allows - * an arch to push out the node boundaries so mem_map is allocated that can - * be used later. - */ -#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE -void __init push_node_boundaries(unsigned int nid, - unsigned long start_pfn, unsigned long end_pfn) -{ - mminit_dprintk(MMINIT_TRACE, "zoneboundary", - "Entering push_node_boundaries(%u, %lu, %lu)\n", - nid, start_pfn, end_pfn); - - /* Initialise the boundary for this node if necessary */ - if (node_boundary_end_pfn[nid] == 0) - node_boundary_start_pfn[nid] = -1UL; - - /* Update the boundaries */ - if (node_boundary_start_pfn[nid] > start_pfn) - node_boundary_start_pfn[nid] = start_pfn; - if (node_boundary_end_pfn[nid] < end_pfn) - node_boundary_end_pfn[nid] = end_pfn; -} - -/* If necessary, push the node boundary out for reserve hotadd */ -static void __meminit account_node_boundary(unsigned int nid, - unsigned long *start_pfn, unsigned long *end_pfn) -{ - mminit_dprintk(MMINIT_TRACE, "zoneboundary", - "Entering account_node_boundary(%u, %lu, %lu)\n", - nid, *start_pfn, *end_pfn); - - /* Return if boundary information has not been provided */ - if (node_boundary_end_pfn[nid] == 0) - return; - - /* Check the boundaries and update if necessary */ - if (node_boundary_start_pfn[nid] < *start_pfn) - *start_pfn = node_boundary_start_pfn[nid]; - if (node_boundary_end_pfn[nid] > *end_pfn) - *end_pfn = node_boundary_end_pfn[nid]; -} -#else -void __init push_node_boundaries(unsigned int nid, - unsigned long start_pfn, unsigned long end_pfn) {} - -static void __meminit account_node_boundary(unsigned int nid, - unsigned long *start_pfn, unsigned long *end_pfn) {} -#endif - - -/** * get_pfn_range_for_nid - Return the start and end page frames for a node * @nid: The nid to return the range for. If MAX_NUMNODES, the min and max PFN are returned. * @start_pfn: Passed by reference. On return, it will have the node start_pfn. @@ -3185,9 +3123,6 @@ void __meminit get_pfn_range_for_nid(unsigned int nid, if (*start_pfn == -1UL) *start_pfn = 0; - - /* Push the node boundaries out if requested */ - account_node_boundary(nid, start_pfn, end_pfn); } /* @@ -3793,10 +3728,6 @@ void __init remove_all_active_ranges(void) { memset(early_node_map, 0, sizeof(early_node_map)); nr_nodemap_entries = 0; -#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE - memset(node_boundary_start_pfn, 0, sizeof(node_boundary_start_pfn)); - memset(node_boundary_end_pfn, 0, sizeof(node_boundary_end_pfn)); -#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */ } /* Compare two active node_active_regions */ |